Plastic windows for the winter to adjust round troughs. We are preparing for winter: adjust the window mechanisms and accessories. Plastic window does not close

A qualitatively new level of comfort in our dwelling is considered metal-plastic windows from polyvinyl chloride (PVC).

When installing such structures, you will need a professional assistance, but how to adjust the plastic devices on their own during everyday use, is shown below in the recommendations.

Replaceing traditional old wooden windows Modern, you need to periodically inspect the operation of the opening and closing mechanisms, the condition and functioning of the fittings, which will increase their durability and functionality.

Plastic windows and adjustment tools

Adjusting serious breakdowns and faults We recommend implementing the experts of the company's experts expert ()

The most common faults with which can be copped without a specialist:

• When closed, the fraumuga hits the frame from the bottom or side.
• Insufficiently tight fit to Framuga frame.
• The shut-off planks were isolated.
• With an open sash in the "closed" mode, the window frame does not open due to the locking of the handle.
• The handle, overlooking, loudly adjacent to the frame or turns very tightly.

To eliminate malfunctions using the tool:

• passatia or pliers;
• hex key (4 mm size);
• flat and curly (crusad) dumping;
• a set of "keys-stars" to adjust the strength of the clamp;
• scissors to cut the sealer;
• massel for lubricating accessories.

Basic rules for setting up windows from PVC do it yourself

In modern metal-plastic windows, to achieve optimal pressed sealer throughout the perimeter of the sash, adjustment is carried out in three projections.

Separate elements, framuga accessories setting and tools may differ, but the instructions below are taken as the basis.

Summer and winter adjustment mode

The distinctive characteristic of modern PVC windows is the possibility of its transfer to the "Winter" or "Summer" regimes.

Window fittings happens:

• budget;
• standard;
• specialized.

Due to the low price, the fitness of the budget type has limitations of functionality. It is produced mainly by domestic manufacturers and is used in new buildings. In such metallophurity there is no translation function in different seasons, it allows Framuge to close and open.

In the summer season, with its hot days and warm nights, it is rarely who will think about whether the flaps are tightly adjacent to the window frame. But with the onset of cold weather, even the smallest slots begin to blow unbearable. What to do? Call specialists who will help to return to the house warm or save, eliminating the problem yourself? If you have a desire and some free time, it is quite possible to choose the second option. Of course, if you know how to properly adjust the windows for the winter.

We diagnose the problem

Make sure your windows really need adjustment. Direct testimony for further manipulations serve the following "symptoms":

• the sash saves and clings to the frame;
• the sash is not tightly adjacent to the frame, blowing out of the gap;
• furnitura breaks out;
• rotate the handle causes difficulties.

Eliminate the sash savings

Opening the window sash, remove the decorative lining with the loops. You will see the adjusting elements on the loops that need to be twisted, armed with a hex key (you can vote and do an ordinary screwdriver). Two tailoring, constantly checking the position of the sash - as soon as it gets up in the right position, stop and return the lining to the place.

We provide tight fit of the sash

To eliminate a draft that occurs due to the shutter-adjacent to the window, it may be necessary to replace the seal. Open the sash and carefully look at the tape. If everything is in order with the seal, then it is necessary to adjust the clamping fittings at the cold season. Especially in order for the consumer to know how to independently adjust the windows for the winter, manufacturers window fittings Provided in their products the possibility of changing the position of the metal axle with "summer" to "winter".

On the pin there is a hole under the hexagon. Consider and you will see a special label on the trowel, according to which the existing position of the sash is determined. If the point is shifted towards the street, it means that the window functions in the summer mode. To switch to " winter time»Show the position of the mark towards the room. With the onset of heat do not forget to produce reverse action. Otherwise, your window seal will not live for a long time.

Adjust the shedding handle

Preparing windows by winter, attention should be paid not only on the sash and seals, but also on the handles. During operation, this element of fittings can break out or, on the contrary, you will notice that it has to apply a tangible effort. In this case, you need to adjust or replace the handle. To do this, turn the plate, which is located at its base and unscrew the screws. Change old handle on a new one. If you want the handle to light up longer, time from time to time to handle it with a special lubricant.

Do you continue to doubt your abilities or simply do not want to spend time to find out how to adjust the plastic windows for the winter? Then contact us. The company "Ploxt" is always ready to help and professionally eliminate the problems encountered with the windows of the PVC on warranty and post-warranty service. Our experts will make everything competently and promptly!

Plastic window designs of different firms have similar adjustments. When they are installed, the average clips density are set. Over time, under the influence of wear or other factors, the sash can prick and start clinging the frame or an impos. When the temperature drops, the cold air from the street can start penetrating into the room. In all these cases, it is necessary to adjust the windows that can be carried out independently, if you know how to adjust the plastic windows on the winter switching the clamping settings from the summer to winter option.

What tools are needed to adjust the plastic window

Plastic window systems The most popular product that is established during construction or repair as a simple apartment and a chic multi-storey mansion. With all the variety of window fittings used in their creation, similar mechanisms are used in all systems. Preparation plastic windows By winter begins with the first cooling. The main tools that may be needed to adjust windows are:

• high-generated g-shaped width of 4 mm wide;
• screwdriver flat 4 mm;
• crushing cruciform;
• pliers.

How to translate windows in winter mode

In order to prepare euro windows to winter periodIt requires a seasonal adjustment of the clamping of plastic windows, at which the following steps should be carried out:

1. Adjust the opening sash vertically and horizontally - it should not be clinging the frame and clamping strips.
2. Adjust climbing strength to the frame. Adjusting the clamp is performed using adjustable pin or eccentrics, the number of which is 4-5 pieces on eurokeshoes, on the doors - 6-8 pcs.
3. If you have traction, with a maximum fit to the frame, it is necessary to replace the seal. Then check the craving on the middle position of the axle or eccentrics.

Climbing to the frame is based on the engagement by rounded elements of the clamping slave, when turning the knob down. These rounded elements made in the form of an oval are called pinges, and made in the form of a circular element with a shifted axis of rotation - eccentric. The rotation of the axle is produced by pliers. Their vertical installation creates a minimum clamp, which means the summer pressed mode, horizontally - the maximum strong clamp. Rotating an eccentric by adjusting hexagon, you can adjust the clamp from weak to stronger and back.

Determine the need to replace the rubber sealer can be inspected and verified. You can change it with parts - at the same time you save money. Going for buying a seal, you should take a sample with you and buy a longer piece. It is better to cut up more unnecessary with a sticker than to leave the gap. Buy a high-quality rubber seal. It will be necessary to buy special glue for him. Before inserting the seal in the groove, apply glue throughout the area of \u200b\u200bcontact with the seal, glue it, close eurowindow for the period of drying the glue.

Adjusting windows and fit is made in the case of large gaps or when it is clinging behind the frame. Adjust the opening sash vertically and horizontally needed in cases:

• if it clings the top of the frame - open the sash and the short side of the M-shaped key slightly push it on the top canopy;
• if due to sagging the sash clings low part Rama, it is necessary to do the same with the lower canopy;
• if it clings the vertical part of the frame or an impost (the average vertical part of the frame), it is necessary to slightly plugging it on both canopies in the opposite place of such a contact.

How to adjust plastic windows yourself

Wind adjustment can be made independently if available required tool. The only details that can break and require the replacement are handle and sealing tires. Adjusting the window clips is transferred to the winter mode. At the same time, the handle turns with the effort, the sash is strongly pressed against the frame, heavily squeezes the seal. In the spring it will be necessary to loosen the clamp, since the opening on the ventilation occurs often, which can lead to a strong wear of the closing mechanism and seal.

To transfer to the winter mode, you must do the following steps:

1. Check the presence of thrust inside or outside the perimeter with a lit match - even a small breeze will deflect the flame.
2. If the traction is present, it is necessary to open the sash and do the adjustment of the locking pin (eccentrics).
3. Tsazfa are 3 types - oval, round with a slot under a screwdriver or under the hexagon.
4. If oval pinows are located vertically, and the eccentrics are shifted towards the frame, it is necessary to turn them into the middle position to increase the clamping force.
5. Then it is necessary to check the craving again if it remains - to switch the trough (eccentric) to the winter mode. To do this, it is necessary to check oval pin in a horizontal position, and the eccentrics are completely shifted away from the street.
6. If after checking the thrust remains - you need a replacement of the seal.
7. After replacing the seal, check the thrust when setting up the axle or eccentrics in the middle position.

How to pull the loops on plastic windows

Adjusting the upper loop is performed using a M-shaped hexagon. On the top loop there is one adjustment of the upper plank horizontally. The displacement control process is performed with a short side of the hexagon in the adjusting opening, which is located in the end of the sash. The range of offset of the upper part is in the range from -2 to +3 mm. The key rotates the screw to part of the turnover and check the ease of closing.

Lower loop adjustment is made by the same tool. The difference is that on the bottom loop, in addition to the displacement of the lower plank horizontally, there is a screw offset of the entire sash vertically. The horizontal displacement is made by the method similar to the upper loop. The vertical displacement is made with a semi-open window, for which it is necessary to insert the long side of the hexagon vertically from top to bottom into the hole of the canopy when the decorative casing is removed. Such a change is possible in the range from -2 to +2 mm.

Setting up plastic windows when shrinking at home

Strong displacement of the supporting construction elements as a result of a shrinkage of a new building can cause strong departure of the frame from the frame, to reinstall the plastic window. If the opening has twisted hard, you will have to align it or order a new eurowownau. Internal adjustments of opening and clamping mechanisms can be corrected horizontally or vertically in the range of 2-3 mm. To do this, you will need a standard set of tools:

• special key hexagon 4 mm width;
• screwdriver 4 mm;
• pliers.

How to set a horizontal and vertical axis

To align the flap horizontally or vertical, the plastic window is required in the canopy. Alignment in the horizontal plane is performed by end adjustments on the upper and lower canopy with a fully opened window. The hex key is inserted by a short side into the hole. When the key is rotated clockwise, the sash attracts to the canopy, against the clock - to the impost. The maximum adjustment range is from -2 to +2 mm.

You can adjust the displacement in the vertical position on the lower awn in cases where the sash hits the frame or to change the values \u200b\u200bof the gaps. This will require a hex key. You must open the cap on the canopy, insert the hex key with a long end down into the upper hole. Rotating a bolt clockwise, the sash can be lifted, counterclockwise - omit. The maximum adjustment range in height is from -2 to +2 mm.

What to do if the plastic window does not close

Fitted on gaps from above, bottom and sides of the sash may not be closed in two cases. The first is associated with a breakdown of the handle, the second - with the incorrect work of one of the pairs of pin-clamp. To check, you must open the window and, pressing the double opening lock by your left hand, turn the knob down. If she turned to the extreme position, then the problem of closing in one of the pairs of pin-clamp. Determine which pair does not work, you can take turns, unscrewing the clamping slats with a cross screwdriver.

?

How to adjust the handle on the plastic window

Device, diagrams and photos of the elements of accessories, adjusting bolts, movable parts of euro-mounted, methods for eliminating faults and prices can be found on the Internet on sites on this subject. Adjusting the handle is the correct installation in accordance with the list. The opening handle has four positions:

• down - closed;
• aside - openly;
• up - ventilation mode;
• in the middle position between the upper and side - partial ventilation.

Replacing faulty

If you broke the handle, you need:

• screwdriver unscrew the upper and lower screws (or screws) attachments located perpendicular to the plane of the sash;
• insert a new handle in the same position in which faulty was removed;
• fasten it with two screws (or screws);
• return the protective plate in the original position.

If the handle on the window or the balcony is breaking, it is necessary:

• slightly pull the top and bottom of the protective plate on the handle and turn it into a horizontal position;
• with a screwdriver tightly fasten the handle;
• return the protective plate at home.

All elements of the canopy and closing of the sash are outside the design. The main actions in contamination of the elements of this mechanism are its cleaning and lubrication. If the window did not open for a long time, remove the dried dirt or rust with the help of the VD-40 universal lubricant cylinder. After cleaning, the wash should be smeared to the accessories, make it setting it.

Eccentrics are round elements that are engaged with clamping straps. The axis of their mounting is shifted relative to the center of the circle, so when rotating changes the distance from the axis to the point of touch to clamping bar. With an increase in this distance, the clamp of the sash to the frame is enhanced. The rotation of the eccentrics is performed using the hex key or screwdriver. The quantity change value varies from 2 to 5 mm, depending on the design of the eccentric. Customize the press strength is necessary twice a year when switching from summer to winter mode and back.

What to do if the window handle jammed

Among possible breakdowns The locking mechanism may occur to jamming the handle. Applying great efforts to the opening handle at the same time it is not worthwhile - accessories should be preserved to extend the service life. The jamming is possible in three situations - the window is open to ventilating, open or closed. If the knob is clinically in the first two cases, there is a skew when opening or triggering a special block. If the sash hangs on the same bottom loop, you need to do the following operations:

• turn the handle up;
• putting the top loop to the frame, set the handle to the right;
• close the window and turn the knob down;
• cressing the frame to the frame, totate the handle to the up and open on the ventilation.

The rotation block triggering can occur as a result of a sharp turn of the handle to a large angle when opening. Removing the lock is made by pressing the unlocking button or rotate the corresponding lever. Its location can be found on the website of the developer of your fittings. If there are difficulties with the opening, try to press the frame very much and turn the handle.

Tight turning or jamming of the handle with a closed window is possible when shrinking and strong (more than 2-3 mm) sorting window or door opening. It is extremely rare and difficult casewhich can lead to a frame of the frame or breakage of the mechanism. Without specialists construction company Or installments to solve this problem with simple adjustments will not be possible. It is possible to join due to the lack of lubrication of the shutter mechanism. To prevent this and increase life maintenance It is advisable to produce one or twice a year.

How much is the adjustment of Eurocon in Moscow

Repair and adjustment of plastic windows is made by many firms of Moscow, St. Petersburg, other cities of Russia, who know how to adjust the PVC windows can put new spare parts. Prices for such services are different in the regions of the country, they depend on the brand of the manufacturer of fittings. The departure of the master for technical inspection and drawing up the estimate of Moscow will be from 500 to 1000 rubles. The minimum order value of Moscow is from 2000 to 3000 rubles. The cost of basic works is indicated in the table:

Name	unit of measurement	Cost, rubles
Adjusting accessories (without removal)
Door setting (without removal)
Setup, repair, partial bulkhead mechanism (without replacement of accessories)
Adjustment, repair, partial bulkhead door accessories (without replacement)
Reinstall the glass package when adjusting
Reinstalling the door glass package (the price of the glass package is not included)
Cleaning, lubrication accessories
Replacing the seal (the price of the sealer is not included)
Replacing the full set of swivel fittings

Adjustment of plastic windows for the winter is very important moment In working with windows. Unfortunately, many many for some reason forget about it or simply do not know. Even the most expensive products will fail if not engaged in its service. In case of incorrect use, such unpleasant phenomena as noise, cold, as well as constant drafts are possible. After reading the article, you will know what you need to customize plastic windows, how to do it right and what errors should be avoided so that they serve during the whole term useful use Without any problems.

Plastic windows - use in the "Winter-Summer" modes

Modern windows function in two main modes, summer and winter. When buying new products, it is recommended to carefully read the instructions from manufacturers, where it is clearly and in detail, in what cases the setting of plastic windows for the winter is required and for the summer, as you need to care for them, as well as the basic rules of operation. Following their non-slip instructions, you will be able to avoid multiple problems, and the plastic structures themselves will serve you as long as possible.

Most people do not know how to adjust the plastic window for the winter, believing that this is a very complex and time-consuming process. In fact, there is nothing supernatural, any philistine is able to cope with this and without the help of the masters, for whose call, of course, it will be necessary to pay a decent amount. All operations can be performed independently, especially since even special equipment You will not need. Conventional Hex, as well as sets standard keysthat have every home.

To "extend" the life of the windows, it is necessary to listen to the advice of specialists who claim to adjust the windows necessary. The correct and correct setting of windows with your own hands allows you to increase the level of tightness, and also prevents the penetration of drafts inside residential rooms. Due to this, the microclimate in the apartment will always be at the normal level. Otherwise, the windows will be notched, in the room there is a permanent cold, and on the most plastic structures there is a manifestation of an increased level of humidity on the inside, including inner.

If you forget to translate the windows in the winter mode after a warm summer, the risk of harm the windows themselves, as well as residents of the apartment. This is due to the fact that the cold air masses get the opportunity to penetrate inside without any obstacles, which is most negatively reflected at the level of heat. Naturally, it will cause additional costs for thermal energy. In this regard, in no case should not forget about the adjustment of plastic windows for the winter, especially since it is possible to fulfill it in the most compressed time.

Configuring windows - when it may need

In addition to training directly to the winter or summer period, you can select a few more cases when you want to independently adjust PVC design:

• Immediately after installation. This should be engaged in a specialist responsible for the installation. It checks all the clamps, sash, fittings so that there are no problems with new windows, including problems with air penetration when the sash is closed, or too tight discovery. However, in the future, in any case, you will need to re-configure. This is due to the fact that the wizard sets up a window in accordance with the current time of the year. If you ordered installation services in summer, then you will need to prepare for winter in the fall.
• But even the master can be mistaken, although this error will not immediately appear. Drafts, a loose closure - these and many other signs indicate that in the near future, the double-glazed windows are required for the winter. You can invite specialists if windows still are on warranty service. Otherwise, you need to act alone.
• Mandatory inspection - it must be carried out at least once every two years. This will allow you to promptly warn the emergence of problems, due to which there may be full repair in the future.

Noticing any problems during PVC operation, as well as changes associated with deterioration temperature mode In rooms, all measures should be taken on rapid and timely repairs. This will avoid more serious problems, as well as cope with the situation when minimum costsboth temporary and financial.

Regulation instructions - how to do it yourself

All work must be carried out in advance, before the onset of cold. Otherwise, in the process of adjustment, you can encounter some difficulties.

Fittings are the main point to pay attention to. Just below, let's stop on it in more detail. Thanks proper setting You will get the opportunity to close the windows tightly and firmly, not missing cold wind Inside, nor foreign sounds and noises. Increased level of room noise, constant drafts clearly indicate that the accessories are not adjusted completely correctly.

Double-glazed windows for the period of winter frost are adjusted very simply, deep knowledge and skills here will not need. Opening the window sash, we can observe a special element that serves to lock. Also, he is called clamp. As a rule, it can be detected on a rectangular platform. When preparing for the winter cold, this clamp should be shifted towards the street, thanks to which the apartment owner achieves the maximum level of tightness and noise insulation.

Tightening the clips is a fairly easy process that does not require special skills and physical strength. Taking the hexagon, turn it counterclockwise at a minimum of effort. Further, everything is very simple, the clamp turns into the direction you need, it falls into the necessary groove and is automatically fixed.

Now you can not worry that in winter it will be cold in the room. You have just been able to adjust the double-glazed windows in such a way that during the winter colds to be in the room it was very warm, cozy and comfortable.

Accessories for windows - Features Settings

Most manufacturers in most cases do not do independent manufacture Fittings, referring to the help of various companies specializing on this. There are several types of fittings, which differs from each other with quality, reliability, complexity of the design, as well as cost. Consider the most popular species that can be found on any construction market:

• Roto fittings are distinguished by the presence of round heads. Preparation of PVC windows to winter with similar fasteners can cause certain problems, primarily associated with the tool to configure. Here, an ordinary hex key is not suitable, it is necessary to think about acquiring a special key with round cross section or a large head.
• Maco products are produced by the most popular accessories from glass accessories. This is due to the head shape - it is a large oval form. Due to this, the adjustment can be carried out with the help of not only the hexagon, but also the usual passage.
• Torx is a manufacturer of solid and reliable fittings. The head is standard here, with the help of a hex key, it will not be difficult to perform the adjustment of plastic windows on its own from winter for the summer.

When working with accessories, you need to be very neat and careful not to harm the design. Its repair and replacement can be very strongly hit by the budget. Most manufacturers use different degrees of protection, for example, mechanisms that prevent the twist of the clamp by 360 degrees. As a rule, if the clamp does not rotate in the specified direction, should not be applied to physical strength and try to continue rotation. This can lead to its breakdown and the need for complete replacement. Rotation blockers specifically for these purposes and exist.

Independent adjustment of PVC windows for the winter should be carried out very carefully. To do this, you need to highlight some time to patiently, carefully and without a rush correctly perform the setting. After twisting one head, you need to check the result of the work, making sure that the window began to close the tight.

If there is no effect, or the problem only aggravated, it is necessary to double-check what was done wrong. On the end side there are several clamps, the greatest effect can be achieved only when all of them are adjusted. Only in this case, you can achieve the maximum level of tightness and, as a result, intact of cold masses and street noise.

Rubber seal - an important component in the insulation of windows

Setting up PVC windows for the winter includes many additional processes. So, be sure to check the insulation, since problems with it are also the cause of cold indoors. Insulation are manufactured from rubber materials. Over time, their condition deteriorates, which can be caused by natural wear or mechanical damage.

Accordingly, this material requires care, as well as checking its consumer characteristics. In case of damage, no adjusted window will save you from the penetration of the cold during the winter frost.

PVC manufacturers recommend using various silicone solutions that do not allow elevated wear. Such lubricants are often applied by motorists, so it will not be difficult. Among the most popular funds can be allocated, for example, products of companies of Fenosol, Edelweiss, Kbe and many others. The principle of silicone action is very simple and lies in the fact that it covers the rubber material with a special thin film, the action of which continues for six months. After expiration specified period It is recommended to apply silicone lubricant.

In some cases it may be necessary full replacement Sealer. For example, care for it was not carried out at the proper level, or in the case when the window was not used for a very long time. In addition, there is such a concept as physical wear, when, after a certain period, the strength indicators of rubber start becoming worse, cracks and other defects appear. It is not worth it for a long time, especially before the winter onset, otherwise you will have to face very unpleasant consequences.

Note a few moments associated with the replacement of the rubber material. You can buy it in any construction store. Large difficulties should not be. Old Material It should be safely removed from the angle, the upper or lower. Carefully removing rubber, remove the remnants, clean all the available grooves from dirt, dust and garbage. If this is not done, some difficulties can occur with the installation of a new seal.

Installing a new layer of rubber starts from the top corner. The main factor for which attention must be paid is the laying density. Rubber must be exactly the sash, no stretching is allowed, it can only damage. By installing the material and tightly fixing it, you can feel free to hope that it will be much easier to survive the winter cold.

Problem moments - with which the consumer may encounter

Modern PVC windows are different complex design. Setting although it seems very simple, but even at the very experienced Masters Sometimes certain difficulties may occur. At the simple consumers, some errors in which I would like to focus on.

So, many think that the maximum increase in the pressure of the press is necessary. This will most positively affect the density of the fitting of sash, tightness, noise insulation. However, for the rubber seal, such pressure can be fatal. Its wear increases at times and after a couple of years it will take full replacement of rubber. At the fitness of the fitness too large also affects not the best wayBecause it is faster it is wearing, it takes off and loses the rigidity.

It is very important to remember that after it is not necessary to put pressure on the maximum force. It takes some time that the seal adapts to new operating conditions. However, huge pressure risks cause irreversible changes in the structure of the material itself, applying irreparable harm to it. And even after weakening the presser mechanism, for example, in front of the summer, the rubber sealer can no longer return to its original form.

As already noted, the adjustment of plastic windows with their own hands includes a change in the pressure of the pressure of all clamps located on the end. Pressure unevenness is another common error. It is necessary to pay enough time to make sure the pressure is approximately the same throughout the perimeter. Otherwise, there is a probability of blowing from the other side that adjies less tight.

Spring B. obligatory All comments should be loosen. This will allow the warm summer air to circulate freely in the room, and will not cause changes in the form of the rubber seal. After all, with the onset of heat of rubber, like plastic, expands due to warming up to high temperatures due to direct sun ray. So do not forget about the inverse adjustment for the summer period, because it is no less important for the durability and reliability of windows.

Performing the adjustment of double-glazed windows produced from PVC should be carried out in accordance with the following recommendations:

• It is necessary to completely explore the end side of the sash, since this is the most important part of the window, it is located cylindrical elements. During the movement of the sash in the space, it enters the window frame and is fixed reliably by means of said cylindrical mechanisms. After studying the end and detecting all designs that require settings, you can move directly to the regulation.
• At the end, two semicircular elements can be seen, which, along with clamps, are also responsible for tightness. For insulation of the room, both semicircles should be turned to the street, which will increase the pressing of the sash to the frame.
• The same strips can also be used to reverse windows setting when warm times have come. Turn the semicircular mechanisms to the room, there will be a small gap between the flaps, which is necessary to move the air masses between the apartment and the street.

Innovative settings - the most interesting developments

Innovative low-emission glass is becoming increasingly popular. They are distinguished by a greater value, but significantly exceed their competitors in terms of durability, durability, reliability, beauty, thermal and sound insulation. Feature of these plastic structures is three-chamber glass, due to thermal energy Stored by 70 percent better in comparison with other plastic structures.

Some believe that low-emission windows are not intended for use in hot weather due to preservation large number Energy within the apartment. However, this is not at all as they reflect perfectly sunlight, creating indoors necessary level COOL.

One of the interesting developments is a climatic valve. It is enough to establish a similar mechanism to significantly simplify the setting of plastic windows to winter with your own hands. Due to the valve, a remarkable level of ventilation and circulation fresh air In summer, as well as tightness and thermal insulation during winter frosts.

The windows setting does not represent a special difficulty. You will not need any special tools, you only need to carefully and carefully adjust the clamping mechanisms without damaging the rubber seal. After spending an hour of free time, you will be pleasantly surprised by the result, which will especially be noticeable in the winter cold evenings.

The PVC windows are found in many homes and apartments, as they are convenient to operate, protect against skimmer and have aesthetically attractive appearance. It's important to know, how to adjust plastic windowsif you want them to serve for a long time. You can do this if you follow the instructions and use a special tool.

The most common breakdowns, it is:

• when closing the sash in the side and lower part in contact with the frame;
• the need to replace the bar for locking;
• bad fit of the sash;
• bad turn pen;
• failure, or lock the window handle;
• open sash during locked mode and open window;
• closed sash, with an unforeptant window and not working handle.

How to regulate plastic windows yourself

For adjusting window accessories need:

• special hexagon with a diameter of 4 millimeters;
• "Stars";
• pliers;
• twin 2 species (cross, flat).

Adjusting all plastic windows sash occurs from three sides. This makes it possible to achieve the right position around the perimeter, in the sash, and also helps strengthen the sealing seal. Methods for adjusting the work of the accessories and elements of plastic windows set, so you can choose the most optimal one for yourself.

If when closing the plastic window, the sash comes into contact with the bottom of the frame, the sash is directed upward towards the loop. For adjustment, the sash is sprinkled. From left to right to the hexagon in several revolutions (3 - 4) turns the screw, which is placed in the end of the sash next to the top loop. To configure the fittings of the plastic window vertically, the sash must be closed. With a loop, the protective cap is removed below. It is done 3 - 4 turns of the hexagon from left to right.

If the sash with lateral closure concerns the frame, the sash must be taken to the hinges. The side of the sash when touching the bottom of the frame will be covered with a screw for adjusting to the loop below. The adjustment of the horizontal accessories is needed when the side of the sash comes into contact with the frame, in this case it translates up towards the loop.

When the wear of the slats is checked, the window opens and inspection is carried out. Comable option is the location of the bar on the perimeter from all sides. With the wear of any strip, irregularities appear in the landing of the window sash. To correct this, the sash opens, top and bottom from the bolts for adjustment, the caps are removed, the bolts weaken. The screw is adjusted to the window position from above. Regulated left and right, bottom, upper location.

On the end part of the handle sash there is a system (regulators) of eccentrics. It regulates the degree of fit of the sash. The type of systems depends on the company installed windowThe principle of work is always similar.

Watch the video: How to independently adjust plastic windows

When setting up the TsAF, the eccentrics scroll through the hexagon. They help in adjusting the degree of contact of the frame and sash. In the heat, the adjacent of the sash should be weakened, and in cold period - reinforced. The screw in the bottom loop is made adjusting the degree of contact of the window sash and loops.

To adjust the touch with a folding and with a rotary flap, a loop is used at the top. The bolt is placed on scissors near the top loop. Opens casement. A special block is pressed. The handle must be put on the ventilation. For tight fit of the sash, the bolt spins from left to right. Fittings can be adjusted near the handle.

For high-quality fit of the sash, the plank shifts towards the street. On the frame there are mechanisms for clamping (from the loop side), which allow you to adjust the accessories of the hexagon. The sash contact completely depends on the degree of tongue nomination.

Useful video: adjustment of metal-plastic windows and doors with their own hands

So that the mechanisms are not spoiled, the handle moves when the window is closed. To protect against the movement of the handles in the open position window, window blocks are provided. They are located in the end of the sash under the handle. Before removing the blocking, the window block is pressed.
If the sash is in a closed position, and the window cannot be closed, the knob does not move, the block requires adjustment. The sash with a screw under the loop from the bottom shifts to the window blocker. The mount is done weaker, a metal plate is inserted between the blocker and the frame.

If the handle is broken, it requires replacement. For this, neatly back the pad stretches, it shifts 90 degrees. Screws are unscrewed. The broken handle is removed. Another handle is put. Enchanted pad.

A frequent problem of bad turn handle is a bad or complete lack of lubricant in the fittings. For the avoidance of this problem, the mechanism 1 time per year is covered with any aerosol lubricant. During the inspection, it is impossible to forget about the inspection of sealing gum.

All adjustment works are quite possible to make himself if you make a little effort. If there are doubts, you can call a specialist and reduce time, but to spend money. How to regulate plastic windows yourself We offer to look at the training video. Try to perform work on home yourself, then you can save your budget.