Projects of houses and baths. Projects of houses and baths Chopped bathhouse with attic 6x9

So far, the only B10 project in the 6x9 category has absorbed the advantages of a bathhouse and a residential wooden house. The project takes into account the comfortable use of a bathhouse by a large group of people. Everything in this bath house is large - from the bathroom to the loggia. Among the advantages of the building are a relaxation room and a vestibule, which can easily be converted into spacious kitchen. Construction of such a facility on suburban area solves three problems at once - housing, the need for a useful and pleasant pastime in the bathhouse and saving territory for development.

Construction technology

Possibility of use various technologies to implement the project, B10 provides the customer with a choice in the price range and compliance of the future construction with the intended use. Construction of inexpensive bath complex a large area is advantageous because design features project, even taking into account the maximum thickness of timber walls or the use of the most effective insulation in the frame version, do not lead to a dramatic increase in price. Since both technologies make it possible to build quickly, without spending resources on constructing a heavy foundation or using expensive and complex construction equipment.

Materials

Main building material when building a bathhouse from timber, there are profiled timber made from coniferous species. The profile allows you to build perfectly fitted walls without gaps. In the future, shrinkage processes will not become a draft problem for bathhouse owners, and the natural inter-crown seal is an additional guarantee of the tightness of the rows.
The high speed of construction is justified by the fact that, in addition to quality material The factory-made bathhouse will be assembled by professional teams of carpenters.

A frame version of a 6x9 meter bathhouse is made using atmospheric drying timber boards for racks, jibs and crossbars frame system. As insulation - materials tested and famous brands: Isover (Izover), Ursa (Ursa), Knauf (Knauf).
Inner space frame baths completely covered with wood, the walls are covered with well-dried softwood paneling.
The exception is the steam room where aspen is used. The floor is made of tongue-and-groove boards laid along joists.
For the exterior decoration of the bathhouse, the customer is offered a choice between wooden materials lining or timber simulator, or blockhouse, or siding with a base of OSB boards.

By prior agreement, in accordance with the analysis of the soil study, our company will provide the construction of a foundation most suitable for a bathhouse.

The cost of building a log bathhouse 6x9 without finishing under the roof is 531,000 rubles

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• External walls – profiled timber natural humidity section 145x90 mm (wall thickness – 90 mm) “block house” or straight profile.
• Total in the log house one-story baths– 16 crowns. There are 17 crowns in the log house of the baths with the attic.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
• The clear ceiling height of the first floor (from the floor joist to the floor beam) for one-story baths is 2.15 m (+/-50mm); for baths with an attic 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• The height of the roof at the ridge for one-story baths is 1.20 m.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables of one-story buildings, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• Installation of window and doorways with a dressing crown, without installing casing bars.
• Assembly of a house/bath on the customer's site.

The price of a 6x9 turnkey bathhouse with a foundation and stove is 765,000 rubles

• The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks per cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is processed protective composition.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is dry tongue and groove batten(spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Inter-crown insulation – jute fabric 6mm thick
• Inter-crown connection - on a metal dowel (construction nail 6x200mm, 250mm).
• Gusset- “half a tree.” The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
• The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
• The ceiling lining of the first floor (except for the steam room) is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
• In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm (ventilation gap – 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
• Installation of the ERMAK 12/ERMAK 16 furnace with a hanging tank (35 l stainless steel) for heating water.
• The base of the stove is brick in one row. Cutting the combustion portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, reflective screen made of smooth galvanized steel on basalt cardboard, flue sheet.
• The chimney is vertical, with an outlet into the roof through the ceiling. Starting tube - stainless steel. 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115*200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in a washing room shower tray 800*800 mm with siphon. The drainage outlet beyond the perimeter of the bathhouse is a plumbing PVC pipe with a diameter of 50 mm.
• The windows are wooden, double glazed, with sealing and fittings ( screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
• The entrance door is wooden, paneled, solid (spruce/pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. A padlock is installed on the front door.
• Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• In window and doorways casing bars (swarms) are installed.
• Sealing of corners, joints, abutments - spruce/pine A/aspen AB plinth.
• Finishing windows, doors - spruce/pine frame A on both sides, aspen AB
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bathhouse at the customer's site.
• BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

The whole country rests on such workers

Alexey Gennadievich!!! Due to lack of time, I couldn’t write to you - thanks a lot for the work of your employees on the construction of the bathhouse, two young men, unfortunately, I don’t know their last names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All our friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse we dreamed of.

The guys built us an amazing bathhouse

I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the time agreed upon earlier, the quality of materials and work was excellent top level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and general director Alexey Roslov for the work done. I ordered a bathhouse with a 6x6 attic, project B-20, with minor changes, “for shrinkage.” All work has been completed ahead of schedule and high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. Next year I will do the finishing with the same team. “Russian carpenters” win in all respects compared to others large companies. “Price-quality” is about them. Thank you very much again. I will recommend it to everyone.

Non-standard elongated baths 6 by 9 are relevant. Not needed complex designs. They are difficult to arrange. It's better to choose simple shapes- square, rectangle. This will save the amount of raw materials. And this is the most expensive item.

Profiled timber is made from softwood:

• pine;
• cedar;
• larch;

Pine trees account for 80% of all construction of steam rooms in Russia. It holds heat well, does not rot and has reliable properties. Such a structure will stand for more than 50 years without overhaul, and having updated the façade after fifty years, so much more. We work turnkey and provide a guarantee. Our wooden buildings stand for centuries.

We produce two types of wood on the street side - flat and semi-oval. You can choose based on your preferences. The differences are exclusively external. Designs of 6x9 bath houses can be adjusted, but you should not combine these decorated surfaces in one version.

We do not work with glued materials. Dry only scaffolding becomes the basis for future buildings.

What type of profile is found for a bathhouse made of 6x9 timber?

We carry out three standard models:

• Finnish, where there are 2 side teeth and a platform where the insulation is supposed to be laid.
• a comb with more than three or four teeth, which ensures 100% tightness.
• Scandinavian, which incorporates both previous ones.

Our craftsmen work with useful layouts. They offer functional space. Look at the photos in the gallery. Not everything is represented there. Collection in the office. If you need to choose, come and we will show you our arsenal. Complex and simple, irregular configurations and with attics - our carpenters and designers will carry out the design project you choose. We will inform you of prices after full calculation.

Spacious log bathhouse (guest house) made of logs 6 by 9 meters. The internal walls divide the log house into a steam room with a shower room, a living room with a kitchen, a boiler room and a dressing room. See 3D models and layout for more details.

Technical characteristics of the project

• purpose - bathhouse or guest house
• external building size 6 by 9 meters
• the dimensions of the log house along the axes are 5.3 m by 8.3 m.
• effective area
• type of log house - six-wall, manual felling
• cutting type - bowl with lock
• wood type - pine
• average log diameter 26 - 27 cm
• height - 12 crowns
• roof - hip

Project cost and construction options

Let's look at the main stages of building a 6x9 bathhouse and the cost of each stage.

1. Log cutting
2. Construction of the foundation
3. Installation of log house and roof installation
4. Installation of windows and front door
5. Finishing and insulation

Log cutting - 445,200 rubles

The cost of manufacturing a log house (well) at a felling site in the village of Shuvoe, Moscow Region, is indicated.

• log diameter 26-27 cm.
• log house from winter forest(Arhangelsk region)
• calibrated log of normal running quality
• processing of logs - hand-planed with an electric planer
• cutting into a reverse “bowl with a lock”

Construction of the foundation - 207,000 rubles

The cost of constructing a shallow reinforced strip foundation is indicated. The total height of the foundation is 1 m (40 cm in the ground, 60 cm in the base, 40 cm in the width).

Not included in the price: delivery of sand and concrete to the construction site.

Installation of a log house “under the roof” - 383,000 rubles

The finished log house is marked, disassembled, loaded onto a vehicle and transported to the installation site. Installation is carried out on wooden dowels, inter-crown insulation - jute. The price “under the roof” includes:

• dismantling of the log house at the cutting site and loading
• unloading at the site and assembling the frame
• impregnation lower crown antiseptic
• jute tape (inter-crown insulation)
• birch dowels
• logs / beams - 150*200 mm timber
• bottom trim - 150x150 mm timber
• top trim - 150x150 mm timber
• rafter system (rafters, sheathing, waterproofing)
• subfloor
• crossbar
• lining
• Povetka
• fastener

Not included in the price: caulking, sanding.

Metal roofing - 137,000 rubles

The classic metal tile Atlas classic 0.5 (chocolate color) was chosen as the roof for the Badgers project. Snow guards were also installed, drainage system and ridge aeration.

Installation of windows and doors - 360,300 rubles

Finishing the log house begins with cutting openings, installing the front door and windows. There are 6 in the project window openings and 3 door. The price includes casing installation, plastic windows, metal entrance door, wooden platbands inside and outside.

• production and installation of casing of openings (composite-adhesive made of pine wood, 90x300 mm)
• Veka Softline windows, profile 70 mm
• metal-plastic Veka doors entrance series, profile 58 mm
• entrance steel door
• wooden trims 30x150 and 30x200 mm.

Finishing and insulation - from 200,000 rubles

• vapor barrier of floor and ceiling
• insulation of floor and ceiling 10 cm
• finished floor made of tongue-and-groove floorboards 35 mm thick.
• ceiling trim with clapboard (pine + linden in the steam room)
• stove installation
• canopy making

Note! Prices for a specific implementation of the Badgers project are indicated. At your request we can change wall material, for example, build a bathhouse from timber or a gun carriage. Or change location interior walls, roof type, add a veranda or attic. Install other windows, doors and finish. Contact us or leave your coordinates.