Flexible gas supply for Tuboflex. Choose a gas hose for connecting a gas stove or boiler. How to choose the right gas hose

Article No. 4104717

When connected absolutely any gas devices from electrical elements (Electricity, illumination, electric regulation), the main criteria are security, reliability and service life.
Safety - because we are dealing with gas that is explosive substanceMoreover, in combination with electricity.
Reliability - because each material from which the selected eyeliner is manufactured possesses physical properties To exposure external power.
Service life - because each of us is interested and pursues one goal - "put and forgotten." Gas hose Polyvinyl chloride reinforced polyester thread in individual packaging (Euroslot).

Advantages:
- Difficulty
- Dielectric
- withstands the touch of contact with a hot slab
- Low cost when comparable service life
- Resistant to oil fog
- Operated in conditions of increased loads

Gas liner with threaded frame, reinforced. Service life of 12 years.
Podder high pressure For feed compressed air (gas), resistant to the effects of oil fog, is also used for technical water. Operated in conditions of elevated loads.

Gas supplying characteristics:
- inner layer of sleeves: PVC, black
- Braid: PVC, yellow color
- reinforcement of polyester thread
- Operating pressure: 20 bar
- Pressure on the gap: 60 bar (at 25 degrees Celsius)
- Temperature interval: -15 degrees Celsius ... + 90 degrees Celsius
- Inner diameter: 10 mm
- External diameter: 16 mm

Has no analogues from products produced in Russia

In comparison, C. rubber hose The service life is increased by more than 2.5 times. Material is a difficult, dielectric, withstands the touch of contact with a hot stove.

In comparison with the bellows, there is a lower cost with a comparable service life and basic performance. Does not require an additional dielectric insert. Installation of gas hoses is made by specialists of organizations that have a license for the right to produce gas-hazardous work with a mandatory mark in the duty date of installation or service, artist, organization and license number. In case of non-compliance with these conditions, the manufacturer is not responsible for violating the rules of installation and operation.

Article No. 4104949.

When connecting absolutely any gas appliances with electrical elements (electricity, highlighting, electric regulation), the main criteria are security, reliability and service life.
Safety - because we are dealing with gas, which is an explosive substance, especially in combination with electricity.
Reliability - because each material from which the selected eyeliner is manufactured, has its physical properties to the effects of external forces.
Service life - because each of us is interested and pursues one goal - "put and forgotten." Gas hose Polyvinyl chloride reinforced polyester thread in individual packaging (Euroslot).

Advantages:
- Difficulty
- Dielectric
- withstands the touch of contact with a hot slab
- Low cost when comparable service life
- Resistant to oil fog
- Operated in conditions of increased loads

Gas liner with threaded frame, reinforced. Service life of 12 years.
High pressure liner for supplying compressed air (gas), resistant to the effects of oil mist, is also used for technical water. Operated in conditions of elevated loads.

Gas supplying characteristics:
- inner layer of sleeves: PVC, black
- Braid: PVC, Yellow
- reinforcement of polyester thread
- Operating pressure: 20 bar
- Pressure on the gap: 60 bar (at 25 degrees Celsius)
- Temperature interval: -15 degrees Celsius ... + 90 degrees Celsius
- Inner diameter: 10 mm
- Outer diameter: 16 mm

Has no analogues from products produced in Russia

In comparison with the rubber hose, the service life has been increased by more than 2.5 times. Material is a difficult, dielectric, withstands the touch of contact with a hot stove.

In comparison with the bellows, there is a lower cost with a comparable service life and basic performance. Does not require an additional dielectric insert. Installation of gas hoses is made by specialists of organizations that have a license for the right to produce gas-hazardous work with a mandatory mark in the duty date of installation or service, artist, organization and license number. In case of non-compliance with these conditions, the manufacturer is not responsible for violating the rules of installation and operation.

The gas hose seemingly what kind of simpler product may be a mystery? Came to any economic store, took and forth on the cashier. However, you never thought about the difference between the gas hose gas stove and gas hose for?

And the most important thing is that on the shelves of large trading networks such as, Lerua Merlen or Maxid, this product is simply represented in a huge assortment. Injury the question arises: what gas hose is better to buy? On one tray lies gas hose PVC The reinforced polyester thread, on the other, the gas hose of the bellows type, and even lower the rubber sleeve at all and how is it not to get confused?

More recently, literally a couple of dozen years ago, you would not care about how to attach the gas stove. All gas household appliances, after the purchase of "tight" and securely joined us as a rule, the master of their nearest hide with the help of a steel pipe. Of course, about aesthetics or design did not even have thought. There was only one task - rather start using a new device.

Accession steel pipe Correspondingly has several advantages. Such requirements as durability, reliability, security is secured 100%. That's just there is a small inconvenience, wash the gesture under the stove most likely will not get the next twenty years. AND kitchen furniture can't find desired sizeSo it remains 20 centimeters from each side of the slab, but it is not possible to move it. Finally, this kind of problem went into the past, and there is no deficiency for a long time on the domestic economic market, and the flexible gas supply is offered in a large range.

Selecting the gas hose for the stove, or the boiler - a very serious step. From his strength, reliability and safety depend on the lives of many people. Often the result of the illiterate connection of the slab or the gas column to communications becomes an explosion. For flexible appliances natural Gas Exceptionally special, gas hoses are used. Watering use for this purpose is categorically prohibited.

Of course it is better to call the wizard that will provide a professional connection and will give a guarantee. Each of us saw in the news, which leads the explosions of household gas, including as a result of unqualified connections of household gas devices. We have known since childhood that it is impossible to joke with gas. However, the modern gas hose allows you to connect yourself. Adhering to elementary safety rules, a similar procedure is able to perform any adult man.

So, go to the store. Let's see what the seller offers, what flexible gas hose to choose and buy for a gas stove? It is distinguished by three main types of gas hoses used in everyday life:

• - rubberotable;
• - rubber reinforced;
• - Sylphon.

Gas hose rubber.

The milded of all types of hoses - rubber sleeves reinforced by textile thread. They have long won the reputation of an unpretentious compound, and are often found in the farm of the maternity house owner. Simple mounting work, inexpensive cost, flexible properties and functionality of attractive qualities that determine popularity. On the shelves there will always be available options with different length and diameter.

Rubber - one of best Materials dielectrics. They are used to feed household appliances liquefied gas From gas cylinders and are used in cottages and in private houses. This method of flexible gas liner is the easiest and cheap, but also most dangerous.

A large minus is that with time in rubber, cracks are formed, leading to gas leakage. The only place where it is permissible to use this type of flexible lining - gas cylinders in the private sector. Among other things, the products do not get the necessary stiffness.

It is not recommended to use rubber-free sleeves for more than two years, but in practice they are operated much longer.However, modern rubber hoses are manufactured with inclusion in the composition of elasticcomponents which allow you to use the product up to 5 years.

Gas hose reinforced.

Rubber reinforced sleeves are most common, externally resembling hoses for water lining. Outside, they are braided with steel threads. Although they are called rubber, inside they contain polymeric material. Distinguish gas type The hose from the plumbing is easiest to be woven into the outer nut of the threads, they must be yellow.

Hoses in a metal lap inexpensive and easy to use, but some european countries Established a ban on their application. In our country, gas workers are also recommended to gradually refuse them or operate in compliance with precautions.

The plastic hose, which is inside, is exposed to the same destruction and destruction as rubber. Also, steel is a good conductor electric currentSo, the connection must be performed with the mandatory use of dielectric pads.

Stainless steel bellows bellows hose.

Silphon type hoses are the only gas services permitted for household gas appliances. What is the siltphone? This corrugated durable and dense shell, preserving its properties when exposed to temperature, pressure and serious mechanical load.

Silphon takes its name from the English. Corporate Sylphon. It happens one- and multi-layer type, manufactured from both metal and non-metallic materials. The shell serves as a barrier and gives the product enhanced security.

Silphon flexible sleeves are made of of stainless steel. They are two types. The first in a metal fever without isolation, this type is suitable for conventional plates with traditional spiked spiked. If you have a modern gas stove equipped with an electrolozer and has a connection to electrical network, then you should not bother myself searching for dielectric laying.

It is easier to draw your gaze to the second type with a polymer coating of yellow color, which is reliable electrical insulation. This protection for gas stoves equipped with various electrical parts - electric climb, highlighted with electric coolers, is particularly relevant. Polymer coating - It is durable, firmly, reliably and guarantees absolute electrical insulation.

For uniform gas supply, the inner diameter of the hose of at least 10 mm is recommended. The advantages of using bitten hoses are indisputable. Samples with a plastic coating, guaranteeing excellent protection against various cataclysms proven itself particularly well.

Silphon sleeves have a service life of up to 30 years. The only drawback is high, compared with other types of gas hoses, cost, but here as they say, safety is more expensive! Moreover, the increased value in percentage will be negligible, compared with the acquired gas equipment.

Sylphon hose for gas, advantages:

• Gas hose is manufactured in accordance with technical Conditions and satisfies the regulations of the GOST;
• The only authorized government services;
• Component PVC coating provides product reliable protection. The polymers are perfectly opposed to the effects of aggressive media and mechanical shocks.
• Gas supplying is often unharmed, exposed to significant, and sometimes critical loads;
• On the product manufacturers set a long service life, more than 25 years;
• PVC protects against electrical effects in 1000 V and more.
• There are no standards for restrictions during operation.

How to choose the right gas hose

The main advice sounds quite trite: the gas hose without emergency consequences can be bought in any specialized store where you will be given a certificate of compliance with the state pattern. Acting on the question: what gas hose is better than a bellix or rubber, stop your choice in favor of the first. And of course, beware of cheap Chinese fakes or from other countries that do not care about the reputation of the company. On the street market you can find high-quality fakes in which:

Gas hose from very thin rubber to be rapid wear;
- Many fakes in appearance are completely indistinguishable from the present, especially if you are an ordinary buyer, not a professional employee gas service

Do not forget to check the presence of a yellow color on the hose braid, it is she indicating that you have a gas hose in your hands, and not a water supply with a stamped blue-red color. We must buy a gas hose with a "stock", pre-make required measurements And add 20%, this length will be enough.

The manufacturer suggests different lengthsBut the most popular is one-two-meter options. Standard diameters Used in everyday life is 1/2 or 3/4 inches. Gas hose is equipped with two cape nuts with internal thread (American or in common mom-mom). Second type of hose when on one end nut, on another bushing with outdoor thread - "mother, father".

Connecting the gas hose to the stove

After the purchase suitable option Products, with impatience, move to the hose connection to the new plate. Find behind the plates of the fitting as a rule, with an external thread. This is the inlet for supplying gas. Plate manufacturers are equipped with their own products depending on the model direct or angular receiver.

If you got a device with direct entrance, we advise you to purchase a brass angle with internal threads and the restrictive wall into which the parenchite gasket is invested. When installing, avoid harsh hose fluctuations.

Imported plates sometimes go on sale with a thread at an outlet 3/8 or 3/4 inches. There will be no tragedy if you in advance will additionally acquire the usual Futorca adapter on proportionate threads of your gas hose. IN residential buildings Gas riser is usually laid in one of the corners of the kitchen room. In your use, there is a removal, it must be installed on it. gas crane. We will screw up or screwed up our gas hose depending on what carvings are equipped with valve.

IN standard equipment The gas hose goes along with two paronit pads. Do not forget to use them during the connection, so it will be easier for you to achieve the lack of leaks. Advise the same, use the package purchased separately with a shallow mesh, the masters claim that it will help get rid of of different kind Pollution. But this procedure, we leave at your discretion, as usually gas comes without mechanical inclusions.

Gas hose is screwed wrenchBut do not pep and do not squeeze the paronite. After the work performed, it remains to carry out a check of a possible gas leakage. It is enough to apply a soap foam on the connections, the lack of air bubbles says that the work is made with a qualitative and stove you can use. Bon Appetit!

Compliance with the basics of security

• The main requirement of the gas management service - access to the eyeliner, so flexible hose For the gas stove should be within reach;
• It is not allowed to have a third-party connection to the gas stove;
• The gas hose must be kept clean, the embellishment is not allowed, it is impossible to cover its paint, and produce other "improvements" of the appearance;
• The eyeliner must have a natural sagging. The tension is fraught with a cliff of the hose, or a gas leakage in the places of attachment to the fitters;
• If you are planning to move the slab before general cleaning, in advance, calculate the required length of the gas hose. Be sure to start the ball valve before the start of movement;
• Do not allow strong bends and twisting;
• It is necessary to protect the metal braid from condensate;
• Do not expose welding or soldering, use only threaded method docking;
• Provide the replacement of the old gas hose in a timely manner, in accordance with the service life of the installed manufacturer.

We really hope that our review helped to decide and understand which gas hose for the gas stove is better to choose. Now you definitely do not "get lost" in the store, as we learned the species features and differences between gas hoses from each other. An independent connection will also not take much time in the presence of the necessary tools.

However, pay attention to the fact that a number of manufacturers do not allow for similar works by the owner of the technique. One of the requirements, the condition is increasingly becoming a connection of instruments by specialists of the authorized gas service. Otherwise, there is a risk of losing a guarantee. Specify the operating instructions, do you lose warranty obligations on the slab in case independent connection. If not, we wish good luck!

We offer you an entertaining video review, where on 1 channel it is recommended which gas hose is better to use in a home source:

When connecting absolutely any gas appliances with electrical elements (electricity, highlighting, electric regulation), the main criteria are security, reliability and service life.
Safety - because we are dealing with gas, which is an explosive substance, especially in combination with electricity.
Reliability - because each material from which the selected eyeliner is manufactured, has its physical properties to the effects of external forces.
Service life - because each of us is interested and pursues one goal - "put and forgotten." Gas hose Polyvinyl chloride reinforced polyester thread in individual packaging (Euroslot).

Advantages:

- Difficulty
- Dielectric
- withstands the touch of contact with a hot slab
- Low cost when comparable service life
- Resistant to oil fog
- Operated in conditions of increased loads

Gas liner with threaded frame, reinforced. Service life of 12 years.
High pressure liner for supplying compressed air (gas), resistant to the effects of oil mist, is also used for technical water. Operated in conditions of elevated loads.

Gas supplying characteristics:

- inner layer of sleeves: PVC, black
- Braid: PVC, Yellow
- reinforcement of polyester thread
- Operating pressure: 20 bar
- Pressure on the gap: 60 bar (at 25 degrees Celsius)
- Temperature interval: -15 degrees Celsius ... + 90 degrees Celsius
- Inner diameter: 10 mm
- Outer diameter: 16 mm

Has no analogues from products produced in Russia

In comparison with the rubber hose, the service life has been increased by more than 2.5 times. Material is a difficult, dielectric, withstands the touch of contact with a hot stove.

In comparison with the bellows, there is a lower cost with a comparable service life and basic performance. Does not require an additional dielectric insert. Installation of gas hoses is made by specialists of organizations that have a license for the right to produce gas-hazardous work with a mandatory mark in the duty date of installation or service, artist, organization and license number. In case of non-compliance with these conditions, the manufacturer is not responsible for violating the rules of installation and operation.