Roman curtains with soft folds with their own hands. Roman curtains do it yourself. What fabric is worth sewing curtains in roman style

Decided to independently make Roman curtains? The solution is absolutely correct! This design created by the old Roman sailors will be interesting, relevant and modernly look at almost any interior. Such curtains are very popular, they are available at a price and easy to use. Make them of segments of material.

At the request of the owner, the segments can be collected by the accordion or expanded. The most important thing is to figure out how to make Roman curtains so that everything goes quickly and without unnecessary problems. For sewing some models, translucent materials are used. Such Roman curtains replace tulle. There are no difficulties in independent sewing such curtains, you only need to carefully examine the sequence of work and do everything in accordance with technology.

Selection of material for Roman curtains and preparation of instruments

Roman curtains are best sewing from more rigid materials. It is important that the fabric keeps the form well. Then the finished curtains will serve as long as possible. However, you can choose more soft Material. At this stage, it all depends solely on what result you want to get. Fabrics on Roman curtains leaves a bit, so it is recommended not to save, but to buy a good expensive material. In general, orient to your personal preferences.

In addition to the material, you will need a number. additional tools and devices, namely:

Tools and materials for the manufacture of Roman curtains: stapler, planks, fabric, thread, glue, knife.

1. Two wooden bar. One of them should have the length of the future curtain, the second is width.
2. Rail. In length, this rail should be a bit shorter than the future Roman curtains.
3. Decorative velcro and braid tape over the width of the curtains.
4. Plastic or metal rings. Most optimally use rings with a diameter of 12 mm.
5. Nylon cord. You will need 3 segments. Two of them must correspond to the length of the curtain, one - width.
6. Fasteners for cord.
7. Scissors.
8. Santimeter tape or roulette.

Usually everything necessary materials Sold in specialized stores of fabrics and sewing accessories.

Back to the category

Step-by-step instructions for revealing Roman curtains

One of the most important stages of the sewing of the Roman curtain is the window and cutting. First you need to measure the width of the window. Add 25 mm per side to the resulting value. It will be the width of the curtain. Next, measure the height of the window and add 12 cm on the allowance. As for the allowance, 2 cm will go to upper Sow., and the remaining - on a double bending on the bottom, i.e. 5 cm each. Thus, deciding to make Roman curtains, you need to focus on the size of your window opening. The number of folds and their size, too, consider the size of the window structure. The main thing is that as a result everything looks beautiful.

Before starting to cut the Roman curtains, swallow the fabric. From the inside you need to make marking. To do this, use the tailor chalk or a piece of soap. Make a line of folds, sewing places of rings and flex line.

Return from the bottom edge of the material half the width of the fold. So you make a place for the first fold. The remaining lines need to be located equally, making them equal width. Directly the width of the folds, choose yourself, no restrictions here.

Back to the category

The easiest option of sewing Roman curtains

SAMI simple modelwhich is done as much as possible, does not imply the presence of pins, but is done with a weight loss. Thanks to it, Roman curtains will save horizontal at the bottom edge. Such Roman curtains have several advantages, including:

1. Maximum simplicity. Curtains can be done, not even having skills of such work.
2. Soften and interesting folds.
3. Related and original appearance.

First you need to decate the lining and the main material of the curtain. Take the cloth, soak it for 15-20 minutes in hot water, Then let's dry and join. After that, proceed to creating patterns. Roman curtains do not require any complex patterns. It is enough to draw a rectangle in the size of the window, adding about 3 cm on the seams and about 10 cm to height. Cut the fabric, then fold the lining and the basis of the face to each other, sweep, shoot and remove. You also need to trim the corners.

Make a stem for weightlifter. To do this, it is enough to complete from the bottom of the order of 25 mm of the material on the wrong one, fought and set the edge. Next you will need to spend a horizontal line on the top edge of the curtain. Above this line will take a soft part of the sticky tape. Do it on the front side of the curtains.

Becut the sticky tape on the wrong one, after which they will detect it on another edge and cut the surplus of the material. Post your Roman curtains on the sections of the same size and where the cord will pass, the rings. At the end, you need to insert a cradle in the scene. This is simple, but very beautiful Roman curtains are ready.

Back to the category

Tailoring of Roman Curtains

A little more complex option, but without any special problems with your own hands. It is best to sew such Roman curtains from a loose one-photon material. You need to try to make as possible cutting as possible and perform a free snack, which would not be tightened by the material.

First you need to decide the material. Do as in the previous instruction. Consider the fact that such Roman curtains are made without lining. Collect the material, not forgetting to add 3 cm on each side on the seams. Treat the sides of the future curtain with double bending. It must have a size of 15x15 mm.

Next, you need to prepare the scene for a cradle. Make it with a width of 25 mm. Divide the markup of its Roman curtains on the sections of the same width. Optimally - by 20-25 cm. Next, you will need to postpone on the first 15 mm markup from the scenery. It will be fixed on the side of the curtains. Measure the width of the next section, make a hurry, and so on the entire curtains. If you do everything correctly, then the coverage will result in 1 less than sections.

Follow the second side edge of the Roman curtains. Next you will need to stop the hinders. To do this, find the middle of each of them and connect them to an ordinary straight line parallel to the bottom edge of the curtain. After that, overload the material on this line, scroll with the pin and shoot the resulting collar, retreating about 7 mm from its edge.

Bed up the replaces, then spend the right horizontal marking line at the top of the Roman curtains. Take the velcro tape as described in the previous instruction. At the end, you need to sew rings for cords along the line of covers from the inside and at the top of the scenes, insert the rods into the covers, and the weightlifter in the scene. On this excellent Roman curtains are ready!

Back to the category

The most popular model of Roman curtains

These Roman curtains enjoy the greatest popularity. They are not harder than previous, but they look much more effectively. For the basics will suit any material. The lining must be combined with a tone with the main cloth.

Soak, dry and swallow both of the material cut. Thanks to this, your future Roman curtains will look more thorough. Take out the rectangle. It is important to determine right size This rectangle. To do this, measure your window and add 10 cm input in height and 1.5 cm for 3 other sides. Cut the base and lining, fold them face to each other and sweep. Cut the curtains with three sides, then remove, cutting the corners, and endure the iron.

Make a skeleton for a weighting agent, as in previous instructions, then detect a sticky tape in a familiar sequence. Divide the cloth on a section of about 25 cm wide and mark them with straight lines. Plicit along the obtained lines with a decorative braid with a width of 1-1.5 cm.

Next you need to push the ribbons, making from each edge on the line. On the sides it is necessary to leave holes to make the rod. In the scenes you need to make a weight loss and bars. Upon completion will remain sewing rings for the cord. On this beautiful Roman curtains are ready.

Back to the category

How to make a roman scope with figured bottom?

As a basis for such curtains, you can take Roman curtains from the above instructions. The only difference lies in the fact that the bottom will be figured. You can cut it with a patterned line or festons.

So that the curly bottom is visible from under the folds of the curtain when assembling, it is necessary during the cutting to divide the full height of the curtains in such a way that the first section is measured from the bottom of the figure of the Cant. The lower rings for the cord must be sewed to the lower rod with a rod, and not to the weighting agent.

If the Roman Curtain is sewn without twigs, it is necessary to simply increase the width of Kant from 10 to 25 cm.

Back to the category

How to fix ready-made Roman curtains?

Roman curtains can be mounted on the edge or directly inside the window opening. This moment is recommended to be thought out even before the start of cutting. In accordance with the attachment method, calculated required amount Fabrics and patterns.

Option with fastening in window noise It is best for those cases when the windowsill has too much width or curtains applied in a complex with ordinary porters. In this case, Roman curtains are placed in close proximity to the glass, and the windowsill remain free.

To give the choice in favor of the second fastening method, it makes sense in cases where the window opens over the entire height and has folded sash. In this case, the curtain is exhibited so that the slopes are closed by about 5-10 cm on both sides of the window structure.

The curtains are attached in the following order.

First to the bottom wooden barOn which the Roman curtains are fixed, the velcro tape is attached. It is done by small furniture nails or furniture stapler. After that, at the bottom of the sticky tape on the bar, you need to screw the screws with the same step. Use screws with rings instead of hats. Further, ready-made Roman curtains with a pre-installed velcro are attached to the bar.

After that, you need one of the side parts of the curtain, ranging from the lower ring, to turn the cord through all the rings and tie it at the bottom of the knot. To enhance the strength, the node can be additionally made with glue. In the same order, the remaining cords and secure them on the rings of the plank. After that, all cords need to withdraw on one side of the curtains. There they are going together and dragged through the holder's stopper. The holder is fixed on the edge of the plank. The ends of the cords are aligned and binds to the node. After that, at the level of the middle of the window, you need to fasten the hook, with which the pickups will be fixed. The Roman curtains themselves add up to the "harmonic", after which the cords are wound on the hook.

When cords are filmed from the hook, the Roman curtains will fall. On this, the fastening process can be considered completed.

IN lately Many beginner needlewomen are interested in the sewing of Roman (Greek, rolled) curtains with their own hands. The growing popularity of Roman (rolled) curtains is associated with the fact that this species Curtains can be easily sewed from girlfriend. And the tailoring of these original curtains to the kitchen (in the room) does not take much time and effort.

With work on the sewing of such curtains from the primary materials, any beginner seamstress will cope, the main thing - to choose qualitative material In order to sew the most elegant and functional curtains with beautiful folds. Especially spectacular Roman (rolled) curtains look in the kitchen, but they will be relevant in the living room and in the bedroom. They fit perfectly to the most different styles Designation.

Before planning sewing the original curtains in the roman style, novice craftsmen recommended to visit the master class on the sewing curtains. If it is not possible to personally visit the master class, nothing terrible. A visit to the master class can be safely replaced by viewing the most different learning video.

In order to see and remember how to sew the Roman curtains with your own hands, it is enough to type in the library of the Internet about such a phrase: "Roman or rolled curtains do it yourself step-by-step instruction" On the thematic channels of YouTube, the recognized masters of home needlework willingly tell how to sew a rolled (Roman) curtains with folds into the kitchen from the girlfriend. The main secret of the sewing is to make beautiful folds. To do this, sew curtains from high-quality material.

In order to make Roman curtains with folding materials, you will need:

How not to guess with color?

Coloring can be any. Perfect option - A set of Roman curtains weathered in one style and made of one material. You can also perform a set of one material, but in such a way that the curtains differ slightly in color (tint). In order to make the room lighter, bright, cheerful shades (orange, yellow), heavenly blue and pastel shades. For the bedroom, on the contrary, the colors are suitable, visually darkening the room and set to sleep: dark blue, dark green, saturated burgundy and purple). Speeciously looks at the curtains with a "velvet" effect.

Roman curtains will look good not only as curtains covering the window. Such a scope can also be used as a screen. Also, the Roman Curtain can share the room into two zones: for example, on working area and recreation area. With this original curtains You can cover a small storage room in the hallway or close the counters hot and cold waterlocated in the toilet. Such a curtain will be perfectly looked at the cottage, in country house. The options for using the Roman curtains are many, because thanks to their simple and concise forms, they fit perfectly in any interior.

Sewing of the Roman Curtain: the choice of material

The material for Roman curtains is recommended to purchase in specialized stores. It can be any, the main thing is that the material is tight enough and kept well the form. Only in this case it will turn out to form characteristic folds. At the same time, the material should be soft enough to make it convenient to draw and sew from it. If you use waterproof fabric to sewing a roman curtain, such a curtain can be used instead of a bathroom curtain.

Coloring can be any. In order for the Roman curtains to please the eyes and organically fit into the interior, when choosing a color it is necessary to keep in mind the following:

In order to proceed with the independent manufacture of Roman curtains, it is necessary to follow the following sequence of actions:

Curtains do it yourself from progress materials: Practical recommendations

In order to sew the spectacular Roman curtains, in its appearance, not inferior to purchased curtains, it is necessary to comply with important practical recommendations.

The material from which the Roman curtains are sewed must be resistant to direct sun ray. Otherwise, the curtains can very quickly burn in the sun, especially if the windows in the room or in the kitchen come out on the south.

During the manufacture of products, it is necessary to pay special attention to the reliability of the attachment. It is necessary to check the strength of the bar to which the finished curtain will be attached. Metal or plastic rings Also should be dense and durable. Instead of rings, you can use decorative clothespins or clamps. All accessories must be purchased in specialized stores.

Roman curtains have recently become very popular. They can be purchased in the store or do it yourself. The main advantage of the curtains made by their own hands is that a beginner needlewoman can independently choose a color and material, as well as make the desired amount of folds. As a result, unique curtains are obtained, able to adequately decorate any interior. Beauty and functionality are the main features of the elegant Roman curtains made with their own hands from the girlfriend.

Among the connoisseurs of modern and stylish window decor, the lift roman curtains are popular. They are different sizes And colors, and please buyers with all their qualities except the price, but it does not matter for those owners who love and know how to make.

Roman curtains to sew with their own hands, as it turns out, is not very difficult, the main thing is to be patient and the necessary materials. How to make them we will tell in this article with detailed master class. Of course, you can make an order tailoring of the curtain in the studio, but things that we ourselves do for your home carry a special, positive energy. Do not be lazy and read the article carefully and to the end, and then you can create your own masterpiece.

How to make measurements

At home, Roman curtains do not so hard, the main thing to choose correct material And make accurate measurements. Also measurements affect the number of fabric required. So, Romans can be installed both inside the opening and on the wall above the window. We measure the height and width of the window, where the curtains will hang and add 5-7 cm in the side, and at the top and at the bottom of 10 cm for fixing the weighting agent.

In order for the folds to be smooth, and the distance between them is the same, it is necessary to calculate it correctly. To do this, use the approximate calculation table. We define the number of folds, the height of the curtains is divided by their number and get the distance between them, it should be no more than 30 cm.

Table of exemplary calculations of the number of folds on the curtain and widths between them

What may take

Make Roman curtains will help the necessary materials and tools that will need to buy in advance, and perhaps something from the list will be at home.

• Fabric, thread, scissors, needles.
• Roulette for measurements and cutting.
• Wooden or plastic strips cradles.
• Velcro tape for fixing the canvas on the cornice.
• Ponds from wood, plastic or metal, which will penetrate the speed and form folds.
• Plastic rings, there must be two or three rings for one twig.
• Nylon cords: 3 pieces, 2 of which have a length of two curtain lengths, the third length plus width.

Step-by-step instructions for the manufacture of lifting curtains

Now that everything is ready for self-making Roman curtains you can safely start sewing. This will help you with detailed step-by-step instructions accompanied by information photos and videos nearby.

1. Make the window measurements and buy the required amount of fabric. You can sew your curtains as in one layer of fabric, so in two. It depends primarily on the tissue density, if it is thin, it is better to sew a double canvas. Then the material will be twice as much.

2. Calculate the number of folds according to the height of the opening to sew the curtains that fit your window.

3. Call the product as shown in the photo. Do not forget to leave allowances for edges processing. In the lower part there should be a large allowance, as it will later be a pocket for a weighting agent. From the inside, notice the places where the rods will be inserted and plastic rings are fastened.

4. Cut the workpiece and process the edges with a double bending. You can also use the adhesive tape-web, which, with a hot iron gluits cloth.

5. If you have a double curtain, then folding two parts by the front sides inside, susht them, leaving one edge unimposed.

6. Now you need to make special siding to insert frame rods. To do this, you will need specially chopped tissue strips or ready-made combat braid. Send it as a pocket from three sides, one left unimposed so that the pins can be easily reached before washing. The rods must be smooth and easily sliding along the fabric, so it is better to choose them from plastic or metal.

7. Having placed the arrangement of the rings. SHEE them to the pockets manually, they will serve as the basis for the lifting mechanism. Attention! The rings to make the cords should be as much as you consider it necessary, but at the same time the curtains should easily climb.

8. To the upper edge of the trick one part of the velcro, and the second stick to the future eaves.

9. Turn the bottom edge so that it is the same Kulis, where the rail will be traded.

10. Grind the cords in the rings from the bottom to the top, bring them to the extreme ring with the shortest cord. Tie all cords into the node, and roll up the speed itself and tie the ribbon.

11. Lock the eaves in the form of a plank on a frame or wall above the window, depending on where you planned to hang Rima made by your own hands. On the plastic windowsIn the event that the curtains will be attached to the frame, the eaves can be hung using bilateral tape.

12. Hang the Roman curtain to the cornice with velcro. Remove the ribbon and adjust the tension level of the lifting cords, check the serviceability of the mechanism. Tie cords in the node at the top and bottom, doinched extra edge. So that the curtain remains at the desired level it is necessary to fix the cords on the side of the wall hook.

Turn old blinds in Roman curtains

Plastic blinds are not in fashion for a long time, many of them were on the windows at a certain period of time, and they always quickly broke. So if you or your relatives have such unnecessary blinds, then you can give them a second life, turning them into homemade Roman curtains.

How to make Roman curtains from old blinds you will find out by reading a detailed description.

1. As in the previous case, we make window measurements, pay attention that the width of the curtains will be like a blindness, but the length can be the one that you need.

2. Cut out the cutting part and process the edges of the bending with the line or using the adhesive tape. Here on the lower edge is not needed large points, as it will be turned out and glued to the bar. We sew the product is not in a hurry, given all the nuances.

3. Blinds need to save unnecessary lamellae, leave as much as folds are planned to be made. To do this, remove blocking locks from the cords, unleash all the nodes and remove unnecessary planks. They will need approximately 6-7 pieces, depending on the height of the window. Cut extra ropes.

4. The upper edge we add and sew one part of the velcro on it. Secondly glue on the cornice blinds.

5. We apply glue through the lines marked and glue the lamella to Rimka, the lower edge we bring and also glue to the weighting agent. Remember: the distance between the slats should be the same.

6. Jewelry ready product On the window opening. Check the serviceability of the curtain lifting mechanism and rejoice in the hand-made novelty of the decor in your home.

Decorating the upper and lower edge

So that your Roman curtain does not look boring and monotonous we suggest to consider several ways to decorate her. So, upper region You can make a traditional lambrene. Moreover, it can be both rigid and soft, both with a straight edge and with oblique.

For the manufacture of solid lambrequin, you will need a rigid base, it can be in the form of a dense cardboard. We make the pattern of decoration, consider this kind of lambrequin should be long and completely close the upper part of the side edges of the Roman cloth. Cut out the workpiece, with the help of glue, we plant the fabric on the cardboard basis of the same form. Let the design dry. For the installation of the Roman curtains with lambrequin, a special double cornice will be required, which you can do yourself either in a specialized store.

With a soft lambrequin, the situation is easier. Its production will not require a lot of time and effort. To do this, first decide which form it will be, perhaps even from another similar fabric. You can make a simple lambrequin in the form of a long volana along the entire width of the curtains. Either it will be a decor in the form of a band of a tissue, beautifully hanging in the center, and its edges on the sides. In general, your fantasy is not a limit and you can come up with a completely extraordinary way to decorate.

For us, we are familiar to decorating the top of the curtains of any type, but forgot about the bottom everything, but we are not. That is why we will tell and show the photo how to do it beautifully and tastefully. For kitchen B. rustic style With the presence of strict Roman curtains that you even sewed on your own, a certain cold appears, and to melt it decorate the bottom edge of the canvas with romantic wide lace or a waist of the same fabric. The fringe with tassels to your surprise here is a great way to make a variety of the traditional type of lifting porter.

Why hostess choose Roman curtains

A unique way to decorate the window is known since the times of ancient Rome. They have gained their popularity today as cross-linked Roman curtains on their own, and ready-made from the manufacturer. But for what they loved them? What they were able to get the traditional plastic blinds? Let's deal with.

• Roman curtains are suitable for small rooms and the same little windows.
• They take up little space and allow you to use the windowsill fully, unlike the classic long porter.
• Easy to care: do not require frequent wash and a dry method of cleaning with a rag and a vacuum cleaner is suitable.
• Release approach to the window and make it possible to put a sofa or bed near the window, then when with long curtains it causes inconvenience.
• Easy to hang and shoot.
• Economical independent manufactureSince they will leave less fabric than regular curtains.

As you can see, there are no obstacles to the sewing of the Roman curtains with their own hands, so feel free to take it.

Best fabrics for Roman curtains

Tailoring of the Roman curtains should begin with a selection of material. For their manufacture, absolutely any fabrics are suitable, both very dense and light veils. But it is still better to give preference to more dense matters, as they will be able to emphasize all the beauty of symmetric folds, and in lowered the form it will be a smooth, severely hanging canvas. From concrete tissues, we can allocate tight and translucent cotton, flax, heavy atlas and jacquard.

In order to make the Roman Curtains made with their own hands, it was not just beautiful, but also functional, it is very important to determine how your room needs a darkening, or you want to skother to skip light. All this depends on the tissue. That the room simultaneously remained bright and protected from the scorch rays of the sun, choose light tissues dense by texture. Translucent Romans will simultaneously protect the room from prying eyes and let the necessary light.

For full protection against burnout and just annoying rays, we recommend choose unique material with the effect of black out. Its purged side is saturated with a special solution that protects against burnout not only the curtains themselves, but also the walls with furniture.

For the living room and bedroom, the choice of fabric will not be labor, here it can be different. But for the kitchen it will take material with special properties. After all, no matter how hard you tried, random stains, which have eaten odors and soot are inevitable. Therefore, here the very place is practical and wear-resistant materials. Manufacturers took into account all these nuances and created a wonderful special fabric for kitchen curtains. These are mainly polyester with water, mud and refractory impregnations.

The color and drawing of your chosen fabric for the Roman curtain should come to the whole interior. Single materials are the most universal, they are suitable for any atmosphere, but when choosing a patterned tissue, pay attention to that there are such colors in your everyday or where else can you repeat them. Pay attention to the selection of textures. For modern style the best choice These are smooth fabrics, and for funeral Baroque and Ampire are incredibly good drawings and bulk embroidery.

We suggest a video about how to make Roman curtains do it yourself.

The curtains have always been a link in the interior, they can be pompous and pay all attention to themselves, and they can be a functional element and simply complement or emphasize the interior. Any room is filled with a special atmosphere and acquires original viewIf textiles harmonizing with its shared decoration.

Of course, you can buy curtains ready for example), to order in a sewing workshop, but the subject of real pride will be only those who are stitched with their own hands. And if you own minimal sewing skills (you know how to use sewing machine and make elementary patterns), then we can assume that independent production The curtain will be successful.

What should be considered before sewing the Roman curtains do it yourself?

At first glance, the manufacture of Roman curtains may seem like something unreal. In fact, everything is quite simple. This curtain is a rectangle of the canvas without any drapes and folds, its size strictly corresponds to the size of the window.

She can skip the light, and can completely prevent the sun's getting into the room. But in any case, the cloth must be dense to get perfect and beautiful curtains, with your own hands stitched.

First you need to decide how the curtains will be attached, this is exactly what affects the required amount of fabric. There are two mounting options. The first option is when the curtain is attached to the window. In this case, the fabric will be at the glass itself, this option is perfect for windows with wide window sills. And if the kit is envisaged with the porters, then it is necessary to choose everything to harmonize so that the ensemble is united. The second option is a mount on the wall. In this case, the width of the curtains should be greater than 20 cm, so that it can be 10 cm on each side.

How to sew a roman step-by-step

Deciding with the size of the curtains, you need to decide whether you will use the lining or simply roll the cloth twice. What you need, if we sew a pad with a lining:

Having measured the window, add 5 cm on the side seams and to the top bottom of 15 cm. With this account you buy tissue and lining. We take the main fabric, outlining the poda lines on the sides and start them, on top and bottom you make socios so that the side can be inserted at the bottom. Take a cloth for lining and also bend it and start the edges. Now overlap on the wrong side of the main fabric lining and possession of all edges. To the top sew the tape with sticky base.

The next step how to sew the Roman curtains do it yourself

Then, so that it turns out beautiful drapery, you need to calculate the number of folds. The folds must be the same, so divide the entire length of the curtains on the required amount of folds. For example, a length of 120 cm, you will make 7 folds, then divide 120 to 7 and get 17.1 cm.

That's precisely at such a distance, pockets for rails will be sewn. Place the lining side and sew your pockets. They can be made of dense tapes, from braid or made of rolled tissue.

Now manually sew the rings, as shown in the picture.

Then insert the rods into pockets (they can be chopped from the stroke for windows), and insert a weightlifter to the bottom pocket. Curtain ready! It remains to join the wall a predetermined bar with a sticky ribbon and to attach a chart to it. To fix the slope in the highlight, you need to make a hook to the wall, to which you will wind the cord for fixing it in the raised position.

Now you know how to sew the Roman curtains with your own hands. I would like to note that the most elegant curtains are obtained from a rich fabric with an exquisite pattern. But this is already at your discretion, the first of its scope can be made of cheaper fabric, and if everything works out, then use more expensive options.

Roman curtains do not have competitors in terms of simplicity and functionality, as they are well combined with both tlea curtains and porcores from heavy fabrics. How to sew the Roman scope, more and more people are interested. More often for the manufacture of Roman curtains use opaque heavy tissues. According to its roots, Roman curtains go to the distant past - it is believed that they are borrowed from the sailors of ancient Rome, from here and their name.

With the help of a curtain of this kind, you can create an interior in japanese style Or in the style of minimalism, as well as increase visually the space of the dwelling, opening access to the window. Unlike blindness, Roman curtains do not have such an inappropriate formal for residential premises of the species - even one-picture textile creates the atmosphere of comfort in the room.

Materials and Tools for sewing

Despite its simplicity, this kind of blocking for windows is gaining increasing popularity. Places they occupy a little, and the fabrics compared to other models are significantly less, the simplicity of the design allows you to make such a corter on your own, not too boring. Before sewing, you need to stock in the following instruments and materials:

• the cloth;
• wooden bar;
• threads in the color of the fabric;
• duct tape;
• rings;
• small carnations;
• a hammer;
• pencil or marker;
• cord;
• scissors;
• wooden rails.

The coloring and composition of the fabric is not important, but it is preferable to choose dense non-checking tissues, as Roman curtains are intended to protect the rooms from sunlight and strangers. The selected fabric should not be too soft, for this model you need a clear preservation of the shape. It will be not one month old to serve the selected fabric and, perhaps, not even one year, so the fabric must be high-quality, not sacrificing from washes and not burning in the sun. A striped or monophonic fabric will give each flap of sewing and every irregular line, while the cell, rhombus or colorful floral ornament will hide them.

A wooden timber is needed for fastening the top of the curtains on the window opening and for tracing the canvas down, its length corresponds to the width of the fabric. The cord needs to choose a durable, but not sliding to consolidate it in right position Did not constitute problems. In each fold, you need to insert a rod from any material rather durable and easy to keep the shape of the curtains, but so that it does not fall under the weight of several such rods. Their number is equal to the number of folds on the curtains.

Rings through which the cord will pass along the entire length of the tissue, should pass it freely, so the diameter is selected 1-1.5 cm. They can be both plastic and metal, you can independently make them made of metal wire.

Back to the category

Roman curtains do it yourself: preparation

Sewing of the curtain of any type independently begins with a thorough measurement of the window opening. According to the results, it is necessary to make mandatory clarifications that require Roman curtains: 5 cm is added to the width of the opening, 2.5 cm on each side. To height, it is necessary to add 8 cm, of which 1 cm remains on double bending, 5 cm on the lower pocket for the bar and 2 cm on the upper mount. The number of folds are calculated on each channel separately depending on its width and length to eliminate the ugly cheating of the fabric.

The fabric before starting markup and cutting must be weted with warm water and smooth the hot iron to subsequently eliminate the shrinkage and inconsistency of the scheme. Mainly, the amount of additional tissue affects the method of fastening the curtains, since when it is consistent with the special cornice, additional points on the rail will not be required.

Carnate can be attached in two ways - on the window or on the wall.

When mounting on the window, the curtain fabric is located at the glass itself, this option is usually chosen for window Operactions With volumetric, wide windowsill to have access to it. Ordinary curtains at the juroring will cut it from the room space, and the Roman curtains will allow them to use them, being reliably protected from outsided views from the street. This fastening is justified and in the case when the windowsill goes to the desktop. When mounting on the wall, the cornice should be wider opening windows by 10-20 cm to close the window opening along with the slopes.

Back to the category

Curtains do it yourself: cutting fabric

The fabric prepared under Roman curtains must be spread on the table, on the floor or any other smooth clean surface face down. With a chalk, a special pencil or marker are placed on the canvas all the necessary lines using a ruler. It is necessary to place Roman curtains, designating the lines of the sovereign, each fold, fastening of the rings and the upper and lower bending. The distance between the folds is most often done standard and is equal to 30 cm. All lines must be symmetrical and the distance between them is made the same.

Sometimes Roman curtains are sewn with a lining that is sewn on the wrong side and hides all the attachments under it. In this case, the lining is cut out in the same way as the main part, then they are folded by the front parties and are cleaned with pins for smooth lines during stitching. On the upper or lower part, a small hole is left, through which the curtain with a lining turns on the face, then it is neatly sewn by manually by a secret seam.