Stand for wine from wood drawings. How to make a wine shelf with your own hands: Materials, original ideas, photos. Mastery Small shelf themselves

Ordinary cabinet or household refrigerator will not fit. Although many people who are uninitiated in the subtleties of storage and tasting elite varieties of alcohol, believe that one or two bottles are quite capable of spending some time in unsuitable conditions, not particularly losing in quality, with such an opinion it is difficult to agree. Of course, in a short time spent next door with other products, the wine will not deteriorate completely, however, it will not be positively on his taste: a properly saved drink reveals a bouquet fully, forms a thinner and complex taste and eventually delivers more fun. If you treat this issue dismissively, then even the drink of the highest category will quickly turn into anything not noticeable and not memorable, its potential will not be implemented.

At the same time, the more the number of true connoisseurs of wine is becoming more, the greater popularity among them is conquer special equipment and furniture, whose main purpose is to preserve this noble drink. Such accessories help ensure proper storage conditions and greatly facilitate this process. In addition, correctly chosen or racks, most likely become the original decoration for the kitchen or any other room where you decide to place them. Harmoniously imagined in the interior of the technician with time becomes its mandatory part, without which it will be difficult to present the relevant room in the future.

Special attention deserves situations when it is necessary to organize a place to keep a relatively small amount of wine. The arrangement of the wine cellar or even the purchase of a specialized wine cabinet in this case will be superfluous - they, for the most part, will be stuffed. For small wine collections, high-quality wine shelves are better fit. And, although individual wine connoisseurs prefer to buy ready-made manufacturers, the idea of \u200b\u200bmanufacturing wine shelves is no less popular with their own hands. This method has a considerable amount of advantages: first of all, its own manufacturer is much more profitable to purchase the finished product. Also, when buying wine shelves in the store you will have a choice only from the models presented in the assortment, collecting it yourself, you are free to decide what appearance will have the accessory you create.

Make wine shelves do it yourself

Many refuse the idea of \u200b\u200bmaking shelves to store wine with their own hands, fearing that it is necessary to work with such a complex, as they consider, the subject of furniture will require narrow-professional skills and special tools. This reasoning is true only in part: to collect the most simple shelves from the boards, you will not need any rare skills. Of course, the greater experience in working with a tree behind the shoulders from the master, the more complex and the original regiment will come out of his hands, but simpler options can be easily able to do tools in hand.

At the same time, the tools themselves will need the most ordinary, which can, perhaps find in any house. Among them are measuring and control devices, such as building level and roulette, drill or screwdriver, saw, electrolovka, as well as plans and sandpaper. This standard set is enough to make a simple wine rack or a shelf with their own hands, which will not give up to store samples, and in something will surpass them.

Also in the manufacture of shelves, with their own hands, it is necessary to take into account where it will be placed, and the matter here is not only in the harmony of the appearance of the shelves with the overall design of the room. Thus, in the kitchen it is unlikely to be to fit too cumbersome accessory, but in this case there are many extraordinary options for the execution of the shelf and its placement. It will be reasonable to arrange a place to store wine next to the tabletop, for example, directly under it to reach it, without moving away from this place - it will be useful when cooking, when all the ingredients must be at hand. If the kitchen interior does not interfere with the more free placement of the rack, then the shelf located in appearance will become a wonderful decoration of the room.

Another situation - you do not plan to keep the shelf in any one place, and you are going to carry it out of one room to another. In this case, you can make something like a basket for wine bottles. It will be kept in it no worse than in standard shelves, but at the same time such a set will not deliver problems during transportation, and it will look much more attractive and unusual. By installing several similar baskets in the kitchen or in the living room, you will give the interior of the placement of originality and emphasize its advantages using the selected design.

In the event that an elegant appearance plays a non-dominant role, and the task is first prior to you - to bring order in the storage of wines and quickly make it yourself a simple shelf for wine, you can prepare a place to store drinks from all of one board installed vertically or tilt to Wall. In such a basis, the grooves for bottles are cut down - right in the center, in the form of round holes, or from above, in the form of naughty. Such an accessory is suitable for storing and a small amount of wine, and a more voluminous collection, such a regiment, without occupying a lot of space, will help not get confused in different varieties of drink and keep his unique taste.

For the storage of wine, it is not for the shelves alone - you will also need air conditioning to maintain the desired temperature and humidity in the repository. When ordering on our website, together with the shelving system, you will receive a guaranteed discount of 5% on the selected climate system and be sure that your drinks will always be stored in suitable conditions.

All well-known properties are known. natural wine. A glass of good, weathered drink not only raises the mood, but also serves as a source of vitamins and natural antioxidants.

Not bad to have at home several bottles For various occasions - dry lightweight canteens or saturated wines, sweet sherry or fragrant vermouth.

Keep bottles with wine best on special racks or shelves, horizontal position.

Shelves for storing bottles with wine can be made from any materials. The main requirements for the materials - they should be strong enough and have an expressive, decorative appearance.

The most common material for the manufacture of wine shelves - natural tree. The simplest and very stylish shelves can be easily manufactured with their own hands.

Wooden shelf

The presented joinery consists from several square modules. The number of modules and their location can be changed during the manufacturing process.

In order to make one such a modular element will be needed. next tool and materials:

wooden or plywood boards 15 - 20 mm thick, about 25 cm width;
screws on wood with a countersunk head 35x2.5 and nails 30-40 mm;
handsman on a tree joiner;
facial Rubbank;
rasp;
chisel with the width of the working part 10 - 15 mm;
electropolitanzik, electric drill with a drill on a tree with a diameter of 2 mm;
grinding paper, with the graininess of P150 - P180;
malyan Scotch;
carbon black;
lacquer furniture, brush;
a hammer.

Manufacture and assembly

Manufacture It is performed in that order:

The manufactured module can be used individually, and you can make them several and connect with each other screws from the inside.

Hats screws When twisting, you can slightly drown into the tree and disguise the putty appropriate color. In this case, the places of the shit must be additionally covered with a layer of varnish.

Note! Before sawing, creep the places of future cuts with painting scotch. This will prevent the formation of coarse chips when sawing plywood and boards across the fibers.

Country Style Shelf

Original shelf for wine bottles country style It may turn out if you can find several railway crutches.

For work need:

even number crutches;
truck boards thick about 25 - 30 mm, You can with small cracks and uneven ends. The length of the board may be different - it all depends on the number of bottles, which are supposed to be placed. Best suitable boards of coniferous breeds - pines, cedar;
glue, most suitable - epoxy, transparent;
corporal machine (Bulgarian) with cutting disc on metal;
drill with a forstner drill or "pen" with a diameter of 14 mm;
fire or Raspille;
metallic pile brush.

Stages of manufacture

Manufacturing shelves in the style of country produced in the following order:

Crucifice boards thoroughly treat metal brush along the fibersTo get a textured wavy surface. Pre-board can be burned with a gas burner. With such a processing, softer fibers will be removed with a brush, and more solid, "winter" will remain. The board will look aged;
Drill holes for crutches, give them a rectangular form with a file or rashpyl;
Cut the grien part of each crutch about 3 cm;
Abundantly apply the glue on the inner surface of the nests and crutches, insert them into the nests and fix the epoxy resin to frozen;
Cover the product varnish. Shelf is ready. It can be hung on the wall, strengthening on the reverse side of the canopy.

To cook mastic take beeswax And in the water bath, heat it with the addition of a small number of turbidar. Apply a liquid hot composition on a tree, in 5-7 minutes Remove surplus rag. Through 3-4 hours Polish the surface with a soft cloth or hairbrush.

Various options for manufacturing shelves for wine are represented in this video:

If you are a healer of European cuisine, then it should be love to pamper yourself a glass of expensive wine for the meal. This drink gained popularity and does not give a leading position. Such a noble product requires a special approach to storage. True connoisseurs collect collections from rare and valuable instances. If you decide to acquire such, you should get closer to familiarize yourself with how the wine regiment is made with your own hands. The description of the work stages will be presented below. Making designs of this purpose you can easily.

If the kitchen room is limited and has little free space, you can get a vertical floor shelf to the ceiling. To work, it will be necessary to make only a few holes in the sheets of plywood and bore them with each other. This design can be used as partition for the separation of space. If you paint the inner surface of the product, then the shelf will become a fashionable and stylish detail of the interior. But you can buy a shelf and in the store, but some homemade masters prefer to make such designs on their own. Among other things, when you hold work, you can use infirred materials and tools. Thus, the design will cost almost free.

Preparation of instruments

If you need a wine shelf, prepare the following tools:

electric jigsaw;
shlifmashin;
pencil;
roulette;
building level;
screwdriver;
drill;
circular or manual saw.

Preparation of materials

In a construction store, you can purchase a dowel, drills for traffic jams, self-tapping screws, wooden pallet, as well as sandpaper. The latter will need for surface treatment.

Technology of work

If you are running the shelf for wine, then the old pallet may lie down in its foundation. To do this, with the help of a circular saw, it must be cut, separate part of the structure for the manufacture of the shelf. Its height should approximately be 50 cm. The next step will be the preparation of boards for the base. With the help of a nail and hammer, you need to tear two boards, while the main thing is not to break them. Three small bar should be prepared to perform separation and fixation of the bottom. Bruks are cut by electric or manual jigsaw, and the length of the billets should be somewhat larger than the width of the pallet boards. They must go a little for the base.

Grinding and working with holes

The wine shelf should look attractive, so the bars and boards need to be seized. This will save products from burrs and irregularities. At the same time, the emery paper should be used, the grit that can vary in the range from 120 to 200. You can also apply grinding machines. On one of the boards should be done by the holes for glasses. Pallets, as a rule, have 100 cm wide. The holes must be standard, but they can be performed in such a way that they exactly match the sizes of your glasses. With standard sizes of dishes, one hole should be outlawed, retreating from the edge of the board 11.5 cm. After one more holes should be placed, retreating 10 cm. From the edge of the board, there should be a distance from 4 to 4.5 cm in width. Similar marks must be performed on the other side.

The wine shelf must have holes that are done using a drill or drilling machine. From the edge of the drilled holes to the edge of the board, make a markup, cutting off unnecessary. The resulting angles are processed by emery paper.

Conducting an assembly

Shelves under wine can be made of different materials, but the cheapest will become the wood. If you used the pallets, then after all of the above stages, it is necessary to collect the bottom of the shelves. The length will be located glasses. Parts of the bottom must be fixed by self-drawing, pre-in these places should be done by a drill hole. After the bottom can be collected, it should be strengthened to the ground. At the same stage, everything must be fixed with self-drawers, having previously done the holes for them. At the same time, the possibility of splitting the board should be eliminated, otherwise you will have to look for her replacement.

After assembly, the product should be cleaned with sandpaper and coat with a mourn. As soon as the shelves under wine are made, they can be suspended on the wall. To do this, use with which points are scheduled on the wall. At the marks received, you should do the holes of the drill, and after insert the dowels in them. In the latter, screws are screwed up with a length of 2.5 cm. Hats should not be tightly spinning, because the shelf will be removable.

Alternative shelves

Shelves for wine with their own hands can be performed on more simple technologies. For example, a wine closet can be made of a wooden box. It is installed on the steel legs, and the holes for bottles should be done in the bottom. Between the rows there is a shelf that will separate the bottles among themselves. The simplest solution is a wooden board that is strengthened to the wall horizontally. You can perform holes in it using a special drill. The main subtlety lies in the fact that the holes for the neck must be drilled at an angle, with the circumference should be the same. The wooden bar is cleaned, if desired, painted and treated with varnish.

You can independently make the manufacturer of the wine shelf, the simplest options can be used to use water pipes, or rather what remains from repairing the bathroom. Using the tubes adapters are connected to a zigzag structure. In order for the bottles not rolled over the surface, the pipes should be bent at a certain angle.

Conclusion

You can save space using a wine bar to be located under the table. To do this, you can use reinforcement rods that bend in the form of hooks.

A glass of good wine during the meal is capable not only to raise the mood, but also saturate the body with useful substances, vitamins and antioxidants. If you are a fan of European cuisine, then you must fully agree with this statement. But any product or drink can save your useful properties only subject to storage rules. Meat - only in the freezer, eggs in special trays, vegetables in the lower compartment of the refrigerator. Exactly the same "special" conditions will require wine.

Wardrobe built-in kitchen furniture

It is recommended to use shelves for wine bottles. The designed not only to fulfill their primary purposes - the preservation of a noble drink - they allow you to make a certain "highlight" in the interior of the house or apartment.

The cost of this type of furniture is far from the level of chairs and stools. It is rather a kind of type of art, so be prepared to lay out a round sum for a quality product, or consider the creation of such an element of furniture with your own hands.

Statistics can not lie, saying that more than 91% of all purchased wine bottles is drunk in the first 24 hours. But the real connoisseur of wine knows that the whole "life" of this amazing drink is a long, complex process, personifying since ancient times a whole science, which to this day continues to develop and improve.

Direct sunny rays, vibrations, humidity, temperatures are the main factors fully deprived of their hobby a newly sommelier, which is the main cause of the storage of vessels with this drink in a special cellar, where the temperature is constant, and the absence of sunlight completely eliminates the oxidation process.

Special wardrobe for home storage wine in the desired temperature mode

Storage racks for homemade wine in the basement of the house

Absolutely lucky owners of a country house that can afford to equip a real wine cellar, where it is possible to enjoy the gifts of Dionysus, sitting in the evening before the fireplace. But what to do a person who, being a connoisseur of "wine art", is forced to live in an apartment, where to distinguish the place for a specialized storage hardly possible?

A similar question was asked in the end of 1976, the French founder of the Eurocaave company, producing a wine rack, specialized cabinets, allowing to maintain the quality of a noble drink even in urban conditions. But this applies, rather, to the cabinets.

The wine regiment is equipment for several other purposes. Therefore, returning to the beginning of the article, it is necessary to fully determine the purpose of buying a rack. Would you like wine to do with the kitchen? Then your choice is a wardrobe for storage. You need a beautiful decor element or just a shelf for storing bottles, where the next Celebration of a couple of other red semi-sweet is expected - make a wine regiment!

Original wine shelf for wine bottles for your guests

Types of wine shelves

They are separated by the type of design, as well as the placement of wine bottles.

Comfortable wine wardrobe with drawers

Combined wine shelf for horizontal and vertical storage

But the edge of fashion trends, the cruel "invasion" of trends dictates the consumer absolutely new, unimaginable, and in some places there are really grand designs! By and large, such furniture is selected on the basis of the design of the room, where its further accommodation is planned. And the folk crafts or creative personalities do such shelves with their own hands, putting the soul in them, turning the element of the interior rather into the museum exhibit than the furniture.

Wine rack in the kitchen for a small collection

What does the market offer for us?

Style Styles "Industrial". Sly plexus wood with metal form structures, slightly close to Steam Punk.
Mini bar, Stand for bottles of wine and glasses in Loft style Industrial
Floor racks type "Tree" (when the bottles are growing from the trunk).
Successfully fit in this interior Wine rack made from PotteryBarn
Standard shelf racks based on ingenious designer solutions. (Waves, squares, circles, triangles).
Unusual Design Bottle Storage Solution
Classic wooden floor, wall-mounted, slightly stylized cells.
An interesting idea for creating a wooden bottle rack with your own hands
Single or multiple shelves located in a special order on the wall.
Wine shelves - Unusual decoration on the wall of the kitchen

The list can be continued, taking into account the flight of the designer's fancy.

Wine racks - Unusual interior solutions

Disadvantages and advantages of wine shelves

Little decorative wine shelf handmade

As already mentioned, the main disadvantage of this type of repository is its absolute inability to keep alcoholic beverages, observing all the basic rules. Here the wine will never sound correctly, and only temporarily persist to the nearest visit visit. Or play the role of a beautiful decorative element of the interior, harmoniously complementing its integrity, which is the main advantage, without taking into account the simplicity of access to any bottle.

The mini-bar in the living room allows you to properly and beautifully store your favorite drinks.

The minus of the wine shelf is, alas, not a cellar, where you can go on a special occasion, conducting excursions for guests, going through all the pearls of your collection, as is customary to show in films.

Wine collection is perfectly located on small stands, located on one of the walls.

How to choose a rack?

Gorgeous bar in the living room, allowing you to make cocktails for every taste

The only correct decision, the Council, the recommendations are not here and can not. Wine storage supports are chosen exclusively on the basis of personal preferences. Like when metal is combined with a tree or stone? Or perhaps plastic design from the discharge of Hi-Tech? Want to put an outdoor rack in the kitchen or honeycomb?

Wine rack of an unusual shape located on a kitchen wall

What is really worth paying attention to when buying this decor element is the manufacturer brand, the quality of the materials used, the construction assembly. Nobody will not be pleasant to look at the steady, creaking rack, bringing instead of aesthetic pleasure, only irritation and hatred of the "Chinese fake." Or maybe the best option will be the creation of a wine regiment with your own hands?

The original wooden station for bottles of wine is easily placed under the stairs and adds a highlight in the interior

Video: Shelf for wine with their own hands

In real connoisseurs of European cuisine, no meal do without a walled wine gland. This drink has long won rafting popularity and still does not pass the leading position. Such a noble product requires a special approach to its storage. Many true connoisseurs collect very valuable and rare specimens in collections.

Today we will get acquainted with 13 stunning DIY ideas for the design of wine wardrobes at home.

Built-in cabinets

Obviously, one of the most convenient and attractive ways to store your wine collection will be the integration of special racks in the ready-made space. So you do not have to look for an extra room in your kitchen. The portal interiors of the room offers to equip the shelves a regular servant for dishes. Thus, in one half you can store drinks, and in another sets of glasses and appliances.

Another option equipped in a kitchen headset. All you need is to equip one of the modules with special compartments and grille, as designers from Live Laugh Decorate made.

The next DIY project will like the fact that the area of \u200b\u200bthe kitchen is so limited that it seems impossible to allocate at least a little free space. You can get a small vertical shelf. It is very narrow and therefore will not take too much space, and you vary the height for yourself. If you wish, you can make it from the floor itself to the ceiling.

Stunning version of the wine rack. All you need is to do several round holes in plywood sheets and make them together. Such a shelf can be used as a partition for the separation of space. If you paint the inside into an unusual color, it will become a stylish and fashionable detail of the interior.

Wall racks

Not everyone was lucky enough to have an extra room for the built-in wine shelf. However, everyone will definitely find a free wall. So why not use empty space under a minibar? This project from Shanty 2 Chic is embodied with the help of several pieces of wood and large hex screws. Lightweight and marked stickers with names give the shelf with an elegant appearance, turning it into an old eye.

An unusual option is offered by designers Hart's Desire photography. Such a wooden shelf allows you to store a drink at an angle of 45 degrees. It looks a bit dangerous, but in fact, the design is very reliable!

If you all prefer versatility and multifunctionality, then the project from The Kurtz Corner is what you need! Attaching special threaded trays to the usual suspended box, you will cope with two tasks. It will be a shelf for storing wine and glasses.

Our next idea is borrowed from Erin's Lane / Etsy. Everything is extremely simple: only a massive wooden board and several cast iron bolts from the railway are needed. We combine all this, and in your house there is a wine shelf in a rustic style! Fast, but very stylish DIY project.

Pipe

The idea may seem strange, but the wine bottle perfectly repeats the cylindrical shape. So why climb the space by a million shelves and tripods when the wine can be placed in the saving space of the suitable size? For example, equip the cellar with a wall of cylindrical building blocks. Now they can be purchased at any economic store. In the terracotta clay pipe, the perfect microclimate for storing a gentle and capricious drink is created.

Turn the wine shelf into a real work of art! Budget alternative to brick blocks, there will be strong pipes from PVC. Create an amazing composition of different diameter elements, as the Adventures in Creating designers made.

Drainage pipes are also perfect for storing favorite wines. The main thing is to firmly clean them among themselves, then your drinks will be in complete safety. Also, Adventures of An Almost 40 Year Old Intern offers to equip at the top of the design of the coffee table. By this you create an additional surface for the location of things or accessories.

If you are looking for the most simple and economical option, then nothing is better than the regiment from postal cardboard pipes, you do not find. Agree, this project from Bob Vila looks very original and worthy of attention!

Case stand

Our last DIY project is a real work of art! The handmade shelf from Danmade for HgTV is made of a solid piece of natural wood and stakes. It remains only to find a suitable place for such a stunning accessory.

Another original idea

And so, now you have in stock there are integer 13 ideas for wine storage equipment. If you have your own original ideas, do not forget to share them in the comments!

Categories:
Places:.