Table with glowing table top in the dark. Homemade Glowing Table Features Assembling Countertops of Pine Board

The original "thing" the glowing table by the author of the development is positioned as furniture for the street. This is the meaningless sense, because the evening gatherings behind the luminous table are really great. However, it seems to us that the development is worth more. After all, this uniqueness as it is - the table cannot be repeated: the idea - yes, to make a double - no. The drawing of glowing pockets will be every time different: the tables can be similar, but not identical.

The author of the development is Mike Warren, one of the enthusiasts of the Instructable community - a cheerful cohesive team changing the world with their ideas. They do it with pleasure. They share this with people. They are the first among those who sew, planes, soldering, mastherite, fries and anything.

Mike Warren created a glowing table and presented it with people. Everyone can make this table with their own hands (or force the dearey spouse). The author of a bright idea kindly provided a whole master class.

How to make a glowing table with your own hands

The most important aspect in creating a luminous table with your own hands is the material. Mike used PECKY CYPRESS - cypress, affected by fungus from the inside. The fungus breeds in the body of wood. From this rotting its segments. Damaged pockets should be removed (it is easy, wood softened), formed cavity to pour with a fluorescent composition consisting of resin and phosphor.

In stores and markets supply coarse wood. To collect the table, you will preliminarily need to handle the board of Fugansky. It must be considered when choosing. All edges are necessary: \u200b\u200bjoints will be dense and smooth.

And here we come closely with the Russian mentality: in the photo there are not bad equipment, and for Americans it is normal - such equipment in the house (basement, garage, shed: they have something there is there. Our average man is not the fact that the grinding machines are manual, but also there is no charging for the battery for the battery, what can we talk about joinery pieces? So this stage will have to be ordered: in any woodworking workshop, these boards will lead you to the right state quickly and inexpensively. The next stage is most likely better immediately there and do, because after processing the edges you need to adjust all the boards for one length.

Rotina wood in the lesions foci is carefully removed by a small girlfriend (a screwdriver for example), and then the released cavities blow compressed air. This stage of work is dirty, dusty, so you need to use protective funds (glasses, respirator).

Process itself

Result (photo before and after)

Now the boards must be collected in the table. Docking on the rail (the grooves are knocked out in both boards, they are inserted into the glue on the glue, the boards are connected). Mike used "cookies" (glued rails are rectangular, triangular, and they have cookies). Next, you need to hold the joints to all than you can clamp (the ideal is shown in the photo), and leave for a day for drying (glue should dry completely). If we do not want the table subsequently falling apart, these days do not touch it (despite the hell's impatience of the Creator).

After drying the glue, the surface must be seized (on the photo disc, Mike writes that the fraction is 80; apparently, it is p 80 disk, emery - electrocorundant; no confidence). Then carefully clean: impeccable cleanliness is required - neither dust.

We need a super clean surface to pour the resin.
Mike Warren

Before pouring the resin, it is necessary to protect the surface: some cavities can be through; so that the resin did not pass through and did not spread reverse side Countertops need to be saved by painted scotch, fix it on the ends with acrylic strips; Strips press.

Further, the sacrament of the glow. It will take resin for fill (and say: give resin for fill), simple in mixing (proportions 1: 1). Mike advises to use it in order not to be mistaken with the proportions of the catalyst and resin. In the luminophore, the tips will not be: just choose what kind of likes you like. Powders are a lot, they different colorsAnd your table can not shine at all blue. Mike used on 2 liters of resin 100 g of powder, but this ratio is optional - powder can be taken more, and the table will glow brighter.

The pouring resin is not ready: you need to mix it with a catalyst. The resin and the catalyst should be poured at different tanks. In the resin, pour powder and mix thoroughly. Then pour the catalyst and actively mix for 2 minutes. It is necessary to do this quickly, because after 5-7 minutes, an irreversible chemical reaction will begin. The homogeneous composition must be obtained up to this point. We must not forget about safety: do not work with a resin without gloves.

The resin is better to knead small portions, since its viscosity is insufficient, and the powder can settle, as a result of which the glow will not be uniform. The finished mixture needs to fill the cavities. They can behave in different ways: in some resin it will become absorbed, and in some no one is normal; It will be necessary to just add a resin to where it has absorbed. Mike spent an hour to fill the pockets in the wood. As a tank for resin, you can use wax paper glasses (easy to make nose, it is convenient to pour).

After drying the resin (the next day), you need to remove acrylic stripes and greasy tape. Acrylic is easily separated, and with Scotch, I have to tinker a little.

The opposite side of the table top also needs to be seized. The grinding of both sides should be carried out in several stages, changing on each abrasive to smaller (Mike used discs: p 120, p 180, p 220, p 320, p 400). After the surfaces it is necessary to handle ends.

After grinding, the worktop must be covered with varnish (Mike used a glossy polyurethane; caused a foam brush) and give a layer to dry completely.

After the layer is dry, it should be sprinkled with water and walk in shallow sandpaper, and then clean it carefully, dry and re-apply a layer of varnish. And so several times to achieve the maximum gloss. Each layer of varnish must be dried completely.

On this, the countertop finish and then they are already engaged in accessories - screw the legs. And here everyone is going on with their own way: someone can make the same simple to use the table on the site, and someone can fasten something fantastic and turn this table to the center of the room in the house.

Furniture models that radiate glow always attract us with their unusual look. The glowing table assembled with her own hands can be decorated in the residential room, in the kitchen or on cottage plot. In this instruction, we will explain how to make a glowing table of wood with fluorescent plugs in the worktop.

To "make" a table of glowing, we need to acquire the appropriate tool and materials.

Tool

We purchase or lease the next power tool.

Electrode, with the help of which we make holes for hopps. Using abrasive circles, in the body of wood drill, create decorative recesses.
Schlifmashinka, which, bring the surface of the table top to the perfectly level state.
A hammer.
A set of clamps that will be needed for the screed of boards.
The planer required for the pretreatment of wood.
Electrolovka, desired to cut the ends of the countertop.
Gas burner, which will be bodied by cavity in the tree.
Related tool (screwdriver, chisels, saw, roulette, construction knife, etc.).

Materials

To make a glowing table of wood with your own hands, we select the necessary materials for this:

4 cypress or pine boards with a size of 1500 x 150 x 40 mm. This wood will need us for the manufacture of table tops, which will emit a glow;
metal legs;
epoxy resin in two plastic bottles of 118 ml volume;

plastic cups - 6 pcs.;
fluorescent powder for creating a light background - 100 g;
scotch;
plywood or sheet of plastic - 600 x 1500 mm.

Step-by-step instruction assembly glowing table

Boards connect with hoptes and glue with each other. The shield is tightened by clamps until the glue is completely frozen.
The side edges of the countertops are processed by the plane and grind.

The ends of the table cut the electrolybike at one level. Then grind them.
The cypress tree has resin chambers in its structure. They are cleansed by a semicircular chisel, without disturbing the natural form.
Cavities blow with a vacuum cleaner and dry hairdryer.
We prepare epoxy filler. Mix the resin with a hardener in one-time plastic cups. In addition, add phosphor (per 100 g of resin we consume 10 g of powder).

In order to avoid leakage of the resin, we glue with scotch across the perimeter, lower the pieces of plywood or plastic.
All cavities and cracks in the table top pour fluorescent mixture. Leave wood material At rest for a day. During this time, the solution will finally freeze.
All the surface is processed by grinding until the perfectly smooth plane is obtained.

Tabletop cover 3 layers of furniture varnish.
We form the support frame from the board with a width of 50 mm and more.
Tabletop crepary to the frame and set the legs. As a result, we get the original glowing table made of wood with your own hands.

Features Assembling Countertops from a pine board

If there are difficulties with the acquisition of a cypress board, replace it with a lumber from pine. In order to create notches on the surface pine table top, Apply the gas burner.

On the boards burner burning gasy necessary form. The configuration of cavities depends on the fancy of the wizard. We create cutting down on the surface of wood as stars and various geometric figures. The burned wood surface effectively emphasizes the relief of the structure of the tree, which gives the worktop additional attractiveness.

The table in complete darkness and with weak lighting will look like enchanting installation.

Video for Step-by-Step Table Assembly

Labor costs and value of materials

We calculate what a glowing table from a cypress board with a size of 600 x 1400 mm will cost. The average prices for materials will take from these online stores.

4 Cypress boards 1500 x 150 x 40 mm will cost 1000 rubles.
Epoxy resin Gold Glass, 1.35 kg - 2200 rubles.
Powder of phosphor, 200 g - 800 rubles.
Metal legs - 600 rubles.
Fastening accessories - 200 rubles.

Total costs will be 4800 rubles. (at the date of publication of the article).

As practice has shown, we spent on the manufacture of this table not more than 16 hours.

Also you can assemble with your own hands lED table. The invention of microlamp gives great opportunities for designer design Furniture. Unlike fluorescent countertops, this type of furniture involves the transparent surface of the table. How to make a LED table - a topic for a separate article. In it we will tell you that you need to purchase from materials, what equipment is better to use and how to make the backlight of the table LED ribbon.

How to do wooden table? Such an unusual designer table from a tree can be done at home! This requires boards from cypress, glowing powder (phosphor), wood resin, some tools and desire to make a beautiful wooden table with their own hands.

Glowing Table Glowing Table

Mike Warren (Mike Warren) - author of this idea unusual tablewhich we found on DollarStorecrafts.com. He mixed the glowing powder with wood resin and filled with emptiness with them, which is rich in a cypress wood. It turned out a beautiful wooden table with patterns luminous in the dark. However, at first they need to "recharge" when light.

Simple shape of an unusual glowing table

If you are a happy owner required tools And skills, follow the instructions of Mike Warren. His video structure is at the end!

The process of manufacturing the original wooden table

Carefully sanding the surface of the designer table

Cracks leave intact

Fill the cracks with luminous powder mixed with a resin

Table of oak dies. Moreover, the table is not simple, but glowing in the dark. The procedure for the manufacture of this, undoubtedly interesting product, consider in more detail.

The form is made of fiberboard (round base and glued on the periphery side), you can use any other material that is available.

A bunch of bumps from oak, approximately one thickness. Their sizes may be arbitrary, but the form is approximately square.

Trimming is laid out in the form, first in a circle, and then evenly fill the inner space.

After a complete laid out of the entire surface of the future table, all the cracks are poured with epoxy resin, but not all the depth, it remains not covered with about 5 mm. After drying the resin, the surface is polished in one level. For grinding used Bulgarian with a petal grinding circle.

It is then mixed with a phosphor (pho-7d pho-7d phosphor, it is better to take about 50 microns. The gram of 300 is needed. Triced on the Internet) (as an option, it is possible to order a phosphor to aliexpress) and the cracks are poured on top. After drying, we grind, quench and ready - you can remove the tabletop from the form.

It turns out like this (when light)

Glowing in the dark, the tabletop is not only original, but also practical. Especially if the table is installed with it in the garden, in a gazebo or near the window. The light effect created by a luminescent coating can last up to 12 hours.

In this article, we will not fully describe the process of manufacturing the table itself, and focus only on how to make a luminescent countertop (luminous). The process of manufacturing a luminous coating is extremely simple, but in this case there are some points that should be considered in advance.

Materials and tools

From the materials you will need a countertop itself (in our case, cypress boards were used, which had congenital flaws in the form of resin chambers), as well as transparent epoxy resin and organic fluorescent powder. So that you do not look for it on shopping, let's give a link to a very quality option with free shipping. This powder can maintain a glow from 7 to 12 hours and serve faithfully for 7-10 years.

We will also need paint tape and disposable cups. In addition, the surface at the final stage will need to be covered with varnish.

From the tools: semicircular chisels, grinders (or skin), knife and a couple of brushes.

Preparation

In our case, the preparation process was cleaning the natural resin chambers of cypress from the residues of the dried resin. To do this, we used a conventional screwdriver and blowing. But if you use the ready-made worktop, you will have to cut the cameras on your own using semicircular chisels. We would recommend the depth of cutting from one to one and a half centimeters. In this case, there will be more luminescent composition in the resulting hopes, and, therefore, the glow will be brighter and long.

Cypress has enough deep cameras, which in some places form through holes in the 25-millimeter boards.

Of course, the surface must be sanded, after which the acrylic plates should be fixed on the ends so that the imposed luminescent composition does not flow. The table top at the edges can also be saved by painting scotch.

To prepare a luminescent composition, you need to mix the components epoxy resin in one-time dishes. It is most convenient to use 200 gram paper cups, but you can take half-liter. We poured half a cup of resin and separately half acknowledged hardener. In each of them, powder was added and stirred.

After connecting two components of the resin in one glass, you have about 5-7 minutes to fill in the resulting composition made and treated on the tabletop of the hollow. We have 100 cm in size with deep hinders (which you can see above in the photo) left two liters of epoxy resin and 100 grams of fluorescent powder. It is better not to save and pour more, so that the glow was bright.

Now everything is ready to apply a luminescent composition.

Application

The resulting composition should be accurately poured on the chosen-made slots and hopes. It is important to note that the epoxy will be absorbed into the tree, because you will have to put at least a second layer.

The whole process took about an hour. After that, we walked around about 12 hours, allowing epoxid to harden.

Further work consisted of trimming the edges of the countertop to get rid of the irregularities and sunsteps of the resin, as well as in grinding. In order to achieve a point effect, we had a grinder to remove a sufficiently large layer of the surface, where the epoxy was hit outside the hollow.

Final stage - processing of edges and surface coating with two layers of varnish.