Valves (valves) Electromagnetic solenoid Danfoss. Danfoss Electromagnetic Valves (Danfoss) Solenoid valve DENMARK

Colenoid valve, with its unusual name, in an ordinary alignment causes different associations. At the very case, this is an ordinary shut-off crane, only improved, instead of its opening it, it turns on automatically through the timer or when you press the switch connected to it. Why nevertheless he is salty.

Electromagnetic valve Danfoss

Electromagnetic (Solenoyad) Valve is an electromechanical device that serves to open and overlap the stream needed to work - liquid or gaseous. It is designed from two components: solenoid (electromagnet) with an iron core and an ordinary valve with a hole, for a flow of liquid or gas, and parts in the form of a disk or piston, for stream constipation. When the power is applied to the power coil, the core under the influence of the formed magnetic field is drawn into the inside, the system opens or closes.

According to structural features, they are divided into normally open or closed. It depends on how the current is supplied to the coil. I wonder what is fine open valveIf the current is supplied to it closes, and a normal closed valve, on the contrary, opens.

One of the manufacturers of such reinforcement is Danfoss. The Danish Concern's Colenoid Valve is successfully used by many enterprises, they serve in the most different industries Industry.

Where the Solenoid Valve Danfoss is applied

The area of \u200b\u200btheir application is very diverse. Valve Danfoss direct action has not large sizes, which makes it use popular in the most different areas Industry. For example, they are installed in liquid and suction lines, equip the hot gas pipelines with fluorine-containing refrigerants.

The Danfoss regulatory valve is used in heat supply, heating and cooling pipelines. It can limit the flow rate of the working medium, locating the passage of the fluid when the flow level approaches the setting, the installed adjusting diaphragm holds the denoted pressure drop.

The material from which is made by the hulls are chosen on the basis of in addition to the industry it will be applied - in aggressive or neutral. Due to special alloying additives, the case materials of the body has high corrosion resistance. Colenoid coils are manufactured by explosion-proof and intrinsically safe, which makes them safe for refrigerants and oils, various fuels or gas.

Therefore, the Danfoss salted valve was widely used in domestic heat and water supply systems, as well as in central air conditioning networks. This is due to the fact that, having an acceptable price, Akin to others, is significantly ahead of them in quality and strength.

Advantages of Valve Danfoss

The Danfoss Solenoidal valve is universal and solves almost any tasks for the flow of fluid and gas flow. Its work does not depend on the pressure drop in the system, having a seal reliable when working with water, air and butter. The mechanism has high level Opening even with zero pressure drop.

Solenoid valve Danfoss gives the best harvesting of hydraulic shocks among the existing competitors. This leads to a decrease in noise and vibration, and also extends the service life of the remaining parts - which ensures the reliability of the system. The advantage of it is a combination price - quality.

This article discloses only the main aspects of this product of Danfoss. Discover complete characteristic and necessary technical information You can contact our company, engaged in selling this product, which is certified by European standards. Therefore, the data of the solemade valves is reliable, over a long service life.

We offer considerable Danfoss valves, best models Which can be found in the GSKM catalog. The valve is an electric shut-off valve. It is used in heating systems And everywhere where there is no possibility of manual feed / disable liquid or gas. We have available valves of the Danfoss Danfoss brand, which can be used in watering, sewage systems, boilers, expansion and washing systems.

Selectsoleneenoid valve, pay attention to the type of attachment, body material, coil resistance. Here you will find valves running in the most different systems, Including zero pressure.

Profitable and reliable acquisition

By purchasing valves in the GSKM company, you get the following benefits:

uninterrupted operation of equipment and durability of operation;
cost savings: the price of any Danfoss is quite acceptable;
quality assurance from the Danish manufacturer;
select valves for any purpose, thanks to a wide range.

Specialists around the world choose Danfoss, and the reliability of the valves always amazes. There is a decrease in emergency risks, and all the equipment is quite accessible and economically in use.

How to order equipment

To bother Danfoss's solenoid valve, select the equipment of interest in the desired quantity, add it to the basket. If you need a brief excursion for the use of valves and selection of equipment - count on a free consultation, for this call us. We promise: ordering and delivery to any point of the Russian Federation will be rapid!

Cases and coilselectromagnetic valves Danfoss. Usually shipped separately, but are collected in place.
The assembly is performed quickly and easily, without the use of tools, than the optimal flexibility of structures and their readiness to work. Replacing the coil is made without stopping and drainageing the system.
On request, electromagnetic valves can also be supplied assembled.

Danfoss EV210A, compact two-position two-way electromagnetic valves of direct action

EV210A - a large group of two-position two-way electromagnetic valves of direct action, which differ in small sizes intended for use in industrial equipment.
Compact design in combination with an extensive set of coils allows the use of EV210A in a wide variety of industrial applications.

· Two-position two-way
· Compact dimensions
· Direct action
· Du 1.2 - 3.5
· From g 1/8 to g 1/4

EV210A Direct-operated 2/2-Way Compact Solenoid Valves	EV210A Valve, Stainless Steel	SOLENOID VALVE EV210A NC - 1.5B G 18F	Solenoid Valve EV210A - 1.2b g 18e
solenoid Valve EV210A - Spareparts	SOLENOID VALVE EV210A 1 2 3 5 SS - 2,5SS G18E	SOLENOID VALVE EV210A WITHOUT COIL	SOLENOID VALVE EV210A NO - 1,5B G14E

Specifications Electromagnetic valves EV-210A

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps
	Normally closed			Direct action











							Stainless steel
							Stainless steel
	Normally open
	Normally open

Danfoss EV220A, Two-Single Two-Wine Solenoid Solenoid Valves

· Two-position two-way
· With servo
· Du 6 - 22
· From g 1/4 "to g 1"
· Brass valve body
· Nz options (normally closed) and but (normally open)
· Threaded connection ISO 228/1 or with NPT thread

EV220A SERVO-OPERATED 2/2-WAY SOLENOID VALVES	EV220A SOLENOID VALVE NC - Normally Closed	SOLENOID VALVE EV220A SPAREPARTS	SOLENOID VALVE EV220A NC - 6B G14N
SOLENOID VALVE EV220A WITHOUT COIL

Specifications of electromagnetic valves EV-220A

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.
	Normally closed			Servo
								1,600







	Normally open



	Normally closed
	Normally open

Danfoss EV220A with filter, two-position two-way electromagnetic valves with servo drive

EV220A Servo-operated 2/2-way Solenoid Valves W / Filter

EV220A - a series of compact two-position two-way electromagnetic valves of indirect action with a servo, specially intended for use in machines and equipment with limited space.
The built-in replaceable filter provides long-term uninterrupted operation even if there are impurities in the working environment.

· Two-position two-way
· With servo
· Built-in shift filter
· DN 11.
· G 1/2 "
· Brass valve body
· NZ (normally closed)

Specifications of EV-220A electromagnetic valves with filter

Danfoss EV310A, compact three-position two-way electromagnetic valves of direct action

EV310A is a large group of small two-position three-way electromagnetic valves for direct action intended for use in industrial equipment, for example, as control valves.

· Three-position two-way
· Direct action
· Dn 1.2 - DN 3.5
· From g 1/8 "to g 1/4"
· Brass valve housing or of stainless steel

EV310A Direct-operated 3/2-Way Compact Solenoid Valves

EV310A Direct-operated 3/2-Way Compact Solenoid Valves Worthout Coil

Specifications of electromagnetic valves EV-310A

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.
	Normally closed			Direct action




	Normally open

Danfoss EV210B, Two-Source Double Solenoid Solenoid Valves

EV210B - a large group of two-position two-way electromagnetic valves for direct action for universal use. EV210B - a series of extremely reliable valves with high operational characteristicswhich can be used in harsh operating conditions.

· Two-position two-way
· Series with improved performance
· Direct action
· Du 1.5 - 25
· Brass or stainless steel valve body
· Nz options (normally closed) and but (normally open)
· ISO 228/1 from G 1/8 "to G 1"
· Option included in the list of UL, with NPT thread (EVI)

EV210B DIRECT-OPERATED 2/2-WAY SOLENOID VALVES	Solenoid Valve EV210B 3B NO BB Clipon - 3B G 14e	SOLENOID VALVE EV210B SS WITHOUT COIL	Solenoid Valve EV210B 1 5 4 5 SS - 1.5SS G 18e
	SOLENOID VALVE EV210B NC - 3B G 14E	SOLENOID VALVE EV210B - 3B G 14F	Solenoid Valve EV210B - by Coil
SOLENOID VALVE EV210B - 25 B G 1E	SOLENOID VALVE EV210B - 6B G 14E	SOLENOID VALVE EV210B - 2 B G 18N	Solenoid Valve EV210B - 1.5B G 18e
Solenoid Valve EV210B - 3 B G 14N	Solenoid Valve EV210B - Spareparts	Solenoid Valve EV210B - 1.5 SS G 18N	Solenoid Valve EV210B SS BB Clipon - 3ss G 18e
SOLENOID VALVE EV210B WITHOUT COIL	Solenoid Valve EV210B - 8B G 38E

Specifications of electromagnetic valves EV-210B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.	Voltage coil
	Normally closed			Direct action					-
									-
									-

									-
									-

									-
									-

									-

									-

									-
	Normally open								-
									-
									-
	Normally closed						Stainless steel		-


									-

									-
									-
									-
									-
									-

Danfoss EV220B (Series 6-22), Two-Source Double Solenoid Soleberry Valves

EV220B 6-22 is a group of two-position two-way electromagnetic valves with a servo drive with a threaded connection from 1/4 "to 1".
This group is intended, in particular, for manufacturers of serial equipment, requiring strength with moderate flow values.

· Two-position two-way
· With servo
· Du 6 - 22
· Brass or brass valve housing, resistant to selective corrosion
· Nz options (normally closed) and but (normally open)
· Threaded connection in accordance with ISO 228/1 or with NPT thread (EVSI and EVSI-U)

EV220B (6-22 Series) SERVO-OPERATED 2/2-WAY SOLENOID VALVES	Solenoid Valve EV220B 6-22 BYCOIL - BY240CS	Solenoid Valve EV220B- 10B G 12E	SOLENOID VALVE EV220B NO - GP208 / 240J
SOLENOID VALVE EV220B 6-22 10B	SOLENOID VALVE EV220B -22 NC NPT	SOLENOID VALVE EV220B - 12B G 12N	SOLENOID VALVE EV220B 6-10 NO

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.	Voltage coil
	Normally closed			Servo					-
	Normally closed								-
	Normally open								-
	Normally open								-
	Normally closed								-
									-
									-
									-
	Normally open								-
	Normally closed								-
									-
									-
									-
									-
									-
									-
									-
									-
									-
							Brass, resistant to selective corrosion		-
							Brass, resistant to selective corrosion		-

Danfoss EV220B (Series 15-50), Two-Source Two-Wine Solenoid Solenoid Valves

EV220B (15-50 Series) Servo-operated 2/2-way Solenoid Valves

EV220B 15-50 is a group of universal two-position two-way electromagnetic valves of indirect action with a servo.
The valve body made of ordinary brass, from brass, resistant to selective corrosion or stainless steel, provides the ability to use in a wide variety of areas.
Built-in control circuit filter, adjustable closing time and protection class to IP67 provide optimal performance characteristics even in critical conditions.

· Two-position two-way
· With servo
· DN 15 - DN 50
· The body of a brass valve is proposed, from brass, resistant to selective corrosion
· NH and but options
· Threaded connection in accordance with ISO 228/1 or NPT (EVSI and EVSI-U)

· With hydraulic impact protection
· A variant with adjustable closure time is proposed.

Specifications of electromagnetic valves EV-220B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.	Voltage coil
	Normally closed			Servo
									230 VC. Tok.


									230 VC. Tok.

									230 VC. Tok.

									230 VC. Tok.

									230 VC. Tok.

									230 VC. Tok.
							Brass, resistant to selective corrosion		-
									-
									-
									-
									-
									-
	Normally open								-
	Normally open								-
	Normally closed								-
	Normally closed								-
	Normally open								-
	Normally open								-
	Normally closed								-
	Normally closed								-
	Normally open								-
	Normally open								-
	Normally closed								-
									-
									-
									-
									-
	Normally open								-
	Normally open								-
	Normally closed								-
	Normally closed								-
	Normally open								-
	Normally open								-
	Normally closed								-
									-
									-
									-
									-
									-
									-
									-
									-
	Normally open						Stainless steel		-
									-
									-
									-
	Normally closed								-
									-
									-
									-
									-
									-
									-
									-

Danfoss EV220B (Series 65-100), Two-Source Double Solenoid Solenoid Valves

EV220B (65-100 Series) SERVO-OPERATED 2/2-WAY SOLENOID VALVES

EV220B 65-100 is a group of two-position two-way electromagnetic valves intended for use in powerful industrial installations with high flow values. Features of such a valve - cast iron case and flange connection.
The design, protected from hydraulic impact, and the built-in control circuit filter provides reliable operation For a long period.

· Two-position two-way
· With servo
· Du 65 - 100
· Cast iron valve body
· Flange connection
· Operating pressure up to 10 bar
· Max. Working Environment: 90 ° C

Specifications of electromagnetic valves EV-220B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.
	Normally closed	Welded flange 2 1/2 inches		Servo
		Weld 3 inches flange
		Welded flange 2 1/2 inches
		Weld 3 inches flange
		Weld 3 inches flange

Danfoss EV222B, two-position two-way electromagnetic valves with servo and insulating membrane

EV222B SOLENO-OPERATED 2/2-WAY SOLENOID VALVES WITH ISOLATING DIAPHRAGM

EV222B is a group of electromagnetic valves of indirect effects with a servo, intended for use with contaminated or aggressive media.
Made of stainless steel The valve body, an insulating membrane that protects the electromagnetic system from dirt, the built-in control circuit filter, adjustable closing time, as well as the protection class to IP67 provide reliable and successful operation.

· Two-position two-way
· With servo
· Isolating membrane
· DN 15 - DN 50

· Only normally closed option

Specifications of electromagnetic valves EV-222B

Danfoss EV224B, two-position two-way electromagnetic valves for high pressure servo

EV224B SOLENOIDED 2/2-WAY SOLENOID VALVES FOR HIGH PRESSURE

EV224B - two-position two-way electromagnetic valve high pressure, indirect action, with a servo, is intended for use at operating pressure up to 40 bar and the temperature of the working medium to 60 ° C; It is proposed in normally closed and normally open. Vintage:
The built-in Control Control Filter, adjustable closing time, as well as the protection class to IP67 (depending on the coil) provide reliable and successful operation.

· For high pressure pneumatic systems (up to 40 bar);
· Two-position two-way, with a servo
· Du 15 - 20
· NH and but options
· Brass valve body
· Built-in filter to protect the pilot system
· Based on Verified technology EV220B

Specifications of electromagnetic valves EV-224B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.
	Normally closed			Servo
	Normally open
	Normally closed
	Normally open
	Normally closed

Danfoss EV250B, two-position two-way electromagnetic valves with forced lifting

The EV250B valve with a forced lift can operate when the pressure drops from zero to 10 bar. This group of two-position double valves is intended mainly for use in closed circuits with a small pressure drop with average flow values. The valve body made of brass, resistant to selective corrosion, provides long term Services even when working in aggressive steam environments.
The EV250B valve is compatible with the extensive series of Danfoss coils with an IP00 protection class to IP67. The temperature of the working medium is up to 140 ° C (low pressure pairs).

· Two-position two-way
· Management with forced lifting
· Dn 10 - DN 22

· NC (normally closed) and no (normally open)
· From zero pressure drop
· Particularly suitable for closed contours, as well as for draining systems of tanks
· On request comes with permissions WRAS, VA and UL
· Threaded connections in accordance with ISO or with normal pipe thread

EV250B Assisted Lift Operated 2/2-Way Solenoid Valves	Assisted Lidt Operated Solenoid Valves, Type EV250B NO (Normally Open)	Assisted Lift Operated Solenoid Valves, Type EV250B NO 3/8 with Coil	Assisted Lift Operated Solenoid Valves, Type EV250B NO 3/4 With Coil
Assisted Lift Operated Solenoid Valves, Type EV250B NC With Coil	Assisted Lift Operated Solenoid Valves, Type EV250B NC	Assisted Lift Operated Solenoid Valves, Type EV250B NO

Specifications of electromagnetic valves EV-250B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.	Voltage coil
	Normally closed			Forced ascent			Brass, resistant to selective corrosion		230 VC. Tok.







									230 VC. Tok.
									-
									-
									-
									-
									-
									-
									-
									-
	Normally open								-
									-
									-

Danfoss EV260B, two-way proportional electromagnetic valves with servo

EV260B SERVO-OPERATED 2-WAY PROPORTIONAL SOLENOID VALVES

EV260B is a proportional (with a smooth characteristic) of two-way electromagnetic valves with a servo drive, with a threaded connection from 1/4 "to 3/4".
By smooth control of the current, the coil anchor can be moved to any position in an anchor tube, while the valve is translated into any state, from fully closed to fully open.
When the reel current reaches the maximum value, the valve is completely open.

· Proportional (with a smooth characteristic)
· For smooth flow regulation
· Two-way
· With servo
· Du 6 - 20
· Small time constant
· Linear characteristic in the entire regulation range
· Closes in case of power stop (fault tolerance)
· IP67 coil protection class
· 24 V DC Power Voltage

Specifications of electromagnetic valves EV-260B

Danfoss EV310B, three-way two-position electromagnetic valves of direct action

EV310B is a large group of three-position two-way electromagnetic valves for universal use.
EV310B is a series of very durable valves with high performance characteristics that can be used in the hard working conditions of any type.

· Three-position two-way
· Direct action
· Dn 1.5 - DN 3.5
· Brass valve body
· Threaded (from G 1/8 "to G 3/8") or flange (32x32 mm) compounds
· NC Options (Normally Closed) and No (Open Open)
· Options C. manual control Bypass automatics

EV310B DIRECT-OPERATED 3/2-WAY SOLENOID VALVES

EV310B-WITHOUT-COIL

Specifications of electromagnetic valves EV-310B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.
	Normally closed			Direct action






		Flange 32 mm
	Normally open

Danfoss EV215B, two-position two-way electromagnetic valves of direct action, for steam

EV215B is a two-position dual-step electromagnetic valve, intended for use in the applications associated with steam.
The design is based on the use of a conventional Danfoss concept for direct valves with improved operational characteristics, but the valve plate is made of fluoroplast, which ensures reliable operation even when working with contaminated steam.
The valve body made of stainless steel provides a long service life even when working in aggressive steam environments.

· Two-position two-way

· Direct action
· Du 3.
· G 1/4 "
· Stainless steel valve body
· Only NZ option
· Threaded connection for ISO 228/1 or with normal pipe thread (EVSIS 3)

EV215B Direct-Operated 2/2-Way Solenoid Valves for Steam

SOLENOID VALVE EV215B SS WITHOUT COIL

Solenoid Valve EV215B NC NPT

Specifications of electromagnetic valves EV-215B

Danfoss EV225B, two-way two-way electromagnetic valves for steam

EV225B SOLENODED 2/2-WAY SOLENOID VALVES FOR STEAM

EV225B is a two-position two-way electromagnetic valve with a servo, intended for use in the applications associated with steam.
Its design is based on the use of fluoroplast membrane, providing reliable operation even when working with contaminated steam.
The body of the brass valve, resistant to selective corrosion, and valve seats made of stainless steel provide a long service life even in aggressive steam environments.

· Two-position two-way
· Specially designed for steam installations
· With servo
· DN 6 - DN 25
· From g 1/4 "to g 1"
· Brass valve housing, resistant to selective corrosion
· NC (normally closed)
· Option included in ISO 228/1 or UL lists, with NPT thread (EVSIS)

Specifications of electromagnetic valves EV-225B

Code for order		Compound	Hole size	Exploitation	Mat. Seals	Pressure drop [bar]	Mat. Corps	Kv. m3 / C.	Voltage coil
	Normally closed			Servo	fluoroplast		Brass, resistant to selective corrosion		230 V Pokoka
									230 V Pokoka
									230 V Pokoka


									230 V Pokoka


									230 V Pokoka

									230 V Pokoka

Valves (valves) Electromagnetic solenoid Danfoss

In our company you can buy valves (valves) Solenoid Danfoss from Denmark. Danfoss has plants around the world, including in Russia, so the delivery to the end user takes place in the highest possible time. The quality of valve performance is paid to high attention. Certification of solenoid valves on European standards makes their operation reliable, during the entire service life. Thanks to special alloying additives and the newest materials Valve housing is provided by high corrosion resistance. Installation of explosion-proof and intrinsically safe solenoid coils on electromagnetic valves (valves) makes them use safe for refrigerants, oils, fuel or gas. In the fuel and water electric valves, Danfoss can use special electromagnetic coils with different levels protection and minimum power consumption.

Production of Danfoss (Denmark)
The goods are certified. Warranty 1 year

Catalog of electromagnetic valves Danfoss - Download \u003e\u003e

Valve (valve) Electromagnetic solenoid EV220B

For water, air, oil;
Case: Brass; Membrane: NBR, on request EPDM;
Operating temperature: -10 ... +90 o C;

vendor code

DN.,

Thread,

inches

K V.,

m 3 / h

∆ P min ,

Valve (valve) Electromagnetic solenoid EV250B

Span. "NZ" is closed, in the absence of current; Span. "But" on request;
With a membrane of forced lifting, direct action;
For air, water and low (up to 4 bar) pressure;
Case: corrosion-resistant brass; Membrane: EPDM;
Operating temperature: -30 ... +140 o C;
Montage by internal thread;
Coil: 220 B, 50 Hz, 10 W, complete with plug.

DANFOSS EV250B Valve Specifications

vendor code

DN.,

Thread,

inches

K V.,

m 3 / h

∆ P min ,

When ordering the coils on 24 V, 50 Hz in the code number, the last two digits "31" should be replaced by "16" or "02" for DC 24 coils in DC.

Valve (valve) Electromagnetic solenoid EV225B

Span. "NZ" is closed, in the absence of current;
For air, cold, hot water and steam;
Case: Corrosion-resistant brass, resistant to zinc washing;
Seals: Membrane - PTFE, Saddle - Stainless Steel;
Operating temperature: -10 ... +185 o C;
Installation on internal thread;
Coil: 220 B, 50 Hz, 10 W complete with plug.

TECHNICAL SPECIFICATIONS OF DANFOSS EV225B Valve

vendor code

DN.,

Thread,

inches

K V.,

m 3 / h

∆ P min ,

Span. "NZ" is closed, in the absence of current;
With protection from the hydroudar and the filter of the pilot channel;

Installation on internal thread;

DANFOSS EV220B Valve Specifications

vendor code

DN.,

Thread,

inches

K V.,

m 3 / h

∆ P min ,

* Under the order for neutral liquids with Tmax \u003d 90 o C, with a coil of DC 12 V.

Valve (valve) Electromagnetic solenoid EV220B

Span. "But" - open, in the absence of current;
With protection from the hydroudar and the filter of the pilot channel;
For water, air and other non-aggressive liquids and gases;
Case: Brass; Membrane: EPDM; on request NBR;
Operating temperature: -30 ... +120 o C;
Installation on internal thread;
Without coil. Coils and plugs must be ordered separately.

DANFOSS EV220B Valve Specifications

vendor code	DN.,	Thread, inches	K V., m 3 / h	∆ P min ,





					Electromagnetic coils and plugs Important!The value of ΔPmin is the minimum pressure drop (the pressure difference at the input and output) required to trigger the valve to open or closure. For EV250B, the pressure drop is not required, triggering at zero pressure! KV value is conditional bandwidth at 1 bar. The actual fluid flow through the valve is calculated by the formula, see Background \u003e\u003e \u003e\u003e Sale of valves is carried out as a kit - electromagnetic valve along with the coil and separately. High unification of components, coils and spare parts makes it possible to reduce the delivery time of the equipment and select the optimal kit. Also in our company you can buy a timer - time relay, for valve operation in automatic mode. This page presents only the main types of Danfoss electromagnetic valves. Get the full price of Danfoss 2010 and additional technical information you can, contacting the managers of our company.

The hulls and coils of the Danfoss electromagnetic valves are usually shipped separately, and they are collected in place.

The assembly is performed quickly and easily, without the use of tools, than the optimal flexibility of structures and their readiness to work. Replacing the coil is made without stopping and drainageing the system.

On request, electromagnetic valves can also be supplied assembled.

Danfoss has developed an attractive EV251B valve for solving almost any fluid flow management tasks in industry. More than 90% of applications you get additional advantagesUsing the valves of the EV251B series.

The selection of the valve is extremely simple: you need to know only the size of the pipe and supply voltage. The valve will provide impeccable work regardless of the presence of a pressure drop in the system.

EV251B provides the best damping of hydraulic shocks among all competitors. This gives not only a decrease in noise and vibration, but also an increase in the service life of the rest of the components is what is needed for the reliability of the system.

The EV251B valves are supplied assembly with a coil and a plug and seals of the NBR type, which are suitable for water, air and oils.

Main advantages:

High performance and damping of hydrowards
Attractive price
High versatility of application, including for:
- heating systems
- systems with closed contour
- systems where liquid goes "Self" (plums of tanks)
- leakage protection systems
- low vacuum systems
High degree of discovery at zero pressure drop
Low maintenance costs thanks to the design that impedes pollution
Convenient system for installing coils with a latch for simplicity of assembly and high vibration resistance

(Order)

EV210A - a large group of two-position two-way electromagnetic valves of direct action, characterized by small sizes intended for use in industrial equipment. Compact design in combination with an extensive set of coils allows the use of EV210A in a wide variety of industrial applications.

Two-proprietary two-way
Compact sizes
Direct action
DU 1.2 - 3.5
From g 1/8 to g 1/4

(Order)

EV220A - a series of compact two-position two-way electromagnetic valves of indirect action with a servo, specially intended for use in machines and equipment with limited space.

Two-proprietary two-way
With servo drive
DU 6 - 22
From g 1/4 "to g 1"
Brass valve body
NZ options (normally closed) and but (Open)
Threaded connection for ISO 228/1 or with NPT thread

(Order)

EV220A - a series of compact two-position two-way electromagnetic valves of indirect action with a servo, specially intended for use in machines and equipment with limited space. The built-in replaceable filter provides long-term uninterrupted operation even if there are impurities in the working environment.

Two-proprietary two-way
With servo drive
Built-in replaceable filter
DN 11.
G 1/2 "
Brass valve body
NZ (normally closed)

(Order)

EV310A is a large group of small two-position three-way electromagnetic valves for direct action intended for use in industrial equipment, for example, as control valves.

Three-position two-way
Direct action
DN 1.2 - DN 2
From g 1/8 "to g 1/4"
Brass or Stainless Steel Valve Case
NC Options (Normally Closed) and NO (Open Open)

(Order)

EV210B is a large group of two-position two-way electromagnetic valves for universal use. EV210B - A series of extremely reliable valves with high performance characteristics that can be used in harsh operating conditions.

Two-proprietary two-way
Series with improved performance
Direct action
Do 1.5 - 25
Brass or Stainless Steel Valve Case
NZ options (normally closed) and but (Open)
ISO 228/1 from g 1/8 "to g 1"
Option included in the list of UL, with NPT thread (EVI)

(Order)

EV220B 6-22 is a group of two-position two-way electromagnetic valves with a servo drive with a threaded connection from 1/4 "to 1". This group is intended, in particular, for manufacturers of serial equipment, requiring strength with moderate flow values.

Two-proprietary two-way
With servo drive
DU 6 - 22
Brass or brass valve body, resistant to selective corrosion
NZ options (normally closed) and but (Open)
Threaded connection in accordance with ISO 228/1 or with NPT thread (EVSI and EVSI-U)

(Order)

EV220B 15-50 is a group of universal two-position two-way electromagnetic valves of indirect action with a servo. The valve body made of ordinary brass, from brass, resistant to selective corrosion or stainless steel, provides the ability to use in a wide variety of areas. Built-in control circuit filter, adjustable closing time and protection class to IP67 provide optimal performance characteristics even in critical conditions.

Two-proprietary two-way
With servo drive
DN 15 - DN 50
The body of the brass valve is proposed, from brass, resistant to selective corrosion
NZ and but options
Threaded connection in accordance with ISO 228/1 or NPT (EVSI and EVSI-U)
With protection against hydraulic impact
A variant with adjustable closure time is proposed.

(Order)

EV220B 65-100 is a group of two-position two-way electromagnetic valves intended for use in powerful industrial installations with high flow values. Features of such a valve - cast iron case and flange compound. The design, protected from the hydraulic impact, and the built-in filter control circuit ensure reliable operation for a long period.

Two-proprietary two-way
With servo drive
Do 65 - 100
Cast iron valve
Flange connection
Operating pressure up to 10 bar
Max. Working Environment: 90 ° C

(Order)

EV222B is a group of electromagnetic valves of indirect effects with a servo, intended for use with contaminated or aggressive media. Made of stainless steel The valve body, an insulating membrane that protects the electromagnetic system from dirt, the built-in control circuit filter, adjustable closing time, as well as the protection class to IP67 provide reliable and successful operation.

Two-proprietary two-way
With servo drive
isolating membrane
DN 15 - DN 50
Only normally closed option

(Order)

EV224B - a two-position two-way electromagnetic valve of high pressure, indirect action, with a servo, is designed for use at operating pressure to 40 bar and the temperature of the working medium to 60 ° C; It is proposed in normally closed and normally open. Vintage: Included in the Standard Supplies Integrated Control Filter, adjustable closing time, as well as security class to IP67 (depending on the coil) provide reliable and successful operation.

For high pressure pneumatic systems (up to 40 bar);
Two-position two-way, with a servo
DU 15 - 25
NZ and but options
Brass valve body
Built-in filter to protect the pilot system
Based on Verified Technology EV220B

(Order)

The EV250B valve with a forced lift can operate when the pressure drops from zero to 10 bar. This group of two-position double valves is intended mainly for use in closed circuits with a small pressure drop with average flow values. The valve housing made from brass, resistant to selective corrosion, provides a long service life even when working in aggressive steam environments. The EV250B valve is compatible with the extensive series of Danfoss coils with an IP00 protection class to IP67. The temperature of the working medium is up to 140 ° C (low pressure pairs).

Two-proprietary two-way
control with forced lifting
DN 10 - DN 22
NC (normally closed) and no (normally open)
From zero pressure drop
Especially suitable for closed contours, as well as for draining systems of tanks
On request comes with WRAS, VA and UL permissions
threaded compounds in accordance with ISO or with normal pipe thread

(Order)

The combination type EV251B solenoid valve is equipped with a compulsory opening system and is excellent for closed and open systems with low or unstable pressure, where there is practically no pressure drop. EV251B type valves are supplied with a coil and plug.

For water, air, oils and other neutral media
Bandwidth (KV) up to 5 m3 / h
Pressure drop to 10 bar
Environmental viscosity up to 50 SST
Temperature ambient up to 80 OS
The temperature of the work environment is 10 to 90 OS
IP 65 Coil Protection Class
Attachment: External thread from G3 / 8 to G1

(Order)

EV260B is a proportional (with a smooth characteristic) of two-way electromagnetic valves with a servo drive, with a threaded connection from 1/4 "to 3/4". By smooth control of the current, the coil anchor can be moved to any position in an anchor tube, while the valve is translated into any state, from fully closed to fully open. When the reel current reaches the maximum value, the valve is completely open.

Proportional (with a smooth characteristic)
For smooth flow regulation
Two-way
With servo drive
DU 6 - 20
Small time constant
Linear characteristic in the entire regulation range
Closes in case of termination of power (fault tolerance)

EV215B is a two-position dual-step electromagnetic valve, intended for use in the applications associated with steam. The design is based on the use of a conventional Danfoss concept for direct valves with improved operational characteristics, but the valve plate is made of fluoroplast, which ensures reliable operation even when working with contaminated steam. The valve body made of stainless steel provides a long service life even when working in aggressive steam environments.

Two-proprietary two-way
Direct action
G 1/4 "
Stainless Steel Valve Case
Only NZ option
Threaded Connection for ISO 228/1 or with Normal Pipe Thread (EVSIS 3)

(Order)

EV225B is a two-position two-way electromagnetic valve with a servo, intended for use in the applications associated with steam. Its design is based on the use of fluoroplast membrane, providing reliable operation even when working with contaminated steam. The body of the brass valve, resistant to selective corrosion, and valve seats made of stainless steel provide a long service life even in aggressive steam environments.

Two-proprietary two-way
Specially designed for steam installations
With servo drive
DN 6 - DN 25
From g 1/4 "to g 1"
Valve body from brass, resistant to selective corrosion
NC (normally closed)
An option included in the ISO 228/1 or UL lists, with NPT thread (EVSIS)

(Order)