Than to pump an inflatable mattress Intex. Before the disgrace is a simple way how to inflate the mattress if the lungs are not enough

The first inflatable mattresses appeared in 1940. They were made of special fabrics impregnated with a vulcanized rubber. Currently, inflatable furniture is very popular. After all, it is convenient to use in country trains and tourist campaigns. Often it uses as a full-fledged sleeping place in the country. The inflatable mattress does not occupy a lot of space, it is easy to clean and does not require complex care.

Pumps

Dear models possess the built-in electrical pump. But such a complete set is provided for all models. So owners of mattresses have to use foot or manual pump low pressure. Automobile compressor For this process is not suitable. From high pressure The mattress can burst. As soon as the product acquires the desired relief, the process can be stopped.

Security measures

The mattress needs to be entered into a heated room with a temperature above 15 degrees. It must be placed on smooth surface Divided from heat sources. There should be no sharp items on the floor. The bottom of the product is better to protect against possible damage to tarpaulo or foil. On an inflatable mattress should not fall straight sun rays. It is impossible to get up on the product. With increasing temperature, it is better to release some air. Inflatable mattress can not be miseled and exercised.

How to inflate an inflatable mattress without pump

If the pump was not at hand, to pump the mattress, you can use other ways. How to inflate the mattress without pump? The most obvious way is to use your lungs. But for this you need a lot of time and some strong guys. You can use the exhaust pipe of the car. But the exhaust gases are not very useful and capable of damaging the surface of the mattress.

A vacuum cleaner

How to inflate the mattress without pump? With the help of a vacuum cleaner, you can inflate and blow the mattress. Everything is simple here. The thin nozzle from the device joins the hole of the mattress, the vacuum cleaner turns on and inflates the mattress. Do not inflate the product more than 85 percent of the volume.

Fen

The main thing is that the hairdryer approached the inflatable mattress valve. You need to enable cold air mode and pump the product. Hot air can damage the inflatable mattress. This method is effective, but requires some time.

Garbage bag

This method is convenient to use in nature or in the country. It requires a dense package of large volume. It is filled with air and combined with the inlet valve of the mattress. Next, you need to lie on the bag, distilling the air from it into an inflatable product. The procedure will have to repeat several times.

How to inflate the mattress without pump?

As well as traditional options Furniture Today, the inflatable version is quite popular, successfully used not only at home, but also in country trips, in tourist campaigns and in other circumstances. To fully enjoy the comfort of inflatable furniture, you need not only to purchase it. You also need to take care of the presence of a pump.

Some models of inflatable furniture have a built-in pump option, thanks to which the process of giving the mattress necessary forms will pass Without special difficulties. If the device is absent, then the question of how to inflate the mattress without a pump in conditions of home or apartment, you can find an alternative solution. But if the absence of the nanos is found on the lap of nature, then the inflatable furniture will remain in the initial state in the form of a pile of rubberized material.

What can be done?

In order for the mattress to acquire the desired forms without a specialized pump, you can first take advantage of your own lungs. That is, in the presence of significant volume and physical forces - inflation the mattress mouth. In the absence of the above-mentioned criteria, as well as those who carefully relate to their own light and eyes, in which the vessels can burst from voltage, it is worth using the help of a household vacuum cleaner.

For example, you can take a brand of household equipment for cleaning Rainbow and thanks to its power to pump the necessary inflatable mattress. Non-traditionable application this devicecharacterized by a significant suction capacity, known for a long time.

It is worth remembering that even in Soviet times, when on domestic shelves it was possible to buy a local vacuum cleaner, the craftsmen used this equipment not only for direct intended purpose. But, for example, for whitewash, specialized nozzles were adjusted to the pump. Today, this mechanism can successfully perform the functions of the compressor.

If you use the Rainbow brand pump instead of the built-in device for inflatable furniture. And also attached to him nozzles, then problems with balls, balls, toys from rubber and, of course, the bedroom inflatable mattresses will not arise. All you need to do is choose a thin nozzle and strengthen it to the vacuum cleaner. Where there is a hole for air outlet. If everything is done correctly, then you will need a couple of minutes to pump up not only the ball or toy, but even the mattress on which it is supposed to have a comfortable sleep time.

The degree of elasticity of an inflatable mattress pumped by a third-party vacuum cleaner depends on several criteria. It is necessary to take into account not only the number of people who are going to rest comfortably on it, but also their total weight. In the event that the number of people is not great, and their weight is insignificant, then the degree of pumping of the mattress can be high.

If there are many people and, accordingly, the weight will be expressed in significant digital indicators. Then filling the air inflatable furniture is not 100%. Experts argue that rest on the inflatable mattress with significantly the number of people will be characterized by comfortable indicators when it will be inflated only percent for 80-85.

In order for the inflatable furniture to be comfortable, and not tough, the process of using the pumping vacuum cleaner into it should be under control. Relief level management must be started at the moment when the mattress area will acquire the first signs of elasticity. That is, when the "wrinkles" disappear from the surface of the furniture.

At this moment it is worth stopping the work of the vacuum cleaner. It must be remembered that the recommended degree of filling the mattress should not exceed ¾ of the volume of the cylinder. If this condition remains without attention, then the anticipation comfortable holiday So remain those. Because under the weight of the bodies of the suture of the mattress, most likely will be broken. Even if they appeared the most strong.

If the number of people measuring relaxing on inflatable furniture does not exceed two, then the filling indicators of the mattress in ¾ of its volume should be even reduced. The same principle of filling the mattress must comply with users if the balloon was directly sunny rays long period of time. This is necessary because inside the mattress in the sun, the air is not only strongly heated, but also expands. What creates additional pressure on the seams and its foundation.

A little about precautions

Inflatable furniture, including mattresses, requires a careful relationship. Protect similar products required from items with sharp edges. And also from animals that are not only sharp claws, but no less sharp teeth. It is not recommended to step on inflatable products with your feet. You can't get up on a mattress with one knee. The process of filling inflatable furniture by air and the reverse process should be carried out with a high degree of caution.

working from electricity,
manually,
with the help of the strength of the legs.

http://matrasec.ru.

Inflatable mattress is an indispensable thing on vacation (in a tent, at sea) or at home. Many use such mattresses as a full-fledged bedroom At the cottage or as an extra bed for guests. Among the advantages of inflatable mattresses are durability and ease of cleaning, storage compactness and lack of need for special care. You need to know how to inflate the mattress quickly and efficiently - after all, he may be needed in the most unexpected situation.

Pumps for mattresses

The mattress is a fairly overall and volumetric subject. In any case, the mouth does not inflate it. The best decision Question how to inflate an inflatable mattress is the use of the pump. Sometimes the pump can be included - from the same manufacturer. If not, then the low pressure pump will be required:

manual;
foot;
electric.

The electric pump is justified in case you have permanent access to energy - in the house or at least from the car battery. If not, choose a foot pump.

Inflation mattress according to the rules

How to inflate the Intex mattress? Electrical pumps cope with their task in as soon as possibleBut behind the pumping process should be closely monitored - excess air can easily damage the mattress. Okay inflated mattress - Elastic and without folds, it must be comfortable - so adjust the stiffness of the bedroom while pumping. Ideal if 3/4 mattresses are filled with air, but if you plan to use the product on an open sun or for several people, it is worth pumping even less. If you fill the mattress with air completely, you can provoke the breaks even the strongest seams.

Important! Want to check the reliability of the mattress? Imitate it and leave for 12 hours - during this time the loss of elasticity should not be more than 10%.

What if there is no pump?

There are such situations that the mattress is needed, but there is no pump. It is clear that the forces of their own lungs are not enough for such a volume, but how to inflate the mattress without pump?

You can use a vacuum cleaner as a compressor - for this you need special nozzle. It joins the outlet of the mattress and fills it with air literally in seconds. With this universal device, the question is solved, how to blow the mattress.

By the way! If you are in nature, you don't have a vacuum cleaner, you can apply original way - Collect air to a large package for garbage, then fix the edges of the airbag and "wear" it on the hole in the mattress. Press the bag with air - the air will switch to the mattress.

Finger the mattress

In order for the product to retain positive qualities as long as possible, you also need to know, and how to blow off the inflatable mattress correctly. IN modern models Mattresses This question is solved simply enough, because they are equipped with large special valves, through which air is very quickly. Press the surface slightly to speed up the air outlet, but not too much because it is possible to damage the seams. You can apply for these purposes and the pump - then the process of blowing the mattress will be very fast and safe.

If you go for a walk on fresh air, and someone forgot to pack air compressorMost likely you will not be able to find these comfortable tools for outdoor activities, how are you going to inflate the mattress through your air channel without using your mouth and shortness and dizziness from hard work of the lungs?
If you are a neat tourist and take with you garbage bags, so as not to pollute nature, then you are lucky. You will need a plastic bag and a little patience, but this method is simple and does not require too much effort on your part.
This video will show you an easy way to fill the mattress by air.
How to inflate the air duct without pump - from Davehax. Have you seen that someone inflates the air duct without any physical instruments? Most likely, you will most likely not be able to find these comfortable tools for outdoor activities, whereas will you inflate this air duct without blowing it with your mouth?

This awesome video will answer your question: how to inflate the air unit without pump. Thanks to the publisher YouTube "Davehax".
How to blow up a ball bed, if you do not have a pump. A simple solution that leaves you to dust. Ideal for camping.

fB.ru.
The first inflatable mattresses appeared in 1940. They were made of special fabrics impregnated with a vulcanized rubber. Currently, inflatable furniture is very popular. After all, it is convenient to use in country trains and tourist campaigns. Often it uses as a full-fledged sleeping place in the country. The inflatable mattress does not occupy a lot of space, it is easy to clean and does not require complex care.

Pumps

Dear models have a built-in electrical pump. But such a complete set is provided for all models. Therefore, the owners of the mattresses have to use a foot pressure or a manual low pressure pump. The car compressor is not suitable for this process. From high pressure mattress can burst. As soon as the product acquires the desired relief, the process can be stopped.

Security measures

The mattress needs to be entered into a heated room with a temperature above 15 degrees. It must be placed on a flat surface away from heat sources. There should be no sharp items on the floor. The bottom of the product is better to protect against possible damage to tarpaulo or foil. On an inflatable mattress should not fall straight sun rays. It is impossible to get up on the product. With increasing temperature, it is better to release some air. Inflatable mattress can not be miseled and exercised.

How to inflate an inflatable mattress without pump

A vacuum cleaner

Fen

Garbage bag

How to easily and quickly pump the boat or mattress, without having a pump using the exhaust pipe

https://zen.yandex.ru/media/master_fisher/

In this publication, share the next Lifehak - how to pump a boat or mattressif there is no pump. After all, anything can happen in life: a pump can be forgotten at home or it can break. Yes, you never know what can happen?
And on fishing already configured - not to cancel everything? Fortunately, there is one trick that will help pump a boat without pump.
So, if it turned out to be in a similar situation, when it is necessary to pump a boat, and the pump remains safely lying at home or garage, then you need to arm a couple of segments from the hose and one adapter.
For convenience, these things should always be in the trunk - the places do not occupy a lot, but it will be helped in a difficult situation.

One segment from the hose should fly to the exhaust pipe of your car, and the second segment - you can take from the boat pump itself. So now the first segment should be put on the exhaust pipe, by means of an adapter to connect with the second segment - and start the motor's motor.
And after a few minutes the boat will be pumped. Simple, quickly and easily. The method is suitable for an inflatable mattress when you drove on nature by car.

Along with traditional furniture options, the inflatable version is quite popular today, successfully used not only at home, but also in country trips, in tourist campaigns and in other circumstances. To fully enjoy the comfort of inflatable furniture, you need not only to purchase it. You also need to take care of the presence of a pump.

Some models of inflatable furniture have a built-in pump option, thanks to which the process of making the mattress of the necessary form will pass without any special difficulties. If the device is absent, then the question of how to inflate the mattress without a pump in conditions of home or apartment, you can find an alternative solution. But if the absence of the nanos is found on the lap of nature, then the inflatable furniture will remain in the initial state in the form of a pile of rubberized material.

What can be done?

For example, you can take a brand of household equipment for cleaning Rainbow and thanks to its power to pump the necessary inflatable mattress. Unconventional use of this device, characterized by a significant suction capacity, has long been known.

In order for the inflatable furniture to be comfortable, and not tough, the process of using the pumping vacuum cleaner into it should be under control. Relief level management must be started at the moment when the mattress area will acquire the first signs of elasticity. That is, when the "wrinkles" disappear from the surface of the furniture.

At this moment it is worth stopping the work of the vacuum cleaner. It must be remembered that the recommended degree of filling the mattress should not exceed ¾ of the volume of the cylinder. If this condition remains without attention, then the anticipation of a comfortable rest will remain as such. Because under the weight of the bodies of the suture of the mattress, most likely will be broken. Even if they appeared the most strong.

If the number of people measuring relaxing on inflatable furniture does not exceed two, then the filling indicators of the mattress in ¾ of its volume should be even reduced. The same principle of filling the mattress must comply with users if the cylinder was under direct sunshine long period of time. This is necessary because inside the mattress in the sun, the air is not only strongly heated, but also expands. What creates additional pressure on the seams and its foundation.

A little about precautions

Inflatable furniture, including mattresses, requires a careful relationship. Protect similar products required from items with sharp edges. And also from animals that are not only sharp claws, but no less sharp teeth. It is not recommended to step on inflatable products with your feet. You can't get up on a mattress with one knee. The process of filling inflatable furniture by air and the reverse process should be carried out with a high degree of caution.