Kitchen apron styling technology on the wall and in the corners. Beautiful apron in the kitchen with your own hands Laying the kitchen apron from the tile do it yourself

The apron is customary called the vertical part of the wall, tying together hinged cabinets and a countertop.
The apron must be made of a material that is easily clean is not affected by chemicals, resistant to temperature drops.
Most often, the apron is laid out from ceramic tiles. A wide variety of colors, drawings, ornaments, sizes allows you to create an aprons from ceramic tiles not only to protect the wall surface, but also to improve the design of the room. To find out how to spread the apron in the kitchen with tiles, it is enough to familiarize yourself with our article.

What is better to start?

Work begins with the calculation of the desired amount of material, determining the method of laying the tile, preparation of the concomitant material and tool.
Let's start with the method of laying tiles.
The standard laying method is most often used, in which the tile is placed horizontal rows. It is also called basic. There is still a diagonal method of laying tiles.
By the cost of a diagonal way more expensive.
Do not forget when working with ceramic tiles marriage is inevitable because of its fragility.

Calculating the total area of \u200b\u200bthe apron, divide the area of \u200b\u200bone tile and, adding another 10% to the resulting quantity, get the desired amount of tiles.
It remains to clarify how to lay an apron in the kitchen with your own hands and proceed to work.

Basic Terms of Staying Apron in Kitchen Tile

Before starting stacking apron, read the useful tips:

It is recommended to make the height of the apron greater than the distance from the table to the lower edge of the mounted cabinets.
The lower part of the apron should be located 2 cm. Below the edges of the table top.
The apron is either on the entire area of \u200b\u200bthe vertical wall or selectively: above the hob and washing.
As a rule, the distance from the table top to the upper boxes is from 55 cm. Up to 60 cm.

Order laying tiles on apron

An apron can lay out anyone who knows how to hold a trowel in his hands.
A few words about the tools.
You will need a trowel, three types of spatulas: gear, ordinary and rubber for grouting seams. Control flatness is best rack and building level. Cut the tile is preferable to tiles.
Do not forget about pencil and ruler, do not perform marking without them.
All these accessories will help you lay out apron in the kitchen with your own hands.
In order to learn how to put a thread apron in the kitchen, you must correctly perform the preparatory stage.
Having placed the area for laying the tiles, proceed to the preparation of the surface:

be sure to remove the old coating;
deleted to brickwork Old tiles and plaster;
rake tested surface flatness;
cement mortar or plaster mixtures align the surface;
ground the wall.

To remove the old tile, spread the protective film on the floor, cover the furniture and kitchen utensils.
Tile is removed using a perforator or manually using chisel and hammer.
If the plaster crept on all, it must be removed to brickwork.
After stripping, the surface of the wall is processed by primer.
And how to lay an apron from tiles in the kitchen, if the knowledge is minimum?

To correctly lay out the apron in the kitchen, start working with markup.
You will need a cord, with which the lower horizontal level is fought off.
The markup applies a metal profile for drywall and is attached to the wall of a dowel-nail. The profile installation guarantees you from the collapse of the stacked ceramic tile and will allow you to smoothly lay the first row.
The vertical line is chosen in the center with a plumb and cord.

The tile is placed on a glue or with a tiled cement solution. Learn how much you need tile glue will help.

To lay out an apron from tiles in the kitchen, you must first cook glue. Glue divorces according to the attached instructions with a drill.
Better, if you use a special nozzle for a drill.

But tips on how to lay a tile on apron.
Laying the apron in the kitchen start from the bottom row, from the middle of the surface to the edges.
Before laying, lay out the tile on the floor through the dividing crosses. This will allow you to see the final picture.

Stop the kitchen apron from the tile is best in the rows. The next row is stacked after the installation of the entire previous series.
It is allowed to lay a tile on the apron not only with a solid, but also a square-nesting method.

The glue is evenly applied to the tile, it is smeared on the tile with a toothed spatula, and the tile is placed on the apron. It is best to use a spatula with teeth with a height of up to 6 mm.
Tile should be applied to the wall, slightly press, if necessary, sweep the rubber image.
Each rings check on horizontality and verticality with the help of a construction level, and the resulting plane of the rail.
It remains to clarify how to lay a tile in the kitchen apron.
Placeing the tile on the apron, pay attention to the flatness of the surface obtained. If the tile drowned or its corners protrude, the tile is removed, the adhesive is added or deleted. The tile is re-applied to the surface.
Do not hurry. Each subsequent tile is laid similarly.

In places of jacks of tiles, install crossings.
When you laid all the entire tiles on the apron, you can start gluing pieces.
Thoroughly measure each piece, bring the dimensions on the workpiece and cut the tile cutter.
Try, blanks.
If necessary, drilled with diamond drills.
Controlling tile laying on apron is produced the next day. , I can watch the video.

If voids are detected under the tile, the tile is pulled out, cleaned from glue and sticks again.

In the last moment the cross are removed, and the metal profile is removed. You installed it at the bottom of the apron design.
At the next stage, after complete drying, the apron of ceramic tiles proceed to clean the surface. Wash the sponge is best divorced in warm water with detergents.

Next, you need to take a wooden or plastic wand and thoroughly clean the seams, then wipe the surface with a cloth.

Laying the tiles on the apron ends with the grout of the seams. We know. Grout rubs into seams using a rubber spatula. After half an hour, the residues of the grout are removed, the tile surface is thoroughly wiping with a sponge or cloth. With the help of the electrical wire, seams are aligned.
Now you are completely clear how to lay an apron in the kitchen with your own hands.
But several useful tips will not hurt. Method, or.

laying the apron in the kitchen, you can not only from the traditional tile;
special tile sets with decorative modules are available;
do not overdo the decor;
it is recommended to combine matte countertops with similar surfaces of the apron;
for visual expansion of the room, it is advisable to use tiles of light tones.

It all depends on your addiction and taste. Next, video on the laying of ceramic tiles on the apron will help to understand the intricacies of work.

Modern kitchen differs not only by a large number of devices that facilitate the work of the hostess - its main feature is a thoughtful interior. It is a combination of a number of factors that makes stay in this room enjoyable. Can a person preparing to spoil the mood because of the fat splashing on the wall? Yes, if this surface is not protected. Lower the tile all the kitchen is not everyone can afford, but make a apron completely forces to many.

What is apron? It is closed by various decorative material part of the working wall - between the table with a stove and cabinets. In this article we will tell you how to lay an apron from tiles in the kitchen.

Advantages of using tiles for apron

As already mentioned, various materials can be used for apron, but the tile is most practical.

It reliably protect the wall.
She has high strength.
This facing material is wear-resistant.
It is not afraid of the inherent moisture kitchen and fat getting.
Such an environmentally friendly coating allows you to create an attractive design.
From the tile you can easily remove almost any contamination.

Where to begin

If furniture is installed, then simplide the distance from the top of the table top to the bottom of the cabinets - so you can calculate the amount of tile required. Most often it happens within 60-80 cm, but above the slab, it may be necessary to lay a few more tiles.

Calculating the required number of tiles, you can go to the store. Since consumables and tools are required, check the list, if you have everything. We will need:

tile;
crosses (there are different sizes, but the most chassis is 2 mm);
grinding for walls;
glue for tile (at the rate of 6-7 kg per 1 m 2);
waterproof grout for seams;
grinding primer;
rubber spatula (for work with grout);
ordinary spatula;
a spatula with a comb;
roulette;
construction level (bubble);
electrode with a nozzle mixer;
tiles (as needed);
sD profile.

If the walls do not clean, then the tile will not have a reliable clutch with the wall and can fall off.

If this is not a new building, it will be necessary to clean the wall from the raids or paint. This will require some tools and devices applicable to a specific case. Consider in more detail the type of applied coating and the way to remove it.

Wallpaper. To remove them, a bucket with warm water and a handful of washing powder will be required. For wallpaper, cuts are chaotic, and then the entire surface is abundantly wetted by the prepared fluid. After some time, the wallpaper is splashing, and they can be removed by a narrow spatula.
Tile. It will take a perforator with a nozzle blade (or a hammer and chisel). The direction of impact should be sent under the tile, otherwise you can beat off the plaster. Be sure to need protection, since the tile shoes cries, and these small and sharp fragments are scattered in different directions.
Paint. Depending on how firmly it holds, a different tool will be required. It may be a narrow spatula, scraper, construction hairdryer and even a perforator with a spatula.
Raids. The easiest way to remove the spatula, scraping the applied layer. The work is dusty, so you can twist them with soapy water; stick newspapers and then tear off; Cleaner with a vacuum cleaner (not domestic).
Plaster. The available plaster can be very low quality, as the builders "forgot" to put in it the desired amount of cement. Often it is possible to strengthen the fragment of the wall intended under the tile, applying a strengthening impregnation for plaster. If this option is not suitable, it is better to remove the layer of plaster from the whole wall to a solid foundation and shook out again.

Some owners decided to clear from the plaster only part of the wall on which the tile laying will be made, and then complete the decoration to the remaining coating. It should be borne in mind that the layer of plaster can be unequal in different places.

What to choose a tile

With a large tile work easier. Most often, 20 × 30 cm elements are used for the manufacture of apron, but this is not a rule. One like the little tile, the other is large, and the third is a mosaic. Someone likes a glossy tile, and someone matte. The listing can be continued for a very long time, but it is better to see the photo at the end of the article and choose the option you like.

Preparatory work and laying

It is best when the apron is done at the kitchen repair stage, but some owners decide to correct this error at the stage of operation of the room. For this reason, explaining how to lay out the tile, let's start with the preparatory work.

Digit the line on the top of the table top and the bottom edge of the cabinets on the wall.
You need to move away from the wall and remove the cabinets. They need to be made or at least move away so that they do not interfere with work, but in this case the furniture remaining in the kitchen needs to be covered (for example, a plastic film), protecting it from dust.
Now the wall lines are clearly visible on the wall. Wire the distance from them to the floor and write down this data. If the furniture is new, then these actions are not needed. Note that if you do not have a special order, then in the acquired furniture, the table top is at an altitude of 86 cm, so it is better to start the tile laying by postponing the distance of 84 cm.
So, at a given altitude, we fix the profile by checking the level of its horizontal location. If the apron is on the side wall, then there you need to immediately do a similar operation.
With the help of a roulette, find the middle of the wall and apply the label in this place - it will be the first tile.
Do not rush to immediately begin to stick tiles. First make fitting, laying out the prepared facing material on the profile. Having done this, you will see how to use the marked point - it will be in the middle of the tile or from the edge. It may happen that it is not enough for several millimeters to the edge of the wall, in which case it will be possible to take advantage of wider cross.

Now you need to prepare the surface. If the wall is not downloaded yet, then do it.
After some time, a thin layer of acquired glue should be applied to a small wall surface, then apply the comb on the tile and glue the wall. Thanks to such actions, the tile will not bounce off the surface.
Check the position of the tile by the level, and until the glue grabbed, align it. In the same procedure, the rest of the tile.
If the tile must be trimmed, then do it with a stoveture, as the grinder is very hard to perform smooth cut.
After gluing every 8-10 pieces of a tile, you need to remove the flaps from it, wiping the surface with a wet sponge.
Since the apron acts beyond the walls, then its edges can be sealing with putty.
After a day, you can remove crossbars from the seams. If they are pulled out with difficulty, you can get the edge of the bike knitting needles and to improve them with this adaptation.

Between the tile seams, the remaining glue must be immediately removed and cleaned this space.

Not everyone immediately acquire the grout, as they want to pick it up to the tile. If you have not yet decided on color, you can cut off the strips of colored paper, and in turn applying to the seams, you will see what you most liked.

Grout is sold in a powder condition or in the form of a finished mixture located in small buckets.

It is exactly what you need is, in most cases, it is possible without any problems, but it is the process of grouting to many with difficulty. Let's start in order.

Divide a small amount of grout in the container, from which it will be convenient to get a rubber spatula. Someone goes to another way, and first picks up a mixture with a narrow metal spatula, and then removes it with rubber.
Fill out the composition of the slot between adjacent tiles, racing it with a rubber spatula.
Now you will need a bucket with warm water and a sponge.

After the grout is applied, the sponge squeezed can be sown. Essentially, the sponge is spuning the applied mass. If you put great efforts or wipe with a non-viable sponge, then most likely it will be removed the large layer of grouts and all work will have to be reinstalled.
Pull remnants need to be removed from the tile. Divorces will remain, but it is quite normal - after the decorative mass is frozen, the tile can be easily laundered.
At the last stage, the treated seams are impregnated with a special impregnation. It will protect the grout from penetrating moisture and fat.

Now it remains to clean up the kitchen and place the furniture.

First you need to hang cabinets, because then it will not do it.

Having laid out the kitchen apron with your own hands, you will not only save, but also get moral satisfaction.

Video

After watching this video, you will still better understand how to put an apron from the tile on your own in the kitchen, and smoothly and beautiful:

Photo

26-05-2015

An apron of ceramic tiles for the kitchen is one of the most common surface finishing methods over the kitchen tabletop, a stove and sink. An apron from tile provides protection of walls from fat, dirty water and other liquids. The surface is very easily cleaned and takes its original look. Among all other advantages of such a design, it is possible to allocate its independent facilities. Having understood in how the laying of tiles in the kitchen on the apron is performed, you can make your kitchen more beautiful and comfortable.

How to choose a tile on apron?

Before laying the tile, you need to choose a suitable tile. Almost any wall tile can be used for facing the wall. You only need to choose it with the following recommendations:

The more product size is, the less time you have to spend on their laying. However, along with this apron in the kitchen, laid out of a small tile, looks much more beautiful. The optimal option is the tile of the side of about 100 mm.
Take into account the fact that the apron will be very quickly polluted, so it needs to be washed regularly. In view of this, it is better to abandon the laying of tiles with a relief surface.

After you decide on the type of tile, you need to calculate the required amount of material. The obtained estimated value should be added about 10-15% on the climb and marriage.

For laying apron in the kitchen, not only tiles will need, but also additional materials and tools, namely:

Glue or cement mortar. Do not save on such trifles. It is better to buy high-quality glue from the well-known manufacturer. Let it cost a little more expensive, but the laying of the tile, made using such a material, will pass as easily as possible, and the finished coating will last for a very long time.
Water-resistant grout for interputric seams. Pick up such a composition, the color of which would be combined with the tile and with the design of the entire room. You can pick up both the grout in the tone and the composition of the contrasting color.
Primer. It is possible to do without it, but the tile is better connected precisely with a projected surface.
Crossings.
Graters for glue.
Toothed spatula.
Normal and rubber spatulas.
Construction mixer or drill with a nozzle.
Level.
Clean rags and sponges.
Roulette.
Bulgarian or stovetur (glass cutter).

Before laying the tiles, you need to get rid of the old finish. Removing wallpaper, plaster and paint usually do not cause problems. And to remove tiles you will need special tools. It is more convenient to do this with a perforator or bit. The finishing strip is performed by a metal brush.

Back to the category

Preparation of the working surface and glue for tile

When you collect and buy all the necessary tools and materials, you can start working. However, before you start putting the tile, you will have to spend some time and strength to prepare the surface.

First you will need to get rid of the old finish. This was mentioned above. Next you will need to take a small ax and chisel. With the help of these tools you will apply small notches, thanks to which the tile clutch with the wall will be improved. On 1 m² you need to make about 150-200 notches.

Approximately 2 hours before you start laying the tile, treat the surface of the penetrating primer. Be sure to mark the walls. If this is not done, there is a high probability that the apron from tiles in the kitchen will be laid unevenly, as a result, it will be far from an ideal picture.

Marking is performed taking into account the size of the kitchen headset. Mark the bottom and top lines on the wall, between which the alignment of the apron from tiles in the kitchen will be performed. The height is recommended to select with the use of whole tiles. The finish must go a little behind the edge of the table top. For greater convenience, take a special guide profile or a wooden bar and secure at the bottom edge. The first series of ceramic tiles will be relying on this bar. Additionally, this will ensure the horizontal of the rows.

If you have never been engaged in laying tiles in the kitchen, before you begin to work, additionally mark the apron using horizontal and vertical lines. This will allow you to control the location of the ceramic tile.

Before stacking an apron from the tile in the kitchen, you should choose a glue composition. The result and quality of the finished surface depends on the quality of this composition. Before preparing a mixture or using the finished composition, be sure to read the manufacturer's instructions. As a rule, recommendations from different manufacturers are practically no different. The glue needs to be prepared immediately before the start of the device apron from tiles in the kitchen. To do this, you need to take the clean capacity of the appropriate volume, pour water into it, add a dry component, and then mix the mixture thoroughly. It is necessary to interfere until all the lumps disappear. Next, you will need to take a building mixer or drill with an appropriate nozzle and mix the mixture until it turns into a homogeneous mass. Leave the solution for 10-15 minutes and mix again.

Prepare such a quantity of the mixture that you can spend a few hours after cooking.

If you have never been done before laying tiles in the kitchen, prepare glue in small portions. In the future, it is impossible to breed the dried composition with water.

Ceramic kitchen apron is the most popular way of design work area. It protects the wall from the destructive effects of steam, bold splashes, droplets of dirty water in the sink. The undoubted advantage of such a design is the possibility of making it with their own hands.

In the article, we will tell how correctly laying an apron of tiles in the kitchen in the corners and on a flat surface, which materials and tools are necessary for this, what errors should be avoided, how much such work will cost and much more.

Methods of masonry tile

The most optimal solution is to lay ceramic tiles after kitchen settings. There are several reasons for this:

The geometry of the collected enclosures is never set in terms of clearly, because of which the tile can shift several millimeters. Running along the edges in the amount can reach one or more centimeter, which is especially noticeable when laying small tiles of 10 per 10 cm.
Not all suspended kitchen cabinets are adapted for fastening on the wall, taking into account the laid tile. Often the bottom of the suspended module turns out of outpass, which is clearly visible from the end. If the lower modules are adjacent to the tile, the slot is often formed between them.
The most important thing is after installing the furniture headset easier to select the design of the apron and the tone combination of the tile.

As for the methods of laying, chess pattern, one-color kitchen apron is most popular among the hosts.

In addition to these classic options, ceramic tiles can be laid on the wall:

in a straight line;

diagonal;

with a little displacement;

kaleidoscope.

In addition, the tile can be put on a wicker, a labyrinth or christmas tree.

If the above options are not suitable for you, you can proceed in this way - from the monochrome tile to perform the main background and ornament it to others.

We offer several laying options:

Preliminary work

After it was decided with the way of laying the tile and purchased the necessary amount of it, you can work with preparatory work, which include several stages.

Tools and materials

It is clear that for facing the kitchen wall of one tile will not be enough. In addition, you will need to prepare the desired tool and material. The photo contains everything you need for independent work.

It will also be necessary:

Tile glue. It is better not to save on his quality, otherwise the tile after 3-4 years will begin to disappear. The best stamps are considered:

Mosaik Ivsil. - white glue with excellent resistance to moisture and high strength. This is an excellent solution for styling kitchen apron, trim saunas, baths, pools.

Blend for grouting seams (In the obligatory case, should be waterproof). Its color is selected for the inner decoration of the kitchen, it can contrast or combine with a tile. Below will list the most effective, sought-after materials:

Mapei. - Popular Italian brand, whose products have been widely used in kitchens, swimming pools, bathrooms. A wide variety of colors allows you to choose a mixture for any type of ceramics. In addition, the company produces coloring compounds to update yellowing gaps yellowed;
Kiilto. - Finnish mixture for grouting, lies for a long time, it is recommended to use beginner masters in the work.

Tools that will be needed to perform work with your own hands, are familiar to each tiler. It:

rubber grates to fill with a mixture of seams and corners;
spatula with gear, smooth edges for uniform application of adhesive composition;
electric drill for mixing the mixture;
level, roulette to perform markup, control the correctness of the masonry;
sponges of foam rubber for cleaning the surface.

In addition, it will take equipment for cutting a tile - a glass cutter or a corner cutting machine for ceramics. Cut the tile for laying in the corners without such a tool is unlikely to succeed.

Calculation of the number of tiles

The amount of tile determines the method of laying, size and width of the apron in the kitchen. The calculation of the material is required for each construction and repair project, because the following are taken into account nuances:

Tip! Purchase materials needed with a small margin - about 15%, because when cutting and transporting damage is possible.

When you plan to lay out a complex geometric ornament with a patterned edging or diagonal strips from the tile, it is necessary to depict the calculation scheme in advance on the paper sheet, which will minimize the consumption of the material.

It may seem that the folding of the kitchen apron is a fairly simple occupation. It is only necessary to prepare the walls, zone over the working surface to issue a tile, withdraw the sockets, electrically switches and attach a decorative plinth. In fact, when performing the above stages of the workflow, many nuances should be taken into account.

Preparation of walls

The tile is quite a capricious material, it neatly and beautifully looks only on the perfectly smooth surface. Ceramic tile will not be bent, so any irregularities of the wall will cause its damage.

Technology of work

Below we will tell you how to put ceramic tiles on a flat surface.

So, at the first stage, the boundaries of the future kitchen apron mark on the wall of the pencil, if necessary, additional lines are also applied, for example, demonstrating the finding of another tile, strips, a decorative plastic curb, etc.
Initially, the walls of the walls that are in view of appearance are made. When the workspace takes one wall, then the tile is placed from the center. It is necessarily monitored that the distance to one and the other side is the same, the masonry is symmetric. On the G-figurative kitchen, it is better to lay out the wall in sight.
To the surface, the steel profile or the square, rectangular secting bar is attached horizontally, it will warn the tile sideways under its own weight until the adhesive composition is frozen.
Prepare glue or cement mixture needed before applying. For this, the dry mixture is stirred in the necessary proportions with a manual mixer with a manual mixer for 10-20 minutes.
Important! The solution must be used for 2-3 hours, otherwise it will lose its binding properties. When you do not have enough skill and working paced low, the glue is recommended to prepare small portions, because it is impossible to breed a solidified solution.
With the help of a smooth spatula, the adhesive solution is laid out on the surface of the wall, resurrected by a toothed tool. The mixture can be applied directly to the tile - the question of experience and comfort.
The stove is placed on the wall, it is a little attached, after which the image is closed on one and the other diagonal to push the air. After that, the vertical is checked by the level. When the laying is performed from the edge, the corner is mounted on the wall. Some time, the adhesive mixture retains a small mobility so if the tile has been laid incorrectly, it can be removed, covered with a new layer and applied again, press to the surface.
The subsequent element falls on the edge, there should be a small gap between it and the previous one. To obtain the same thickness of the slots between the ceramic tiles plastic crosses are installed.
Each subsequent row falls only after setting the previous one. The initial row is recommended to leave for frost for 24 hours, it will serve as a "guideline" - the subsequent laying will be aligned.
To decorate the inner corner, a special M-shaped profile is used: it is attached to the wall by self-drawing, the tile is based on it. External angles are laid out with a cafeter with cut at an angle of 45 ° edges. For this, the Bulgarian and sandpaper shallow fraction are used.
For cutting of the material, a plottery is used, it is done from the wrong side the holes for the pipes, switches. Installation of outlets is carried out after all construction and repair work.
At the final stage, the kitchen apron is tested with a rubber or wooden hammer when emptiness is detected - the muffled sound is heard, the tile is removed and stacked again.

Sealing places of compound

A neat appearance of the kitchen apron gives the scabs. The gaps between the tiles must be embellished in a mandatory case, because fat is accumulated, dirt. Professional masters recommend from time to time to dismantle the old mixture, apply a new one to her place.

Methods of tile masonry at corners

So, how to lay tiles in corners? There are two options for its alignment:

straightforward - The elements are put one to another at right angles, so that one end is in sight, the other - hiding the top element. When the tile must be adjusted in size, then the cropped edge is installed on the bottom. The disadvantage of this method consider the formation of a seam on the connection. Though it is masked by a white or colored grout, the appearance of the surface is impaired non-ideal;

perpendicular In the corners - suitable for registration of protruding borders. The main thing is that the lining has not been visible from below. For this, the tile is glued in such a way that the horizontal tile "hung" above the edge. Note that the declared angle will look neatly only when the canopy is not exceeding six millimeters, and the edge will be holistic.

Cutting edges

Get smooth seams on the junction allows you to live for the inner angle - trimming the end of the tile under 45 °, which is performed:

a corner car;
roller stoves;
small emery paper.

The ideal solution is to use electrical trail with the inclined design of the bed.

How to make a neat corner of the kitchen apron? For this, tiles are cut, put on the solution into the angle so that the ends coincide and formed a solid coating. Beginner masters do such work will not be easy. To begin with, they need to be trained.

Important! The laying of the tile in the corners should be performed on the perfectly smooth wall surface, otherwise the width of the adhesive composition will be different, which will adversely affect the position of the adjacent elements.

The use of trimes

They are decorative PVC profiles that allow you to form a corner of a certain orientation. The exterior protrusions are covered with lining of the M-shaped form, and the internal - layouts of the shape of the depressed arc. Convex narrow tapes are widely used.

Reply still on such a question - what to swing a decorative corner to ceramic tiles? Enjoy for this:

liquid nails;
silicone sealant;
glue.

Typically, such linings have a special design that allows them to be placed on the solution. The special record goes under the stove, fastened with glue. This method of installation is easy and simple, as a result, the surface of the apron takes care of a neat, beautiful appearance, while the connection site is securely protected from microbes, dirt, water. To attach trimmers to external angles, use sealant on silicone or acrylic basis.

G-shaped tile

To decorate the kitchen apron in the corners, you can use ceramic tiles of a special form. Many modern producers produce special angular parts from clay, which are connected to 90 ° each, forming perpendicularly connected parts. Laying such a tile - extremely simple work. On a flat surface, it is attached to a special solution.

Important! When you use M-shaped parts, then they fall on the pured wall first, the entire remaining tile is laid out of them.

Differences between the design of the inner and external angle

Performing work, it is important not to forget about the differences between external and internal M-figurative details. Some are protruding areas, others - form a space in which the surfaces of the adjacent walls of the kitchen are intersect.

The greatest difference between external, internal angles is noticeable when installing decorative corners of PVC. Trims differ in the form and dimensions, are installed in different fields of the apron, simultaneously perform decorative, protective functions.

It is worth considering that sticking the inner cutting tile is easier, because With a slight deviation from the norm of the situation, it is possible to fix the grout or adhesive composition.

Note that colored fillers look beautifully only on the inner corners, due to the fact that over time they crumble and fall out, they are additionally covered with profiles that do not just protect the surface from external damage, but also remarkably decorate it.

Elimination of flaws

Non-starting tiles rarely manage tile laying on the wall correctly. But it is possible to eliminate some defects. So, when you put the corner, the angle does not go out, to eliminate the flaw using the addition of a small amount of cement mortar.

Performing an end of the end, the bias of 45 ° is not always obtained - it's unnecessary by manually by sandpaper with a shallow fraction. When it turned out uneven joint, it is possible to eliminate the problem in two ways: the gap to mask the colored grout or after setting the mixture to the outer angle with liquid nails or silicone to attach a decorative profile.

How much is it worth putting apron in the kitchen yourself? Since you will not use the help of professional masters, you will have to spend only on materials and tools. So, you will need to buy:

Cafe - 1m 2 will cost 500-3000 rubles, depending on the quality, brand, size, drawing, etc.
The glue composition is packaged in bags of 25 kilograms, 5-7 kg grabs one square meter, costs about 300-400 rubles.
Grout - 500-800 rubles.
Plastic crosses will cost 40-60 rubles per pack.
The cost of a gear, rubber spatula, a cylinder, stoveturis and the like. - Depends on the quality, dimensions of the tools. On average, you will have to lay out about 2-3 thousand rubles.

In addition, roulette, pencil, sponges, sealant, silicone seal come in handy - another 1.5-2 thousand rubles. As you can see, with the average size of the kitchen apron, the purchase of materials and the tool will cost you 6-8 thousand rubles, which is significantly cheaper than professional tiler services.

We hope after familiarization with the article you will not have any questions, how to put apron in the kitchen. In the presence of the necessary material and tools, it can be performed on its own forces without costly services of third-party specialists. In the video presented you will find detailed information on the subject of interest, see the phased performance and get answers to all questions:

When repairs are in the kitchen, the owners want to make it the most practical, original. These properties of the room can give an apron of tile, which will protect the wall during cooking and will look very aesthetically, attracting the attention of guests.

The main material for apron is ceramics. It has indispensable quality: resistant to high temperatures, fat, moisture, household chemicals. Putting it yourself quite possible if you use the relevant recommendations. But professionals will make faster and better.

Before reaching this part of the repair, you need to carefully measure and think over the design of the future apron into the kitchen from the tile in accordance with the general design of the room.

Watch an interesting video. The masters laid apron in 10 minutes. Quickly and clearly 🙂

A little bit about size

The tile on the kitchen is of different sizes, the apron is better to take a large - 20 * 30.

There are several nuances when determining the area of \u200b\u200bceramic coating.

the height of the lower edge relative to the floor level is calculated simply: the label is placed 5 cm below the table top;

upper edge - above 60-70 cm, depending on the height of the upper row of furniture;

at the installation site, the apron is postponed to the place of its contact with the wall;

the length of the coating is better throughout the table top;

the amount of material directly depends on the masonry method.

Standard is the most economical, for independent masonry it is advantageous. Diagonal - most expensive due to trimming angles.

The larger the size of the tile, the faster it will be laid, because the area is reduced quickly, and there is less junctions.

How to choose a tile?

In building stores, the range of classical ceramics on the apron for the kitchen is very diverse. You can use the following tips:

rate Composition: The best option will be the stove with additional protection against chemistry with the labeling "AA", porous and covered with icing;

right: ceramics stands in different ways, in the kitchen on the apron you can not take too expensive, the quality is unlikely to deteriorate;

choose a ceramic tile for several tones lighter or darker color of wallpaper or furniture, but in the same range (if you really want something unusual, you can lay out an apron with a ceramics of another color, but choose the appropriate curtains, blinds or interior items (panel, clock, vases , dishes);

pay attention to classic colors: white, beige (they can pick up stickers from vinyl, the apron will always be new, original); Such a tile is suitable for any kitchen, apron looks elegant;

inquire if there is a ceramic tile into a kitchen with a finished decor to lay out apron. Designers offer many interesting options: mosaic, plot and landscape panels, always popular clinker (imitating brickwork), ceramics with photo printing. After watching the catalog, you can find an unexpected solution for apron from tiles to your kitchen.

Purchase a tile in such a quantity to have enough "with a margin" in case of breakdown.

What is needed for laying?

Deciding with the tile, it is necessary to look at other departments: at home may not turn out to be the entire set of necessary materials and tools. It is necessary to progress and purchase special glue, primer, waterproof grout and decor (if color tile).

From the tools will be required:

various spatulas (rubber, toothed);
trowel or spatula to apply glue;
building levels (long, short) and pencil;
roulette.

When installing the apron, it is not without a grinder or tile cutter, fasteners for drywall, drill, remote crossing and dowels. A sponge and buckets for water and glue are used.

The kitchen tile is chosen, the apron is calculated and thought out, materials and tools in place. You can proceed to work.

How to prepare the wall?

High-quality preparation of the foundation will be a guarantee of durability of the kitchen apron. First of all, you need to correctly remove the old basis.

Wallpaper. On paper to make cuts and moisten with soapy water. When the wallpaper is wedged and detached, they are easy to remove the spatula. The remains wash off with water and give the wall to dry. Wooden wall is better treated with Olife.

Paint. Many masters do not recommend removing paint if it is well lied. "Problem" places can be cleaned and primed.

Cables for outlets and appliances. If they pass under the apron, they need to be put in the shoes, the recesses for which you need to do in the wall. The irregularities are ground, the wire is closed with plaster.

Purified surface. If it is uneven, you can use plaster, putty or plasterboard. After drying the solutions, the surface is ground.

On the aligned wall make notches so that the glue is better grabbed.

On the wall of the kitchen can be fungus! It must be processed by a special solution!

A significant stage - applying markup. The lower edge of the apron will be relying on a thin wooden bar or metal profile (temporary measure) attached to the wall (temporary measure). The accuracy of their location should be measured by the construction level. Vertical lines that need to be buried strictly perpendicular to the rail, help control the accuracy of masonry.

The preparation of the adhesive solution is carried out in accordance with the instructions.

Do not dissolve a lot of glue! It quickly grabs and loses properties!

How does the tile laid out?

If the stacker is a novice, it is better to lay a tile for a kitchen apron by the base method, that is, in the rows, starting below.

The glue can be applied in two ways: on the tile itself and on the wall. Specialists disagree in opinions, which one is better. The main thing is that ceramics are good "sat down" and the glue under it is evenly distributed.

Yet more practical and more convenient to apply the adhesive composition on the wall, so you can put 2-3 tiles at the same time. In this case, it is not excluded to apply a very thin layer of glue and on them too.

You can start laying from the edge of the apron and from the middle - as more convenient. The first tile is the most important, when it is installed, do not do without a level or a corner that can be temporarily installed. When you lay out at the same time several pieces, the entire addition fragment is checked.

glue apply on the wall with a thin spatula under area 2 or 3 tiles, toothed to make grooves;

the tile attach to the wall by pressing, which should be uniform. The excess glue is placed by tapping along the tile area. The accuracy of the installation is checked by the level.

Crossings in horizontal and vertical seams are installed to withstand the same distance between the tiles.

If irregularities remained on the wall, it is permissible to put a thicker layer of glue in this place. First, the first row is mounted. On it - all "responsibility" for the next ranks. It will be better if it gives it enough time for graze (within 24 hours).

Each subsequent row upload only after the previous bread!

In the locations of the wires and installation of sockets on ceramics, you need to correctly make markers for which the holes will be cut out. After installing 10-12 tiles, be sure to wipe the rod or sponge to warn the pouring of the glue on the surface.

What and how to cut a tile?

There is a need to cut ceramics. This can be done with the help of a grinder or roller glass cutter. If you need to cut a lot, it is better to use the tiles. All actions are performed on the facial side of the tile.

Bulgarian. There will be fine dust, so the gauze bandage or respirator does not prevent. With the help of a grinder on the tile make an incision, after which it breaks well. Minus - uneven edges that will have to be treated with a sandpaper or file.

Roller glass cutter. Pre-tile hold 40 minutes in water. According to the intended line with pressure to draw a line. Put the tile on the edge of the table strictly according to this feature. Reverse the tile with a sharp movement. When laying, the factory edge is attached from the side of the glued tile.

Platekorez. Act according to instructions.