Despite the large selection of finished furniture, many people spend a lot of time and forces in search of a suitable closet or bed. Through the "sieve doubt", a variety of models, differing from each other with a constructive, color and sizes, but nothing is suitable. It is with such a problem that the user has encountered the user of our site with Nick avamonster,and the homemade bed became an excellent way out of the "furniture deadlock." In this article we make a bed along with our user!

Overview of lifting bed models.
- What instruments and materials are needed to make a bed.
- Operating procedure.

Bed "Make yourself"

avamonster. User forumhouse.

I need a transforming bed into my house, which can be quickly and easily removed into the wardrobe. As folded form, the facial part of this bed should be completely identical to the "facade" of the ordinary cabinet. Therefore, outside there should be no discovering handles sticking legs, etc. Such a bed should not take a lot of space. In the unfolded form, the Transformer should turn into a full-featured bed intended for a comfortable sleep, and not a guest "bed".

Wheeling the Internet, revising dozens and sketches of beds and throwing several furniture stores, the forumchanin could not find a model that would fully satisfy his needs. Namely:

• We need a transformer under the standard size of the mattress of 1600x2000x150 mm, like a normal sofa; the height of the decomposed bed should not exceed 45-55 cm;
• The width of the transformer bed is: the width of the mattress (1600 mm) plus the thickness of the side walls of the cabinet made from the chipboard. Those., Approximately 1632 mm. The depth of the bed is equal to the depth of the cabinet - 450 mm. In the unfolded state, the bed length should not exceed 2100-2200 mm;
• In the open position, the folding bed should fit well into the interior of the apartment, and not look like the simplest analog of "clamshells". Should easily and quickly clean;
• The unfolded bed should not occupy a lot of space in the house and impede the free movement of the room, opening adjacent cabinets, lockers, drawers, etc.;
• Safety: the bed should not have sharp corners, about which you can hit the foot, hidden cavities and cracks where pets or small children can climb. Gazlift or springs of the opening mechanism should not be located near the sleeping head;
• "Humanny" price tag.

We present a selection of photos of those folding beds, which reviewed the forumchanin, and also give it comments, why it did not come up with a one or another model.

A quick glance at this picture is enough to understand that this is not a simple cabinet, but a wardrobe in which it managed to embed a "clamshell". It would be better not to be built - the gap is visible from below, and the handles are very uncomfortable.

This lifting model in the folded condition is no different from the ordinary cabinet, but it is worth unfastening it, and the bed covers access to the cabinets and drawers. So she must constantly clean and go down, which is very uncomfortable.

The option of the bed-cabinet with sliding doors. This model and place does not occupy a lot, and in the folded state is indistinguishable from the standard cabinet. The main inconvenience is the breaking depth of the Transformer - 80 cm. To sleep will have to sleep, almost lying head and shoulders in the closet. It will not like it to everyone. So this "guest" option also disappeared.

Typical model that can be often seen in stores. Avamonster - and she did not suit that, instead of a springs or a gas lift, the bed was removed using a counterweight. When it leans, it can be seen that the bottoms are similar to the legs from the "clamshells". And the price exceeds 40 thousand rubles.

Another common option. The main claims of AVAMONSTER-A to this folding bed: from above, like the "mustache", stick the legs, and in the open form, the mattress lies inside the bed frame. Passing next to such a bed, you can accidentally touch the foot about its sharp angle. The block with springs is hanging next to his head, and on the "tram" handles can be immediately determined that this is not an ordinary cabinet, but "transformer".

avamonster. User forumhouse.

All models that I have seen in the store had a constructive: "The box, shot down from chipboard or plywood, which is simply attached to the mattress." It did not suit me. I was brought to the United States, there I saw another constructive: the frame is "inside" the base under the mattress, and the mattress itself is a little more widely foundation. Springs or gas lift are under the mattress, and not stick out opposite the face. It seems to me that this option is safer and convenient to operate.

There is also an option with a triple-caterpillar, but such "transformers" of the road and do not often come across on the eyes.

The search for the finished folding bedroom was not crowned with success, but the negative result is also the result. As a result of His Nataris, Avamonster finally decided on the list of requirements for the product and therefore decided to collect the bed itself.

Interesting is still this option "two in one", but this project "Make your own two bed bed" is much more difficult for realization at home.

Material required for assembling bed-transformer

Looking forward, let's say that the forumchanin managed to collect a double bed, no different and even superior industrial or custom-made samples. The width of the "transformer" is 1640 mm, the length in the decomposed state is 2130 mm, the height is 500 mm.

According to Avamonster, to achieve the success of the project and do everything as needed by the first time, without numerous alterations and changes, Sketchup helped him. Having spent on learning the program with "0" three months, sitting on drawings and sizes, the forumchanic sketched the virtual models of the crib and the diagrams of its nodes that can be twisted on the monitor screen (see pictures).

A similar approach made it possible to avoid multiple errors. After all, many novice masters often forget the main construction saying: "Some seven times, one time a down." An attempt to immediately embody "in metal", without plans, drawings and competent calculation of several options, leads to a damage of the material due to the constant changes in the design of the product.

Bed "DIY" is made from simple materials and does not require special tools for its manufacture.

What is needed for the manufacture of the product

• Chipboard sheets - 1580x995x16 mm. I saw into the size, and the edges of the ends of the slabs was made on the side. It took 12 thousand rubles;

• Made to order springs for the lifting mechanism. Those. Spring parameters: bar diameter - 4 mm, outer diameter - 36 mm, number of turns - 30. The length of the spring with hooks is 18 cm. The course of stretching is 21 cm. The accompanying force -55 kg. Spring parameters that depend on the "shoulder" of the lever and the total weight of the bed, the forumchanin calculated in a special calculator. A set of 5 parts bypass Avamonster at 3.5 thousand rubles;

• The framework of the bed "Make myself" is a profile tube with dimensions of 4x2 cm. The wall thickness of the frame tube is 2 mm. A total of 18 meters of such a pipe were purchased. The pipe was painted in size on the elements on the spot so that it was possible to take it to the house on the usual "car". It took another 1.5 thousand rubles;

avamonster.

Because I have no welding machine, I had to drill holes in the pipes under the fastening bolts. This greatly complicated the task of assembling a bed-cabinet. The best option is to cook everything yourself or pay to the order to order, and so I also had to clean pipes from rust. The surface of all visible metal parts of the pipes, I saved the film under the wood.

• Hardware. The bed "Make himself" was going to bolts, nuts and screws. The plane frame for strength and rigidity was twisted towards the corners under the M6 \u200b\u200bbolts. All bolted compounds also calculated the load on the slice. Forumchanin's essential fasteners have spent 4 thousand rubles.

How to collect a transforming bed yourself: the main stages

The base under the mattress (sheets of chipboard) was screwed to the homemade frame with special leakage self-drawers. Such self-tapping screws have at the end of the "drill": chipboard should be held in a large diameter, steel is smaller, and already on the finish line in the tree is a deepening under the head of the self-press. Thus, in one reception, the chipboard is attracted to a metal frame without its pre-severity.

The design of the frame is designed so that the soft mattress is the widest part of the crib. In this case, it is impossible to hit the foot on the solid protruding edge of the frame.

Despite a wide range of furniture items in stores, people still prefer to independently manufacturing beds.

After all, so you can choose the type of design, manufacturing materials, design and size of the sleeping bed. In addition, making furniture with your own hands - very pleasant and useful. You yourself will create a comfortable place to sleep from safe and environmentally friendly materials.

There are different models of beds. But most of the owners of small-sized apartments give preference to models with lifting mechanisms. Their advantages include:

• saving free space;
• original and aesthetic appearance;
• the presence of an additional place under the mattress for personal accessories.

Materials

Before proceeding to the manufacture of beds with a lifting mechanism, it is worth competently select consumables. Make furniture from the following materials:

Council: In addition to sawn timber, in the manufacture of beds with a lifting mechanism, it is worth paying attention to the accessories, the guide and the lifting mechanism itself. It is from him that the durability and strength of the product will be directly dependent. It is better not to save on the purchase of furniture components on the purchase of furniture components, but to acquire products from proven and well-proven manufacturers.

Types of mechanisms

The lifting mechanism itself happens:

In which option to stop the choice, people should be repelled from personal preferences and financial opportunities.

Council: If you want to make a practical and durable bed, prefer the mechanism on gas shock absorbers. If you are going to make an economy option, for example, for installation, you can choose a simple mechanical mechanism.

Drawing

After selecting the model of the bed, its size, manufacturing materials and type of lifting mechanism, it is worth making a drawing on the preliminary sketch of the product. Thanks to its presence, it will be easier for you not only to make detailing individual items, but also to collect a non-compensated design.. Drawing options There are several:

• you can make it on your own if you know how to draw;
• you can use special computer programs downloaded from the Internet;
• you can contact the furniture company, where in addition to the competent drawing, you will be offered to make the detailing of all individual items.

Instruments

For the manufacture of beds with the lifting mechanism you will need the following instruments:

Of materials You will need:

• lumber (the easiest way to make a product from LDSP, OSP, MDF);
• upholstery materials;
• foam;
• self-tapping screw;
• fasteners;
• lifting mechanism.

How to make yourself?

Manufacture and assembly

We proceed to the workflow:

Installation

The mechanism itself is sold ready for installation. First you need to fix it on the base frame of the base, then attach to the lateral part.

Council: The mechanism will hold better if you welcome it to the metal frame. It can also collect the rest of the bed.

Finish treatment

As for the finishing processing, there are several options here:

Photo

Such furniture is both functional and attractive:

Useful video

All stages of assembly can be viewed on the following video:

Conclusion

In conclusion, it is worth noting that to make a high-quality and practical bed with a lifting mechanism with your own hands. The manufacturing process will take a long time, given that you will independently develop the product design, pick up the lifting mechanism, manufacturing materials, draw a sketch.

As practice shows, people leave for about a month on an independent assembly of beds with a lifting mechanism. But as a result of your efforts, you will have a durable, practical and comfortable bed that meets your personal needs, the general interior of the premises and features of the bedroom.

In contact with

Logging beds that can be installed in a vertical position after sleep, freeing the space of the room, enjoy tremendous popularity. And models of such beds can be a huge set. In this review, the best of them are collected, and with a certain skill, such a bed can be done with your own hands.

1. Lifting bed for small rooms

In this example, the family set the lifting bed in the workshop so that this room could need to become a guest. Depending on the available budget, it is possible to use deciduous wood, Phaneur, MDF or chipboard to build a bed. In this case, Purebond hardwood plywood was chosen. It is argued that this high-quality building material does not contain formaldehyde and has an international quality certificate.

2. Cheap Lifting Bed Option

Spring or piston lifting mechanism can more than double increasing the cost of the lifting bed. Therefore, if you want to save money, you will have to come to terms with the fact that you have to apply certain efforts to open and closing the bed. It's about the set of Lori Wall Kit.

Lori Wall opens and closes manually, because there is no mechanism in it. To help balance the bed, at the bottom of its frame there are rounded protrusions that are folded when closing. Each Lori set comes with assembly drawings and assembly fittings (more than 200 hinges, screws, connectors and bolts). Customers can choose two types of bed orientation: vertical or horizontal and three different bed size.

3. Homemade lifting bed "For mere mortals"

Many people think that it will be able to build a bed at home themselves. It turns out that there are sets for people with a limited budget and zero experience in construction.

For example, a kit from Murphy Bed Hardware has everything you need to build a lifting bed and a phased assembly scheme.

4. Lifting bed for modern interior

A commercial from Katie from ADDICTED 2 DIY literally blew up the Internet. Katie created the only one-of-a-kind furniture system, which includes bookcases and writing desk. Cherry on the cake in this project is a bed. When it is folded, it resembles a storage cabinet, and no one even guesses what mattress is hidden behind her.

5. IKEA lifting bed

The floor from Renovations and Old Houses built his lifting bed using the parts of the PAX series from IKEA, after his wife saw a similar Lifehak about IKEA furniture on TV.

Its project includes an outdoor frame frame and spring mechanism. When assembling and installing, this universal autonomous device is a wardrobe with a built-in bed.

6. PAX bed

This is another self-made bed, which was made from the details of the Pax IKEA wardrobe systems. Norwegian blogger Calvin Gross from Huskverna argues that if someone creates a block frame for a full-sized mattress, he will need a few things, including two pax cabinet frames and a pair of Luröy Beds with Ramami.

7. Transformer Bed

This economical version of the self-made lifting bed from the user Imgur Avalon Awaked was made from the sofa and the Ottoman of the Söderhamn series from IKEA. To simplify the assembly process, the blogger bought The Next Bed - the frame of the bed with a climb mechanism that can be attached to the wall or floor. It is worth keeping in mind that Avalon Awaked has created his own mount for the bed frame so that it opens over the sofa.

8. Basic lifting bed model

The following draft David Picciuto from Make Something TV shows how to make the most simple lifting bed of Murphy using the Side Mount Deluxe Murphy Bed Hardware from Rockler. Each such kit includes assembly instructions.

9. Lifting bed for a child

Some people face the situation when at home you need to "carve out" a place for a schoolboy. Martin Vester used the remaining parts from the IKEA IVAR storage system to create a small lifting bed with built-in racks in his tiny home office. And the most interesting part of this project is that Martin used three plywood shelves to create a bench.

10. Fingering bed

Many lifting beds are separate furniture items that are visible on the wall or floor. Bloggers from Junk In The Trunk can tell how to create a bed that disappears in the folded state, while using the expensive lifting mechanism.

11. Harmonic bed for tiny rooms

Andrew and Crystal Odom - people who live in a tiny apartment. As they could not put the traditional lifting bed in their home, they came up with a similar idea called folding bed. It unfolds like a real harmonica.

12. Bed-cabinet

Anyone can make her hands a lifting bed at home by bought a set from Wilding Wall Beds. It comes with everything you need to create a functional bed, including precised boards. Wood in sets is available at chooser: alder, cherry, red tree, maple or oak.

Everyone who seeks to create a truly cozy and ergonomic interior should pay attention to and on.

Designs for sleeping rooms with lifting device are purchased for furnishing apartments with a small square. Products are reliable, practical, budgetary, functional, ergonomic. Designs are used by a spacious block under the placement of bed linen and things for the bedroom. You can make a bed with a lifting mechanism with your own hands, taking into account the features of the interior design, dimensions and configuration of the room required functional.

Similar articles:

Types of beds with lifting mechanism

Beds with lifting mechanism are available with different types of opening devices, various sizes, configurations, transformation methods.

The classification of the type of lifting device is represented by 3 types: with manual lifting, on spiral springs, on gas shock absorbers.

Mounting with twisted springs is simply mounted, securely in operation. The cost of the fastening system is available. However, the springs are wearing and stretched with violation of the use rules. If several elements are damaged, you will need to change the system completely. The warranty period of the mechanism is no more than 5 years.

The lifting device on gas shock absorbers does not require physical effort during operation, providing easy access to the block under the stuff and linens at the bottom of the bed. Gas devices allow you to move the bed in the open position silently and smoothly. When choosing a system, dimensions and weight of the surface of the sleeping bed are taken into account. Devices are designed for lifting volumetric mattresses. Manufacturers provide a guarantee for the operation of the mechanism for the period up to 10 years.

The hand lift of the sleeping bed (on the hinges) due to the lack of auxiliary elements requires physical effort during bed transformation. However, the strength, durability of the device is large. Manual mechanisms are not equipped with systems for smooth lifting and spring devices, so they have a low price. In order to access the block for bedding, you will need to remove the mattress. In the furnishings of children's rooms, the mechanism is not used.

By the number of sleeping places distinguish single and double models.

Single structures are compact, universal, suitable for small rooms, allowing you to organize an additive place of rest. Models are often manufactured as a ottoman and placed in the corner of the room. Beds of a single-layer format with a lifting device are used in the design of children's and teenage rooms. For the configuration, a spring mechanism is used or gas shock absorbers. The lifting system in narrow beds is mounted along short parts.

Double designs are ergonomic, comfortable, suitable for compact premises and teenage rooms. In the decomposed position, the design provides a comfortable stay.

The mechanism in double models depends on the weight of the bed and the mattress. For massive structures, gas shock absorbers are required for the lungs - spring blocks.

In accordance with the number of furniture united elements, lifting beds are distinguished with a sofa, a bed-ottut, a place to relax, transformed into the tube, etc. Sleeping bed can be embedded in the closet. The latest model is most simple for designing and assembling a lifting bed with your own hands.

Beds are different and ways to lift the sleeping bed: vertical or horizontal.

Blueprints

The manufacture of the design of the lifting bed begins with a detailed study of the drawings and the mounting schemes of the elements. On the sketches, it is necessary to display the dimensions of the components of the product, the methods of fasteners of the end, side parts, etc.

The design of the bed represents a box that is created from 4 plates and 4 transverse elements for the frame of the frame. In drawing up the drawing, the mattress parameters are taken into account, the length can vary from 180 cm, the width is from 80 to 180 cm. It is necessary to determine the size and dimensions of the bed, the number of beds.

Planned additional elements (shelves, drawers) are also placed on the diagram. In preparation, it is important to draw up a scheme for fastening elements with a lifting mechanism.

Tools and materials

For the design of the bed, an array of different wood species is suitable or chipboard - chipboard, fiberboard, MDF, LDSP, OSP. MDF and chipboard sheets are most popular. Wood plates are easy to handle, reliable in operation.

For assembly and assembly work, accessories will be required: self-tapping screws, confirm, corners, edge ribbon, bolts, washers, nuts. Lifting device can be collected independently either purchased in the finished form.

For wood processing and fasteners of bed items, a set of tools is required. These are screwdrivers and screwdrivers, electrolovka, drill, roulette, level, stapler furniture. It will also be suitable for: construction hairdryer, welding machine, hacksaw, clamps, foam rubber, markers, pencils, steel strips.

Step-by-step instruction

Before making transformable furniture, it is required to determine the design features of the model, calculate the configuration and number of components of the elements, determine the sequence of parts assembly.

The work consists of several stages: processing and preparation of structural elements from MDF plates, assembly and fasteners of the body and frames. Then it is necessary to mount the deposit framework, collect the designs of the lifting mechanisms, connect them to the base and place the mattress.

Preparation and assembly of parts from MDF

Details of the design of the MDF are required to cut on ready-made drawings. For the same elements, a template is made for which sample pieces of the bed are measured. Drinking work can be performed independently either to order from the manufacturer, which will simplify the assembly.

For marking parts, it is necessary to place MDF plates on a flat surface. Sheet of wood plate Specialists advise to cut on optimal parts for retraction.

Using a pencil, lines, roulettes on the plates are placed elements of the case. Then the parts of the MDF sheet are mounted on the workbench. We make wooden elements for the body of the bed with an electric bike.

The plates must be made by the grinding machine and cover with varnish. It is required to handle the ends of the structural elements using the edge ribbon for safe operation.

The side of the sidelines, the back wall, headboard, transverse plank are exhibited. From the outside of angular connections, it is necessary to drill holes for configmatics. The cross screwdriver is installed fasteners. The heads of the confirmates are closed with plastic plugs, fasten on PVA glue.

Inside 4 corners of the construct, the screwdriver are installed corners of plastics. To increase the strength of the frame, there is a transverse board, which is connected to the sidewalls with steel corners and screws.

The collected frame is put on the side. On the perimeter of the bed, the leaf for the bottom is mounted with screws. In the corners in the lower parts of the frame, and holes are drilled in the center. They set the legs to which plastic supports fasten, providing a slight movement of furniture.

Installation of the contribution frame under the mattress

The reliability of the operation of the bed is allowed to increase using an additional one. The item is especially recommended for spacious models - double and size "King-Size". The frame is made of steel profile and wooden planks. The form and dimensions of the additional framework are designed in advance under construction. The profile is crucified to the elements according to the drawing, the work is used by Bulgaria. Details are connected by neat welding seams.

Between the transverse and longitudinal details in places of compounds, it is necessary to secure the racks that will increase the strength of the structure will avoid random folding when used. Then you need to handle ends. The legs are attached to the corners of the frame, if the parts are provided by the scheme of the product.

Self-assembly of the lifting device will reduce the cost of making a transformed design. Elements of the system should be with high strength indicators, since the load during operation is distributed not only to the shock absorber and the planks, but also on the attachment nodes, accessories.

The box requires drilled 3-4 openings under the fastener of the system. The design of the lifting device is attached to the design. The base of the bed is lowered inside the box. Taking into account the location of the lower boards, the holes are drilled in each side of the frame.

Between the box and the frame make a gap of 5 to 10 mm in size and set the lifting mechanism. Then tighten the bolts on the top plank. The system is connected by pistons that are attached to the mechanism elements from above and below. Before mounting the device on the bed, it is required to test the reliability of the shock absorbers. There should be no cream and failures when lifting, arbitrary lowering base.

What do you do with old furniture?

5930 2 0

Bed with a lifting mechanism with your own hands: Tools, Materials and Production Options

Try to calculate how much time the bed in the bedroom is used according to its direct destination. On average, no more than a third of a day is obtained, while the rest of the time is bulky furniture, which only takes place in the room. However, you can use the bed with comfort, without clinging to the room. Install the transformer indoors and appreciate the advantages of modern and practical furniture.

Features of such models

What is distinguished by a lifting bed from the usual? The main difference is a folding method. There is a lot of bedroom furniture, where the bed is twice, forming a more or less comfortable seat. In the lifting beds, folding occurs due to the lifting of the bed, which is laid in the housing, mimicing the cabinet, as shown in the diagram.

The lifting bed is found from the wall no more than 60 cm - this is the size of the departure characteristic of the ordinary cabinet. The design can be hidden into a wall niche or in the housing that imitates the cabinet. The furniture in the folded form looks like a wardrobe with swing or sliding doors, which is determined by what facade you choose to arrange its front part.

By type of folding there are two main varieties of lifting beds:

• With vertical folding. In such a design, the bed is connected to the housing in the transverse end and in the closet it is laid in length.
• With horizontal folding. In this design, the bed to the housing is mounted in length and when folding into the cabinet rises the transverse part.

The selection of this or that option depends on the height of the ceiling and the length of the wall. If the ceiling is high, you can apply a design with a vertical folding of the bed. If the ceiling is low and the room is quite large in length, you can apply the horizontal folding models installed along one of the long walls.

By the way, due to the design features, vertical beds can only be single-tier, while horizontal analogs can be installed both in one and in two tiers.

Advantages and disadvantages of homemade furniture

All advantages and disadvantages of transformers are due to their design and larger features.

Benefits:

• Rational use of free space indoor. In the folded form, the design retreats from the wall no more than 60 cm and most of the room remains free.
• Aesthetics of furniture in the interior. The interior without a massive bed looks careful, collected and more attractive. If you doubt, try and you will be pleasantly surprised.
• Compliance with high sanitary standards. The bed is going to the housing along with bed linen, which means the bed does not collect dust and long remains clean and fresh.

Disadvantages:

• High cost of buying beds to order. This is the only drawback, but it is not at all necessary to buy this furniture, because it can be made with your own hands from affordable materials.

Creating a sketch and drawing

Before you begin to develop a drawing, you need to decide on the following factors:

• Dimensions of the room where furniture will be installed.
• Bed type for folding method.
• Type of lifting mechanism.

The drawing of the bed can be developed from scratch, namely, it is possible to calculate the dimensions in accordance with its needs and size of the room, but you can use ready-made solutions.

Necessary materials and tools

Illustrations	What to collect a bed
	From sawn timber. Wooden board and timber - these are materials that are traditionally used for self-assembly of furniture. From sawn timber, it is possible to collect the entire design of the whole, starting with the bed and ending the case. The facade can also be dial from a wooden board or install a furniture shield.
	From chipboard. Chipboard (chipboard) and felt-fledged stove (OSP) are used everywhere to assemble furniture. From the chipboard can be collected and the bed, and the base is the external body of the bed. Given the considerable load on the folding structure, I recommend using not a chipboard, but a more durable OSP. Particularly loaded areas of construction are desirable to amplify lumber.
	Metal. Metal profile is used only for the manufacture of bed and carrier frame. Of the aesthetic considerations, the metal base outside is trimmed with chipstones.

The choice of tools for mounting works depends on how the type of materials will be to work.

If the furniture assembly is performed using sawn timber and chipboard, a screwdriver is required with a bits of a curly slot and with a set of drills. You will also need a cutting tool - a disk saw and an electrolovka. For fitting and fastening parts at right angles, the corner clamps on the tree will be needed.

What to choose a lifting mechanism

The transformer is based on special fittings - lifting mechanism. This device, on the one hand, performs the function of powerful loops, which withstand the weight of the bed, and on the other hand, serves as an adjustment of the folding part of the structure.

Illustrations	Types of lifting mechanisms
	Spring blocks. Based on the lifting mechanism, springs are applied, which, when folding, the beds create an effort, slowing down the decay. Conversely, when folding, the spring provides an effort that simplifies the lifting of the bed.
	Based on gas racks. Gas racks are a modern alternative to springs. Compressed gas slows down the movement of the bed when folding.

What option to choose? And the springs, and gas racks are characterized by a limited resource of the work, since the springs are stretched over time, and gas is gradually disappeared. Theoretically, stretched springs with time can be replaced, while the unit on gas racks is not repaired, but changes to a new mechanism assembly.

Manufacturing technology

After the drawing is selected and selected materials with the corresponding mounting tool, you can start assembling.

During the assembly of the bed, the carrier frame is made - the body, the log cabin, the headboard, and the facade is prepared for decorating the outer part of the finished furniture. Then all previously prepared details are collected together. Consider in more detail the main assembly stages.

Making lifting frames

The lifting frame simultaneously performs the function of the bed. This is a rectangular design, the external perimeter of which is 5 mm less than the internal perimeter of the external case.

The frame is preferably collecting from the board, as this part of the bed is exposed to the greatest loads. First of all, the bed takes on the load of the sleeping person's weight, and in addition, when collecting a transformer on the side walls, the lifting mechanism presses. Therefore, when assembling a frame, the angular compounds are performed using M-shaped hardware and bolts.

The external facade is attached from the inside of the lifting frame at the end of the assembly of the entire design.

Installation of the contribution frame under the mattress

As a reinforcing element of the lifting frame, the lamellas of the mattress holder are used. The lamellas are installed across the body of the bed. When installing lamellas are laid out with a small gap, as a rule, equal to the width of the board used. Lowned lamellas on the edges are fixed by self-drawing of 2 pieces on the edge.

To ensure the safety of the mattress during long-term operation, the head of the screws immediately blend into the surface of the lamellas.

For additional amplification, the lower part of the frame is fed by a solid chickery.

Making the headboard

The headboard is the end part of the frame that forms the bed. Making the headboard outwardly distinguvented from the frame is not necessarily, as this part does not have any functional purpose. But, for the sake of your comfortable sleep and the aesthetic attraction of furniture, the headboard is desirable to cover up soft upholstery.

Making the main carcass

The main frame is an external housing that mimics the side walls of the cabinet. Here, the main load when operating the beds falls on the lower part of the side walls and on the lower wall. Therefore, during the assembly of the design, the connection nodes need to be strengthened.

Attention! Before collecting all the structural elements, we check them for resistance to mechanical loads. If the frame crepts and throws it, it needs to be immediately reinforced by transverse struts.

Installation of lifting mechanisms

Installation of the lifting mechanism is performed at the stage of assembling the bed and the outer case. The inner part of the lifting mechanism is attached to the outer edge of the side walls of the bed. The mount is performed at least 6 screws.

The response part of the lifting mechanism is attached to the inside of the external frame. Regardless of the type of lifting mechanism, the mount should be reliable in order to ensure the durability of the design with regular folding and folding. Immediately at the end of this stage, it is necessary to make sure that the internal and exterior framework opens relative to each other, without having flimsy and without jail.

Installation of support

The final stage of assembling a transformer bed is the installation of supports that are attached to the outer end edge of the furniture. As a rule, supports are made with folding, so that they were not visible on the folded furniture, and they protruded on the laid furniture and held the weight of the whole design.

Let's summarize

Now you know how to independently assemble the bed transformer with the lifting mechanism. If the production of furniture will appear questions, ask them in the comments to the article.

August 1, 2018.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!