Hanging bed. Comfortable hanging bed with your own hands. Bed on four fasteners

Even the most common bed can be decorated with the interior, if approaching it is non-standard - for example, do not put on the legs, but to suspend. We receive not only an interesting detail of the room design, but also as a bonus - an improvement in sleep. Easy swaying, as in the children's cradle or on your hands at mom, can be more efficient to sleep. Not in vain a favorite place of rest at the cottage - a hammock, allowing you to fully relax and lose the cargo of concerns at least for a while. Due to the diversity of hanging beds, everyone can choose to choose yourself and in capabilities.

The form

The most popular rectangular and round pendant beds, although bizarre designs are also found, but somewhat less often. This is already designer stuffCustomized under defined.

Suspended beds are practically no different from ordinary - they can be single and double, massive and lightweight, adults and children's.

If a we are talking About a full-fledged bed, these are massive, reliable structures designed for increased loads. They are most often rectangular, with berthi-limiters or a free perimeter. The exceptions are children's hanging beds, imitating ships, cars, flowers or fabulous houses.

Round suspended beds - based on metal hoopAnd inside a tensioned tight canvas, the tops of the masking suspension can be on top. As an option - a peculiar wicker "Lukokhko" of a round shape, with a back, inside which mattress is packaged. Although sometimes round pendant beds are nightly, but in most cases they are still used for temporary relax.

Outboard beds for daytime recreation more remind comfortable sofas with backs and sidewalls, which are convenient not only to lie down, but also sit. They are, as a rule, narrow, designed either on several sitting, or on one lying - this is the option of a suspended bed that is used outside the room - on terraces, verandas, in arbors.

In fact, this is an improved hammock - more stylish and comfortable spot For day mosques in fresh rest.

Suspension

There are four options for fastening a hanging bed:

Floating bunch.
Rigid bunch.
Combined bunch.
Stanna.

Floating bunch - Fastening to the ceiling, a thick rope is used as suspension (rope, special decorative strapping, kapron cord), metal chains (ordinary or carved forging). Restriction for this type of installation load bearing capacity The overlaps - not everyone will withstand a massive design, and even with people lying on it. However, if the beams or stoves are able to cope with the load, this fastening is the most advantageous. And it looks attractive, and the place saves, and you can hang, where I am pleased, if only there was an indentation from the wall for the maneuver.

Tough binder - Fastening the bed to the ceiling by means of a metal angular profile, from four sides. A feature of this method is the height of the fastening - the bed hangs at the top of the room, almost under the ceiling. Such a suspension allows you to significantly save space - in a small room there can be a bed, and put the furniture and work desk at the bottom. If there is no claustrophobic or fear of height, it is a good option that allows you to improve the housing conditions, however, when the ceiling height is appropriate.

Combined bunch - The bed headboard is mounted in the wall, and the second end on a floating bundle. Such a combination makes it possible to reduce the load on the overlap, but to run, as in childhood, will not succeed. The main purpose of this installation is to make a stylish interior detail from the usual furniture item. In the children's rooms, the fastening of one long side of the bed to the wall, and the second to the ceiling or also to the wall forms the second tier, saving space. Another option of the combined bundle is "cheering" or "soaring" bed when fasteners in the wall only from the head of the head. For an additional fixation under the bed, a transparent backup is installed - if you wipe the dust in time, a complete illusion is created that the bed has hung in the air. Proper backlight Enhances the effect.

Stanina - When there is no possibility to attach the bed to the ceiling, an independent design-support is used to which the rectangular or round bed is suspended. The bed is usually two poles with an additional lower support in the form of a trapezoid or rhombus, which gives stability, the bed is suspended between the columns. The exact design of the support depends on the dimensions of the bed and the manufacturer.

Selfieckers

Purchased hanging bed, like anything of the most necessary item, is expensive, even if it is collected entirely of plywood, not valuable wood wood. And to make it yourself, you will have to spend money on materials, but it turns out cheaper and not a typical assembly, but an exclusive. One of the most simple options, not counting the hanging on the rope of building pallets - the frame from the bar, and the bottom and the side of the plywood. Even easier - frame from the bar, the bottom of plywood and no sideboards. As a suspension, both rope and chains are suitable. You can get along and a fastener flooring with a firmware - a tree appearance (sanding, sanding, opening with varnish, wax, butter) make a shield, hang on a floating bundle.

As, ordinary or suspension, will be taught on our portal, the experience of many home masters is collected here. On interesting I. unusual material For interior finish - in the article. How, lying on the bed, leave notes directly on the walls, without spoiling the design - in the material. - Learn how this universal composition can be used.

If you need a bed for home, apartments or cottages, do not limit your choice with traditional stationary models. Suspended bed with your own hands will not only provide you with a comfortable place for a full-fledged rest, but also takes to the world of childhood, it will give pleasure, a dreamy mood. After all, it is suspended structures Most associated with relaxation, carefree mood, rest in exotic places.

Today, such products returned to themselves deserved popularity and occupied places in children's rooms, bedrooms, terraces, in the courtyards country houses, PR. It is the suspension analogues of beds in classical design, original round soaring beds various stylized models and no less comfortable, but accessible to each pallets.

Suspended beds seem to float on the floor. To fully created the atmosphere of lightness, airiness, there should be no other furniture items around the bed. But you can decorate the floor with a beautiful carpet of any shape and the size of the pile, without worrying that it is damaged by legs. After all, the entire load on the weight of the bed, as well as the sleeping in it falls at the places of fasteners (wall or ceiling). It is important not to save on the accessories, but to correctly calculate the weight. Inattention to this question can make a bed dangerous.

The main feature of hanging beds is their ability to swing at the slightest movement. As a rule, such an effect like children and adults. But if it is not so, you can make a hanging bed with hard fasteners.

Classic hanging bed

SAMI simple model Beds suspended to the ceiling or wall will always remain the most popular. Taking her design as a basis, you can create a lot original options: Beds with a canopy for princess, in the form of deck pirate ship on ropes, or just a romantic bed swing for relaxing on fresh air.

If you still do not have a place where you can enjoy calmly shaking, highlight a little time to make a hanging bed. Work will not be too complicated, does not take much time. The size of the base will allow one single mattress on it and still stay a little space to put a favorite book, put a cup of coffee.

How to prepare for work

To create a bed swing, you need to prepare materials and tools:

20 boards with parameters 5x10 cm 2 m long - to assemble the surface of the bed and frame. You can choose for the frame more dense material or a timber.
Euro shop for pocket holes, 5 cm screws.
Strong rope (or chain), which is able to withstand the load of about 120 kg, - 15 m.
4 special bolts with ropes or chain hanging rings.
Moril.
Putty.
Paint.
Roulette.

Corolnic
Pencil.
A hammer.
Conductor for pocket holes.
Circular saw.
Drill.
Grinding machine.
Building level.

Do not forget to use when working for personal protection: glasses and headphones. The image below demonstrates the size and design of the bed swing.

Prepare the place assembly. Choose the most smooth and clean surface. This will make it easier to work, it will help to create a smooth base on which the mattress and other items will be held. Start with the cutting of the desired billets. Use circular saw For cutting:

2 boards (or bar) 5 × 10 cm 1.90 m long for long frame parts;
6 boards (or bars) 5 × 10 cm 1 m long for short parts frame and base lattice;
12 boards 5x10 cm long 2 m - elements of flooring.

Step-by-step instruction

Start from the assembly of the base frame. Collect a frame of two boards with a length of 1.9 m and 6 meter cross. Immediately, using a roulette and a pencil, make the markup so that the transverse bars are located in one distance from one another. Prepare pocket holes with a special conductor. Apply glue to the locations of the connections and the propellers, pull the parts 5 cm screws for pocket holes.

Pocket parts of parts are performed by wood fibers. Together with glue and screws is ensured maximum reliable connection details. In addition, after processing, pocket connections are almost invisible.

On the frame, lay out the floorboards of the flooring so that from all sides of their edges to appear for the external frame limits of approximately 25 mm. Fix each board with glue and two screws to each transverse bar (Total - 12 screws). Between the boards, leave a gap from 8 to 12 mm. The loose layout of the boards will give greater surface stiffness so that the mattress does not sculp.

If, when connecting parts on the joints, the glue protrudes, it should be immediately wiping with a rag or a damp sponge. The product will be careful and there will be no problems with the quality of the finish finish.

Drill the hole with a drill with a suitable drill for large protracted screws in the corners of a wooden platform. The prepared hole must be done so that the drill is the top flooring and the bed frame bar. Deliver with a hole with a zenker for 1 cm. Apply the glue into place. Glue and screw the screw into the wood, as you can fix it.

Attention! Perform work diligently, but avoid excessive tightening and smoothing wood. The smooth surface of the opening can weaken the mount.

Suspended bed is ready, it remains to perform finishing work And install it in place.

Holes from fasteners and irregularities should be filled with putty. Leave the bed at the time of drying the means.
Scroll to remove the excess putty, remove roughness and burrs on wood. Pay special attention to the end elements - as you will most often come into contact with them when operating the bed.
Cover the product by the Morilka.
Dry surface apply 1-2 layers finish coat. This, at your request, may be paint or varnish.

The last step is the most responsible. Determine the place where you hang the bed. The material should be dense and reliable. Install the mounts, hang the couch on 4 rope or chains. If you are not sure as fasteners - invite a specialist to fulfill this work.

Bed swing for cottage

Summer, warm sun, light breeze is best time Soak outdoors. If there is no possibility to buy a finished bed swing for the street or to build a solid wood, make a pendant product from a pallets. After all, it is practical finished elements wooden bed. In addition, this material will not cost you anything.

Masters and designers offer many ways to make a hanging bed from pallets. We suggest to build the most comfortable and simple.

Materials and tools

Our bed will have a sufficient size for the placement of a full-fledged mattress. This will significantly increase its comfort. Prepare the necessary materials for work:

2-3 wooden pallet.
3 boards parameters 20x40 mm or bar 40x40 mm.
Drill with drills.
Screws.
Pliers.
Emery paper or grinding machine With nozzles of different graininess.
Roulette and pencil.
Durable rope (or cord) capable of withstanding high load.
Metal fittings for fastening.
Mattress with a lightning case.
Putty.

It is very important to choose the pallets to work in good condition, be sure to leave dry wood. Before assembling, wooden blanks should be put in order: remove excess nails, fill the holes with putty. After drying the filler, cast the surface of the pallet.

Work description

Measure the length of the ready mattress to determine what size the hanging bed must be collected.
To cere together with two pallets, use additional 3 boards or 3 pieces of timber. Install them at the bottom of the pallet along the inner edges and the average plank. Use glue and screws. Fold pallets in such a way that the length of the design corresponds to the length of the mattress.
Disconnect the planks from the third pallet and add them to the screws into the middle part of the design, filling the space.
Cut the protruding parts of boards or bars.
Thick drill along the edges of the design prepare through holes.
Through the rope (or cord) through the holes. To the ends, attach the rings for hanging.

At this stage, you can cover the base on the mattress, hang the product on a special device or on a thick branch to enjoy the rest in nature. But if you want to extend the time of using the bed swing, cover the wood by the mourn. This will protect it from the harmful effect of moisture.

To date, the idea of \u200b\u200bcreating a suspension bedroom Used both in the interiors of country houses and in the conditions of urban apartments. Most it is associated with southern landscapes, rest on open air. The bed under the ceiling looks somewhat exotic in the conditions of modern premises. However, such beds have their own characteristics and undoubted advantages.

Of course, this idea will become very creative and suitable for those who are not deprived of courage and originality. After all, it is not so easy to abandon the usual sight of the bed that is firmly standing on the floor. But if you definitely decided to implement this idea, you need to go to the case with all thoroughness.

Characteristics

The most obvious plus such a bed is able to optimize the free square, which can be a salvation for the owners small-sized apartments. The vacant space below, under the bed, can be originally decorated - additional lighting will add your bedroom comfort and romantic charm. And, of course, the cleaning of flooring is much easier.

Create a hanging bed with your own hands - a rather complicated task. By minuses include installation difficulties. If she get tired of you, and you want to go back to traditional optionThere will be a need to eliminate the holes remaining in the ceiling. Move to another place the design either will not succeed.

Fastening

Molding methods differ depending on the shape of the bedroom itself and the ceiling. It can be attached to both the ceiling and the wall. You can also use a combined method. Details of fastening types are better to consider in the photo of hanging beds, depending on your conditions, determine the optimal option.

Choosing ceiling mountIt is necessary to thoroughly calculate the load on the attachments. The static and dynamic load is taken into account. Anchors mounted in the ceiling must be made of durable alloy withstanding an impressive weight. The bed can hang on ropes, cables and even chains - depending on its model and style solution.

If you do not have the ability to hang the bed to the ceiling, you can consolidate its headboard to any wall. It will be as if soaring in the air. For these purposes, you need to choose a suitable model. Such a bed is very changing the bedroom interior.

If you want to achieve more security, it is safer to use the so-called combined mount. This will ensure the fixedness of your design, because it is recommended to apply when installing baby beds.

Bed shape

Suspended bed is a fairly informal solution and requires a certain courage. It is designed to make the interior of your bedroom original and modern. The main question to solve is what form will have your bed.

A special approach needs a special approach to a round suspended bed, its location must be thought out. As for the recommendations of professionals, they advise them to place them on spacious terraces, wide loggias, in large private houses. There it will look most effectively.

The design is attached at one point to the ceiling and additionally - to several points around the bed circumference. Round form It is considered suitable for a short rest during the day. Excellent idea will use the bed for cottages or country house. When using it outdoors, it is better to add a mesh from mosquitoes to protect against insects.

The main and traditional form remains rectangular. It easily pours in almost any bedroom atmosphere. Fasteners are made using four ropes. For greater security, the bed is equipped with sides.

Sometimes there are and square beds of beds, but they are not so comfortable. Nevertheless, it can be an individual solution for a particular interior that helps to perform certain task. The main thing is to take into account that choosing a square shape, you get a wide bed, which will take a lot of free space.

We do with your own hands

If you think you can independently make a bed, our tips can come in handy. First you need to understand what load is able to withstand your ceiling. This will require consultation with specialists.

If you take for the manufacture of beds on your own, it is better if it is rectangular. A robust board is suitable as a base or a cloth from several boards. Unacceptable using chipboard. Also take to work emery paper, paint, drill and metal hooks.

To calculate the length of the rope to which the bed is suspended, it is necessary to multiply from the ceiling of the ceiling itself to two, and then four. To the resulting number, add 4 meters, which will be needed on the nodes. We get the total length of our rope.

Next, it must be divided into four identical parts and cut. Folding in half, we get rows, the bed hangs on them. The boards must be cleaned, polished, after which - to be primed and painted.

The crown drill in each of the four corners of the base is done by the holes for the rope, retreating from the edge of at least 15 centimeters. After that, it is necessary to start to engage in the ceiling, attaching 4 hooks to it. They are fixed on separate attachments or on the frame killy.

Parts of the rope, which were folded in half, threw cropped ends into the holes. We tie the nodes at their ends, and so that they do not disappear, we wrap their joinery glue. Securing all the slings on the ground, go to the next step - hang the bed.

Not to do without assistant. The loop of the rope is thrown on the hooks, after which it is already possible to lay the mattress on the resulting bed and lay a bed.

However, K. independent manufacture This kind of design should be suitable with maximum seriousness. It is not always necessary to take on this job on your own. Although technically it is possible, for the sake of guaranteed security, it is better to trust this work by a specialist.

That suspended bedif it is done high quality and conscience, can please the owners long years. If you have a desire to diversify the interior, and you are not afraid to experiment - safely embody your idea.