Production of ceramics with their own hands - a hobby for sophisticated natures. How to make plates from polymer clay

Just like adult woman In the kitchen, a little girl can not do without dishes during the game. Young hostess that places dollhouseiC will definitely agree to make the dishes from plasticine to feed their favorite toy heroes. Some home utensils we have learned how to sculpt together with you on one of the previous lessons. In this master class, we will consider in more detail the process of creating a plate, because without it in the puppet farming can not do.

Plates are different: large and small, flat and deep, monophonic or with an interesting ornament, so no one will tell you a universal recipe for such an accessory you need. Start a bright plasticine and take to work with a fun mood.

1. Consider a two-color plate. Choose two contrasting shades from a set of plasticine, for example, blue and yellow.

2. Cut the stack with a small part from the blue bar, get drunk in your hands, then roll the ball and press the palm to the surface of the board. The resulting round bonding will be subsequently used as the base of the plate.

3. Similarly, process and prepare yellow plasticine, but the second pellet should be much larger.

4. The uneven edges of the pellet can be carefully trimmed with a stack in a circle or squeeze the neck of a round jar of suitable size.

5. The inner part squeeze any lid of a small diameter. As a result, a round ring should be.

6. Connect the blue bottom and upper yellow layer.

7. Now you need to decorate the resulting plate. At the edge, attach a blue thin rim.

The final look of the crafts. Photo 1.

The final look of the crafts. Photo 2.

The final look of the crafts. Photo 3.

Plasticine plate is ready. In this case, we got a flat plate in which you can fold fruits, candy or other sweets for your favorite doll. To make a dish deep, just press the plasticine with your finger in the center. Your child will definitely like such useful plasticine crafts.

1. Prepare a clay ring to secure the disk on grinding Circle. After the knead, place the Fayans center, pressing the base of the palms.
2. Put the index finger of the left hand, medium and unnamed, as well as an index finger right hand In the excavation and push on top for the opening of clay. Extrall, expanding the hole, and begin to form a ring.
3. Capture clay with big and index fingers of the left hand. At this time, the right hand will keep the ring. Pay attention to how both hands remain in close connection with each other to avoid moving
Rings from the center.
4. Holding hands in the same position, slowly expand the ring until it reaches the disk diameter
5. With a slow rotation of the circle, place the disk in the center while holding it with two hands.
6. After centering the disk, knock on a fist: along the center itself to secure. Air captured in the ring will create suction by saving the location of the disk.
7. When the disk is on the spot, add the clay to the plate prepared for the plate and check.
8. With the help of large fingers of both hands, open the clay.
9. Change the position of the right hand, putting the index, medium and ring fingers together with a thumb of the left hand on the inner surface of the hole and press down to expand it.
10. Start forming the base of the plate, not allowing its deviation from the center, pulling the shape along the edges using hands.
11. As when working with a pile, pull the plate up, so that the clay passes between the bent index finger of the left hand, the index finger of the right hand and the thumbs of both hands.
12. Use a rectangular scallop to align the internal base of the plate, connecting hands, as shown in the figure.
13. The same scallop align the outer wall of the plate, which still has the shape of a pile.
14. Code the connection with the help of the thumb and middle finger, so that the clay passes through this connection and the index finger
right hand. Check the edge of the left hand. Your thumbs need to touch each other.
15. Grab the edge of the left hand and thumb and align its side-side of the index finger of the right hand.
16. Holding the wall between the index finger of the left hand and the big and index fingers right, pulling the walls, start to give the shape to the plate.
17. Continue the work, keeping the same position of the hands, but now push the clay with the left hand with the left hand, starting to align the wall.
18. Wet squeezed sponge clean the inner surface of the plate during the rotation of the circle.
19. Pottery step completed. Tighten the potter string tighten, place it
On the disk and swipe under the plate for separating from the disk. Remove the disk from the circle and leave a plate for solidification in the desired form.
20-25. When the plate acquired the condition of the skin hardness, it is started to roll. As when working with a pile, this operation is always performed by the bottom up, since the inner surface is already completed in the process of pottery. If you use a blank (according to our recommendation), it must correspond to the central part of the plate from the inside, leaving the edge of the plate free to avoid cracks or skews formed when overweight. Prepare a blank desired size Put on the center of clay with the fingers of the left hand and the big finger right, while the thumb left is on the back of your right hand. At the same time, your four fingers right hand hold the blank outside. Deep by a hole with the help of hands in the same position, pull the walls to open clay to the desired size
26. Clean the inner surface of the blanks with a wet sponge.
27. With a fixed state of the circle, check whether the plate corresponds to the bar
28. Cover the blank with clean rags, imposing them on each other in the direction of rotation of the circle.
29. With a slow rotation of the circle, check the plate on the blank.
30. Perform a plate centering by holding the product with both hands.
31. With the help of a pottery needle, apply a circle on the base of the plate.
32. Use round tool To remove excess clay around the base.
33. Using a triangular tool for clipping, clean and align the base of the plate.
34. You can also use for cleaning and leveling the base rectangular scallop
35. With a fixed state of the circle, remove the plate and put it on the blank, placing the center down the bottom
36. Using a round tool for scratching, so as not to leave scratches, spend on the inside of the plate.
37 and 38. With a semicircular scallop, finish the processing of the inner surface of the plate,
39 and 40. Turn the plate upside down, placing the center on the blank, and remove excess clay around the base with a triangular tool for scratching
41. With the help of the same tool, make marking and remove excess clay.
42. Round the outer edge with a semicircular scallop.
43. Using a triangular tool for scratching, make marking of the inner part of the base.
44. Remove excess clay from the internal base.
45. Align and round the edge of the border, send an external and inner edge.
46. \u200b\u200bWith the help of scallop, align the internal base.
47. Plate is completed.

Does the girl need such a big and bright dish performed with their own hands? Well, of course, after all, she probably has a favorite doll for which it equips a secluded place or a cozy puppet house. All girls love to play hoses or mothers, feed their toys, take care of them. And the plates never happen much. Let the utensils be made of plasticine, she will play a role.

In this lesson, we are glad together with you large plate - dish for puppet Domika . This is a dishes on which you can lay out buns or candies, cakes or fruits. If you have small rhinestones, they will perfectly complement the product, make it elegant and rich. Such small fittings can be bought for a penny in any specialized store or pick up a bright beads, it will also fit.

What can be used for puppet modeling:

Yellow and red plasticine;

Toothpick or needle;

Cylindrical tube from glue or a cosmetics.

How to make dishes do it yourself

1. The plate shape will be traditional - round, although you can make a triangular or rectangular, oval dish. Bright yellow Usually like children, attracts attention, so we propose to use it. Although, of course, any color will be appropriate, because in stores we see completely different variations of ceramic dishes. Also yellow perfectly will be harmonized with red.

2. The entire prepared piece of yellow plasticine divide into 2 parts, one of them should be 4 times less than the second. Roll down every piece in your palms to make a ball.

3. Next, both balls can easily turn into flat round cakes. These billets will become the main parts that are required for the production of plates. Big pellet will become the main part of the plate. Use a cylindrical tube to sell the central part. Attach a cake from one end and push, but not much. There should be a dent in the center of the rounded form.

4. Turn the future plate with a bottom to myself and attach the second round in the center - little size. It will be a kind of footboard. The shape of the plate is set - it is round and stable, you can upload a puppet food to it. Now it will remain just decorate your craft. To do this, we have prepared red plasticine, toothpick and rhinestones.

5. Put the dish in front of yourself. Apply the tip of the toothpick flat side To the edge of the cakes around the circumference and add, leaving shallow dents. Promotion evenly around the circumference. Thus, it turns out a more interesting carved form of a plate. Also on flights around the circle, glue red dots. Rolling the balls, then fasten to the sides and press the finger from above.

The master class will be very interesting and adults, and children. Nowadays, it became very fashionable to return to the original folk crafts. In informative and useful to make a small excursion to the past. The occupation is possible to visit alone, and together. The creativity will be nice to do and in love with a couple, and a parent with a child. The exciting and exciting process of the formation of the vessel hobbies any. How cool to create your own hands practical and beautiful products! Handbook made of the clay plate will serve as an appointment to its author. Either remind of a giving a man to whom he will be presented. By the way, this is a universal gift.

Fastener

To make plates from clay, preferably use the wooden disk on the grinding wheel. Otherwise, the completed product will be removed with damage.

There are two ways to fix the discs:

The first is to do a pair of holes in the head of the pottery circle in such a way that they responded a pair of fasteners.

The second is to center the clay ring where the disk is attached.

Billets

For the production of dishes, clay form in the harnesses either into flat pieces. Preferably the first option, harnesses. For their billet, clay pieces are rolled with a rolling pin. Then give the shape formed a piece. With this method, shallow and flat plates are obtained.

Start of product formation

Now, in fact, how to make a plate of clay.

Initially, the clay ring should be formed. Bending clay, you need to place it in the center, pressing your palms. It is necessary to put several fingers into the recess. Then you need to crush on top in order to open clay. Pulling the clay and making the hole wider, you need to start the formation of the ring. Let's take the material with two fingers of one hand. Another hand holds a ring. Both are firmly connected, so that the ring has not shifted. You need to slowly expand the ring. It comes with a diameter with disk sizes.

Further modeling plates from clay is leaning circular rotation. The disc must be kept with both hands. In the center it is necessary to knock with strength to consolidate it.

Segment of work on which you can feel like a real master, skillful potter

On the disk you need to post the prepared clay com and make centering. To the fingers should open clay.

Production of plates from clay continues with their own hands. The basis is formed. It is important not to make deviations from the central axis. To do this, pull out the form, you need to pull the plate up.

The crest must align the base. They also need to smooth the wall of the plate (it is still reminded of a bowl). Hold the wall with your fingers.

Pull the walls, begin to giverate the dishes. By the way, it should be noted: it is quite realistic to manufacture in such a way a plate of clay at home. However, further: pushing the clay down. Align. Clean inside. Pottery on this is completed.

Department and clipping

However, the manufacture continues. Highly stretched string spend under a plate to separate it from the disk.

As soon as the clay surface on hardness will resemble the skin, it must be turned on. It is always done upside down.

Differences with a blank

If we make plates from clay using blanks, we leave the edge of the plate free to prevent cracks or distortions.

Take a suitable workpiece. Four fingers need to keep a blank. We make the product deeper, pull the walls. Clean the blank from the inside. Stopping the circle, check whether everything goes according to plan. Rotate the circle, put the product. Perform centers. Special needle will apply a circle.

Finishing Stage: Cleaning and Grinding

Production plates made of clay for food comes to an end. Clean and grind so that our plate was not just decorative Product. So that it was suitable for use for destination, so that it was drose - you need to work hard.

Round tools remove unnecessary elements from base.

The triangular tool makes it possible to sharpen, clean and equal the foundation of the ass. We make markup by the same tool.

The edge is spinning a semicircular comb. It is also necessary to dissolve the internal basis.

Align and spin the edge, evenly weigh the edges.

Manufacturing successfully completed. Now the finished dishes must be dried and firing in a special oven. When firing should not be sharp temperature surges. If you produce all these processes correctly, the dishes will serve for a long time in their direct intended purpose. After firing, the product can be covered with icing and burn again.

If you like the lesson, we offer you to view the catalog of pottery equipment on the site

We present to your attention a master class on making plates from polymer clay do it yourself. These plates are awesome, and the decorations in them look just amazing! Plus it is not at all difficult to do, there would be a polymer clay, paint-spray of gold and a little free time!

Tools and materials Time: 2 hours Difficulty: 7/10

rhinestones and crystals swarovski;
polymer clay Fimo;
toothpick;
paint-spray gold color;
glue universal;
glossy or matte varnish for plastics;
mold (dish for your taste).

Who would have thought that clay could be so chic! These plates - excellent gift For those who love luxury! They perfectly fit into any interior, whether it is a classic or minimalism! Use them for storing jewelry, coins, keyfobs and other little things.

The secret of ethics of plates is that to protect plastics from exposure to gold paint we have been glued with glue. With it, paint can not be patched in the right places on the clay, and you can easily create the desired pattern. We also applied toothpicks to create a lattice structure adding depth of these dishes.

Step-by-step master class

So, turn into sculptors and make plates from polymer clay.

Step 1: Make a dish

Take a piece of polymer clay of medium sizes and dislike it until the material becomes smooth and pliable.
Roll the plastic into a sheet with a thickness of 0.6 mm. Depending on how size you want a dish, roll the reservoir of the appropriate size.

Set the press form. Place in non-material and make a plate of your taste.
In the middle of the formed plates, we press the large swarovski crystal or any other stone to your taste.

Step 2: Add Texture

With the help of toothpicks, draw the pattern of small points on the surface of the dish. Create a drawing arbitrary way as you will tell you your fantasy.

Step 3: Send to the firing

Bake the clay in a heat closet at 125 degrees for 20 minutes, or follow the instructions on the clay package (each brand is slightly different).

When the press form cools, turn it upside down and remove the dish.

Step 4: add glue

Cover all smooth pieces of dishes that you do not want to paint, a thin layer of universal glue. Wait until it dries.

Step 5: Add gold and check

Cover all the dish paint-spray gold color. Wait until the paint is driving. In places of applying glue, delete gold paint, opening the color of clay. Also, if the paint got into a crystal, you can easily scrape her nail.

Of course, you do not need to use gold paint. You can apply silver, copper, bronze and any other metallic shades to your taste. For example, green and red clay are perfectly combined with gold paint to celebrate the New Year. Pink and purple plastic couple with silver metallic are remarkably suitable for crafts for Valentine's Day. Experiment with form and colors to create an ideal image!