Registration of wedding bottles with ribbons. Bottles decoration with your own hands: Ideas for creativity

It is necessary to show some resources and zeal, and glass vessel will be original gift or an interior accessory. Bottles decoration with their own hands - a separate topic for homemade creativity and space for the materialization of fantasy.

There are many decoring methods, but among them there are adapted technicians who have become a classic genre. One of them is the art of decoupage. Depending on the purpose, the ordinary glass is permissible to arrange according to the idea of \u200b\u200bthe event. For the marriage ceremony, a colorful design with white pigeons, rings or kissing a couple, will have to be. Make a decoration of wedding bottles with your own hands is easy if you adhere to step-by-step technology.

Clean the surface from the factory sticker. To do this, you will have to lower the container with the content in the water and wait for half an hour to remove the label without effort. Finally remove glue residues will help White Spirit. Degrease the glass acetone for perfect clutch.

It is not necessary to primitive surface, but the perception of the composition depends on the expression of the background. Therefore, a sponge or brush consistently applied acrylic paint into several layers.

Making thematic blanks. The perfect option is to use three-layer decoupage wipes. Only the upper layer is useful. Fragments cut out of paper will also rise to decorate.

Tip: If the applique is too thick - we apply acrylic varnish in several layers, and the dried picture is soaked for 5-10 minutes in water. Now, from the wrong side, we carefully separate the unnecessary volume and we glue the illustration.

Muffd up PVE glue drawings. The motives are permissible to place in a wide part or distribute in a circle. After drying, they are repeatedly covered with varnish. The decoration of bottles does not look closely, if you ignore the inner side of the vessel. Let's try to post the pattern with threads. Scheme is simple:
In the water, threads are soaked long at 15-20 cm, then dip in glue. With the help of the marker, the pattern is drawn, and the toothpick is in response for its artistic performance.

Alternative solution: Let's squeeze with a syringe to putty. It may be mugs or other geometric shapes. Abstractions can be painted with manicure varnish or do the overall protection.

Watch the neck of tape and spray white paint. Then we apply a PVA and fry the semolina vessel. We give the particles to dry. We add a plot pattern from above and all cover with varnish. Ground colored shallow shadows form shadows, and a small crumb fixes the re-lacquer film. We repeat the process 2 times with an interval of 3 hours.

Egg craklers

Egg cracker - separate chapter in decoupage. Abundantly distribute glue through smooth glass, and literally climb the shell in the frozen weight. The basis of fragile puzzles is ready. To make the decoration of wedding bottles with their own hands, it is elegant, apply acrylic paint or motive according to decapiguble techniques to the raised fragments. Combine textures and feel free to experiment with bright stains. For example, add the bronze pigment into white and make the neck and the bottom in one tone.

Decoration of bottles of a cloth

The decoration of bottles to the wedding is impossible to imagine without color satin strips, threads and cords of different diameters. A little patience and a unique design will surprise with a luxurious view. To get the Eastern Decor, take threads with glitter, gold braid and beads. Tie the first loop on the neck or the bottom, we apply a transparent glue to the vessel, let him dry and get it with threads.

Easternally will look like a decor in an ethnic concept. Thick linen threads and a rough tape are suitable. We take an elastic bandage and unevenly wrap it on dark glass in order to obtain a "striped" effect. The dried fabric boosts, and will become an excellent background for glued with dried flowers. When operating sewing threads, a thinly melted basic basis.

Tip! The thickness of the adhesive primer must correspond to the diameter of the rope.

Bottle decoration with ribbons

Bottle decoration with ribbons begins with a choice of champagne with a golden sticker.

Apply the satin blue fragment to the vessel neck and measure the length according to the diameter. We are applied with glue and loosely close the strip shiny foil on the glass. At this stage, you will have to try to eliminate the uneven distribution of the tissue.

Cut a second segment, a noticeable superior initial length parameter. We repeat the action similar to the previous one. The initial attachment points must match. In the same order alternately stick 2 subsequent strips.

Now we approached the middle. Here we need a gold fabric (brocade). The principle is the same: meat and fastened to the glass 2 rows.

Near the bottom, you should also lock the accent strip. We continue to decorate bottles with your own hands with a blue ribbon. Her glue the book so that the connecting seam was from the back. Duplicate the process for 6-7 fabric fragments.

After the end of the decor, the unesthetical seam rushes into the eyes. The stationery knife is formed by a gap, where uneven ends are encouraged with an additional applied composition.

We translate the view of the middle of the bottle - left unclosed segments. We will correct the shortcomings with a brilliant cut from the brocade. It remains to add lace, beads and fantasy.

Clothes for champagne

Decoration of wedding bottles with their own hands will continue to describe the construction of "Pekal" for the dress:
prepare a silver tape for the top of the outfit. Wrap champagne closer to a narrow part of the vessel. The idea requires 2 dense loopson a slightly washed glass, mastocks are attaching a pink ribbon and pay the circumference to the middle. From a brilliant cord on the satin ribbon, we stick the belt, leaving several centimeters at discretion for the future bow.

The upper part is winding up with solid smooth stripes to the border with the braid.

Now do a skirt. We collect the ribbon with a needle and thread tightly tighten. Usually grabs one and a half meters so that it turns out a lush bell. The assembly is attached or glued from the "waist" to the base. We have a cord in this place, which is hidden by the "belt". Then we will cover from the free ends of the bow. At the request of the "bodice" dresses are decorated with rhinestones. Red hearts lined with stones will support the idea of \u200b\u200bthe event and decorating bottles with ribbons will contribute to the creation of an appropriate entourage.

Noticed that for a solemn event there is not enough hats? Let us turn to the plastic bottle for the basis for the headmade:from it we cut the circle. Inside the sphere, we perform another hole required for attaching a hat from above. The principle of this: Measure the diameter of the neck and on the pattern, we mark the desired dimensions. As a result, we obtain a configuration like a bagel with a hole.

We transfer shape on cardboard and duplicate the layout. We remember that the velocked windows should coincide;

The stapler is sealing cardboard to plastic. How to continue the topic of decorating bottles for a wedding, namely hats, solve you. An excellent visual effect gives a tandem of shiny ribbons with lace;

Two in one: champagne with candy

We will prepare 2 orange and 1 green sheets of paper quiet (cigarette). It is used for packaging, so it is possible to find it in flower shops and in the packaging department of gifts.

Sometimes the most ordinary household things literally in a couple of hours can be turned into a real highlight for home interior or an exclusive gift for colleagues and close people. One of these ideas is a decor of bottles. From one of the most ordinary glass bottle, you can make many completely different in style, texture and functionality of products.
We already have an article about. Today we suggest to consider a few more not less interesting ways Decor.

You can work with both empty bottles and still unreacted. An empty bottle after decoration can serve as an excellent addition to the interiors of any room in the apartment or become original vase For a living or artificial bouquet. Full bottles are most often decorated in order to present them as a gift.

In addition to glass bottles, you can use plastic. By the way, all of the methods listed below are suitable for decorating cans and in general any containers that will be at hand.

Decor bottles with twine, threads and cloth

Before starting the bottle, you need to prepare. If you decide to decorate an empty bottle, thoroughly rinse it with a dish and well dry from the inside and outside. If the bottle is clogged, it remains only to remove the label with outside And wipe the surface.

Materials:

• bottles;
• jute twine or colored threads;
• lace, decorative laces, fabric, braid;
• beads, buttons, flowers or other decorations;
• scissors;
• adhesive gun and plow glue.

Progress:

The main task in decorating bottles with jute twine or yarn is to hide threads so that they lay exactly relative to each other in one layer, and at the same time there would be no gaps between adjacent turns.
For this, the surface of the bottle is labeled with glue (can not be applied to the entire bottle, and make a "glue" strips from the neck to the bottom at a distance of 2-3 cm each other). After applying glue, we begin to wind threads. It is advisable to do it enough until the glue is frozen.

After the entire surface of the bottle is already tightly wrapped, you can start the decorations. These can be beads, pattern of buttons, flowers from fabric or crocheted etc.

Natural twine looks great in combination with wildflowers. Put the bells, cornflowers or chamomile in a new Vase and your room will immediately be filled with freshness and summer aroma.

Bottles, decorated according to this technique, are well suited for completing country or provence style.

You can not wrap a bottle to the top. Complete the decor from the twine with others by texture items. For example, a classic combination of twine with delicate lace looks very beautiful.

Recall that you have somewhere a piece of cargo. After all, it is also a wonderful way to decorate empty bottles. Such a decor carries warmth and comfort, because since ancient times, natural fabrics were used by our grandmothers in everyday life. Add bows artificial flowersAnd you will have a very gentle and original product.

Do not forget to knit your ability. These skills will also be very by the way if you need to decorate the bottle.

Using lace ribbons or fabric, create a "shirt" for a bottle can be without twine. These elements are very beautiful and themselves. Gently glue the jewelry with a hot pistol. Such bottles will become an excellent addition to the interiors in style.

Against the background of thick threads, artificial flowers or bunches of grapes are very elegant.

Decorating bottles of paints

As in the first case, the bottle may not be empty.

Materials:

• glass bottle of any shape;
• acrylic paints;
• tassels;
• glass for water;
• varnish, better water based.

Work process

First of all, you need to wash the bottle well and dry.
When you decide on the design, you can move to the applying of the first paint background layer. Equally apply acrylic paints with a brush on the entire glass surface. Now you need to gain a little patience. Wait for the base completely dry. Only after that you can move to the further drawing of the selected motifs. It may be landscape, abstraction, geometric patterns, etc. Neat tassels of different shapes And draw your thickness every element.

If you still do not have drawing experience on bottles, start from simple option. Paint plastic or glass bottle Monophonic paint. You can use paints in the ballots, then the process will be even easier and faster. After the surface dry,
Stick strains of decorative scotch

Or cover the butterfly or flower carved from a piece.

And in order to create such a embossed pattern, stick to staining on the surface of a bottle pieces of lace, a strip of fine cardboard, paper flowers or a thin stencil. After the glue dries, and the elements will hold hard on the bottle, it remains only to paint into the desired shade.

But an example when decorative vase From the bottle on needs any additional decorations. It is enough to choose a shade of paint that comes to your interior:

If it is difficult for you to come up with and implement a drawing on your own, take advantage ready stencils. After applying and drying the base, attach stencil to the bottle and apply paint contrasting with the help of a sponge (sponge) or tassels.

Lovers to work S. polymer clay Also find the use of your abilities in the decoration of interior bottles.

Decorating bottles. Decoupage

The site already has an article about how to work out of it you can learn the main points of the process and the sequence of actions. When decorating bottles of equipment, it is no different, so we give only a few examples of how you can decorate conventional bottles With a wipe with a pattern or a decoupage card.

Decor bottles with stained glass

Materials:

• glass bottle of any size;
• matte stained in paint. two shades;
• pencil and paper;
• double sided tape;
• scissors;
• sponge and brush;
• beads, cords, braid or other decorative elements.

Progress:

• we draw on paper pictures that we want to see as a pattern on the finished vause;

• we glue them to bilateral scotch and cut out the contour;

• we tear the protective layer of the tape from the other side and glue the resulting pictures to the bottle surface. Next, with the help of a sponge, we paint a bottle from all sides;

• i turn over the bottle and just cover the paint bottom. We are waiting for the paint to dry well;

• divide the drawings;

• with the help of thin brushes draw contours of golden stained paint;

• decorating the top and bottom of the bottle with braid and beads;

New Vase will be a great interior decoration!

How to delight and surprise guests during a big holiday, how to decorate your own chest, in which the dishes are stored for festive feasts, without spending a lot of time and effort? It is enough just to show fantasy and reorganize the usual item for all - a bottle. You can choose it from under any fluid, the main thing is interesting appearance And no damage.

Decor bottles will help even the usual holiday to become unforgettable

Step-by-step instruction:

1. Work starts from the bottom of the bottle. You need to follow in circular order. Split all low part Glass products Thick layer of glue "Moment".
2. To the very edge, glue the twine and start it sequentially wind from the most extreme bottle line.
3. Tight put the twine thread to the previous layersAt the same time pouring a little glue. Do not apply it to the threads themselves or on the entire surface. It is enough to regularly add 2-4 drops to the base at the place of subsequent thread wrap. No need to pour glue to large distanceSince he quickly dries off.
4. When the protrusions or recesses begin, as well as during the transition to a narrowing element of the base, it is necessary to rinse the surface with a sufficient thick layer and try to spin the thread in these places as quickly as possible. It is advisable not to damage the quality at the speed of operation, since inhomogeneous coating can spoil the appearance finished product. Absolutely all parts, even when it is used for each other, should be wrapped in this material. If you need to put the threads inside the larger recesses, you need to carefully push the material in them with a stick or hands.
5. The neck or other particularly thin parts are wrapped a little more densethan the remaining elements of the bottle, since there is a risk of solving fasteners.
6. Separate from the twine tie a crochet braid. It is done by applying the basic reception by refueling each new loop in the previous one. If the master does not own this technique of knitting, you can simply separate the threads into three parts and link the familiar braid. When this line is performed, it is necessary to periodically post it to the edge of the bottle to understand whether it is suitable for the exact size of the circle. It is necessary to make an accurate detail in size, as the sustainability of the entire structure depends on it.
7. Stick the resulting pigtail to the bottom, slightly applying to the basis of the design.
8. Bottle decoration is performed. You can use any healthy materials that have aesthetic appearance and are suitable for twine. Most often masters make curls. For this take ordinary thread The twine is wrapped in several layers and twisted in chaotic order or form a circle.
9. The central part of the obtained elements is desirable to decorate any bead or decorative flower.
10. If the resulting product seems too dull, it can be easily refreshing Watching bright if you use old decorations or any transparent elements from clothing. You can see children's and already unnecessary sets for creativity. They also help create an excellent look at the product.

Such decorated bottles will perfectly fit into or.

The sword is not a bright material, so it is desirable to give it a brilliant and original appearance, adding something brilliant or stylish. To complete the finish in a simple style, it is enough just to add coffee beans or a non-rigid button. It is desirable to add exactly the same circle to the very top of the bottle so that it looks over.

Wine bottles decor Watch video master class:

Crup

Groats are very easy to decorate - just pick a few varieties of croup

One of the interesting and original - decor croups.
In addition to a variety of cereals, special corrugated paper will be required, two types of glue: PVA and hot. For beautiful decor Bottles need paint with dispenser. Standard Bottle Caution Procedure Looks like:

• selects beautiful bottle and cleared by fat;
• groats are pasted in the form of clearly bounded zones, patterns or protrusions;
• roses are made from corrugated paper by twisting. It is advisable to form them in different sizes;
• when all the elements are glued, you need to give them to dry;
• a bottle is covered with paint. It should be applied evenly and everywhere.

Flat Manka, buckwheat, rice, millet can be supplemented with curly pasta. Additionally, you can cut various curly elements and add different scenery.

Ribbons

Required:

• satin ribbons;
• parching tapes (when adding brilliant enclosures);
• glue "Moment";
• additional decorative decorations.

To decorate was successful and the bottle has become an excellent souvenir, it is desirable to take a product with a gold foil without adding any inscriptions. The amount of ribbon consumed depends on the width of this material. To make the decoration of the bottle, it happened, and the result was excellent, you need to perform the decor according to the scheme:

1. To implement each layer, you must first apply the ribbon to the required place without gluing, and then cut off the excess.
2. On the surface of the bottle are placed with glue. Many this substance is not necessary to use.
3. The tape is glued close to the surface, stretches. Each subsequent layer is adjusted in length.
4. During the gluing tape on the junctions, a kind of pigtail is formed. You should always cross the edges of the material in one direction so that the pattern turns out to be smooth.
5. When the tape is narrowing to the neck, you should watch it absolutely smooth.
6. After the bottle is completed, the base decorative layer can be decorated with any additional elements.

How to make a decor of a bottle using a wedding ribbons:

Smooth (wide) part of the bottle needs to be stuck with smooth stripes. It turns out an inaccurate seam. It is closed by a stretch of across ribbon.

Lace.

Lace can already re-establish not only bottles. Here are interesting lactions from lace

Painting Bottle - excellent option Decor.

Especially this decor will like children

Decoupage. Special napkins will be required, which after applying the bottle are painted with inhomogeneous drawings, decorated with floral motifs. At the end of the work, you need to give the surface the effect of aging. It can be done by applying light, inhomogeneous paint to the folds of napkins or when coating with a special varnish.

Decoupage - one of the most beautiful options Decor.

Lovely gift for any holiday

So you can decorate not only bottles, but also vases, jars and anything

Interior decoration. Can be poured into a bottle of different cereals Forming multicolored patterns. For convenience, a funnel will need. Also allowed to lay out pieces of fruits or vegetables,however, for this you need to apply the preservative. You can use not only alcohol, but also a saline solution, gelatin. Vinegar does not need to be applied, as it will eventually give products a white shade. First, fruits or vegetables are stacked in a row, forming decorative combinations, then flooded with a preservative and clocked.

Here is also an option to decor canned fruit

Festive table setting at home.

Here is such a decor will turn an ordinary dinner in a romantic date.

The option of decor beads - beautiful and unusual

But the option how to make a real designer thing from the usual shell:

So that the resulting structure brought only positive emotions, It is necessary to choose an aesthetic bottle and use high-quality, preferably new materials. When the work is performed taking into account the harmoniousness of the color palette, and the whole drawing is agreed not only with the details of each other, but also with the surrounding interior, the result will be excellent.