Unusual wooden tables with your own hands. Hand made: we make a coffee table from wood with our own hands. Diy rectangular coffee table

In the age of electronic media, few people bother reading print media. Despite this, coffee tables still take pride of place in every home.

In addition to their direct purpose, they can be used for other useful things: serving a light breakfast or dinner, minor repairs and homemade creativity.

Simplicity of construction, a variety of shapes and designs, a minimum of tools - all these advantages of coffee tables attract the attention of home craftsmen. In our article, we will make a detailed review of popular homemade products and give practical advice on how to make them.

Design options for coffee tables

The easiest way is to make a coffee table with your own hands, using boards made of edged boards, veneered chipboard or MDF.

In order to hide the connection points of the slabs, the classic method is used - assembly on round wooden thorns (dowels). All that is required from a home craftsman in this case is to accurately mark the installation locations of the spikes at the ends of the sidewalls and drill the mounting holes for them in the lower and upper covers.

The simplest coffee table made of MDF board

To increase the rigidity of the structure, a vertical cross member must be installed between its side walls. A small niche for storing magazines and other little things here will not be superfluous. It can be made from the slab left after cutting out the covers and sides.

Mobility is a useful option for a table. It is realized by installing furniture wheels on the bottom. The compact transport wheels can be hidden, or you can buy larger ones and make them stand out on purpose. So we get an original table on wheels made of polished bars that support a massive wooden tabletop.

For those who do not play a big role in mobility, and want to see a solid table in a rustic style in their home, we can offer an option from powerful boards. Such a table will undoubtedly become one of the main decorations in the living room of any country house.

Reasonable laziness combined with a thirst for creativity often leads to interesting discoveries. One of them is a table made from an old tire.

It is assembled very simply:

In the chipboard plate, two circles with a diameter of 3-4 cm less than the outer size of the tire are cut.
Four metal legs are screwed to the first circle.
The bottom and the lid are fastened with self-tapping screws to the sides of the wheel.
The sides and lid are decorated with jute rope.

Homemade construction from an old tire looks great

This creates an unusual coffee table, which, if necessary, can be used as a bench.

The idea of using "random" items to create home furnishings has proven to be extremely productive. She gave birth to numerous homemade crates and pallets. A little imagination and a minimum of costs are required in order to assemble a wooden coffee table based on four standard drawers.

The assembly algorithm looks like this: the boxes are placed on the edge, placing them in a circle one after the other. Having connected the structure with self-tapping screws, a shelf is made in its center. Here you can put a flower vase or pour decor from river pebbles or shells. The work is completed by processing the wood with sandpaper, stain and varnish.

Natural wood does not need sophisticated decor. Using it for interior decoration, complement the decor with a simple table. To assemble it, you will need several planed bars and fence strips.

The base frame will look solid and solid when used in a contrasting color combination with the countertop. To do this, the bars must be tinted with a dark stain, leaving the lid in the natural color of pine logs.

Wood in furniture goes well with metal. You can verify this by making a loft-style coffee table with metal legs. Its lid is assembled from three pieces of grooved board "forty" and framed by a cornice strip.

To make the legs, you will need a welding machine, a piece of steel plate 1.5-2.0 mm thick and several scraps of smooth reinforcing steel with a diameter of 10-14 mm.

Having bent four rods in a pattern, square pieces of plates (or thick carpentry corners as in the photo) are welded to them and alternately attached to a tabletop assembled from a grooved board. For final finishing, you need to grind, tint and varnish the lid, sides and paint the legs.

Instead of a rod for making a base, you can use a rectangular profile pipe. Welding two rectangles from it, cleaning the seams and covering the metal with silver paint, we get reliable supports for the tabletop, assembled from thick oak planks.

To increase stability, the metal sidewalls under the cover are connected with a section of a shaped pipe.

Coffee tables with a saw cut table top look very impressive. Finding this basic element is not difficult. On any sawmill you will be offered a "semi-finished product" of the required size. An electric plane and a belt sander will help you to bring it up to condition.

The legs of the table can be made from thick bars, or you can use a reinforcing bar for them. The contrast between the solid worktop and the light metal base lends the structure a touch of exclusive design.

Another interesting option for combining materials is wood and glass. The table top can be oval or round, resting on a cruciform base of two bar frames.

A mobile coffee table made of a wooden pallet and covered with square glass looks stylish and modern.

Glass gives a rich appearance to the entire structure and closes the gaps between the pallet slats through which small objects can fall onto the floor.

Those who prioritize functionality will surely like the transforming coffee table. Through simple manipulations, it radically changes not only its height, but also its appearance.

When assembled, it is a regular magazine and newspaper holder. By raising the two sides with legs, we increase the height of the table and expand the surface of the tabletop to a "dining format".

The basis of another transforming system is two metal frame-pedestals. Each of them is hinged to the table top. In the assembled position, they lie horizontally, and when the cover is lifted, they rotate on the hinges and stand upright.

The unfolded height of the structure is 73 cm. This is quite enough to use the transformer as a computer desk.

Its lid consists of two slabs that can be shifted horizontally. In this case, one plate pivots on a hinge around its axis. If necessary, such a transformer can be turned into a dining table for 4 persons in a matter of seconds.

Three-in-one transformer coffee table

Someone creates folding adaptive systems, and someone successfully experiments with ordinary plywood scraps. The search for new forms resulted in such an unusual coffee table.

We can only be surprised at the scrupulous accuracy of the calculation and its talented embodiment in a visible image.

In theory, everything looks simple: the base is sequentially glued from three dozen plywood frames. Each of them has a certain angle of inclination of the legs.

In practice, however, a 3D modeling program is needed to calculate all the elements of a plywood base.

The assembled plywood "cake" attracts the eye with an unusual futuristic shape. A glass lid crowns this piece of innovative joinery technology.

“We would have something simpler, but also beautiful,” the home master will say. Please, there is a table, no less elegant, but more affordable to manufacture. It consists of three packages of thin planed boards.

Numerous slots in the type-setting table top can be covered with a glass lid.

A few words must be said about joining glass to wood. The best solution is to use transparent "optical" glue. It is quite difficult to drill through thick glass at home without causing irreparable damage to it. Therefore, abandon the idea of mechanical fixation and allow modern chemistry to show its best qualities.

Self-production

Speaking about the material for the table top, we completely forgot about the wooden Euro lining. It is a great material at hand and is equally useful for creating lids, sides and legs.

Eurolining table top - beautiful and reliable

The shape of the lining tabletop can be any. The cover, assembled from wooden planks, is cut with a jigsaw along a given contour.

To make a coffee table from lining, we need several tools:

screwdriver;
jigsaw;
belt sander;
hacksaw;
roulette.

The dimensions of the finished product and the design of the docking nodes should be thought out in advance and entered into the sketch drawing.

The table is finished in two stages. Before starting the assembly, grind the surface of the lid, bottom and legs with emery paper. After completion of the work, the wood is covered with a toning stain and colorless varnish.

It is even easier to make a coffee table from chipboard. This material performs two functions at once: it forms a continuous surface and bears a load. We recommend using a veneer board, as paint and varnish cannot hide the texture of the wood chips on "bare" chipboard.

After completing the assembly, you need to close all the edges (countertops, bottom and legs) with plastic furniture tape, warming it up with a construction hairdryer before gluing.

Coffee tables are as relevant today as they were many years ago, they can be purchased separately from the upholstered headset or in a set, however, like all other pieces of furniture, the described one has a high cost, despite its small size. That is why you can make it yourself.

Coffee tables have relatively high prices in furniture stores, however, unlike other pieces of furniture, they are quite easy to make yourself.

Preparatory work

In order to make a wooden table yourself, you need to stock up on the following tools and materials:

solid pine;
water-based varnish;
white spirit;
acrylic paint;
brush;
self-tapping screws;
electric jigsaw;
screwdriver;
radial grinder;
milling cutter;
drill.

As for the solid pine, it is necessary to purchase a material whose thickness is 25 mm. The dimensions of the workpiece for this table are equal to 1500x500 mm. This model does not require separate legs. To cover the table, you need 300 g of water-based varnish. Acrylic paint must be purchased with shine, which will give the product a tone, this tool will take about 100 g. how it will be impossible to get rid of sparkles.

Tools for making a coffee table.

The coffee table should be assembled with screws of two sizes: 4x60 and 4x40 mm. For wood processing, an electric jigsaw will be used, which is accompanied by a set of saws designed for clean cutting of wood. It is preferable to use a self-clamping chuck, it is more convenient for the master when carrying out work. In any case, it should be possible to install a drill with a diameter of 10 mm in the chuck. The radial sander can be replaced with a conventional screwdriver, which has an appropriate attachment.

You can also abandon a hand router in favor of a traditional planer, since the first version of the tool is not available to every craftsman. More impressive bevels will need to be removed.

The drills should have the following dimensions: 10 and 5 mm, the first option should be used instead of a separate countersink. A set of bits with an extension cord will also come in handy.

When cutting the material, you do not have to try to calculate the size of the radius, for this you can use a traditional steel hula-hoop as a template.

Preparing for the build process

When making a coffee table, you have to complete two stages of product processing: preliminary and finishing. The first stage includes cutting, beveling and grinding.

It is necessary to remove a chamfer of about 5 mm, it looks aesthetically pleasing and will not "eat up" the thickness of the tabletop externally. Even before the elements are covered with a tone, it is necessary to grind in three approaches in the area of the ends.

Drawing of a coffee table.

It is necessary to carry out such work using the technology below.

After you have managed to grind the sections, you should cover them with a layer of varnish.

It is necessary to be prepared for the fact that the structure of the wood will begin to bulge under the coating. After drying, re-sanding and varnishing should be carried out, this should be done until the smoothness of the cut is achieved. In this case, care must be taken not to damage the plane.

Wooden table mounting technology

When making a coffee table, before proceeding with gluing the elements together, it is necessary to prime the joints with PVA, which can be replaced with wood glue, then the surface must be left to dry. Planks with legs must be paired with self-tapping screws with dimensions 4x40, while when fastening to the table top, fasteners with dimensions 4x60 should be used.

The coffee table should not have a resinous surface; in order to get rid of it, white spirit and a large amount of rags should be used. It is advisable to carry out such work in an open space. Otherwise, the smell will remain in the apartment for a long time.

The varnish must be mixed with the glossy paint and cover the surface of the table. You can experiment a little with the remnants of acrylic by depicting patterns under the final layer of varnish, they will not be very noticeable and intrusive, they can only be seen in reflected light.

Wooden coffee table with legs

Coffee table assembly diagram.

The coffee table can be made by analogy with the above, but in the design it can also have legs. To do this, you have to use a blank from an array of the required size. It is necessary to saw off the material from the element on four sides (and not on two). The size of the table top of such a table can be equal to 950x650 mm. The array in this case should have a thickness of 35-40 mm. The material with dimensions of 1280x980 mm will act as a blank for this table. The legs can be ready-made balusters, which can be purchased in the construction department, their top should be square, the side of which can be limited to 60 mm. The blanks for the legs can be sawed off so that the table is of the required height.

If you radially saw off the tabletop from 4 sides, then instead of the elements that in the first case served as legs, it will be possible to get a ready-made base of the table from four parts. To fasten them, they must be pulled together with confirmations with dimensions of 5x90 mm. In this case, the workpieces should form a rectangle, which should be screwed to the table top using corners. Do not forget that the elements of the "box" part must be sawn off along the length, this will allow, after assembling the table, to obtain a structure of the correct shape.

When installing the legs, use self-tapping screws, mounting them from the inside. The reliability of the base box will be achieved by the fact that the timber structure on long elements is horizontal.

Thus, the model will gain legs. If there is a desire, then such a table can be turned into a dining table at the installation stage, for this it will be necessary to cut off the legs, leaving a more impressive length. When making cuts with a jigsaw, you can make curly movements.

DIY table from drawers

You can also make a table from several wooden boxes. It should be remembered, however, that the plywood of the product is very thin. At the moment of screwing in the self-tapping screws, it can break along. For this reason, it is first necessary to make a hole in order to install the fasteners. If you make two holes in the board from different sides, then this will ensure that the crack does not appear at all.

For work, a sheet of plywood has to be prepared so as not to make the structure heavier. The boxes will not allow you to get a perfect square, therefore, before cutting the sheet, you need to lay them on the workpiece and draw a contour. The plywood must be stained.

For the table, you should purchase casters, which should be too low. It is necessary to strengthen them in the corners with some deviation from the edges. The drawers should be fixed to the lower countertop.

On this we can assume that the table is ready, it is recommended to varnish its surface in several layers. It is permissible to arrange a semi-antique table by covering its surface with a special varnish, which becomes covered with cracks during drying.

Do you love designer items, but sigh in frustration looking at the price tags that adorn them in stores? Try to become a designer yourself. Do you think this is difficult? Nothing like this! Following the instructions, you can easily create do it yourself original a piece of interior from scrap materials. And we suggest starting with coffee table- such an uncomplicated, but very important subject furniture... Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you literally fill your House warmth and put a piece of your soul into it. So it's definitely worth a try.

Do-it-yourself coffee table in a marine style

Idea in the style of "romantic". All year round, sipping your favorite drink at this table, you will remember the warm sea, gentle surf and moonlit path. " Nautical»A table is tenderness, sophistication and originality in the very heart of your home.

How to do it?

1. Take an old window frame and clean it of dust and dirt. If the former glass cracked, insert a new one, and then get rid of the layer of the old paints and sand the surface. Next, remove the metal corners, which additionally fix the parts frames.

Ready! Enjoy your creation and bring joy to your guests!

Suitcase table for travel lovers

A very original solution for an old beloved suitcase, which has seen other lands with you and which you do not want to throw away because of the memories.

How to do it?

First, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a movable table, then you need to take wheels. You will also need plywood, screws and a screwdriver.

Now we make markings at the bottom of the suitcase for future legs and drill holes. Since the legs cannot be attached to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and attach the legs. Using hot glue, glue the felt inside the suitcase.

To give the table an original look reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate at your discretion.

That's all - the unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: by choosing legs to your liking, you can make a table in style retro or classical... You don't have to attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring to the interior a sense of adventures and adventures, the spirit of travel and unknown distant countries.

Log table for nature lovers

We take wooden beams (in this case, birch) of the same height and width, 32 pieces in total. You also need to take the base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wooden surfaces.

First you need to assemble the base for the table, then glue wooden beams around the perimeter, and sew up the middle with cardboard. Then we screw the legs to the bottom. Next, we glue thin wooden dies to the inner surface - thanks to this, it will seem that the table is completely wooden. Now we take the putty and carefully fill up all the voids, and then we rub it until an absolutely flat surface is created. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.

If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).

For pasting the frame, we take the branches, from which we first remove the loose bark (we do this with sandpaper). What is the order of pasting: first we glue the branches on the long side of the table, and then we select wooden dies and, how mosaic, lay them out on the ends. The dies should be about 1 cm thick and can be cut with a parquet or circular saw. And finally - install the glass, which will be the table top. If desired, by screwing the wheel supports to the table, it can be made mobile.

Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.

Original pallet table

An idea that came to mind of someone truly brilliant. It would seem that one can come up with pallets that are probably lying around in every summer cottage? And you can make a very convenient and functional element of the interior out of them.

How to do it?

To get started, collect all the tools necessary for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue designed for wood, wheels, soap, a primer, a screwdriver. In addition, use paint brushes, a petal drill brush with an abrasive bristle brush, varnish, and a colorless primer.

First of all, you should take a drill with an attachment designed for wood processing, and clean the surface of the boards from dirt. Now carefully disassemble the sanded pallet into pieces. Use a large hammer to lightly knock out the rusty nails and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. Clamps are needed at this stage. They need to gently grip the boards and wait until they dry out.

Now the parts prepared for the countertop need to be nailed and glued on the back side, then clamp them with clamps and wait until they dry out.

Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill the holes for the fasteners. Lubricate the screws with soap to make them fit easily into the wood. Using the ratchet wrench, you can quickly and conveniently tighten the hex head screws.

Stylish, compact and quite functional table is ready!

Drawer table

Another original idea captivates with its simplicity and unexpectedness - well, who would ever dream of building a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea at its true worth.

How to do it?

Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.

First you need to oshuk the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. With the help of wood glue, you need to fix the dowels in the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!

Such extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance of turning into an interesting element of the interior?

Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?

To begin with, a lover of self-made furniture should learn how to create a stool, since this is the easiest way. And then comes the time to study the issue of creating a table.

Table designs vary, however, the simple version is very similar to the process of creating a stool.

A simple table for use in the country or during a picnic can be assembled in just a few hours. To do this, you need a hacksaw, hammer or drill.

However, a table based on a similar approach can be made for living quarters. Because it can ideally replace the current very large version purchased at a retail point of sale or furniture store.

The process of creating a table on your own is also interesting from the other side, because with the help of it, the author's freedom of creative expression appears. It can be imagined as a noticeable element of the interior of the room.

The creators of handcrafted amateur furniture are called carpenters for a reason. The usual definitions don't apply to them like: sofa-beds or bedside tables, or maybe cupboards.

Having gained experience in this area, over time it will be possible to create exclusive types of tables with advanced characteristics.

Now we will consider the issue of self-creation of tables based on a tree.

Wood is clean and affordable, and besides, it is not as difficult to process as other materials. It conveys the maximum energy of the aesthetic content of the living room style.

Due to its properties, it is condescending to the mistakes of beginners in the field of self-creation of furniture. However, thinner versions of tables will require an advanced level of skill.

To begin with, having learned how to work with wooden things, then it will be easier to use as a material: glass, plastic or even metal.

Selection of tools and premises for work

To engage in self-creation of tables or other wooden pieces of furniture, you need to use only non-residential premises.

This is due to the specifics of working with wood. It leads to the formation of a large amount of dust, shavings and other waste.

And the process of toning or creating protection for a material based on stain can form hazardous emissions into the air. Actually, nitro lacquers can also be dangerous.

Because of this, for a personal carpentry workshop, you will have to take care of airing the room. Experts advise to create artificial ventilation of the room.

Many people use a garage for this, however, industrial waste can pollute or damage the car, because of this, this is not the best option.

Carpentry tools are modern and traditional.

For the most part, for a start, you can limit yourself to a simple carpentry tool, however, later modern versions may be required in the form of:

A rotary version of the miter box, which helps to create cuts on the basis of two planes, adhering to the required size.

This tool will reveal all its useful properties, especially with a bow saw. This couple is considered universal, it can be useful for many jobs.

A hand-held version of the versatile electric jigsaw, featuring a tilting shoe that helps you create a cut based on the desired angle in relation to the vertical plane.

Disc version of the sander. It will help beginners complete the surface treatment of wood in about 5-15 minutes. An experienced carpenter, along with the skin, can do the same job in about an hour.

And there is also a conventional belt sander for grooves with recessed places, which is distinguished by a protruding version of the working part.

Such tools are distinguished by their price and narrow specialization of work performance; experienced craftsmen recommend taking them for a short lease term.

The very best specialists, using various grinding machines, can even create the effect of artificial aging of wood, however, this is a very difficult job, as for beginners.

Which tree is best for you?

To create a wooden table, any wood with an average resistance to the decay process is suitable, however, you should refrain from soft versions like: poplar, willow, ailant wood, aspen and even alder.

Of domestic types of wood, it is best to use:

soft options in the form of pine, fir, cedar, horse chestnut, sycamore, juniper or spruce.

solid in the form of an ideal oak, suitable for many works of beech, maple, walnut or ash, larch, as well as fruit species such as apple, plum, pear, apricot and quince. And also elm and mountain ash should be included here.

rather hard species based on acacia, yew, stone birch, dogwood and boxwood.

Conclusion

I want to decorate the table and probably all types of furniture made by my own hands with an artistic version of the painting, and not with ordinary stripes.

However, over time, the drawing may deteriorate, so that this does not happen, it is necessary to rub the paint deep into the wood before the varnishing process. This can be done on the basis of the technique - glaze. This is a layer-by-layer rubbing of the paints used.

Photo of tables with your own hands

The table is the second item after the stool that every novice amateur furniture maker should be able to do. The table can be created from different materials and have unique characteristics. It is a great intention for you to want to make your own piece of wood.

A table made of wood is quite easy to create with your own hands, it is enough to have minimal skills in working with carpentry tools. And the cost of the material will be significantly less than the cost of a table using metal, glass or plastic.

A piece of furniture made with your own hands will correspond as closely as possible to the desires of a happy owner, and it will delight the eye incomparably more than what was acquired. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.

What can make a good table

A particularly beautiful tabletop can be made from cheap non-varietal pine boards, knotty and twisted (without falling out knots, rot, fungus, wormholes), which, with good processing, give a wonderful pattern, to achieve which, when working with an expensive tree, you need to make much greater costs and efforts ...

When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.

Soft (spruce, pine, chestnut, dogwood) is easily damaged during operation, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.

Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are difficult to handle on their own. And you may have to look for masters to work with them. But provide the product with durability.

External characteristics

It is very important to determine in advance for yourself the appearance of your future product. The basic rule of a good table is considered if the structure fits well into the space allotted for it and leaves a lot of free space for those who are seated.

It is also important to consider that a table with a rectangular top will accommodate fewer people than a table with a round or oval shape with the same area. And the table for guests will be more expedient to be made in a folding version, which unfolds for big holidays, but in everyday life it is folded. Also, such a folding table will be convenient in the backyard.

Most often, you need to choose a kitchen table. It should be roomy and pleasing to the eye, to facilitate the process of working with him. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.

Based on this, it is absolutely clear that the size of the table is chosen depending on the area of the room. Also, soft wood cannot be used for the kitchen table due to its use in "extreme" conditions.

The choice of the external characteristics of the product is a responsible process, therefore, before starting the personal formation of a table for a summer residence, it is extremely necessary to carefully assess the needs for which this table is being made.

Transferring ideas to paper

When creating a structure that is the fruit of your imagination, you will have to develop a diagram and drawings of your table with your own hands. For which there is a huge variety of electronic programs.

After a thorough development process, it is imperative to transfer the result to paper. It is very important to use this manual constantly for fast and quality work.

Creative process

The preparation of the drawings is the last preparatory step. Then you can start the most important part of the work - the manufacture of parts. Do-it-yourself wooden tables are much easier to create if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.

You can do it yourself personally as a desk, as well as a magazine or children's version. With a certain skill, it is realistic to create a computer desk. And also a dining or country model. Each of the options is fairly easy to implement.

The canvas for the countertop and the board with the beams, from which the rest of the parts will be formed, are processed with an available tool or, at worst, with coarse-grained sandpaper to remove the existing defects in the form of irregularities and protruding knots.

Boards are sanded from all sides, including side edges and corners. If you create a canvas from wood cuts, you need to make sure that they are dry enough, and also repair small cracks found after visual inspection. And it is better to groove them. To get a more reliable adhesion of the web and save time for assembling the elements.

Transfer the scheme to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are ground. The protruding support elements are trimmed by about 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).

The workpieces are covered with a preparation that prevents the ingress of moisture and pests, and only after final drying is it allowed to resume the process of creating the table with your own hands.

Putting the details together

After making all the necessary parts, you can proceed to the sacred service. Namely, to put the desired masterpiece together. And this can be either a round table or any other selected product.

First, you need to assemble the support structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, otherwise there is a chance of splitting the part). For the connection, you can use galvanized screws, since they do not rust, and this is very important for wood products. Or wood glue.

According to the basic rules, the frame in length and width should be 30-25 cm less than the countertop.

On the sides, you need to attach additional boards to give rigidity and to hide the place where the legs are attached. Cut off the chamfers in the places where the legs are installed.

Then the table leg is fixed in place with clamps, and bolt holes are drilled in the frame. Place the supporting elements in their places and fix them with stoppers. Reinforce the structure with wood glue. Then install the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden with wood-colored plugs.

The final stage. Finishing

A photo of the completed table can be seen below. This is surprisingly easy to achieve. Optionally, you can round either only the corners or completely the end, depending on the type of table. It will be nice to make chamfers on the edges of the countertop.

In the entire structure, irregularities are sanded, with the help of a putty, mistakes are hidden. To extend the service life of a self-assembled table, it is necessary to cover it with several layers of varnish or stain.

Thus, making a beautiful wooden table with your own hands is quite a simple pastime. And easy to do. The guarantee of extracting a solid, ideal in size and aesthetic result according to its drawings is: exact adherence to the manual, error-free execution and weighed selected material. And the resulting table will harmoniously fit into the exterior.