We make your own emds from chipboard with a lid. Do it yourself handwritten: master class cover the cuff skin with their own hands

Many people can detect the accumulated number of leather things - it can be old jackets and raincoats, skirts and dresses, bags and shoes. You will not use them anymore, but it's a pity. How to do in this case? What about shelter with a leather cloth with her own hands? The skin is a great material for crafts. With its help, you can bring changes to the interior, decorating old things or creating something new.

Today, it makes a lot of leather various items: Furniture, clothing, accessories and even walls and floors. But in order to create such things you need to have special knowledge and skills. But for the upholstery of Poupe, you will need a couple of old jackets or other clothes. You can also use leather trimming, acquire which will not be difficult in any studio.

We make the petties

To begin with the preparation of the material. For this we need to spread old things. Next, you need to make a cleaning of the resulting pieces and painting various scratches and scratches. After that, use the most ordinary hand cream, lubricate them with pieces and give the cream to absorb.

Let us turn to the creation of a puff base. For this we need:

a piece of plywood;
1 meter of foam rubber;
1 meter of the skin;
electric logsik;
furniture stapler;
drill;
line;
roulette.

Manufacturing process:

We make marking on plywood and divide it on 5 parts. We saw parts using an electrolovka. If you have any errors, then nothing terrible - they can be hidden behind the foam rubber. In order to get a smooth slice, it is necessary to watch not on the saw while working, but on her sight. So that in the future do not get the off-thenore, we recommend armed with an eyebrow and hang all the details. Then they need to collect together. Next, it is necessary to make marking on the parts of plywood, which will be used for the screws and make the opening electrode. Now use a screwdriver to spin the screws. Frame ready.
When the cabinet is collected, you need to proceed to its pasting foam rubber. We put the foundation for the foam rubber, and cut the edge with a knife. The first two sides are ready. We make the remaining three sides a little differently. The rest of the porolon must be cut down in size more than the frame itself. Next, we take glue and glue the foam on the edges of the base.

Go to the cutting case. First you need to measure all sides of the Purphic. After that, it should be started to cut the fabric. Her low part It is necessary to increase by 4 centimeters. It is necessary in order to make bends inside. Let us turn to the poscy of the Purph. To the top it is necessary to sew edges. It must be done on each side. Then you need to connect the sides. Now you can wear a case on the frame.

Skin varieties for trim

Large skin pieces. They need to be sehered among themselves, after which it is based on the basis and kilgle with furniture nails.

Trimming. Pieces stitched with each other in one big clothAnd then the details on the case are cut out of it. From such pieces, you can make a pattern, using squares or diamonds, and you can sew chaotic uneven parts.
Shaggy product. Skin can be chopped in the form of small narrow strips or scales, which are crosslined with each other. After that, they must be sewed on a tissue case, which corresponds to the sizes of the puff. For manufacture, you can apply both skin in one shade and different colors.
Applique. If you want to make something unusual, you can make an application using skin burning. To do this, it is necessary to cut the part of the appropriate size to put it on the pan and warm up. From such actions a piece of skin will begin to bent. Soft skin is strifted when it is heated by its candles. In order to make various patterns, for example, the veins on the leaves, you need to use a hot needle. Before starting to work, you can practice on unnecessary pieces of material.

On the Internet there are a lot of ideas for making the emblems with your own hands. This uses the most various materials. Sometimes they are surprised how people thought up to this? But the person is very clever and invented a huge number of ways to save money.

Puof of plastic bottles with their own hands

And for the first master class, which I want you to show, you will need simple plastic bottles. I was very surprised by this idea, and I liked it to madness. Agree, the bottles of the pond of the pride, the material, can be said, free, why not make an independently comfortable and functional thing.

Among other things, you will need a dense cardboard, tape, sintepon or foam rubber, as well as fabric. Be sure to make the bottle must be one size and volume. Their quantity depends on the size of the future POPIph. You can make a small one, but you can sufficiently fit in order to fit two people. And the more will be the area of \u200b\u200bthe upper surface, the more cargo he can withstand. In terms of strength, I can say that it is quite capable of withstanding up to 75 kg. Again, the cardboard, there is a cardboard, but if you have the opportunity, replace plywood or plastic sheets, then such a doctrine will serve you for years.

Now fold all the bottles together and tie all the scotch. Try to do it smoothly and tight. Next measure the diameter of the workpiece and cut 4 cardboard circles. The bottom and the lid will be double for greater strength. Secure them to the bottle also with the help of sticky tape. The basis is cooking, then you need to cut down the sidewater slices. That is, the side and the upper - the circle. The thicker will be the material, the better. By the way, it can be replaced by foam rubber, but it will come out a little more expensive. With glue glue to the base. Well, then everything depends on your imagination and opportunity.

For example, a cover can be sewed from the fabric, even using small pieces.

Instead, use the skin. It will be then masterpiece.

Decorate with lace, rushes or appliqué.

Fetra Fetal Flowers will make your poof an exclusive thing and will not leave indifferent connoisseurs handmade. Those who like to knit can make a decor of threads.

I think it is worth paying time and seriously dreaming to get such original subject Furniture.

Puffy do it yourself from the tire

Let us now move on to the next master class. It will be a little easier. This will require old tire From under the wheels. Surprised? But do not be afraid, it's not at all country optionalthough it can also be used in summer house.

Here you will need to prepare serious tools:

Screwdriver
Selfless
Termoklay
Varnish and brush
Two round slices of plywood diameter slightly less than wheels (see photo)
And fat rope

First of all, you need to thoroughly wash the bus from dust and dirt, give it a good dry.

Then, with the help of self-tapping and screwdriver, fasten the bottom and sidew. Screw them at a distance of 7-10 centimeters from each other all over the perimeter.

The workpiece is ready! It remains only to properly glue the rope, starting from the middle of the spiral. At the end, cover the product with several layers of varnish. But you can do without it. It turns out very simple and at the same time an unusual pouf from the tire.

Soft pouf - bag do it yourself

Next option - soft puff. It is also called the chair with a bag. It is very popular among children and most often bought in the children's room or on the balcony. It costs at least one and a half thousand. And of course, the price depends on the size. But we know that it can be significantly saved and make such a miracle pouf alone.

For the manufacture, you will need a two-type fabric: x / b (flax) dense and beautiful for cover, thread, needles, sewing machine, filler.

To start, draw paper patterns. It will take 4 side and 2 round (bottom and top). The diameter of the circular parts depends on the size of the upper part of the lateral parts.

Pattern transfer to the fabric and cut down, then sew all parts, including the bottom and the top. It turns out the ball, but do not forget to leave a small hole where the filler can be filled. It is sold in specialized stores for furniture fittings.

Remove the workpiece and pour out the filler there. A needle and thread squeeze the remaining hole. See that the density of the future of Purphif is normal.

Next, it remains to sew a decorative case of a beautiful finishing fabric, which will attach a suitable product. It is also sewn as the basis, according to the same patterns. Here is such beauty it turns out. Yes, they will have to say how to sweat, but it is worth it. So dare!

Pouf do it yourself from the chest

And how do you like the idea of \u200b\u200bcreating a pouf? I like such thing like me. In general, I adore to create and believe that the best thing created by some thing is the best. After all, the man puts the soul and warmth.

Now I will show you how you can make the emblem alone from the chest, wooden box or drawer at home. My version will be reported from the rest of the fact that it can be used not only as a seat for seating, but also as a table.

To begin with, we need to cook necessary materials and tools. If we take the chest as a basis - excellent. It does not require additional processing and decor, unlike a wooden box or drawer. In this case, the foundation must be painted or covered with cloth or skin.

In order to make the pouf we will need:

basis for PUPPI - We have this chest
two plywood sheets based on base cover
morilka
luck transparent
brush and rags
porolon about 4 centimeters wide size with Faner
singry procession on 10 centimeters more than foam on each side
tissue
furniture stapler
nails or screws with a neat hat (furniture)

It is better to cut it sharp knife. I tried scissors, it turned out not exactly. Sut off the syntheps and fabric.

Starting from the middle, furniture stapler Attach syntheps with a tree.

Pay special attention to the corners. If you do in this stage, they hit them, the pouf will look inactively. Slowly pull the syntheps and fold, as shown in the picture.

So it came to the final part of our work on the manufacture of homemade Pupific and, part-time, coffee table.

As I said earlier, we need screws with a beautiful and neat hat, as in the picture. I greatly approached the carnations for door platforms. With the help of them we attach the second piece of plywood with back side Seat.

Now you can install it on our foundation. That's what happened (pouf-chest with your own hands).

Turn over - and we have a table for board games or tea drinking.

All this is done in one evening. Simply and easily. And the main thing is functional, because it can store everything that your soul!

Puffy for home can be made with your own hands even using different materials Both techniques: link with crocheted or knitting needles, sew from undergraded means or even from an old sweater.

In our review are presented interesting master classes how to make pupifs for a hall or hallway and non-standard ideas Use the product in the interior. So, we learn how to create a stylish piece of furniture step by step and what is needed for this.

There are many fillers for manufacture frameless furniture. Each material has its own characteristics and features.

If not suitable synthetic materialsIt is worth choosing natural:

Wood sawdust and waste chips Cedar and pines. The raw material scares the pests, has a therapeutic effect, but it must be changed periodically.
Pooh represents a light filler.
Buckwheat husk Enjoy popular. This filling allows you to create comfortable furniture.

To the advantages Natural fillers should include the absence of harmful chemical components.

Synthetic materials are used as fillers:

Polystyrene foamlooks like small balls. Elastic granules allow you to create an additional volume.
Hollofiber It is an easy filler. It allows you to get upholstered furniture.
Polyurethenian foam is an elastic material that does not provoke allergies.

Tip: Also, the filler can serve - an old blanket, a pillow or a rag

The products filled with balls can be applied on the street, because the material does not absorb moisture. For create objects furniture Apply and remedies. TO original materials You can attribute cereals, legumes, dry grass and wool. Furniture fillers variants a large number

Knitted Square Puffy Spokes

Find out how to perform a knitted emblem with your own hands. Handmade yarn furniture - original solution For interior and soft subject for comfortable pastime. Stylish object Looks like a sample from the store.

To make a soft aspic with your own hands, you need to link six squares from the wool of the same size. Knitting is crocheted. The "SAMPLER" texture and bobble screeds are used. You can see the way knitting on video.

Tip: A similar pouf is suitable as an addition to the tacht, as well as an object for decoring bedrooms and living rooms.

lyon brand yarn, 450 grams, gray - 5 sinks;
needles to create tapestries;
hook for knitting, size 6.5 mm;
filling for puff;
special fibers and foam;
plastic bags.

Step-by-step instruction:

Squares connect with seams. To do this, you will need a double thick thread.
Check the shape of the product can be on the box.
Filling furniture object. For the Fortress, it is worth applying materials such as plastic bags, foam or newspaper.

Tip: To through the knitted pattern, the filler does not penetrate outward, it is recommended to put inside the pillowcase or a soft lining.

After filling, connect the two remaining parties. The product from yarn is ready for use.

Master class from an old sweater

Tell me how to make your own hand from an old sweater. The bottom of the clothing can be applied to design the upper surface of the product. Even when cutting the sleeves, ugly seams do not appear.

Build technology:

Sweater Remove on the wrong side and cut off the collar in a circle.
Holes for hands Sew durable threads.
Then the product turn inside out.
The bottom should be slightly rounded.
Put the special lining from polyester inside the sweaters. Then cut two circles and connect these items.
The product needs to be filled with soft filler.

TOTAL: After stinging a pouf, you should sew a hole. Decorative product It has many applications for home. it perfect solution For home interior design.

Knit crochet bafflish

Rubber configuration pouf can be associated with your own hands. For knitting the product with a diameter of 50 cm, you will need 2-3 tangle Bobbin yarn. Detailed description Presented in the photo below.

But the technique of mating is as follows:

First fit basket or bag
Filled filler
And then the "cover" fit separately and sews to the basis of Purphic

How to sew the pencils bag do it yourself: photos and ideas

An interesting product can be done for your child. Puffy bag owl hands will suit To create a cozy place for leisure.

The soft object of the interior can be made of two pieces of fabric, bean granules fillers and lightning. Like Optionnot suitable for small children, since filler granules can fall out of unbutton lightning. There is a danger that the child is suppressed. If necessary, lightning can be sewn.

IDEA In the fact that we sew as a bag - but we sew opposite corners and get a design as in the photo

Master class: how to sew a fafin fabric

Universal products can be made of fabric. This is an extra seat for seating and resting feet. In this master class you will learn how to make a round ottoman with your own hands.

For manufacture, you will need such components:

1.25 meters of dense woolen fabric;
lightning;
scissors;
measuring tape;
sewing pins;
skin piece;
filler;
sewing machine.

The process of creating the Pufikov

Cut the circle (46 cm), rectangle (length 142 cm, width 40) and square (side 48 cm).
Square cut into two parts.
Sew the lightning to the two sides. Lightning should connect two halves.
Then cut the circle from the square using the ready-made template.

Rectangle fold in half along the short side.
After that, this part needs to be seeded to one circle, and then to another.
From skin strips you can make a handle.
Additionally attached buttons on the leather strap.

As a filler you can take polystyrene beans. Also used foam or polyester. Zipper is recommended to sew a zipper before use. Round Puff Do with your own hands ready to use.

Puffy Banquetage to the footwear

To create a doctrine to the hallway, you will need two boxes and some other materials. This product is not only practical, but also functionally. Inside, you can install the shelves and fold shoes or things.

Supports such components:

two wood drawers;
batting and foam for drapery;
fasteners;
sheet and burlap;
special paint;
wood plank;
wood glue;
instruments;
brush;
stapler.

To make the otfik in the hallway with your own hands, you need to perform such actions:

Boxes glued along the long side.
Planck is attached to the bottom where the rollers can attach.
Then the foam and batting is fixed on the upper surface.
Burlap is stitched with a sheet. Sheet plays the role of lining.
Box covered special paint. Optionally, you can apply the effect effect.
The case is put on top of the boxes.

From the boxes you can do other baffies with your own hands photo shows original options. One option assumes the opening of the box, inside which you can place the shelves for shoes. And on top of attaching soft pillow With filler.

The practical option can be made from one box. First, the box needs to be skilled and paint paint from the tit. The filler is stacked on the phaneer, and the fabric is fired on top.
The material is fixed on the reverse side of the stapler. Z.
Then the plywood is attached to the surface of the box. At the bottom you can attach rollers.

How to make a stool

Solving, what a father-in-law of my own hands can be done, you should try. For creative manipulations, you will need an old stool.

Establish assembly:

Disassemble the chair and remove the seat.
Cut the blanks. Circle in plywood and in paralymp.
With the help of glue, attach the foam rubber to the board.
Top to wear a fur cover, and the ends secure the stapler.
Collect a chair.

It is necessary to give to stand the chair at least a day to frozen glue. Fur need to comb.

Detailed in this article.

Ideas of apparatus

Consider the options for the deputies with Original design. As a filler and frame, there are ordinary items, bottles of tires and rags.

Bottles

Unusual creation option purific do it yourself from plastic bottles . Bottles need to be copped in round form and fix them with ribbon. From the cardboard there is a bottom and top of the product.

Foams are made of foam. They are fixed using Scotch. The case is made from a beautiful cloth. You can see the design of bottles on photo. This item is suitable for living room decoration.

Tires

Interesting models can be made of tires. How to make the emblem depends on the presence of girlfriend and skill. Tires need to be copped with each other. Inside is placed material similar to the foam rubber. Then the holes are closed with thin boards. A soft base is mounted on top and put on the case. For design, it is necessary to use dense tissues.

Puffy for children

To make the emblem with your own hands, you can use the drawings and diagrams. For the manufacture of products, bright and colorful fabrics are used. Try these options:

It is interesting to look a model made of two pieces of material. different color. Single cloth can be used at the bottom.
Wonderful solution - the design of the square shape.
The original composition will be able to use tissues of different colors.
Children will like the emblem as a cone.
On a long otfika, you can even sleep. For its manufacture, you will need flat pillows and a long blanket. Pillows are placed in a cover from fabric and fixed in place.

Fund in the interior with different designs

The choice of the option of the POPIC largely depends on the type of room. For the hallway it is worth choosing framework models with hard base. Cylindrical structures allow you to smooth the indoor angularity. For comfortable holiday In the living room fit models with soft upholstery. To create an accent, it is worth choosing a product from a bright color palette material.

Round puffs - perfect option for self-sized space. Rectangular is recommended to put near the chairs and sofas. The product for the kitchen should be made of moisture-resistant fabrics. For nursery, you need to choose safe, comfortable and soft models.

We hope that our master classes will help you find out in detail how to make the ottoman itself from simple Materials. Homemade products Let's give comfort and comfort to any room. Original seats are suitable for different interiors.

Do it with your own hands in classic style Start S. legs. Two boards with a length of 48 cm and a cross section of 5x5cm is cut at an angle of 45 degrees. They are knocked down by a cross.

The resulting cross is glued with a bar length 35 cm. Additionally, it can be fixed with a self-tapping screw.

One more similar cross is attached from above.

how to make a father-in-law with your own hands. Photo

For seat Take Phaneur with a thickness of 1cm and dimensions of 40x60cm. The foam rubber is placed with a thickness of 10 cm and a layer of synthesis with a margin so that you can be bought.

Singry procession bend and nail to plywood. Then take upholstery fabric And also fasten off the inside.

For decorationpurphifs use decorative nails that are additionally attached to the upholstery.

Do it yourself with your own hands. Master Class

Transverse boards add to the legs. The whole design is treated with a mourn.

Screw the seat to the base with legs. It turns out convenient, made with your own hands, the emblem.

Wheel Pinds with your own hands

To make the ottoman from the wheel, you need to take the wheel desired size and carefully wash it.

pinds made of tires with your own hands. Photo

Of plywood Cut two circles. One on the diameter of the inner part of the tire, and the second on the outer, but so as not to be over the borders of the tire.

For the manufacture of legs take template, drive, and then drink from the board. Four legs are required.

The legs are fixed to the base circle. They are placed with equal intervals and enhance brucki.

The legs are stained and glued to the base, and then fix it additionally with the help of the corners.

A glue is applied to the base and the wheel is applied from above.

The glue is smeared on top and glued the top cover.

The tire is saved ropeusing thermoclause. Rope can use different colors.

At the end, the legs are additionally stained.

Puff Puff Puff

puffy do it yourself step by step. Photo

Will help make the emblem do it yourself step-by-step instruction. Take plywood sheets With dimensions of 45x45 cm and cuts in 45 degrees.

Size plywood with an increase in two or three centimeters of stock cut the vinyl. A soft fabric is put on top of it, you can take a non-follicle, and then closed with a plywood sheet.

Vinyl upholstery bend and fasten the stapler, superfluous cut.

For fastening, use corners. Screws should be less than plywood thickness.

On the surface of the vinyl placed paper with a pattern.

do it yourself with your own hands. Master Class

This drawing is performed by decorative cloves, creating an interesting pattern and fixing further upholstery. The paper is then easily cleaned. The result is a beautiful baffic from plywood with an original pattern.

How to shepherd ash?

Old baffy of plywood can be updated, sew Its new materials. To do this, remove the lower part of the lid.

A new fabric is sliced \u200b\u200btrying on and fixed, hitting the stapler at the corners.

To the top cover again screw the bottom.

Measure the amount of fabric, making a margin.

the cloth located. It is more convenient to do this on the ocher, marking the seams of seams.

Sycultify everything on the ottoman.

Surplus fabric cut off, and connectivity stroke Iron.

Fasten the fabric to the top of the Purphic, wrapping it.

Then wrapped on the inner side of the product.

After that, the fabric stretches at the base and nourishes braces. As a result, new deputies are obtained with their own hands made of old.

Plywood and Fiberboard

From pine bruusribs are made for pouf.

Of DVP Cut squares of the same sizes. The bottom and the seat will be made.

With the help of self-samples going frame Products. The side of it is covered by plywood sheets.

First, the foundation is saved polyurethane. To give the otfika from the fiberboard and plywood is extra softness, it is complemented by syntheps.

While the design enhances, cut out Case. You can take a flock or leatherette.

Details of the case are stitched using durable threads.

The finished cover is put on the pouf.

It is fixed in the bottom with a furniture stapler or pneumatic.

So that the product looks aesthetically, bottoms are ripped fliselin.

Finishing the legs are attached.

Cylindrical otfik do it yourself

Consider the master class to manufacture a cylindrical punch. To do this, cut circles Chipboardthe desired size and brusade details of a certain length.

Circles and timber connect with self-drawing in frame.

On the perimeter on the frame fix the sheet of chipboard, making the wall.

Take foam rubber and syntheps. The latter is needed to level the folds.

The glue for the foam rubber is applied to the frame.

On the seat fasten the layer poroorone Four centimeters thick. Then the whole design is tightened Sintepunion.

Made a case from a suitable material.

The case is worn and fixed from below the stapler or nails.

On the bottom side of the feet of the legs.

Make a cylindrical aspic do it yourself is not difficult if you follow the instructions.

Pinds with storage box

To make the emblems with your own hands with a storage box, you need to follow the instructions. First prepared the material: cut out two blanks from Chipboard With sizes of 37x40 cm and 37x37 cm, as well as one square 40x40 cm.

Of bruus4x4cm sections are cut out four parts with a length of 37cm.

From the resulting fragments are collected ku, whose height is 37cm.

In inner corners Warm glue fasten the timber. FROM outside The angles are fixed with self-drawers or metal corners.

The glue is applied to the bottom and the bar. Printed the bottom and leave to dry.

After drying, the bottom is fixed with self-draws.

To do Cover, Four locking bars are fixed to the square sheet so that the lid is fixed in the drawer.

It remains to hide the cover soft material. For this use foam rubber, batting, syntheps, as well as upholstery fabric.

Fluffy

Make such a product will help the master class on the manufacture of Purphic. For him, four finished furniture legs and a circle of plywood or natural wood.

In the size of the circle cut out foam And then closed it with syntheps. Surplus material is cut off, and the main is fixed on the wrong one.

For fastening the legs, four holes drill. They screw the legs and finished emblems can be used. But so that it looks more attractive from the bottom from the tissue with a circle with a leg holes. It is put on the base and fasten with furniture cloves.

How to sew a soft aspic?

To sew a soft baffik need to act in stages. First, the internal case is manufactured in which it will be filler. For this, there are two circles from dense tissue. Their diameter should be approximately half the meter. If you need a square emblem, then two squares. It will be the top and bottom of the product.

Then cut the strip with a length equal circumference or perimeter, and width - the height of the pouf. Be sure to consider the allowances for seams.

The resulting strip is sewn with an inside. First sew to the bottom, and then to the top of the punch. The finished cover turns, stuff suitable material And the hole is sewn.

Puffy remains decorate. To do this, a decorative case is sewn. The procedure for action is the same as indicated above. Only in the middle part are not sewn, but insert zipper into it, sew the velcro or buttons. Fabric for a decorative case can be used completely any.

Puffy from plastic bottles do it yourself

Consider how to make a puff from bottles with your own hands. Two large plastic bottles are taken. They are cut and combined two parts to get the item of the desired height.

Details how to make a puff from bottles with your own hands, you can see in the photo.

For the base and seats take circles from Chipboard. On one fix the plastic base, and the second is fixed from above.

Puffy plastic pipes do it yourself

Consider the master class on the manufacture of PUPPIC plumbing pipes.

First pipe cut On the slices of about thirty centimeters. It will take about nine pieces of such segments.

Collapse Pipe acrylic paint Golden color. It is necessary to paint in several layers. Each layer is given to dry about twenty minutes before applying a new one.

From above painted surfaces proceed Protective varnish. This gives resistance to water.

Pipes fasten with adhesive gun. The glue will be captured quickly, so it is necessary to do everything too without delay.

Polyurethane matsfor the bathroom folded in half and they make rubers on perforations. The length of the cuts is about five centimeters.

The mat fold and turns out a kind of bud.

Such rolls with buds are inserted into the pipes. They should be tight. In this case, the additional fastening will not need.

The result is an original ottoman, which will be perfectly looking in the bathroom.

Pinds of plastic bottles. Step-by-step instruction

Consider the master class, how to make a pen of bottles with your own hands.

First bottles connect Using the tape into the round item.

Of cardonsufficient density and thickness cut circles the desired diameter. It will be the seat and the bottom of the puff.

Bottles are connected with tape cards.

The surface of the resulting frame closes sintepunion or foam rubber.

There are two circles and a rectangle from the fabric. Partially covered with a typewriter, then put on the design and die.

From the yarn with a pile, the top and sides are knitted, and the fabric uses for nise.

All parts of the decorative cover are manually connected.

Online http://www.pro100m2.ru/archives/646. The pen is offered - a box of chipboard.

The work begins with the manufacture of four (per caustic) of identical rectangular chicks of chipboard. Bruks form rigidity ribs.
Billets from chipboard are glued to bars. You can fasten them with screws for a larger fortress.

The bottom is exactly stuck and the bottomscho is screwed.

The next step is to make a seat, which is simultaneously lid for the inner cavity of the POPI.

Sitting sizes are the same as the bottom of the bottom. In order for the seat does not move from Purph, we glue and screw the stops from small pieces of bar. They will hold the lid on the spot.

From the edge, gluing the stops, it is necessary to retreat slightly more chipboard thickness. The stops should not have an internal bars when equipped covers.
Lid laying a foam rubber.

The whole design is covered with material. Bottom fabric is nailed with a steppeler.