Soap bubble generator

• Compact models. The principle of their action is to rotate the only wheel and fan, which inflates the set of soap bubbles. different size. Such models need to be suspended so that bubbles fly from above, otherwise the desired effect will not succeed.
• Large generators. These units in addition to two main wheels and fans are equipped with additional, to achieve the effect of entertainment. They are pretty bulky, but very productive.
• Drum options. These models combine the advantages of the two previous options - compactness and productivity. Using these generators, a stunning effect is achieved - just soap extravagania.

Life is multifaceted and this is beautiful. It has joyful and solemn moments: birthdays, incendiary parties, bright concerts, festive gatherings. It is for such cases that created soap bubble generator - A device that will bring in your life the sensation of happiness and eases that can be seen with your own eyes.

Unforgettable soap show: how it works

Among the variety of options to be lost. In order to understand which model to choose, you need to get acquainted with the whole range. So, what generators are:

· Compact models. The principle of their action is to rotate the only wheel and fan, which inflates the set of soap bubbles of different sizes. Such models need to be suspended so that bubbles fly from above, otherwise the desired effect will not succeed.

· Large generators. These units in addition to two main wheels and fans are equipped with additional, to achieve the effect of entertainment. They are pretty bulky, but very productive.

· Drum options. These models combine the advantages of the two previous options - compactness and productivity. Using these generators, a stunning effect is achieved - just soap extravagania.

But every holiday is unique. How not to make a mistake with the choice of a suitable model for your celebration?

Soap bubble generators: Selection Rules

Since such products, as already mentioned, differ structural features and dimensions, as well as depending on this, price amplitude, then the choice rules - the most important thingTo consider before buying.

First, it is necessary to determine what event is planned and how often the generator will be used, and should also take into account the potential to carry it.

If the generator is needed, for example, in night clubwhere it will be constantly constantly, then, accordingly, it makes sense to buy a large 2-fan option. It will provide multiple unforgettable soap bubbles, designed for a huge audience. This installation will be static in the same room, so its significant sizes and weight will not bring difficulties with operation.

If a small celebration is planned in a circle of friends, family, in conditions kindergartenwhere the generator is planned to move or use on the street, then a compact small device with a single fan is suitable.

Drum model - perfect option In all cases described above. It gives a huge amount of sparkling bubbles of different sizes, flying out as it will be intended.

It is worth focusing on the environmental purity of fluid to refuel the generators, which gives the right to boldly use products for children's holidays. Making right choiceYou will get a delightful result.

Come Top 5 most frequent and probable breakdowns of soap bubbles generatorswho was born from the article about her own hands. The fault rating is compiled by the author's personal opinion, based on the experience in the service center. Can perceive it like universal repair manual almost any machine for soap bubbles Firms Antari, Involight, Ross, Lexor, MLB, American DJ and others. Here we go.

Soap bubbles small and rare. This malfunction occurs due to the non-optimal speed of rotation of the wheel and the air flow from the fan. Most likely, the voltage in the 220 volts network does not comply with the requirements of operation. Most often it is understated or unstable. It is better to turn on the soap machine in this case through the stabilizer or enter the fan speed adjustment to adjust the supply voltage of fans for specific conditions.

2nd place

Small ditch of soap bubbles. Soap bubbles can fly close, unless they work or broken fans lifting bubbles. Usually they stand below the pallet with a soap mixture and blow up and forward in the direction of the bubbles. Most often, bearings are clogged in the fans. So you have to disassemble them, clean and lubricate thick lubricant. If the windings or electronics of the fans burned from the voltage drops, then you will have to buy new fans for soap machines.

3rd place

Soap bubbles burst quickly. The reason for this may be a bad composition of a soap mixture or too high speed Air stream for blowing soap bubbles. It is necessary to replace the soap mixture and adjust the speed of rotation of the fans using the power regulator.

4th place

Foam is formed and bubbles do not fly. In the article and in the video described such a case - this happens if you confuse the polarity of the drive engine drives of two-wheeled soap bubbles. The wheels rotate towards each other and just whip the soap mixture in the foam. Check the polarity of the engine connection and enjoy a soap show.

5th place

Worsening work with time. This happens if your soap bubbles generator worked in harsh operating conditions and could be covered with dust and soot. It often rusts, dry and clogged with dust of the fans bearings. In the power supply of a soap car can dry electrolytic capacitors. Because of this, the drainage drawdown of fans and engines is likely.

Master soldering with you.

Creating your own machine (generator) for the manufacture of soap bubbles is a really lightweight and cheerful occupation. It can be made of anything (well, or almost), twisted or glued and the final result will amaze your children with hours.

Based on basic principles Electronics, which is only a motor and fan This unit is very convenient as the first similar experience. I did this car using my free minutes during the week. The most time has been waiting for the ordered centrifugal fan. During the best part of the test, a grandiose mess was created, while I did not realize that the most suitable place to test this car is a shower.

My generator for the manufacture of soap bubbles was made to entertain my little daughter. She loves bubbles, but now is at that age that to blow her with her very problematic (not to mention the fact that it will be dirty). She spent the happiest 15 minutes, she ran through bubbles and ran around them on the street. After that, adults began to experiment with heated bubbles to view changes in sizes, speed and height of the bubble flight, as well as began to use other ways to change the final bubble in order to identify the patterns and manufacture of better quality bubbles.

In order for other people to be easier to make a copy of my generator, I decided to simplify the presentation of the process of its manufacture and allocated five main components, which it consists of. Of course, it is conditional, and you can do the way you are comfortable. Here I give information about what actions and what instruments and materials I apply.

Trough: From here will be taken material for the manufacture of bubbles. It should be waterproof and not too small, that's all.

Disk for bubbles: The disk with the holes that will rotate slowly, plunging into the trough and rising from there ready for the release of bubbles through the holes. After lifting from the trough, the holes are moved to the fan, which, in turn, by the jet of air forms bubbles.

Traffic: To rotate the disk for bubbles, you need a motor at low speed. Best option There will be an engine with a continuous servo.

Fan: Anything is suitable with a mesmer jet of air. It blows a bubble from the hole from the hole in the ring. I used a centrifugal fan voltage 12V.

Energy:Power supply to rotate the ring and feed the fan.

You will also need nuts, bolts, hot glue or superclauses to connect all the details together.

Corto can be cut out of the box for milk, from plastic container for storage of food and other such materials. I did it most convenient for myself using computer program CAD I. laser Machine, most people do not have such tools.

The only thing you must take into account when choosing a material for trough - it must hold the fluid inside and the motor with a servo will be strengthened.

I cut out the laser of the Orange acrylic thickness of 1/8 inches and, using the superclauses connected all the details together. To ensure waterproofability, I fastened outside the place of possible packing tape. I also took into account and provided a few slots for fastening my servo.

Disk for blowing bubbles.

You will need some item that would take the liquid from the gutter and joined it by the fan. There are many ways to improve the disk design in order to increase the ability to transfer the bubble source liquid, but I did not do this.

The holes in the disk were cut out of the acrylic thickness of 1/8 inches. 16 holes were uniformly cut on a radius of 6 inches. Each hole has slits in order to keep more liquid. There are holes in the center of the disk to set a standard servo on it with screw screws.

Then you will need a mechanism that rotates your disc for blowing bubbles in the very trough. You need the engine to which you can attach this disk.

I used a modified servo for this, from perfectly approached for slow rotation and was powered by electricity from two AA batteries. You can easily find information how to modify the servo so that it does not require to control the control signal. You can also use any suitable engine from the electronics store or even standard LEGO engines.

Fan.

I applied the fan that ordered myself for $ 5. It works from voltage 12V and has a performance similar to the standard fan used in a personal computer, however has a much smaller area. The best mode for it was to work with a voltage of 12V.

You can even use a household hairdryer in the use mode without heating the air with a small conical nozzle. I do not recommend applying a vacuum cleaner in reverse mode, since I myself tried to use it, he made a big mess in my office when I turned it on :)

The required power will depend on which motor and disc for blowing bubbles you will choose. I used 2 AA batteries for servo and battery from rechargeable drill Power 12 V for fan.

What mechanisms you choose and will be a determining factor, which battery or adapter you will need.

Here it is shown how to collect all the details together.

Photo 1: The servomotor is attached to the trough and fixed on it with two m4 screws with nuts. The container for two AA batteries with hot glue is glued to the trough, the wires to them are soldered and are extinguished.

Photo 2: The bubble-forming disc is fastened with 4 screws-screws to the servomotor. Please note how close to the bottom of the chute drive. This is done so that the disc can be moistened with liquid even with a very small number of last.

Photo 3: Rear view on the ring and servo.

Photo 4: The centrifugal fan is glued to the rear of the gutter and oriented so that the outgoing nozzle is directed to the holes in the disk. Before gluing, test the fan and find him best place. where its location will contribute to the generation of bubbles higiful quality. I found a position in which bubbles took off up. When testing, I used energy from the network, when using the unit, an accumulator from a voltage drill was used in the street conditions.

As you can see, I got a lot of pleasure in the manufacture and use of your bubble-forming machine. It began as a way to entertain babies, and ended with the entertainment of businessmen in the business center of San Francisco, when we blew bubbles near the fire stairs on the balcony.

The battery from the battery drill provides enough energy to my unit, it easily copes with the task and besides it very easy to recharge, which is more convenient than carrying out the extension from the outlet.

I used a 1/2 ratio detergent For dishes and 1/2 volume of water. This 50:50 ratio is enough to generate high-quality bubbles, although some people recommend adding glycerin's tablespoon to trough.

When children bubbles bubbles, adults start playing themselves! It turns out that it is possible to heat the air serviced in the fan, and also to change the expiration rate of the air jet of the fan and produce other actions, and receive a lot of pleasure.

WRITE A COMMENT

We need:
- bottles for soap bubbles;
- Motor;
- Wooden plank;
- electrolovik;
- steel wire;
- fan;
- Rectangular Capacity

First, take the bottles for soap bubbles, from which we need only rings through which soap bubbles are inflated. All such rings need eight.

We also take the lid from one bottle and we do 8 holes in it across the entire circumference.

In the well-done holes, we have rolled the rings from soap bubbles.

We will need any motor that will turn the design of the lid and rings.

Also for a motor need to make a small rack from wood plank. To do this, cut out the bar of a certain length and in the upper part we do the hole along the diameter of the motor housing.

Fix the motor in the hole.

Next, we take steel wire and bend it as shown in the figures below.

Fix the bent wire on the rack with the help of screws.

Now you need to choose a suitable fan that will constantly blow on the rings. To do this, you can use a cooler from the computer or make a fan yourself, as the author of the self-catering makes.

If you also decided to make a fan itself, you will need a motor and a plastic bottle. Of plastic bottle It will be necessary to cut two blades and combine them with each other with a piece of plastics. Finally, the design of the blades will need to be fixed on the shaft of the motor.

Take adhesive Pistol and glue the fan to the base of the wire.

The next step takes any rectangular container and glue the rack in the center of this tank.

Now, with the help of hot glue, we will put the design of the rings and the cover on the shaft of the main motor.

The next step must be connected to the structure to power. To do this, take two old chargers from mobile phones And connect them to the motors.

If earlier children blown out soap bubbles just for entertainment, today the newest technologies have turned this process in the children's show of soap bubbles, which with incredible ideas pleases not only small, but also adults. Magic spectacle from soap bubbles can even be ordered for a celebration.

The soap bubble consists of a thin film of soapy water, which is filled with air. The bubble lives only a few seconds, but carries a large charge of positive. To prolong this time and arrange a holiday for children, you can use the soap bubbles generator. To do this, the soap solution is poured into the generator separation. The air coming from the car conjures a soap solution to moving stencils, of which multicolored soap bubbles are obtained.

Bubbles generators are two types: suspended and outdoor. They are managed remote remote control And facilitate the process of blowing. Holes in spinning stencils are from 3 cm to 15-20 cm. When choosing a generator, find out from the seller, leaves fluid spots on clothes and the degree of its quality. The generator can be selected for small premises Or for kindergartens, schools and premises for large holidays.

If you decide to make an extraordinary surprise for your baby, you can order a show from soap bubbles in the Kingdom of Miracles agency. The agency not only holds a show on high levelBut also selects suitable artists, relevant music and holiday design. And in additional services also includes cakes to order and chocolate fountain.

Imagine your attention a description of several types of generators for the production of soap bubbles.

Bubblemaster

Bubblemaster with high performance produces soap bubbles with four types of fans with different speed Rotations raising bubbles very high. This newest technology Creates hundreds of soap bubbles in one minute. This generator produces long-playing bubbles. It can be used for holidays on open air or Events in a closed room. Special formula of soap substance is non-toxic and does not paint clothes. The generator has an accurate time sensor that allows you to monitor the generator operation process. Soap bubbles will make an unforgettable wedding celebration, prom, New Year's party and birthday.

BUBBLE MASTER BM-2000

This powerful generator produces up to 15 thousand bubbles per minute. It instantly fills the room with cascades from bubbles. The car has a plastic case very durable and installed on a rotating stand. The speed of the built-in fan is adjustable, while setting the production rate and the size of soap bubbles. Soap bubbles aimed. It has a four-grade built-in container, as well as a gas station system.

BUBBLE MASTER BM-500 (DMX)

In this unique device, 4 double-flux wheels are built-in, which produce a powerful stream of soap bubbles, which is sent to 3 fans placed in the generator body. The device has a DMX module, and its kit includes a wireless control panel. The volume of the reservoir is 1.5 liters, the flow rate in 20 minutes - 1l. Soap bubbles generators are quite simple to use and do not require special skills to control.