How to choose a stove for a bath depending on different criteria? Bath furnace with your own hands: Installing metal furnaces and bricks What to choose? Requirements for wood bath stoves

The selection of a bath furnace is the most responsible process. The main criterion is power. The calculation must be correct, it is important not to be mistaken. If power is insufficient, the bath will warmly and quickly cool. If you put too powerful boiler, it will not be possible to go there. There are other selection criteria. How to pick a stove for the bath right?

Power stove

Power is selected on the basis of the calculation, the content is given below. To carry out the calculation, measure the main dimensions: length, width and height. To obtain a clean volume of the bath, it would be enough to simply multiply these numbers.

However, it is so easy to allow an error. How to make a difficult choice - pick up a stove for a bath? When counting the volume you need to make the following adjustments:

• Usually in the steam room makes the most efficient thermal insulation. The walls first inspire, only then they are trimmed with finishing material. It is customary to use thermal insulation with a foil layer, which reflects heat back to the bath. The problem is that when the finished log house is ordered, heat insulation is often neglected. It is permissible, but it is worth considering that the tree is a very heat engine material, its thickness - from 20 cm. Part of the heat will go to heating the logs themselves.
• If the furnace part of the stove is submitted to the pre-banker, it is "Break" in the heat insulation. It is necessary to take into account this in the calculations.
• Doors and windows must be carefully insulated and tightly fitted. Otherwise, this is also a fate.
• If there is a ceramic tile, brick, natural stone in the bath finishes, part of the heat will go to their heating.

Just considering all the above, you can correctly calculate the volume that will have to heat the device and choose which stove in the bath is better. To take into account all these parameters apply the correction factor - 1.2 m 3 per 1 m 2 poorly insulated or absorbing heat surface.

Example: The steamer has a size of 2x3x2.2 m. There is no insulated window 0.8x1.2 m and the door is 1.8x1 m. Calculate the volume: 2x3x2,2 + (0.8x1.2 + 1.8x1) x1,2 \u003d 13.2 + (0.96 + 1.8) x1.2 \u003d 16.5 m 3. We take power: 16.5 m 3 x 1 kW ≈ 17 kW. note that 13.2 kW ("Clean" volume) We would not enough.

Additional selection criteria

Power is the main criterion, but not the only one. What are the furnaces for a bath? That the result is fully consistent with our expectations, you need to take into account the following:

• material material;
• firework design options;
• pair type;
• various designs;
• kind of heater;
• work time from one fuel refueling;
• features of bath warming;
• what fuel is used.

Just considering all this, you can determine which stove to the bath is better.

Material of manufacture

Bath furnace can be made of:

• cast iron;
• become;
• brick.

What stove in the bath is better if you take the material of manufacturing? Compare them between themselves is not entirely correct. Each material is better solving this or that task and, according to experts, creates a special atmosphere.

With a modern assortment of furnace equipment, experts give the palm of the championship with special heat-resistant doped steel with the addition of chromium. It is steel, today, is the most reliable and durable. The atmosphere in the bath does not suffer. Such furnaces do not burn oxygen, since when burning in them there is no oxidation process.

When choosing reliable bath stoves, the site website recommends paying attention to Finnish companies. They deservedly occupy a leading position in this market. Their products have one drawback - a high price. Although, the same "Harvia" produces rather budget models.

Harvia Bath Stove

The production of cast iron stoves today is not particularly popular. The lack of a cast-iron furnace is a lot of weight and shorter, compared with the previous version, service life. Heating is slower. It is worth considering, deciding which stove to choose for a bath.

Cast iron stoves today are not partable popular

Selecting a brick furnace - tribute tradition. Install such very laborious. There were not many good masters before. Now - you will not find at all. You can try to build a stove yourself, but is it necessary? This work is not simple - you need to properly build a foundation and chimney, and the result will clearly give up to modern industrial samples. Brick requires more energy to warm up, so fuel consumption will increase.

At the same time, although such a stove and will rush longer, it will be much longer and give warm. It all depends on your financial capabilities and personal preferences - sometimes, such a stove is a good choice.

The brick option is long, expensive, difficult.

Features of the layer location

The furnace can be located in a closed steam room, but it is much more convenient when it is remote. This complicates the selection of a cast-iron, steel or brick furnace. You can add fuel at any time without interfering with those who are in the steam room. It slightly reduces the thermal insulation of the bath, but not critical. The new thermal insulation of all adjoins and seams will solve this problem. But the door to the steam room will open less often.

The new coat of firebox, made of heat-resistant glass, will allow you to follow fuel consumption. The remote firebox itself must be made of thick heat-resistant steel with the addition of chromium. Such a design is an indicator of quality, will not progrit for years and will withstand the highest temperature.

Para

First we will deal some couples. Distinguish:

• Dry steam is most useful for the body. Stones are heated to +500 0 S. It is worth splashing on them warm water - it instantly turns into steam. Such a couple evenly warms the entire bath and does not increase moisture.
• Wet steam - arises as a result of boiling water directly in the bath. Hot water is also heated by a heater that is equipped with a water tank. This method does not require the supply of hot water. For washing use water directly from the boiler. She is a heat exchanger.

How to quickly choose a stove for a bath in that case? Fans of wet steam can organize a similar process in the sauna. For this there is no need to put the boiler with water. It is enough to buy a special device, which will produce steam. The principle is the same, only works steam generator from electrical energy.

Requirements for construction

When choosing a furnace in a bath, you need to take into account the requirements for the stove design. She must:

• provide gradual and uniform warming of the bath;
• heated the room to +80 0 C (under the ceiling) for 3 hours;
• ensure proper fire safety;
• eliminate the likelihood of smoke and soot in the bath;
• preheat stones up to +500 0 s;
• ensure convenience of operation;
• have aesthetic appearance.

Type Kamenka

What should be a stove-heater in the bath? There are two types of heaters:

• open;
• closed.

What are these types of bass furnaces from themselves?

Open - heating the air of the room directly with heat, which is given to stones. The most optimal option for frequent visits. This option is often used for individual use. Quickly heats the bath, but also quickly and cool. It is needed in the country area.

Closed - deciding which furnace to install in the bath, pay attention to the stove having a damper that closes the top layer of stones. The room will warm up more evenly, due to convection. Fuel - spend more economically. There is also a reverse side of the medal - to start trample the bath will have for 3-4 hours.

What kind of furnace to put in the bath, considering the type of heaters? Here everyone chooses himself. Their pros and cons. We looked higher. But by experience, let's say, it is better to use stoves with a closed heater.

Duration of work on one fuel bookmark

Another important characteristic - how much will work on one fuel laying. The longer, the better. For example, the efficiency of a conventional brick furnace is about 85%, and the ovens implementing the long-term combustion technology due to the pyrolysis process - 91-95%. Accordingly, the second option will work more efficiently. The efficiency of the efficiency is needed to use the fuel as rational as possible, the amount of which can be different.

The furnace can work not only on solid fuel (firewood), but also on gas, liquid fuel, from electricity. In each case, you need to calculate the optimal option. The source data is individual. Accordingly, the result will turn out for each one. Choosing a stove for the bath, consider the characteristics that the manufacturer pointed out in the passport. If you decide to make a furnace yourself - calculate in advance and appreciate the possible efficiency.

Standard brick oven on firewood, with remote furnace, will burn for about 4 hours. Long burning technology will increase this time up to 30 hours.

Features of the premises of the room

There are two options: hot and cold. Hot - the walls of the furnace, heating more than 100 0 s, warms the entire room. Cold - the walls of the furnace are isolated and not heated above +40 0 C. Warming up the room comes at the expense of special channels in which air circulates. Each method has its pros and cons.

Hot - quickly warms the room, but there is a possibility to get a burn. You must arrange a protective screen of bricks.

Cold - more secure, the bath warms up more evenly and cools longer, but the process takes longer.

Type of fuel used

The baker for the bath can work almost on any kind of fuel:

• natural gas;
• solid fuel (firewood);
• wood processing products (pellets from pressed sawdust);
• liquid fuel;
• electricity.

Classic option - bath on firewood. Experts claim that no other type of fuel is capable of creating such an atmosphere. In modern conditions, this statement is quite controversial. Modern manufacturers with high rating offer analogues working both on gas and electricity. According to technical indications, they are not inferior to furnaces on firewood. Gas is the cheapest type of fuel, and the cost of firewood is steadily growing. The main thing is not to be mistaken with the choice.

Choosing a wood-burning furnace

When choosing a good wood stove, you should pay special attention to the following factors:

• design features;
• principle of operation;
• manufacturer (more precisely, its rating).

Design features

The combustion temperature is high so that the furnace does not boost, it must be made of high-quality metal. Turn the furnace will have at least 3-4 hours. It is worth remembering that the following elements include in the design of such a furnace:

• Solnik - used to remove combustion products (ash).
• The furnace is different designs. Most preferably put the elongated, which will allow you to install the furnace in the wall so that the furnace is in the adjacent room. Metal thickness should also be sufficient.
• Gas burning gas - used in pyrolysis of long burning boilers. Allows the oven to burn to 30 hours on one fuel tab.
• Kamenka - directly heats the air in the bath.
• Chimney - serves to remove gaseous gorgeous products.

The need for an additional foundation device and the complex design of the chimney led to a decrease in the popularity of traditional wood-burning stoves from the brick.

Principle of operation

On the principle of operation of the furnace on firewood divide on

• long burning;
• periodic burning.

The advantages of a long-burning oven are obvious: this is saving fuel as a result of the pyrolysis process. Constructive feature - the presence of a chamber of the gases obtained as a result of pyrolysis. The disadvantage is the formation of soot. It is not recommended to pour water on stones, which, by the way, is needed much less. Otherwise, it is possible to release soot into the bath. The heating temperature of the stones is not higher than +350 0 C. But, fuel economy can be up to 500%.

In the furnace of periodic action - the stones are heated by open fire to a temperature of about +500 0 S. Sozha simply burns. You can safely pour water on the stones.

Manufacturer

Furnaces and Swedes are confidently headed by Finns and Swedes confidently. Such manufacturers like "Kastor", "Harvia" and "Helo" (Finland) and "Tylo" (Sweden) are especially popular. Russians are not yet somehow confidently compete with these manufacturers.

Choosing an electric furnace

The main feature of the electric furnace is a constant need for electricity. If a standard 220V network can be used to 7 kW, then over 7kW will require additional lines of the line in 380V. Not always and not everywhere it can be convenient, and, and, in general, maybe. The new furnace for a bath can do too expensive.

Advantages of electrocamers

The benefits are obvious:

• do not require the construction of complex structures (chimney, foundation);
• can be installed in almost any bath, where there is electricity;
• safety;
• a closed system with a heat exchanger is possible;
• durable, stainless steel;
• ease of operation.

Basic selection criteria

What electric oven is needed in the bath? Criteria for the choice of specialists Standard:

• the presence or possibility of supplying the required voltage;
• power heat exchanger;
• the price of electricity in a particular region.

Selection of a gas stove

Gas furnace completely eliminates any independence. This is a source of increased danger, so installing and connecting work can produce specialists with appropriate tolerances and licenses.

Benefits and design features

Natural gas is the cheapest fuel. This is its main advantage. The efficiency is the highest, when using low-temperature equipment, up to 109%. This is exactly what explains the high popularity of this equipment.

However, natural gas is far from everywhere. This is the main drawback.

Choose a furnace for a bath on a gas - check the following:

• The burner of the modulation type. Such a burner automatically selects the optimal mode of operation, depending on the specific conditions. This allows you to maximally reduce the negative effect of the fuel unlikely.
• The coolant (hot water) must be warm up to +70 0 The temperature of the gas should not exceed +110 0 C.
• Use coaxial chimney.
• Have a gas recirculation system.

Under such conditions, the efficiency will be maximal.

About gas-wood ovens

There are modifications that can work both on gas and wood furnaces. This allows you to simultaneously solve several problems at once:

• improves the convenience of control;
• in the absence of gas, you can use firewood.

Installation requirements

Only specialists with all necessary licenses and permissions admit to the installation of gas furnaces. All fire safety standards must be met.

Output

What bass oven is better to choose for a Russian bath? It is impossible to give an unambiguous answer, but it is worth stopping the choice between wood and electric stoves, because Gas is not carried away everywhere. Further, the main criterion for choice is the power of the furnace. We led to the calculation formula above. The remaining parameters depend on your desire and wallet.

True defining the initial data, the selection of a furnace for a bath in parameters is not difficult. All characteristics are indicated in the product passport. Among the manufacturers, the first place confidently hold Finns, offering, including quite budget systems. The presence of a Russian-speaking site and the design of the body also affect the choice, which is not so small, as I would like.

← Previous article Next article →

Pluses of wood stoves:

• savings on gas pipes or;
• firewood can be easily purchased or prepared independently;
• wood fills the room with a pleasant aroma;
• a wide range of models.

Cons of wood stoves:

• erection and periodic cleaning;
• the steam room will warm up for a long time compared to the furnaces operating on the other;
• systematic ulteric cleaning;
• firewood will have to constantly throw up so that the warming process does not measure.

Gas baths

This type of furnaces is characterized by the presence of a thermostat and gas fuse. Well, of course, the gas source is either a main gas pipeline, or a balloon gas.

Gas furnaces speak the following advantages:

• compactness (no ash bar and furnaces) - respectively, such a furnace can be installed even in a small pair;
• no need to constantly monitor the presence of fuel (for example, the firewood will not have to register regularly);
• you can independently adjust the temperature (put up comfortable, and it will be maintained in the steam room);
• fast warming with small gas costs.

Minuseslittle, but they are:

• the need to connect to the gas pipeline or purchase of the cylinder;
• in the case of the work of a belt from balloon gas, you will have to take care of fire safety not only the bath itself, but also the places of storage of cylinders. Where and how to store them, you will learn from the article

Important:

1. When buying a gas furnace necessarily check all documents for it (technical certificate). The device must comply with generally accepted gas equipment quality standards. If there are no documents, alas, you caught the unfinished seller. And no one responds for the reliability of the product.
2. Buy gas stoves famous manufacturers in corporate stores. Never in the "private traders".
3. Devices that have expired, or simply "running" can be sold on the use of used things. Taking fate with such a furnace is not worth it, even causing a small price.

Electric bathing stoves

Finally, the most popular view of bathing stoves today is electric ovens. They differ in form, sizes and power. Work, by itself, from electricity.

Pluses of electrical stoves:

• compactness;
• reliability and durability;
• fast warning of the wage in a short time;
• uniform heating;
• affordable cost;
• no need to build and clean the chimney, supply gas pipes and so on.
• high level of fire safety.

To minusesPerhaps you can attribute the type of fuel. If the area where your site is located, is famous for interruptions with electricity, then the kilns will have nothing to eat. Alternatively, you can adapt, but it is still not very convenient.

Combined models Work on two types of fuel. For example, there are gas-wood furnaces. They use firewood and liquefied gas. Their design involves the presence of firewood and gas-melting equipment.

2. Location of firebox

According to this sign, the furnace is divided into normal and with elongated firebox. The elongated allows you to pull the steam room from the adjacent room. This improves the level of fire safety and makes the microclimate of the bath more comfortable.

3. Para Source

This optional parameter divides the range of furnaces on, again, normal and with separate steam generator. Traditional bath pairs should be dry and easy. Not every furnace is able to develop a sufficient amount of such a couple. Then the steam generator is applied.

4. Features of the warming up

Bath furnaces can be cold and hot. The first walls will not be warm above + 45 ° C. The second can warm up to + 100 ° C. Heat is given precisely through the walls.

5. Form

There are 3 main types of bath stoves: rectangular, curly, cylindrical.

Rectangular - This is a classic option. They are stable, the form supports uniform heating of all parts of the furnace. What you can not say about cylindrical. They have the upper and lower parts can heat up unevenly. Such a furnace can be deformed over time.

Some couple lovers perceive visiting the Russian bath as an excellent vacation for the body, others as a method for the prevention of many diseases. And indeed, regular trips to the steam room strengthen health and immunity if there are no contraindications.

However, the real comfort of resting is provided only when the oven is correctly selected for the Russian bath - moderately powerful, efficient, safe. In this article, consider the best models of factory manufacture - relevant and conquered recognition of consumers. We will also focus on the criteria for choosing a suitable model.

Wood heating has a relatively low efficiency, but the baths, especially in the north, is still made to trample it. For this reason, we have made a rating of models working on wood fuel.

The presented devices differ in design, characteristics, sizes, functionality, manufacturing material, but all fireproof and are designed to heat the steam room

The tops are stoves of famous manufacturers, well-selling and having many positive feedback.

Place # 1 - Harvia M3

Finns - real pros in the production of high-quality equipment for baths and saunas, and model M3 is another confirmation. By occupying a small area on the floor, the Kamenka for the Russian bath has a vertically elongated body, so the room is evenly warming up.

The special open compartment loads 30 kg to be purchased separately. The design is thought out in such a way that the maximum heat exchange occurs, and the oven for a long time remains hot.

The furnace is distinguished by compactness, pleasant design. The case is painted in neutral colors - black and steel. The paint is heat-resistant, over time does not lose protective qualities and appearance. Through the heat-resistant glass are visible flames.

Technical specifications:

• heating capacity - 16.5 kW;
• designed for volume - 6-13 m³;
• furnace - without removal;
• water circuit - no;
• kamenka - open, 30 kg.

According to reviews, the oven is beautiful, economical and fast warming room. Although it is not intended to connect a water loop, it can be supplemented with a water capacity, which is purchased separately and mounted into the pipe. If you need a water circuit of heating, we recommend to familiarize yourself with the water circuit.

A negative point is a low efficiency, only 67%. The scheme of the harvesting of ash is not thought out - during operation and during cleaning, part of it turns out on the floor.

Place # 2 - TMF Geyser 2014

The Geyser Series of thermoform brand has a feature - a combined heater. An interesting constructive solution allows you to make the internal vaporization system more efficient, melt oven and heat the steam room to 100 ° C for about an hour. This applies to all 4 varieties of 2014 - Viter, Carbon, Inox, Carbon Union.

In the market of more than a dozen different modification versions, the body of which is made of chrome steel. Color spraying a convector can be different: terracotta, anthracite, beige, chocolate. The door is made either of the glass or stainless steel.

Technical specifications:

• installation method - used;
• designed for volume - 8-18 m³;
• water circuit - yes;
• kamenka - closed / open, 63 kg.

Consumers like that the stove can be made of lamps, briquettes, pellets. The central upper arrangement of the chimney greatly simplifies the installation. The ash can be taken in the process of burning thanks to the drawer retractable design. Open part of the heater can be used to blast the broom.

Claims concern mainly the service life. Users complain about the rapid burning of the heater. After 3 warranty years, it comes into disrepair.

Place # 3 - Harvia Legend 240 Duo

Mark Harvia is really loved by buyers and popular, despite the high product prices, so in the ranking - another, more powerful and productive model. It can warm enough bulk steam room - up to 24 m³, so if the bath is designed to relax a large family or company is a good option.

The maximum open heater is made in the form of a metal mesh in the form of a barrel, allows you to upload 200 kg of stones. Reliable design is recommended for commercial purposes.

Technical specifications:

• installation method - used;
• heating capacity - 21 kW;
• production Material - Steel / Glass Door;
• designed for volume - 10-24 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - open, 200 kg.

Buyers appreciated the beautiful design of the firebox of the fireplace type, thanks to which you can observe the burning of the lane, as well as an interesting and simple design of the chapel-basket. The double burning system increases the time of use by the steam with the minimum number of bookmarks.

The main negative factor preventing the purchase of furnace by all those wishing is the high cost - almost 40 thousand rubles.

Place # 4 - Gefest PB-04

Cast iron model designed for self-installation in brickwork. Thanks to the elongated flue channel, it can be reached in adjacent room with a furnace. The walls of the housing have a thickness of 10-60 mm, which indicates their reliability and minimal probability of exercise. The parts are solid, produced from the cast iron of the sch-20 with chrome, seams and butts are not.

Gas survival system, a plane sensor and a large heater of the heater allow to increase productivity and the combustion time of firewood.

Technical specifications:

• installation method - used;
• heating capacity - 8 kW;
• production material - cast iron / cast iron with glass door;
• designed for volume - 15 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - open, 180 kg.

The advantage recognized material manufacturing - cast iron. It is quickly heated and "gently", evenly distributes heat. The efficiency reaches 87%, which is a good indicator for wood stoves. Many people like the design of the furnace - traditionally "heavy" for cast iron products. The door is decorated with gilding and ornament.

The main disadvantage - the furnace is suitable only for a small wage. The weight assembly reaches 700 kg, which causes complexity during transportation and installation.

Place # 5 - Varvara Terma Kamenka

The domestic production device is characterized by a combined heating, allowing to increase the effectiveness of heating, for a long time to maintain steam-steerly heat. It is designed for the bulk room, thanks to the remote flue portal, two rooms can be heated. Heating to an acceptable temperature is performed in 1-1.5 hours.

The open part of the heater is made in the form of a basket framing the casing, inside of which the closed part is located. The whole design is made of steel coated with heat-resistant coating of black.

Technical specifications:

• installation method - outdoor;
• heating capacity - 14 kW;
• production Material - Steel / Glass or Steel Door;
• designed for volume - 12-24 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - closed / open, 240-250 kg.

The advantage of the furnace is the possibility of an additional configuration with a remote tank for water 60-120 l, which is installed on the pipe or in the ceiling, or in the attic room. Instead, it is possible to install an easier-in-installing tank at 50 liters.

Buyers do not suit the appearance of the furnace. Compared to modern modifications of competing brands, it looks too primitive. Some consumers use a plane with brick or stone to somehow improve the design.

Place # 6 - Vesuviy Skif Standard 12

An acceptable solution from the company Vesuvius for hot park lovers who want to quickly and cheap baths. The furnace housing is made of structural steel with a thickness of 6-8 mm and is designed for long-term operation - up to 10 years. Door, bump and grate with cast iron.

Kamenka is an open convection casing, if you say easier - a bulk grid designed to load 110 kg of stones.

Technical specifications:

• installation method - outdoor;
• heating capacity - 12 kW;
• production Material - Steel / Glass Door;
• designed for volume - 6-14 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - open, 110 kg.

Simple budget modification has become popular thanks to the cost. However, there are other advantages - good heated steam room, beautiful door design, convenient cooker cleaning system.

The disadvantage is the material of production. Already at the price you can guess that there is a risk of rapid exercise, especially with frequent use. Therefore, we recommend purchasing a furnace for cottages with seasonal visits.]

Place # 7 - Feringer Mini

Beautiful, lined with a natural stone oven from a series of lamella. Created in German technology, which is confirmed by a certificate. Responds to European safety and efficiency standards. Economic, suitable for frequent visits to the bath. The heat from one bookmark holds for 3-4 hours.

There is a possibility of blowing a heater to remove excess moisture from the steam room. Large, fireplace type, made of Robax glass. The manufacturer claims that the bath stove with a closed stone can be operated in various modes: a bath, hamam, sauna.

Technical specifications:

• installation method - used;
• heating capacity - 16 kW;
• production Material - Steel / Glass Door;
• designed for volume - 16 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - closed, by 60 kg.

The advantage is the presence of an additional option - aromatherapy. In a small container, it is possible to add oils with smell of needles, bergamot, mint and enjoy a pleasant aroma during a paired session. Stylish design and beautiful furnace make eyes.

Disadvantages are the same as most of steel aggregates - the risk of premature exercise during regular use.

Place # 8 - Ermak Elite 12-C

The economical model from structural steel with the addition of 17% chromium. The design is distinguished by a stylish design, rigidity and a thoughtful heat transfer system. The furnace is designed for a limited room, but there is the possibility of mounting on 2 rooms due to the elongated furnace.

Big plus is the ability to connect a water loop, a mounted or remote tank for water heating. The door with a diagonal of 310 mm panoramic, equipped with glass Robax.

Technical specifications:

• installation method - outdoor;
• heating capacity - 12 kW;
• production Material - Steel / Glass Door;
• designed for volume - 14 m³;
• furnace - with the possibility of removal;
• water circuit - there;
• kamenka - closed, by 40 kg.

The main advantage of the furnace is an extended functionality. You can heat the water for the shower or for heating adjacent rooms. In addition to water tanks, a steam generator is connected, an additional convector. You can also attach another heater - mounted, accommodating 40 kg of stones.

Minus - manufacturing material. A steel furnace with thin walls is easy to "overheet", after which it will become unsuitable.

Place # 9 - Sugar Teplodar 16 LK / LC

The furnace is interesting in that it has several heating modes. For half an hour, leaving water, you can arrange the most hot microclimate with a temperature of more than 100 ° C for particularly enduring steamboats. If you need a mode, as in the traditional Russian bath, the furnace is estimated in slowly up to 80-90 ° C.

The letter "L" in the name of the model denotes the material of the manufacture - high-alloy steel with chromium, "K" - equipping the furnace with a convector casing. The modification of the LC differs from the LCA in that the furnace is made from the pre-banner.

Technical specifications:

• installation method - outdoor;
• heating power - no data;
• manufacturing material - steel;
• designed for volume - 8-16m³;
• furnace - without removal;
• water circuit - no;
• kamenka - open, 60 kg.

Users are positively assessed by the versatility of all Sugar models - they can be pulled out both firewood and gas. To connect the gas, you must purchase a gas-melting device. Convenient and what can be equipped with a bake of water tank.

The negative side of steel aggregates produced by Herodar, as well as all budget models, relates to a limited life.

Interested in a furnace for a bath running on gas? We recommend to familiarize yourself with the market.

Place # 10 - Convectic 26

Inexpensive model designed for both steam preparations and water heating. It can heat one or two rooms, depending on the installation of the flopping department. Production material - steel + at least 13% chromium. The closed design of the heating increases the stability of heating, and the casing provides a "soft" heating and protects against burns.

The modification of the "plasma" instead of the steel door is equipped with a large heat-resistant glass screen, so that the facial part looks more modern and elegant.

Technical specifications:

• installation method - outdoor;
• heating power - no data;
• production Material - Steel / Glass Door;
• designed for volume - 26 m³;
• furnace - with the possibility of removal;
• water circuit - no;
• kamenka - open, 90 kg.

There is the possibility of heating water, which is very convenient for the bath. The cost is low, so the model is acquired with pleasure. The casing is covered with a stack of black paint, which will not pale and do not get caress over time.

Weak place - thin parts made of steel, which from constant exposure to high temperatures quickly go.

In the ranking, not all models worthy of attention are presented. Annually the range expands due to more reliable, universal units. If you want to find the best bath oven, learn carefully reviews and listen to our recommendations.

Criteria for selecting a wood-burning furnace

Usually the furnace is selected under the room of the steam, given the volume / power ratio. But the design is played a big role: one like the rounded structures in the style of high-tech with heat-resistant glass, other - coarse cast iron housings with relief doors.

But it is better not to be guided by some one aspect, but to consider all the technical specifications and structural features of the unit. We suggest to consider several criteria before choosing and purchase a furnace for baths on firewood.

Gallery of images

In order not to make complex calculations on the power calculation, it is enough to look into the instruction in which both indicators are indicated - and power, and volume

The body is most often made of steel or cast iron, less often - from combined materials. The door often happens from tempered glass, grate - from cast iron

The furnace with a conventional fuel canal is installed directly in the steam room, and the elongated firebox is necessary if it is located in the adjacent placed room and passes through the wall

Furnaces boilers are equipped with hot water tanks and strapping to connect a water circuit. They can be used as a boiler for heating adjacent rooms.

Thanks to the open design, the stones hot to + 250 ° C quickly warm up air. This type is optimally suitable for bathing with frequent visits.

With all the variety of metal bath furnaces manufactured by the industry, there is a clear separation of products to classes and groups. The applicability of models is due to the operating conditions and obtaining the desired result on temperature and humidity modes. To get a more visual picture of a possible choice, we reduced the main characteristics of the existing structures of iron furnaces for baths into one table. Having received an initial idea of \u200b\u200bthe peculiarities of certain groups, you can make a conscious selection of the furnace without spending additional funds and time to search.

The purpose of the article: Provide reliable information to potential buyers of bath furnaces and help in choosing the optimal model.

The main characteristics of bath stoves

	The heat drying of the furnace should be sufficient to warm up the steam and adjacent rooms for a short period of time. The optimal time is the heating of the steamer in the summer, 30-40 minutes, heating the steam and adjacent rooms in winter at a temperature of -10 ° C for 2 hours.
Sufficient capacity of the heat battery (stones)	The two most important parameters for bathing stoves are the mass of stones and their temperature in normal operation. To create a Russian bath mode in a steam room, you need to evaporate 100 grams of water to the cubic meter of the room. At the same time, steam should be "transparent" with a good degree of warm-up and the temperature of the stones should not fall more than 100 degrees. Otherwise you will get "heavy" and raw pairs. Calculations show that at least 5 kg of stones (minimum), and the optimum amount is in the range of 6-8 kg per cubic meter of the steam room. The temperature of the stones in normal operation of the bath furnace should be 200-250 degrees, which can be achieved if the design of the heater is closed or non-ventilated.
The presence of a steam generator to create the necessary modes	This item is directly related to the design of the heater and the previous parameter in the table. Water delivered by the steam cannon in the central part of the heater evaporates with the creation of an optimal steam, slightly reduces the temperature of the stones and ensures uniform steam supply throughout the room.
Firing material	For good furnaces, stainless steel with a chromium content of at least 12-13% is used, ideally at least 17%.

Advanced recommendations for choosing bath stoves

Basic Requirements for Banners	Description of the requirements for baths
Sufficient thermal power	It should be borne in mind that heating air in steam room and adjacent premises takes the minimum time compared to the heating of walls, ceilings and floors in the bath. Consultants in stores, as a rule, are proposed to use cubic meters in the room in the steam room, which does not give a complete picture of the sufficient furnace power. for example, Warming up the steam of 8 cubes in winter will require 4 kW for 1 hour. Since both the oven itself, the heating, water in the tank and the screen occurs at the same time, then increase the thermal power to the coefficient 3. We obtain a value of 12 kW. If the steam room is not uphawing and warming the log logs, then use another coefficient - 1.5. We already receive 18 kW. And when heating adjacent premises, we increase the resulting power at 2. A sufficient power of the furnace in our case will correspond to a value of 36 kW. If you do not rush anywhere and agree to wait not one hour, and two hours before the bath output to the mode, then it is enough to multiply the power to 1.5.
Firing material	Most inexpensive bath furnaces are made of structural steel, the strength of which falls quickly when heated. The combustion temperature of firewood is approximately 400 ° C, and this is the beginning of scale formation in structural steel. The walls of the working bath furnace warm up significantly more, respectively, "black" steel, even thicker frit much faster than stainless steel. If you take into account the furnaces of the average price range, then the chromium content in the used steel is 12-13%, which has a positive effect on the cost of the product and on operational characteristics.

Table of models under consideration

Category	Name	Price
Economy class	1.	9590 rubles
	2.	9999 rubles
	3.	10800 rubles
	4.	18900 rubles
	5.	23000 rubles
	6.	17900 rubles
Middle class	7.	25850 rubles
	8.	25,000 rubles
	9.	25600 rubles
	10.	25,000 rubles
	11.	25,000 rubles
	12.	28000 rubles
	13.	29900 rubles
	14.	29900 rubles
	15.	30000 rubles
	16.	36600 rubles
Premium class	17.	43500 rubles
	18.	52,000 rubles
	19.	69000 rubles
	20.	96000 rubles
	21.	89000 rubles

1. Heat Extra - 9,590 ₽

The heat-extra 400 oven has a compact size, it is placed even in small parilots. Made of structural steel 6 mm thick. Service life, subject to operation in the "country period" - 8 years. In winter, the power of this model is enough for heating the wage volume of 4 m³ for an hour, and 12 cubic rooms warm in 2-2.5 hours. In the oven you can lay 60 kg of stones, this is just enough to maintain the regime of the Russian bath in the steam room 10-12 m³ . Therefore, the furnace is suitable for operation and in summer, and in winter.

Firewood is used as fuel - 370 mm. The cylindrical form ensures efficient use of the volume of the furnace. Release with steel and cast iron door. Differences are more decorative: on a more expensive cast iron door there is an ornament.

Heat Extra 400 is not designed to use by avid family lovers. This is also talking about the guarantee of 1 year, whereas the 20-year warranty is distributed to most of the other models. If necessary, this model can be chosen by brick or install the heat convective screens. As an option, you can put a remote water tank with a volume of 20-100 liters or fasten it on the back wall or pipe.

2. TMF Osa - $ 999

The furnace is convenient for a small bath bath with a steam of up to 9 m³. The power of the furnace is 9 kW that when applying our calculations is not enough to rapidly heating the room. To achieve a good result and the outlet of the steam room, you need about 2 hours in the winter. Consider that the furnace is not suitable for the warming up of adjacent rooms. The manufacturer indicates the minimum size of the steam room 4 m³, which is closer to this power.

Of the technical characteristics, we see that the mass of the stones is 25 kg, therefore, with a minimum need, we can use the furnace in a steam room of 5 m³. But for the best result, the volume of the wage should be no more than 4 m³. It turns out that the manufacturer has somewhat slightly, indicating the operating range in 4-9 cubic meters of the room. Based on these data, we conclude - the TMF bath furnace iszed for operation in the summer, and in winter it will take quite a lot of time to access the mode.

Next, the maximum fuel load of 21 liters. If you take that 1 cubic meters of firewood is 300 kg, then the maximum load is 3 kilograms of lane. With a combustion of 1 kg of raw wood, approximately 1 kW / hour of heat. To achieve the parameter manufacturer specified by the manufacturer, it follows dry lamps that give about 2-2.5 kW / hour.

The standard length of firewood is 35-40 cm, for this furnace, "short-term" 30 cm are used, you will have to negotiate with sellers about the delivery of a personal size.

3. Ermak 12 - 10 800

The furnace is interesting because it can be bought in several versions. It as a designer is complemented by accessories that increase the comfort of use:

• grid for stones that reduce hard IR radiation;
• hinged tank, heats up from the back of the stove;
• heat exchanger for heating the remote tank.

For economy-class furnace, the manufacturer used a good stainless steel with a chromium content of 17%. The power of 12 kW is the optimal heating of the steam of 6 m³. And again we get the result close to the lower range of volume.

Mass of layered stones - 40 kg. Warming up such a mass of stones will require a longer furnace firebox, but when entering the mode, we get good inertia - stones will not allow the temperature in the pair to decline too quickly.

For the convenience of users, the length of the furnace is increased, which provides a more bulk bookmark of firewood and, therefore, long burning.

For additional convenience of using the Ban Furnace, Ermak 12, additional options are installed on the model: heat exchanger and remote tank. So you can avoid boiling water directly in the steam room and ensure the sufficient amount of hot water.

4. TMF Tunguska - 18 900

In the Bannal Furnace of TMF Tunguska, thermal equalization technology was applied. Those. The manufacturer has undergone the model due to the use of a thinner metal in the "non-response" structures and increased the wall thickness in places with high heat load.

Tunguska TUN oven is more massive, which implies heating not only steam room, but also related rooms. By applying our calculations, we find out that the manufacturer indicates the maximum amount of parch room in 24 cubic meters, implies the heating of the bath with the inside during the summer. If you use a bath and winter, you will have to install an additional heater in the recreation room and the output to the mode will be about two hours.

The action of the furnace is to ensure air convection - this directly indicates that it will not be possible to achieve the regime of the Russian bath, only saunas, with its dry air and rigid temperatures.

5. Teplodar - Rus - 23 000 ₽

Furnace for sauna Herodar Rus 18 LPSP pro with a serious margin of strength - steel up to 4 mm in thermally loaded places and chromium content up to 17%. If you want to get quality and reliability at low cost, then there is practically no other alternative. There are several flaws of the manufacturer, but you can not talk about their absolute criticality. First, the main heating of the stones comes from the smoke collector (laid out around), so you have to try to arrange them correctly with minimal gaps. Secondly, the collector's gap is very narrow, which prevents the emission of soot and accumulates it. As a result, the thrust deteriorates and clean the manifold is required 2-3 times in the season depending on the intensity of operation.

When trash and further output, the mode is required to lay firewood on 2/3 of the volume of the furnace. A good thrust provides almost complete combustion of fuel, which is visually noticeable for transparent outgoing smoke.

The stated loading of stones 90 kg is not true - the maximum will be able to lay 60-65 kg of the middle fraction. The manufacturer, apparently, when checking, used stones with a very large density or crushed stone.

Water on the heater should be pouring very carefully and pick up the optimal amount experimentally. Insufficient heating of stones around the edge will give heavy steam.

Overview Herodar furnaces with a detailed description of the characteristics.

6. Barbara Mini - 17 900

Most garden baths have small sizes and focused on fast preparation to wash after a working day. Accordingly, the steam rooms are very small and require compact placing furnaces. Developed taking into account such needs and with small dimensions has sufficient power of 8 kW. The volume of the steam room is 12 m³, stated in the characteristics of the model, is clearly overestimated. According to the calculations, the steam should be about 8 cubes - it is approximately 2 meters with a ceiling height of 1.8-2 meters. If the bath works only in the summer, then 12 cubes will be driven to the sauna regime for about an hour.

The manufacturer declares a double convection that quickly warms the air, but "forgets" that the heating of the room is not only the volume, but also walls, ceiling and floor. Therefore, this furnace is suitable only for the country's dacha option, which is started in the summer and in the offseason.

Couple in an open stone is harsh. To heat open stones to the desired temperature, it will be necessary to drive the furnace, and with strong infrared radiation and small size, not every banel will endure a good portion of steam.

7. Dobrostnel August - 25 850

Bannost Bannost - August Stone Strong with Panoramic Glass

Currently, there is a tendency to modify furnaces of almost one direction in the market. What does the buyer require? Inner heating, heat battery, fast heating and long service life. It is for this way that producers of the company Dobrost.

The oven Empress August Stone Strong is calculated by a 10-22 m³ steam room. Not bad run? Practically from a small snack to quite a decent room. Why is that? We start to understand. First, 22 Cuba Steam Parcs are with the initial parameters of the temperature in the room 20 ° C and in the summer. Secondly, it is indicated that there must be the right insulation of the room. Those. A naked log house will not allow such indicators for the specified period of time. But, we will give proper manufacturers and see what the oven is capable of reality.

So, although the manufacturer does not indicate power, we will take it within 14-16 kW, which indicates the volume of firebox and the declared efficiency. With such a power and efficiency, warming up the steam in winter without plating on the walls will be about 3 hours. During this time, we will get high-quality heating of the inner playground, outdoor stones and the ability to "play" with modes. Do not hurry and warm the room in accelerated modes. There is a risk of getting a situation when the ears crack, and the legs are more. After entering the mode, the bath furnace will give a good result even for the "sophisticated bunchings" approached by the rank.

The model uses structural steel with a thickness of up to 8 mm in places of high thermal load. The stated service life of 20 years is accepted with a number of reservations: do not overheat, do not water water, moderate operation. But even 10 years old - it is already very good and the money spent will be fully accumulated by the pleasure.

Here we again come across "snakes". Firewood is only 30 mm long, but the manufacturer guarantees a good heat from each full. Even promoted the slogan "Enough to drown with spats."

The bath oven is very good by execution, the main requests of consumers are implemented, and critical comments are always taken into account and corrected in the following modifications.

The advantages of the furnaces from the manufacturer Dobrostal:

8. Feringer Classic - 25 000

One of the best Russian manufacturers is a model that is already quite close to the concept of "bath oven". Inner heater, steam gun and the ability to use various bath modes, from Russian easily steam to exhausting saunas heat. The furnace is very demanding of dry wood, as they are designed to "top burning" - the firewood burns from top to bottom, and there is no grate in the oven (which hesitates the construction).

Here the manufacturer did not deceive us and with a capacity of 25 kW, the oven will easily heat the 12 cubic steam room and a rest room for 12 squares. But only in the summer. In winter, the oven is enough only for heating the above-mentioned steam room, and a heater will have to be placed in the recreation room.

How to turn the Feringer's oven:

9. Vesuviy Scyth - 25 600

The manufacturer of Vesuvius is ready to meet consumers and offers buyers a furnace of an improved design. The model has a built-in heater, where the stones are heated to a temperature of about 400 ° C, which is sufficient to obtain a fine "light" pair. To "plunge" part of the convection, the developers provided a bath oven with a grid, which keeps the stones around the model body. A peculiar battery of heat covers visitors to pairs from hard infrared radiation, but with a decrease in convection flows you can argue. Moreover, the manufacturer itself focuses on a fast warming steam (1-1.5 hours) due to the "right" air circulation.

To leave the price of a model in a comfortable range, structural steel was applied. Yes, of course, the manufacturer has taken into account that the "black" steel forms a scale, and accordingly begins to roast already at 400 ° C (we look at the heating of the heating of the heating), therefore increased the wall thickness to 12 mm at the bottom of the heater. The fact is that the bottom of the chain is exposed not only to high temperatures, but also the pressure of the stones. Melting and thinning steel. However, 12 mm thickness with the correct operation of the model is enough for 10-12 years. But under one condition. Intensive metal destruction begins to occur at 550 ° C. Do not heat the furnace "to Krasnaya", no matter how you would like to quickly warm the steam room. In addition, when overheated, the destruction of welded elements occurs. Here, the structure of the metal no longer corresponds to a solid leaf, and only accelerates the process of discrepancies of the seams only.

In general, the oven creates a pleasant impression as the price and the design. The main mode of operation is a sauna. To get the parameters of the Russian bath requires gentle preparation (about 3 hours) to distribute heat and warm the walls of the bath.

Description of the advantages of the furnace and reviews about the operation of the model:

10. VIRA KOMFORT 18 - 25 000 ₽

The VIRA Komfort 18 oven is as close as possible to the standards of the Russian bath, although it does not reach this title on a number of parameters. First, convection. Fast heat steaming occurs due to convective flows, which in the Russian bath is unacceptable, but for the sauna mode it is quite suitable. Secondly, the oven has an outer casing that prevents infrared radiation, but it is far from real brick screens that act as heat accumulators. In general, the bath oven Vira Komfort 18 is a good product with a pleasant design and a wide transparent overview door.

The main advantage of the furnace in a simple, but efficient design. If you have enough sauna mode, the furnace goes to the required temperatures quickly. It is not recommended to make a brick screen, possibly "joining" convection flows, strong heating of the product and as a result, the material is projected.

Bath Overview by user:

11. TMF Gaiter 2014 - 25 000 ₽

The furnace is located in the same price range as the previous models, but is a more advanced design option for creating regimens of the Russian bath. The closed heater allows you to get a wonderful steam at air temperature in a pair of about 65-75 ° C. But again we "we are on the old rake" - convection flows. The furnace casing by definition cannot be a good screen, but is supplied by the manufacturer, almost as an innovative solution for the redistribution of convection flows. Yes, the furnace, you can "dispel" to the sauna modes per hour. But with the Russian Standard will have to tinker and "fill the hand."

Look at the scatter of the battle room. The manufacturer does not in vain specifying such various parameters, and correctly calculate the load on the bath furnace remains the case of the hands of the buyer himself. So, 8 m³ of the steam rooms are in winter operation, a "naked" to the fire and the need for heating adjacent rooms. 18 Cubes - Summer Operation, Heated Parling Combined Waste Room.

By the way, the appreciation of the furnace due to the inner heaters is "compensated for" by a thinner hardware and a chromium content in steel 13%. With the "acceleration" of the furnace 2-3 times a week, the walls of the wall will occur in 4-5 years.

Features and characteristics of a bath furnace:

12. Volcano - Elbrus - 28 000 ₽

Furnace manufacturers volcano. Elbrus 26 focus on protecting users from hard infrared radiation. What can be achieved with the help of an ordinary brick screen, here is implemented in the form of a "triple protection" with a casing of steel. And if the brick screen is allowed to cut off convection streams, closing specially installed doors, then in this model, air flows are constant, which does not differ in the microclimate of the steam room. The manufacturer tries to enter the user in error, saying that the "double cover makes steam in steam soft." This is the root of the wrong statement. A good couple is formed by the receipt of water on overheated stones (400-500 ° C), and problems may arise in the furnace. The stones are stacked in the "bath", the heating of the lower layer can still be considered sufficient, but the upper layer is not heated enough (about 200 ° C). Since the water is served on the top layer, the pair will be too raw and heavy. Only "breaking" the furnace to high temperatures "sauna mode" can be obtained by something similar to normal steam for the Russian bath, but the high temperature in the steam room will not allow them to fully.

A good solution for this model of a bath furnace began to supply the design with a heat exchanger for a remote tank. Thus, several problems are solved at once: no water boiling directly steam room, you can increase the volume of accumulating hot water. In general, the oven deserves ratings satisfactorily and suitable for a sauna with a short-term regime of the Russian bath.

13. Harvia Legend - 29 900

The first thing that immediately causes the location to the manufacturer is an honest application for furnace accessories to the saunas. A fairly successful model with a large number of stones that provide good inertia after the end of operation of the furnace is protected from rigid heat radiation and significantly devour convection flows. In addition, stones protect the surrounding space from strong heating and serve as a kind of screen, allowing to reduce the distance to combustible materials. That is why the furnace can be placed more compact without cluttering the useful space.

The grate grille controls the air distribution in the furnace, and the oxygen part falls on the upper burning of firewood. Accordingly, the tab burns evenly, due to the effective combustion increases the KPD of the furnace.

Unfortunately, the main advantage of the furnace is a large volume of stones, is the weakest place. First, the temperature of the upper (outer) stones is insufficient to create a good steam. It is possible to serve only a bit of water, so as not to cool the surface or content with a small amount of flavors.

How to install Harvia Legend oven:

14. Karelia-5 - 29 900

Casting furnace Karelia-5 "Onega" middle class with a large margin of strength, but somewhat inconvenient to use. In classical performance, it is rushed only from the steam room, and this is inconvenience for users and an additional source of infrared radiation. It does not have a tank for heating water or heat exchanger, so hot water supply is required, and this is at least the constant heating of the premises.

Due to the high heat transfer, the cast iron occurs a quick heating of the steam room, but the stones in the heater reach the desired temperature only in the lower layer, and this should be tried to deliver water there. The furnace is recommended for saunas and, accordingly, there is no speech about the Russian bath.

There is no control of convection flows, warming up and bathe only in one mode without the possibility of change. The oven is durable, but it seems to us, after a while you will want to change it to a more perfect model.

15. TMF Kalina - 30 000 ₽

It seems that it focuses on the rapid warming of the room, although advanced baths are taking advantage of even heat without the "ears wrap up" modes. In this model, there are almost all for non-earnest users. Panoramic glass for relaxation, chimney labyrinth to increase the efficiency of the furnace, the internal loading of 95 kg stones that ensure the preservation of heat. Additionally, you get a built-in heat exchanger for water heating in a remote tank. And this makes sense - boiling water in the waterroom in the so-called samovar on the pipe spoils all the impression of the bath and causes a burning (in all respects) the desire to quickly finish bath procedures.

It is not entirely clear the proud statement of manufacturers about warming up with a paired volume of 30 cubes. Apparently make a bias on the size of the furnace and stones, which will give the desired effect, but only after a three-hour firebox. If you take the minimum value of 18 cubes, then there is also a hope of entering the regime of the Russian bath, but at maximum numbers you will turn off the bath only to the sauna with a quick coolement of the room. In general, the oven is good, but again "gets out" the savings - structural steel applies.

16. Troika - № 06m2 - 36 600

Troika oven for classic Russian bath. Of course, you will have to carry out the required refinement of the steam room, as the furnace is designed to operate in a brick plan. But in this case we get:

• soft heat that radiates from a heated brick;
• high inertia, steam room, and the bath will be warm for a couple more days, and this drying and lack of log rot;
• uniform microclimate, there is no air movement from convection streams;
• burnages are excluded about the hot metal.

Furnace furnace furnace is convenient and functional. First, aesthetics, and secondly, an additional opportunity to warm up the entire volume of the bath, and not just a steam room. The brick will require a longer exit to the mode, but placing convection doors on the screen from the brick screen, you can heat the steam room and the rest room very quickly for the "defrosting" of the bath volume, and also prepare a Russian steam room. To adjust the combustion, the bath furnace is equipped with a valve.

Very good oven for the Russian bath and to create a gentry gear mode.

17. GEFEST PB-03 M - 43 500 ₽

The cast-iron oven for the Russian bath, designed to clap brick. The advantages of the model are very much, but the main components are in the high inertia of the product, in the design of the inner chain of cast iron with a thickness of 60 mm and a special design of the furnace system.

The design of the stove walls allows you to quickly transmit heat into the heated room. The efficiency of the model is very high and burning firewood does not occur in idle mode. Additionally, it is planned that the heating temperature of the furnace is 750 ° C, but turbulent ribs give a decrease in temperature (ie, heat transfer) to 300 degrees in chimney. In fact, we do not flash the street, but we produce heat in the bath itself.

The forecast for the durability of the furnace is 30 years of operation, although this period is calculated and is not confirmed experimentally, but 15-20 years are quite enough to "work out" invested money.

Although the manufacturer asserts that even without the combustion process, the Kamenka is capable of maintaining the required temperature to obtain a good steam, it is not quite so. The weight of the Kamenka itself is about 50 kg and the maximum time for which there will be enough inertia, it will be about 40-50 minutes or the supply of about 3 liters of water. It is not recommended to stir oven for more than 5 hours a day.

Yalta 15 furnace is designed for a sauna, but, nevertheless, it makes everything possible to change the custom guar modes. First, two chambers, outdoor with a serious load of 200 kg and internal for vaporization with a 35 kg bookmark. Thermal power of 25 kW corresponds to the recommended pair of 10-20 m³. To overclock the furnace, you will need up to 12 kg of firewood per hour. For this you will receive uniform heating of the room for 110 minutes in winter and 80 minutes in summer.

It is worth noting that the furnace package includes a grain grille from heat-resistant cast iron, and the walls of the furnace 4-6 mm stainless steel. Where there is no direct contact with fire, structural steel is used - protective casing.

19. Isisim Sochi m2 - 69 000 ₽

Sochi M2 will become a real revelation for lovers of the Russian bath. The design provides for the creation of a brick screen (the manufacturer provides a scheme) or the purchase of a screen from Talco Chloride and a serpentine. The inner heater of 95 kg of stones and the built-in steam generator give out really light fine couples.

Notice, neither the drops of the debris - 40 kW of power warm the steam room 12-22 of the cube and still remains for adjacent rooms. The screen of bricks or more noble stones creates an amazing atmosphere of the Russian bath, and the accumulated heat is enough for drying the bath after operation.

In addition, the company offers to use attachments. The furnace provides for the fastening of the heat exchanger, which will provide high-quality water heating in the removal tank.

Bath furnace Wesamer. Slavs Russian high-end pairs, intended for paired medium size 15-18 m³. Despite the low power of the furnace - about 7 kW, you acquire an exclusive model fully ready for use. The furnace of the oven talcchloride does not require refinement, and, therefore, the operation of the model is possible immediately after installation. Convection flow control allows you to adjust the temperature in the steam room and go to the sauna mode. Blind of air movement, you already enjoy a real Russian bath.

The inner heater and water supply to the hot stones will provide easy steam with optimal moisture in the steam room.

The disadvantages of the furnace include the impossibility of the simultaneous warm-up of steam room and washed. If the brick screen can be positioned with its access to other rooms, here all the heat transfer of cladding occurs only in the steam room.

21. Isisim Gelendzhik - 89 000 ₽

So, the drum fraction, the bath oven from the company is Isisim - Gelendzhik. Do not even try to look for a flaw in it. 50 kW of power at reasonable sizes, 15 kg of firewood per hour, inner heater in 90 kg of bookmarks and of course steam generator. Additionally, spending 15,000 rubles, you will get a lining of the firebox chamotted bricks, which will further extend the service life of the furnace.

The furnace provides a constant temperature in the steam room and the steam supply in the Russian bath mode. A rather immodest price for the model is compensated for the service life of the furnace. The only thing that may cause the user is difficulty - this is a search for a good cook that can implement the clamp of the product with bricks, and these are additional costs.

Scheme of work furnace:

Editor's Choice

If your bath works mostly in the summer and you need a quick premises warming up, then purchase economy-class furnaces. They, as it is impossible, the best correspond to most user requests. In this category, we recommend furnaces from the company Teplodar