Transfer of gas equipment in an apartment building. Moving a gas pipe in an apartment: what you need to know Procedure for transferring gas pipes

You do not need to worry about turning off the gas at the riser, we will take care of this ourselves!

The price includes departure and necessary materials(pipes, fasteners, gaskets, seals, etc.). No surcharges and surcharges on the spot!

When ordering this service, a new gas valve as a gift!

An example of work in the kitchen to transfer a gas pipe branch under the countertop:

Before transfer gas pipe the crane was at a height of 1.5 m from the floor. When planning the kitchen, the gas outlet with a tap was in the wrong place.

After transferring the gas pipe, the faucet is located at a height of 78 cm from the floor, which fits into the norms of SNiP and is placed under the countertop.

Tip: If you decide to move the gas pipe in the kitchen under the countertop, when developing a kitchen project, immediately think about where to place the gas valve!
gas cock should not be located in the washing area, in a drawer in which household appliances are located.
It is necessary to choose a free box with a width of at least 30-40 cm, in which case there will be no problems with the location of the gas valve.

Transferring the gas pipe under the countertop with two taps (for the oven):

Initially, the branch with a crane was located at the level kitchen apron and got a little on top hanging box which caused the disorder. We chose a place under the countertop according to the kitchen plan - a free box with a hinged door, in which, as a result, two outlets were placed: for hob and oven.

Before the work, there was one crane, which was located above the countertop.

Two gas taps under the worktop (for the hob and oven).

Norms and rules for the location of gas pipes in the apartment

For execution quality installation or transfer of gas pipes must comply with the rules.

Violations that people are not even aware of, maybe a large number of(More than 100) !

To answer possible questions, we suggest that you familiarize yourself with some of them:

Connection denied gas appliance with multiple hoses, the hose must be solid;
Gas pipes and equipment are prohibited from being located in residential premises;
It is impossible to wall up gas pipes, laying in niches is not allowed. Gas pipes throughout must be accessible for inspection and maintenance;
Each gas appliance requires a separate gas cock. Up to the tap, the gas pipeline must be without threaded connections;
The minimum height of the horizontal sections of the gas pipe is 50 cm from the floor;
The pipeline must not cross electrical cable. The distance between them must be at least 10 cm at the intersection. (40 cm with parallel laying);
In a room with gas equipment, there must be a door;
The gas valve must be in close proximity to the device, always in the same room;
Flexible eyeliner(hoses) are used only for connection from the faucet to the appliance. The hose must not cross the gas pipe;
Geyser can not be installed in the toilet;
The pipeline must not cross ventilation duct;
The gas valve must not be directly above the stove (hot zone).

Natural gas is available in almost every home. With its help, stoves used for cooking work, heating can be carried out. Sometimes during repairs there is a need to modernize the gas pipeline system. In this regard, there are many prohibitions and restrictions that you need to know in order to avoid an emergency.

The transfer of a pipe through which gas passes is a very responsible matter, which should involve specialists. Only professional approach to this case will ensure security, which is very important.

The transfer of gas pipelines is most often carried out during overhaul in a private house or even in an apartment. Sometimes such manipulations are carried out solely from an aesthetic point of view when redeveloping the premises, which is not advisable.

Sometimes pipeline replacement is necessary for safety reasons. If any malfunctions in the gas supply system are detected, such defects must be promptly eliminated. According to modern norms and rules, it must be overhauled every 20 years of operation.

Basic requirements for the installation of a gas pipeline

Usually, the distribution of gas pipes in an apartment is carried out in the kitchen. If during its operation there was a need to transfer some elements of the system, during these works it is necessary to adhere to certain rules. In this case, security will be ensured.

Sanitary standards for the installation of a gas supply system at home

Efficient operation of gas pipes after all repair work possible subject to the following rules established by SNiP No. 2.04.12-86:

when placing pipelines, it is necessary to provide free access to them for monitoring work, repairs;
pipes through which gas is supplied should not come into contact with other structures and appliances in the room;
the gas pipeline should not pass through ventilation, door or window openings;
if both the gas pipe and the means of communication pass through the same wall, sufficient distance must be ensured between them;
the gas pipeline must run along the wall for minimum distance from the floor at 2.2 m (from the bottom edge, taking into account the insulation);
when distributing gas pipes, brackets, clamps, hooks, suspensions, etc. should be used to fix them to the wall;
to fix the gas pipeline on columns and floors, the same fasteners are used.

What is forbidden to do?

When carrying out a major overhaul of the gas supply system, it is necessary to take into account numerous rules that imply many prohibitions:

it is strictly forbidden to carry the gas riser. It is only allowed to change the location or length of the branch from it;
when installing a gas supply system inside buildings, it is forbidden to use plastic elements;
pipelines in residential premises must be made of steel, which is indicated in the relevant SNiP;
during repairs, it is strictly forbidden to block common taps or valves, which can lead to an emergency;
connection gas equipment and its start-up must be carried out by a specialist who has the appropriate permission.

How to apply for a renovation permit?

Before cutting the gas pipe or carrying out any other manipulations with this system, it is necessary to obtain a special permit from the relevant state authorities. This requires:

Contact the gas supply service at the place of registration of the house or apartment.
The homeowner must write an appropriate application. It indicates what needs to be changed.
apartment or private house where work is planned should be visited by a specialist gas service.
The master assesses the place where it is planned to carry out the specified repair work, and gives a conclusion.
After agreeing with the regulatory authorities, you can contact the company to draw up an estimate for the work being done.
After drawing up an estimate, it is coordinated with the owner of the housing, who must give his consent to the repair.
If all documents are in order, it is necessary to pay for the service of the repair team.

In any case, it must be remembered that if it is not possible to change the existing pipe configuration, there is alternative way problem solving. To mask unaesthetic elements gas system You can order special boxes. They will hide ugly details from the eyes, and successful external design allows them to successfully fit into any room.

Instructions for transferring pipes in the kitchen and general rules for the work

If you decide to remove the gas pipe or move it from one place to another, you must follow certain instructions.

Preparatory stage of work

Before carrying out repairs, take care of the following:

you need to contact the masters and find out from them what Consumables needed for repairs
the kitchen area where repairs will be carried out must be freed from furniture and any other interior items;
furniture remaining in the room and other valuable items that cannot be taken out must be covered with tarpaulin or burlap;
The gas supply to the appliances is stopped by a valve.

To carry out the transfer of the pipe to the right place, you must follow the following instructions:

After shutting off the gas on the riser, the pipeline is blown to remove debris and dust.
Extra elements are trimmed according to the existing plan.
The resulting hole is closed with a special plug.
A hole is made in another section of the pipeline, which will later be used to attach a new element.
The new pipeline is welded to the hole formed.
Installation of other elements of the gas system is carried out, if it is provided for by the design documentation.
A valve is installed to shut off the pipeline.
To seal the place of the formed joint, tow is used.
A tile or other gas consumer is connected.
The quality of the work performed, the reliability of the connections created and the absence of leaks are checked.
Most gas system repair companies provide a certificate of completion.

Rules for the installation work

In order to effectively operate gas pipes, it is necessary to adhere to the following rules during the next repair:

before starting repair work, it is imperative to shut off the gas throughout the riser. Any manipulation under pressure is prohibited;
the distribution of gas pipelines should be carried out in most cases by welding;
collapsible connections are allowed only in the areas of installation of shut-off valves, meters or gas consumers;
to any collapsible connections there must be unhindered access for repairs or inspection;
pipeline must be installed open areas walls;
if there are several gas consumers in the house, stop valves put in front of each of them;
in places where people are actively moving, the pipeline should be at a height of 2.2 m from the floor or more;
during installation flexible pipes their length should not exceed 3 m;
pipe joints must be rigid and reliable, since this is the most vulnerable point of the entire system;
when pipelines cross walls, they must be placed in specially equipped cases;
Steel pipes carrying gas must be painted to protect against corrosion.

If you follow these rules and involve only specialists in the work, the transfer of pipelines will occur without problems, and the created system will function without failures.

Video: Transferring a gas pipe in the kitchen

Blue flame can bring comfort and coziness to every home. Not a single hostess preparing food can do without it. However, the use of gas is often associated with risk, and the safety of all its inhabitants depends on how well the gas system is installed in the house. That is why the transfer of gas pipes and all the rest installation work gas supply systems are best left to professionals.

Moving gas pipes in a house is a very responsible matter, which is directly related to safety. Therefore, it is important to remember that certain skills and special training cannot be dispensed with here. Of course, the work of hired specialists in a house or apartment can lead to some financial costs, but if we consider the work from the security side, then its payment will not be so big.

As a rule, the transfer of gas pipes is carried out during a major overhaul in an apartment or house. But the need to move the pipes may also arise in cases of technical malfunctions. According to the rules and regulations, the entire gas supply system must be reconstructed every 20 years of operation. And in each individual case, whether this is an installation, whether it is necessary to move, cut a pipe or carry out other work related to the gas supply system, it is necessary to clearly follow all safety rules.

Instructions for transferring the gas pipe

A professional who carries out the transfer of gas pipes always adheres to certain rules and algorithms:

The apartment always has a special gas access valve, which should be shut off before starting work;
The gas pipeline must be carefully purged to remove the remaining gases from it;
At the junction with the gas pipeline, it is necessary to cut the pipe that interferes, and weld the resulting hole by welding;
A special hole is made in the wall and a gas pipe is mounted.

It is important to remember that the gas distribution must contain specially designed holes for a flexible bellows hose through which household appliances are connected. The length of such a hose should not exceed two meters.

Basic requirements for specialists when transferring pipes of a gas system

In the apartment, the gas pipe is mainly located in the kitchen. Every person daily uses the gas pipeline and household appliances connected to it. But sometimes it happens that the gas supply pipe interferes. In such cases, the transfer of gas pipes is carried out.

Before cutting the pipe in the kitchen, you must:

Write an application to the gas service and indicate the need to transfer the pipe;
A technical specialist will have to leave for the place where it is planned to move the pipe carrying the gas;
After that, the conditions for the upcoming work are assessed;
The specialist must make his decision about the possibility of transferring or cutting the pipe and, if necessary, make necessary calculations, as well as draw up a rough estimate.

Sometimes, when the layout of the gas supply system in the kitchen does not suit the owner of the house or apartment, you need to resort to drawing up a new technical plan for the room, taking into account how the new wiring should look like, whether it will be attached to the wall where the box for the gas pipe will be located, and so Further.

When entrusting the transfer of a gas pipe in the kitchen or any other room to specialists, you should make sure of their qualifications. To do this, it is worth checking the availability of certificates, dates of recertification and confirmation of professionalism.

After the layout of the gas supply system in the kitchen is changed, the gas service employees are required to provide an act of work performed and make an appropriate note about the system changes in gas passport premises.

Sanitary norms and rules for the location of the gas supply system

Regardless of whether the gas pipeline is fixed on the wall, in the floor or openly in the room, in any case, the distance from it to building structures, technological equipment or other pipelines in an apartment or house should be taken into account, taking into account the possibility of inspection, control and installation . At the same time, the gas pipeline system in the kitchen or in any other place should not cross ventilation grates, as well as openings for doors or windows.

Between the gas pipe passing through the wall and the means of wire broadcasting and communication, the distance must be determined in accordance with all existing rules safety technology.

V residential buildings the height of the gas pipeline and its wiring must be at least 2.2 meters from the floor level to the bottom of the pipe through which the gas flows. If the pipe is equipped with a heater, then in such cases the distance to the bottom of the heater is taken.

You can fix the gas pipeline, which is laid openly, to the wall using:

brackets;
hooks;
clamps;
pendants and so on.

The same means are used in cases where it is necessary to fix the pipe on ceilings or columns.

All requirements that regulate the distance between the fasteners of the gas pipeline are set out in the Sanitary Norms and Rules of SNiP No. 2.04.12-86.

Safety First

Basically, the layout of the gas pipeline system in an apartment, kitchen, house or other room is provided for in the planning documents of this room. Often, gas pipes are mounted on the wall. But if, nevertheless, you decide to make some changes, move or cut the gas pipe, then in any case it is worth remembering the safety rules. And this is understandable - during work, when the wiring of the gas supply system in the room is affected, there is always a risk of an accident. Therefore, if you decide to move the pipe or change its position on the wall only to improve the attractiveness of the room, it is better to refuse such an idea.

If the decision to make changes in the gas supply system is finally made, then make sure that at this moment there are as few people as possible in the room.

It is important to remember that when organizing the transfer of gas pipes and entrusting the implementation of work to special organizations, the organization must have the appropriate certificate to carry out work of such a plan.

All work related to cutting, transferring or fastening pipes must be accompanied by acts of work performed. And only in such cases you can be sure that nothing threatens your life and the lives of your loved ones.

Qualified specialists will quickly and efficiently transfer the gas pipe to the right place!

You do not need to worry about turning off the gas at the riser, we will take care of this ourselves!

The price includes departure and the necessary materials (pipes, fasteners, gaskets, seals, etc.). No surcharges and surcharges on the spot!

When ordering this service, a new gas valve as a gift!

If you are doing repairs in the apartment, and the gas pipe interferes with you, our specialists will help you put it in place!

Everyone who makes repairs in an apartment that has gas pipes, sooner or later, before or after choosing a kitchen, is faced with such a problem when a gas pipe is located in the middle and will simply ruin the whole appearance kitchen, corridor or will not allow you to install appliances at all ...

The cost of work can be clarified by phone, from photographs, on the spot. To get the exact cost, you need to more accurately state the problem.

You can send photos through the feedback form, sms, WhatsApp, Viber - 89857277305 or on email: [email protected] site

Move the gas pipe - Procedure

We need to understand the task, for this it is necessary to understand how the gas pipeline is going now, and what you want to get as a result;

If it is difficult to explain in a telephone conversation - send overview photos of the situation to us;

If it is not possible to send a photo, our specialist will come to the object for viewing;

If the scope of work is agreed, we will be able to choose the time and accept the application.

When contacting our company, you will receive:

Free consultation, assistance in choosing the location of the pipe and tap;

Transparent prices, no surcharges, surcharges on the spot;

Understanding of current requirements and rules for violations;

The shortest terms, from the moment of a call before execution up to 48 hours;

Our specialists will carry out the work on the high level quality and safety!

Tip: it is better to transfer pipes in the apartment until the repair is completed, while there is no finishing!

Often the thought does not immediately come to mind, how best to arrange the gas pipes, because in this issue no experience.

For many years of experience, we have prepared for you some wise advice:

Each gas appliance requires a separate gas cock. Separate welding branches are required for an independent oven and hob.
Remove the faucet under the countertop.
Don’t like the look of the kitchen when a pipe with a tap and a hose runs through the apron? You can move the branch with a crane under the countertop, to the height allowed by the rules. Please note that the gas pipeline should not be located in the washing area, as well as in boxes occupied by appliances! It is necessary to provide access to the gas pipeline for use, inspection and maintenance. We recommend placing the tap in a free box at least 40 cm wide.
Do not block gas pipes! We are approached by clients who once did this a long time ago, and now they are asking to bring the pipes outside in order to sleep peacefully.

Norms and rules for the location of gas pipes in the apartment

To perform high-quality installation or transfer of gas pipes, you must follow the rules.

There can be a large number of violations that people are not even aware of (More than 100)!

To answer possible questions, we suggest that you familiarize yourself with some of them:

It is forbidden to connect a gas appliance with several hoses, the hose must be solid;
Gas pipes and equipment are prohibited from being located in residential premises;
It is impossible to wall up gas pipes, laying in niches is not allowed. Gas pipes throughout must be accessible for inspection and maintenance;
Each gas appliance requires a separate gas cock. Before the tap, the gas pipeline must be without threaded connections;
The minimum height of the horizontal sections of the gas pipe is 50 cm from the floor;
The gas pipeline must not cross the electrical cable. The distance between them must be at least 10 cm at the intersection. (40 cm with parallel laying);
In a room with gas equipment, there must be a door;
The gas valve must be in close proximity to the device, always in the same room;
Flexible connections (hoses) are used only for connection from the faucet to the appliance. The hose must not cross the gas pipe;
The geyser cannot be installed in the toilet;
The gas pipeline must not cross the ventilation duct;
The gas valve must not be directly above the stove (hot zone).

Examples of work on the transfer of a gas pipe in an apartment

On the this example the gas riser simply did not allow to arrange kitchen furniture. The forces of our organization was moved to a corner.

To move a gas pipe in an apartment / house, you need to invite specialists - this process requires specific knowledge. But if a person is familiar with the construction business, represents the principle of gas flow into a residential building and knows how to work with his hands, then the transfer of a gas pipe can be done on his own. True, for this you will need to familiarize yourself with the rules for performing the work in question.

How to move a gas pipe, following the rules?

The reasons why the transfer of a gas pipe is required can be very different - rearranging the stove and furniture in the kitchen, technical issues gas pipeline, inconvenient location of pipes and so on. Regardless of what specifically prompted the process in question, you need to read the instructions for its implementation and strictly adhere to the recommendations of specialists.

Step-by-step instructions for transferring a gas pipe:

Turn off the tap that supplies gas to the apartment / house.
Blow out the pipe to remove any remaining gas from it.
The part of the pipe that is not needed is cut off. The resulting hole is carefully welded.
In the place where the new pipe is supposed to be placed, a hole is made with a drill.
A pipe of the required length is welded to the resulting hole.
The crane is mounted using a special tape or ordinary tow and paint - this will provide the necessary seal.
A branch is installed to the stove and other household appliances, but already with the help of threaded connections - the welding work is over.
The gas pipe (both the old section and the newly welded one) must be securely fastened to the wall.

Note:having let gas into the already transferred pipe, it is necessary to make sure that there is no leakage. This is done with an ordinary soap solution - it is applied with a brush to all connections on the gas pipe, and if a bubble appears in at least one place, then you must immediately stop the flow of gas into the pipe and do all the work again according to the above step-by-step instructions.

If a specialist is invited for the type of work in question, then do not forget to check if he has a special permit for carrying out the transfer of a gas pipe.

Many people try to carry out the transfer of a gas pipe with a flexible bellows hose - this is prohibited. This type of hose can only be used to connect gas household appliances and its length should not exceed 2 meters.

How to draw up and agree on the transfer of a gas pipe

This work is associated with a risk to life and therefore the transfer of the gas pipe must be documented. What needs to be done for this:

Find a gas service organization at your place of residence - you need to apply for the transfer of a gas pipe. According to this application, a master comes to the house, who inspects the place, determines the possibility of transferring, makes calculations and makes an estimate.
After the work is paid, a day is appointed for the transfer of the gas pipe. Do not forget to check in advance for the availability of certificates / permits from the organization to carry out such work.
The specialists who arrived on the appointed day must present their documents, and the customer must check the dates of their last recertification.
After completion of work, all changes must be made to the gas passport.

How should the gas system be located correctly

The gas pipeline in the apartment / house should be located so that it has free access - the system must be periodically inspected and repaired. Around the gas pipeline in the apartment / house there should not be sewer or water communications. In addition, the distances that are permissible between the gas pipeline and telecommunication lines must be fully respected.

Brackets, hooks, hangers and clamps can be used to fasten gas pipes to the wall. And according to the standards, all gas pipes are painted, for which only waterproof paints are used.

Any work related to the gas pipeline, including the transfer of the pipe, should be carried out only as a last resort, when it is really necessary - you should not “disturb” the gas pipeline system once again. But even if such a need arose, it is advisable to invite a specialist with a permit to carry out the work - the risk of accidents during work and during subsequent operation will decrease to zero.