How to cut a glass bottle with ordinary thread? Easy and fast! Master class: how to cut a bottle of thread - everything is simple! Technique cutting the neck in a wine bottle

Master class for cutting bottle thread

Everyone is well known that from unnecessary glass bottles you can make a lot of useful and original things. However, not everyone knows how easy it is, because many people do not represent how to cut off part of the bottle without glass cutter. We offer you a master class of how you can cut a glass bottle using an ordinary thread quickly and just at home without using a special tool.

In order to cut the glass bottle, we need:

• Cut ordinary cotton thread.
• Acetone or alcohol.
• Capacity with cold water.
• Match or lighter.

Procedure for cutting thread

Step 1

Cotton thread moistened to acetone

We plan a marker in which you need to cut a bottle. Welcome thread in acetone and turn it out several times on the planned line. Tie the rope and cut off her tips.

Firmly tying a thread

Cut the tips of the thread

Step 2.

Holding a bottle in a horizontal position above the water tank, set on the thread. At the same time, the bottle must be turned to ensure uniform heating.

Gilt the thread

Step 3.

As soon as the thread begging, immediately you need to dip a bottle into a cold water container. From a sharp drop temperature, the glass itself will crack along the line where there was a rope.

Dip the bottle in very cold water

Step 4.

We divide two parts of the bottle with hands

At the last stage, it remains only to handle the edge of the emery or file. Further from the obtained glass, you can make an original candlestick or colors vase, decoring the product to your own taste, in general experiment!

Separate sandpaper cut

In this publication, you will learn how neatly and smoothly or a jar with a motor or vegetable oil.

Fill the dishes with cold water to the level where we want to make a cut. We put it in some container that you also need to fill with water to water level from the sudine. Now we will add the bowl into the bowl until the thin oil crust is formed on the surface of the water, which will completely curl the glass floor.

The most important thing is to pour the oil straight from the bottle, since the film will be uneven and thus will not come out.

Next, for the procedure for cutting the bottle or banks, we will select a piece of metal. The thicker glass that we want to cut, the thicker should be metal. The glass is quite subtle, so the blade of the stationery knife came out perfectly. We decorate it hot with a burner or gas stove.

Now the hot blade is lowered into the bowl only on the oil level.

Do not forget to protect your skin and eyes from hot splashes!

Due to the rapidly hot film, the glass heats up, and due to the temperature difference cracks. So we can gently cut a glass bottle.

As you can watch, Skol turned out perfectly smooth.

There are several simple ways how to crop the neck of a glass bottle. You ask, why do you need it? From a beautiful circumcised bottle, a cool glass can be made, a vase for colors or a stand for different little things. But, before proceeding with the cutting of beautiful bottles, I still recommend to practice on ordinary beers, as you need experience and some skill in this matter: exactly it does not always work the first time.

So, I will tell you the most simple ways to cut the neck from a glass bottle.

Method 1 - Use glass cutter

It takes glass cutter. You can use the factory model or make yourself. The design of the homemade device may be different: the main thing is that the bottle and the cutting element are securely fixed, but the bottle is freely rotated.

Important! With a slit, you need to do one passage: it will provide the most smooth edge.
Next, you need to prepare hot (boiling water) and cold (you can with ice) water. On the line of the cut, shed first hot water so that the glass is well warmed.

After that, we just jump on a bottle with cold water.

From the temperature cut, the glass should be broken down along the pre-cut line. If this did not happen, the procedure must be repeated (hollow first hot and then cold water).

Method 2 - Flame Candle

For this method, the candle and a piece of ice will be required (you can use a container with very cold water). To split the neck, on the bottle, the marker is carried out with a flat line, according to which the glass is well warmed over the candle.

Then the cut line is cooled with ice, after which the glass splits with a slight tapping.

Method 3 - Nargev from friction

Another way to split the bottle of tinsel is to use the heating of the glass due to the friction force. For this, two plastic ties that serve as limiters are put on the bottle. There are three turns of twine between them, after which the twine for loose ends begins to move forward / backward.

After 2-3 minutes, when the glass is sufficient, the bottle is placed in cold water, and with a slight tapping, it turns off along the heating line.

If there is a small incision before friction on the bottle with glass cutter, it is not necessary to use cold water: the glass will crack when heated independently.

Method 4 - Installation with Pokal Thread

For this method, a transformer will be required, for example, with a microwave oven with a secondary winding, instead of which three power cable turns are installed.
The free ends of the wire closes through a thick wire. Stand (base) should be heat-resistant and dielectric.

The next step is to connect the transformer to the electrical network. When the transformer is turned on, the thread is increasing: a bottle is applied to it and gradually rotates. When warming up the glass of the neck along the warming line is disconnected, so it is necessary to ensure that the heating is uniform and one line.

Method 5 - Burning Rope

For this method, natural twine and a bit of purified gasoline for lighters will be required. A piece of beeps is cut down the length required for turnover around the bottle at least 3 times. Then this segment of the twine is soaked in gasoline so that it is completely soaked.

Washed in gasoline, the twine is wound on the bottle in the place where it is necessary to produce chips and ignite.

When gasoline is almost fascinated, the bottle is lowered into cold water, where the glass is bursting along the heating line from the temperature difference.

Method 6 - We use specialized equipment

This method is to use the tile cutting machine. Diamond disk is good and smoothly cuts thick glass. It is recommended to work in gloves, protective mask and glasses, as glass dust is very dangerous. The advantage of using a cutter is the ability to cut a bottle into small washers, which is not available at other ways.

The decor made of glass bottles is quite popular lately, and since many are interested in the question of how to cut a glass bottle at home, without glazing applications, then today's master class I want to devote a simple but interesting way to split bottle thread ...
In this connection, the topic of this master class "How to cut a bottle of thread - nothing complicated!".

To work, we will need:
1. Glass bottle;
2. Woolen threads;
3. Solvent (can be kerosene, alcohol, cologne, acetone);
4. Scissors or stationery knife;
5. Gloves (remove the skin of the hands from the effects of the solvent);
6. Lighter or matches;
7. To protect the eyes just in case, glasses (in fact, there are no fragments, but careless caution does not happen);
8. Deep basin filled with cold water.




So how to cut a bottle with a thread? We take a woolen thread, measure and cut it off in such a way as it was enough for 3-4 bottle turns.
Immerse the extinted and cut-off thread into the solvent, and immediately wind the bottle, in the place where the "inclination" is planned. You can simply wash the thread or tie a nodule, in this master class I simply made a winding.




After that, this thread is set in with matches or lighter, and the bottle is better to keep in the inclined position - strictly horizontally (parallel to the ground), neatly scrolling around the axis.


The fire will burn approximately 30-40 seconds, as soon as the burning thread will go out - quickly lower the bottle in the prepared basin filled with cold water.


Next, the characteristic sound of the cracked glass will be heard, and the bottle is instantly divided into two parts. This type of glass cutting is based on a rapid change of temperatures, we all know from the lessons of physics, that when the glass is heated, the glass is expanding, respectively, with a sharp change of temperatures, a kind of glass destruction occurs and it is simply cracking!










How to cut a bottle with a thread, we found out, but how to treat sharp glass edges? You can use sandpaper or stone for sharpening knives. The latter should be treated with the edges of the bottle pre-immersed in water, so the processing occurs easier and faster (it is better to protect the hand with rubber gloves). Friends, I ask you do not forget about the notorious safety technique, how will you work with fire and glass, protective glasses on the eyes, gloves in arms and a basin with plenty of water - mandatory!

Round glass can serve not only with a liquid vessel, but also a source of inspiration. With the ability to cut glass bottles and banks, you can make many stunning things. Starting from glasses and ashes, and ending with lamps and designer blades, the number of crafts from recycling is limited only by flight of fantasy. It's amazing how original and beautiful things can get from almost free material. The main thing is to create this desire, and we will tell about the process itself in this article.

Types of glass cutters for bottles

To date, there are many finished fixtures for cutting glass cans and bottles. All of them have a different design, but by type of action only in two groups are divided: cutting and heating. The general principle of both groups remains one - the bottle is fixed in a horizontal position and rotates around the glass cutter or heating element. The principle of operation of devices is rather similar, however, has some features.

Roller glass cutter for bottles has a simple design and is widely used by amateurs of homemade. It can be assembled with their own hands from the girlfriend. The cost of the finished device varies from several hundred to the pair of thousand rubles. The cut line is quite smooth, but the edges require grinding. The optimal option for homemasses.

Bottling with a heating element has a more complex mechanism, but also higher quality cut. The device works from the mains or battery. You can collect such, if there are special knowledge, but at your own risk and risk. Finished devices cost several thousand rubles and are unlikely to interest most of the population. Suitable for creative workshops or designers.

Glass cutter for bottles with their own hands

Spending money on the purchase of glass cutters for bottles is not at all. This device is very simple, and in the presence of certain details and desires, it can be made with your own hands. Below, we will give step-by-step photo instructions for the assembly of a convenient and practical cutter. Perhaps some details will have to buy, but they cost a penny and sold on any market or in a construction store.

Required materials:

• Wooden base: 25 x 14 x 2
• Side bar: 25 x 4 x 2
• Facial Bar (limiter): 11 x 4 x 2
• Wooden rail: 25 x 1 x 2
• Roll-out rollers: 4 pieces with a maximum diameter of 4 cm (preferably non-reflective with rubber coating)
• Cable Channel: 25x2 (with minimal thickness)
• Roller glass
• Some Glasses of PVA and the handful of selflessness

Build device
We will begin with the most difficult and jewelry stage of the work - assembling the cutting mechanism. We take a wooden rail of 25 x 1 x 2 and saw two segments from it, 3 cm long in the resulting woods, carefully make through longitudinal holes. They will serve as a groove to install a hinge, which will walk the guide with glass cutter.

From the same rail, cut off another piece, a long 9-10 cm, and we have all the details as in the photo below. Cable Cable Cover Cut the length equal to the size of three wooden parts (2 segments of 3 cm and rail widths - 2 cm), about 8 centimeters.

At the next stage, fasten the cutter on the guide. To do this, at the end of the rail, it is better to make a small deepening, which will serve as a kind of fiber-cutter limiter.

So that the wood has not cracked when spinning self-reserves, at the point of attachment, you should make a hole in advance by the drill of a smaller diameter.

If on your self-tapping screw, like on a photo cutter, there are notches for pumping glass, then for the attachment you can use them. If there are no grooves, or they are located on the cutting roller, it is better to drill the fastening hole in the metal head. In general, the main thing is that the glass cutter is installed as in the photo.

After fixing the cutter, it's time to collect the design together. To do this, we screw two bar 3 cm around the edges of the cable cable cover. In advance prepared grooves in bars, twist the screws-hinges, long no more than 4 centimeters (long can be trimmed). At the bottom of the guide rail, drill through a hole, install it between the bars and fix the screws. To rake could rise, its lower angle should be smoothed by treating sandpaper or file. We look at the photo and repeat.

Having finished with the design of the cutting mechanism, you can move to the assembly of the working platform of the future bottling.
The first thing is fastened to the base of the lateral bar 25 x 4 x 2. It is possible to connect these parts using self-tapping screws by screwing them on the reverse side of the base. You can also use PVA glue or epoxy resin.

When the lateral part is fixed, you can move to the setting of the rolls. The first pair of wheels is set at a distance of 3-4 cm from the top edge of the base. The next pair is located 12 cm down. For more elongated bottles, you can prepare another set of holes, 5 cm below the second pair of rollers. Pay attention to the photo.

The final stage of the assembly will be fastening the bottom of the cable channel to the edge of the sideboard, and planting the end limiter on the self-tapping screw or glue.

Light movement hand attach the cover with a cable-channel cutter and the device is ready to use!

Another way to fasten the glass cutter.

How to cut a bottle without glazing

Compact bottles - the device is very convenient, but it is done for frequent use. What to do those for whom this procedure is single and not repeat in the next decade. Buy the finished device is expensive, but to collect long and not the fact that it is necessary. As you already understood, now we will talk about how to cut a bottle at home without glazing.

This method of processing glass is based on heating with sharp cooling. For sharp change of temperature, we need a meter of a woolen thread, a combustible liquid (aciton, gasoline, kerosene, alcohol), a large container with ice water and, actually a bottle. Prepare all the components, you can proceed.

Woolen thread dip in the container with a flammable liquid so that it is completely soaked, and wind the thin line into the place of the future chip. Next, we set fire to the thread and wait for its complete exercise. During burning the bottle, keep horizontally, and constantly rotate so that the fire is evenly heated with the whole line. As soon as the flame is walked, immediately immerse the bottle into the prepared container with water. After a couple of three seconds, the characteristic sound of the leap-free glass will be distributed, signing on the successful separation of the bottle. If there was no click for 5 seconds, you can make a small effort and try to break.

The methodology can be successfully applied to the controlled chipping of most types of glass containers, but sometimes there are exceptions. The effectiveness of the temperature difference, largely depends on the strength of the glass.

For those who want to see on a more visual example, how to cut a glass bottle at home without glazing, we recommend to see the next video.

Save this page in your social. Networks and come back to it at a convenient time.