How to install mosquito nets. How to install a mosquito net on a plastic window. How to assemble the design of component parts

The design of the mosquito net usually includes:

• frame profile;
• exposted profile;
• special connecting corners;
• fastening cord;
• corner profile;
• 4 plastic or metal holders (z-fasteners).

After mounting the mosquito net to the balcony door, the window in the room or on the balcony, you can completely forget about the rapid insects. This will help you not to use fumigators and other health-hazardous chemicals to combat insects. In addition, the device protects against dirt, dust, penetration into the house of allergens - plant particles, poplar fluff. It also guarantees pet safety with an open window.

Among the main advantages of such a design:

1. Easily use. How to remove a mosquito net from the window? - You will not have such a question, since the grids are easily installed and just removed if necessary - for washing, for example.
2. Wash the grid can be ordinary soap and sponge.
3. Aesthetics and attractive appearance - the installed grid will not spoil even the premises design.
4. The grid provides the smallest holes that are able to protect not only from insects, but also from rain drops. In this case, the material does not light up the overview from the window, does not interfere with the access of fresh air.
5. The design is distinguished by strength, since it includes metal (aluminum) framework elements and fiberglass.
6. The material is incredibly resistant to stretching, breaking, bending tension, and besides, does not fade into the sun.
7. The grid due to a small thickness is distinguished by compactness, which means it will be able to be stored anywhere.

Types of mosquito nets

I solve how to install a mosquito net on plastic windows, it is worth determining which type of design you will be used. The main varieties here are considered:

1. Frame It is considered the simplest and accessible in terms of cost. It can be removable and sliding. This type is ideal in the case when there is no need to constantly open the grid. In case the grid is made large, an additional reinforcing plank is installed in the middle.

   

2. One of the varieties of the frame grid is the plunger - it is not attached to special corners, and it is mounted immediately into the window opening.

   

3. Construction with velcro fastening Or scotch is also elementary. It is mounted on the inner side of the window sash and is easily removed if necessary.

   

4. Milking mosquito net on the balcony door can be made by type of standard door. It is attached to the loop and opens inside or out - just like the ordinary door. In the closed position, the grid hold special magnets, and a handle is provided for a convenient opening.

   

5. Rolled It is considered one of the newest inventions. It includes a guide profile, a grid in a roll and a special transverse bar with handles. The principle of using the product resembles shovers - in the open state, the mesh hides in the box above the door. This is the perfect solution for large window openings and glazed balconies.
6. Plisse It looks like a rolled construction, but moves horizontally, gathering at it in the harmonica. Such a grid is able to decorate the interior with its original appearance. Designers often decorate Plistes with drawings and other decorative elements, experiment with color scheme.

More information about various types of mosquitoes on the windows you will find in our article. You will also learn about the correct care for such structures.

Pro features of grids for balcony doors We told on the manufacture of a grid on the door with their own hands.

And about Tom, read here. In the warm season, this thing can be very useful, especially if your windows are on the sunny side.

Features of the mosquito net

Fastening the mosquito net on plastic windows or door can perform 4 base fasteners:

1. Plunger mount is considered the most expensive, but also the most reliable resistant to the effects of wind. The plunger is a special metal part with adjustment in length. It uses springs. The grid with such an attachment is easily removed and put on. By the way, the plunger is suitable for windows of any type.
2. The most unreliable fastening is considered the "checkbox" - fastening with the help of small plastic hooks. However, it can break with a strong impact of the wind.
3. Metal corners (Z-shaped fasteners) also make fastening reliable. However, such corners should be tightly fitted to the frame, and also additionally secured on it from the inside of the room.
4. Plastic corners are considered a popular type of fastening. They are located on the outside, without changing the design of windows. The grid is easily removed if necessary. In addition, this design does not interfere with the normal closure of the window.

How to install a mesh on the balcony door

Starting work on the installation of a mosquito net to the balcony door follows from the correct measurements - with an open door from the outside and necessarily close. After that, the method of fastening the structure is determined - it depends on the design features of the door and the placement of the grid.

Then you prepare the necessary tools and components - these are self-tapping screws, screwdriver, loops and pressure mechanism, magnets. Before mounting the mosquito net, the locations of the hinge attachment are scheduled, after which the loops are fixed to the door profile by self-draws. After the loop inserted into the mosquito net, the clamping mechanism is installed. At the final stage, clamping magnets are installed, which are also fixed with self-draws.

Mailing mosquito net on the window

Installing a mosquito net with your own hands on plastic windows begins with a construction assembly.

Tip: Before starting the installation and assembly of the grid with your own hands, you need to perform the correct measurements.

As a rule, the size of the anti-mosquito structure practically corresponds to the dimensions of the window sash. This must be checked - the window sash opens and measured over the lighting impeller, after which 20-30 mm is added to height and width.

Plastic frame profile is cut into a clear accordance with the opening window. Additional crossbar can also be mounted here - it is designed to increase the stiffness of the structure, which is necessary with a large altitude ratio to width.

At the top and bottom of the frame profile is enhanced by an adhesive - as a rule, made of aluminum. This guarantees the strength of the entire product.

After the profile is ready for the assembly, it is connected to the corners. These corners are made of particularly durable PVC (a thickness of 1-2 mm more than the profile) - therefore, the design acquires resistance to deformation.

The grid is tensioned on the fixing cord, and then this cord from the inside is mounted into the frame profile, as a result of which the web is reliably stretched and fully fixed.

After the metal elements of the corner profile are mounted on the frame, which are needed to secure the structure in the window.

Lastly, 2-hand-holder handles are joined to the mosquito grid - thereby ensuring the convenience of mounting. Then the fully assembled mosquito net is installed on the window.

If you are going to install an anti-moskit mesh on the window, and you will have already in my assembled form, then keep in mind that the width of the finished product should exceed the size of the window opening by 2 cm, and the height is 3 cm. Together with the grid supply and special Fasteners in the amount of 4 pcs. (Two pairs). In each pair - the upper and lower element, and the upper wider than the lower.

These fasteners are located on the frame and fasten - the main thing is not to confuse the sequence. So, first join the lower elements - so that the edge of the installed mesh moves 1.5 cm below the window opening. And in order to determine the place of attachment of the upper element, 1 cm is added to the mesh height and measure this distance from the attachment from below. The grid is inserted simply in the groove, attracting the frame and dropping down.

As a result of simple manipulations, you will get an effective barrier for insects and securely protect your home from bloodsowing, flies, OS and Moth. In addition, the grid cells allow you to capture even small particles of dust and large garbage - and therefore, even the air in your room will become cleaner.

Installing a mosquito net on a plastic video window

And here you can watch the video, which demonstrates the installation of a mosquito net on the PVC window on plastic mounts.

Hide

Summer brings not only positive emotions and rest, because you should not forget about the annoying flies and dangerous mosquitoes, which are still lying to fly into the opened window. Mosquito net is inexpensive, but if you count that there are several windows in the house, then it turns out a very decent amount that, if desired, can be saved. Mosquito net is done with their own hands quickly and costs cheaply.

What is better - purchased mesh or made yourself?

Buy the window mesh will cost you about 1500-2000 rubles, so for the sake of savings, it can be done independently. Many wonder - how to make a mosquito net on the window? It is not difficult, especially since everything you need can be bought in a shopping store. If you are interested in the question of what mosquito nets make, the answer is simple - the material is durable fiberglass with the addition of atmospheric PVC. The higher the quality of the material - the higher the protection against insects.

Before making a mosquito net with your own hands, do careful measurements, do not forget about the allowances. If you are going to fix the grid with a velcro or glue, choose what can be easily removed and not damage the window.

Several simple ways to make a mosquito mosquito with their own hands

There are two types of mosquito nets that can be made independently:

1. Fastened ribbon fixed - a simple and cheap way to make a mosquito net with your own hands.
2. Frame.
3. Rolled.

One of the most simple ways of making a mosquito net with your own hands is using a special material and a sticky tape.

Take high-quality velcro, it will depend on the quality of the mounting of the protective grid on the window opening. Also need special material with small cells. The smaller the cells, the better. Such material can be purchased in fabric stores, and you can use old products, such as unnecessary tulle. It is best to purchase a special mosquito mosquito - it reliably protects from insects and stands up withstanding atmospheric influences.

Mosquito net fixed with sticky ribbon

After all measurements are made, take the material and reveal it, do not forget to leave small allowances. Velcro divide into two equal parts. Apply glue for one piece and gently stick to the window to the window. After the glue gets free, attach a mosquito net to sticky tape. Similar grids can be done for the car. Made quickly and easily, with minimal cost. Instead of sticking tape, you can use special magnets, it will significantly reduce the installation time of the grid and simplifies the process.

Frame window mesh

A more costly and complex method of making a mosquito net is a method with a fastening on a frame. To do this, you will need metal corners, plastic cable and exhaust rivets.

The first thing you need to do is to measure the window from the outside, because it will be the anti-moskit grid that will be attached. On the cable, cut the desired length, sticking to an angle of 45 degrees. Scroll sections and connect with metal corners. Now make in the corners of the holes in which rivets will be located. They should be outside, not inside the cord. Now it remains to consolidate the mosquito net itself on the frame. Do not pull a strongly anti-mosquito net, as in this way you can deform or break the canvas.

Frame window mesh

You can make sliding mosquito nets with your own hands, they will fit well and protect the balcony opening or the entrance door. Mosquito net to the balcony will help you prevent the penetration of dangerous insects into the room, protects reliably even from street dust. The manufacturing technology is the same, the only difference is that the material in the middle is cut, the edges are processed. For convenience, you can fix on the edges of the mesh magnets or rivets, so you will provide additional protection.

Rolled mosquito net.

Window rolled mesh operates on the principle of rollers. It reliably protects from insects, and it is convenient to use it and simply. If you are interested in how to collect a rolled mosquito net with your own hands, then there is nothing complicated here. One should only be patient and appropriate materials.

With your own hands you can make a mosquito net for the window of any sizes. For the manufacture of rolled protective grid, you will need only a special box with a shaft and material. For mounting the mesh to the window, use special magnetic latches. You can apply fastening screws with screws or in the end of the guide in the opening to the slope. Use a roll grid more convenient than usual, and it is much easier to care for.

Rolled mosquito net.

Rolled mosquito net on the window is a wonderful protection against annoying insects. Allergy is especially appreciated - because it will protect the room not only from mosquitoes, but also from pollen plants and a poplar fluff. Material for such a grid is best to choose fine-grained, it will increase the level of protection.

Make a mosquito net with your own hands will not be much difficulty. If you need a mosquito net to a balcony or a window, you can make it quickly and without excess costs. Pay this process for several hours and enjoy a relaxing life without annoying insects! Mosquito net made by your own hands is quite inexpensive. After the summer, it can be removed from the window and carefully pack, and next year to hang on the window.

The homemade and cheapest version of the mosquito net without the use of the frame. This option is a mesh mount directly to the plastic window profile.

With the onset of long-awaited warm days, mosquitoes and moshcar come to life. Hide from them is very difficult. They penetrate the slightest slit, seek to get to a person as soon as possible. Only mosquito can stop them. She will be an obstacle for a poplar fluff, dust, etc. We will figure it out how to install on the plastic window itself.

Selection and installation of mosquito net

The best means to protect the house from the corporate guests is a mosquito. It completely covers the frame, preventing insect penetration inside.

Types of mosquito nets

• Frame. This is assembled from the metalplastic frame to which the mesh canvas is stretched. The finished design is attached from the outside of the window to plungers or Z-shaped brackets. This is an economical and quite convenient option.
• Rolled. Protection is made as analog, only instead of the fabric put a mesh of plastic. Roll is attached to the top of the frame. If necessary, the edge is lowered and fixed. Conveniently in operation, the price is above analogues.
• Swing. It looks like a framework, but the frame is carried out reinforced. One of his side is put on the loop, after which the frame can swing and closed, snaps into a magnet. The design is often chosen for doors on.
• Sliding. Component element of sliding systems. This is moving along the guide frame on which the mesh cloth is fixed. Its dimensions correspond to the sash. When one of them opens, the canvas moves and closes it.

Despite such a variety of mosquito elements, the frameworks most often choose.

Remove measurements

1. Fully open the sash.
2. We measure the width of the opening from one seal to another.
3. Similarly measure the height of the opening.

In order not to be mistaken with dimensions, be sure to measure in several places. There may be small discrepancies. The obtained values \u200b\u200bare recorded with an accuracy of millimeters.

Select fastening method

Important moment: selection mount. On the framework they put plungers they are rods or brackets. The last option is occurring much more often. In this case, the mosquito is placed on the outside of the window. It is inserted into the brackets, in shape resembling the letter Z. Significant drawback - the product can be easily removed from the street. Therefore, such fasteners put above the first second floor. Mesh on the plungers are installed on the lower. They are also attached from the outside, but the rods that fix the product are located on the side of the room. Thus, it is impossible to remove protection outside.

The complexity lies in the fact that the frame must repetitively repeat the lighting opening. It is almost impossible to do it, there are always small gaps. They can take advantage of insects. Therefore, a special brush is attached around the perimeter of the frame.

Made on the specified sizes is issued to the customer along with the attachments that it will install independently. We will analyze the two possible options.

Sequence of work for a bracket in the form of the letter Z

The kit comes four brackets. Two of them with a side of a shelf 25 mm, two with a side of 40 mm. Those that are more put on top. To work, you will need a drill, a 2 mm drill, a screwdriver or just a screwdriver, two screws with a screw for each bracket.

1. Open the sash. Outside on the bottom of the plastic frame, we deposit 30 mm down, carry out a line. For it we will install brackets.
2. From it, we put the height of the mosquito, add 18 mm, carry out a line. If it is possible to work outside, the easiest way to attach the item to the outlined bottom line, mark the upper edge. Add allowance, spend the second line.
3. We plan plots where we will mount brackets. From the edge of the light opening, we retreat 10 cm on the left and right. Put mark.
4. We apply fasteners to the planned point so that the edge of the shelf is on the line. We note where there should be holes. Similarly, we do with each bracket.
5. Drills holes. We put brackets, fasten them with self-draws.

It remains to put an anti-mosquito cloth. He is taken for the handles, slightly unfold, remove for the sash. Then get to the upper brackets, align. Lifted, insert into the lower mounts, they lower slightly.

Sequence of work for corners

The installation of a mosquito net on plastic is also made on corners. Like brackets, they are attached on the outside of the window frame. From above install larger fasteners, lower below. Elements are fixed with self-draws. The markup process and installation is very similar to the above. There is only one difference. Locks "hold" mosquito for corners, so accurate markup is required.

The bottom and the upper boundary are planned similarly. Then they define the middle of the opening. From it to the right and left toilet half the width of the mesh detail. The distance between the inner centers of the corners will be equal to the width of the mosquito plus 0.2 or 0.3 cm per free fixation. The installation of the frame in the angular fasteners is carried out in the same way as to the brackets.

We figured out how to mount a mosquito net on a plastic. This is not at all difficult, especially if you order a product according to your size in a company specializing in the production and installation of window systems. It will only be left to put protection that blocks the way with a corporate insect.

The beginning of the day was memorable: I called a friend and told about my trouble. In her private kindergarten, the baby climbed the windowsill to the opened window and spoiled the mosquito net in the open window, which was already installed before.

The husband of the Mother of the kindergarten offered his help, but not familiar with such work and does not know how to do it, how to correctly install the grid from mosquitoes and other insects.

To correctly establish a grid of insects, there are several ways and they will be discussed in this article.

Attention! We advise you to carefully treat this information and, if possible, to remember it fully - the summer will come and everything you read here can come in handy. In the event that you cannot remember everything - you can put this text in the bookmarks, so that it is always at your hand.

Starting with warm days when summer time comes, insects are trying to get into the house (some fly to light, others on heat, and the third, like mosquitoes, for the production of "food", i.e. suck blood for nutrition and continue) . Instincts lead them to where all this is, i.e. In human housing, in which you can only get through the entrance doors and open windows.

Therefore, people trying to protect against mosquitoes and their like, put mosquito nets on the windows and doors. In this case, you can freely air the room, remaining protected from unpleasant bites and the annoyance of night guests from insects

Grids from insects and mosquitoes for plastic windows

In cities and especially villages now it is already difficult not to meet the main window accessory - a grid from mosquitoes for new plastic windows and doors. Clouds of annoying summer midges, night buzzer mosquitoes and a poplar fluff remained far in the past thanks to this accessory.

Mosquito net is always convenient and familiar simply. That is why they became the main accessory and a mandatory addition to plastic windows. Installed in the spring, they can protect your peace to cold, when permanent ventilation does not bring pleasures, and the windows need to be transferred to the winter closing method. But while the grids are standing, I want the apartment as much as possible. And with the grid it becomes more difficult.

Swing grids allow you to ventilate the apartment and at home. You probably remember that before that the gift mosquito net manufacturing companies practically did not exist almost no alternative that would have passed the air and protected from insects.

True, there were such lovers of home inventions that did not want to put up with the insects long before the appearance of mosquito nets. They fastened the girlfriend, such as gauze on the frame frame and fucked to the doorway. Now in these inventions, it is unlikely that anyone will need - mosquito nets can be put on any door.

If you have a cat home, then you probably have already noticed its strange behavior when a mosquito net is installed. Sitting more comfortably on the windowsill, he begins to jump on the grid, trying to grab the flying past, then by arming a fluffy back and languidly sipping, begins to clean his claws about it. No guise, punishment and even "teaching" of the room shoes, your saturate pets does not react, alas, so badly push the grid from the window.

Spring has come and the cat also wants active movement and "flying vitamins". Surely, if you live above the fifth-sixth floor, you noticed the birds, trying to find food in the cities, sit on the windowsill and carefully examine the mosquito net, trying to squeeze the insect stuck there.

Attention to the owners of fluffy family members!

So that you are not afraid of damage to the grid by the cat and did not fear that he himself can fall out from 10 floors, companies manufacturing mosquito nets began to cover them with a special substance, polyvinyl chloride, called "Anticress". The mesh from the usual aluminum weaving is covered by this chemical substance - polyvinyl chloride.

You have nothing to be afraid - the air will do no less air than and there is no obstacle for light. But from insects and unwanted moisture, together with industrial gases, such as chlorine, nitrogen dioxide, salts, alkalis, acids present in the air of modern cities, this coating can protect.

Also, the covering layer of polyvinyl chloride so strengthens the grid that neither cat claws nor the beans are scared. Nothing can now damage your protection against insects, poplar fluff and large suspended particles.

The grid covered with the "anticress" becomes so strong that it is not afraid of any claws of your fluffy pet, nor the beak bird, nor the most distinct damage. It can not be spoiled at all somehow or break by chance. For fastening the mosquito net to the window, special fasteners are used (we remind you that "fasteners" and "strong" single words, the essence of which is the same).

The owners of cats and cats can be calm for their pet: the fall out of the window of the apartment does not threaten him. And the beak of the hungry bird, no matter how hard she tried to break the grid and get the midge, stuck there, does not damage your mosquito net coated with polyvinyl chloride.

Of course, there are funds of traditional medicine used by our grandmothers and great-grandmothers, helping to protect themselves from mosquitoes and other insects flying in the summer to the house and day and night. But all residents of the country know that the best insect protection is a mosquito net.

How to care for mosquito net

When it grows so much that active ventilation instead of fresh air will bring a runny nose and colds, the grids should be removed from the door and window openings.

After removal, at least once a year, we need to wash the weaving with soap solution. Do not rinse fasteners.

What types of mosquito nets have already been released

• "Antipl"
• "Antikushka"
• Sliding
• For doors
• Rolled

What are the fasteners are used

• mounts with a tape or magnetic tape;
• plist;
• roll-type mounts;
• "Antipul";
• sliding frames;
• "Antikushka";
• removable frame mounts.

Details of each type

"Antikushka"

Those owners of apartments who have a fluffy friend, a cat or a cat, you need to look at the anticress mosquito grid, which is made specifically - in order to protect the pet and the grid from trouble. Used in this type of strong threads, which maintain heavy loads and are not damaged, eliminating the family budget from unnecessary shocks. It also ensures the safety of a cat or cat.

The grid is also fastened by a special fastening, so reliable that it is withstanding the pressure on it not only an animal, but also a small child, and this dramatically improves safety and children and animals. Another attractive feature of this species - the grid is not necessary to shoot for the winter, it does not spoil even frosts and the winds of the snowy of the year.

Sliding

It is suitable not only on the windows, but also on balconies and terraces. Present two, walking on a special half-board, which are closed and reveal comfortably and simply. Visibility for this type does not decrease due to gray.

Rolled

It is the most efficient type of all listed above. Folded in roll and box. It is attached at the top, then unfolds, covering the window. This species is different from all its good functionality.

Even one who first keeps a construction or plumbing tool in his hands, it can simply cope with the installation and fastening of such a grid, because there is absolutely unusual in the installation. Significant plus - it does not require care and special attention. But, like everywhere and always, all the best has a common minus - the price. It is not cheap.

"Antipl"

Beach of our time is allergic, it is found so often that it is worth producing a mosquito net with very small cells that can delay the dust suspended in the air, large particles and small.

Attention! Notice to those who are sick.

Cons There are also - quickly stuffed with mud and dust. This is a significant disadvantage that can provoke an aggravation of an allergic disease. However, each good mistress is all over the shoulder - it is simply necessary to periodically rinse the grid with soap solution and wipe dry with a soft cloth. It is also desirable to dry in a dry, pure, protected from the wind, where there is no dust.

"Antipul" looks organically and misses sunlight pretty good. The view of the window does not spoil. Along with the advantages, there is a disadvantage - expensive. The price is not for everyone to pocket that badly affects the sale of goods. However, those who still risked to purchase this species remained very satisfied. The grid acquitted the expended finances.

Mesh for doors

The invention of such grids is a significant event for potential users. Along with the function of protecting an apartment or houses from insects, they perform another feature - this is an unusual air flow regulator to the room.

Mounted on the loop, and hold in a closed form by small magnets. By purchasing and using such a grid, you get rid of drafts in the room and the house, since the air flow, facing the obstacle in the form of a grid, reduces the speed of its movement

Considering mosquito nets, we cannot bypass the attachment of these meshes to the window and doorways. Mounts on the grid may be:

With hinge;

• using ears;
• with plunger pins;
• with z-shaped mounts.

The last type of fastening is the most reliable and convenient option - no extra holes in the doorway are not needed.

However, these fasteners are not suitable for the grid "Antikushka", because there are very small bends, constituting only 0.5 mm and cannot withstand mechanical pressure. The grid may spoil. Also with the grid "Antipl" this type of fastening is not suitable. It remains a gap of 2-3 mm, which will not miss the mosquito, but will miss dust, although the most dodged insects can penetrate this gap.

Such an attachment can be supplied to plastic windows, where it is not desirable to do holes, and on wooden, in which, although it is possible to do an extra, but it will spoil the same type of frame.

Fastening with pins is more reliable and practical, because they need to be screwed into the frame. Elements are made of stainless steel, so the mesh is adjacent to the frame, it is very convenient to mount for installing the grid and its removal, i.e. dismantling.

The hinge mount is better to use on the balcony doors, veranda or terraces, while it is necessary to strengthen the elements, because the load on the frame door is much larger than the window. Often use a strengthened profile on the advice of specialists.

Everyone can stand in front of the choice: what attachment still choose, so that it fit in all respects and was the best for the window? It all depends on the type of window. So, if you need to close the plastic window with a mosquito net, you need self-tapping screws and fasteners, eight and four, respectively.

The first step to install the grid will be measurements.

Further steps are as simple as the first. Need to install fasteners. The angular fasteners are installed in the corners of the frame or doors, then the irregularities are installed, at a distance of each other.

To make a dismantling of the mosquito net, you need to take on both hands for plastic holders and pull them up, so that the bottom edge of the grid has been released. Then she needs to be rejected and free over. Rotate the grid slightly and pick up into the room.

As can be seen from the description of dismantling and installing there is nothing special, which requires special knowledge. Even on the plastic window is very easy to wear and remove the mosquito net. Therefore, if everyone carefully read, then these knowledge should be enough and without contacting a specialist. You can do everything with your own hands without spending money on the installation and disassembly.

How to install mosquito nets on the windows

Those who live in Russia, especially in its middle lane, are very familiar with summer problems: mosquitoes, midges, all types of insects, as well as a poplar fluff and carrying dust wind. Raised and elevated temperatures in the apartment, and as a result of this - a stuff.

At the same time, insects and stuffiness are inextricably linked, as the insension of midges and mosquitoes go. And the struggle, respectively, with insects closely connected with the fight against a stuff in the apartment. After all, insects so want to fly to apartments and houses in uncountable quantities.

If you remember the distant past of residents of cities and villages of our country, then the old way of salvation comes to the memory of the annoying mosquitoes, flies and midges. And this method is march. Which helped to some extent. Now the problem is solved at the production level - mosquito nets have been released.

Grids from mosquitoes and any other troubles, like insects and dust, represents the design, quite durable and reliable, which insert into the openings of windows and forces.

What to pay attention to

Mosquito nets are pretty light designs, so they are easily fixed on the frame and are kept using grooves specifically made for installation. For easier setting of the grid, small handles are made on the sides.

Employees of the company can also be installed in the window frames, specialists in this business, and owners of housing themselves.

During the work, one single difficulty may appear - establishing grooves for grids from mosquitoes where you need to insert them and insert (if you have more modern windows, then you do not have attachments for mosquito nets.

Mosquito nets are made of material - extruded aluminum, which is a profile. And this mosquito net is fixed on a mosquito using a rubber cord. Prevents the passage of insect cell, which is 1 square meter. mm (1mm x1 mm). In addition to beauty and accuracy from aesthetic point of view, a mosquito net has an attractive side - it does not require some special care, it is quickly removed, it is weddown and also quickly and without problems is placed in place.

Important information!

The company can offer a variety of color solutions of an aluminum mosquito net, except for white, gray and already released brown standard. At the request of the buyer, you can pick up the color of the lattice in tone to the color of the house or in the color of bricks and cladding. This contributes to the improvement of the general view of the apartment building, but does not interfere with the passage of light and air to the room of a separate apartment.

What gives the establishment of a mosquito net to the window of an apartment or at home? Ordering and installing mosquito nets, you can long get rid of dust of the city, a poplar fluff, which seems to be omnipresent during the dispersion, from insects that do not give peace, no night, and all the troubles associated with their appearance.

The manufacturing company and mosquito net installer provided two types of fastening mosquito nets, the choice of one of them or other depends on the need and wishes of the customer. And also from the quality of establishing this window accessory. Opportunities are increasing daily. Everything is done to satisfy tastes, wishes and customer opportunities, as well as to improve the type of windows, which affects the overall impression of the city or private house.

Establishing a mosquito net: the right and professional approach to business

To competently and correctly install a mosquito net, you need to make several consecutive steps: take the grid for the handle on both sides, start the upper fastenings for the influx of the window frame and lift the grid as much as possible, until it stops.

Next, you must attract the grid a little to yourself, hooking the bottom mount in the form of hooks for the influx of the frame and install the mosquito net, aligning it by the window, to the position of the fixed component of the entire window.

A simple method of removing mosquito net on the frame

With this work, it will not be done not even very familiar with the mesh device, who just will try to do it a couple of times.

To remove (dismantling) the grid is necessary: \u200b\u200bTake the grid for the handle and slightly pull it up until the mount selected for this grid, i.e. Hooks at the top are not disconnected from the clutch with the influx of the frame. Then reject it out and lower a little. Fastening is disconnected and only one step remains: make a grid in the room, followed by processing until the next season. As you can see, it's not cunning, even a teenager will cope. If a little discern how fasteners act. Moreover, it is under the force of an adult person, not even depending on the floor. Women are now independent, and devices helping to simplify us existence, very comfortable and easy to use.

Z-shaped corners in the mounted mesh is the most reliable and simple method. In addition to practicality, it is also economically beneficial - it is not necessary to spoil the metal-plastic frame if we install such an attachment on it.

The only inconvenience of this type of fastener is that you need to dry out the window, install fastening corners on the screws. It is very dangerous to a person who is not familiar with the work of the device does not have enough skill and the forces to resist weight with a tool in hands and for those who have problems with a vegetual-vascular system, and who does not tolerate height.

How to attach mosquito net on fasteners

1. At the beginning, read the relevant information, how to do it right, thoroughly familiarize yourself with how the fasteners will act, then not stopping, calmly do the work from beginning to end.

2. Forward - screw the top mount on the screws to the screws.

3. You need to measure from the influx of the window on the side of 50 mm and mark these distances, following the labels everywhere at the same distance.

4. After this, it is necessary to attach long fastening components to notes and fasten them with screws.

Your attention: advice!

Pick screws with a length of no more than 20 mm, so that the fastening well kept on the one hand and did not rest in reinforcement.

If you have no sufficient distance from the influx of the window, i.e. There is no conventional 50 mm, then measure the minimum distance from all sides of the window, and it should not be less than 30 mm, and slide everywhere noted. After establishing and attaching the upper corners of the Z-shaped mount, you must install the bottom corners of the fastening. And here may already have incomprehensible moments, since there are two options for fastening the upper corners in this method.

First - option a

This option attaching the lower corners is quite acceptable only if the owner of the apartment lives on the first floor or the mosquito net is set by this type of fastening on the windows of the private house, i.e. Where you can come from the street to the window. Otherwise, it is inappropriate to do, because it is necessary to install fasteners carefully and extinct all distances, and on the weight it is very dangerous for the life of a person setting the grid. The installation itself consists of the following steps: taking the grid in the hands and installing into the upper mounts, deflect the grid on yourself, lifting the pre-ass, and the lower edge of the grid attach to the profile. Someone must make a mark on the lower edge of the mosquito net.

ATTENTION: Important information!

At this time, when the assistant makes the label, you must hold the mesh in a state-snapped in the upper mounts. Then you can lower the grid for 27 mm and make the bottom final marks to screw the lower mounts, in short, using screws.

Second - option b

This option can be used in all cases, it is easier and safer, but it is especially applicable, when it is impossible to approach the window outside and make a mark, prepaying the mosquito net to the window frame. This option is as follows: first, as in the embodiment, it is necessary to fasten the upper mounts, then we measure the length of the mosquito net to a millimeter, adding another 27 mm, measure the distance from the end of the upper fastening and mark this place. There and screw the lower fastenings with screws of the corresponding length, which is written above.

The last step is to establish the mosquito mesh itself is simple: take the grid for the handle attached to the frame, start over the upper mount, lift a little up so that the bottom, attracted to itself, will start to the bottom mount and squeeze the grid. We try to align it on the frame that it would not jump from installed fasteners and was not overwhelmed.

Attention to those who doubt that it can correctly and qualitatively install a mosquito net: you can contact the company to establish grids and call home a specialist who will make this work for you for a certain fee. It is easier to pay for qualified work than to expose your life danger.

Establishing a mosquito net yourself: how to do it

In the summer, during the spread of insects, which can fly to the apartment even through a small gap, there is usually sunny weather on the street and you want to open a window and pour fresh air. But because of the insects it becomes problematic.

Ordinary "guests" in the summer time in houses and apartments with open windows - butterflies, beetles, moles, flies, mosquitoes, moshkara, various other representatives of the insect world, with which it is not very pleasant to share their food and housing. But there are not so dangerous by their presence, like those of the diseases that they can apply.

In addition to insects, even small birds can be placed in the apartment or penetrate the dust suspension, which is saturated with urban air, poplar fluff and other unpleasant randomness. There is still a yield: you need to mount a mosquito net to open windows. Mosquito net consists of a frame made of aluminum and the canvas itself, which is fixed on the frame. There are handles for which you can raise when installing the mesh in the frame.

The frame of their aluminum profile can be painted under the color gamut of the window, and leave the grid to be sulfur, so as not to stand out on the background of the window, for convenience.

There is nothing complicated in the design of the mosquito net, everything is very simple and to figure it out in it will not be difficult for even a teenager who can keep the tools in their hands. In installing it, there should also be no difficulty. If you have already had a mosquito net, but it was demolished from time to time, it can be done even easier to remove the dimensions with the old grid and book a new one.

You can buy a ready-made grid on any warehouse of finished products where window blocks are stored, mesh on windows and other accessories for a decent view of your window. It happens that the window is sold without components, ordinary for plastic windows. No mosquito net. In this case, you need a little more effort - you need to measure the opening of your window around the perimeter. Then it is necessary to add 3 centimeters from above and below and on the sides of 2 centimeters to the obtained measurements. Having received an order, see if there are all components - two mounts added to the mosquito net: top and bottom.

The top and bottom mount differ, the upper mount is wider than the lower one. It is important to distinguish them, because when installing the window, the mount will correctly and reliably keep the grid only if it is installed correctly. Very important moment is it for fixing fastening and grid.

Then the mount is necessary, which is attached at the bottom to attach from the bottom so that the mosquito net is lower than the window opening by 1.5 cm, so that there is no gap and nothing falls out into the window. After that, the upper mount must be placed and secured on the top of the window.

Attention! It is necessary to read carefully!

In order to find the edge of the upper attachment to correctly, it is necessary to measure the length of the grid from the lower mount and add 1 cm to this size, it will be the lower limit of the upper mount.

Insert the grid will not be much difficulty. To do this, it is necessary to carefully pull out the grid out of the room outside, raise up, pull to yourself and slowly lower to the bottom mount, while the grid does not sit in the grooves and will not fix on the mount.

In the same way, you can put a mosquito net and on wooden frames, only there is a necessary requirement for Ramam. So that the grid was whole and did not break through, it is necessary that the frames have discovered inward, and not out. It is also necessary that there are no irregularities on the frame, otherwise the grid will sit unevenly.

Mosquito net can be installed in two ways.

The first method of the equipment of the window with a mosquito net is that the grid is installed in the internal attached attachments. Initially, we take it for the handle and slightly tilted, we start up the opening of the windows at the top and raise it until it stops.

Then the lower edge of the grid is attracted to its side and start the grid inward, for the lower influx of the frame, setting the bottom of the grid to the lower mount. After such installing manipulations, the grid align relative to the frame.

The second method is as follows: Mosquito net is installed using Z-shaped fasteners, which are attached to the outside frame. This method, of course, is more reliable, but for a person unprepared, not a professional he is more dangerous.

Important information!

To establish z-shaped fasteners on the mosquito net, it is necessary to be on the outside of the window. The top corners are first strengthened, after that - the bottom.

Mosquito net: Is it worth spending time on it

Do not want to make an extra work, especially if all this is someone else's. Install or not install the grid on your private window, the dilemma is easily soluble. Summer time brings us not only summer sun, apples and strawberries, but also clouds of mosquitoes, midges and other harmful and not very midges, beetles and spiders. And also heaps of dust, fluff and every suspension in the air. Talk about the harm of the bits of mosquitoes and other insects, after which the combed wounds remain,

Dust, flushing into the fine window, falling into food, and even into the lungs from inhalation in the room, causes allergic reactions. So as not to happen, you need to install grids from mosquitoes that will protect both from insects, the same from dust. Mol is also not a very nice neighbor of man. Decomposes not only human health, but also harm to his wallet. And this is another argument to decide and order a mosquito net.

The grid from mosquitoes and fluff consists of an aluminum frame, with a mosquito mosquito hung and attached to it. The frame is made of aluminum, and a mosquito net with small cells from a strong metal wire.

The color of the mesh and frames are different. Typically, the mesh is left unpainted or stained in gray, and the frame is painted under the color of the window, but all this is to taste and the wishes of the owner. The aesthetic side is certainly important, but most importantly, for which they put the grid - this is the protection of the house from insects and dust.

The grid has another feature that is not always remembered - this is protection against plant fluff. Just during the flowering period and it is important to use.

The mosquito net protects against dust flying in the wind of leaves, large and smaller suspended particles, as well as from accidental falling out of the window of pets and young children, although you need to follow the children, so as not to climb the windowsill.

There is a good and convenient quality of mosquito nets that you do not need to care for her. Other, of course, it is necessary to wash it in a year, warm with a soapy solution, wipe dry and put on drying to the place where there is no dust. You can use any detergents instead of soap.

Treat mosquito net is very easy and simple because it is very easy to remove and again. Even the manufacture of a mosquito net is the process is not complicated technologically, therefore it is not possible to make it on its own, the main thing is to have a desire and a little material.

Indeed, no special knowledge is required for self-making, there are no expensive tools. Yes, and cash also do not have to spend as much as it can go to order and making a mosquito net from the manufacturers of windows and grids and the installation of its specialists from these companies. Self-made grid will cost much cheaper and more attractive - after all, you invest your skill and soul into it.

Install the mesh from mosquitoes can be literally very quickly - from half an hour before the hour. Sometimes it takes just a few minutes. And the mosquito net is installed on all sorts of doors and windows. The time of establishing a mosquito net is calculated, depending on the complexity of the installation.

Specialists argue that a mosquito net is installed on a standard metalplastic window for 1-2 days.

In the event that the old mosquito net is no longer suitable, or it has become unusable. It is better to measure its size and order exactly the same, new. Here the main question arises - where to order a grid. It is best possible to order in the firm in which the windows bought. Sometimes there are spare options in the warehouse. But if you want to save, that is, a simpler exit. Often on wholesale warehouses, where they buy all the lacking manufacturers, sometimes sell components and individuals. If you buy a mosquito net separately and frame separately or profile and make a mosquito net yourself, it will be more economically beneficial.

If you do everything on step-by-step instructions, you can easily cope with the manufacture and installing made by a mosquito mesh.

Step-by-step instructions for making a grid yourself

You installed windows before the winter and did not order with melloplastic windows mosquito net? Do not worry, although measurements can be done, but it will be somewhat harder than to wash the grid.

1. Do everything as described here and there will be no problems with flushing insects. First you need to open the frame that you want to close the mosquito net.

2. When the frame opening will open before your eyes, it must be measured around the perimeter: measure the height and width of the frame outright.

3. After measured, add 3 centimeters to height on both sides, and two sides are two. 4. In the manufacture of the order, if you still decide to order a grid, you are required to give not only it yourself, but also components: fasteners for installing the frame.

5. Included there will be two fasteners, including fasteners up and down.

6.The attention to pay attention to not confuse that the top mounting device is wider than the bottom.

7. Next step - competently and correctly arrange fasteners on the frame and fasten with screws.

8. In order that everything turned out correctly, it is necessary to first install the lower mount, which will be on the outside of the frame and should settle down so that the lower edge of the mosquito net, which will sit in the fastening grooves, would be below the edge of the frame by 1.5 cm .

9. On the upper part of the frame should be the upper mount.

10. For determining the site of the upper mount, you need to measure the length of the mesh plus one centimeter from the lower mount. Insert the grid when the fasteners will be installed, it is not difficult.

11.ToB Insert a frame with a mosquito net, you need to pull out the grid to outward, insert the top edge into the upper mount, then pull the frame to the window frame and smoothly lower down to the installation of the bottom edge into the bottom mount.

12. It is possible to put the mosquito net and on the wooden frame window, the main thing for this, so that there were no protrusions on the frame that would spoil the grid and prevented the tight fit to the frame.

13. In a wooden frame there are certain design features that can break the grid.

14. The mosquito net can be set using two fastening methods, the selection of the mounting type depends on the quality of the installation of the window and the preference of the customer.

15. Setting the grid with the help of internal mounts. Used on plastic windows.

16. The first step in setting the grid is to take the frame for the handles, pulling it outward, start mounting in the form of hooks for the window top of breath and raise the frame until it stops.

17.The regular step in setting the grid - to start the lower edge of the frame with hooks for the lower influx of the window frame and omit the mesh to the lower part of the frame mount.

18. The only one that needs to be done is to align the grid so that it stood smoothly and neatly relative to the window.

The second method of fastening the frame with a mosquito mosquito is a mounting on z-shaped fasteners.

19. This fastening begins with the fact that the upper mount on the screws is attached.

20. The next - from the edge of the upper chapter on both sides of the window frame, you need to measure 50 mm and mark these places. Packages put the top mount and attach securely with screws.

21.Thelina screws should be no more than 20 mm, large screws may continue to frame reinforcement.

22. Became how the upper parts of the attachment will be installed, you can start fastening the lower fasteners. The lower fasteners can be installed in two ways.

23. First method is outdoor, i.e. When you can come outside to the window. Then it is necessary to insert the top edge of the frame with the grid in the upper mount, lift it and pull it to yourself to attach the frame, the bottom edge to the profile of the frame.

24. Assistant, the finding of which is desirable at the same time, so that the marks were not overwhelmed, notes the lower edge of the frame, setting the mark. After that, it is possible for these notes to put the lower mount to the frame and fasten it with screws.

25. If you live not on the first floor and there is no possibility to approach the frame outside, for example, from the balcony, you can use the second method of fastening.

26. After that the upper mount was already attached, it is possible to postpone the length of the mosquito net plus 27 mm from it, put the mark on the distortion distance and attach the lower mount.

27. After the bottom mount is fixed already with screws, it is necessary to bring the frame to the outward, holding it for the handle, fix it for the upper mount, omit the frame, pulling the bottom edge of the mosquito net to the lower mount and strengthen it in the mount, install the grid.

The fastening of this species is recognized as the most reliable and strong, but this is the most dangerous occupation, such a way of fastening, because it is necessary to turn out to outward, to secure the upper mount on the screws, and this requires certain physical qualities: forces, skills and some others.

After the grid is installed, you can rejoice in fresh air and not be afraid of neither mosquitoes, nor flies or other insects, as well as dust and fluff.

Mosquito nets: how to install them

Very useful invention - mosquito nets firmly entered our lives. They protect us from harmful and just annoying insects, such as mosquitoes, midges, other insects. Air passes through the grid, but the dust remains on the street, which is also very important for the health of the family living in the apartment. Therefore, more and more often the question arises: how to install mosquito nets? The answer can be found by reading this information.

Mailing mosquito net on the window

To install a mosquito net yourself, you must have 4 fasteners and two screws on each fastener (8 pieces). It is also necessary to remove the size from the mosquito net. Next you need to transfer marking by attaching the grid to the window. The angular fasteners and not angular are attached differently. Corner - in the corners of the frame, and the frequent - in the center of the side parts of the frame.

Important information!

The upper fastep must be installed above the upper corner of the grid at a distance of 12 mm, to ensure the commercial mesh in the mount. To twist screws use a screwdriver.

A mosquito net is removed very simple, enough movements for this. It is necessary to take the grid for the handles, to raise it vertically up, until it is free from the mounting of the upper edge of the grid, then slowly - down, before disconnecting the bottom mounting from the grid. Then turning a slightly grid, add it to the room.

Setting mosquito net on the door

Establishing a mosquito net on the door of the veranda, balcony, terraces, ensures the mounting: loops, clamping mechanisms and magnets.

Before installation first, there are places where the loops will be attached, and then they are already twisted with self-drawing, fixing on the window profile.

Later, the grid dresses on the loop and is fixed by the mechanisms of the clamp. At the end of the installation, small magnets are attached to fix the frame with the grid and ensure a dense fit.

How to put a mosquito net on plastic windows

Summer time brings us not only sea joys, strawberries and a lot of delicious things, but also clouds of midges, mosquitoes, flies and any insects, with whom we do not wish to live in the same room. Therefore, the best solution from all that can be accepted at such a year is a solution to install a mosquito net on the windows and to get rid of all the audience.

How to make a mosquito net yourself, along with all the fasteners, you can learn from this article.

Mosquito nets do it yourself: step first - mount for grids

Well, if you have a mosquito net with a fastening, which is waiting for its o'clock. Here is what you can do:

1. It is necessary to take the mosquito net and turn the fastening to your face. Moreover, it should be noted that the attachment at the bottom and above differ from each other. Turn over the grid with a large fastening up. This will be the correct position of the grid.

2. The whole strength should be taken for the vertically handles on the grid, which are made either from metal or plastic.

3. Set the shutter on the window opening to the place specifically prepared for the mesh and fastening the frame with the grid.

4. Upper hook hook to start the protruding top of the window, lifting the grid as high as possible.

5. In the raised state, bring down the lower hooks for the lower influx of the window and lower the grid smoothly.

Here is the easiest way to install a mosquito net, while in the case when you already have all the fasteners. But this method is not suitable for all windows, especially plastic.

Fastening the grid design on the window

Consider another method of fastening the mesh on the window with the help of plastic corners.

The method of fastening is not new and universal, but if you have plastic windows, it can be considered. And it is better to study and explore.

Fasteners are installed on the window directly, and not on the mosquito net frame.

You need to perform the following steps:

Measure everything you need to work.

Apply all the necessary tags for plastic corners to know where to attach them to the plastic windows.

With the help of self-samples, you need to attach plastic corners to the windows of the window, given the reserves.

The next step is to install the mosquito net, which is installed in the same way as the previous one, first fixing the upper fasteners, then the bottom.

Establishing a mosquito net on the doorway

Mosquito nets installed on the door can be divided into: freely hanging and those that are fixed in the framework for grids.

There is one difficulty in installing a mosquito net on the door: it is almost impossible to install it yourself. In any case, it will be very difficult to do.

The thing is that they supply components only for specialists, in kits for them, the usual person will be very difficult to figure out.

Important information!

For example, you can take mosquito nets with a frame, you need to fix them in the same way as the doors.

And if the grid is freely hanging, it is fixed by magnets throughout the door perimeter, in the middle combined with a magnetic clasp.

Such work can be made preferably professionals, it will be safer and reliable, and in the event that the grid will be with a marriage, then you will also be returned to money or redo.

Two handles and magnetic latch are included with the door mosquito structure. In some cases, the door is very high, so you can put one, or two imposses.

Installation time is different. You can install a mosquito net for fifteen minutes, and it is possible in two hours. It all depends on the complexity of the design.

Fastening mosquitoes: features

If you decide to install a mosquito net to a window or door, it will differ little from already early described, but you can select a few moments that need to be remembered:

Product, i.e. the grid, it is necessary when setting to start the upper surface;

When the grid is raised to the maximum height, you need to start the lower angle of it for the lower guide;

Then only you need to lower the grid smoothly.

The installation process itself takes a little time - until half an hour.

If you have a normal mesh, factory, standard, then it can be installed in a couple of minutes.

But the grid with the Z-shaped mount, the installation time will already be a little more - until half an hour, because the design is more complicated.

Attention: useful information!

Metal fastening is considered the most reliable fastening. These fasteners serve for a very long time: do not crack, do not spoil from weather or other temperature drops, withstand the most frosty winters.

Reliability is expressed in the fact that the mounting from the metal hold the grid even with the strongest torment of the wind, unlike the plastic fasteners, which jump from the gust of the wind and do not hold the grid.

An interesting design of the mosquito net is a rat-type grid. It is installed only together, but it is better to give it the right to specialists, because with the slightest deficiency, the grid is found on Earth or loss of components.

You can also say about one characteristics of this complex design. The grid when removing twists. It twists, if you remove it from the magnets, when removing the grid from the window or in some other cases. If it is nothing to keep the net and it will be twisted many times, unfortunately, this complex design will come into disrepair.

At the end of the article, it can be said that if you do not have the easiest fastening of the mosquito net, you can gladly trust specialists to be calm and not worry that tomorrow everything fails.

Often, situations happen in life when there is a need to establish or change the mosquito net. The need for replacement, usually, occurs in families with children, the rate loves experiments, and therefore damage mosquitoes are inevitable.
For those who are not familiar with the specifics of mosquito nets for plastic windows, the installation of a new product turns into a real blood pressure. To get rid of many hours of torment, we offer several ways to install. We recommend reading the article carefully, and save in bookmarks or print. If necessary, at hand there will always be a hint.

The warm season is the time of the activity of all kinds of insect species. Intentently or not, they seek to get into the houses of people through doors and windows. Ancient flies, mosquitoes, spiders and beetles bring many inconveniences. Therefore, it is obvious that everyone is looking for the ability to defend. Mosquito nets come to revenue, or as they are called mosquito people. These parts allow fresh air to freely penetrate the room and protect against insects. Thus, you can constantly leave the doors and windows open.

Mosquito for plastic windows: firmly and reliable

In the modern world it is impossible to submit a window without a mosquito net. Thanks to her, people are delivered from annoying insects and a poplar fluff filling the room. A simple and little noticeable design, combined with functionality made mosquito nets an indispensable accessory in the interior.

A simple design and convenient shape of the attachment allowed mosquitoes to become the most popular addition to a new plastic window.

In the summer I want the house as much fresh air as possible. But open window openings cannot provide a full air circulation. Previously, exit from this situation did not exist. Purchase a protective accessory for balcony doors did not exist. We had to do with subright means, such as gauze. Manufacturers drew attention to the needs of consumers, and developed special grids for balcony doors. They have a swollen mechanism, and without problems fit in the doorway of any type.

The hosts of pets are familiar to the situation when the first sun rays lure cats to the balconies. There they are hunting all day on flying past birds, and then love to "scratch" claws about the mosquito net. And no matter how try, explain to the animal that it is impossible to do this. Loves will try to squeeze the grid.

Often you can see the birds that are circling near the window, trying to pull the stuck mosquito or midge. This phenomenon, especially often, can observe residents of the upper floors.

Given the wishes of customers, manufacturers have developed a special model of the grid "Antiška", with an enhanced PVC coating. The substance used in the production of this design does not harm human health. And it is not inferior to ordinary meshes in air bandwidth and light. At the same time, the "anticress" protects against mosquitoes, midges and flies, as well as from solutions of salts, alkalis and basic acids, industrial gases and moisture.

Special technology processing mosquito net makes it very durable. It is almost impossible to damage or scratch the product. Now you should not worry about what your pet is falling out of the window. And birds wishing to enjoy midges made in the grid do not violate its integrity.

No folk remedy, somehow the smell of anise, carnations or eucalyptus does not guarantee one hundred percent protection against mosquitoes. Welcome forever forget about night buzz can only mosquitoes.

Care and types of mosquitoes on plastic frames

Each owner wants that the windows on the windows served as long as possible. To do this, adhere to simple rules for the care of them.

Before you purchase a mosquito net, you need to carefully carry out measurements, and determine the size of the product. To do this, open the window, measure the lighting light. After, add to each parameter for another 20 millimeters. The result is the desired grid size from insects.

• For doors. One of the new developments. They perform the function not only in the insect protection, but also regulate the flow of air flow. In addition, the mosquito for doors is guaranteed to save the house from drafts. Fix similar products on special loops. The grid is fixed using a magnet.
• Antikushka. This type of grid is needed by domestic owners. Especially for such consumers, this model was developed. Due to the fact that the favorite will not be able to damage and spoil the product. In addition, this type of mosquito is equipped with additional fasteners, which increases its safety. This grid is not required to take off for the winter, since the increased strength of the grid makes it capable of withstanding the most tall frost.
• Antiple. Today, allergic to dust acquired the scale of the epidemic. The disease is distributed to people of all ages and segments of the population. Keep yourself and close to unpleasant symptoms will help the Mosquito net "Antipul". The product is created on the basis of very dense tissue, which is able to delay the smallest dust particles. However, this leads to rapid pollution. But mosquitoes are cleared very simple. All that you need is to wash the surface of the mesh with soap solution, after which we wipe with a dry cloth.

The grid does not affect the penetration of sunlight into the room, and does not worsen the appearance of the window.
The lack of the grid is one - high cost.

• Rolled - for many, this is considered the most optimal solution. The advantage of the grid is its multifunctionality, they are used to close windows and doors, terraces and balconies. As a collected form, they look like a roll in the box. An additional advantage is simple care for products. The installation process is also as simple as possible. But the main disadvantage of such a model is a high price.
• Sliding - can be used to protect windows, as well as balconies and terraces. This type of grid opens and closes with two sliding parts. Closed mosquitoes do not affect visibility from the window, due to gray. To mount a sliding grid, you will need to install special guides.

There are various types of fasteners for mokut grids:

• Antipl;
• Frame removable;
• Antitox;
• Frame sliding;
• Magnetic tape or scotching;
• Pile;
• Rolled.

Speaking about mosquito nets, you can not forget about the types of their attachment. There are 4 of their kind:

• On loops;
• With ears;
• On the meal pins;
• On z - shaped fasteners.

The greatest popularity (which is quite justified) uses the last fastening option.

Z-like fasteners are reliable and comfortable. Another "plus" is that there is no need to make additional holes in the window frame. The use of this attachment is permissible for wooden and plastic windows. Lack of fasteners - a loose fit of mosquito to the frame. Clauses, makes it possible to a small amount of insects and dust to penetrate the room.

For mounting the pins will have to do holes in the window frame. Thus, fasteners are very reliable. With the help of such mounting, the mosquito fits tightly to the frame, and stainless steel elements guarantee many years of fixing service. If necessary, the grid is quickly removed and dismantled.

For doors, the best option will be fastening on the hinges. For this, due to increased load, an enhanced type of profile is used.

An unambiguous answer about what kind of fastening does not exist. It is necessary to take into account the place where the installation will be carried out. For windows from plastic, it will take eight screws and four fasteners. First spend measurements. After that, non-burning fasteners are mounted equally from each other. Corner parts are installed at the corners.

Mosquito dismantling is also very simple. In order to remove it, take the plastic holders, and carefully, but with the effort pull up. So, the grid comes out of the lower holders. After that, it is rejected, and remove the top. After that, everything you need to do is hide the mosquito net in the storeroom until the next summer.

Obviously, the removal of mosquito net is not difficult. The process is very simple, even when the procedure must be carried out with a plastic window. To remove the grid, there is no need to ask for help from professionals. Even a person who has no experience can cope with the removal of a mosquito net.

Installing mosquitoes on the windows

We all face the problems of warm season: flies, mosquitoes, midges; Duchot; A poplar fluff and dust in the house. It is difficult to find a solution for all tasks immediately. The fight against mosquitoes and other insects is inextricably linked with the appearance of excessive stuffiness, and vice versa.

Starting from spring and to late autumn in an open window, all sorts of insects are continuously flown.

Previously, the only solution to the problem was Marley. It was mounted in the door and window frames. But thanks to modern technologies, get rid of midges, and provide regular air intake, mosquito nets are designed on frames for windows.

These products represent heavy-duty structures. They are installed in the windows and window openings. Mosquito design is very easy. This makes it possible to consolidate them with the help of the so-called grooves designed specifically for this purpose. In addition, all grids are equipped with special handles to simplify the installation process.

To install the window grid from insects, you can use the services of a professional from the window firm or do it yourself. The procedure is very simple. The only difficulty that usually occurs from non-professional - installation of grooves. In the future, mosquito nets will be attached to these details.

Frame for mosquitoes produce from a special aluminum profile. A grid that will directly protect the house from insects, attached to the base of the product with a rubber lace.

An obstacle to the penetration of insects into the house is very small lattices on the grid, their standard size is 1x1 mm. Mosquitoes are aesthetically fit into the interior of the room, and do not spoil the general view of the window. Products provide unhindered circulation of air flows and penetration of sunlight.

Additional advantage is the ease of caring for a grid, a prostate of removal and establishment.

To please customers, companies offer classic colors of mesh: gray, white and brown. At the request of the customer, the mosquito can be performed in any other color.

Having bought a mesh on the windows, you will forever forget about insects, dust and a poplar floss in the house for many years. Products are not deformed under the influence of external factors, do not fade.

The mounting mesh on the window is produced using one of two types of fasteners. The choice will be driving the customer's desire, and the quality of the window mounting.

Correct installation of mosquito net on the window frame

Although the grid installation does not require special knowledge, some nuances still need to be considered. To begin with, take the mosquito for the handle, located on the side of the product. After, it is necessary to start long fastenings (the so-called hooks) for the influx of the window frame. Now, lift the mosquito upwards. At the next stage, slightly pulling the mosquito net on itself, and at the same time, we start the hooks for the influx of the windows. Lower the mosquito on short attachments located below. Installation is made, it remains to hold the mosquito on the window opening.

Before installing, think about fasteners. Z - The shaped corners are considered a practical and reliable option for mounting the window grid.

How mosquito mesh is attached

• The installation begins with screwing with screws to the upper mounts. The size of the screws should be no more than 20 mm. When using more long-length products, they may continue to reinforce that is inside the PVC window.
• If the distance from the edge of the influx to the slope exceeds 50 mm (this is considered an ideal option), measure the influx from the edge of 50 mm on both sides. In the appropriate places, put the pencil marks.
• After, according to the early markers, attach long fasteners, and secure them with screws.
• In cases, the distance from the edge of the influx to the discovery is 50 mm, but more than 30 mm, it is necessary to determine the minimum distance, measing it from the edge of the influx on both sides. It should be started from the installation of the upper z - shaped corners, after which the lower should be installed. In this case, experts offer two possible types of installation.

Instructions for Entry Mosquito Mesh on the frame

Mosquito net must be removed every year for the winter season. In order not to resort to the help of specialists, you need to master the simple dismantling technique.

First you need to take a mosquito net for the handle, with a little effort to pull. This process should continue until the lower hooks will not leave the clutch with the influx of the window frame. When this stage is over, put forward the window grid and lower down. Ready. Now you need to make a mosquito to the room where it will be stored.

As you can see, installing and disassembling mosquito nets will not be difficult, even for an inexperienced user. However, it is still necessary to have some skill, therefore for residents of the upper floors, the procedure may be dangerous. Since it is necessary to get out of the window to the installation, at the fixation of the corners on the screws.

First option

This option is applied in cases where there is no possibility to get to the window frame from the outside to make the corresponding marks necessary to set the grid.

You need to start with the installation of upper mounts, while you need to carefully carry out the measurements of the product. After that, add 27 mm to the results obtained. The resulting length is noted from the end on the upper mount to the bottom. Now, lean fastenings directly to the marks on the frame, and secure them with screws.

When the lower and top are fixed, you can start the mesh on the frame. To do this, take the grid for the handle and start it for the top fastener. After, you need to lift the grid slightly, and at the same time pulling the product to the frame, and lower the mosquito to the bottom mounting element. At the last stage, we adjust the position of the mosquito net and align it.

If even after you read the above instructions, the mesh installation seems difficult, it is recommended to refer to the specialists. In addition, buying a mosquito net, you can immediately order the installation service.

Second option

This technique is applied at dachas and houses; In the apartments located on the first floor or if both sash are opened in the window. These requirements are due to the need to sew the outside of the profile from the outside.

It is necessary to take a mosquito, and install it in the attachments located at the top. Next, we raise, and lightly sending to yourself, lean the bottom of the grid in the frame. At this stage you will need help. Since simultaneously you need to make a mark on the window frame at the edges of the mosquito net.

Those who intend to apply this method should be taken into account that in the process you need to fix the grid using the upper holders. Next, measure 27 mm, after which you can make final stamps. According to them, screw short holders with screws.

Install the mosquito net yourself

With the arrival of spring and heat, people try to keep windows constantly open. However, it inevitably leads to the appearance of a large number of insects in the house: flies, mosquitoes, moths, butterflies, beetles and ants. They interfere with sleep at night, and bites cause itching and discomfort. In addition, such "neighbors" are often peddled to hazardous diseases.

The only way out of this situation, today, is the installation of a mosquito net on the windows.

The innovative design of mosquito nets protects not only from insects, but also from dust, poplar fluff and birds to the room.

The mesh frame is made of durable, ultralight aluminum. Usually, it has the color of the window frame, but at the request of the client, it can be painted in any color. And the grid itself, most often, has a light gray color. Thus, it does not stand out, merges with the scenery outside the window, and does not distract attention.

The device mesh against insects is very simple, and the installation does not require special knowledge and skills, so everyone can perform it. Therefore, if the mosquito net was damaged or worn to start it should be removed. To find out what kind of mosquito size is ordered, you just need to measure the old product. A new protective grid for windows of the required size, you can easily get in a profile store or in stock.

If the earlier window was without a grid, it is also possible to carry out measurements, although it will be more difficult to do it. To do this, you will need to open the window opening, after which the perimeter measurements are carried out. 3 cm in height and 2 cm in width are added to the results obtained.

The kit, except for the grid, includes more attachments two pairs of fixtures for the upper and lower part of the window frame. These details differ in design. The top fastener is slightly wider and has a bar. Therefore, it is impossible to confuse fastenings. However, the complexity is a reliable fixation and proper fixation on the windows frame.

The lower part of the fasteners are shown from the outer part of the frame. For reliable fixation of the product, fastenings should be below the window opening by 1 - 1.5 cm. The other mount is fixed to the upper impact.

To correctly define a place for fasteners, you should add 1 cm to the grid parameters.

The further installation process will not be difficult. In order to insert a mosquito net, it is required through the open opening to pull the grid on the outdoor side. After that, it is inserted into the upper fixing groove. This is done through the move, during which the mosquito is attracted into the inner side, and at the same time falls down.

For owners of wooden windows, there is also the possibility of mounting the anti-moskit grid. However, in this case, it is important that there were no protrusions outside the window frame (as they lead to mosquito damage), and the sash opened out.

For fastening mosquito nets there are two options:

1. In the first case, the z-shaped fasteners are used, which are attached from the outside. The first are the top items, and then the bottom. Works are carried out on the outer part of the window frame. Therefore, this method is considered dangerous for life and health if the work is carried out at high altitude.
2. For the second option, the inner fastening is characteristic. This technique is also pretty, simple. It is that mosquito, with the help of the handles, starts behind the upper window opening, and in this position it is done until it stops. When this process is completed, the attachment of the bottom is started behind the influx of the window frame. Now, it remains only to bring the grid to the lower mounts with confident movement.

The final stage in the first, and in the second cases there will be a mosquito alignment, and checking the density of its adjacent.

Do I need to install an anti-mosquito net on the windows

In the spring year it is impossible to keep windows closed. The heat makes the windows and doors on constant ventilation. However, all sorts of insects penetrate with refreshing air flows into the room. They, annoying buzz, do not allow to relax at night. In addition, their bites cause unpleasant itching and redness. No less harmful, familiar to everyone, mole. Although harm to health it does not cause, but spoils things from natural fabrics. The anti-moskit grid will be protected from pests.

The standard mosquito net is a frame of a light profile of aluminum, it serves as the basis for which the material with fine holes is attached - an anti-mosquito cloth.

Thanks to light gray color, which is painted with a mesh, product, almost inconspicuous for the human eye. The profile color corresponds to the shade of the window frame. Thus, although the main function of grids is protection against insect penetration into the room, the aesthetic component is also inherent in products. In addition, mosquitoes protect against dust, pollen, poplar fluff, this fact is especially important for people suffering from allergies. Be sure that the house will not fall into the house, leaves and other trash carrying by the wind. Thanks to modern developments, the grids protect domestic pets from falling.

Another important advantage: Mosquito nets do not require any special care. Throughout the entire period of operation, it is necessary to clean the products with a soap solution twice a year: at the beginning of the season of use - in spring and autumn, after removal.

To remove the mosquito, it does not require any special knowledge or skills, so the care for it is simple and does not take much time. It is simple, and the process of fixing the anti-arine mesh, can be able to cope with anyone who has led to such a goal.

To cleanse the grid, it is not required to purchase additional funds and tools.

For those who do not have extra funds, there is a variant of self-making mosquito. The process is not too complicated, and fast. In addition, the way it will be much cheaper than ordering products in a special workshop.

Today, you can install a mosquito net on any type of door and window opening. The installation process, depending on the size and complexity, takes from 30 minutes to an hour. However, the full cycle of the work of this type, for metal-plastic windows takes up to two days.

In cases where the mesh is already on the window, but it was worn out, it is very simple to order a new one. To do this, make measurements of the old product, and buy the grid of the same size. In such cases, it is not necessary to buy new fasteners.

When there is a need to order a grid, the main question becomes: "Where better to buy it?". Many believe that the best option is to contact the company where the window was purchased. Such a statement is true, but the purchase of the product in another profile manufacturer is as possible.

And for those who want to save, there is another option. To do this, you need to find a wholesale warehouse that is engaged in trading components for individuals and legal entities. In such organizations, you can buy an anti-mosquito net at times cheaper.

detailed instructions

Those who set new plastic windows, but for some reason did not order a mosquito net for it, it will be much more difficult to carry out measurements. But the following instruction below, the task will simplify.

• To begin with, you need to open the window to which you intend to close the mosquito;
• It is necessary to measure the length and width of the open window frame;
• To the results obtained, you need to add 3 cm to the height indicator, 2 cm to the width;
• When the manufacture of mosquito nets, you intend to entrust professionals, the company must provide not only the finished product, but also a set of fasteners for it.
• The fasteners consist of two pairs of details, various designs - for top and bottom. The upper mount is a little wider than the lower, and has a bar. During the installation process, it is very important not to confuse the details.
• Fastenings should be properly located in the opening of the window frame, and fasten them well.
• The lower fasteners should be from the outer part of the window frame. It should be placed in view of the fact that after mounting the grid should be 0.5 cm below the opening.
• The upper fastening parts, respectively, we have in the upper part of the frame.
• To accurately determine the location of parts, it is necessary to measure the height of the mosquito from the lower mounts, and add 1 cm to the result.
• If all previous steps are made correctly, insert the mosquito mesh is very simple.
• Pull the product outward window opening. Insert it in the grooves of holders from above. At the same time, slightly attract the grid on yourself so that it fits tightly to the frame. It is necessary to do this while the grid will not be strengthened into the lower mounts.
• It's not difficult to install a mosquito net on a wooden window. But in this case, it is important that the window sash discovered in inside, and there were no protrusions and gaps from the outside. It is important that the grid does not break during installation work.
• To date, there are two options for fastening the mosquito net on the frame. Their choice depends on the desire of the owner, and the quality of the window mounting.
• The first method involves fastening the grid to the plastic window with the help of internal mounts.
• In the process, the products are taken for special handles on the side, the field of this, the upper "hooks" is set for the influx of the windows. The mesh field is up to the stop.
• The next stage is to start the lower "hooks" for the influx of the window frame. Lower the mesh down on short mounts.
• When the main works are completed, the anti-mosquito net is equalized relative to the opening.
• Another consolidation method proposes to use z-shaped parts from the outer part of the window.
• To begin with, the upper mounts are fixed on the screws.
• Measure 50 cm from the edge of the influx on both sides of the window, and mark the results with a pencil or marker.
• Focusing on the marks, mount the long mountings, and fix them with screws.
• Choosing screws, it must be remembered that their length should be less than 20 cm. If the product is greater than Dina, there is a chance that the screw is reinforced into reinforcement in the pestle window.
• When the top fasteners are finished, proceed by installing the lower. For this there are two options.
• One case is used when it is possible to get to PVC profile from the outside.
• Mosquito net is inserted into the upper mounts, after which, attracting the grid to themselves, raise it, and lean the bottom to the frame.
• While one person performs the above-described actions, the second, makes marks on the edge of the window. These marks serve as indicators where you need to fasten short attachments using screws.
• Another option is used when the ability to get to the outer part of the window is impossible.
• As in the previous case, the upper mounts are first fixed.
• Now measure the size of the mosquito net, and add 2.7 cm. The resulting result is measured from the end of the upper attachment to the bottom, the mark is made in the appropriate place.
• Fastening are fixed with screws.
• We take a mosquito net on the frame for the side handles, we will start the top fastener. After, raise the bottom of the mesh to the frame, until the lower fastener is stopped.

As you can see, the process is not particularly difficult. In total after a few hours of work, fresh air will freely penetrate the room, and you can forget about flies and mosquitoes forever.

The last method is considered the most reliable and practical option. But the newcomer will be difficult to fulfill it, because it requires certain skills. Therefore, sometimes he may be dangerous to human health. Since in the process of assembly work, it is necessary to hang out from the window to fix the corners of the screws.

How Moskitka is installed

Mosquito nets tightly entered life. This is a great way to protect the house from annoying insects, without overlapping, with constant streams of fresh air. We are ready to tell about how to quickly install mosquito nets on windows and doors.

Installing a mosquito mesh on the window

To mount a mosquito, in addition to the product itself, you need to have a set of details for fixing: it includes four fasteners and as much screws of self-tapping screws. Usually, these products are included with the grid.

Put the mosquito on a flat surface. Make measurements and corresponding marks.

The angular fasteners are mounted in the corners of the frame. Not angular details are fixed in the center of the window frame. During these works, keep the smooth distance between all the details.

Fasteners intended for tops are mounted above the upper corners of the grid, observing the distance of 12 centimeters. Such technology will provide a mosquito sufficient space for the entrance. To fix the fastening elements on the self-tapping screw, the screwdriver is used.

Remove the grid from the plastic window is also easy. For this, you need to take on plastic holders that are in the middle of mosquito. Neat motion lift it up vertically. When the grid comes out of the lower hooks, the bottom is removed back from themselves for several centimeters. Next, do not rush to lower it until the mosquito comes out of the holders from above. In the last stage, place the product into the room.

Various fastenings of mosquito nets and their features

General principles of installing and fixing the mosquito net on an aluminum window are almost similar to previous installation cases. However, still exist some features:

• The grid is started in the frame for the upper guide.
• Having achieved the maximum position from above, boil the bottom edge of the sash behind the lower guide.
• Now you can lower the product.

Usually, even for non-professional, the total installation time of the plastic window design takes no more than 30 minutes.

Standard mesh models on the frame are mounted in a few minutes - with the help of fixing to the window frame with special latches.

Installation of structures with z-shaped fasteners, takes a little longer, within 10-15 minutes. However, the process itself will be more complicated.

For whom it is important to reliable fasteners, we recommend paying attention to metal parts. Such products are not cracking, they are not damaged, and they are not terrible frost and summer heat. In addition, unlike plastic analogs, metal fasteners will not allow the grid to fall out even with hurricane gusts of the wind.

Not so long ago, mosquito nets of the ratio type appeared on the market. Installation of such products without professional assistance is not recommended. But, if you still intend to do it yourself, it is recommended to perform work together. It will help quality work, and will save from the loss of parts.

Installation of anti-arine mesh per door

Today, antitomarine nets on the doors of balconies and veranda are mounted using special magnets, and the use of the clamping mechanism. Before starting work, you need to note the places where the loops will be fixed. Next, they are fixed on the doorway with screws or screws. Next, you need to fix the grid against insects on the hinges, and consolidate it with the help of magnets.

The last step of installation of the mosquito net on the doorway is fixation on the door profile of magnets using self-tapping screws.

Installation of anti-mosquito net on plastic windows

Flies and mosquitoes turn into a real problem in the warm season. The easiest and most convenient way to combat insects in the house is to install mosquito nets on the doors and windows. How to mount a mesh against insects on the window prem, as well as the doors of the terraces and balconies, you will learn below.

Self-mount mosquito net on the window

If your mesh from insects has included z-shaped mounts, you must perform the following sequence of actions:

1. Put the mosquito vertically to, at the same time, the attachments have been facing your face. It is important to take into account that the attachments are often different depending on the length of the hook of this part.
2. Next, set the grid so that the tap of the larger fastener is turned upwards, and smaller down.
3. On the side of the grid there are plastic or metal handles located vertically. Firmly grasp them.
4. Put the mosquito in a specially designated place, to install stacks in the window opening.
5. Raise the grid as high as possible, and make a large hook from above behind the window frame.
6. When the mosquito is in the highest position, get smaller hooks beyond the edges of the window opening below. Lower the grid.

This is the easiest option of mounting the mosquito net. However, it is possible only in the case when all necessary details are available. It is necessary to take into account the fact that this method is not suitable for all types of plastic windows.

Method for fixing the mosquito net in window opening

Another equally popular way to fasten the mosquito net on the windows, as well as on the balconies, with the help of special plastic corners.

Although this option is not suitable for all cases, if you plan to install mosquito on the plastic window, this option must be studied in detail.

In this case, in contrast to the variant with the metal fasteners, where they are installed on the mesh frame, they are fixed directly on the window frame.

The process involves the following sequence of actions.:

• Conduct measurements of the window opening and frame on which the grid against insects is attached;
• On the outer part of the window frame, with a pencil, all the necessary marks are made. At the same time, the calculations need to be done with a slight margin.
• Using screws, lock the corners on the window frame;
• Further actions correspond to the installation stages in the cases described above. Mosquito is fixed in the window opening using the upper and lower hooks.

Install the mosquito net on the door

Unlike products designed for windows, door mosquitoes are divided into two types:

• Those that are in a special building representing the frame;
• Free hanging mosquitoes.

Before you take on the installation of a mosquito net yourself, you need to consider that this type of work is more difficult than installing a mesh on a plastic window. This is due to the fact that when the grid is configured, they are counting on the work of professionals, and man without experience will be difficult to understand. Therefore, work on the installation of the anti-mosquito net for doors is recommended to trust the specialists, it will not only save time and strength, in the event of a marriage, the product will quickly be replaced with a new one.

As an example, you can consider a mosquito with a frame. This type of product is attached with hinges, which resembles ordinary doors. In contrast, mosquito nets on magnets are attached all over the perimeter of the doorway, with the help of special magnetic fasteners.

Sometimes a magnetic latch and handles are included with the mosquito net. In addition, if the height allows, you can install several imposses.

For a professional mosquito netting on the door takes no more than 15 to 30 minutes.

The peculiarity of this type of mosquito nets is twisting during removal from latch or opening. The presence of such a function eliminates the need to twist the product manually and significantly prolongs the life of the product.

You already know how to install an anti-mosquito net on the window or door, what kinds are there. When it comes to the simplest design of the mosquito net, the installation is made independently. Work will take no more than half an hour. However, the installation of complex structures is recommended to trust professionals. Employees of a specialized company easily implement installation in a short time. It will save your nerves, and do not have to worry about the reliability of fixing the design.