Hot glue gun. Overview and purpose. Crafts made with hot glue gun and hot glue Hot glue gun homemade

The glue gun is one of the most commonly used tools in the home. With its help, we fix, insulate, create homemade products. What if you try to create a glue gun yourself?

See how to make a DIY glue gun:

So, to create our own glue gun, we need:
- teflon tape or other non-stick coating,
- a piece of tin that can be cut out of a can,
- copper wire,
- silicone rod,
- wooden block,
- an ordinary small boiler.

The materials are ready, you can start making a glue gun.

The first step is to make a wooden handle. To do this, you need to measure lower part a boiler, which, as a rule, is equal to 6-7 centimeters and convert the dimensions to a wooden block. Note that the dimensions have been transferred twice as the handle will be made in two parts. After that, it remains only to cut off two parts, make a depression small size so that both parts of the handle can be attached to each other and the middle of the boiler does not interfere. Finally, you can round off the handle slightly for a comfortable grip.

The wooden handle is ready. The next step is to wrap the middle part of the boiler with Teflon tape so that it does not heat the wood, and then fasten the two parts of the handle with self-tapping screws or electrical tape.

The first piece should be wound on a silicone rod, and from the second, a separate piece, 5 centimeters wide and 7 centimeters long, should be cut off. From this piece, create a small bag and attach it to the first piece by carrying both pieces through the passage at the bottom of the boiler, winding them with copper wire to fix it.

The cool gun is almost ready. To use it, just plug the gun into an outlet, wait until it heats up and slightly press on the silicone rod.

Attention!!! It is advised not to plug the homemade glue gun directly into an outlet. It is better to use an extension cord with a regulator to regulate the power of the boiler, which heats up to record temperatures without water, which can lead to rapid wear.

Every needlewoman has a tool such as hot glue. Such an item is required if you need to glue something together. Moreover, it can be used not only for its intended purpose, but also to create wonderful crafts... For example, you can familiarize yourself with a photo of glue crafts to understand what we are talking about now.

Comb for a cat

You don't have to buy a special pet hairbrush, as you can make it yourself. Take ordinary rubber gloves of your favorite color and apply small drops of glue over the entire area. Allow time for the glue to dry properly, and you can start stroking the cat. This process will become not only pleasant, but also useful, since such a tool will remove excess hair from the animal and it will not scatter throughout the apartment.

Buttons

If you are going to decorate any item of your wardrobe with your own hands, then a sequin button will undoubtedly be an excellent solution.

From the tools you need only hot glue and the glitter themselves. It is necessary to pour in sparkles and organize a circle out of them, then the whole thing is covered with glue and a small amount of sparkles is poured on top. When the glue dries, you need to make several holes with a toothpick through which the button will be sewn to the clothes.

Moreover, you can sell such hot glue crafts with your own hands and organize a good profitable business.

Eraser at the end of the pencil

Have you seen pencils with an eraser on the back? So, glue can become the same eraser, and it will be no worse to cope with the task at hand. Just dab some glue on the ball end of the pencil and let it dry.

Unique vase

You have glass at home transparent vase? Try making it more original with hot glue. Just apply the glue evenly in the form of a texture or pattern over the entire area of the vase, let it dry properly, and you get a non-slippery vase with an unusual design.

Shoes

As with a vase, you can achieve an anti-slip effect on other items. A better idea is a craft glue to make shoes that won't slip on ice. To do this, apply small patches or stripes of hot glue to the sole of your boots and wait for it to dry.

Now you do not have to be afraid that you will immediately fall as soon as you step on the ice. You can also make an inscription on the sole of the glue, which will look very unusual.

In the same way, you can get a coat hanger (hanger) for clothes, from which the clothes will not slide off. Apply a little glue evenly to the clothes hanger and wait until it dries completely. Try the improved thing!

Interior decoration

Apply the glue to the waxed paper in such a way that you get a shape, for example, it can be a snowflake. Wait for the glue to dry, and for an even more stunning effect, you can paint the snowflake with nail polish in different colours... Decorate a tree, wall or window with these shapes and they will delight the eye.

Please note that if you work with such glue with children, then be extremely careful, as the glue gun itself heats up very much, and the glue will be very hot - one awkward movement and you can get burned properly!

It is not necessary to spy on the techniques that are used to make crafts, try to take paper and make crafts from paper and glue using your imagination, we are sure that you will find your use for all this.

Wax crayons

Crafts made with wax crayons can ruin your glue gun a lot, so for this hobby it is better to use an old or unnecessary tool.

Instead of glue, you need to insert a colored crayon into the hole, and when the gun heats up, gently push it inward. Under the influence of temperature, the chalk will melt, and the molten colored mass will begin to drip from the gun. It is very convenient to use for creating colored blots in the composition.

Candlestick

For this work, you need a vase or glass of glass, glue with a gun, acrylic or aerosol paint and spray oil or ordinary vegetable.

Choose a wide container that you will use as a candlestick, as the temperature of a burning candle can melt the glue, which will undoubtedly ruin the product.

Remove any residue from the vase and cover with a thin layer of oil. Create a beautiful pattern or drawing on outer surface glasses, you can even come up with a special structure.

Your best bet is to apply glue lines that touch each other just in case you can easily remove the glue from the glass.

The next step is to carefully separate the adhesive from the glass. You can use a knife or screwdriver to help remove the layer.

When the work is finished, the glass must be rinsed from traces of glue, this is best done detergent... And the candlestick itself needs to be painted with paint of your favorite color. If you are using spray paint, then carefully read the instructions before using it.

Crafts made of threads and glue have an interesting look, which cover, for example, a vase with a layer of multi-colored threads, and glue is used as a binder.

It is not at all necessary to look at someone's work and repeat it exactly. Turn on your imagination and you can come up with an adhesive accompaniment to any item of your interior. There are a lot of options, you just have to raise your head and run your eyes over the objects that surround you.

You can also find on the Internet various master classes on crafts from glue that will help you if you really can't think of anything at all on your own. Some tips can be very helpful.

Try to surprise your guests and loved ones with such gizmos that are made strictly only of glue, without using other decor items. Take our instructions on how to make a craft out of glue as a basis, supplement them with something of your own and you will truly amaze your future fans.

Photo of glue crafts

One of the most commonly used tools in various homemade products and crafts is a glue gun, or it is also called hot glue. But not many can decide on such a purchase, since for some it may seem impractical. In this video tutorial, you can learn how to make such a glue gun with your own hands. It is perfect if you urgently need hot melt glue, but you don't have it at hand.

Teflon tape or any other non-stick coating;
a piece of tin (can be cut from cans);
copper wire;
silicone rod;
wooden block;
small boiler.

First of all, you need to make a wooden handle. To do this, measure the free part of the boiler and transfer it to a bar. We measure two such segments.

Divide the bar into two equal parts, round on emery. Inside it is necessary to make a recess for the base of the boiler.

We carefully wrap the main part of the boiler with Teflon tape so that the wooden handle does not heat up and burn out. After that, you can connect both parts with electrical tape or self-tapping screws.

Cut out a rectangle of about 8 x 15 cm from the tin. Using a silicone rod, twist it into a tube. We cut off another small piece of tin and make a kind of bag out of it. We make an incision in its wide part in several places. We insert the tube into the bag and fix it. We insert the resulting structure into the boiler, and reinforce it with copper wire.

Connect this device in the video lesson, it is recommended through the power regulator, since the boiler heats up too quickly without water and may fail.

Useful Tips

Conventional glue gun with hot glue can be used not only for gluing various parts, but also for creating various patterns and crafts.

When working with hot glue, be careful not to pay special attention to the safety of children as the glue gun gets hot and the glue comes out very hot.

Here are some very interesting and extraordinary ideas on how else you can use a glue gun and hot glue:

Crafts from glue. We use wax crayons.

You will need:

Glue gun

Wax crayons

* It is possible that after using wax crayons your glue gun will deteriorate, so it is advisable to use an old or inexpensive gun.

* If children are working on a project, then closely follow the work with a hot glue gun and hot melted crayons.

1. Remove the labels (pieces of paper) from the crayons.

2. Cover the work area with an old towel.

3. Heat the glue gun.

4. Carefully insert the crayon into the glue gun and push it in gradually. The trigger of the glue gun will not be able to push through them, so you have to do it with your hands.

5. The wax will begin to melt and you can use the colored beads of wax to create bright blots.

Wax printing is another variation on how you can use wax crayons and a glue gun to create vibrant pictures.

DIY glue crafts. Decorate a vase or candlestick with hot glue.

You will need:

Inexpensive, round vase or candlestick

Heat the glue and start gently applying it to the vase, layer by layer, so that you end up with transparent lines on the walls of the vase.

If you want to make more straight lines, ask someone to help you - have the vase twisted, and you will apply the glue.

Unusual crafts. Hot glue corals.

You will need:

Thin wire

Hot glue gun

Acrylic paint

Brush

Piece of plywood

Nails and hammer.

Making red coral

1. Cut the wire into several pieces different lengths... V this example their length varies from 10 to 40 cm. Bend each piece in half.

2. Heat the glue and gently coat all the pieces of wire with it.

3. Select the color you want to paint the coral with, in this case red. Use acrylic paint to paint the glue on the wires.

4. When the paint is dry, you can collect all the parts into one coral. Take 2-3 pieces of wire with glue and connect them together using another thin, clean wire (not covered with glue).

Add 2 more parts to the structure and connect them again with clean wire.

To make the coral stand on flat surface, all the ends of the clean wires must be twisted and bent in the form of a stand (see image).

Making white coral

1. Cut 3 pieces of wire, each between 30 and 35 cm long, and twist the ends together.

2. Bend all the wires the way you like and place them on a flat surface to which hot glue will not stick - glass, for example.

3. Cover all wires with glue. After that, you can add additional sticks of glue to your design.

4. When you have made the coral the shape you want, let the glue dry and paint it white. acrylic paint.

5. To make the base for the craft, prepare a piece of plywood and attach the ends of the wires to it with nails.

6. Cover the ends with glue and paint with acrylic paint.

Unusual DIY crafts. Hot glue snowflakes.

You will need:

Hot glue gun

Nail polish or acrylic paint

Parchment paper (NOT waxed (waxed) paper)

Drawn snowflake shape (optional).

1. Print or draw a snowflake on a plain sheet of paper and place the design under the parchment paper.

2.Use your glue gun and hot glue to trace around the snowflake pattern. Wait a minute for the glue to dry.

If necessary, after the glue has dried, you can slightly trim the shape with a hair dryer.

3. Carefully remove the snowflake from the paper. The paper can be used further to create a few more snowflakes.

4. Both sides of the glue snowflake can be painted with nail polish or acrylic paint.

Original DIY crafts ... Rolling pin with a picture.

You will need:

Any rolling pin

Felt-tip pen

1. Draw any pattern on the rolling pin. It is advisable not to draw too many lines.

2. Heat the glue and start applying it along the lines drawn on the rolling pin. It is advisable to carry out the entire process on a flat surface covered with newspaper or cardboard.

3. When the glue is dry, you can use a rolling pin to pattern the clay by rolling it out.

The glue can be removed and a different pattern can be applied.

Original crafts. Glass holder for candles.

You will need:

Small glass vase or glass

Hot glue gun

Aerosol or acrylic paint

Spray oil or plain vegetable oil.

It is advisable to choose a wide vase so that the heat from the candle inside it does not heat up the glue that may flow.

1. Wash and dry the vase, then wipe it with vegetable oil and a paper towel.

2. Start applying hot glue to the reverse side the bottom of the vase, drawing patterns with them. The main thing is that all the lines are well intertwined so that it is easier to remove the glue from the vase.

Continue glueing the patterns on the sides of the vase.

It is advisable to wear goggles to protect the eyes, as the glue will heat the glass.

3. When the glue is dry, carefully begin to peel the pattern from the vase. You may need to use a screwdriver, knife, or other tool to help you separate the pattern from the glass vase more easily.

4. Clean the vase from glue residues. Use dishwashing detergent.

5. Paint the pattern with glue. If you are using spray paint, carefully read the instructions, and act according to it.

Now you can insert a glass or a vase into the candle holder and you will get an excellent interior decoration.

Interesting crafts for children. Multi-colored dots for various crafts.

You will need:

Hot glue gun

Acrylic paint or nail polish

Brush.

It takes a bit of practice to get such smooth details, but in the end you will succeed, and all these details can be used to make various crafts and postcards.

Each dot can be painted with acrylic paint or nail polish.

Crafts for children: do-it-yourself printing (video)

* First, cover the table surface with a special silicone board or silicone oilcloth.

Crafts for the home: making a vase of glue (video)

Interesting DIY crafts. Makeup Brush Cleaning Board

Nowadays, there is a huge variety in the world of needlework, and crafts are made from various materials... Basically, these are paper, bottles, plasticine and the like that are familiar to us. Most DIY crafts require glue to hold them together, but in this article we will show you how to make hot glue crafts using a gun. Such crafts look very beautiful and unusual, and most importantly, they are very simple to perform. Even children 5, 6, 7, 8 years old can cope with such work. This article provides several crafts with step by step instructions, as well as video master classes for a clearer description. So, let's see what you can do with ordinary hot melt glue.

Original vase for sweets

Making a vase will give you pleasure, because it is a creative process. You can put sweets in such a vase, decorating festive table hand-made craft. To make a DIY vase see below for a complete description with detailed instructions.

You will need:

Hot glue gun
Paint (preferably in a spray can)
Glass bowl for base

Progress:

Apply cream to the outside of the bowl, so that later the glue can be easily removed.
When the glue is warmed up, we begin to apply it to the bottom of the bowl in an even layer. This will give us a stable bottom.
Further, starting to move from the bottom of the bowl, apply a pattern with glue. The drawing can be any, as long as you have enough imagination.
Leave the glue to dry completely.
When everything is frozen, carefully remove the glue base, starting from the edges.
When you have removed an almost finished basket is obtained, it remains only to paint over it with paints. In this way, you can make not only a vase, but also other containers.

Hot glue vase video

Hot glue bracelet

You can make such a beautiful bracelet with your own hands very quickly and easily. Such decoration will not leave anyone indifferent. How to make such a craft, we will tell you with full description every step.

You will need:

Can of coca cola
Hot glue
Bracelet jewelry

Progress:

Apply glue to the jar with horizontal stripes. The width of the bracelet will depend on the number of stripes.
When the glue is completely dry, carefully remove it from the jar. This will be the base of the bracelet.
You can glue various beads or appliques on this base, you can also paint it with paint.

Hot melt butterfly

A beautiful butterfly from ordinary hot glue will become good decoration flower pot... The craft is quite simple to perform, so you can do it together with your child. Below is how to make a butterfly with your own hands.

You will need:

Hot glue
Glass
Thin wire
Rhinestones

Progress:

Apply cream to the glass so that it is easy to remove the glue afterwards.
First, draw the outline of the wings with glue on the glass, then fill in the middle with a zigzag.
Draw the torso and antennae in the same way.
When everything is dry, we remove our blanks from the glass.
With the help of glue, we collect our butterfly, then we attach it to the wire.
You can decorate our butterfly with rhinestones or beads.

Decoration for the new year "Snowflake"

Hot melt glue snowflake will be a wonderful decoration New Year's interior... Even a child 4, 5, 6 years old can cope with such a craft, because it is very simple to perform. We will tell you how to make a beautiful and bright snowflake with your own hands with detailed instructions.

You will need:

Hot glue
Stencil
Glitter
Parchment paper

Progress:

We take a stencil and put parchment paper on top.
Apply glue on top of the translucent drawing.
Pour some glitter onto a piece of paper and dip a still warm snowflake in it. Our bright and holiday craft ready.

Video snowflake for the new year

Convenient pencil case

Hot glue can be used to make not only decorations, but also useful items for example a pencil case. Nobody will have such a pencil case at school, because it is made by hand. To get started with our craft, read the step-by-step instructions, or with a video master class.

You will need:

Hot glue
Lightning
Wide aerosol can with paint
Decorative butterflies

Progress:

Lubricate the can with cream.
We start applying glue with circles at the edges.
We make two vertical stripes with the width of the corresponding zipper.
Then we continue to draw horizontal stripes in a circle (retreating arcs from each other by about 1 cm), while not going into the line for the lightning.
Draw a pattern similar to a herringbone or a zigzag on the horizontal stripes.
When everything is dry, take out the balloon, and place the cap from the balloon in the sides one by one to apply a pattern.
We apply the drawing with a frequent mesh so that nothing falls out through the holes.
When the whole structure is dry, insert the zipper, securing it with glue.
We paint over our pencil case with paint and glue it to decorate butterflies. Now you can put whatever you want into it.

Video how to make a pencil case with your own hands

Amazing roses

Beautiful roses will be a wonderful decoration for your interior, or you can use them as a gift to family and friends. To make it easy for you to understand how to make a DIY rose craft, we made detailed description crafts with step by step instructions.