How to make a brazier from a car disk. How to make stoves and barbecues from machine disks with your own hands A hearth from a car disk

Made brazier, oven, barbecue. a smokehouse made from car disks is an example of how waste materials can be reused for useful and desired design. These from rims are made quite simply, they can be made by hand in the garage or in the home workshop. Although the design is simple, such a product can be used for many tasks.

How to make a brazier from rims

For self assembly of this design from auto disks, we think in advance what the scheme of our product will be. We are preparing consumable in the right quantity, as well as a list of tools. To do the job efficiently, you need to be able to use a grinder to cut metal, and a welding machine.

A simple option - barbecue for skewers

More complex brazier models with a grill grate

How the barbecue oven works:
Downstairs we put firewood or cooked coals. A grill is placed on top or skewers are stacked. We can also place dishes on the grid or directly on the wheel, if the size is suitable. Thanks to the heat that rises, you can cook food in the same way as a regular barbecue. If we want to smoke products, then we close the exit at the top, we look for the wood chips to smolder - smoke should form. In each case, an individual design is thought out, depending on the needs of the owners. However, when assembling a fixture, the basic design principle is the same, regardless of the model.

Smoking chamber from car rims

Brazier from disks will be more profitable if it is adapted for various tasks. For those who prefer homemade balyk and sausages, a smokehouse is recommended, which will serve as a device made of disks. Such useful thing is made using at least two units of material.

The work is built on the principle in which two disks are connected to form an integral hollow structure. The upper part is modified to make it convenient to fry kebabs - as in the previous model. However, in order to keep the smoke, a cover and a chimney system should be equipped. The partition with holes can be left, which will be easier. In this case, the device can act as a cooking surface.

To fix the door, we weld a nut onto it so that they are symmetrical with respect to the weld. One bolt is also fixed to the brazier by welding in such a way that the door nuts are put on them. After that, the grill is ready! Now you can enjoy the cooking process and the dishes themselves.

Ideas on how to create a brazier, barbecue, oven from car wheels with your own hands

The ability to adjust the height of the cauldron on the rack above the disk.

With elements of forging barbecue grill

brazier from a disk on legs.

Barbecue from a rim and a skewer.

Hanging original brazier.

The wheel disk for a brazier-barbecue is taken from a truck.

"conjures up not only images of beds, a garden and a lawn that needs to be mowed, but also memories of a pleasant stay, fresh air, barbecues and friendly gatherings around the fire ... Here, of course, everyone presents their own version: a simple fire made of firewood in an excavated earthen pit, a chic country fireplace or a gazebo with barbecue facilities.

Most summer residents try to use imagination and improvised means to make life more convenient and comfortable. Many at one time adapted car rims for frying kebabs. By themselves, they do not look very aesthetically pleasing, and, despite all their advantages, they are not very convenient to use. But it is possible, using this good idea and skillful hands, to make a comfortable hearth, where you can safely sit with children, communicate comfortably and cook delicious and fragrant dishes with pleasure.

First of all, you need to decide on a place for the hearth. For the comfort of vacationers, it is possible to provide for the presence of benches around it.

After the place is chosen, it is necessary to carry out the markup. Put the disk in the place of your choice, step back the required distance from its edges, taking into account the size of the facing stone and the gap between the disk and the masonry for air circulation. In this version, about 30 cm.

Start building the foundation. Remove the sod to a depth of about a spade bayonet along the marking line. Make a sand cushion and spill it with water for better compaction.

Return the disk to its place, mark the center with a pin or stick, mark the borders of the disk for the manufacture of the supporting foundation itself. Lay bricks in two rows along the edges in a circle.

We level the inner wall with cement.

The cavity between the foundation and the edges of the pit is filled with mortar with the addition of broken stone, crushed stone, etc. We level the solution. Let the foundation dry.

Now the most interesting part of the work begins - the creation of the hearth itself. The author used colored facing bricks.

The disk was installed in its rightful place to make the distance for the air gap uniform. For air to enter in the first row of masonry, a blower was made.

From above, the masonry and the distance between it and the disk were covered with limestone, while leaving a small distance so that, if necessary, the entire disk could be reached.

The author also welded small pieces of the profile (about 10 cm) to the disk to install skewer or pot holders in them. Painted them with heat-resistant paint against corrosion. Great solution a removable grate has also become, which will allow you to freely clean the hearth from ash.

When I bought my SUV, I discovered that there was a “killed” spare tire in the trunk (they forgot to tell me about it before buying). I didn't know what to do with her and left her lying in the trunk until one day it occurred to me interesting idea- make a brazier out of it. I didn't know how to weld metal, so I had to get creative, making sure that any components used for assembly could withstand the heat (i.e. no nickel or zinc plating).
Here is a list of tools and materials that I personally used, but this project is easy to adapt to individual individual preferences. The base can be made from wooden pallet or other lumber, and if you have no desire to make it at all, then the brazier can be poured with concrete, and the height can be adjusted using a piece of pipe of the desired length. In general, there are many options.
Tools:

Sander.
Miter saw.
Electric drill.
Planer (optional).

Material:

rim
High temperature paint - 2 cans
Bars 100x100x2500mm
Bolts M16 - 4 pieces
Set screw for wood M12 - 4 pieces
Steel pipe with a diameter of 48 mm - 450 mm in length
Threaded rods M12 - 2 pieces
Grill ( various sizes) - 1 or 2 pieces
Wheels - 4 pieces

The hardest part of the job

Without a doubt, this is the most unpleasant part of the job - removing the rubber from the disk. After watching a few videos and trying to do everything according to theory, I ended up just taking an electric hacksaw, cutting the bead of the tire, and then somehow removed it with a hairpin and a long screwdriver.
After removing the rubber from the disc, I took it to the local sandblaster, where I was allowed to process it myself. In time, it took about 11 minutes, and cost less than 600 rubles (800 rubles if the work is done by the master).

Details and painting

I purchased all the necessary components from a local hardware store. I bought a pipe and cut it there. Pipe flange to be installed on wooden base, you do not have to modify, because here we will use set screws desired diameter. But the flange that will attach the disk to the pipe should have holes of a slightly larger diameter (they will have to be drilled) so that bolts with a wider head fit into it.
Next comes the painting. Personally, I used a special Rustoleum High Heat paint. The coating is applied according to the same principle as with any other spray paint. I painted all the details in two layers. I wrapped the wheel bearings with paper before painting so they wouldn't clog with enamel.

Preparing the foundation

The disk itself is quite heavy, so the base must also be quite massive. I wanted to make it the same weight as the disc, while still being compact, so I decided to use 100x100mm bars. I cut them with a saw so that the base ends up square.
I then drilled holes in the ends of the bars using a pre-drilled wood guide plate. Ideally I would like to use drilling machine so that the holes are exactly the same, but since I did not have one, I took conventional drill. I then threaded the threaded rods through the holes and then sanded the finished base.
Then I put gaskets on the threaded rods, twisted the washers on top and cut off everything superfluous with a grinder. After that, I drilled (and sanded) holes for the set screws on the top and for the wheels on the bottom.
In the end, it remains only to cover the base with impregnation and a layer of protective varnish.

We connect the disk, pipe and base

To fasten the pipe flange to the disk, I used plain head bolts (the widest possible diameter). It is necessary to make sure that the bolt heads touch the central rim of the disc. It may seem that this mount is rather weak, but as soon as I tightened the nuts, it became clear that the design does not give backlash. I closed the hole in the pipe with a special plug to fit the size so that the ash did not get inside. I also treated the cap with high temperature paint.
The pipe is screwed into the flange from one end, and into the base flange from the other. The base flange is fixed with bolts and washers. I also covered them with paint.

final chords

I used the valve hole on the disc to attach a hook to it, after which I attached a carabiner to it - you can hang various auxiliary tools on it (tongs, brush, spatula).
Finding grills of the right size proved to be problematic, but I searched the Internet and found the right options. One grill should be compact enough to fit inside and hold charcoal, and the other wide enough to fit on top and hold food. In principle, one grate may be enough, since coal can be stacked directly on the metal of the disk (only if it is stainless steel or ordinary steel, and not zinc or galvanized metal), but I thought that coals could fall out through the holes from below and spoil the wooden base.

Conclusion

I liked both the functionality and appearance the resulting mangal. As a person who has not yet learned how to weld metal (but would very much like to), I aimed to create enough robust design with the help of improvised means, and I think I succeeded. And also, if you remove the wheels and turn the grill upside down, you can get a pretty stylish table.
I hope you enjoyed my tutorial and find it useful!

The thick and strong steel of the disc is suitable for a variety of products, but oven models are best obtained. stove from car rims, created by one's own hands, is the pride of the master. The availability of this high-quality material also plays an important role - a heater or barbecue made of discs will cost quite inexpensively, and will last a long time. It remains only to turn on the imagination and start interesting and useful work.

Rules for working with disks

It is easy to verify that the discs are suitable for ovens using simple experience . To do this, you need to heat a piece of one of them, for example, blowtorch. Hot metal does not emit any odors and can withstand temperatures up to 900 degrees.

It's important to know! From automobile disks, it is possible to build flame burning furnaces for the use of solid fuels. And no others!

When machine disks are stamped at factories, they do not expect that any additional details, therefore, when working, it is necessary to adhere to certain rules:

When using welding, make the seam of high quality! There should be no visible defects.
At one time, only two parts can be welded, and not the entire structure as a whole.
After each stage of welding, the metal must be given time for the internal stress to drop - 3 minutes for each kilogram of the mass of two welded parts. Simply put, you can continue welding if touching the seam does not burn.
The finished furnace is kept for a day, and then tested for full power within 3 hours.

If during the test run and firing, small defects in the weld are detected, then they are eliminated after the furnace has completely cooled down, and the run is repeated in a day.

Potbelly stove for a bath

Such a stove is suitable for use in small rooms, for example, in a bathhouse or garage. For its manufacture, wheels from a truck of the KrAZ-255B type are needed. You can use wheels from UAZ or GAZelle.

The oven from car disks perfectly performs the function sauna stove and will be portable. For its manufacture you will need:

a metal sheet;
disks;
pipes with a diameter of 100 to 150 mm;
a branch pipe of small length, with a diameter of 76 mm.

The hardest part is removing the inside. The metal of the disk is quite thick, so it is better to use a gas cutter. You can do this with an angle grinder, but the work will take longer.

The disks are hermetically joined and welded together with a strong seam. The back of the resulting body is closed sheet metal, a chimney pipe is welded to it. A damper is installed inside the pipe to regulate draft.

If the furnace is equipped with an air supply adjustment, then a damper in the chimney is optional. Just insert a pipe with a damper into the door. The damper axis is spring-loaded.

A plate is placed inside the firebox, which will divide the space into two parts. The secondary chamber with a welded chimney pipe will be located on top.

Such a furnace can be of any diameter and length.. Orientation in space - vertical or horizontal. The Buleryan design is taken as the basis.

Design for a cauldron

Another product from car rims, easy to perform. Bottom - out sheet metal or cast iron insert for conventional oven. Legs can be welded if desired.

For the design, two disks welded together are used. A firebox door is cut into the body. The cauldron is placed on top. No unnecessary details and great functionality. Everything ingenious is simple!

The same oven can be used as a grill if you install a grid or grate on top.

Brazier for a summer residence

This product deserves special attention. It is simply impossible to imagine a dacha without a brazier, and a brazier made from car disks is a strong, durable, functional, inexpensive and quite nice design element.

The advantages of such a grill include:

In fact, the autodisk brazier is a universal hearth for cooking. The principle of its operation is very simple: coals or firewood are loaded into the furnace, and food is cooked on top.

Wood chips are used for smoking, and the top exit is closed. Meat and fish are smoked hot.

The design may be individual, but the principles of its manufacture are common to all.

Product Models

In the manufacture of barbecues, simple and complex shapes. You can make it in the form of such models:

Simple grill. Capacity for coals - a wheel. A fire is made inside, skewers or a grate are laid on top.
Double model. Consists of two wheels. Higher than the first option, you can put a cauldron on top.
closed oven. It is distinguished by the presence of a door that is tightly closed when smoking products.
Universal model. Combines all possible functions. Additionally, you can install a chimney.

The brazier can be with legs or without them. A simple grill needs a stand, but in double and triple designs, this function is assigned to the lower disc.

The order of work in the manufacture of a simple grill:

AT skillful hands it will turn out to be a useful and cute thing. Possessing the skills of welding, you can make any model of the furnace from old, useless disks. As they say, cheap and cheerful.

Car wheels have always attracted the attention of craftsmen. More often they make stoves, smokehouses, barbecues, feeders and other devices needed in the country. But it is the stove and barbecue from car disks that are considered the top of the use of these products. Let's talk about them.

Source topgir.com.ua

Disc Information

Firstly, it is a product made of thick, durable and resistant steel. For grills and stoves best material- boiler steel in sheets, which is very expensive. Ordinary carbon steel burns quickly.

Of course, no one rations discs for heat resistance. But in terms of corrosion resistance, they have no equal. In addition, this special steel does not emit odors and harmful substances when heated.

But, when collecting a brazier from disks, you need to know not only the positive characteristics of the material. He also has disadvantages. The most important thing to pay attention to is that welding work with this material must be carried out with great care. The thing is that in the design of automobile disks, welding is used in minimal quantities. In this case, the welding site is necessarily subjected to a “vacation”, relieving stress inside the weld.

It is clear that for barbecues this is not the biggest problem. But if the task is to make a furnace from disks, then this moment must be taken into account.

Therefore, attention! To make mining furnaces or units from automobile disks long burning, or on pyrolysis technology, is impossible. Because the weld will not withstand high temperatures and will crack.

Source italkovka.ru

As for solid fuel stoves that can be used in the country, in the garage and others utility rooms, there are no restrictions. The main thing in the manufacture of pay attention to some points:

the welding seam must be free of visible defects;
only two mating parts can be welded in one pass;
after welding, the metal must be allowed to rest in order to remove residual stresses inside;
a day after welding, the furnace is subjected to a run, that is, it is melted for 3 hours;
if defects appear in the seams, then they are repaired after a day of cooling by welding, but they are melted only after all the same day.

So, what is a car disk, no need to say. Making a brazier out of it is not a problem, because the product itself is already practically finished construction in which meat can be fried. The only thing that needs to be done additionally is to form a support for the skewer or meat.

Let's look at the brazier from car disks in more detail.

Source handmade32.ru

Brazier for a shish kebab from a disk

Let's start with the fact that the brazier itself is a product of an in-depth form, where coals are kindled. And skewers or a grill are installed on top. The shape is a parallelepiped. The car disk has a round shape, hence the problems with installing the skewer. That is, if you put the kebab sticks in a row, then in the center they will be located in full length, at the edges, due to the rounding, the area where the meat is located is greatly reduced.

It turns out that the central skewers will have to be filled with more mass than the outer ones. And if this is not a problem for you, then the brazier from rim has a place to be in your country house.

You can solve the frying of meat in a different way. To do this, you will have to make a round lattice from heat-resistant wire. Its diameter should be equal to the diameter of the disk itself, or rather, inner diameter rims. In fact, this design will resemble a barbecue. It is not necessary to weld pieces of wire together. They can be glued with special heat-resistant glue.

The brazier itself can be installed on legs of the required height, a canopy or a hinged lid can be installed. That is, there are many options for improvement, show your imagination.

Source navserukimaster.ru

On our site you can find the most popular - from construction companies presented at the exhibition of houses "Low-rise Country".

Oven from a car disk

Some of the nuances of making a stove from a disk have already been mentioned above. But I would like to add a few more important points:

From the hearth of the stove or the upper surface of the grate, that is, the places where solid fuel is ignited, to the roof of the unit, from where carbon monoxide will leave the furnace, a distance of 40-50 cm should be left. This is provided that dry, conditioned fuel is burned inside the furnace. If the stove is ignited with waste fuel, then this distance will have to be increased to 80 cm. The reason is pyrolysis gases, which, when in contact with a cold surface, immediately burn out, leaving soot. Such soot will eventually reduce the efficiency of the heater.
Optimally - if the stove from the disks of the car is equipped with a grate. Firstly, this is the formation of an ash pan, that is, a place where ash from burnt wood or coal will fall. Secondly, the ash pan will additionally perform the functions of a blower. If the sand is made in the form of a horizontal structure, then it makes no sense to install a grate in it.

Source i.ytimg.com

It is clear that furnaces can perform different functions. For example, this is a cooking appliance. Or a unit that is used for space heating. And the third option, often used by summer residents, is a combined model, that is, for both cooking and heating.

A common design is a stove made from car disks for a cauldron. The shape of the disc itself contributes to this choice. But not only. For example, high sides create reliable protection from the wind. The large mass of the product is a guarantee of high stability of the structure, which is an important characteristic.

But precisely round form The furnace creates a uniform distribution of thermal energy on the walls of a round cauldron. For example, in a square-shaped firebox made of bricks, heat is lost in the corners. Plus, right there in large quantities soot is collected. In addition, junk fuel is often used in dachas: lumber waste, tree branches, wood chips, and so on. Such fuel is so-so, it is raw and burns with the release of a small amount of heat. It would be felt in brick ovens, but not in a car disc oven. Here everything will burn to the end, highlighting a large number of warmth.

Source pp.userapi.com

On our website you can find contacts of construction companies that. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

All this will happen just like that if the furnace itself is made correctly. After all, its design is two discs stacked on top of each other and welded together. And if the smoke hole is made on the side, then, for sure, all the smoke will go through the least resistance - through the upper technological hole. This is where the flames of fire will come out. And even if you put a cauldron on this hole, the food in it will burn quickly. In this design, it is better to cook dishes that are languishing. To do this, you will have to warm up the unit slightly.

But if you need to fry something, then the design of the oven will have to be slightly modified. More specifically, make minor changes:

make the technological hole larger so that the cauldron does not close it tightly;
make the firebox door so that it, on the contrary, closes tightly.

A stove for a cauldron made of disks, although it is considered a good option, is still not an ideal design. Too much heat loss through steel walls. In this plan brick oven better.

But if you want to make a barbecue, then the best design can not found. The whole point is that thermal energy open fire distributed unevenly when the top of the stove is open. In the middle, the temperature is always higher than at the edges of the disk. Therefore, by installing a grill on the rim, you can cook different dishes at the same time. This refers to meat. In the center you will get a piece fried to a crisp, at the edge you will find meat with blood.

Source stroy-podskazka.ru

But here you need to understand that it is better to use discs with the minimum amount technological holes. For example, from the Gazelle.

Someone is trying to make stoves without furnace doors. An inconvenient option, because firewood will have to be thrown into the combustion chamber through technological holes in the hub. In addition, this design is very "gluttonous".

Video description

The video shows a stove for a cauldron made of two car rims:

Potbelly stoves from disks from a car

For heating small spaces oven-potbelly stove from car disks - perfect option, provided that there is waste fuel in enough. Because she "eats" it in large volume.

But there is also a serious positive characteristic – thick metal, which has a high heat capacity. That is, after heating and turning off the fuel supply, such a stove still gives off heat for a long time. Accordingly, it also has a high efficiency.

A horizontal design works better than a vertical one. But the former are bulky structures, so many give their preference to vertical models. It is better if you use disks from large trucks. Potbelly stoves from large discs can be equipped with a water jacket. Fortunately, the corrosion resistance of steel allows this to be done.

To increase heat transfer, the potbelly stove can be equipped with steel strips that are welded along the body of the device. It turns out a kind of heater. If you want to increase the heat capacity, then the stove must be lined with fireclay bricks.

Video description

The video shows the manufacturing technology of a potbelly stove with a shirt made of car rims:

Sauna stoves

Brazier from a rim - the design is simple. This can be said about the stove for the bath. The main thing is to make it right. Here, most likely, we need to talk about the heater, and not about the stove itself in the truest sense of the word. Because for a bath it is optimal - a brick oven with high heat transfer and heat capacity. But if you put a car disk on it and fill it with stones, you get an excellent design for a steam room.

To this design, you can additionally install a water tank on the chimney, which is also made from car disks. True, the structure turns out to be bulky and heavy. But if everything is accurately calculated and reliable supports or fasteners are made, then the structure will last for decades.

Source baniwood.ru

Combined design

There is another version of the furnace, in which, in addition to car rims, they use steel pipe diameter equal to the diameter of the disks. It is it that is installed between two disks, holes are made in it for the firebox and the installation of the door. The design is obtained with a high firebox.

It should be noted that this option does not differ from the above in terms of design features. It's just that this furnace makes it possible to expand the combustion zone, increasing the power of the unit itself. Like previous models, such stoves can be horizontal and vertical.

The only thing you need to pay attention to two points:

The wall thickness of the pipe must not be less than 6 mm.
Welding of disks and pipes is carried out according to the rules described above.

Source i2.wp.com

Conclusion

You can make a brazier or stove from car wheels without any problems. But it is necessary to correctly approach the solution of purely technological problems associated with the welding of parts. And if everything is more or less simple with barbecues, then with stoves this moment should not be missed. Incorrectly made penetration can cause poor quality of the weld, through which carbon monoxide will penetrate into the premises.