How to use laminate on the wall in the interior of various premises. How to separate the walls with laminate? Laminate on the walls with your own hands

Hello dear blog readers! If you are here today, then you thought about the finishing of walls with laminate. But to the end you can not imagine how they may look. It is for you that we have collected 150 photos of interiors with laminate on the walls. Looking at them, you just finally decide.

We will definitely consider ways to fastening, permissible gaps, combinations of colors and much more. Let's start in order.

Summary of this article:

Laminate on the wall in the interior of various rooms

Walls are separated by laminate in completely different rooms and rooms. In this section, we will clearly consider the options for such a finish.

In the interior of the living room

Wall decoration with laminate in the interior of the living room is very common. The design of any living room is definitely not injured from the presence of this, "traditionally" flooring.

In the hall

The wall of the laminate in the hall additionally reflects this and without that significant room. You can verifiable below.

In the kitchen interior

The wall decoration with laminate in the kitchen is not only designer character, but also practical. A good waterproof laminate perfectly visually will fit into the kitchen interior and fully complement it. For example, apron from this material is easy to clean and clean, at the same time is great in appearance.

In the bathroom

The finishing of the toilet and bathroom with waterproof laminate is very relevant in recent years. This concerns not only the floor, but also walls. Options for such a finish are presented below.

In the interior of the hallway

The wall decoration by the hallway laminate is carried out horizontally, vertically or a Christmas tree. The design of the corridor in all cases remains in the plus.

In children

Laminate in the children's room can be distinguished by one of the walls, for example, behind the door. There are options for the complete firmware of all walls.

In the interior of the bedroom

The design of the bedroom, with a wall of a decorated laminate, stands out by its novelty and modernity against the background of other obsolete finishes. See for yourself.

Wall decoration and balcony or loggia ceiling

Walls on a balcony or loggia can be sewn completely or partially. It is better to restrict ourselves to one surface - it looks more interesting.

Rooms figured out. It's time to consider fastening methods. About this next.

Methods of fastening

There are several laminate fastening methods. How to put - as a result, you will only tell you about possible technologies of cladding and installation.

Using kleimers

Kleimers are special metal staples intended for reliable laminate fixation. This fastener is perfect for mounting and laying laminate panels on the walls.

Kleimers can be screwed into a wooden or metal crate, or in the base wall itself. They tightly cling to the grooves of the laminate board and firmly fix it.

With clamp

The crate or frame of wood, or metal profiles, is collected by observing step half the length of laminate laminate. This will be quite enough for reliable fixation.

Without trint

Many people will think - and is it possible, and how to fix the laminate on the wall without a crate. We answer - it is possible and very simple - with the help of glue. If the surface of the walls is not flat, you first need to be aligned, and then it is then started to stick.

How to put yourself?

All work on laying laminate on the walls can be performed independently. For this you do not need to be a super master. Any wall can be qualitatively seen with your own hands, whether it is smooth or curve.

Very often people ask us - how to kill laminate on the wall? So - it is not necessary to nail it anywhere, even if you even imagine that the hats of nails will be driven into the lamellays, the next board does not fall tightly.

Remember the main thing: before start on your own fix laminate on the walls - let him get sequalled after the purchase, it should be soaked at the atmosphere of the room and take the ambient temperature.

Mounting with your own hands can be divided into two main options - horizontally and vertically.

How to mount vertically?

How the laminate is attached to the wall vertically - you can easily guess. And there are no special difficulties here. A horizontal doomle is simply assembled and with the help of glue, or kleimers are installed.

How to fix horizontally?

How to put the laminate on the surface of the walls horizontally - it also seems to be easy to guess, but there is a nuance here. Laminate is heavy by itself, because of this, the lecture must be sure to strengthen the bar, so that the whole design does not move down.

Either, you can use kleimers, then no one should point anywhere. We advise this option to choose to all.

How to glue?

Mix laminate on the walls can be horizontally and vertically. You can not bother to sculpt the lamella directly on the concrete wall, if it is very smooth.

If the wall is uneven, you need to pre-perform the alignment of putty, plaster, etc. Or you can collect the frame and glue the laminate on it.

Pocking sticking, and on what it will stay - we'll figure it out further.

What glue glue?

Casting walls with laminate requires powerful adhesive composition, because Weight lamellas are not small.

Do not save on the glue - this stony can lead to deposits in the future. Laminate can fall off after a while.

Take high-quality variants of liquid nails from well-known manufacturers.

With liquid nails clear. It's time to discuss permissible gaps.

How much to retreat from the walls when laying?

When laying laminate on the walls, you should leave the floor, walls and ceiling up to 20 mm, because Laminate can expand over time.

Clearance can be enlarged if you plan to close the ends with special corners.

The distance between the wall and laminate is not fundamentally. If you are creating the panel directly on the wall, then the gaps are not needed if it all depends on the cross section of the bars.

Many people choose the bars thoroughly to have more space behind the laminate wall, to conceal the wiring and various communications.

With deposits and gaps figured out. It is time to think about how and what can the uneven edges of the edges be made after laying.

What to close the edges (ends)?

After laying the laminate on the wall, the question is born - how to make edges or ends? Plastic corners of various colors and shades are in help.

Additionally, there are profiles in the form of the letter P. They are metallic and plastic.

You can use a rubber plug, which is often used for sealing slots when installing stretch ceilings. The main thing is that the color gamut coincides.

All listed options are attached to liquid nails or ordinary silicone sealant.

How to cut off the walls without disassembling?

If it happened so that the laminate laminated tightly to the adjacent walls began to dust - this is a sign that it is time to cut.

It is best of all of course to disassemble the whole design, but if there is no such possibility or desire - you can carry out a trimming, without disassembling.

To do this, you can use a manual circular saw, exposing a step into a laminate thickness with a gap.

There is another option - ordinary Bulgarian, but here you need to be very careful, because This tool is very dangerous. There are special saw disks on the laminate.

You can also use a laminate saw, whose varieties can be found in building stores.

The easiest way to perform a trimming can be acute a sharp chisel by chanting the cut line with a construction knife. The cut will not be completely even, but it can be easily corrected by closing the ends after the end of the work. How can this be done we talked above.

A color scheme

It is time to think about how to combine the laminate of different colors on the wall so that it is combined with furniture, doors, wallpaper, etc. There are options for combinations on the bands, i.e. One band is one color, the second one.

In one of the articles, we already considered in detail how it could be if it is interesting to you - go on the link and carefully mean!

It is possible to combine in a checker order, and it is generally chaotic. It also looks good. We will later consider in more detail how the laminate of some colors on the walls looks.

Light coloured

Light laminate laminated on the wall is perfectly combined with furniture of any shades and varieties.

Grey

Gray laminate laminated on the wall emphasizes the individuality of the room and gives him seriousness and charm.

White

White laminate on the wall looks great. The wall, decorated in a similar way, brings light into the room, makes it more spacious and light.

With flowers and their variants of combinations figured out. It's time to consider interesting ideas for decorating walls with laminate.

Decoration and wall design

The design and decoration of walls with laminate can be engaged independently, and you can charge these actions to professionals. How to do - choose yourself, we will only offer some interesting ideas for implementation.

Decorative vinyl laminate

Vinyl (PVC) Laminate is an excellent decorative material that can be laid on the walls in absolutely any rooms. He is moisture console and has a self-adhesive layer.

That's all. It's time to spin. We sincerely hope that the interior photos collected in Article 150 with laminate laminate helped you finally decide on the future design of your walls. It remains only to realize the conceived. Huge good luck!

Below leave your comments, wishes, ask questions, express your opinion - it is very important for us!

Laminate is inexpensive, it looks pretty beautiful, almost like parquet, and the laying of this coating does not cause difficulties even from newbies. Such practicality of the laminate was liked designers and folk craftsmen to the idea that not only the floors, but the walls would be nice to separate the laminate.

Practice justified itself, and today the walls of residential rooms and offices lied by this finishing material are quite ordinary and even a popular solution.

Advantages of wall decoration laminate and some limitations

The advantages of the walls of the walls with laminate are somewhat several, so it is in general, in general, the flooring has become widely used to finish the walls.

Here are some:

1. Excellent appearance "under the tree", a variety of textures and colors;
2. Relatively small price and durability;
3. The coating retains a constant appearance over long years, almost not dumping, it is easy to clean;
4. Good fire resistance and tolerance of elevated temperatures;
5. Easiness and high speed mounting.

Of course, laminate is also inherent disadvantages, somewhat limiting the scope of its use. This is primarily its exposure to deformation under the action of temperature drops and humidity.

Therefore, for example, it is better not to think about finishing the walls in the bathroom and in the kitchen laminate.

Selection of laminate for wall decoration

The main characteristic of laminate is resistance to abrasion. It is determined by the coating class, the lowest of which is 21, the highest - 34.

The first serves as a little more than 2 years and is suitable only for rooms with low load on floor covering.

However, you do not need to forget that we will use laminate for lining the walls, therefore it will not be almost no load on it.

Thus, even the most inexpensive laminate will look on the wall as a new one for long years.

So, when choosing a laminate for finishing walls, you can not pay attention to its class, but to concentrate on parameters such as cost, texture, color, etc.

There is a lot of laminate colors. This is not only classic colors "under the tree" - oak, nut, pear, cherry, etc., but also modern "metallic", avant-garde white or black, etc.

Methods Installation of laminate on the wall

You can use a glue or frame method for cladding walls with laminate. The first, that is, in which the planks are glued to the base, can be used in any type of fastening, be it adhesive or lock.

Laminate with the adhesive fastening type today can be found quite rare, but if you chose it to arrange the walls, it should be glued with a special glue for the laminate.

If the laminate is a castle, then "liquid nails" can be used for the base, and for additional fixation - fasteners applied when installing MDF panels. It should also be borne in mind that the high-quality decoration of walls with a glue with a glue method without visible seams is possible only on a high-quality and almost perfectly level basis. It can be carefully plastered wall or sheets of plasterboard, plywood, etc.

1 way - fastening laminate for glue

1. Under the first line of slats on the floor, I mount the focus so that they do not slip under the action of their own weight.
2. We begin to lay the laminate, the first row is stacked by the level, the groove up.
3. On the base before laying glue is applied.
4. In order to guarantee the reliability of the connection, the grooves of the castle compound at several points must be attached to the base of the kleimer - fastener for, etc. (To do this, at the point of attachment, the lock on the bar must be cleared with a knife).



5. The joints (grooves) before laying the next row must be treated with a special water-repellent gel for laminate.
6. The next row is stacked in a chess order so that the vertical joints in the neighboring ranks did not coincide.

Before carrying out this work, it is necessary to dismantle the door platbands, they subsequently put them on top of the finish. Start laying a laminate from the left left corner.

2 way - laying of laminate on the doom

This method of laying is considered the most reliable and practical. In this case, you should choose a laminate with long and preferably wide straps, then the time consumption will be even less. In addition, this method of installation does not provide for preliminary alignment of the walls.



Install the doom:

1. It is better to use wooden rails 44x74 mm or 40x40 mm as a material of the roach;
2. In the first rail, we drill holes for fastening it to the base with approximately 30 cm;
3. We apply a rail to the wall, align it strictly vertically in terms of the level and mark the place in the wall, where you need to make holes under the dowel to attach the rail (from the floor of the rail you need to raise at least 10 mm);
4. In the wall, drill holes and secure the first vertical rail, just do, and with the rest - we mount them at such a distance so that the edges of the plank were held by the rails, while there should be another or two rails between the board.

Thus, attached to the laminate plank to the doom should be at least three-points.



Mount the laminate for the makeup:

1. The lower bar of the laminate is both a groove up on a screw with a secret hat, while you need to try to make this mount as low as possible so that it can later be closed by a plinth.
2. The upper part of the rake boards in the area of \u200b\u200bthe castle connection is nailed to the wooden rail. In order for the complex Castle's profile to prevent completely drowning a nail hat into a laminate board, a metal rod, cerne, etc. can be used when driving, and you can use the same kleimer, after reading the lock in this place. Remember that if the screw of the screw or nail will be released a little in the lock connection, then the jokes when laying the laminate will be with large slots.
3. The following laminate rows are stacked in checkers in compliance with the field mounting features with a lock connection.

The decoration of walls with laminate is undoubtedly a charm and originality to any room. This is a fairly simple process, and it can be fulfilled with your own hands without resorting to the help of specialists.

Pros and cons

The use of laminate for wall decoration has its advantages and cons.

The advantages include the following parameters:

• excellent material strength (panels can serve as one decade, while maintaining aesthetic appearance);
• environmental friendliness;
• a light weight;
• a huge selection of colors and textures;
• price (for walls you can buy inexpensive panels);
• the possibility of finishing the wall with their own hands, without hiring masters.

Minuses at the wall decoration laminate a little:

• illuminated requirements for the preparation of walls before the coating of the laminate. Walls must be perfectly smooth, or the installation of the crate is necessary;
• low resistance to temperature and humidity drops.

How to choose?

Due to the diversity of colors and texture, wall laminate for interior wall decoration can be used in any room.

When selecting material, you need to decide which functions except the decoration will perform a wall coating. As a rule, this is the leveling of the wall and the creation of a stylish updated design.

To cover the walls, laminate from 21 to 34 class of resistance is suitable. The material is better to select in accordance with the functional purpose of a room or another.

Laminated panels should be approached by style and color schemes to the interior of the room. For small and narrow premises, you should not choose the dark wall covering, it is better to stop on light shades. For example, the white coating will refresh the room and make it visually spacious. Light wall laminate is recommended to combine with light flooring.

Methods

After the color of the material is selected, are determined with the attachment method. The most common of them:

• With glue.The panels can be glued with liquid nails or silicone glue to the wall surface. The glue needs to choose quality to securely kept panels on the wall. This is the easiest fastening option;
• Frame method.Installation of laminate is carried out on a wooden crate. Wooden rails must be 4 * 4 cm. The gap between the guides should be no more than 6 cm. Place the rails must be perpendicular to the straps.

The skeleton method is the most reliable, but time consuming. It does not require preliminary preparation of the wall. This type of fastening is also suitable for situations when the electric wiring, pipes or other communications should be masked under the wall covering.

How to fix?

Fastening It is possible to exercise not only previously specified methods. There is another pretty simple method - laying with kleimers. These are special brackets for mounting laminated slats on the walls. Kleimers are two varieties:

• With served protrusions. They are mounted directly into the board;
• With a flat protrusion. We need to press the click lock.

With a frame method of fastening, nails, brackets and metal clips are used. If the perimeter of the coating area is small, then you can use the first two options. If the area is large, then it is more reliable to fix the clips panels, since with time the laminate may change the dimensions.

Installation

The following tools will be useful for installation: electric jigsaw, roulette, construction level, spatula, wooden bars, hammer.

Technology of wall decoration with their own hands:

• Calculate the required amount of laminate, it is desirable to purchase it with a reserve;
• It is impossible to make the installation process for curves, uneven walls, so they are pre-clean, plastering, dried. Or prepare the crate. Also another possible option - laminate to put on your own on the wall of plasterboard. Plasterboard should be securely connected to the wall.

• Determine the place from which the laying of the first laminated panel will begin. As a rule, this is the upper left corner.
• The panel mounting itself is carried out directly. If the adhesive method is selected, then liquid nails or silicone glue are applied to the back side of the bar and is fixed by pressing the short period of time. If a frame method is selected, the fixation is made using nails or klyamers.
• After installing the laminate, decorative plinths are installed. They close the distance between the wall, the ceiling or floor.

The laminated panels are attached to the wall horizontally, vertically or diagonally. Choose one of these options is possible, based on the design features and the difficulty of execution.

The horizontal method is ideal for narrow premises and is able to visually expand the space. It looks beautiful when combining two colors. If it is vertically to strip the wall, then it is thus you can increase the height of the room. This method is suitable for apartments or houses with low ceilings.

The diagonal version of the walls of the walls will make the room stylish and unusual. But this method is the most complex and requires a greater flow of boards.

In the event that you decide to put the laminate on the painted wall of the concrete painted by a water-free wall, that is, the risk that laminated barns will weakly hold on and will disappear after a while. Therefore, it is recommended to pre-clean the old layer of paint, putty and the plaster remove, and the surface is predicted.

How to cut?

So that the laminate coating is harmoniously in the interior of the room, it is important, in addition to compliance with the laying technology, know how and what to cut the laminate. For example, with an electric jigsaw, it is enough to simply cut the panel. The main thing is to choose the pylon to him.

There are several rules cutting laminated boards:

• On the back side, the pencil is stuck in the case of the section;
• Following the product on the table in this way, so that the part that will be cut, was on the weight;
• Next firmly fix the board and screaming in the required place.

Cutting material can also be carried out with a circular saw, but it is the disk for working on metal. With this tool it is harder to work than with a jigsaw. When cutting, the laminated coating is placed face.

Such a tool like Bulgarian, has many owners in a storage room or a utility room. Bulgarian is successfully used for cutting laminate. The only drawback when working with this tool is the appearance of a large amount of dust during cutting.

How much to retreat from the wall?

Laminated products are characterized by an increase in size at contact with humidity and temperature drops, so when installing you need to leave an indentation from the angles of at least 1.5-2 cm. Observe such a distance when laying with spacer wedges is quite difficult, so you can place the board or other impact material at the bottom. Similar thickness. In the case of installation on glue, the board turns into a layer of a special film, and the wedges are used on the sides. After the end of the installation work, indents are closed by plinths.

Which side is put on?

Rock laminate is recommended, starting on the left side of the wall, which is the opposite to the inlet, and it moves to the right. Thus, it is convenient to poison the material. But in the event that the installer is left-hand, then the installation starts on the other side of the room.

What to close the gap at the wall?

There are cases that the decoration between the laminate and the wall is formed slots.

Remove a large gap in several ways:

• Purchase in the construction store a wider plinth or make it with your own hands;
• Disassemble the coating and move it;

• Cut out of the same laminate thin strip and make a gap;
• Cut out the plinth.

But the last option should be used extremely careful not to damage the plinth.

Corners

When the laminate is separated by a wall, where there is opening the door, then the platbands before the start of the installation it is worth removing. When laying a product of its edge should not come into contact with the angles of walls, gender and ceiling, and the gap should remain. External angles can be closed with decorative corners.

How to draw backlight?

The illumination of the walls is an interesting way to create a unique design indoor. Lighting devices for walls can serve as an independent light source and optional. The setting of the wall covering can be made with their own hands. It is pretty quickly and not tasked for the budget.

For the mounting of the backlight, you will need: laminate, LED lamps, screwdriver, construction level, jigsaw, glue, fasteners, tape.

Backlight installation steps:

• First of all, the location of the lamps should be noted on the wall. It is necessary to think through the location scheme so that only the light is visible, and not the wires.
• Next, cable is carried out along the composed scheme, fixing it with holders. The cable is recommended from the outlet to competently calculate its length.

• Now install LEDs, laminate. Planks are separated into parts and glue downwards. The top panels will be put into the lower, therefore it is necessary to wait for the glue. Scotch and other fasteners will help secure them.
• The next step is to connect the power. On this, the mounting of the backlight is completed.

How to lay the last row?

To put the last row of laminate to lay out correctly, it is necessary to place a place scored, cut off and insert the comb into the panel mounted below, and the top edge is fixed with liquid nails or silicone on the frame.

How to close the end?

In order to close the end when finishing the walls, you can use aluminum laminated corners. They act as protection against damage and as a decorative element. Corners are manufactured in a wide range of colors, so it's not difficult to choose the desired hue. Fasten them with elastic glue.

How to attach plinth to the floor?

Plinth is considered one of the main parts in the interior. Thanks to the plinths, you can hide defects and coverage clearances. Currently, plastic and wooden plinths are the most common.

Wooden models are environmentally friendly, but their life is short-lived. Plastic can serve for many years, while maintaining aesthetic appearance. For laminate, the plinth of PVC is ideal. They are easy to crop, they are wear-resistant and moisture-resistant and at the same time.

To secure them in several ways:

• With clips.This option is suitable for any rooms. The only lack of clips - in the case of dismantling the plinth, you need to buy new mounts, as the clips do not withstand repeated installations;
• Fastening directly.Plinth is fixed with screws. Fastening places are masked by plugs selected by color. This method of installation of plinth is the most reliable.

Installing the plinth is the final stage of the finish. Plinth must be chosen under the design of the room. It is important to try to minimize the number of joints. Clauses need to be close to reduce the risk of dirt and dust in them.

While working with plinths, you need to take into account the parameters of the grooves in the connecting details to correctly determine the size of the planks. Fastening locations need to be chosen so that there is an absolute fit to the wall.

Interior design options

A wide selection of laminated products allows you to implement absolutely different design ideas for rooms.

For example, the use of laminate in the hallway as a finishing material for the walls will improve noise insulation. This material is perfectly cleaned by traces of mud, which is very relevant for the corridor. The covering of the corridor laminate has become popular and due to durability and wear resistance of the material.

In the corridor, separate areas can be distinguished using various shades or create contrast between the wall and the ceiling. Fully walls laminate, as a rule, do not crate.

If you decide to finish the walls with laminated panels inside the balcony and the loggia, then you need to remember the humidity and temperature drops. Therefore, it is worth stopping your choice on a laminate with an elevated stability class. They can be sewn completely all the walls, and you can combine with other finishing materials.

Another original solution is to use a laminate finish at the head of the bed in the bedroom. In the bedroom you can use the material of any class, since there is no strong temperature drops.

Harmonious material will look if you choose textiles for the bedroom of the same color. Beautifully looks like a design of one of the walls of white laminate in combination with a light brown flooring. Installing the backlight on the wall at the head of the bed will also add a highlight to the interior. Laminate, coming from the wall on the ceiling transforms such an important place in an apartment or house, like a bedroom.

The living room in the apartment also uses the use of laminate for wall coating. They can highlight a certain part of the room or, for example, only a zone for a TV and a fireplace. The living room in which the laminate and other coatings are combined, such as a stone. You can use gray shades of structural wood.

A large range of laminated panels makes it possible to use them in the bathroom. Due to the constant moisture and jumps of temperature, it is recommended to give preference to the waterproof laminate. In this room, you can apply absolutely any color palette. An interesting option is to highlight the laminate the shortest wall in the bathroom.

Mansard finishing with laminate - optimal solution. Most often it is an unheardous room, so it is important to pave heat insulation when installing walls. If you set the backlight in the panel, then, in addition to an interesting decor, it will be an additional lighting of the attic room.

In case you have chosen the walls of wall laminate in the kitchen, you should stop your choice on the panels above grade 23. Design options in the kitchen room a huge amount. You can purchase a coating under a stone or tree. Usually, a kitchen apron or one of the walls is distinguished in the kitchen. You can also finish the coating to decorate accessories, for example, a clock or picture.

Wall decoration with laminate will be a discovery for those who are looking for an original solution in the design of their home. Due to the unique combination of aesthetic and technical properties, the laminate can be successfully used for coating and finishing floors, walls and even ceilings.

Is it worth fixing the laminate on the wall?

The laminated panels were the test in the role of flooring, where he had proven perfectly. Therefore, it does not even have to doubt the reliability and practicality of the laminate as a decoration for the surface of the walls. The laminate panels are increasingly crowded out of apartments and offices more familiar wall coverings: lining, wall panels and MDF panels. This trend can be explained by the fact that laminate has much more advantages over his competitors.

The advantages of the laminate as a finishing material for the walls are as follows:

• ecology material. Laminated panels have a wood base, which makes them environmentally friendly;
• durability. Subject to the rules of operation and leaving the laminate will serve a lot of years and rather bother than he will lose his aesthetic species;
• affordable price. If you compare the cost of MDF and laminate panels, then in the second case it will be possible to save a significant amount. In addition, for the walls laminated panels can be bought thinner, and therefore cheaper;
• a huge range of textures and colors. This is an indisputable advantage that allows it to use it for the embodiment of various design solutions;
• easy in mounting. Laminate on the wall can be independently without resorting to the help of specialists;
• practicality. The coating can be washed, clean and polished.

Among the disadvantages it is worth highlighting what laminate can be applied in all rooms at home. Due to fluctuations in temperature and humidity level kitchen and bathroom - not the most suitable places for this type of coating. Although there are special moisture-resistant types of panels that are withstanding the effects of even hot water, but they are more expensive and demanding in care. Basement, cellar and especially the balcony with their microclimate will destroy even the most durable laminate. In these rooms it is better to use the lining or MDF panel.

Masters of the site site prepared a special calculator for you. You can easily calculate the walls of the walls.

Wall decoration with laminate: how to choose the material

In order to separate the wall with a laminate, you need to pick up and acquire the material. When choosing laminated panels for walls, you can safely save thanks to budget options. Under budget, the types of material that consist in a low-order class are implied (they have lower high-quality characteristics). Since the load on the walls is minimal, then thin and less durable laminate can cope well with the task.

After buying a laminate should fly in the room where it will be mounted, at least two days. This procedure is needed in order for the material to get used to the room microclimate.

But it is not necessary to navigate only on low cost. All the factors of influence should be taken into account (small children, pets) to cover under operating conditions. Therefore, when choosing, you need to take into account several parameters:

1. The level of mechanical and abrasive load. If the laminate has to withstand frequent cleaning or sharp claws of a pet, then choose the finest and tender coating is not recommended.
2. Color and texture. These parameters must be combined with the interior and harmonize with a floor laminated coating, if any.
3. Method of installation. Depending on how the fastening method is more convenient (for glue or frame), the selection of laminate will depend on. In this case, the opposite is true - the variety of laminate will affect how to fix the laminate on the wall.

Shpunte or click laminate can be used for wall decoration.

• The tongue is equipped with a tongue lock. This laminate can be attached to the glue composition without sneaking the tongs. As a result, it turns out neat and dry junctions. Also, the material strips can be mounted without glue, like lining, using brackets or small nails.
• Clean laminate is an advanced tongue model. The castle is presented in the form of a pear-shaped ridge, which is included in the groove and snaps down when pressing. Cleaning laminate is characterized as a durable material, stubble. In this case, the kleimers should not be applied, as the lock may not close, so when laying on the wall it is better to use glue.

The decoration of walls with laminate is not dusty, in the literal sense of the word, work, so everything should be quite simple. Laying laminated panels on the wall is possible in two ways: on the glue composition and on a wooden cut. These methods have differences, but each process should follow a certain sequence of actions.

How to fix laminate on the wall - step-by-step instruction

Step 1: Calculation of the required amount of laminate

Since the wall is a flat surface, then the calculation is carried out quite simple: the width of the wall is multiplied by height. Considering the climbing and fit of the panels, it is necessary to add about 10% to the figure. For the most rational use of the material, it is necessary to initially choose the most convenient on the size of the plank.

Step 2: Preparation of the working surface

Under the glue is quite simple and dry wall. For laminate, which will be attached to the frame, it is necessary to prepare an adhesive. Wooden rails of 20-40 mm sizes are suitable for drying, fixed by self-absorbers at a distance of 30-40 cm. Rakes are installed using a level clearly perpendicular to the direction of panels.

Step 3: Selecting a start point

If the entire wall or the upper part is trimmed, then starting the ceiling. In this case, it is necessary using the level to mark the line with an indent to one board from the ceiling in the appropriate direction (horizontal / vertical / diagonal). If only part of the wall is trimmed from below, the similar actions are carried out from the floor. The panels are stacked from left to right from the angle of the wall and deforming gaps (15-20 mm from the corners) are left.

Step 4: Installation of laminate on the wall

In the adhesive method: the wall and the back of the first row boards are processed with glue and using the level of the plank are fixed on the surface. The second row is similarly labeled with glue, but first inserted into the lock, and then pressed against the wall. For additional fixation, the lock is nailed with nails or brackets.

The laminate is attached to the laminate with special fasteners - kleimers, which are used to fix the Euro-making and MDF. Kleimers fix the laminate board at the bottom and at the top, creating a niche like. If the fasteners interfere with the panel in the groove, then you need to cut the lock in the places of fastening by kleimer.

Step 5: Step 5. Installation of plinths

Leave the locations of the connection of the wall with floor and the ceiling in unformed form is not recommended. Therefore, you need to use plinths and corners. To hide all imperfections, it is better to use overhead accessories, and if everything happens quite carefully, you can choose plinths that are attached to a recessed profile.

Pros and cons

The advantages of laminate on the wall in the interior:

• strong MDF and PVC panels, when hitting it does not break;
• does not absorb moisture due to the dense structure and protection of the polymer layer;
• easy to care with a conventional soap detergent;
• a wide selection of color and textures, imitation of natural wood;
• environmentally safe;
• convenient in masonry.

Disadvantages:

• the cost is higher than that of the panels;
• material requires a solid surface and reliable fastening due to heavy weight;
• suitable for finishing rooms with a constant low humidity indicator, the material does not tolerate temperature differences.

To create an accent in the interior, as in the photo, you can shelter the board part of the wall and ceiling, as well as supplement the backlit design.

Laminate color

Laminate colors can be divided into a cold and warm group, and when repairing you need to stick to one color. It happens with a shade of green, blue, white, red, brown.

You can choose a color under the tone of furniture and walls, and you can make a contrast wall in the interior, both options are appropriate depending on the design. You should also pay attention to the brightness of the laminate, which will define the fusion of colors, or contrast in one group of shades. Color can be selected under the door or under the color of the floor.

Light brown
Brown
Dark brown
White
Grey
The black
Multicolored

The combination of laminate on the wall requires harmony with the main interior trim:

• When laying a dark laminate of the whole wall, the rest is better to go into monophonic and light wallpaper;
• Dark plaster in the interior will look good at contrast with white laminate;
• To create an infinite space, you can separate the wall and floor to separate with one laminate.

Photo in living room interior

The decoration of the laminate is appropriate in the rooms of any destination, it is important in each case to combine the color of the panels with the basic color of the finish.

Laminate on the wall in the interior of the living room can be mounted both vertically and horizontally, it depends on the size of the room. For example, horizontal panels are suitable only for high living rooms and make it visually wider. Vertical installation is suitable for a mining room and make the ceilings visually above.

The photo shows an emphasis wall of horizontal panels with mirror inserts, which creates a feeling of the depth of the room, which continues behind the laminate.

Laminate on the wall in the kitchen

Laminate on the wall in the kitchen interior can be used as an accent contrasting wall and an apron of a working surface that protects against splashes and is easily mounted. Color must be harmoniously combined with the facade of the kitchen headset. To highlight the dining area, you can make a wall of laminate under the color of the dark wood.

Bedroom decoration

Laminate on the wall in the interior of the bedroom can be used as inserts over the headboard. If the bedroom is large, you can bind the whole wall with laminate and align it, hang color accessories and photos within. The comfort will create a laminate wall at the head of the bed.

In the photo example of an interior with decoration wall and floor trim in one color. It looks spectacular and creates the feeling of infinity.

In the photo finish the walls of the head of the bed, which is suitable for the overall eco-style interior of the bedroom.

Laminate in the hallway

Wall-mounted laminate in the interior of the hallway should contrast with the color of the floor and it is better to strip only the bottom of the wall. The laminate on the wall in the corridor is recommended to be attached vertically, as it will not make it visually less.

In the photo, the angle of the hallway will be covered with natural wood panels and combines with neutral shades of the interior.

Stock Foto In the bathroom

Laminate on the walls in the interior of the bathroom can only be used in the presence of ventilation, which is important for the durability of the design. Not suitable as an alternative to tile in the shower area, but you can select one wall with wooden finish.

Balcony or Loggia

In the interior of the balcony, the laminate began to be used for the trim. It protects the Wall-mounted insulation from moisture, it is also possible to make a shelf from it and lining cabinets on the balcony. Excellent option if the balcony serves as a working office.

Choosing a class and fastening method

When choosing a laminate, it is worth considering that:

• the laminate will not be affected by a strong load;
• the choice of the lock system depends on the fastening method;
• the interior with laminate on the wall should give aesthetic pleasure, which will help the range of colors and textures.

Methods of fastening

• Glue. This is a system without locks, installation is carried out only with the help of glue, which is applied to the side and rear part. The glue for the laminate on the wall should be on silicone, or "liquid nails". The panels glue each other, and the appealing glue you need to immediately clean the wet sponge. Rarely used for the crate.
• Clear. To fasten two parts, they are tilted at an angle of 20 degrees to each other and laminate will start in the grooves. The lock is easily snapped and firmly connects the panels. It can be fixed with glue to the crate, this option is resistant to mechanical effects.
• Shpuntea. Basin on the principle of a tongue lock, which does not need to be sized additionally. Fastening on the frame, the panel is strengthened in the excavation with the help of brackets.

What class choose?

For laying a laminate on the wall, it is not necessary to use the highest durable class (from 33 to 34), a sufficient material of low strength from 21 to 31 class.

In the photo, the white color makes the interior of the living room lighter, and the texture of the tree on the wall adds comfort.

Horizontal and vertical laying

Horizontal method

The joints converge into one line, which must be closed by plinths, and they are attached to the wall of a dowel-nail. The plinth is not more than 1.5 meters. In order for the laying is durable, the load is evenly distributed, the laminate stands before starting to cut into stripes.

Horizontal placement of boards in the interior (as in the photo) will make the room wider, and the vertical is higher.

Vertical method

The laminate on the wall is vertically attached to a flat surface with glue, there are many laying options, you can combine residues from different parties and colors to create a unique interior design.

How to fix the laminate on the wall? (video)

There are two common ways to mount on the wall: adhesive and shell.

Adhesive Method

It requires a smooth surface to which the laminate will be attached, otherwise the gaps will appear and the service life will be lower. Installation of a laminate board on the wall such method does not require special knowledge and can be made with his own hands. You can glue any kind of panels, with or without locks.

When installing glue, in addition to liquid nails on silicone, you can apply special glue, then the panel presses. For the best fortress, the lock can be punctured. It can excite the question of how to lay a laminate on the wall, if there will be many plaster on their alignment. In this case, it is worth choosing the second method.

Metal or Tree Cruise

This method does not require creating a smooth wall surface with plaster or drywall, as a frame is created. The lamp makes additional insulation and sound insulation of the room. Here the panel is attached to nails or kleimers. This method is longer, but will help to save on the alignment of the walls.

To create a wooden crate, we need 2-4 cm rails, which are attached to the wall at a distance of 20-50 cm parallel to the future panels. Metal frame is made from drywall profiles, also some manufacturers offer a ready-made frame.

Photo gallery

With a laminate board, you can experiment with the interior of the room and the originally design walls. Below are photo examples of using laminate on the walls in rooms of various functional purposes.