Danfoss temperature relay (Danfoss) temperature temperature - thermal switches. Electronic temperature relays (thermostats) Danfoss RT, Danfoss Teroreare
Group temperature relay It includes both products of general industrial appointment and specialized relays for those applications where elevated requirements are presented.
RT, Termaire Danfoss
Termaire type RT. Designed for industry and shipbuilding.
RT temperature relay series includes conventional room thermostats, Relays with remote sensors, as well as relays with insensitivity zone. RT thermostats are usually recommended for those applications where decisive factors are safety or efficiency.
RT relays are operated for over 60 years.
· Temperature ranges: from -60 ° C to 300 ° C
· System of replaceable contacts
· Fail-tolerable
· Differential customizable value
· Protection class IP66
· On request comes with a manual reset to a minimum or maximum (IP54)
· On request comes with the insecurity area
RT, thermal switches 
RT, thermal switch with room sensor
Specifications The temperature relay RT101 RT2 RT3 RT101 RT4 RT106 RT7 RT108 RT8 RT10 RT10 RT11 RT12 RT13 RT14 RT15 RT17 RT34 RT107 RT102 RT103 RT26 RT115 RT120 RT123 RT115 RT23 RT8L RT14L.
|
Code for order |
Range pace. |
Diff. @ Min. |
Diff. @ MAX. |
Max. pace. Sensor |
Cap a tube |
Purpose Control. |
Sensor Size. |
||||
|
Remote Sensor |
Singo-pole |
- | |||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
|
Room |
- | - | - | ||||||||
|
Remote Sensor |
- | ||||||||||
| - | |||||||||||
|
Singo-pole |
- | ||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
|
Room |
- | - | - | ||||||||
|
Remote Sensor |
- | ||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
|
Room |
- | - | - | ||||||||
| - |
Singo-pole |
- | - | ||||||||
|
Remote Sensor |
- | ||||||||||
| - | |||||||||||
| - | |||||||||||
|
Capillary. |
- | ||||||||||
|
Room |
- | - | |||||||||
|
Remote Sensor |
- | ||||||||||
|
Room |
- | - | |||||||||
| - | - | - | |||||||||
|
Remote Sensor |
Singo-pole |
- | |||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
| - | |||||||||||
|
Singo-pole |
- | ||||||||||
| - |
KPS, Danfoss Teroreare
In the KPS temperature relay series, special attention is paid to satisfaction. important requirementsrelating high level protection, durable and compact design, as well as impaired and vibration resistance. The KPS series meets the requirements that are presented to most installations. open airand indoors; It is suitable for use in monitoring systems, alarm and regulation at factories diesel installations, compressors, power plants, as well as on ships.
· Temperature ranges: from -10 to +200 ° C
· Systems with gold-plated contacts
· Custom or fixed differential
· Vibro- and impact resistance
· IP67 protection class. Strength and resistance in relation to sea water.
KPS, thermal switches with capillary tube
KPS, thermal switch with hard sensor
KPS, thermal switches with armored capillary tube
Specifications Temperature Relay KPS77 KPS79 KPS81 KPS83 KPS76 KPS80
|
Code for order |
Range pace. |
Differential |
Max. pace. Sensor |
Cap a tube |
Purpose Control. |
Ambient |
Sensor Size. |
|||
| - |
Remote Sensor |
Singo-pole |
||||||||
| - | ||||||||||
| - | ||||||||||
| - | ||||||||||
| - | ||||||||||
| - | ||||||||||
| - | ||||||||||
| - | - | |||||||||
| - |
Remote Sensor |
|||||||||
| - | - | |||||||||
| - |
Remote Sensor |
|||||||||
| - | ||||||||||
| - | ||||||||||
| - | - | |||||||||
| - | - | |||||||||
| - |
Remote Sensor |
|||||||||
| - | - | |||||||||
| - |
Remote Sensor |
CAS, Danfoss Teroreare
Cas, thermal switches
In the series cas temperature relay Particular attention is paid to the satisfaction of the requirements relating to the high level of protection, durable and compact design, as well as impaired and vibration resistance.
The CAS series meets the requirements that are presented to most installations operating both outdoors and indoors. Thermaline CAS is suitable for use in emergency signaling and monitoring systems at factories, diesel installations, compressors, power plants, and on ships.
· Temperature ranges: from 20 ° C to 150 ° C
· Microswitch with fixed small differential
· IP67 protection class. Strength and resistance to sea water
· Durable compact design
· Vibro- and impact resistance
· On request comes with all relevant permissions for use on land and in marine conditions
· On request are supplied as 2-speed thermosleres (see 2-speed Cas)
Specifications of the temperature relay CAS-178
KP, Danfoss Termorer
KP temperature relay Danfoss was used for regulatory, control and alarm systems in industrial installations. The KP temperature relay is an automatic relay, the position of the contacts of which depends on the temperature of the monitored medium. These devices are equipped with a single-pole switch into two directions (SPDT) and can directly control the operation of single-phase AC motors with a capacity of up to 2 kW.
· Temperature ranges: from 0 ° C to 150 ° C
· High load capacity of contacts - the ultrashort of the rattling of contacts
· On request comes with gold-plated contacts
· IP44 protection class when installing with a protective overlay and rear shield
· By order for customer-suppliers of complete equipment, it also comes with IP55 class protection
· Small sizes - saving space - ease of installation
· Resistance in relation to shock and impact
KP thermal switches
KP pressure sensors and thermal switches of the UL family approved NPT Connection
KP79 UL thermal switches approved by NPT Connection
KP75 thermal switch with room sensor
Specifications Temperature relay KP61 KP71 KP75 KP77 KP81 KP79 KP81 KP78
|
Code for order |
Range pace. |
Max. pace. Sensor |
Cap a tube |
Purpose Control. |
Ambient |
Sensor Size. |
|||
|
Capillary. |
Singo-pole |
||||||||
|
Remote Sensor |
|||||||||
|
Channel sensor |
|||||||||
|
Remote Sensor |
|||||||||
|
Room sensor |
- |
Singo-pole on two |
|||||||
|
Remote Sensor |
Singo-pole |
MBC 8100, block-type DANFOSS compact Danfoss thermal, allowed to use on ships
MBC 8100, block-type compact thermal switches made to applications on ships
MBC8100 temperature relay used on maritime courts where the most important characteristics are saving place and reliability. MBC is compact temperature regulators developed in accordance with our new block concept and withstanding hard conditions, ordinary for shipping branches. MBC relays have a high vibration resistance; All generally accepted permits for use in marine conditions are available for them. The fixed small value of the differential ensures the accuracy of the relay operation. Products without certification for maritime courts are also offered (MBC 8000; For information, contact Danfoss)
· Block design
· Fully electromechanical
· Temperature range from -200 °
· On request comes with all relevant permits for use in marine conditions
· Designed for the implementation of strict requirements for the equipment of maritime courts
Specifications of compact block temperature relays made to use on MBC8100 ships
|
Code for order |
Range pace. |
Differential |
Max. pace. Sensor |
Cap a tube |
Purpose Control. |
Ambient |
Sensor Size. |
|||
|
MBC-8100. |
- |
Singo-pole |
||||||||
| - | ||||||||||
|
Remote Sensor |
||||||||||
Temperature relays (thermostats) with an adjustable zone of the KP type differential are used to regulate, monitor and emergency signaling in industry. Relay
Temperatures (thermostats) are equipped with single-pole switches, which closure or open the electrical circuit when the temperature changes compared to the specified one.
The position of the switch depends on the value of the relay installation and the temperature of the sensor. KP thermostat can control AC motors to 2 kW.
Temperature range: from 0 ° to 150 ° C
Very small response time
Option with gold-plated contacts
IP44 Case Protection Class when mounting with top lid and rear board
IP55 Case Protection Class for Serial Equipment Manufacturers
Compact sizes save space
Easy mount
Resistance to impact and vibration
Specifications
| A type | Kp. | ||||||||||
| Temperature ambient ° C. | -40 ° C ... +65 ° C (for a short period to +80 ° C) | ||||||||||
| Sensor material | CU / SN5 (tin copped) | ||||||||||
| Permissible electrical load on the contact system from AGCDO (silver alloy) | Alternating current | 16A, 400V. | |||||||||
| 16A, 400V. | |||||||||||
| 10A, 400V. | |||||||||||
| D.C | 12W, 220V. | ||||||||||
| Alternating current | AC-1 | ||||||||||
| AC-3. | |||||||||||
| AC-15. | |||||||||||
| D.C | DC - 13. | ||||||||||
| By curve, the maximum allowable load is determined. Shaded zone in denotes permissible load For gilded contacts. | |||||||||||
| Cable connection | Cable dia. 6 - 14 mm | ||||||||||
| Vibration resistance | When installing on the wall bracket, vibration is allowed in the range of 0 -1000 Hz, 4 G (1 G \u003d 9.81 m / S2) | ||||||||||
| Installation on the corner bracket is not recommended in places where vibration is possible. | |||||||||||
Nomenclature of standard types
| Code number | A type | Setting range, O With | Differential, about with | Max temperature, about with | The length of the capillary tube, m | Material contact | |||||
| 060L121266. | Kr75. | 0 - 40 | 3 - 10 | 80 | Comn. sensor | AG | |||||
| 060L118466. | Kr78. | 30 - 90 | 5 - 15 | 150 | 2 | AG | |||||
| 060L112666. | Kr79. | 50 - 100 | 5 - 15 | 150 | 2 | AG | |||||
| 060L116966. | Kr79. | 50 - 100 | 5 - 15 | 150 | 5 | AG | |||||
| 060L112566. | KP81 | 80 - 150 | 7 - 20 | 200 | 2 | AG | |||||
| 060L118366. | KP81 | 80 - 150 | 7 - 20 | 200 | 3 | AG | |||||
| 060L117066. | KP81 | 80 - 150 | 7 - 20 | 200 | 5 | AG | |||||
| 060L115566. | KP81 | 80 - 150 | 8 (manual reset) | 200 | 2 | AG | |||||
Accessories
| Name | Description | Number in box | Order code |
| Montaja brackets | Wall Bracket | 10 | 060-105566 |
| Angle brace | 10 | 060-105666 | |
| 4 screw M4 * 5 + 4 washers | 1 set | 060-105466 | |
| Cable input with thread | RG 13.5 with nut for cables with a diameter of 6-14 mm | 5 | 060-105966 |
| Seal | Protection of changes to settings | 20 | 060-105766 |
| Top cover | IN standard equipment The device has a degree of protection IRZZ, when installing the top cover, the degree of protection Increases to IP44 |
10 | 060-420166 |
| Protective cover | To protect the device from drops of moisture and humidity. Degree of protection IP44. | 1 | 060-003166 |
| Slip seal for capillary Tubes |
Gasket from oil resistant rubber (Max. Temperature 110 ° C, Pressure - 90 bar) |
5 | 017-422066 |
| Fasteners for capillary tube and thermobalone | Set for mounting capillary tube and thermobalone on the wall | 20 | 017-420166 |
| A pen | Installed on a standard screw setting | 20 | 060-106366 |
| Thermobalone sleeve | The sleeves are suitable for all KP thermal stoves with a cylindrical sensor. The kit includes sleeves and seals. Attaching G ½. Max. Wednesday temperature - 250 0 S. |
||
Length 112 mm |
1 | 017-437066 | |
| Gelza Is. of stainless steel, inner diameter 9.6 mm, outer 11 mm, length 112 mm | 1 | 017-436966 | |
| Latvian sleeve, inner diameter 9.6 mm, external 11 mm, Length 465 mm |
1 | 017-42166 | |
| Thermal conductive aluminum pasta | Used for thermostats with sensors installed in sleeves. For temperatures from -20 to +150 0 s (briefly up to 220 0 s) |
||
| Tube (weight 5) | 1 | 041E0110 | |
| Bank (weight of 750) | 1 | 041E0111 |
dimensions
Device device
1. Spindle temperature settings
2. Spindle Installation Differential
3. Main lever
7. Basic spring
8. Differential spring
9. Silphon
12. Contact
13. Clem panel
14. Ground terminal
15. Cable input
16. Tumbler
17. Sensor
Sensitive element
The sensitive element is filled with superheated gas and a solid with a large absorption surface. The solid is concentrated in the sensor (17), and therefore it is regulating
Temperature part of the thermostatic element. The sensor can be placed in a warmer or colder mode than the thermostat and capillary tube. However, putting it in the environment
The temperature is higher or lower than +20, accuracy may change. 
9. Silphon
19. Capillary trumpet
17. Sensor
High quality Danfoss products
Danfoss is a world leader among frequency and devices converter manufacturers. smooth start And continues to increase its presence in the market.
Relay danfoss temperatures KP61-3.Temperature relays with adjustable Differential type KP type is used to regulate, control and emergency signaling in industry. The KP type relays are used mainly to control the temperature, but can also be applied as protection devices.
The temperature relay KP61.2 is available with the thermoelement steam filler. Used in ventilation as safety devices protection against freezing.
- Ambient temperature -40 ... + 65 ° С
- Treatment temperature -30 ... + 15 ° С
- The length of the capillary tube - 3 m
- High Load Contacts - Ultrashort Time Daveg Contacts
- On request comes with gold-plated contacts
- IP44 protection class when installing with a protective overlay and rear shield
- Small Sizes - Saving Places - Ease of Mounting
- Staff persistence and impact
CR - electromechanical thermostats with a variable differential, intended for controlling the temperature of liquid and gaseous media, as well as alarms in various industrial installations.
Thermostats of the Kyrgyz type apply- in the air heater protection circuit ventilation unit From freezing when the air temperature drops in the heater tubes below the critical value;
- to turn on and off circulating pump in gVS system building;
- as a protective thermostat that excludes a breakthrough of the superheated coolant into the heating system, etc.
The thermostat is equipped with a single-pole switch (SPDT), the position of which depends on the thermostat setting and the temperature of the sensor. A variable-to-2 kW motor can be directly connected to the switch contacts. With more powerful engines or DC motors The thermostat is installed in their control circuits.
NomenclatureTemperature relay (thermostats) KP61 (KP61-2, KP61-4, KP61-6, KP61-11.5 Capillary Length) with a direct capillary tube
Temperature relay (thermostats) KP71, kr75, kr81 with thermobalone (remote sensor)
Temperature relay (thermostats) KP98 Doubled with thermobalons (remote sensor)
Basically, the KP temperature relay is used to maintain set temperatureBut can be applied both as protection devices. Temperature relays are available with steam and adsorption filler thermobalon. The thermostats with adsorption filler are widely used as safety devices from freezing.
- Medium temperature: -40 ° C ... + 65 ° C (within 2 hours to + 80 ° C).
- Contact Group: single-pole two-position (SPDT)
- Cable entry:
- for wires section 6 - 14 mm: pg 13.5
- for wires section 8 - 16 mm: PG 16 - Case protection: IP 30. Special cover must be ordered for IP44
- AC1: 16 A, 400 V
- AC3: 16 A, 400 V
- AC15: 10A, 400 V
Maximum starting current (LR): 112 A, 400 V
- DC13: 12 W, 220 V (current in the control circuit).
Certified Supplier
The company's technology is the official certified Danfoss dealer in Russia, which guarantees the authenticity of the supplied equipment!
On request, we supply any products of Danfoss.
Complete set of object or selection of analogs
The guidance of the timeliness of equipment supply is a high-quality organization of the supply system and cooperation with an experienced, reliable partner. If you need to calculate the project (specification) or select analogues to the cheapening of the object, please send your request to our specialists in the shortest time will prepare a price offer within the budget of the laidden and with the lowest possible advances!
Our company is authorized to supply, installation, service maintenance, Warranty and post-warranty repair by qualified employees, ensuring reliability, efficiency and safety of systems operation.
In the technology of the house, a team of certified specialists who have undergone training training in the University of Climate.
Temperature relay Danfoss KP61-3.used for regulating, control and alarm systems in industrial installations. The KP61 temperature relay is an automatic relay, the position of the contacts of which depends on the temperature of the monitored medium. These devices are equipped with a single-pole switch into two directions (SPDT) and can directly control the operation of single-phase AC motors with a capacity of up to 2 kW.
- Temperature ranges: from 0 ° C to 150 ° C
- High Load Contacts - Ultrashort Time Daveg Contacts
- On request comes with gold-plated contacts
- IP44 protection class when installing with a protective overlay and rear shield
- By request for customer-suppliers of complete equipment, it also comes with IP55 class protection
- Small Sizes - Saving Places - Ease of Mounting
- Staff persistence and impact
Thermostat KP61-3 is an electromechanical thermostat with a variable differential, designed to regulate the temperature of liquid and gaseous media, as well as alarms in various industrial installations.
Thermostat type KR is used:
- in the flow chart of an air heater of the supply ventilation plant from freezing when the air temperature drops in the heater tubes below the critical value;
- to turn on and off the circulation pump in the DHW system of the building;
- as a protective thermostat that excludes a breakthrough of the superheated coolant into the heating system, etc.
The thermostat is equipped with a single-pole switch (SPDT), the position of which depends on the thermostat setting and the temperature of the sensor. A variable-to-2 kW motor can be directly connected to the switch contacts. With more powerful engines or DC motors, the thermostat is installed in their control circuits.
Characteristics :
- Medium temperature: -40 ° C ... + 65 ° C (within 2 hours to + 80 ° C).
- Contact Group: single-pole two-position (SPDT)
- Contact load, alternating current (AC):
- AC1: 16 A, 400 V
- AC3: 16 A, 400 V
- AC15: 10A, 400 V
Maximum starting current (LR): 112 A, 400 V - Contact load, d.C. (DC):
- DC13: 12 W, 220 V (current in the control circuit). - Cable entry:
- for wires section 6 - 14 mm: pg 13.5
- for wires section 8 - 16 mm: PG 16 - Case protection: IP 30. For IP44, a special cover must be ordered.
Reviews
Leave your product review - Temperature relay (060l126766) Danfoss KP61-3
Leave your feedback on the product
Top popular products
|
|
|
Why you can not give icons
Is it possible to give icons as a gift: Signs, the opinion of the Church
A year ago left her husband, and now I do not know what to do