Folding baby cot with their own hands. Furniture - transformer do it yourself: photos, drawings, design options. Children's bed transformer do it yourself

For parents, it is important that their children grow in comfortable atmosphereAnd they did not threaten their sleep. If a person has a minimum set of tools and elementary knowledge, then baby bed do it yourself will make it completely easy, provided that there is Photo, sketch of the product, blueprints. The device of such furniture is simple.

Scheme and sizes of a crib for a newborn

Parents know that the baby for the baby especially at the age of the age of four is especially important, because the child sleeps a lot. Proper furniture is a pledge of a comfortable sleep. For apartments small size Such a cot in a nursery can replace the playpen.
It is easy to do in two to three days and provide all the subtleties and nuances for the comfort of the child.

Proper furniture is a pledge of a comfortable sleep.

First of all, it is necessary to deal with what elements this design will consist.

Mattress. It is chosen on the basis of the weight and age of the baby, because it is better not to do it with her own hands, but just purchased in the store. The purchased mattress was developed in conjunction with orthopedists and takes into account all the needs of the body for a comfortable sleep and the correct formation of a children's spine. Mattresses are divided into two main types: on spring block And without springs. A variety of springs can be on an independent spring block (each spring is placed in a separate bag of nonwoven material and the load on such a mattress is distributed point) and on the dependent spring block (the springs are combined with a metal frame, and the weight of the sleeping is distributed evenly on the entire area of \u200b\u200bthe product).
Comfortable pendant cot

Such mattresses are best acquired for children from 5 years. And the toddles with a slight weight are recommended products on a blackboard, where the frame itself, as a rule, consists of a PPU or a foam rubber and can depend on the degree of rigidity supplemented with coconut coirs or other materials.
Frame. This element is done on the basis of the size that is supplied to the mattress of the bed. The material for it most often serves a stranded board.
Lamel. These parts of the product are designed to support the mattress from below and represent the planks inserted into the frame of the furniture. They form a lattice with a distance between each other about 5 cm (for the mattress ventilation).
Making a baby cot with their own hands master class with drawings and photos
Sidewalls. They are a fence so that the child does not fall from the crib. Depending on the parent's desires, they can be high or low, solid or carved. Forwards (product backs). On the head of their height will be higher than in the legs.
Drawings and photos of a crib for a master class
Legs. This element can be made with your own hands or purchase in a specialized store. furniture fittings. They can be initially strung on the sidewalls, and they can be screwed to it.

Crib drawing

We are determined with the model

In the children's room most often use several varieties of beds:

With boxes
Loft bed
Bunk bed (if there are two kids in the room)

If the premises of the children's room does not allow to put in the room large bed, and a compact model is needed to save square metersIt is better to choose a design with drawers. Boxes are used for storage bed linen, toys, children's things and everything that does not fit in the dresser or baby's couches.

Baby cot in two levels for young children

In order for the furniture to be high-quality, it is necessary to choose environmentally friendly materials for its manufacture. Perfect Material There will be a thick plywood or tree. Popular in the furniture industry MDF or chipboard to acquire for the manufacture of the design is not due to the adhesives used in the manufacture of materials. Chemicals can adversely affect the kid's body, causing allergies.

Original bed for stylish interior Children's room

Tip: It is not recommended to make a crib size less than 1.5 * 0.6 meters, but it is not worth doing it huge more than 1.8 * 0.7 meters. From a small bed, the child will grow rapidly, and if you make it too big, then the baby will not feel comfortable in it.

The base for such furniture is made solid, it can be purchased ready for it, and you can simply use the plywood sheet instead.
Dimensions should be repelled from the size of the acquired mattress. As a base, a lattice can be purchased, but as an option can be used by plywood, as the children's weight is not so big.

The perfect material will be fat plywood or tree.

Wood shield. It is better to use low resin wood, such as birch, linden. The shield size is recommended to take two meters long, 60 centimeters width and a thickness of about 3 centimeters.

On the furniture shield chalk, the future contour of the workpiece in size sketch is drawn. If onboard the design it is necessary to make holes, then they are drawn, attaching a glass for champagne or using an ordinary glass.

Furniture shield and Faneur can be cut by buying in the store. As a rule, in most stores such services have, but it is necessary to provide dimensions in millimeters and patterns. With its own, it is recommended to make it possible to make an electric bike, but if there is no jigsaw on hand, you can cut the materials of the usual saw.

Furniture shield and Faneur can be cut by buying in the store.

After cutting all the elements from the tree, shine with emery paperSo that the materials from which the bed are made did not scratch the gentle skin of the baby.

If you failed to find corners from aluminum, they are cut from aluminum profile. Details of the bed must match the drawings of the sketch. And the length of the corner from the profile must coincide with the long side of the furniture. On these fasteners, holes are made to invent self-sustains. The sidewalls are attached to the beds to the bed lattice or plywood base, and this design is tightened with eight self-assembly.

Original children's bed in the form of a car for a boy

Initially, the parts are fixed on the one hand, then the future blank turn over the side. According to the scheme, it follows from time to time to check the order of fastening of the elements and the location of the parts. In order for the product to be stable and strong, follow the skewers and displacements of parts relative to each other. The bed walls are attached to each other and are tightened if there are no holes in the walls, then they are made using drill.

The framework of the product is ready, it is time to collect a back, which will be located above your baby's head. If you wish, it can be made of any form, the main thing is that this detail of the furniture fully performs its function, that is, protects the baby from injuries.

Carved Wooden Cot for Newborn Baby

Very often small children in a dream raise their head up, so the board here should be at least 10 centimeters in height. Another advantage of high onboard and headboard is to prevent throwing toys and bedding from bed.

Original Baby Cot for Boy

We make a headboard: take a furniture shield, from it, if you wish, you can make a carved back, looking beautiful and noble or decorating. The design of the head and the back in the legs should coincide that the design looks organically.

We make a headboard: take a furniture shield, from it, if you wish, you can make a carved back, looking beautiful and noble or decorating.

We screw the legs to the largest bed, which are purchased in the store furniture accessories. We do it with the help of high-length screws.

All elements of the bed body are additionally polished carefully, up to the slots and cuts, so that the child puts his fingers into the slot.

Tip: Smooth sandwicked surface will be used with a drill with a nozzle or grinding machine.

Decorated polished backs are attacked with a frame frame. To the fasteners not visible, they are drilled from below, directing the drill. The cutting of the holes should be as neat as possible, because this item is easy to damage. We make a hole under the screed yourself, the drill in this place will be difficult to do it. If the wood for making a bed is soft, then the hole is easy to break.

So that the fasteners are not visible to be drilled from the bottom, directing the drill

The bed configuration assumes that storage boxes are not attached to the frame of the bed, but have a type of roll-out tumb. Drawers should be supplemented with wheels so that the storage capacity for storage has rolled out.

Stylish Wood Cot for Baby

If the owner of the apartment decided to change the configuration of the crib so that the boxes are put forward, then the bottom rack is attached to the bottom of the workpiece, and the product itself will stand on the side planks. In this case, the sidewalls are made higher than intended earlier by several centimeters, equal to the height of the boxes. The retractable box itself (drawer) is placed on the guides.

Wooden crib for bright and spacious room

For the boxes, we take a plywood with a thickness of 1.2 cm, cut down the bottom and walls of the box, tighten with a self-drawing. Additionally, the box is glued, because things in the box are loaded on the design. Attach wheels at the bottom of the collected box.

Light spacious room with a crib

Legs on the bed, if it is decided to make them yourself crawled out of residues furniture Shield Or from cropping a square of a square shape. Fasten the legs to the frame of furniture with self-draws.

For the boxes, we take a plywood with a thickness of 1.2 cm, cut down the bottom and walls of the box, tighten with a self-drawing.

Decorating the bed

When the works are completed, it is recommended to give the product a finished look. It is recommended to go upholstery cloth For furniture. Pre-from the fabric cut the parts by 2-3 centimeters more of the main parts and pass overlock so that they do not appear. Fabric attached furniture staplerAnd its sections are hiding inside the cot, so as not to spoil the aesthetic type of construction. During decoration, the fabric is stretched so that the races, folds and bubbles do not appear.

Crib for the smallest family member and small bedroom

Another finishing option will be lacquering a skeleton of a crib, headboard, backs in the legs. To do this, it is recommended to use quick-drying varnishes on water based. More environmentally friendly for furniture in the children's room will be machining a verse. Previously all the details are recommended to sand and polish the drill with the nozzle.

For decorative type their facades make bright mDF panels or LDPs blue, pink, light yellow, lilac and other colors.

Bunk bed do it yourself

Baby cot with a transformation mode will conquer parents stylish design, Multifunctionality and practicality. Properly constructed cradle will ensure a sense of security and comfort, improving the quality of the newborn baby's sleep.

Round Bed Transformer For Newborn Children - Benefits and Features

Multicomponent round bed Transformer will be an excellent addition for classic and modern interior Children's room. Babies spend in the cradle most of the time, so the furniture is required to be spacious and safe for kids aged from 0 to 3 years.

Cot with a transformation mode is a combination of several items that are actively used when careing the baby. The design can be transformed into a playpen, a sofa, a changing table and even a full-fledged bed for children aged 3 to 6 years.

Advantages and features of a circular crib:

Compactness. The design consists of a variety of components that occupy the place of the usual cradle. In the elite models of furniture mounted boxes for storing clothes and toys of a child.
Simplicity of transformation. Parents can independently assemble and convert the cradle into a full-fledged bed, a playpen, or a convenient table for swaddling.
Excellent review. Parents can watch the child from any corner of the room.
Elegant I. original design. The bed will fit perfectly in the design of a nursery.
Safety. Designers of children's furniture try to smooth the sharp corners that can harm the child starting to crawl or turn over. The frame is made from the safe baby of natural materials.

The service life of a cot is an average of 10 years. Worn structural elements can be replaced, thereby conducting an update or modification of furniture. Many models are equipped with cavalry, swing mechanisms and wheels for moving a crib.

In the interior, a children's round bed will attract attention, so it should be carefully examined by her package. Transformation occurs in a matter of minutes. You can adjust the height of the base of the bed, by converting a cot in a full-fledged playpen or a changing table. Some models are expanding in diameter and are divided into two chairs.

The transformer is more expensive than a regular bed for a newborn. The price depends on the configuration and number of functions. If you summarize the cost of buying structural elements of such furniture separately, the purchase of a bed with a transformation mode will be a profitable investment.

Complete set - from which elements the bed transformer circles

To select a suitable bed, along with the design of structural elements, it is necessary to take into account the parameters of materials for the manufacture and decorative components. We must not forget about the preferences of the child, especially if the furniture is designed for long-term operation.

The crib must first be safe, so it includes structural elements that are required to meet individual needs of the child. Be sure to take into account the width between the rods, which should not exceed 6 cm.

Types of bed frame:

One-piece arcs connected by a single semicircle.
Quantity Circle, bonded among themselves.

The first option is stronger and more reliable. This design is characterized by simplicity of assembly and transformation. The framework is strengthened using a connecting strip (Tsarga), which is placed at the bottom of the semi-cylinders. The child can compete, move and even jump inside, the frame with ease will withstand such loads.

Additional structural elements:

Wheels with retainers will allow moving the bed.
The pendulum mechanism is designed for the child's son.
The box under the crib is used as a place for storing children's things.
Lining on silicone sides, plastic or natural fabric will protect the child from injuries.
The bottom height control system is intended to change the base of the bed.
Removable partition will make the crib to bedroom Parents.

A high-quality round bed for newborns is distinguished by a solid and stable design in which each part performs a specific function. Additionally establishes a multi-stage base control system, wheels and an extension to convert the cradle into a full-fledged oval crib.

Feedback options:

3 in 1 consists of a cradle, a table for swaddling and a player. Transformed by moving the base of the bed along the fixed side walls. Suitable for children up to 1 year.
5 in 1 is transformed into an oval bed. Design can be turned into comfortable sofaBy removing one of the side walls. Furniture will suit the baby aged 23 years.
6 in 1 turns into a changing table, a sofa, a gaming zone and a large baby bed preschool age. This furniture can be converted into a table with two chairs.
8 in 1 has a built-in pendulum system for tendering children.

Standard sizes Cakes make up about 90 cm in diameter for a round cradle and 125x75 cm for an oval bed. Some models involve the possibility of expanding the bed to 160x90 cm. The height of the side is regulated by parents.

Materials for the manufacture of children's furniture should be natural and environmentally friendly. Manufacturers use an array of birch or a beech of the highest grade. Additionally, the frame is covered by hypoallergenic paint and varnish materials and strengthened with metal fasteners.

What transformation options has a round crib

IN round bed No angles that can cause injuries. The child here feels protected, as if in the maternal womb. Manufacturers complete with a bed send an instruction that allows parents to independently select the optimal furniture conversion mode.

Popular options for transformation of the bed 6 in 1:

Lucker for a newborn round shape with a lower base for a bed. Moving the bottom to the upper position, you can get a full-fledged changing table. This bed option is designed for kids aged 0 to 6 months. The size of the bed is from 70 to 100 cm in diameter. Above the cradle can be installed canopy.
Spacious oval children's bed for kids under the age of 3 years. Due to additional details Sleeping place can be expanded to 120 cm long. The width depends on the diameter of the cradle, that is, ranges from 70 to 90 cm. The height of the bed is adjustable, and the fences are removed if necessary.
Spacious playpen can be obtained by moving the base of the bedside place in the lower position. The bed becomes safe game space.
Children's sofa, which turns the design after dismantling one of the lateral fences, will allow the child to relax during the day. The width of the seat depends on the size of the bed (120-160 cm). For additional convenience, the back is recommended to watch multiple pillows.
Two chairs and a table are formed by disconnecting the central crossbar and side parts. Each highchair is 70-90 cm wide and a depth of 35-45 cm is able to withstand the weight up to 90 kg.
Oval bed for children from 3 to 9 years old can be obtained by expanding the central crossbar. The width of the bed remains the same, and the length can reach 140-165 cm.

The base is surrounded by sidelights from all sides that protect the child from falling out of bed. During installation and folding, a small set of tools for tightening and unscrewing bolts may need.

What mattresses are equipped with round crib transformers

Included with the bed can be supplied at once three mattresses, which are equipped with a cradle, standard and large oval bed transformer. For kids, mattresses with filler from coconut cell and latex foam are suitable. They perfectly support the baby's body. Covers are better to buy removable, as the baby often gets a sleeping place. In the process of buying bedding, with natural tissues should be preferred. Better decision It will be the acquisition of cotton cover, but a web can be used as a replacement with high-quality wool.

The mattress differs not only by environmental purity, but also stunning orthopedic properties. The base with the ventilation holes provides optimal air circulation in the area of \u200b\u200bthe bed. During the use of the bed as a table, a player or chairs, the mattress is removed.

What additionally equip round models of children's beds of transformers

Advanced oval bed for newborns is equipped decorative elements, including soft sabers and pillows. In advanced furniture models, the canopy is additionally installed and the indication system. Canopy over the bed allows you to protect the baby from drafts, sun ray and dust. Included with children's furniture uses a canopy in the form of a "crown" design, covering a translucent cradle or partially closing the sleeping place of a regular bed.

The pendulum mechanism is adapted for convenient child damp. The transverse pendulum shakes the bed from the side to the side, while the longitudinal mechanism moves a sleeping place towards the head of the head of the graduation. The second option is preferable. The cradle due to its rounded form supports both mechanisms.

[Email Protected]website
P.S. We do not sell furniture, we only help you familiarize yourself with what happens and navigate in the choice.

Today there are a huge variety of furniture species for every taste that can satisfy the requirements of even the most demanding client. IN lately The market has firmly taken a transformer bed with a folding mechanism.

What is a bed with a folding mechanism?

As a rule, such a bed can be located in the closet, which allows you to significantly save the room space. Especially such a design is relevant for small spaces.

The mechanism for the bed folding allows you to combine a bed with any modular furniture.

The feature of the bed is such that it can be hidden into furniture, and if necessary, push back. Thus, it seems that there are no beds in the room at all.

Types of transformer beds

Vertical model

The folding bed is located in a niche in the wall, it can be masked with photo wallpapers for your taste.

Horizontal model

It is established in such a way that one side of the bed is located near the wall. Location Along the wall promotes easier opening and relevant for children's rooms.

What is the bed with a folding mechanism?

Mattress

This can accommodate any kind of mattress, but still it is preferable to choose orthopedic.

Lifting mechanism for cut bed

If the mechanisms for raising / lowering the bed possess good qualityThe design will almost automatically take the starting position.

Such mechanisms can be three types:

mechanical;
on springs;
on gas springs.

Such a bed can be an excellent addition to the interior, but it is still not everywhere to buy a similar design. How to be in this case? The folding bed is completely easy to do. In this way, you can save a significant amount of money, because everything that is created with your own hands is not only cheaper, while you can take into account all personal wishes and assemble the design according to individual developments.

The mechanism for the folding bed do it yourself

To work, you will need a bed and a framework. And, of course, the mechanism itself is a folding bed.

We start working from the frame. You can choose the form of the cabinet details or any other furniture item in the room. The wall to which the bed will be attached must be concrete, otherwise it may not withstand the severity of the design.

The frame consists of a plinth and shelves for stop. IN back wall There is no need for such. It is logical to use chipboard as a material.

I fix the frame to the wall, based on the axis of the turning of the bed and the upper horizontal. The thickness of the vertical walls should be 2.5 cm, horizontal - 1.5-2.5 cm.

Details are connected by self-pressing at a distance of 25 cm from each other.

The size of the frame can be any, it all depends on the size of the person for which the bed is created, from the mattress and free space. As it, by the way, you can use the frame from old bed, It will save materials, time and money.

We make beds. To do this, you will need to get two side boards, two backs and headboard. Duravel belts are used to fix the mattress.

The easiest way to buy a mechanism for a folding factory-made bed is preferable from - this will simply fix the design in any desired position.

Observing all the rules for mounting the design, you will become a happy winner of a transformer bed that will not only save the place in your room, but also help make the interior unique.

In the world modern technologies, when in small square Apartments I want to put everything purchased, transformers begin with popularity. Consider how to make a transformer bed in step by step lesson do it yourself.

Mastery unusual transformer bed do it yourself: types of beds

The transformer bed is an excellent solution when you need to combine several interior items in one design. Especially popular this model In small apartments. There are several basic bed transformation options: wardrobe, desk, chest, sofa.

Each chooses that model that fully satisfies its requirements. The principle of operation of the bed is based on the likeness of the sofa mechanism: with the help of special fasteners, fixation is possible in a certain position.

Bed cabinet.

The most common model is the cabinet bed. Depending on the position of the bed in folded form, two types of this furniture can be distinguished: horizontal and vertical.

The closet of this design can be a real either imitation. Main components of this type of bed: box, sleeping place, which can be single and double, lifting mechanism.

Bed-cabinet can be made and do it yourself, if there is required Material and tools.

Before starting work, you should make sure that full list required toolswhich will be scored sufficient number: Level, square, jigsaw (desirable electric) with a saw on wood, screwdriver, roulette and pencil, electric drill with sweepers, perforator and pliers.

The first thing that will be in demand at the beginning of work is the drawings. They are performed independently, adhering to certain principles:

Carefully thought out the type of transformation. The sketch displays furniture in general and set overall dimensions
According to the created sketch, a common drawing is made, in which all the details are displayed.
Each item is considered and draws separately with the indication of all sizes. When performing this item, the width of the material used should be taken into account
Carefully calculated the locations of the joints of the parts, and it is necessary to take into account the thickness PVC ribbons For eddy pasting
All design details must be more than 5cm

Build bed.

The most first step in the manufacture of the transformer will be the acquisition or manufacture own forces Basis. Before you start performing work, you need to buy a mattress that tasks the size of the bed. For the manufacture of the base with your own hands, the presence of a slab will be required. laminated chipboard. The required parts are cut out of it. In the vertical bed, the base is the facade of the cabinet, so it can be made from fragments that differ in texture and color.

Chipboard cut at home is not recommended, so it is better to contact specialized enterprises. If you still have to lifting some details, then in order to avoid chipping, you need to use the electrolovka at maximum turns.

You should buy shock-absorbing bent special plates that are called "Lamanes", with them bundled and the frame of the corresponding size. All this is going together and installed on the bars.

Then a sleeping place is going with a screwdriver and confirmation that is hidden under a plastic plug. Corners should be used by iron, which give a guarantee of durability and strength. The side walls of the sleeping place attacks the 4cm x 4 cm, which is a support for the design of the lamellae.

The next action will be the fastening of mattresses and clashes that will not allow the beds spontaneously open.

Fastening to the wall.

The wall to which the design will be attached must be durable. After that, you can collect a box that, if desired, can be equipped with additional shelves. Then give preference to one of the species lifting mechanism: Purchased, from garage curtains or with electric drive. The hinge is attached to the bedroom and box, after which it is followed by checking the lifting mechanism, the function of which is a light lifting bed and fixing it in one position.

There will also need shock absorbers and a system of counterweights that should be carefully chosen. The base of the cabinet is attached to the wall, the bed rises, and the facade is made up at this time with various fittings and elements. You can safely use the element of the interior made by your own hands. Photo clearly demonstrates one of the options for decor of a wardrobe bed:

By the same principle, the process of manufacturing a bed table and other variations occurs. It differs from the adult bed transformer baby bed transformer, because it is not built-in. On the contrary, all elements are embedded in its design.
Video selection on the subject of the article

In conclusion, we want to offer you to get acquainted with the video that have been selected on the subject of this article. They can find out some subtleties of the process of manufacturing furniture of transformers, as well as inspired by ideas.