How to make textured rollers with your own hands. We make a roller for walls with your own hands structural roller under the stone

Exists a large number of facing materialswhich are widely used today when creating beautiful interior indoors. One of the most sought-after finishes is decorative plaster. There are a lot of varieties, for example, the texture painting of the walls. To perform this work requires a special roller, which gives the whole facing a special texture. In this article we want to tell you about the necessary set of tools that are required to apply texture paint.

Valikov varieties

If you go to the store to buy a roller for texture paint, then you may face a large variety of this tool. Therefore, we suggest you briefly consider the existing varieties. First of all, we define what a roller. Under the roller is meant a roller that spin around its axis. As a rule, a metal base is used on which shift rollers are dressed. As for the roller itself, it can be covered by various materials. For the roller to work comfortably, it provides a special handle.

If we talk about the existing differences of this tool, then you can select the following:

Type of coating.
Roller width.

So, choosing a roller for painting walls is extremely important to push out these indicators. So, now consider the existing coatings that are used when performing different works.

Varieties of coatings

So, there are several species, the so-called roller coat. It is manufactured from such materials:

Porolon.
Threads.
Velours.
Textural or textured.
Flock and others.

Consider the features of the most popular in the domestic market.

Fur roller

For painting the wall, fur rollers are universal. They can paint the walls absolutely different paints. It can also be paints having an organic basis. You can highlight a number positive Parties Such rollers. When working, they observe moderate absorption of paint. As for the application of the paint itself, it falls uniformly. Therefore, it is very comfortable not even for professionals. It is also important that they do not spray paint on all parties. And if there are minor irregularities on the walls, then there are no special difficulties here.

Villages themselves on the fur roller can be made of different materials, eg:

Natural fur. Fibers of natural fur perfectly absorb paint, which contributes to the uniform distribution of paint along the entire surface of the wall. If we talk for disadvantages, then it is the only one in the process of painting there is a falling out of a villion. And if you bought an inexpensive roller, it can become a real problem, since the walls will remain on the wall, which should be eliminated urgently.
Polyacryl. This is a wonderful replacement of natural fur, as such a roller is deprived of its flaws. And if we talk for his dignity, it is quite affordable cost. But the coat of polyacryl has its own characteristics. Paint with such a roller can only paint on water based. It is also allowed that paint in which there is a minimum amount of aggressive substances. Plus to everything, the polyacryl itself is short-lived.
Polyamide. This material is wear-resistant. It also copes with aggressive media. As a result, such a roller is suitable for absolutely any type of paint. But there is one important minus. When working, they constantly observe splashes.

There are also some differences between such rollers for painting walls. For example, a fur coat may have different length Pile.

Tip! If the wall is rough, then it is recommended to choose a fur coat, which has a big length. Due to this, it is possible to paint high quality all.

So, independently of which material is made of a pile, care is needed behind the roller. And for this should not be applied any particular effort. For example, it is enough to soak it in water after work or in kerosene.

Roller from Foroon

Porpa rubber roller is the cheapest. You can buy it since 30 rubles. This roller is used for water-dispersion paint. This is the paint that is used for processing. window Rams or doors. Of course, the roller from the foam rubber has obvious negative sides, among which:

Short operational period.
If you start working with special intensity, then you will definitely wait for the spray of paint in all directions.
If the surface is relatively uneven, it will be difficult to paint high qualityly.

So, the foam roller for the color of the walls economical solution for small square work. If you have to paint a large area, then do not even think about buying it. Especially, it is not suitable for a wall covered with decorative plaster.

Velira roller

This tool allows the paint with a thin and uniform layer. As a result, painted walls will be smooth. But the final result, in many respects it will depend on how well the preparation of the base wall was performed.

To work velor roller, special skills in the color of the walls are needed. A small marriage in motion can lead to the fact that a defect will be noticeable on the wall. Therefore, it is not surprising that such rollers use predominantly professionals in this profile.

To be objective, this tool has disadvantages. Velor himself absorbs large paint volume. As a result, you have to wet the roller much more often to achieve a good result. This leads to an increase in paint consumption.

Rolls with a smooth surface

There is another kind of tool that has a very smooth surface. It is made of:

Fiber flock.
Polyester.

In the first case, FLOK fibers are made on the basis of polyurethane. The base is tissue. This coating has high strength. Due to this, there is a long operational period. They are used for painting perfectly smooth surface.

As for the tool from the polyester, he likes a synthetic hyprofhen. This roller has beautiful positive characteristics, among which:

Perfectly absorbs paint.
Excellent transfers the tone of paint on the wall.
Fully eliminated the likelihood of transmission of villi on the painted wall.
Long operational term.

So, here we also reviewed the important features and differences in the tool that is used under painting. Now we learn what is the difference between a flat roller for painting walls, which is used for the textured color of the walls.

Decorative paint roller

Under such a tool, the rolls are meant, by means of which the texture, patterns, and the like can be applied to the surface of the wall. There are two main items:

Fact roller. A necessary pattern is applied in advance on its surface.
Structural roller. In this case, there is also a bulk pattern, but the task of which is reduced to applying texture or pattern.

The texture of the wall can be created not only by a special tool, but also by conventional rollers. So you can use special paint For decorative wall processing and rolling the foam roller on it. The effect may turn out original. In fact, there are no strict requirements and rules. You can experiment with different types Coatings.

As for relief rollers, they can be manufactured from a variety of materials: polyurethane, foam rubber and rubber. It follows the one that will allow you to achieve the most desired result. Many prefer precisely polyurethane products, thanks to which you can give the wall an original appearance.

There are also original rollers based on skin and tissue. They are a tampon with folds. Their use allows you to achieve the original and non-standard textures on the walls. For example, some have learned how to create a marble effect and other materials.

The use of textured roller requires special accuracy. When working them, smooth and leisure movements are needed. It is also necessary to render uniform efforts to the surface so that the paint is evenly distributed over the entire surface. Also, due to this, the texture will be beautiful. But remember one an important nuanceThe texture paint is applied with a special spatula, and the texture is formed by pressing the roller.

Among other things, an additional set is required. essential materials For decorative staining of the walls. To perform work with your own hands, you should prepare the following configuration of the tool:

Fact or texture roller.
Tassels of different sizes.
Protective gloves.
Mask to protect the face and respiratory tract.
Rag.
Paper emery.
Tool for stirring paint.
Metal brush.
Disk brush.
Thermopystole.
Special spatula for applying a decorative layer.
Spray.

It is worth noting that this is the main set of tools. And it's not a fact that you will use it all. However, all the listed tools for the color of the walls can be useful to you in one or a different degree. Moreover, some homemade craftsmen decide to replace the basic tool for textured coloring walls self-made.

As a basis, you can take cellophane, skin, fabric, foam rubber or something else. Well, if you have a base for roller. From above, it can be glued with any of the listed materials.

Conclusion

In general, the application of textured paint on the wall is a creative process that requires connecting its fantasy. Although it provides for a special tool for creating texture on the walls, yet it is possible to experiment. You can try a variety of rollers to give a certain wint of the walls. Of course, first try on a small sample so that you can test your know-how.

We hope that this material was useful for you and were able to deal with what exactly you need a tool for applying textured paint not a wall. In addition to everything, we propose to view the prepared video in which you can clearly see how to properly use the selected tool.

For decoration of walls with decorative plaster, a special roller is required. If desired, you can make a factory roller with your own hands. This process is quite exciting and creative and will create an original and exclusive pattern on the walls of any room at home.

Some wizards when finishing walls are limited to the use of a narrow spatula, which can be given the surface of a certain texture, but this effect does not compare with an image obtained as a result of roller processing.

Types of rollers to work with decorative plaster

Initially, all rollers were intended only for work with paint, so the main material for their manufacture served as a fur or foam rubber. The development of technologies appeared tools from foam, rubber and other artificial materials. The basis of the first textured rollers was the largest porolon.

Today, foam, foam, leather or rubber rollers are used to process the surface covered with decorative plaster. In case the tool is manually manufactured, it can be wooden. Craftsmen can cut on wood not only imitation mat or brick masonry, but also complex patterns.

In order to make a structural tool, you need to decide which pattern to decorate the walls of the house. To obtain the necessary prints, rollers must have recesses or protrusions corresponding to the selected pattern. If you need to apply protruding patterns, there must be depressions in the roller, and if the revented projections.

Methods of manufacture of roller do it yourself

There are several uncomplicated methods Production of textured roller for work on decorative plaster. For the manufacture of a tool that imitating brickwork will be required:

roller on rubber-based;
a sharp knife.

The roller must be wide enough. In order for the imitation to the most reminded the original, the surface of the roller must be divided into two channels to 3 equal parts. Then, on each of the parts in checkers, transverse recesses are cut, resembling seams between bricks. The result of the work becomes separated from each other rectangles, which, when prints, become bricks.

To obtain an impression imitating marble, you can use another non-futured way. Here you need to apply a compressed tissue or skin. The material is frozen and in the mint is pasted on the roller with the help of universal glue. When working, such a tool should be slow and uniform. It is necessary to try as long as possible not to tear off the hand from the wall.

In addition, you can use a crumpled foil or polyethylene package that are fixed on the basis of the roller in such a way that the maximum number of folds is obtained. The folds are fixed with scotch and glue.

Unusual effects on plaster are created using tools wrapped with a thick rope or rubber harness. At the same time, the turns should be made in an arbitrary order. If you have a rope with smooth rows, the plaster will have the appearance of natural canvas from bamboo or cane. An uneven winding will create wood imitation.

But this is not all that can be achieved when independent manufacture Structural roller. For example, by gluing a piece of textured fabric (burlap, canvas, etc.) to the working surface, you can get walls with imitation textiles.

An interesting solution looks like and use to create a textured tool of various croup: pea, rice or buckwheat. The surface of the roller is wedged with glue and attaches any of the selected croup. To create certain pictures, only areas in the form of flower, twigs, leaves, etc. can be saved.

Structural rollers with complex patterns

Several dozen years ago, children were entertained in the lessons, cutting out various patterns on erases with scissors. Such a gum could be smeared with a ball handle or a pencil and applied to paper, after which it remained patterns of the pattern.

This principle is used to create structural rollers based on rubber, only here the pattern should be closed on a cylindrical surface. Pictures can be different, each chooses as they are artistic abilities and taste. It is also necessary to take into account that complex patterns are presented certain requirements To apply:

surface treatment is made in the direction from top to bottom;
the following passage is carried out from the previous track, without adhesion or indents.

You can make tools for decorative plaster with help silicone sealant and acrylic putty. Read:

dense foil (from 50 MK);
putty from acrylic;
knitting hook with a rounded smooth end or a tool similar to it;
thin rubber;
glue universal;
silicone sealant;
pistol for sealant.

First of all, it is necessary to apply the selected pattern on the foil, then sell it with a crochet for knitting or another tool. The distance between the pattern elements should not be less than 5 mm. Otherwise, when working with plaster, the pattern will be clogged.

Then it is necessary to fix the embossing with the help of acrylic putty. Initially, the putty is applied to foil, then foil from the putty applied to the working surface of the roller and pressed to create a rounded shape. When the putty dry slightly, it is removed and left until complete drying. The resulting pattern is released from foil and glued to the working surface of the roller.

With the help of silicone sealant and fine rubber, create a pattern on the instrument is even easier. Initially, a piece of rubber is laid out on the table and apply a drawing on it. Then the silicone sealant is neatly extruded on the conducted lines. In this case, it is unwanted to use very complex patterns. Ideal look geometric shapes, simple flowers, waves or leaves. When silicone lines are dried, grind the rubber on working surface tool.

Rollers from rubber and silicone sealant

Quite complex patterns on the decorative plaster can be created using a roller manufactured using beautiful buttons, metal or plastic objects with embossed, plaster elements and artificial leafs from dense materials.

To work, it is necessary to prepare such a quantity of silicone to create a rug size with the working surface of the roller and a thickness of at least 3 mm.

Silicone is laid out on the smooth table and dried slightly. Then, buttons and other prepared items are immersed in another entrepreneurial substance, pre-blurred by any vegetable oil. After complete drying of silicone sealant, objects are extracted, and the rug is glued to the working surface of the roller.

People who do not scare flexible work can make prints for a pattern of rubber with a thickness of at least 1 cm. First of the rubber, the pattern elements are cut. It can be leaves and flowers if a floral ornament is chosen, geometric shapes, wavy lines and even letters.

Each of the elements is glued to the working surface of the roller. There are no restrictions in the pattern. The main thing is that the elements are pasted evenly throughout the roller. In order for the pattern to be as smooth as possible, when gluing it is recommended slightly rounded reverse side Printed to the working surface of elements.

Uncomplicated tips will help choose the drawing on the walls, which will make housing not only aesthetically attractive, but also unique, because it is known for a long time: everything that is created with your own hands with love and desire, only positive emotions delivers.

How is the decorative plaster with a roller, what are these rollers and is there still effective methods applying the necessary texture on the plastered surface?

We will consider the answers to these questions within this article.

Main characteristics

Structural roller for applying decorative plaster is a type of traditional clamping roller.

However, if the traditional malarious tool is designed to apply a smooth paint layer, its structural modification is designed to perform several other tasks. Due to the pressure on the processed surface, structural, or as it is also called a factory roller, gives the surface - volumetric texture.

Currently, a wide range of data of fixtures is presented on the market. Among the wide range of structural rollers, you will probably choose the modification that the interior finish will provide an optimal result.

Select the necessary modification

Textured rollers for decorative plasterhouses there are two main types:

soft (as a rule, made of polyethylene or foam rubber;
rigid (made of rubber and elastic plastic).

Regardless of the variety, these tools "work" like a stamp. When pressed on the surface, the roller drawing remains on the plaster. Thus, by conducting a tool for just laid plastering in various directions, you can get the desired texture.

So, what to choose, structural rollers for decorative plaster with a soft or with a tough working part?

Hard structural roller is optimal solution For processing more viscous compositions. That is, using such a tool, you can work both on just laid and partially fucked. In addition, applying this tool can be applied to the surface complex embossed compositions.

Despite the fact that the price of a hard roller is slightly higher than the cost of soft analogs, this difference is fully justified. First, a tool with a rigid surface will serve not one year, of course, if the proper care will be ensured. And secondly, the range of hard rollers as an order of magnitude wider.

Rubber relief roller is used to molding a coating with a highly eliminated well-pronounced structure. If necessary, a thread roller can be used as an alternative to the embossed tool. But, unfortunately, the darous working part of such a tool is quickly clogged with plastering and needs washing, which makes it difficult to carry out finishing work.

The price of presser and structural rollers twice the cost of equivalent painting modifications. Therefore, choosing one or another model must be traced that there are no cracks and detachals on the rubber layer. Moreover, rubber with applied relief should be qualitatively combined so that the roller does not fall into pieces during operation.

Clamping and structural embossed rollers for decorative plaster with a rare exception are made with thick 8 mm whites. This is explained by the fact that there are significant pressure on the working part of the tool and a more fragile design is simply collapsed.

An essential advantage is the presence of a rubberized handle. Working with an ordinary painting roller, this advantage will not be appreciated, but, if a whole day in the hands of a presser roller, convenience will probably feel.

Foam or polyethylene rollers for applying decorative plaster is a more accessible tool modification. But the purchase of such products is appropriate only if the plaster is done in one instance, since if it is constantly clogged to work with a foam roller, it requires periodic rinsing and does not guarantee such a pressure intensity as using a rubberized tool.

The main sphere of the use of foam rollers is the application of fine coatings on the surface of plaster with different colors and light transitions.

Technology use

Application with a roller of decorative coats of coat is performed as follows.:

We prepare the foundation. We remove all pollution from the surface and significant relief. Next, close all the depressions and align the working surface using the putty. After drying the leveling layer, cover the base of the primer.

Important: putty must be selected in accordance with the type of surface to be in line. More information about the choice and application can in the relevant articles on our portal.

We prepare with your own hands simulating a plaster solution. In order to proceed with the manufacture of a plaster solution, we use a galvanized or plastic bucket and a low-unique drill with a special nozzle.
We open the packaging with the mixture and prepare the solution in strict accordance with the manufacturer's instruction. The dry mixture is thoroughly mixed with water to a homogeneous consistency and the complete absence of lumps.

Tip: If with stirring on small turns around the bucket splashes, try switching the reverse to rotate counterclockwise.

After the solution is ready, add a kel to it and again everything is thoroughly mixed until one-color mass is formed in the container. After that, we give a solution to stand for 5-10 minutes, and proceed to applying.
We pour a small amount of solution into a painting bath and dip a hard roller in it. Then roll the roller on the treated coating. After that, again dip the roller in the bath and repeat the procedure.
We apply a roller lines in one direction so that the bands are invisible and the transitions are not distinguished. The bands can be applied both vertically and horizontally and diagonally, the main thing is to suitably hold the fulfillment.

Is it possible to simplify finishing work? Of course, it is possible, but for this you need to buy a ready-made mixture in a special hermetic container. In this case, you do not have to stir the solution, overflow it into a painting bath, because everything is already ready!

A special bucket in which the finished plaster is realized, has an oval shape and adapted to immerse the roller. An important advantage of using ready-made solutions is the lack of need for personal safety.

If, working with dry mixtures, it is necessary to apply the respirator and stitched glasses, in the case of the already ready-made plasters there is no such need.

Important: After use, structural roller, regardless of what material it is made, it is necessary to rinse thoroughly in running water and dry.

But what if there is no such tool? You can easily make rollers for decorative plaster with your own hands, but you can also apply a rigid brush and spend it in different directions. In addition, it can be used to make a surface of one or another texture, it is possible to use different remedies, up to a crumpled cellophane.

However, you can read about various techniques in the relevant articles on our portal.

Output

Now you know what is the instruction of the use of structural rollers, and what are the features of their choice. It remains to be purchased plastering mix and the corresponding tool and start work.

Simplify the completion of the task will help watch video in this article.

If you really want to create a stylish, unique interior, and there is not enough money on the classroom, you don't have enough money, you should not give up your idea.

Textural rollers for decorative plaster will allow you to implement it yourself without resorting to the help of specialists. But before running to the store behind this unusual tool, learn the information proposed in this article about its types and technology for creating a texture covering with it.

We all familiar with the usual painting rollers for painting walls and ceilings. And older people from their parents' stories remember wooden cylindrical devices for drawing a picture on the walls, which massively used in the era of the absence and deficit of wallpaper.

It was them that became a prototype of modern decorative rollers with a pattern for decorative plaster.

Offers of the construction market

Let's see what kinds of rollers for offer manufacturers construction tools. All of them are arranged in the same way and are a rotating cylinder, fixed on the handle.

Cylinder coating can be:

rubber;
plastic;
silicone;
porolone;
fabric;
leather
fur.

The texture of the future depends on the type of coating and its relief decorative surfacewhich can imitate brick or stone masonry, marble, wood, cloth or be decorated with original pattern, ornament.

Here are some examples:

Relief roller for stucco with hard rubber or plastic coating and a convex drawing on the surface of the wall in the surface of the wall;

Protruding the surface of the coverage, on the contrary, will allow you to squeeze the pattern in fresh plaster. For example, create an effect of brick masonry or tree bark;

Fur for texture plaster Used to create the effect of "fur coats";

Pulley tampon made of soft tissue fabric Mimics a marble surface that will look very believable with a competent selection of plaster and painting of walls (see) in a special way after drying it.

Homemade rollers

The price of finished ornamental rollers can be very different and depends on the material, size, drawing complexity. But in any case, it is not so high to save on this tool.

Nevertheless, among the experimental finishes, there are people among beginners who are just interested in making a paint structural roller with their own hands. This makes it possible to satisfy your creative needs and create a truly individual, unique design of the walls.

Make a decorative roller with your own hands in different ways:

Cut sharp knife Rubber roller ornament with smooth surface. For example, longitudinal and transverse channels that imitate brickwork;
Cut from thick rubber elements of the future pattern and glue them with special glue. Before that, do not forget to close the edges of the glued parts slightly so that they smoothly immersed in the solution;

Note. No matter how pattern or ornament you are chosen, it must be closed so that the compensation left is not interrupted.

Rubber stripes, laces, lining rope in an arbitrary order - in the form of a spiral or overchalters and intersections at a different angle;
An unusual roller for textured plaster is obtained when fixing with a scotch of a crumpled polyethylene package, vegetable mesh, burlap.

For reference. In addition to the relief rollers for plaster, you can use other tools and materials: stamps, comb, hard brushes, sponges, etc. Up to your own fingers that can be drawn on the fresh layer of plaster.

Methods of use

Make relief decorative roller You can differently. In any case, the walls before that should be well aligned, not to have depressions and bulges, otherwise prints turn out uneven. Therefore, to the base device for painting with structural roller, it is necessary to take carefully.

If a hard roller is used for decorative plaster, the process is happening like this:

A layer of working mixture is applied to the prepared even and primed surface;
She is given slightly to grab, because on a liquid solution it is impossible to leave a clear track - it will stick to the roller, clogged into the deepening of the relief. At the same time, it is impossible too slow, giving a solution to the hardness. Therefore, it is better to work together: one inflicts plaster, the second one gives it the texture;

For information. The settling time is usually 10-20 minutes depending on the type of plaster. Instructions on the package contains this information.

The roller slightly pressed against the wall under the ceiling and, without taking it off from the surface, lead down, trying to give it a very easy uniform pressure on it;
The next strip starts close to the previous one and from the same fragment of the drawing so that it is not interrupted. To do this, you can make a tag on roller.

If the resulting relief seems too rude to you, it can be smoke with a grinding grid in the water. Painting the walls can only be completely drying the plaster.

Using rollers with a soft coating, you can create a two-color relief stucco. For this wall, first equalize with a solution of one color, which will be background, and give them to dry. Then prepare the composition of another color and not very thick consistency, calorie its special casting pastes.

The application of decorative plaster roller is simply performed: it is immersed in the finished solution, it is filled first along the auxiliary surface for the uniform distribution of the mixture, and then along the wall. Movements should be smooth, with uniform pressure.

Conclusion

The video in this article will become an additional and more reliable help than the oral description if you decide to master the decorative roller plaster. After studying and several training approaches, you can fully professionally perform this work.

It will be necessary, but a whole roller from any material and any size. It is very important that the product handle is preserved. The remaining details can be easily found in any house.

With the help of a rope

For the manufacture of roller, you need to take a conventional clothes rope or any cord and wind it on the workpiece. The more often the cord will be checked, the denser will be the pattern. Can be used various methods winding, make intersection and so on. The result will be a relief pattern from the depression. Before using the homemade roller, it is recommended to check it on a small segment of a wall or a unnecessary sheet of plywood.

With the help of a knife

If a foam roller remains from finishing in an acceptable state, it can also be used. To do this, you need to take a stationery or acutely sharpened ordinary knife and cut stripes, squares or any other figures arbitrary size. The more they are, the larger the texture of the drawing. In the same way, the roller from the foam can be treated. If there is an unnecessary new product from the foam rubber, it is enough just to drag it to the thread so that wrinkles formed.

Using a polyethylene package

This is the easiest and minimum cost method of manufacturing textured products. You need to take an old roller and lock on it with a scotch meal package. The folds create a complex unique pattern from thin embossed strips. Instead of a package, you can use hair gum, fabric trimming, a grid for storing vegetables, dense paper.

Making a roller for decorative color using a polyethylene package

From rubber rolik

It is also possible to manufacture a textured roller for painting walls of rubber products. For this you need to take the usual rubber roller And with the help of copy paper, apply a specific pattern on it. Then this pattern must be cut into a knife. You can also use conventional rubber, but its thickness should be at least 5 mm. It is necessary to take care that the relief drawing on the product makes a single whole, while the lines must be wave-like. At the end of the rubber sheet with relief fixed on a cylindrical billet.

Fact roller easy to create using a conventional knife to which you need to cut the desired pattern on the rubber instrument

From foil

To make a factory roller yourself, you will need the following:

Dense foil. Finding such a foil is difficult for sale, but you can use fragments of packing of dairy or some other products.
Acrylic putty.
Crochet hook.

The manufacture of the roller in this case occurs according to the method of chasing. First of all, it is necessary to carefully clean the surface of the foil from the residues of food and fat. Then the picture should be applied on the foil, which is planned to be transferred to the ceiling or walls. Next, you need to take a hook for knitting or any other product similar shape and squeeze the relief drawings on the foil on the previously applied lines.

Important! During the chasing, it is necessary to observe a certain distance between the embossed lines. In order for the drawing subsequently turned out to be blurred, it is recommended to retreat with 5 mm.

It is necessary to apply an acrylic putty on the back of the product, and then press it to the surface of the roller. At this stage, it is important to give a cylindrical shape as quickly as possible until the putty has time to grab. Then you need to leave the workpiece drying (the frost time is indicated by the manufacturer on the material packaging). Last step - gluing foil to the roller on quick-drying glue.

From fine rubber and silicone glue

Before making a roller, you must prepare:

sheet of thin rubber;
silicone sealant and gun for applying it;
marker.

First you need to clean the rubber and carefully degrease the surface. Then the pattern should be marked or a pencil, which is planned to decorate walls or ceiling. Next, you need to charge the gun with a sealant and gently apply it on the markup. It is better to stop the choice on a simple pattern without subtle lines and weave. Perfectly suitable pattern in the form of waves, leaves or simple geometric figures.

With the help of sealant on the surface of the tool, you can create a convex pattern or impression, thanks to which the decorative effect is achieved on the wall.

To make a factory roller with your own hands, you can use any product on the surface of which there is a relief pattern. For example, buttons with great embossed, leaving artificial plants, various gypsum products. The selected item is lubricated with vegetable oil, applied to the rubber layer of silicone sealant, make an impression and leave to dry. It is possible to clean the product only after drying the sealant. Then the rubber sheet is glued on the roller.

Roller with scratch

The above describes the methods of making textured rollers that imply the use of old tools. But there is an opportunity to make it yourself from scratch. First of all, it is necessary to make a base - a cylindrical part. There are several options for blanks for the base:

Wooden rolling pin. This is the most suitable product. If the rod is equipped with a handle, it needs to be cut, leaving only a smooth cylinder. Then drill in the center through hole in which you need to insert a metallic rod or wire. You can use the handle from the old product.

Homemade tools From wooden rolling

Plastic tube. For these purposes, it will take a pipe with a diameter of 5 cm and 10 cm long. After trimming the workpiece, it is necessary to make plugs for the product ends, they are recommended to cut out of plastic. Then you should stick the plugs and cut into them the holes for the handle.

The manufacture of textured roller is a fairly simple process. It cannot be said that in this way you can save a lot of money, but one of a kind roller will help create a really original coating.