How to make a small folding table. How to make a folding table yourself. Production of a roll table

Wooden folding table with your own hands, drawings, diagrams, detailed description of the product, whose feature, is a side of the table top, where the legs are hidden in the assembled form.

Let's look at the design of the table in the context, where the assembly units of the product are depicted:

1. Table lid (table top).
2. Frame (carrier frame).
3. Legs.

Table of table. And its main overall dimensions are shown in the figure.

Table cover

The countertop is made of glued wooden skulls interconnected on the rail. On the perimeter of the lid is fixed "P" shaped aluminum furniture profile 2 x 20 x 20 (mm).

Reference:
When connected wooden details Furniture shield on the rail, you should follow the following dimensions:

BUT - Wood width of a wooden furniture shield
S. - Wooden furniture plank thickness thickness
SO. - Shield thickness after machining
Sp. - Pasting for mechanical processing
Sh - Edge thickness
SI - The thickness of the groove and rail
L. - Width Reiki
LI - Groove depth

A \u003d 12 ... 150 (mm)
SO \u003d S - 2 SP \u003d A ... ⅓ a \u003d 12 ... 60 (mm)
SP \u003d 2 ... 3 (mm)
Sh \u003d si \u003d ⅓ so
L \u003d SO.
Li \u003d ½ L + 1..2mm

Carrier frame

Comprises:

1. Cross Tsarga.
2. Longitudinal Tsarga.
3. Confirmate 7 x 50 (mm).

The inner surface of the transverse king, along the entire length, is plane at an angle of 10 °. From the inside of the longitudinal king, two recesses for the fastening of metal corners are molded. Longitudinal and transverse tsargi connect with each other with Evrovintage (confirm).

Legs

Consist of:

1. Leg.
2. Crossbars.

The crossbars are made of wooden cuttings Ø 16 (mm), which are inserted with a small tension in the holes of the legs, pre-on the surface touch of parts, is applied fine layer of glue.

Wooden folding table with their own hands or the order of assembly according to the drawings:

1. Prepare the necessary material.
2. Let's make assembly details.
3. We collect assembly units.
4. Produce cutting processing Assembly units and apply a decorative paintwork.
5. Tree screw screws 3.5 x 16 (mm), we will attach a four metal corner of 26 x26 x30 (mm) to the bearing frame.
6. The legs will be attached to the carrier frame, with a small tension bolts furniture with a semicircular head and a square headrest 10 x 50 ... 60 (mm) according to the "Bolt - Washer" scheme.

The figure shows the design of the carrier frame with legs folded.

The figure shows the design of the carrier frame with legs in the unfolded form.

7. To metal corners, screw screws with a hidden head of 3.5 x 12 (mm), we screw the worktop.

Wooden folding table assembled. Yes, and also, in this design, you can envisage the legs of the legs. Send us your considerations, all ideas will be published on the pages of our site with copyright.

How to seek bracks for pod.
Stalls, or stones with brazed nodels
It is used in the options. Above
Came of Especially this ecoon
META. It is easy to see for a robby, in Vide
The "books" or with stacking beds.

Extre "Book" in the one's vision remains in the room,
the table with folding legs is usually removed into the storage room.

Therefore, the appearance and design of such tables may noticeably
differ.

You may have a question why the table has such a strange form in the photo
countertops? The fact is that this table has a rather narrow specialization.
It serves as an additional insert between two round tables, see
article. round table On one leg.

When all three tables shifted together
the surface of the table top is 950 mm width. and almost 3000 mm long. .

In the manufacture of folding legs, the tabletop shape does not play a special role,
therefore, it is also possible to make legs and for the usual table.
with a rectangular countertop.

The total length of the table top is 2000 mm. , width 950 mm. . If exclude sharp
"Tails" The length of the table will be 1050 mm.

Wooden folding table with your hands drawings

Table height 760 mm.
Of course, you can make a worktop of any size you need.

When calculating legs need to look two positions, it is the total height of the table
and swelling countertops. Here the table is wide, so the sinks are made at 100 mm. .
And yet, the distance between the legs cannot be less than the length of the legs, otherwise
the legs simply will not be in place.

How to make a small table with folded legsLooking
article Coffee table.

Table legs.

The legs are made in the form of frames collected on spikes, material of birch.
Frames from bars 60 mm wide. and 30 mm thick. . It turns out
classic assembly, top horizontal jumper - Tsarga,
lower - pod.

For fastening legs, I set two transverse table top
bar.

Bruck width should not be less than the width of the legs, i.e. 30 mm. .
The thickness of the bars of one 20 mm. other than 50 mm. . Delta of thickness of 30 mm.
we need so that the legs in the folded state do not interfere with each other.

For this table, one paired leg turned out to be a width of 750 mm.

and 720 mm high. .
Another feet of 750 mm wide. and 690 mm high. . This is based on thickness
countertops 20 mm. , I remind the overall height of the table is 760 mm. .

The legs to the transverse bars are fixed on the piano loops. The loop is necessary
drown so that the legs in the unfolded state of the whole edge rested
in the edges of the bars. If the legs are hanging on the loop, the table will turn out
very unstable.

In order for the table to be stable legs need to be deducted.

Here is shown
the easiest option. Birch board 100 mm wide. with stamped by
the thickness of pride and depth washed 50 mm. . On the prodes are also made
powered in the middle of the upper edge of a depth of 10 mm. .

The table assembled in this way is hard with transverse loads,
but with longitudinal slightly walks through the flexibility of the legs.

For little
the table of one transverse pride can be enough for a large
table fastening is better to strengthen.

In fact, this table when installing is clamped from the ends of two
sufficiently massive round tables, and therefore it's just to walk
nowhere. Actually, I wanted to make a more complex and rigid design.

Folding can be not only tables and chairs, see how to make
floral shelves from the stepladder.

In another embodiment, the transverse frame is glued. This frame is also
installed on the loop from the bottom of the table top and when placing the table
falls between the legs. In this case, the thickness of the transverse bars to which
fasten legs, it is necessary to increase with the calculation to the central frame
she laid under the frame of the legs. At the same time, the prodes must be installed
clamps.

The easiest lock is a self-tapping screw or confirm
twisted outside, through the pod to the end of the central frame.

Another option, instead of one big longitudinal central frame
two drop-down tsargi, here too need to think about the fixing of the Tsarga
to the legs.

Instead of all this, you can install two hips, from the bottom from the middle
countertops Again to Plogs, Ukos are also attached
to the tabletop on the loop.

Commenting and posting links is prohibited.

Table step chipboard, table on kitchen from chipboard, photo of inexpensive table, table folding from chipboard, photo folding table in the kitchen, table price for kitchen

Best photo selection on the topic: folding table for kitchen

It is necessary to clarify what sizes of the folding round table for the kitchen will have, if you push it, as it may turn out that in a small kitchen

Of course, the buyer himself decides, from what material it is better to have a table in the kitchen, but it is important to take into account the strength of the design and durability.

oak, I will buy a table from an array for kitchen, kitchen table catalog, tables for living room, oak tables, folding tables, buy folding table, tables

Care table 1.2, photo folding table, folding table, price folding table, table From postforming, table in the kitchen

Cant-2 Wenge table, buy oak table, buy a table in the kitchen, photo and price of the table, folding tables, table folding from dubby, folding table for kitchen, table

Table Cheremosh-1 apple tree, wooden table, wooden table, buy a table from an array, tables from an array, table manufacturers from an array, table not folding, table

An interesting decision was offered designers of the Furniture Manufacturer CANCIO Having created a folding kitchen table Pilot.

Compact design assembled

Universal color for folding dining wooden table. Oval form is a democratic white. In any color kitchen interior palette,

Table Scyth Rambler, photo folding table, folding table, folding table price, post-standing table, table in the kitchen

Fashion on artificially aged things have long attracted all lovers of beautiful and bright things, and this table is one of the most vivid representatives

Table dining Charlin.

How to make a folding table with your own hands?

Buy table dining, buy table in the kitchen, buy a table in the dining room, buy a wooden table. Online store furniture boom

The round bar table is bought, as a rule, for cafes, bars, restaurants cafe. Standard execution of such tables of frames from

Glass table TB008-5 Champagne Kiev, buy kitchen glass table TB008-5 Kitchen Champagne, Lunch Table ML 308-5 Champagne,

Wooden oval dining table sliding on metal legs in the middle of the kitchen of which is made in gray

Ruta-2 table (ivory), table folding, folding table, table wooden, wooden table, one hundred oak, oak table, table in living room, table on the kitchen, tables from

Type: dining (folding) Material Table topics: MDF Case material: Tree.

Support material: Tree. Color supports: bleached oak. Edge Material: MDF

How to make chipboard with chipboard with their own hands

We had it at the beginning "small" factory computer deskwhich was adopted in Prague.

But over time we realize that this table in our small room takes too much space (more than a meter from the wall). I had to cut him into pieces and make a night table for him.

And at this point, for collecting here, there is such a simple small folding table that you can fold on request, freeing the space in the room. I do not pay attention to the bad calendars, I covered them (during the photo session) with a hole in the wall, on which there was a permanent monitor of the CRT.

This is actually the size of our counters only for clarity, and these sizes and forms are not categorically respected.

The leaf was bought in Obi, I do not know, but, in my opinion, it was originally 90x60 cm. And after the blade spots the edge and cut a small niche behind the back of the chairs, the size of the table was 90x56 cm.

Then, with sandpaper, wrap the wand, the processed ends of this sheet. After that, the red back is painted, with the exception of the back side, as it will be attached to it.

The table was attached to the wall with a chopstick of 45 × 45 mm, because the wall is very soft (chalk) and not quite smooth.

On the wall there are four screws with self-locking screw about 8-10 cm long. Screws are screwed into the base so that self-tapping screws do not stick. After the iron is tightened to the wall, the steaks are glued with glue gluing. Before you have an electric monitor, this column served as a small window frame, which was parked in a vertical position, in the special pockets of the heater, mice and keyboard.

The hinge suspension was attached to the meter, and then on the stick on the wall.

The counter-edge of the meter is supported by two pieces of such chains at the edges.

The length of these segments is chosen by hooks on the wall and corners on the table. This means that the table is built strictly horizontally (plane), and then we measure the length of the chains.

Some such hooks with a thickness of 3.5 mm were wrapped in the wall through the foot.

Why the hooks did not impress me with their appearance to secure the chain on the table, I decided to use the usual railway corner located under the table.

The first was drilled by a 2-3-meter drill with a series of holes in the table, then with the same drill, diagonally selected jumper between the holes. Upon returning the opening with a naked file was slightly trimmed. Thus, we received two longitudinal openings for corners in DSP. Before fixing the corners under the table, the turnips rounded the file (one that is always in front) in the corners.

Then disconnect one link from the chain and place it at the angle.

Massage does not concern the back of the head (if you are sitting back to it).

From tin here is curved, no twisted roll. For which the rack is kept vertically and at the same time at some distance from the wall, which is parallel to the wall. It works perfectly and quite reliable.

After buying this LCD screen (by the way, there is a photo with an old monitor in a diaphragm), the table stopped to fold, because the new monitor was giant and did not hang in the wall.

Thus, this new Benk always settled on this table. They also had to cut a small wall so that the monitor wall moves a little longer than it was installed.

If you decide to draw the same or similar folding table, think about the intended download in advance.

For example, if you want to jump or sit on it, then the chain is better to take immediately, so it is desirable that the links on it are sealed.

Transformer table do it yourself

The same applies to the rest of the structure, hooks, corners, hinges and a table that can be cut thicker and stronger.

In general, the table is very attractive, he does not bother his legs, because he has no legs.

If the so-called window threshold (bar) runs a little more, you can switch it and before this LCD screen. Also at the bottom of the table (bottom) you can stick or tie an image or poster, it is desirable to repeat the circuits of the table (so to speak, for harmony). After raising the table, you do not need to admire the clean and boring chipboard plane. Thus, like the button, it is possible that two birds with one stone, in a composite state, the image is displayed, and in the disassembled form of the grass of the table is straight for its direct target.

Other sites sites

When copying materials from a website you need an active link to the website www.mihaniko.ru.

Make a campaign table with your own hands - and Ida in nature

When someone begins to talk about the "approach" of the tourist or fishing season - it causes it only a smile.

Avoid tourists and fishermen do not recognize any seasons - any weather is good. The main desire. Sit with a fishing rod at least over the hole in the ice, even on the green shore of the lake, decompose a snack and a little hot - not on Earth, understandable, and not on ice. The table is needed by sure, and the compact and lightweight. And it is best to make a similar campaign table with your own hands.

We offer to make such a campaign table

They are sold in a variety, but we need:

1. Suitable in size, not standard.
2. Inexpensive.
3. Multi-purpose.

The optimal size in the unfolded form was introduced to us: the length is 1000 mm, the width is 580 mm and the height is 530 mm.

In folded form, it looks like a suitcase with dimensions, respectively: 580x500x80 mm. In the drawings, the draft, raw option is visible, and how to do it - we will now understand.

Matching table in folded form

List of essential materials

There is everything extremely simple, because we make a table marching, not a parade.

Therefore, we take the phaneer of 10 millimeter thickness and the birch bar with a cross section of 30x30 mm. From plywood we cut two table tops 500x580 mm, and the bar cut as follows:

• 500 mm - 8 pieces, table legs and false parts of the frame under the table top.
• 520 mm - 4 pieces, the inner parts of the frame under the worktop.

Opened table

Since our minimum fittings and fasteners, we will buy them at the same time in order not to go to the store twice:

• Self-tapping screws 4x25 mm
• Self-tapping screws 4x50 mm.
• Loops - butterflies, with a scope of 60x60 mm.
• Hooves Furniture printed, not angular, plastic - 4 pieces.
• Furniture iron handle.

  If there is a handle from the old sac bath, folding, you can use it.

• Stages "Suitcase". They are not sold in furniture fittings, but in the department of accessories for leather goods. You can also use locks taken from any serving suitcase or old sewing machine. We took from a compact film projector.
• Furniture screws (or bolts, if already in the economy) 8x70 mm - 4 pieces.
• Nuts - lamb, respectively, m8 - 4 pieces.

Use of fittings and fasteners

To make a campaign table with your own hands in the draft version - you need the minimum of the tool.

Separate items to allocate it - we will get out of the cabinet as needed.

Chernovaya assembly of a hiking table

We collect the frame, tightening them with a self-drawing of 4x50 mm, one for each angle.

In the outer parts of the frame under them, it is advisable to drill through holes with a dimmeter of 5 millimeters in order not to split the bar. This fastener for the frames is quite enough - the main load will take on a plywood countertop.

We are screwed to the frames of 4x25 mm with the frames of 4x25 mm, and the plane is also drilled - the plane of the drill - a five and a gazon.

Under the screws (bolts) drill in the overhead parts of the hole frame with a diameter of 8 mm, retreating inner corner 15x15 mm. They must coincide with similar holes in the legs.

Before putting the loops - butterflies, put the legs as you can see in the picture.

They should not get on top of each other with a decomposed countertop - why the extra thickness? The loops also screw 4x25 mm screws, simply folding the table halves. Drilling under the hand - and a table in the draft version is ready, but!

Stuffed legs should not fall on each other

Processing of a hiking table

It is perfect that we all coincided and so wonderfully develops and reveals.

This process is still possible to enjoy only at home, in a dry, well-ventilated room. In such a form, our table will withstand two, maximum three excursions in nature.

After you have to do a new, which is pretty hurt.

Matching table ready, but it should still be processed

Water is present everywhere and friendly with wood, only while the tree clings to the roots behind the ground.

Blowjob, blackening and so on - on a deformed table, even to put a jar for worms for worms. Therefore, we treat it and at the same time slightly strengthened.

Before the ideal smoothness, the details can not be grinding, the main thing is to get rid of potential zoom.

But to miss and proceed with exemplary care - in order to serve for a long time and regularly.

For anti-inflict and antiseptic processing, we recommend "Pinotex" and any of its derivatives.

They are not only fighting wood and plywood, but also tonnow the table in the selected color - options mass.

The ends of all the bars and plywood countertops advise before the final varnish to impregnate with Olife. To do this, heat the olive on the water bath to the maximum fluidity (do not think to do it on an open fire or boil it!), And literally launched it with a rigid brush into all the edges absorbing water.

After that, it's good to dry all the details and proceed to the varnish.

Laco does not need to "pour" the surface - it is also necessary to rub it.

How to make a folding table with your own hands: 2 master class

It is better to cover two or three times. You have already understood how to make a campaign table, it remains to realize that this necessary and convenient item will really go with you in multi-day trips. And no one will offer him vodka with pepper or tea with Malina, when he gets sick - the table must be put in a impermeable "Spa Tander" in advance.

Appropriately decorated and processed, it will last you for many years.

And by the way: not only legs are placed inside it. And the wife does not climb in life to look for a snack in something so much glamorous.

In my tourist set for routing on nature there was literally everything. The brazier gave the bat, the skewers I myself have acquired many years ago, and recently bought and folding chairs. Did not take only a folding table. The idea of \u200b\u200bcreating it myself attended me a long time ago, but all the hands did not reach. Once I got the drawings of a suitable table and that's what happened to look next.

And I somehow came into a construction store, where I saw a small folding table, which I really liked. I photographed him, I also bought materials for the manufacture of the same table and went home to embody a long-standing idea.

Design. The substole is two H-shaped frames connected by bolts with nuts at a height of about 2/3 of the leg length. When folding the table, one frame enters the other. The countertop consists of two half. From the bottom side of each of them, the partition of the sections of the halves is attached by two supporting bars, which go beyond the borders of the tabletops towards each other. Free ends (with an indentation from the edge of about 5 cm) these bars are attached to the upper ends of the table legs. The distance between the bars is selected so that they do not interfere with each other and legs when folding the table.

The ends of the inner pair of bars are connected insertion round cross section - When folding the table, it turns out to be top and serves as a handle for its transfer. So that the whole design is mobile and easily laid out, legs and support bars are bolted with nuts with nuts.

- The whole thing consists of two half for its manufacturer came a piece of plywood with a thickness of 6 mm.
- "Internal" legs are connected by a jumper. They provide for the grooves under the jumper of the "external" legs.

- "Internal" support bars countertops will be connected by a handle for carrying a table.
- "External" legs.

Production.Some materials for the table did not have to buy. At home I found a cutting cutter from a chip 024 mm and a 32 cm long for a handle. Also among the remains of the old crafts, a piece of plywood 60x70 cm thick B Mm was found - he went to the manufacture of table tops. I first poured her corners under 45 ° and rounded with a grinding skin. The store drew attention to the tabletop round shape. It looks good too, but I still stopped on a rectangular countertop - it is more space for it, which is important for small sizes of the table, and it is easier to manufacture.

Brucks with a cross section 20x40 mm I purchased in the store. Of these, the billets of supporting bars of 46 cm long-term bruises are made. From one end, it washed up with both corners, rounded them with a grinding skin, washed from another and rounded and rounded only on one side. This end of the bar will be attached to the bottom of the table top, and the rounding there is nothing. So enrolled with each of the four bars.

In order for the legs of the legs and the supporting bars fastened on the halves of the table tops when folding did not fall on each other, they will dismiss them in the width of the table. The supporting bars of one of the halves of the table top, connected by a cutlets, occupy an inner part, outside the legs are located on the outside, and at the edges - the support bars of the second half of the table top. Since the cutting length of the cutting was determined, I started working with half the countertops, the supporting bars on which occupy the average position.

In two billets, the Forsten-Ra drill drilled the deaf holes under the stalk, inserted it and, while not bonding, decomposed on the floor on one part of the table top.

- The sign in the folded position is free to enter each other, and the transverse bars do not interfere with it.
-The dignity pine bolts with nuts that perform the function of the axes.
Then he moved to the manufacture of the feet of the table. They conventionally identified as "external" and "internal". Began with "internal". Screwd the workpiece from the same bar with a cross section of 20x40 mm with a length of 720 mm, with both ends rounded them. After that, at a distance of 160 mm from the lower edge of the legs on the outer edge, a groove was chosen for the transverse bar and the same grooves on the inner edge, but above the first to 50 mm (at a distance of 210 mm from the lower edge) - they will include a transverse bar " External "legs when folding a table.

After that, put the blanks on the floor from the outer sides of the supporting bars already unfolded there, measured the length of the transverse bar and having filled it, attached to the legs with self-drawing. So that the bar when swinging does not crack, previously drilled under the screws of the hole.

For the resulting H-shaped assembly of the "internal" legs, two blanks for the "external" legs were put on the "external" legs and stated the grooves on them under the transverse bar. Choosing the grooves and prepare the crossbar, brought the frame with self-draws.

- In folded form, the upper ends of the support bars protrude above the legs of approximately 30 mm.

Then, 500 mm from the lower edge of the legs drilled through holes. Crapped the legs pairwise bolts, drowned and bolt heads, and nuts in drilled to a small depth of through axial holes. And in the upper parts of both pairs, the legs outlined and drilled holes for fastening the supporting bars of the meters of table top.

-Stole is ready. It is clearly visible the location of his elements relative to another.
- To determine the places of attachment of the countertops to the supporting bars, the backstage set up on the outstanding countertop and made the corresponding marks.

To accurately determine the position of the mounting holes in the supporting bars, folded the legs, put on the floor and put "internal" support bars in them so that they do not reach the lower ends to the nearest transverse bar for 3-5 mm. It is necessary that the design then laid out freely. At the same time, the upper end protrudes over the legs of approximately 30 mm. Through the holes in the upper parts of the legs, the position of the holes in the supporting bars, drilled them and brought the legs and support bars bolts, drowned their heads and nuts. I did not delay much - everything should move freely.

It remained to determine the location of the "external" support bars for the second half of the table top. I set them down with "internal" bars. By analogy, they mounted them.

-Stolik is polished and ready to paint.

Now it was necessary to screw the parts of the table top to the appropriate support bars. To do this, folding both of it on the floor, turned the collected underground and installed it on the composite countertop. After that, made markers on its place. It remains only to attach the parts of the table top to the supporting bars.

In conclusion, everything was carefully treated with grinding and covered with varnish in two layers. The table turned out to be compact, convenient and not very expensive.

The folding table is a convenient and practical thing, irreplaceable in many situations. Folding tables are ideal for small apartments and houses, as not only save space, but are easily transformed into a large dining table if necessary. The table for the picnic folding is easy to fit in the car and will give in nature convenience and comfort. The advantage of this furniture is also in the fact that it is not difficult to make a folding table with your own hands. Only drawings, materials, a set of tools and a desire are needed.

There are a lot of varieties of folding tables. Depending on the functional purpose, their appearance varies and size. But unites all structural solutions. One detail - the height is always done more than the folding part, otherwise the table simply will not work out. The finished table is decorated with various ways corresponding to its destination. For example, decorated with decoupage or paint in any color.

Apply folding tables in a variety of life spheres. They are used as the shelves for remote trade, they use on picnics, installed on dachas as a seasonal dining table in the open air, also often such furniture are bought in apartments, the area of \u200b\u200bwhich does not allow you to install a stationary dining table on a large number of of people.

In accordance with the scope of application, the tables differ in the type of material. For use outside the house, structures made of aluminum with a tabletop of plastic are optimally suitable. These materials are not subject to corrosion, but at the same time we will weigh a little, which makes it easier to transport. But in the house such furniture will not look very appropriate. It is better to stop your choice on a tabletop made of natural trees, plywood or laminated fiberboard, with a wooden frame.

Tables also differ in the form of the tabletop - a rectangle, a circle, oval or square. Most often there are table top tables in the form of a rectangle, as this form is most universal and convenient to use and storing the table. For the manufacture of legs of tables, wood, aluminum or steel are used. If the feet of the tables are located in parallel, then this design has a smaller rigidity, but it will not be very convenient to sit at the table. Crossed legs make the table as sustainable as possible.

The legs of the folding tables are attached stationary or taken removable. Sometimes they are equipped with carvings for height control, it is very convenient for street folding tables, as it makes it possible to adjust horizontal level Countertops. When planning to make a folding table with your own hands, the drawings must be studied carefully and choose the design not only by the size of the table top and design, but also according to the features of the frame, in particular, according to the intended arrangement of the legs.

If the kitchen table is needed, the ideal material for it is a tree or laminated fiberboard, and the frame design is parallel to each other legs. The table from such a material will last long in the house, provided that it will not be laid too often. These materials allow you to create particularly beautiful furniture, it is because it is recommended as a basis for home interior. But as a table for a picnic or cottage, a table of lacquered plywood is optimally suitable. It does not drink moisture and does not deteriorate when used in the open space. The legs in this case should be placed the cross to the cross so that the table is easy to develop and did not break from frequent use.

Picnic table do it yourself

Rest in the city will be even more pleasant and more comfortable, if you do not sit on crude land, but conveniently staying at a small folding table for a picnic. Also concerns and fishing and any trips outside the city. This furniture is made quite simple. First you need to view the drawings to better explore the design on which the table is folded. The photo of the design and the necessary elements are located below. Dimensions in the drawings, if desired, change to any others, which are necessary, taking into account all the proportions.

The design of the table is quite simple and does not require complex manipulations and a large number of fittings. The manufacturer's algorithm looks like this:

1. They cut all the necessary bars on the circular saw. Their size and quantity are indicated in the photo with drawings. If there is no circular saw, it is replaced by the usual or any other convenient tool.
2. Make a tabletop from any convenient material - Patent plywood or wood. The table top is covered with several layers of varnish, since it is this element of the table that takes on the main blow of moisture when it is on the street. In addition, this countertop is easier to wash away from different spots.
3. Return to harvested bars. All sleeps on them must be covered with the edge ribbon. Lobzik Round bars for legs and footholds. If there is a grinder from these elements, a straight angle is cut and then smoothed by a machine.
4. When all the details are ready to begin the process of their bonding among themselves. To begin with, combine the legs and supports together. Then the tabletop is applied for fasteners. Installation of parts is carried out using a tree screws with a diameter of no more than 35 mm.
5. All the parts of the table are numbered, disassemble, they grind their irregularities and are treated with varnish. Now the table is collected finally.

This design involves a one-piece countertop. It is very convenient in operation, as the smaller the moving parts in the table, the less likely that over time he will lose its stability. But during transformation, this table varies in size only by folding the legs, which makes it not very compact. For transportation in the car with a small trunk better suitable Construction with a tabletop divided into two parts. This table is done too simple enough:

1. Tabletop is manufactured, for this use two pieces of plywood equal size. Sizes 340x500 mm.
2. Make 4 legs from bars with a cross section of 40x20 mm. In each leg drilled two holes with a size of 6 mm, choose the heads of the bolt under the gluke. Landing for bolts is chosen in such a way that they are included with the outside of the table.
3. Make 4 crossbars with a length of 500 mm for the main frame. This part will be located on the tabletop and serve as the main ribbon of the rigidity of the table. Holes in the crossbars are drilled according to the same rules as for the legs.
4. Make 2 crossbars for legs, length 380 mm.
5. All items are collected, focusing on the drawing.

Another convenient and compact version of the picnic table - a suitcase table. In this case, the legs and the countertop are not just folded, and the table is going to a real suitcase with a handle that is convenient to transport even by public transport. For the manufacture of such a table it will be necessary:

• 2 plywood sheets with dimensions 50x60 cm;
• 4 bars 44 cm sizes;
• 2 vehicles measuring 60 cm;
• 4 bars 52 cm;
• self-tapping screw - about 30 pcs;
• nails - about 50 pcs;
• handle for a suitcase or door handle;
• 2 loops with a size of 60 mm;
• 2 suitcase latches;
• furniture screws for fastening legs.

Table assembly algorithm:

1. For a start, a frame is collected. We produce 2 frames of the same sizes - 50x60 cm, they are fastened with self-draws. The finished frame is similar to a small low box.
2. On the frame of self-drawing fasten the loops in such a way as to connect both drawers with each other.
3. 4 holes for the legs are noted at the same distance, they must be 1 mm more than the diameter of the purchased furniture screws. Next, there are places for holes on the legs and immediately dried.
4. Now the legs are screwed to the frame and the stability and symmetry of the entire structure is checked.
5. From the end of the frame, the handle and latches are screwed down, the table is ready. To disassemble the table of such a design, you need to unscrew the legs, fold them into the frame and close it as a suitcase.

The processing of the table of any of the designs described above is carried out equally - it is treated with a verse, varnish or paint. This will not only improve the appearance, but also will prolong the service life. The beauty of the product will also give a slightly different structure of the table top. The above was described by the table making algorithm with a worktop from a solid piece of wood or plywood, but if we make it from the riveted rates, then such a table will look much more interesting.

The folding mechanism in the table-suitcase is upgraded using stabilizers to which the legs are screwed. The whole design is connected to each other, the legs are placed so that they easily enter the inner edge of the frame. Now the design is collected without unscrewing individual elements.

Dining table folded with your own hands

Make easily not only a picnic table, but also a beautiful functional home furniture, such as a dining table folding. The manufacturing process does not constitute anything complicated. The most costly time and forces stage will be the manufacture of all parts, the table itself is going easily and simply. It is only necessary to have a drawing at hand.

1. A - countertop, parts size - 700x670x20 mm. It is necessary to make 2 pcs., Recommended material - hollow shields.
2. B - table lid, parts size - 700x200x20 mm. It is necessary to make 1 pc., Recommended material - carpentry plates.
3. B - feet of the table, size - 720x190x20 mm. It is necessary to make 2 pcs.
4. Mr. Tsarga, size - 638x190x20 mm. It is necessary to make 1 pc.
5. D - podstole, size - 628x190x20 mm. It is necessary to make 1 pc.
6. E - Bar frame horizontal, size - 500x40x25 mm. It is necessary to make 4 pcs.
7. W - Bar frame vertical, size - 500x40x25 mm. It is necessary to make 2 pcs.
8. W - moving leg, size - 720x40x25 mm. It is necessary to make 2 pcs.
9. And - piano loop, you need 4 pcs.

Table manufacturing algorithm:

1. For starters, all the sleeves on the details must be treated with the edge.
2. The assembly begins fastening the central part with a moving leg, vertical and horizontal location bars. In the diagram, these details are denoted by letters s, well and E. The mount is carried out with the help of deaf straight spikes.
3. Make a assembly of the countertops, for this it is fixed with a leg, kingu and a prestole. In the diagram, these details are indicated by letters in, G and D.
4. Round plug-in spikes are fixed to the ends of the legs cover (b).
5. The design of the movable leg and the frame is equipped with a rubber band or a metal button, and then the piano loops are attached to it.
6. The table assembly is completed, now it is necessary only to cover with a varnish or another to your choice.

How to choose a folding table

The main parameter when choosing a folding table is its estimated functional purpose. Tables are large and small, equipped with folding chairs or without them. If you plan to use a table for a large number of people or install it as stationary street furniture For the summer season at the cottage, it is better to stop your choice on the tables with a tabletop of aluminum and steel frame. Such a table will withstand a significant load and will place a large number of people. Often such designs are equipped with a case, which will be a convenient help for safe storage of the table.

If the table is planned to be used rarely and for a small company, then a model of medium-sized wood or aluminum is suitable. For street use It is best to stop your choice in the second version. In the design of the folding table, one of the most important factors is its small weight and sizes. Since the folding table is most often used for trips, he needs to be easy to fit in the car trunk.

Materially used for the manufacture of tables Material - wood, steel or aluminum. Each of them has pros and cons. Aluminum weighs a bit and is not subject to corrosion, but by itself very soft and short-lived. Steel is firm and reliable, but moisture is afraid. The tree requires care and protection against external influences, with its weight more than that of aluminum.

Last year, he made a bunch of compact collapsive chairs for a ride to nature.

But they noticed quickly that there is not enough table!
Long time was going to make the same principle but there was no time.
Prihvoral and time appeared. Here it is:

Exactly the same principle of manufacture as in chairs, with a frame of 28x40
Only as countertops instead of the boards applied furniture shields 30x60 cm, thought that from the boards will be bad because Glass will not put!
The countertop screwed down with self-draws so that they are not sticking up

The size was 60x60x60 cm
In the transport (assembled) view has dimensions of 60x86x8 cm

Who will need to give all sizes in fact
Shuttle curly on it will not sit but for kebabs and salads will go
Pains a little later in the same color as high chairs (white Belinka in 3 layers)

I will correct the health to go for tests!
Eh-xh to leave with Fardowa to Schashliking as in the old days ... so FIG! They ablained they did not want to go anywhere!

On completion - short video Principle of laying such furniture

Sizes of the folding table

Material specification:
1. Shield furniture t. 20 mm, 300x600 mm - 2 pcs.
2. Diagonal legs 28x40 / L \u003d 850 - 4 pcs.
3. Supports under the table top 28x40 / 600 mm - 4 pcs.
4. Screshing legs, length in fact, I got 435 and 485 mm - 1 pcs.
The cross section of these screeds is better to make 20x50 to spin more fastening screws - it will be more stable
5. Galvanized bolt with conical head M6x55 mm - 2 pcs.
6. Galvanized bolt with conical head M6 L \u003d 55 ... 70 mm - 4 pcs.
7. Galvanized nut M6 self-locking (with nylon sleeve) - 6 pcs.
8. Galvanized washer under the M6 \u200b\u200b(led under the nut) - 6 pcs.
9. Galvanized washer enlarged under M6 (Lined between boards) - 6 pcs.
10. Galvanized selflessness L \u003d 55 mm - 24 pcs.

The folding table may have a diverse design, and the choice is not limited to the material, the form of the table and the method of fastening the legs. In addition, there are variants of structures in the method of assembly.

The table can have large or compact dimensions, and all parameters are determined by its target purpose. However, the simpler according to the design of the folding table, the easier it is to make it with your own hands.

Overview options

Use the table of such a building, as a rule, indoors small metrah, in nature, the dacha, facilities under construction. But it is not all directions of application, since if desired, and in the event of such a need for a folding table, you can take with you to the road anywhere. This, perhaps, is the main advantage of the object of the furniture of this species.

Other advantages:

• compact dimensions, even if the table occupies a lot of space in the unfolded state, after assembly, you can fit this design in any secluded corner so that it does not interfere with the room moving;
• unusual design, since the design of furniture objects differ significantly from standard analogues;
• low weight, which makes it easier to transport;
• folding tables are usually quite easy to make with their own hands.

There are many performances of such designs. The main and most popular versions:

1. Excellent table top: Square, round, rectangular, oval.
2. By material: metal, wooden, combined.
3. The table can be varied both by the folding method. So, one of the options with cruciform legs, the dimensions of the design are changed in folded form, but the table itself does not understand. Another kind is completely collapsible to get ready product Used threaded fasteners.

There are other, more comfortable in the transportation of execution (table-suitcase), however, they are much more difficult to make them.

Drawing up the scheme

First you need to evaluate your own capabilities. In the absence of great experience, it is recommended to choose such a design:

We will do the easiest option of the folding table

Depending on the dimensions, this folding piece of furniture can serve as a dining table, it is also used in the campaign, fishing, etc.

For table tops, we use glued massifs of pine

So, you need to decide for what purposes such a table is being prepared. As a result, the scheme with arbitrary sizes will have the following form:

Scheme of legs and crossbars

These dimensions may be changed by own willing. But this should be done in accordance with the load level rendered on the design, and is maximally proportional.

Tool, material for work

Programmes are selected, based on what material will be brought by: wood, chipboard, aluminum. In domestic conditions, with your own hands it is easier to make a table of wood. And it is better if the countertop is from the chipboard.

Set of tools:

• electrolovik;
• building level;
• painting brushes;
• roulette;
• screwdriver;
• sandpaper or grinding.

The last tool is better to use only if there is experience. And the use of emery paper will significantly slow down the manufacturing process. As for the materials, it all depends on the dimensions of the structure.

For example, in accordance with the above sketch, the bars of 20x45 mm will be needed. If the folding table is planned to make more large-sized, you need to use 30x50 mm. The length of purchased bars can be different: 1.2 m; 5 m.

All the same, they will have to be cut into their own hands according to the sketch size. The board for the worktop is taken by the desired thickness. For a large design, an option is up to 40 mm thick.

Assembly

First cut off required amount Brucks with a small margin in size.

The diameters of the holes should be slightly larger than the sizes of fastening elements, for example, for self-sneakers / bolts M4 prepare holes with a diameter of 5 mm. All parts after cutting are processed by sandpaper / grinding. Next, you must open them with a protective composition, for example, a varnish for wood.

We connect the support legs together and drill a diverting under fasteners

First of all, you need to fix footholds with your own hands, there are 4 pieces, and they are perpendicular to "goats" (folding structures of legs with crossbars at the bottom). This is done using self-samples (3 pcs. On support).

They are attached to each other with the help of a bolt

The location of these elements is determined by the length of the crossbar that will connect the legs. And the distance between adjacent elements should be equal to the width of the bar, from which the "goats" are manufactured

First knock down the crossbar and 2 legs, you need to prepare two such structures, and one of them should be longer by 40 mm (value equal to the total width of two legs). It remains only to connect these structures, for this, the bolts of sufficient length are used, which are installed in the central through holes of the bars.

If you are incomprehensible to some operations - see photos. He gives an idea of \u200b\u200bthe overall design.

Tighten the bolts do not need to ensure the free rotation of the axis. "Goats" are attached to the tabletop by means of a bolted compound with pre-fixed by the footsteps. In order for the axial fastening of the legs does not break from regular folding, use locknuts on two sections of the cross-shaped connection.

To make it even more compact in the folded state, you can dismantle the bolted compound of the supports and the "goat". It is enough to remove two bolts. For this reason, the fasteners on these sites are not necessary too much.

The only thing that requires durable attachment is the footholds, since these elements provide a reliable set of legs. If you do a tabletop not from a tree, but from a lighter material, for example, a chipboard, the finished table will have a smaller weight, which will make it easier to transport.

Garden folding table organically looks in the shade of trees cottage plot, under a canopy or in a gazebo, while making rest comfortable and comfortable. A huge advantage of such a design is compactness in folded and special heat that comes from things made by their own hands. Making a folding table for giving will be able to anyone, especially since during the work, no specific tools will be required, and the material for the design can be bought on any construction market.

Folding table with your own hands. Photo

Folding table for picnic with your own hands. Step-by-step photos

Before embarking on the collar of the folding table, you should remember that half of success is to use qualitative materials . The bar and the board must have as little bit as possible, and the cracks and the bundle of wood are not allowed. In addition to sawn timber, you will need fastening, hinges, facilities for protecting sawn timber from the impact of the atmosphere.

Materials required for the manufacture of table

To make a folding table, you need to have at hand:

1. bar size 45 × 45 mm - 8 pcs. 730 mm long - for the manufacture of legs;
2. rake 45 × 20 mm: 2 x550 mm and 2 x 950 mm - for the assembly of the upper frame of the podstole, as well as 2 x 350 mm - for the folding part;
3. plywood rails 40 × 27 mm for supports - 3 x 450 mm;
4. 18 mm plywood size: - 985 × 585 - sheet for table top; - 2 sheets 985 × 530 for folding parts; - 1 sheet 885 × 481 mm for shelves;
5. rake 440 × 40 mm as cross;
6. 2 rails 450 × 40 mm for lateral reference elements;
7. 4 loops 60 × 34 mm for fastening the table covers;
8. 4 loops 80 × 41 mm for folding legs;
9. screws made of galvanized or stainless steel;
10. metal wanks for mounting shelves.

Slicing the blanks, try to be the corners of all parts and their ends straight angles. For this, a joiner's carbon is used, and in its absence it is possible to apply the angle of the factory cutting sheet material.

Folding table with your own hand drawings. Photo

Assembly instructions

Before proceeding to the assembly of the folding table with their own hands, it is necessary prepare Details from timber to installation. For this, each part of the frame is cut into the groove with a width of 20 mm and depth to the middle of the blank (22.5 mm). From the edge to the groove, the same distance is measured - 30-40 mm.

Step-by-step photo How to make a folding table for a picnic

After all the grooves are drunk, drill holes To connect parts to each other, as well as fastening legs.

To avoid the skeleton of the frame in the manufacture of the folding table with their own hands, on each leg make cross-shaped propulsIn which when installing the corners of the frame will enter. In more detail, this process can be considered on the presented drawings.

Properly prepared parts are the key to high-quality assembly, so it is advisable to use quality equipment - Good circular saw, drill, set of chisels and other carpentry tools.

Collect the top robe podstolya (everyday name of the frame table top). To do this, the rails are collected in the groove and recorded with furniture config terms (screws under the hex key);

At the assembled frame set support legsBy combining the heated parts with the rakes of the frame.

At the corners of the plywood shelves do cutouts under support. To fix the plate at a distance of 220 mm from the edge of the legs set metal shkants.

Collect nominating support elements. For this, the remaining bars are pairly connected to the rails installed in the grooves, fixing the connectivity of the confirmation.

Passing and trusting the tabletop and other details, proceed to staining the steps, rails and countertops.

Mount slayer shelf. Side jumpers are attached to the tabletop frame. Support rails attach to the shelf, for which the holes are drilled in it. Remember that this work requires special care, since even small displacements will be able to affect the geometry of the table.

A jumper is mounted to the table frame, after which three additional struts are fixed.

Retractable legs On the loop join the external struts.

Main and folding parts countertops fasten to loops.

Table cover is installed on frame, after which the middle part is fixed on the frame by self-draws.

The table assembled according to our instructions will have sufficient strength and reliability. The main thing is to perform the work of stages, in the presented sequence. Processing and staining must be carried out before assembly. Otherwise, gently paint the individual parts will not work and the finished product will look insufficiently in good and impressive.

Table transformer with your own hands. Instruction

The sliding type table has a solid, stable design, and its assembly will be asset even a beginner. In the folded state, the dimensions of the countertops are equal to 1200 × 700 mm. After spreading the table lid, in the resulting opening, the special insert is installed, getting the length of the table top 1670 mm. This makes it possible to additionally place two adults at the table.

Tools and materials

Before going to the construction market, write down, which parts and materials will be needed for assembling the table with a sliding lid:

• laminated chipboard with a thickness of 25 mm;
• PVC strip for placing edges with a thickness of up to 2 mm;
• aluminum corners of 50 × 50 mm - 4 pcs. 500 mm;
• telescopic guides for retractable drawers with a length of 500 mm - 2 pcs.;
• furniture legs with a diameter of more than 60 mm - 4 pcs. 710 mm long;
• castle-latch for drawer - 6 pcs.;
• 10 mm threaded screws M4;
• self-tapping screws 16 × 3 mm and 20 × 4 mm.

For work it is necessary to prepare such equipment and tools:

• mill;
• electric jigsaw with a set of pylons on plywood and chipboard (small tooth);
• circular saw;
• electrode and drill set;
• screwdriver or screwdriver set;
• hair dryer or iron;
• cute knife;
• bubble level;
• clamps;
• measuring tools, pencil.

Before proceeding with the cutting material, make a drawing of the table in size or use the design you suggested. In this case, dimensions component parts Covers countertops are indicated on the presented drawings.

Table transformer. Blueprints

Finding Table Manufacturing Instructions

Stage 1. Make marking Sheet material, after which cut out from the head of the table top - insert with a size of 700 × 470 mm, as well as two half of the table covers with a size of 700 × 470 mm. You can avoid chipboard on the surface of the LDSP using an electrolovka with a special low-profile tooth sawmaker. Additionally, at the place of the render, you can stick a greasy tape, which will prevent the cladding layer.

Remember: If you plan to process the blanks with a milling mill, then be sure to take a passage to the processing of at least 2 mm.

In order to smoothly cut down the plate, it is fixed by clamps to the workbench and exhibit the edge level. The tool should be kept slowly, constantly controlling the quality of the cut.

Stage 2.. Torlet The mill will allow to get perfectly smooth side surfaces. This tool also work slowly and neatly.

Stage 3.. Oklayka The ends of the table top PVC edge. The processed part is attached to the clamp, cut off and applied to the side surface of the plate the edge. After that it warms it construction phenomenon or Iron and smoothed. After the material is frozen, the protruding edge edge is cut off with a wallpaper knife.

Stage 4.. Processing all sharp faces and corners of aluminum corners.

Production of a transformer table. Photo

Stage 5.. Each corner mark the middle and measured 25 mm from each edge.

Stage 6.. Each side of the furniture guides are applied to the corner and mark their attachments. In the outlined points, the corners are drilled. To prevent aluminum drill slide, the installation positions are keen. Corners and guides are connected by bolts.

Stage 7.. The resulting structures of the guides stay On a flat substrate as follows: The corners connected to the inner guides (thin) are inwarded, to each other, and the angle to which the outer parts of the guides are attached (still, thicker) - outward. After that, in mobile and fixed aluminum parts, 4 holes are drilled.

Stage 8.. Both halves countertops Put the front side on the workbench or other smooth surface. From above, at a distance of 80 mm from the side sides of the panels, retractable guides are installed (movable, thin part of the inside). At the same time, the junction between the halves of the table covers should fall on the middle of each guide.

Stage 9.. Stationary half telescopic guide Fasten to the left half of the table covers, and mobile - to the right part of it. For this, the screws of 20 × 4 mm are used.

Stage 10.. Next to the sliding system, latches and loops are mounted.

Sometimes there are situations when guests come to the house and the owners have nowhere to send everyone. In this situation, it is better to think about how to make a sliding table with your own hands to use it every day and in the case of a large feast.

It is worth noting that the manufacture of such a model is under the power even beginners of a joinery. You can easily surpass the design tables by adding some individuality into furniture. This option can be used for both the kitchen and the dining room, it is great for large and small rooms. A practical folding table can be one of the most useful things in your home.

Dining tables have pretty simple designs. Folding models are equipped with a special mechanism and additional countertops. In general, everything is simple enough, the main thing is to correctly draw up the drawings at the very initial stage of work.

1 2 3
4 5

The basic requirements for carpentry work is the quality of the material and strength of its consolidation. We all know, what loads should withstand the table and must comply with this standard. In addition, this furniture is very often subjected to transportation, and this is another signal that you need to take care of the strength of the structure.

Dimensions are set by who will use the sliding table. There are no practically no restrictions here, except that the countertops must hold firmly at the base.

Retractable parts are attached only for the very edge, so making them very long, you will not be won. With any, stronger load than their own weight, they will be fed, and in consequences will break at all. It is reasonable to approach this issue and consider some schemes that will prompt optimum length On your kitchen table.

What material to choose?

All stoles have a question of which material to choose for sliding table do it yourself? Here much depends on what you plan to make, as well as from your finance.

1 2 3 4

Remember that the tabletop more often than other places will be subject to moisture, food residues and other damaging substances. Therefore, one material should be chosen that the most resistant to all fluids and not only. The following types of wood are considered the best in this case:

• pine;
• nut.

Before you start creating a table top, the tree must be carefully drying. It is advisable to take advantage of a special moisture-repellent solution and cover the surface in several layers. Also, for additional protection, it is necessary to use varnish.

To assemble legs, you can use the same material as for the table top. Sliding table, made with their own hands will serve a longer service if it consists of the same material. Bruks should be at least four centimeters, as only such a thickness will allow you to withstand a heavy woodworking and subsequent load on the product.

Tools for work

It is worth understanding that the assembly of such furniture can take you quite a sufficient amount of time. In order to more widely understand the process, look at the video about how to do it in stages with detailed explanations. You can learn something important for yourself from there and supplement your table model with something new.

In order for all the work to be correct, you should prepare the entire necessary tool in advance. To date, this is not a big problem, almost everyone has a similar set in the house:

• screwdriver;
• drill;
• electrolovik;
• sander;
• construction level and roulette;
• building glue.

In addition, you should buy the mechanisms of sliding kitchen tables in advance, which will be easily needed.

Order assembly

Start collecting parts follows from the bottom of the table, that is, from the legs. Be sure to make labels in the joints, accurately measuring all distances. Before the direct assembly, all the details are desirable to cover with varnish, so the tree longer will retain its original appearance.

The upper part of the table and the mechanisms are fixed on the legs. It turns out some termination of the product to which the countertops will be attached.

Remember that the correctly compiled scheme will help to collect the mechanism from the first time, as experienced joiners do.

Countertops are attached to the construction corners to the finished termination. It is necessary to do it on small screws, so as not to damage its appearance. Be sure to thoroughly tighten. For additional fastening of the still parts of the table, use construction glue.

To date, many people are trying to try themselves in a joinery. And it's right, because the created thing created by the thing much more pleases rather than buying in the store. Especially if you are a creative person, then applying fantasy, you can easily add your room with bright details.

The table with your own hands may well be made even a homemade master who does not have any accumulated experience in the joinery craft. Of course, it will be possible if the design of the table will be sufficiently simple and understandable.

For example, find a suitable ready-made table model for a kitchen with overly small dimensions is not always obtained. Purchase to order furniture from the wood array - sufficiently placed. Therefore, it is sometimes necessary to take care of the tools and design your own "work" yourself, pushing out the specific sizes of the place where the table is planned.

In addition, a desire often arises to show their creative abilities in the conditions of giving, especially since there is always a desire to beautifully equip the veranda or a gazebo of a country site. If there are suitable materials and tools at hand, then you can or sit for drawing up the drawing of the future table, or take advantage of the finished project, and then proceed to work.

To understand which of the types of tables under the power to build with your own hands, it is desirable to consider several options for this subject of furniture.

Before starting work, you must prepare the appropriate tools that will be required for the manufacture of any wooden table. The amount of material for each model will be different.

You can use ordinary, traditional hand toolswhich worked carpenters. This list usually includes:

• The plans to be aligned with wood and drive items to the desired size.
• Chisels for sampling various holes and grooves, removal of small protrusions.
• Saws of different sizes and modifications that cut thick boards or make minor drums.
• Pencil, roulette, corner and ruler.
• Screwdriver Set.
• Clamps for temporary fixation of glued parts.
• Sanding paper for grinding.

Many of the tools can be replaced by more modern and convenient devices:

• Electric jigscription will perform all the work for which they used to be used, the various saws mentioned above.

• The grinding machine will help to make the surfaces even and pulses them to the brilliance, will save from the very tedious handling procedure with emery paper.

• Milling machine with a set of cutters. This device will help rounding sharp corners, drill curly grooves under furniture loops, and if you need a certain experience, you can decorate the table with a relief pattern with it.

• Significantly accelerates work, as it will have to spend on the twist of each self-proof for a few minutes. In addition, it is possible to install one of the cutters or conventional drills in it with certain operations, for example, in order to process the edge or make a perfectly smooth large or fine hole (groove).

• The building level will help make the product smooth and neat, as it will show all possible irregularities and skews.

So that the finished furniture does not work out "dashed", the assembly is controlled by the level

Easy in the manufacture of a table for the country area

Make a similar country table - forces to everyone

Necessary materials

For such a country having a size of a tabletop of 1680 × 850 mm, it will not be necessary for a very large amount of wooden blanks. It is necessary to prepare the following:

• Bar, section - 750 × 100 × 50 mm - 4 pcs. (Table legs).
• Board, size:

- 1680 × 100 × 25 mm - 4 pcs. (longitudinal framework elements);

- 850 × 100 × 25 mm - 2 pcs. (transverse framework parts);

- 1580 × 100 × 25 mm - 2 pcs. (facing boards for the side elements of the frame);

- 950 × 100 × 25 mm - 17 pcs. (Boards for the table top).

• Self-tapping screws, bolts and, possibly, metal corners.
• Carpentry glue.

Everything wooden elements Must be treated with the compositions and have a prepared smooth surface. If it is planned to "darken" wood, it is coated with a verse, and for the manifestation of a texture pattern - on top neatly passing grinding machine. Sanding paper with small grain will remove the blurred sublime parts of the wood pattern, and they will become lighter than recess.

Installation of garden table

When all parts for the frame will be prepared, you can go to the assembly.

Frame or "Box"

• The first step of the work-table framework details are four longitudinal boards of 1680 × 100 × 25 mm and two end 850 × 100 × 25 mm, laid out on the big table or on the floor. On the end boards there is a markup of the location of the internal and exterior boards. Using a ruler, relying on the drawing, the desired distances are measured and the pencil is marked. Be sure to accurately note the width of the longitudinal board at the junction with the end, especially if the connection is to pass in the insertion method.

The connection of the elements can be carried out in different ways:

Connection with the choice of a "quarter" and using metal corners

- using the steel corner - this is the easiest and reliable way;

- the method of the insert is a more complex way, since it requires exact dimensions not only in the width and length of the connecting elements, but also in the depth of the board;

Several types of connection on the principle of "Ship-Paz"

- "Paz-Schip" shown in the second figure a), b), c), d) and e) such a compound is also quite difficult for beginner masters who do not have experience;

- The connection of the wizards is shown on Fenther E) - this method also requires ideal accuracy when marking and drumming the holes in the parts connected.

• All compounds are usually carried out with glue. An exception is only fastening the details of the metal corner.
• The frame must have perfectly verified direct angles, so after connecting all the elements, you need to control the construction of the construction corner and measurement and comparing the length of the diagonals.
• If the parts are fixed with glue, they must be fixed in clamps and leave it to the complete burden, otherwise they will be connected unreliable.

• When the glue is driving, and the frame will acquire a certain rigidity, facing boards are fixed to external longitudinal sides of a size of 1580 × 100 × 25 mm. The place of their attachments also need to be placed, since in their edges there should be a distance for the installation of the legs. Facing boards are also placed on glue and fixed with self-drawing, the hats of which should be dried in wood by 1.5 ÷ 2.0 mm.

• The next step is the transverse case of the countertop boards 950 × 100 × 25 mm. The place of consolidation is also needed to first place, starting from the middle of the frame, as they must be installed at a distance of 5 mm from each other. Table tops over the frame should be 25 mm from all four sides.

• Further, each of the boards are fixed in four places to the longitudinal elements of the "box" of the table, and the extreme boards are also to the end parties. So that the hats of the screws were recessed, for them in the boards, the recesses with a diameter of 8 mm are drilled into a depth of 2 ÷ 3 mm, then, in the center of these recesses, the drill of a smaller diameter (usually - 3 mm) through holes are dried, in which the self-tapping screws will be screwed. In order to avoid cracking of boards during installation work, through holes must be drilled.

• After that, on the edges of the longitudinal boards, the legs of a bar with a cross section of 750 × 100 × 50 mm are fixed, they must accurately coincide with the width of the table top.

The next step - the legs are installed

• The legs can be fixed to the frame by self-drawing, but it is better to fix each of them with two bolts, placing them on the diagonal of the connection site. Through the bolts are drilled through holes, and the twisting of the nuts on them is made from the inside of the frame using the key.
• The final stage of manufacturing is seeding with screws of self-tapping screws with a mixture made of joinery or epoxy glue and sawdust. This homemade putty Fill the deepening over the hats and spill well. After grazeing the glue all the worktop, and especially the places closed by the "plugs" of the glue, you need to polish well.

• After that, the table can be covered with varnish or water-based paint. Waiting for drying the decorating or protective layer, the product can be installed in country gazebo, on the veranda or terrace in the recreation area.

If desired, the set to the table will be easy to make or bench.

Small folding table for kitchen

Such a small folding table is perfect for a small kitchen or a very small room.

• Its design is arranged in such a way that the countertop cannot work independently if the feet of the table will be condemned, so the table is quite safe for installation in the children's room.
• The presence of a bilateral spacious bedside table will allow you to store various trifles and small toys.
• The table is equipped with a tabletop of sufficient size so that the child, sitting behind him, could perform homework.
• In addition, there will be a place for a laptop on the worktop or the books necessary for studying books.
• If necessary, this small table can easily replace and ironing boardIf there is a soft tissue on its surface.

Given all the above, the table can be called multifunctional, despite the very compact dimensions.

Find out how, as well as familiarize yourself with multiple models with detailed instructions, in the special article of our portal.

Required materials and details for folding table

To assemble such a convenient piece of furniture, you need to prepare all the details from which it consists. The list of necessary blanks is shown in the table below, and how to manufacture them - will be described and shown below:

Scheme of the table with the populated numbers of assembly parts (clickable illustration - click to enlarge)

Details number in the drawing	the name of detail	Number, pcs.	Detail size, mm	Material of manufacture, thickness, mm
1	Folding part of the table top.	1	600 × 600.
2	Fixed table top of the couch.	1	600 × 475.	Multilayer Plywood 25mm Thick
3		2	530 × 30.
4		2	120 × 30.	Multilayer plywood 18 mm thick
5	Top face detail of the groove, limiting the movement of the leg.	1	122 × 30.	Multilayer plywood 18 mm thick
6	Element groove for the movement of the leg on the folding countertop.	2	530 × 20.	Multilayer plywood 18 mm thick
7	The element of the groove for the movement of the leg on the tabletop of the couch.	2	120 × 20.	Multilayer plywood 18 mm thick
8	Lower end detail of the groove, limiting the movement of the leg.	1	122 × 20.	Multilayer plywood 18 mm thick
9	Side walls of table stands.	2	720 × 520.	MDF 19 mm
10	Horizontal details of the stands forming the shelves.	3	520 × 312.	MDF 19 mm
11	Lower vertical part internal partition Cumbers.	1	418 × 312.	MDF 19 mm
12	The upper vertical part of the inner partition of the couch.	1	312 × 184.	MDF 19 mm
13	The average horizontal part of the couch.	1	310 × 250.	MDF 19 mm
14	Door of the couch.	1	477 × 346.	MDF 19 mm
15	Shelf of the couch.	1	310 × 250.	MDF 19 mm
16	Facade cabinet drawer.	1	346 × 209.	MDF 19 mm
17	Front drawer panel (located behind the facade).	1	418 × 312.	MDF 19 mm
18	Side panels drawer.	2	341 × 250.	MDF 19 mm
19	Rear drawer panel.	1	272 × 120.	MDF 19 mm
20	Bottom panel box.	1	341 × 272.	MDF 19 mm
	Handles for drawer and door doors.	2	Ø 30 mm	Wood
	Upper leg element.	1	80 × 80 × 18	Multilayer plywood 18 mm thick
	Mobile feet of the table.	1	Ø Top 55, bottom 30, height 702	Wood
	Furniture loops for connecting two parts of the table top.	2	Ø 50 mm	Metal
	Furniture loops for the door.	2	The size depends on the form.	Metal
	Bottom end panels covering the lumen under the tab.	2	20 × 300 × 5	Plywood 5 mm

The figures show the drawing of the table to which you can rely on the process of manufacturing and assembling elements into a single design.

The main sizes of the table (illustration clickable - click to enlarge)

Separate table nodes - drawer And the guide channel for moving legs (clickable illustration - click to enlarge)

For the manufacture of all the parts listed in the table, modern electrical tools will be required that can bring the workpiece to professional perfection.

Learn how to make with a photo and description in a special article of our portal.

Installation of folding table stands

Start the manufacture of the table stands with the most important and large part of its details - countertops. Since the folding table, this element will consist of two parts - stationary and "mobile", that is, that which can be thrown down if necessary. In the folded state, this table may well perform the role of a conventional compact standby.

Illustration	Brief description of the operation
	The first step of plywood with a thickness of 25 mm, using a jigsaw or circular saw, it is necessary to cut the blanks for the table top, the size of 600 × 600 and 600 × 475 mm.
	Next, the larger panel is marked - the semicircle is drawn up, since the front of the table should be rounded. In order to achieve proper form Semicircles, you can use a large building circula, or make it yourself - from the nail, pencil and rope.
	Then, according to the noted, the tabletop curly. This can be done using a jigsaw or circular saw by installing an appropriate zircle nozzle on it.
	Further, the milling machine is set to the cutter of the desired configuration, which will make the edges of the table top smooth, optionally - smooth or rounded.
	The milling part of the panel is treated with a milling part, leaving a smooth one side that will stick with the second part of the table top. The edges are then processed.
	The next step, the two treated parts of the table top are laid on a flat table at a distance of 5 mm from each other. Marking is made to install furniture loops. They must be placed at a distance of 100-120 mm from the edge of the table top. Furniture loops can have a different form, so they should be put on the marked place and circle with a simple pencil. Then, with the help of a milling mill in the plywood, special curly grooves are arranged, the depth of which should be equal to the thickness of the furniture loops. In the finished holes of the loops are fixed with the help of self-tapping screws.
	After connecting the hinges of two parts of the table, in the middle of the panels, there is a markup from the bottom side to secure parts that form a closed channel for the movement of the moving feet of the table. Guides must be fixed at a distance of 30 mm from the joint of two parts of the table. For the manufacture of parts, plywood is 18 mm thick. Then, cut out of it and processed by a mill of 10 elements: 530 × 30 mm in size - 2 pcs., 530 × 20 mm - 2pcs, 120 × 30 mm - 2 pcs., 120 × 30 × 20 mm - 2pc., 122 × 20 mm -1 pcs. It is important to remember that long rails must have from one edge, and short elements on both sides of the sections of 45˚ so that when docking, they formed a straight angle. In addition, the upper long and short parts fixed on top of the lower rails of the guides are cut from the ends, also at an angle of 45˚. These sections are necessary to ensure that their corners do not interfere with the foot of the legs by the resulting channel. Then, to the discharged section of the rounded, and then to the rectangular part of the tabletop are glued with carbon glue parts. First, they are fixed on the glue, and then screwed up the longest rails having a size of 530 × 20 mm, then overlaps the channel part 122 × 20 mm. On top of long and short fixed rivers are pasted by second, having the same length, but large widths are also additionally screwed by self-draws. Thus, a smooth channel forms between the tabletop and the upper rail, along which the leg will move. It is very important to calculate the location of spouts of screws in so that the upper does not come across those that fix the lower rails. Similarly, four parts and on the rectangular part of the table top are fixed. All items should be processed before smoothness and perfectly fixed with each other, otherwise the leg when moving will be stumbled on obstacles and jam.
	The leg is usually made on the lathe. If it is not, then it can be ordered to order it at the master or buy in the finished form. As a last resort, you can make it square, processing the timing of the desired height before smoothness. Then, on the upper end part of the leg with the help of a duct and glue is fixed exactly in the center, the guide square plate of plywood, having dimensions of 80 × 80 × 18 mm.
	Next, after drying the glue, the leg can be installed in the channel intended for it and test for its free movement, without jamming. If necessary, you can carry out minor fit and refinement.
	The finished countertop is painted, or is covered with a water-based varnish - if the goal is set to preserve the factory drawing of plywood. After that, the finished countertop is laying aside and go to the manufacture of the couch.
	Elements of the cabinets do not have complex configurations, so it is enough to make them enough on the MDF panel or a thick phaneer to accurately move the dimensions of the parts specified in the table, and gently cut them out them with a jigsaw or saws. After the items are made, their end parts must be processed before smoothness by the milling mill, otherwise they will look inactively.
	If you plan to leave the visible end parts of the details of the chandeliers with a special laminated edge ribbon, then this process is carried out using a conventional iron. The tape on the inner side has a layer of glue, which is heated under the influence of heat and ensures reliable fixation of the edge on the surface of the end parts of the MDF panels.
	The next step in the door panel of the cabinets you need to make curly grooves in which furniture loops will be fixed and fixed. The holes are made in the same way as in the tabletop with a millingrer, but in this case the mill can be installed in the screwdriver, since the MDF has a smaller density than glued puff And it is easier to handle without chipping material. The loop should be located at a distance of 100 mm from the edges of the door - before the start of drilling you need to spend thorough markup. A similar procedure is carried out with the wall of the couch to which the door will be fixed. Then the door of the door is joined among themselves, to check the correctness of the installation and for the holes for the screws for the screws.
	In addition to loops, you can immediately fasten the prepared handle. To do this, retreating the edge of the panel 50 mm and finding a convenient position in height, the point is noted through which the through hole is drilled to fix the handle.
	All made parts of the cabinet are painted paint selected color with roller and brush. Paint will not only make the product aesthetically attractive, but also protects the material from negative influence Specific kitchen wet environment.
	Next, you can go to the assembly of the bedside tables. Professionals spend this process using special tools, but they can be completely replaced by appliant devices. For example, you can assemble on a flat table, and for the convenience of installing the cabinets, it is additionally installed on smooth bars. Mutual fastening of parts can be carried out with the help of wooden drums, metal furniture corners or screws - the last option is the easiest, but also the most unreliable. In addition, hats of self-assembly after assembly will have to mask various compositions. The assembly process occurs as follows: - The bottom panel is laid on the stand. - It is set to it in terms of the level and with the help of a construction corner one of the side panels and its location is marked with a pencil. - And the same is planned on the horizontal and vertical panel the location of the fastening parts. - exactly the same procedure is carried out with the second side and separation middle wall. - Then, on the marked points of the bottom and end sides of the side panels, holes are drilled to install the waders. - After that, before gluing the parts, the locations are defined on the side walls to install the shelves. Then, in the marked places mounted brackets-shelters for which holes are also drilled. - Next, in the holes, drilled in the bottom, are mounted glued by glue, the side walls are put on the upper, protruding part. - the non-removable jumper shelves are mounted in the same way, simultaneously with the side walls.
	Before you continue to work, you need to make sure that the glue in collected design Good miss. In order for the cabinet to stood tougher, it is placed on the side and for the breakdown squeezed by clamps.
	While driving glue, you can take a drawer assembly. Since it will be completely assembled from MDF, the installation of the box can also be carried out with the help of a wanking. The lateral sides are assigned to the bottom part of the box, and the line has a pencil, and then marked seats where the sewage will be installed. Then, the sidewalls are removed, and on the marked places, the holes are drilled in their end to install fasteners. The same is done on the bottom panel. Further, the wrenches are missing with glue and gently inserted into the holes, connecting the sidewalls with the bottom.
	Bathrooms are twisted with the help of self-tapping screws, the hats of which are recommended to be dried into wood, and the holes should be sealing from epoxy glue and sawdust. Another fastening option can become furniture corners, which are from the inside are screwed to the sidewalls by self-draws. Each of the sides will take two corners.
	Collecting the box, it is necessary to control the evenness of its corners with a construction corner and a change in diagonals, otherwise there may be a skew.
	If you plan to install metal roller guides for lightweight drawer, then to start on the sidewalls of the boxes and on interior walls The stands are determined by the place of their attachment. To do this, with the help of a pencil and ruler, the line is drawn, on which the guides will be enshrined.
	Next, the front panel is installed to the front of the box. It is screwed from the inside of the drawer, through pre-marked and drilled holes. Recommended In addition to the screws for fastening the panel, use the glue: it is applied to the front panel, and then the facade is pressed to it, and they are tightened with four-five screws. After drying the glue in the center facade panel A hole is drilled through which the handle is screwed.
	Finally, the long-awaited moment comes - the connection of the stands and countertops. The stationary part of the countertop is recommended to first be glued to the surface of the couch, and then fasten it with self-strokes, which are screwed from the inside of the lower cabinets. But first, the countertop must be right. A part of the channel located on the stationaryly installed tabletop panel must be restarted into the side of the couch - it will serve as a stopper for the movement of the legs towards the table. The countertop should go beyond the edges of the cutter on the side of the drawer by 50 mm, open shelves by 30 mm, and from the side of the leg - 120 mm.
	Securing the tabletop, go to the final installation and screwing on the dormitory of the bedside tables. Then the retractable box is inserted, and the shelves are installed on the shelves.
	In the closed state, the compact table, so it does not take up much space and looks quite aesthetic. If you wish to decorate it, you can choose other colors that will be better harmony with the interior of a particular room.
	In the open state, the table will also not take much space and perfectly fit into one of the corners of the room. Thanks to its "easy" design, it does not waste the interior, and the shape of the tabletop makes it safe for children. Therefore, this option can be considered ideal for small apartments with small kitchens and rooms.

If there is a need to save money, or simply there is a big desire to show yourself in joiner's work, then you should not postpone self-making. Moreover, the assembly will become not only interesting and useful, but also very pleasant, especially at the moment when the work will be successfully completed.

If you are a dacket, the owner of a private house, or just love to relax in nature, should know that the tables and tables on the street can be a real problem. All wines lack of mobility and familiar furniture, which can not be quietly taken with me on a picnic. An excellent option can be a folding table, which can be collected with your own hands.

If you move a little from the topic of recreation on fresh airYou can also remember about small apartments, in the kitchen of which is sometimes very difficult to place a large table for the whole family. This task can also be solved with the help of folding furniture. After all, now practicality more and more captives the hearts of ordinary residents. About the difficulties of the device, the parameters of the selection of materials and the creation process, we will talk.

Varieties

In this regard, more and more depends on the physical sizes of the tables and the field of their application. Anyway, the movable part should turn out at least a little bit, but shorter than the height of the entire table. Otherwise, your design simply will not be able to work out. There are many ideas for folding tables that can be supplemented with your own interfering or exterior finishes.

It is no secret that the most popular places for the use of tables of this type are catering places, in particular, outdoor sections, trade, picnics, should not be discounted and the option with the placement of such an item in your apartment. As for the latter option, you can pay most of the attention. exterior decoration Table.

The main differences in folding tables focus on table tops. They can be of various and unusual forms, although it is limited to simple geometric shapes.

If you doubt their variations, you can look at the Internet or magazines in the photo of the folding tables of various forms. It also depends on the taste of the owner and appointment of the table. The most practical are rectangular countertops, which are most often found in folding tables.

Design of legs

Legs, almost always, made of steel, aluminum or wood. This does not concern the situation when the whole table is made of plastic, in this case the legs are also made from this material. It must be considered, thinking about how to make a folding table with your own hands, because metal and plastic are poorly processed without the necessary devices. Plastic can work at all, only with the finished form of the design. In this regard, the tree is excellent for home options.

If you buy a table, you should pay attention to the legs that can be several species. Here division on materials goes to the background. First you need to look at their position.

If they are located in parallel to each other, then at such a table will be much easier and more convenient to sit. But the cross design of their positioning has the above level of stability.

In addition, in some cases, the legs can be adjusted, which is well affected by the stability of the table. This is especially useful in nature and simply with uneven floors.

If you chase for aesthetic pleasure, pay attention to the tables that have a parallel design of legs made of metal or wood, and a wooden table top, which can be simply grinding, and can be covered with varnish. This equipment looks particularly attractive both at home and on the street.

But it does not concern travel with picnics. In this case, the best tables with a lightweight design are best. It is usually aluminum for the bottom, and a light substitute for the tree for a table top, which is not a sin and paint, or to cover some applique, and put the lacquer, then the matter of taste is already.

We make a table on your own

Step-by-step instructions for a folding table can be found on the Internet along with the drawings. If you love your own self-invented solutions, it will be better to make a simple design table. This option can be done from the tree, while it will be sufficiently light and practical. Excellent solution for relaxing in nature or just in the garden of your yard.

The table top is better taken from the chipboard. This will facilitate the design, but at the same time, by treating it with varnish, you will not notice a special difference. There will be only twelve parts, and this number may change depending on your preferences. We are talking On the paired legs, which will be connected by a cross, whowing three pieces, two parallel planks on both sides for a moving mechanism, well, and directly countertop.

This design is easy to find on the Internet or thematic journal, while the general scheme will not change. In addition, the drawings of the folding table can be made himself.

All items need to be cut, and it will be more convenient to do with a circular saw. Further you will need: drill, screwdriver, self-tapping screws, bolts and sandpaper. With such a minimum set tool, you can easily cope with the task.

Moving parts are better to connect bolts that will not perform more than twenty millimeters. First you need to connect the supports to which the pripers are joined. Further turn table tops, on which you first need to place the fastening locations, then fasten the main design.

Next are the auxiliary components of the table. As you can see, there is nothing complicated. Assembling the table, in fact, the stage, which in ease of inferior only to the coating of varnish and the choice of design. The most difficult thing in all of this is to pinpoint parts and pick up for them the size before it.

Photos of folding tables do it yourself