How many plastic bottles do you need to make a palm tree. Do-it-yourself palm tree from plastic bottles in stages with photos and videos. How to make a palm tree from bottles with your own hands

School of practical people. Master class making a beautiful and beautiful palm tree with your own hands from plastic bottles.
New technologies and innovations bring a lot of good things to people's lives, make it easier and more beautiful. But with this new thing, something bad comes into our lives.
A plastic bottle is an example of the above. This thing was developed in 1941. The plastic bottle has conquered the whole world. It is very popular for a number of its positive qualities:
- cheap material
- very technical
- ease of operation,
- can be reused at home.

Unfortunately, the plastic bottle also brought bad moments:
- the period of decomposition in natural conditions is more than 100 years,
- during decomposition and combustion, dangerous and harmful substances are released.

Over the past holiday season We have a lot of plastic bottles in our family. In the fall, they began to think about where to throw them away, how to take them to a landfill. The youngest daughter came up with a brilliant idea to leave plastic bottles at home and make something beautiful and original.
Everyone liked the idea of the daughter. On the Internet, we reviewed a lot of crafts. We settled on the idea of making a palm tree.

Stage #1
Collect as many plastic bottles as possible. The color is green (from under the Sprite). The color is dark brown (from under Kvass or Beer). A huge amount is needed. Immediately ask for help from neighbors and friends. You will certainly be helped in difficult endeavors.

Stage #2
Think carefully about what height and size your palm trees will be, how many palm trees will be, where you will install.
We, personally, to begin with, make one tall palm tree.

Stage 3
We tear off all stickers and product labels. Rinse dirty plastic bottles gently in hot water.

Stage 4
Sorting plastic bottles. So it will be easier and more comfortable to work. We start with brown bottles. Set aside the green ones, let them not interfere. We will use them later.

Stage number 5
Let's start making a powerful and reliable trunk. We take plastic brown bottles. Carefully cut off the bottoms of the bottles. Then we take a drill with a nozzle. We make holes in the center of the bottoms on a hard surface. We take armature. We string the blanks on the reinforcement one by one.

Stage #6
We bring green bottles from the warehouse. From them we will make the leaves of our exotic palm tree. For this procedure, we need sharp scissors and a knife. Carefully cut off the bottom of the plastic bottle. Throw away. Cut the rest into long strips.

Stage number 7
We mount and securely fix the workpieces on iron fittings. The length of the fittings depends on the number of bottles and the size of the palm tree.

Stage #9
Final stage. We securely install all structural elements. Iron fittings are securely fastened to each other. We invited a welder neighbor. Five minutes of work. There she is. Our beautiful palm. Reliably mount finished structure. Pour cement mortar into the pit, install a palm tree, fix it with twine.
Our family decided that three gorgeous palm trees will soon grow in front of our house. We have the Bahamas all year round. See photo No. 8. Our palm trees delight all neighbors, make them stop all pedestrians and drivers, take pictures of beauty and tell friends about a miracle!!!

Together with my son, we agreed to make a palm tree out of plastic bottles for the garden. It turned out that there are a considerable number of ways to implement the idea. Wanting to get the best copy, we tried several assembly schemes exotic plant, about which we will tell.

Starting the installation of a palm tree from plastic bottles, we fully felt the main problem: a huge amount of packaging is needed! It should be borne in mind that all this bottled abundance must be washed, cut and collected with your own hands. My son got blisters from scissors. In the process of work, three ways of solving the problem were found:

make a small tree
use technology with less material;
paint transparent bottles.

This has all gone through our hands several times.

As a result, we decided to make a medium-sized tree. Painted only three bottles. We achieved the use of containers almost without scraps, that is, by 90%. For the whole product, 35 brown and the same number of green plastic bottles were spent. We give a description of the creation of what you see in the photo, as well as do-it-yourself assembly schemes for a small and large tree. We made a little man under a tree from plastic bottles earlier.

Man-made palm tree and "local resident", created earlier

Assembling the trunk for a medium-sized palm tree

Let's start assembling the tree from the trunk. It will require a metal tube, which in diameter easily passes into the neck of the bottle. The tube should be 50 cm longer than the palm tree: this part will be in the ground.

We used the entire 150cm tube to assemble the barrel. For installation on the ground, reinforcement 1 m long was hammered into the ground by 50 cm, on which they put a tube load-bearing structure palm trees. The following is a step-by-step instruction and a scheme for assembling crafts for a garden. The step numbers here and below correspond to the numbers in the pictures:

The result is a palm tree trunk. The diameter of the tree is not the same due to the use of different bottles, but in nature it happens.

small palm tree trunk

We know that there are uneven protrusions of the remnants of branches on the surface of the palm tree. At a short distance they are clearly visible, so for a small tree better fit stem of a different design.

A small palm tree may have a different trunk design.

A small palm tree can be installed in the country house right next to the wall of the house. In this case, you need to perform the following steps step by step:

Technology for manufacturing a trunk for a large palm tree

There is a third way to make a palm tree trunk. If we want to make a large tree for the dacha, close in size to the natural one, the examples already considered will not work because of the disproportionately small diameter of the trunk and the fragility of the structure. In this case, you will have to cut off the lowest parts of the plastic bottles, and then drill them and fasten them with screws or nails to the log. Of course, you will need a lot of containers.

The option of manufacturing a barrel of natural sizes

Master class for making a crown for a medium-sized palm tree

Now let's deal with the crown of an exotic tree. For its assembly, we also chose a design with full use of plastic bottles. The bottles are different, and we have previously divided them into five groups for the five branches of the tree, trying to ensure that all sets are approximately the same. To assemble the crown, you need to follow these steps step by step:

Like the trunk, the crown of a palm tree can be made different ways. Very convenient to choose required option based on the size of the tree. Returning to a medium-sized sample, you can make a more fluffy crown. However, in this case, you will have to cut the bottles in increments of 5 mm, that is, do it yourself three times as much work. In addition, in this case only the top third of the bottle is used, which will require three times the amount of starting material.

We make a crown for a small tree

Now we give a master class for making a crown for a palm tree small size. This craft is good for beginners. In this case, it takes noticeably more time to work with each detail, but noticeably fewer bottles are required, and the crown of the tree will have a more natural look at a short distance to small tree.

Such a crown will require only a few bottles. Step-by-step instruction will be as follows:

Other options for making an artificial tree crown

Variants of palm tree crowns with various leaves

Note that palm leaves can be cut using a different pattern. If you wake up your imagination, you can come up with something new and make your own palm tree from plastic containers.

Please note that for the manufacture of a large tree, the crown shown in the photo below is a good fit.

Already having some experience, we understand that this option will require a large number source material. As you can see, only the lower parts of completely identical bottles strung on wire are used here.

So that the individual links do not fit into each other, the upper part of each blank is cut and bent inward.

We hope that you will get the best palm tree from plastic bottles. The video below will help you clarify the missing details.

Do-it-yourself palm tree for decorating the site can be made not only from plastic bottles or old tires, but also from other cheap materials. Ideas for the garden in this regard are very loyal.

One of the options is an ornamental palm tree, the trunk of which is built from flower pots, and the foliage at the top of it is a pot with a large ornamental leafy plant.

Materials for creating a palm tree

Flower pots - 10-12 pieces. The more pots, the taller the tree will be. Pots should be the same model, but different in size;
metal pipe;
plant pot.

How to make a palm tree with your own hands - step by step

We fix the metal pipe in the ground. This is the basis for the trunk, and the trunk must be stable, as it will be hoisted big pot with a plant. You can take a very long pipe and stick it deep into the ground, but it will be more reliable to concrete it.

We dig a narrow, but deep (50-60 cm) hole, pour crushed stone, install a pipe, add crushed stone to ground level and fill it with a solution (cement + sand + water). The solution must be liquid to fill the gaps between the rubble pebbles.
We prepare the pots - we drill a hole in each with a diameter slightly larger than the diameter of the pipe. If the pots are clay (ceramic), we use a ceramic drill for drilling. You can make several holes with a thin drill in a circle, and then squeeze out the middle. But it is best to immediately take a “crown” drill of a suitable size. Make holes in the bottoms plastic pots It is not difficult: they can be both drilled and cut.
We string the pots upside down on the pipe. We put bigger pots down, smaller ones up.

At the very top we place a pot of such a size that it fits a flowerpot in which the plant grows. Well, if it is deep.
We put the pot with the plant in the flowerpot. Between the walls, you can lay some material, for example, tightly push the film, oilcloth, put spacer sticks. All this is to fix the flowerpot in the pot.

Do-it-yourself palm turned out to be tall, beautiful and truly exotic.

What plants to use for a homemade palm tree

We choose large plants with long leaves that resemble the leaves of real palm trees. There are many such plants - both indoor and outdoor. By the way, indoor plants in the summer it is very useful to "live" on the street - under the sun, on fresh air. Until the autumn cold, they will improve.
Ferns - nephrolepis, davallia, asplenium, bracken, shield

Chlorophytum

This is the only one that can grow in our gardens.

Leave your feedback

Any garden will seem unusual and original if you plant a palm tree there. However, in our climate, this idea is impossible - a tropical plant obviously will not survive the winter. An alternative would be a plastic palm tree. The product is not afraid of frost and does not need to be watered.

DIY materials

There are several ways to make a palm tree from plastic bottles, and each uses the same components:

Plastic bottles are brown and green. Better two or one and a half liter.
Scissors.
Tape or glue.
A long, straight stick that will be the base - iron, plastic or wood.
Small wires or twigs for palm leaves.

Stages of product creation:

Wash and clean bottle labels.
Make leaves.
Make a tree trunk.
Fasten the leaves to the trunk and set in the yard.

it short description upcoming actions. Below are some instructions for beginners. Everyone will be able to choose which palm tree will look best in the yard.

First way

Making leaves

Green bottles are cut in half. You only need the part with the neck. A narrow section of it remains intact, and the rest is cut into many small strips. When a lot of blanks are made, they are all strung on a cable.

It is advisable to fasten them with glue or tape so that they are firmly attached to each other. Leaves need to be made at least 5-6. If you get more, the tree will look even more attractive.

palm tree trunk

The barrel needs brown bottles. cut off Bottom part bottom and the rest of the bottle is used. The process of creating a blank is identical to the first point - longitudinal strips attached to the neck are cut.

However, if in the first case the more stripes, the better, then there should be six of them. The edges are neat, slightly pointed and curl inwards. A lot of preparations are needed. The more details, the longer the palm will be.

It is advisable to select the length of the rod on which they will be strung, but it is important to consider that part of it is dug into the ground.

Foundation preparation

As already mentioned in paragraph two - the rod must be dug in. It should be deep enough in the ground so that the structure does not fall from the wind. Brown details are strung on it. The neck of the first workpiece is slightly buried along with the rod.

We fasten the leaves to the palm tree

The blanks from point one should have wires sticking out of the necks of the bottles. With the help of wires, the crown is tied to the top of the tree.

Second way

The actions are approximately similar to option 1. Only the type of cutting of parts changes, and this also changes the appearance of the product.

In this case, brown bottles are not used completely, but only 1/3 of the bottle (which is near the narrow part). Instead of 6 long strips, 8 short pointed petals are cut out.

To make the palm tree wide and voluminous, the petals should stick out. Due to the lack of materials, the bottom of the bottle can be used in a similar way, but then a hole must be punched in the bottom.

The leaves of this palm tree seem more real. For realism appearance, in addition to green bottles, you can use yellow ones. You can also experiment with leaf sizes. For huge sheets, you can take six-liter bottles, and for small ones, one and a half liter ones.

The bottom of the containers is cut off, and the rest is cut into 3 sheets attached to the neck. The leaves have a longitudinal stem (about 1.5 cm) and the rest is cut into many thin transverse strips on both sides of the leaf stem.

In order to present visually - the leaves will resemble, familiar to many, fern leaves. To make the tree lush, the fringe needs to be fluffed - the strips are bent alternately up or down.

You need to fasten the parts to each other, as well as in the first method.

Third way

The leaves are made from the bottoms of one and a half liter bottles. They are cut, holes are made in the middle and strung on a cable. Such a sheet, on the contrary, ends with a thin part of the bottle.

In this embodiment, a thin base will not work. For the base you need to use a long log. The bottoms are cut off from brown bottles and nailed to the log until they cover it completely.

Description of these 3 ways can give creative people inspiration to create new unusual options. A little tip: leaf and stem ideas can be combined to suit the taste of the garden owner.

In the photo, especially skillfully made palm trees from plastic bottles are surprisingly similar to real ones. The yard in which such beauty “grows” will look like exotic tropics, even in a snowy winter.

Photo of palm trees from plastic bottles

My youngest son, he is seven years old, loves crafting. It does not matter what he works with - a designer, plasticine or cardboard - any craft in his hands turns into something important and useful for him. He especially likes when dad or mom are involved in this process. Of course, we almost never have enough time for such things, but if we get down to business, we work together and bring what we started to the end. The most serious of our collaborations was a palm tree made from plastic bottles.

How to make a palm tree from plastic bottles step by step with a photo

before closing kindergarten for repairs, all parents were instructed to do some crafts. The teacher told me: “Your task for the vacation is a palm tree of bottles.” We scratched our heads and got to work. Collected brown and green flowers, found a pair of long iron bars, cooked drill.

We started with the trunk: the bottom was cut off from each bottle to a height of about 20 cm. The edges were cut with teeth for texture and bent back a little so that it looked like the scales of a palm tree trunk. In each blank, I drilled a hole, the diameter of a long iron rod, which was supposed to serve as the basis for the barrel.

We cut the green bottles in half and cut the edges of each leaf shape. Necks were left on one of the halves, at the ends of the others I also drilled holes that were suitable in diameter.

Having made all the preparations, proceeded to the assembly!

How to attach palm leaves?
We take an elastic rod, not thick, but hard. When we make our leaves for plastic palm, we cut the bottles and insert them one into one, neck to neck, but on the last bottle we leave a cork. We drill a cork and thread a rod, bend the rod at the end so that the leaves do not sleep, that's all.

That's all dear readers, thank you for visiting and reading my site, I advise you to learn how to do