What is quartz vinyl tile. Quartz vinyl tile: reviews, the whole truth, technical characteristics and advantages. Installation instructions for quartz vinyl flooring

Quartz vinyl tiles are not as common among consumers. However, it has many positive features and is a kind of polyvinyl chloride coating with the addition of quartz sand. Among the ingredients, the latter is contained in a volume ranging from 60 to 80%. This material is the second hardest.

Vinyl with additives is contained in the volume from 20 to 40%. If you still have not decided whether to purchase this material for decoration, then you should familiarize yourself with its technical characteristics, advantages and read reviews of real consumers.

The Truth About PVC and Quartz Coating

Before buying this or that finishing material, you need to read the reviews. The whole truth about quartz vinyl tiles presented in the article will allow you to form an objective opinion about this cladding. It has increased fire safety and high strength, almost does not support combustion and is non-flammable.

The tile during operation is not covered with scratches, does not wear out, which is provided by a protective layer of polyurethane. You can use the coating during wet conditions, because it is not afraid of exposure to water and has anti-slip characteristics. Surface texture can be smooth or embossed.

The tile has antibacterial and antiseptic properties. This coating is perfect for a sales area, because it is highly resistant to stress. Such a wide variety of advantages has determined the area of using the coating in the premises, not only for domestic, but also for commercial purposes.

Characteristics in terms of structure

The consumer will be helped to find out the whole truth about the quartz vinyl tile reviews. You, too, can follow the example of the buyers and read the opinions of the buyers. However, before purchasing, it is also important to pay attention to the structure. This material is multilayer and consists of PVC with fiberglass reinforcement and a base layer of polyvinyl chloride.

The decorative layer can imitate any texture, and quartz is added to the main one. For an anti-slip effect, the surface is covered with a protective substance. Layering does not mean that the material should turn out to be thick. Quartz vinyl tiles can be limited by the following parameters: from 1.6 to 4 mm. However, the coating remains very durable.

Characteristics in terms of installation methods

The tiles can be installed with glue, they can have a lock joint or a self-adhesive inner surface. In the latter case, the glue has already been applied to the wrong side and covered with a film that will need to be removed during installation.

Main advantages

It is not a coincidence that the demand for quartz vinyl tiles is growing relentlessly. This is because the material has numerous advantages. Among others, a high degree of wear resistance and strength should be highlighted. The minimum service life of such a coating is approximately 15 years. It will be longer, but in this case we are talking about a hassle-free service. The material is resistant to external influences, it does not fade over time, even if the operation is carried out under the influence sun rays.

The coating is heat and moisture resistant, easy to clean and easy to install. You can replace individual parts if necessary, and in fact many other coatings are deprived of this. When using cladding in the bathroom, it is possible to create a high degree of comfort, because the floor is very warm. Having visited the store, you can choose the texture, shape, color, and also the method of fixing the tiles, which opens up many possibilities for designers. At the same time, the cost remains adequate.

Main disadvantages

You can not consider the finishing material only from the point of view of positive features. It is imperative to take into account also the disadvantages. The latter include an impressive weight. flooring, which is determined by the presence of quartz rocks and a complex composition.

If you also wondered what the disadvantages of quartz vinyl tiles are, then you should also take into account the need to create a perfectly flat surface before laying the material. It is flexible, so dimples and raised areas will remain visible and felt if the floors are not leveled.

Benefits of Belgian MODULEO tiles. Reviews

The whole truth about Moduleo quartz vinyl tiles, reviews of which will be presented below, will allow you to understand whether it is worth purchasing such a coating. Many consumers believe that this cladding, which is called vinyl laminate by the manufacturer, is of excellent quality and is also good because it is offered for sale in a variety of standard sizes.

Tiles are quite often compared by consumers with their counterparts. However, the Belgian flooring is available in block and elongated versions. The material is the embodiment High Quality vinyl coverings. Products have a multilayer structure, and they are based on high-strength polyvinyl chloride with a protective polyurethane layer. The thickness is 4.5 mm.

Consumers love that tiles have the look natural material, it is warm to the touch and soft. Castle quartz vinyl tiles, reviews and the whole truth about which help consumers to make right choice, can be installed without special knowledge and skills. In this case, no special glue is required. Installation can be done by yourself. In each package of laminate you can find instructions, which will simplify the work. At the same time, the requirements for the base of the floors are minimal.

As one of the main advantages of tiles, consumers highlight moisture resistance. All this is excellently combined with resistance to sunlight and damage. After reading the whole truth about quartz vinyl tiles, you probably want to buy them, because they are made with an emphasis on natural natural appearance wood and is performed in warm colors... Vinyl floors are environmentally friendly. Even with careless handling, scratches will not occur on the surface, so you can lay such a coating in kitchens, bathrooms and children's rooms. Tiles can be a great choice to give your home a completely different flavor.

Specifications: composition description

Quartz vinyl tiles, reviews and advice about which should help you make the right choice, consists of several layers. The bottom one is vinyl. It provides reliable adhesion of the floor covering to the subfloor. Next comes a layer of fiberglass, which not only reinforces but also forms the vinyl. The quartz vinyl interlayer provides strength with the required flexibility. This layer is also needed for heat and sound insulation.

The top layer is decorative, it is he who is responsible for the shade, texture and pattern. The quartz vinyl PVC floor tiles, the customer reviews of which you could read above, have polyurethane protection. It strengthens the decorative layer and prolongs the life of the product.

Technical characteristics in terms of wear resistance

In order for the finishing material to last as long as possible, it should be selected taking into account the wear resistance class. The grade is determined by the thickness of the last polyurethane layer. Several varieties are known today. If the wear resistance is in the range from 23 to 31, then such a material is suitable for household use... The tiles can be installed in areas of low traffic. The protective coating in such a finish is very thin; it does not guarantee a long service life, which does not exceed 5 years.

Quartz vinyl tile, real reviews which are presented above and must be read by you before going to the store, may refer to the 33-42 classes of wear resistance. If you saw such a material, then before you is a commercial grade coating, which is more durable and is suitable for rooms with medium traffic.

If the material belongs to the 43rd grade of wear resistance, then the elements have a thick layer of polyurethane, which provides ultimate strength and durability. Such tiles can even be used in garages, where correct installation will be able to serve for about 40 years. The experts' comments on this class of tiles are unambiguous, they are expressed in the fact that the coating will show its best qualities under high loads.

Finally

Quartz vinyl tiles, reviews and the whole truth about which are presented in the article, has many important characteristics for flooring, among them should be highlighted: flexibility, strength, as well as practicality. The manufacturer managed to achieve all these qualities thanks to special technology, which involves the use of pressure in production. Due to this, the tile remains plastic, but does not crack or burst under the influence of gravity.

Before making a choice, be sure to read the whole truth about the product. Quartz vinyl tiles, reviews of which were presented above, are offered for sale in a variety of options, textures and colors. All this allows the consumer to choose a coating that can be used in premises for various purposes.

More than 12 years ago on Russian market a new product for the domestic buyer has appeared - vinyl tiles LVT (luxury vinyl tiles). Major manufacturers such as Tarkett, Berry Alloc and others have offered finishing material, which successfully competes with rolled PVC linoleum, laminate, porcelain stoneware and even parquet board... The next step in the development of this direction was the so-called quartz-vinyl floor tiles - indeed unique solution for decorating a home, office, shop or industrial premises.

Quartz Vinyl Tiles is a multi-layer floor covering, flexible and resilient. It is produced by thermal pressing from PVC, fine quartz sand and some other components. The structure resembles heterogeneous linoleum with the difference that the calender (high-density) thermoplastic base is mixed with a filler, which not only increases the weight of the product, but also serves to:

Structurally quartz vinyl floor tiles are composed of:

1 and 2 - polyurethane protective coating (transparent). This is a transparent high-strength PVC, which is often supplemented with various protective layers, which provide increased resistance to abrasion, lightfastness, bacteriostaticity, etc. It can create a special decorative "volumetric" effect due to the so-called structural embossing "in register".
3 and 4 - a decorative layer of vinyl chloride with a thermal printed pattern. Imitates different breeds wood, stone, cork and other materials.
5 - interlayers of fiberglass, providing stability of the product and additional protection of the base.
6 - base layer, which takes on mechanical loads. Consists of 70% silica sand mixed with thermoplastic polymer.
7 - reinforcing fiberglass.
8 - stabilizing layer.

The closest analogue of quartz-vinyl is vinyl tiles, in which the base does not contain a quartz component, but is made of calender vinyl chloride.

Both types are manufactured in 32-34 and 41-43 wear resistance classes and are used in:

Living areas including bedrooms, nurseries, living rooms, corridors, kitchens;
Office, commercial and commercial, public buildings;
Industrial, sports and other facilities with an extremely high degree of stress.

It is impossible not to mention one more feature of floor tiles. Since the thickness of the product varies from 2.3 to 6 mm, the width is from 10 to 40 cm, and the length can reach 1.5 m, the products are produced in several variations to facilitate installation:

Adhesive quartz-vinyl to be fixed with dispersion adhesives for heavy polymer coatings.

Self-adhesive quartz vinyl products... There are two types:

Products supplied around the perimeter classic lock connection"Thorn-groove" (like a laminate) or modernized. Planks or tiles are joined without the use of glue mixtures, if necessary, they can be easily disassembled and reassembled. Because of this property, as well as the similarity of the profile of the locks, the presence of a V- or U-shaped chamfer, this tile is often called vinyl laminate.

Advantages and disadvantages

Combined PVC flooring has incorporated all the advantages of linoleum and modular flooring. The advantages of quality products from reputable manufacturers:

Are Chinese or Taiwanese quartz vinyl flooring harmful to health? This question cannot be answered unambiguously, but you can ask sellers to provide sanitary and hygienic certificates. Russian sample... Or believe your own feelings - the planks should not have a strong chemical odor, a heterogeneous structure with foreign inclusions, various defects (unpainted areas, black dots, dents, etc.).

Of the cons of the composite floor material note:

The high price of the product.
Substantial weight. 1 m² of vinyl tiles weighs about 3.5 kg, and quartz-vinyl tiles weigh 7 kg or more.
Over time, shrinkage of the material appears, which is expressed in the formation of gaps between the floor elements.

Laying tiles

Installation work requires the craftsmen to know the basics, that is, the rules for layout, marking and selection of optimal compositions. Detailed instructions are printed on each package of quartz vinyl, so a beginner can handle the installation. Prepare the following set:

Floor material with a margin of at least 1 sq. m.
Adhesive for heavy vinyl flooring, notched trowel to apply it.
Roulette, pencil and water level or control rail.
Trapezoidal knife, square, spacer wedges.
Heel and mallet for castle coatings or a smooth lapping roller (weighing up to 50 kg) for glue.

Quartz vinyl is installed as both parquet and laminate. More than 15 basic layouts to choose from.

Layout schemes.

Please note that upgraded locks such as BerryAlloc or Karwei allow any of the above schemes to be used. After suitable option is selected, it is necessary to break down the axes of the room: lines are drawn from the middle of the walls and the central point from which the installation begins is located. When laying "in a runaway" position, work should be done from the far corner of a solid wall.

Layout schemes for the premises for laying

Optimum temperature during installation is from +15 ° С to +25 ° С, air humidity is up to 60%. Leave the cover unpacked for 48-72 hours to acclimatize.

Remember that the base must be:

Smooth - the permissible difference is no more than 2 mm for every 2 meters of the surface. If necessary, the floor is leveled with self-leveling mixtures, sanding or dry screed from plywood sheets, chipboard, OSB, gypsum fiber board, etc.
Dry. Moisture content of mineral bases - up to 5%, organic - no more than 12%.
Strong - not less than 15 MPa. It is advisable to pre-prime the surface to increase bearing capacity and uniformity of absorption.
Clean, without traces of old paintwork materials, bitumen, soot, oils, dust and dirt.

With the adhesive installation method, the glue is applied to the base with a notched trowel to a width of 1-3 rows, then the tiles are laid, carefully leveled and smoothed. When assembling in a "floating" way, laying is done in the same way as. That is, the strips are applied to each other and snapped into place. Do not forget about the expansion gaps around the perimeter of the room - at least 8 mm between the canvas and the wall.

Interior view

The range of manufacturers of quartz-vinyl tiles includes not only wood decors, but also interesting textures of stone, ceramics, textiles. Modularity allows you to combine shades and textures. What can come of this - see below:

Advice! If you need repairmen, there is a very convenient service for their selection. Just submit in the form below detailed description works that need to be completed and offers with prices from construction crews and firms. You can see reviews of each of them and photos with examples of work. It is FREE and non-binding.

We owe this material to Japanese developers. It belongs to the multilayer group. In section, it resembles a pie, consisting of five layers of different thicknesses:

Base. Consists of pure polyvinyl chloride, which allows the product to fit as tightly as possible to the base.
Basic. The thickest of all layers. It is formed from a mixture of quartz sand or marble chips and pvc. Moreover, the share of the first component can reach up to 75%. This gives the product strength and good insulating characteristics.
Reinforcing. Located inside the main one. It is a glass fiber that effectively reinforces the part.
Decorative. Can be made from various materials on which the drawing is applied. It can be an imitation of any coating or an ornament, drawing, etc.
Protective. Polyurethane foil mixed with aluminum oxide. Has increased durability and anti-slip effect.

In addition to sand and pvc, other ingredients are included in the composition. Despite the fact that there are synthetic substances among them, they are all safe and. Provided that a certified product is considered.

Strengths of the material

The tiles are good for different spaces. It can be laid in the bathroom, toilet. In any case, it will last a long time and will not lose its attractive appearance. This is due to the resistance of quartz vinyl to external factors:

Liquid. The coating is completely insensitive to it. Neither humid air, nor the ingress of large amounts of water onto the surface will damage the cladding. Therefore, it can be installed even in swimming pools, saunas, etc. premises.
Heat. Thermal deformation of the quartz vinyl plates is not threatened, so they never warp. During operation, gaps between the elements do not appear. The material does not burn, and does not emit toxic substances when heated strongly.
Chemical compounds. The use of any household products is safe for cladding. It is inert to alkalis and acids.
Mechanical damage. The protective film covering the surface of the parts is very durable. It is difficult to damage it, so accidental scratches, dents or chips are almost impossible.
UV radiation. The product is well protected from ultraviolet radiation. Doesn't even cause burnout and discoloration.

All these properties explain the durability of the material. The manufacturer gives a guarantee for a 20-year flawless life of the quartz vinyl floor. Subject to the rules of operation, it will be even larger. The finish is comfortable to use. It is pleasant to walk on it because it is "warm". The difference with ceramics is palpable. When laying in the bathroom, you do not need to use rugs or mats to protect your feet from the cold after bathing.

It is very easy to clean the cover. It is well tolerated by anyone. You can vacuum or wash it with any solution. Another plus: during the production process, the material is treated with an antistatic agent, which makes maintenance even easier. Dust does not accumulate in the joints. In case of damage to the cladding, it is easy to repair it. It is enough to take out a fragment with a defect and put a new one.

Disadvantages of quartz vinyl

There are not so many obvious disadvantages to him, but still they are. The main one is good elasticity. This property can be considered an advantage, because thanks to it, it will "lie down" where it is impossible to lay "hard" floors. However, in this case, special attention must be paid to the base. It must be well leveled, otherwise all the irregularities, bumps and depressions will be too clearly noticeable. The elastic plates will not hide them.

And one more nuance. Lock-joint quartz vinyl tiles are the only right choice for. The likelihood of problems with possible repairs... It will be very difficult to remove the fragment glued to the concrete.

By reviews users can identify another drawback of the material, which is associated with its plasticity. If you put very heavy furniture on the floor, after a while, dents under the legs may appear. This is due to the effect of too much weight on a small piece of quartz vinyl.

Cladding attachment types

There are two ways to attach the elements. They can be glued to the base or assembled as a "floating" floor. Therefore, there are two types of finishes:

With a lock connection. Each plate is equipped with tongue-and-groove locks, which snap into place during installation.
With adhesive bond. The tiles are glued to the base end-to-end. can be applied to the back of the element during the production process, then a self-adhesive type of coating is obtained.

Both options are in demand and easy to install. It is impossible to say unequivocally which quartz vinyl tile is better, glue or lock. Considering that the method of fastening does not affect the operational characteristics in any way, you can choose any most convenient option for your home.

Installation features

Laying the plates is not particularly difficult. You can do it yourself or even alone, since their size is small. They are easy to transport and install. The first thing to do is to properly prepare the foundation. It doesn't matter what it is made of, and what type of cladding joint will be used, in any case, the surface must be flat and dry.

Concrete must be cleaned of dirt and dust, remove defects, if any. For better adhesion with the adhesive, the base should be primed. However, the screed is not required. A surface is fine as a base. In this case, the gaps between the sheets are closed, the caps of the screws are sanded. Before priming, it is advisable to treat the tree with an antiseptic.

After preparing the base, you can proceed with the installation:

We start with the markup. Find and mark the central point in the room. Styling will be done from it. To facilitate the work, we outline the lines along which the plates will be laid.
Apply a thin layer of glue to the base. We are waiting for it to dry. Depending on the brand of the composition, this happens on average within half an hour.
We start laying tiles from the doors or from the center of the room. We put each plate end-to-end with adjacent elements. So that there is no gap between them. We roll the coating with a special roller to remove excess air.

We remove the protruding glue with a swab dipped in ethyl alcohol. Immediately after installation, you can only walk on the new floor, but it is undesirable. It is worth waiting for two to three days. It will be possible to wash the coating for the first time after five days. Trimming of parts is done with an ordinary knife; no special tool is required. Laying plates with locks is no different from installing laminated quartz, protected from mechanical damage, but also moisture resistant, inert to most chemicals and not afraid of temperature extremes. Vinyl products contain a large number of synthetic ingredients that are unsafe for humans. May release toxic substances when heated. By this they differ from environmentally friendly and safe quartz vinyl.

The latter can be mounted on any type. Truth, provided that the maximum heating temperature allowed by the manufacturer is not exceeded. It is undesirable to lay vinyl cladding on a heating base.

Quartz vinyl tiles - practical and functional choice... She has good performance characteristics and at the same time differs in the most varied design... It is very easy to choose a decor to your liking. These can be high-quality imitations of the most different materials, cladding with original textures, patterns and colors, and much more. Quartzvinyl is confidently gaining popularity among users, and its demand will only grow.

Prepared by: Inna Yasinovskaya

Practical vinyl floors have become an excellent alternative to parquet flooring, solid wood flooring natural wood and others exclusive options, the price of which often makes you abandon the desired idea. And now each user can create original design compositions at home, fill the interior with individuality, combining textures and shapes of flooring.

Vinyl floors - unique material... They have the qualities of a laminate, wooden board and linoleum, but they are completely devoid of the disadvantages of such a cladding - this is what the manufacturers say. But is this true and what makes up the price of the coating, which is much higher than ordinary tiles, but lower than some collections wood cladding- you need to figure it out.

Technological features of production

The relatively affordable cost of a quartz vinyl floor is due to the simplicity of the technological process. It is based on the method of hot pressing of PVC, quartz chips, a certain amount of inert fillers and fixers. A reasonable combination of natural substances and chemical components allows us to guarantee complete safety of products for users in terms of toxic emissions.

Each element consists of many layers that fulfill their functional tasks: strength, form strengthening, plasticity, aesthetics. A upper layer in addition to protecting it, it performs a "sealing" work, preventing water and volatile substances from penetrating into the structure of the element and not releasing chemical compounds outside.

Types of vinyl cladding

Manufacturers offer several types of quartz vinyl flooring: rolls, tiles of various shapes and vinyl laminate. You can see all types in the photo, but reviews and videos from designers presenting their work on the design of areas will help you to choose various premises... All goods are also divided into classes of wear resistance and have different quality and specifications.

Wear resistance class

The main parameter that determines the practicality of vinyl flooring. They are divided like this:

43rd is the most durable class. The protective layer is 3 mm wide. The product is shown for use in rooms with a large throughput. This floor can support the weight of a passenger car. The price of the product is high, which corresponds to the extremely high quality characteristics... Famous brands: FineFlor, Tarkett, Vinylam. Vinyl of this class of durability has anti-slip properties, can be used in industrial, production workshops, in public car parks, in garages, shopping centers... Increased elasticity, antistatic properties, complete absence of layer migration (with professional installation), non-susceptibility to breaks are obvious advantages of the product. The service life is from 20 years.
32-42 – middle class wear resistance. Protective coating layer 2.5 mm. Vinyl laminate flooring of this class is shown for rooms with medium and low traffic. The flooring has proven itself well in schools, offices, shops and private buildings. When choosing quartz vinyl plates of medium wear resistance, pay attention to the proposals of the companies FineFlor, Decoria, Tarkett - the collections have increased strength, environmental friendliness and a long service life exceeding the standard 12-15 years.
Vinyl of class 23-31 is used for household use. Such floors are only installed on private premises. The top coat does not exceed 2 mm, so the cladding cannot withstand heavy loads. For example, tiles tend to bend under heavy furnishings. The service life of vinyl laminate does not exceed 7 - 8 years.

Quartz vinyl tiles

One of the most demanded materials, superior in quality to any other coating. At the same time, the price of quartz vinyl tiles varies from economical to extremely high. There are several types of material, differing in the method of joining to each other:

Glue lock. The tile is equipped with 4 adhesive strips, which are fixed to another element by pressing. The material is easy to install, and also does not require preliminary preparation rough coating- can be laid on old floors by removing large debris. All editing processes will be prompted by a video tutorial.
Glue-free base. For laying the elements, a special adhesive is required. Installation is carried out on a perfectly prepared flat surface... The elements are thin, have a springy effect, the price is moderate, customer reviews especially highlight the products of Tarkett and Vinyl.
Adhesive base. Elements covered with adhesive back side... Preparation for installation requires cleaning the base, and installation is done by simply pressing down the evenly laid elements. All processes can be viewed on the video, and the photo of the design work will tell best options creating a patterned pattern.
Groove lock. Has a structure similar to laminate panels (thorn-groove system). Laying the elements requires a perfectly flat base. Quartz is not recommended vinyl covering in rooms with "floating" floors.

The locking connection of the elements is an ideal floor for premises of any purpose, even though the price of the product is quite high. Installation is carried out by means of spikes located at the edges of the elements (5 * 25 mm), installed in series. When laying, the spikes are fixed in special locks, which ensures the strength of the connection to the coating.

Advantages of Quartz Vinyl Laminate Tiles

Combining a versatile set of quality parameters, quartz vinyl tiles have properties that allow the coating to be used in any room. Manufacturers managed to combine in the product a list of necessary criteria required by users from any facing material: practicality, reliability, quality. It is worth remembering that price is sometimes the determining factor: the higher the cost, the more perfect the operation will be. Therefore, before buying a quartz vinyl floor, it is worth looking through the reviews about the products, the manufacturing company itself, and also familiarize yourself with the range of products by scrolling through the photo catalogs.

Quartz, which is present in the composition of the elements, provides strength, vinyl - flexibility, heat resistance, chemical resistance and moisture resistance. The polyurethane top layer completely protects the tile structure from external influences, and also preserves the aesthetics of the finished floors.
Laying the fragments end-to-end guarantees the safety of the subfloor, and the waterproofing adhesive layer provides additional noise and heat insulation.
Quartz vinyl coating has a high coefficient of thermal stability, which means that the tile will not "float" when increasing temperature regime and will not warp in minus cold weather.
The wide assortment of the line allows you to choose the cladding and make the floors the way the user wants. The entire color and texture spectrum is shown in the manufacturer's photo.
Frost resistance of the coating has long deserved positive reviews buyers. Vinyl tiles high level resistance to wintering on open verandas, terraces.

Disadvantages:

Price. The cost may seem high, but the service life, ease of installation and maintainability of the elements make you forget about renovating floors for a long time.
Tiles with a self-adhesive backing must not be mounted on a cement screed.
Substrate preparation required prior to vinyl installation.

Features of laying laminate, quartz vinyl tiles

If you are not afraid of the price, then this cladding will become the best choice for a home craftsman who decides to complete the repair quickly and without any problems. Preparation for installation will not take much time, and the work itself is done literally in 3-4 hours. What is important to consider when starting to renew the coverage:

The base must be absolutely flat, without debris;
Installation of the coating is carried out from the center or one corner of the room, with the gradual filling of all other areas. The goal is to close the center with elements without cutoffs, but closer to the wall plinths, the tiles can be cut;
Quartz vinyl tiles with a lock joint are laid according to the principle of laminate installation: starting from any corner farthest from the entrance, with gradual filling of the room;
For elements with a glue lock, a rolling roller is required: after installing the tiles, the joints must be rolled.

Finally

The high price of the material is fully supported by the excellent quality of the products. Thanks to quartz vinyl tiles, the user can create a unique pattern, give individual style room and easy to decorate even the most neglected old floors. The best collections are represented by well-known companies such as Tarkett, Vinylam, FineFlor - cladding standards are confirmed by quality certificates, environmental safety... Lightness and ease of care, pleasant springy effect, huge selection colors and textures are clear advantages of the product.

Quartz vinyl is a tough and resistant floor covering that until recently was mainly used for decoration industrial premises... Today, quartz vinyl floor tiles are often used for furnishing apartments. Consider what this material is, what advantages and disadvantages it has, as well as possible finishing options.

Quartz sand is the main component that makes up most of the tiles (depending on the model's features, from 60 to 80%). The rest is various impurities that are added in order to obtain certain additional characteristics and properties of the resulting product.

So, the main characteristics of tiles - strength, resistance to fire and water, are present precisely due to quartz sand, while all kinds of plasticizers, stabilizers and pigments, in combination with vinyl, serve only as an addition. Plasticizers provide a certain flexibility to the material, which makes the installation process easier.

Stabilizers provide protection from exposure to light and high temperatures, but all kinds of colors are available due to the addition of pigments. At the same time, the use of special additives even allows you to create imitations of any textures.

Features of preparation different types surfaces. How to grout tiles. Criterias of choice tile covering for the floor.

But if homeowners decide to resort to the first method, then you will need to purchase a high-quality adhesive, which can be made on the basis of rubber or acrylic.

Helpful advice! In order to avoid any problems associated with the quality of fixing the elements, it is recommended to purchase the adhesive that the tile manufacturer recommends for use.

The laying procedure is carried out according to the following algorithm:

Preparatory work, including dismantling the old coating and leveling the base. It is also necessary to putty all cracks and crevices, or you can simply make a new screed.
After that, they go directly to the laying of the tiles, which begins with the marking. Initially, you need to mark the starting point and the lines for laying the elements.
Then all that remains is to apply the adhesive to the floor surface and lay the tiles, carefully rolling over the top several times with a roller to smooth the coating. Corner and edge pieces are trimmed immediately prior to installation to avoid inconsistencies.

Important! All excess glue must be removed before the composition dries. Otherwise, the appearance of the floor may be damaged.

In addition, experts recommend observing the most comfortable conditions for laying this material, including the dryness of the base (no more than 5-6% moisture). It is not worth laying tiles on a surface with an adhesive immediately, but only after waiting a few minutes. It is also worth paying attention to the recommendations provided by the manufacturer himself, since usually the instruction offered to the material contains all the nuances necessary for high-quality styling and further exploitation.

Secrets of installation and further care of the coating: expert advice

In addition to the basic rules for laying, which must be followed in the process of work, professionals recommend paying attention to some not so obvious, but no less important aspects:

ideal time to dry adhesive composition on the surface before laying the tiles - 30-40 minutes;
if the flooring suggests a pattern, you always need to start laying from the center of the room. If the tile is monochromatic, then you can start from the door;
if in the process of laying on the way there are any obstacles that need to be bypassed, for example, a staircase or a column, then you can cut the tiles to the desired size using an ordinary knife;

all figured holes in quartz vinyl tiles are made using a special template, which must be prepared in advance;
it is not recommended to proceed to laying the tiles immediately after purchasing it. It is better to wait at least 48 hours so that the material can adapt to the conditions in this room. In this case, you should not remove the tiles from the packaging;
if planned self-styling, it is best to prepare in advance all the tools necessary for work, including: a sharp knife, a simple pencil, a notched spatula for applying glue, a square and a special roller that will eliminate air bubbles from under the tiles;
It is believed that concrete base- poor base for laying quartz vinyl tiles. This is due to possible difficulties in the future, if dismantling or replacement of individual elements is required;
Since the material does not tend to expand as a result of increased moisture, there is no need to leave gaps between elements or space from the wall.

Important! Special attention should be paid to the laying of the coating if a floor heating system is provided. In this case, it must be turned on at least 10 days in advance to allow the floor to warm up. In the process of working with glue, it is worth keeping the temperature at about 18 degrees. It must be kept for at least three more days after laying. After that, the heating can be turned off until there is a real need for it.

Quartz vinyl tiles: reviews. The whole truth about the use of material

In the process of considering information about what quartz vinyl tiles are and what are the advantages of its operation, one has to face an abundance of conflicting opinions regarding this material. Someone enthusiastically praises the simplicity and usability of this coating, while others point out the shortcomings. Consider what opinions exist, and what you should pay attention to before making a choice.

“The tiles were laid about a year ago, so we managed to evaluate them throughout all seasons: both in summer and in winter. In the summer, of course, there were no problems at all, but when the cold weather came, I definitely didn't want to go barefoot. But in principle, this can be completely solved by the presence of warm socks or slippers. "

Margarita Tyumentseva, Moscow

Due to the fact that it has moisture resistant properties for quartz vinyl tiles, an additional waterproofing layer is created under the coating

“When I was doing repairs, I bought for the bathroom walls PVC tiles and for the floor, quartz is vinyl, as I read that it resists water best. And this is true, because several years have passed and there is no damage. "

Oleg Lazanov, Yaroslavl

"Me long time from such an acquisition was stopped only by the installation technology, since the lock joints are rarely of high quality, and whenever possible I try to refuse them, and I was reluctant to mess with glue. Therefore, he pulled the flooring change as best he could. In the end, laziness won out, and still put the quartz vinyl tiles on the locks. So far there are no problems, but only 8 months have passed, so we'll see. "

Vadim Satsky, Voronezh

“We first got acquainted with this material from friends. They had self-adhesive vinyl wall tiles in their bathroom. We liked the price that was announced to us. Here are just a wife on some forum deducted that quartz vinyl floor tiles are unhealthy. Of course, there is no real confirmation of this, but just in case we decided to abandon the idea. "

Ruslan Chervorukov, Belgorod

As you can see from the reviews, quartz vinyl tiles are not to the taste of every owner. Someone thinks it is not warm and cozy enough for use in an apartment. Well, someone is attracted by its stability and long service life. In any case, the decision remains with the owner, and having considered everything technical aspects such a solution, as well as after reading reviews about quartz vinyl laminate, you can come to one or another conclusion about the appropriateness of its use.

How to care for quartz vinyl tiles

Ease of maintenance is one of the main advantages of this material, so you can use any available funds: broom, vacuum cleaner, water, any household chemicals. What's more, tough stains can be easily removed with a hard sponge that won't damage the coating's integrity but will remove any tough stains.

After familiarizing yourself with all the characteristics and reviews, quartz vinyl floor tiles can leave an ambiguous impression about how successful such a solution can be called. But practice shows that this option is worthy of consideration on an equal basis with others, especially if the finishing of premises with high traffic and serious loads on the floor is to be done.