How can an inflatable mattress be inflated? How to inflate a mattress without a pump. Advice

Finally, summer: the season of burnt backs, midday sleep on the beach and spending the night with friends in the country. All these different but equally summer activities have one common element - inflatable mattress... It is much more pleasant to do all of the above with him. But the mattress still needs to be inflated, for which many of us have neither the patience nor the volume of our lungs. Relax: that's to the point of disgrace an easy way to fill a mattress with air without any effort at all.

So, your beloved relatives suddenly came to you, your friends called you on a sortie, and the children want to go to the beach. The mattress has already been removed from the back drawer, but there is no pump in the house. What to do? Either blush and test the vessels on the cheeks, or go for garbage bag... After all, it is he who will save the situation from failure, and the guests from the prospect of sleeping on the floor.

Take the bag, unfold it and draw in more air. For the easiest way to do this, look in the video below.

Squeeze the "throat" of the bag more tightly so that the air does not come out.

Bring the bag of air directly to the valve so that the latter is inside.

Press down hard on the bag to release all the air, filling the mattress. Repeat the entire procedure several times until you have completely inflated the mattress with the "pump" package. Just remember to close the valve between sets.

The whole process of inflating a mattress with air from a bag is captured on video. It looks funny, so it will definitely amuse your friends. But it works!

Well, if all the preparation of the mattress takes place at home, then you can do without dancing with a tambourine or a garbage bag. Just inflate this thing hairdryer with cold air function and sleep well.

And with this summer life hack, another one goes perfectly:

Do you often host, plan renovations, like to go hiking or spend a lot of time at the dacha? can become a reliable helper and provide a temporary comfortable place to sleep. It is a mobile, compact and very easy-to-use product.

Where can inflatable beds be used?

Homes for yourself and for guests

It is not uncommon for the owners to find themselves in new apartment and haven't chosen furniture yet. In this case, the inflatable bed will provide you with a good night's sleep, but in the meantime you can start looking for suitable furniture.

If the apartment does not have a guest bedroom, this sleeping place They will like a lot more than a folding bed or an uncomfortable sofa to sleep, not to mention making a bed on the floor.

In the country

If you do not have sleeping places in your country house, you will appreciate the convenience that an inflatable bed will provide both indoors and outdoors, on fresh air... It is so nice to arrange for yourself a cozy place to relax in the shade of trees or by the pool. To do this, you just need to throw a light bundle into the trunk of a car and inflate it on the spot in a few minutes.

Varieties of inflatable beds Intex

Among the wide variety of beds of this brand, you can choose the best option for any room. For one person and small room a single bed with a width of more than 70 cm is ideal. Double (140-170 cm) and one-and-a-half (over 100 cm) options are also good for a small room, they have enough space for two.

A double bed with a width of 150-157 cm for a while can easily replace a regular bed, and a King Size bed with a width of more than 180 cm is an excellent choice for a large bedroom.

Height inflatable beds Intex comes in three varieties:

More than 56 cm - products superior comfort can replace a stationary bed;

From 22 cm - the most common option;

From 13 cm - an economical option.

How to properly inflate the bed

In order for the bed to serve for a long time, you need to know some of the features of its operation. After inflating, the product should remain slightly soft, be slightly puckered. The load on the mattress must be evenly distributed. To do this, you can lay a thick blanket on top of the mattress. Constant uniform load distribution will extend the life of the product.

It is also necessary to consider the weight of sleeping people. If people weighing up to 70 kg sleep on the bed, when using an electric pump, you need to wait until it starts to idle, and then turn it off. If the weight of the sleeping people is more than 70 kg, after inflation, you can deflate a little, making the bed softer. The body puts pressure on the air inside the product, so the bed will become stiffer and people will feel comfortable.

Types of pumps for inflatable beds

A built-in and external pump is used to inflate the beds. Which variety to choose depends on where you plan to use the bed.

For outdoor operation - in the country, on hikes, on the beach, it is better to choose the option with an external pump. Such a bed weighs less, more mobile. The pump can be purchased separately. A foot pump or a mechanical hand pump will work in any conditions, the battery pump can be charged from the mains at home. A model with a built-in pump, which operates from the on-board network of a car, is also convenient. The cord is inserted into the cigarette lighter socket.

For home use, a model with a built-in electric pump- access to the power grid is everywhere. A bed with an electric pump inflates in a few minutes, it also deflates very quickly.

The easiest way to pump up the beds is with an electric pump. They have limited capacity, which prevents pumping of the mattress. Using a mechanical pump, the product can be inflated to the point of rupture. When using this type of pump, you need to be careful - do not pump the bed, leave the mattress slightly soft, slightly crumpled.

How to lay a sheet

It is most convenient to make a bed with a two-chamber structure - the sheet is simply fixed between the two chambers on all sides. For other beds, you can use a cover sheet with elastic bands around the edges, pulling it in all directions and gently straightening it. The velvety cover of the beds resists slipping and helps to keep the sheet on the surface of the mattress.

Intex inflatable beds are extremely comfortable, sleeping on them is just as comfortable as on a regular bed. Designed to resemble an ordinary bed, the models have a mesh of air cells connected to each other, which contributes to an even distribution of air inside. The bed with air cells is particularly rigid and stable.

In order to provide the body maximum convenience during sleep, you can choose a bed with orthopedic mattress... Cross braces at the top and longitudinal at the bottom orthopedic bed provide support for the spine. On a high-quality Intex bed with a support system in the form of cylindrical or longitudinal inserts, you can sleep for people who have problems with the spine. The more inserts by the bed, the more pronounced it is. orthopedic effect... Most high beds have the most a large number of cameras.

Inflatable bed care

In order for inflatable beds to serve for a long time, you need not pump the products, dry them before packing when used in nature, and do not leave them for a long time under the influence of direct sunlight.

To remove dirt, it is enough to wash the surface of the bed with soapy water.

Intex inflatable mattresses are very popular among customers. They are compact, easy to use and reliable. Such a mattress can be taken with you to the sea during a summer vacation or used in the country for rest and sleep. They do not require any special maintenance during operation and storage, and are also easy to clean thanks to the high-quality coating.

Having made a good purchase, you need to think about how to inflate an Intex mattress. The easiest way to do this is to use a pump. If during operation there is constant access to the power supply or the car - an electric pump the best solution otherwise you will need a foot model. Inflate the mattress with smooth movements by attaching the pump tube to the valve, constantly monitoring its elasticity in order to prevent excessive inflation.

To avoid unpleasant moments, you need to know how to check the mattress. Check the air valve first. The easiest way is to apply soapy water to the closed valve using a washcloth. inflated mattress... If it does not fit tightly, after a few minutes, in places where air passes through, bubble... To be fully confident in the reliability of the mattress, it is recommended to leave it inflated for 10 - 12 hours, the loss of air during this time should not exceed 10%.

How to inflate a mattress without a pump? While at home, this problem can be solved with a vacuum cleaner, using it as a compressor. Attaching the mattress with special attachment to the outlet of the vacuum cleaner, you can fill it with air in a matter of minutes. Unfortunately, being in nature, you will not be able to use the mentioned method, and yet you should not try to inflate the Intex mattress with your mouth, because this is not a ball or a balloon.

Since it is better to clean the mattress when it is inflated, it should be washed with soapy water, dried and only then let the air out. Where the mattress long time stays in the open sun, the manufacturer recommends pumping it a little less. As the air heats up, it increases in volume, which can lead to the creation of too much internal pressure and, as a result, damage to the mattress.

Even if it happens to harm durable matter, there is no need to rush to throw it away. Knowing how to seal the seam of an air mattress is very easy to repair. For repairs, use a special polyurethane glue for rubber. The place around the cut is degreased with gasoline, alcohol or acetone, then glue is applied with a thin layer and the rubberized patch is pressed. In case of damage on the velor side, the pile is first cleaned sandpaper... The sealed mattress is best placed under a press for 24 hours for reliability and be sure to check before use. During operation, the Intex mattress must be periodically pumped up to the optimal volume, and in order to extend its service lines, follow the instructions and not allow too much inflation.

The first air mattresses appeared in 1940. They were made from a special fabric impregnated with vulcanized rubber. Nowadays, inflatable furniture is very popular. After all, it is convenient to use it in suburban trains and tourist trips. It is often used as a full-fledged sleeping place in the country. The inflatable mattress does not take up much space, is easy to clean and does not require complex maintenance.

Pumps

Expensive models have a built-in electric pump. But this equipment is not available for all models. Therefore, mattress owners have to use a foot or hand pump. low pressure. Automobile compressor will not work for this process. High pressure can cause the mattress to burst. As soon as the product acquires the desired relief, the process can be stopped.

Security measures

The mattress must be brought into a heated room with a temperature above 15 degrees. It must be placed on a flat surface away from heat sources. There should be no sharp objects on the floor. It is better to protect the bottom of the product from possible damage with tarpaulin or foil. Straight lines must not fall on the air mattress. Sun rays... Do not stand on the product with your feet. If the temperature rises, it is better to let out some air. The inflatable mattress must not be wrinkled or bent.

How to inflate an inflatable mattress without a pump

If the pump is not at hand, you can use other methods to inflate the mattress. How to inflate a mattress without a pump? The most obvious way is to use your lungs. But it will take a lot of time and a few tough guys. You can use the exhaust pipe of your car. But exhaust fumes are not very useful and can damage the surface of the mattress.

Vacuum cleaner

How to inflate a mattress without a pump? Use a vacuum cleaner to inflate and deflate the mattress. Everything is simple here. A thin nozzle from the device is attached to the opening of the mattress, the vacuum cleaner turns on and inflates the mattress. Do not inflate the product by more than 85 percent of its volume.

Hair dryer

The main thing is that the hair dryer fits the valve of the air mattress. It is necessary to turn on the "cold air" mode and pump up the product. Hot air can damage the inflatable mattress. This method is effective, but it takes some time.

Garbage bag

This method is convenient to use outdoors or in the country. It needs a tight, high-volume bag. It is filled with air and connected to the mattress inlet valve. Next, you need to lie on the bag, distilling air from it into an inflatable product. The procedure will have to be repeated several times.

Inflatable mattress inflating with built-in pump. We need the mattress itself, an electric pump and the nearest outlet.

We bring the product into a heated room with an air temperature of at least 15 degrees. The mattress does not tolerate cold and close proximity to heat sources.

We put the mattress on flat surface, there should be no sharp objects on it so as not to pierce the product. Protect the bottom of the mattress strong foil or tarpaulin.

The product should not be exposed to direct sunlight. If the ambient temperature is expected to rise, the air should be slightly vented. Do not pump the product to avoid damage. We make sure that the mattress does not wrinkle or bend.

Inflation is carried out until the mattress becomes embossed. So its seams will not be damaged, and when falling asleep and lying on it, the owner of the mattress will experience maximum comfort.

From time to time, the air pressure is checked, if several people are sleeping or lying on it, then perhaps the mattress should be "lowered" a little. To deflate it, simply open the valve.

How to inflate an inflatable mattress without using a pump

The mattress does not always include a built-in pump. Can be used alternative ways inflating, for example, foot or hand pump... Do not pump the mattress with a compressor from a car or other devices with high pressure... Do not inflate the product by more than 85% by volume.

If there is no pump, then you can inflate the mattress with a hairdryer, vacuum cleaner and even a bag

Ways and tools at hand

We use a vacuum cleaner

We take a vacuum cleaner, connect the thin attachment of the device to the outlet and connect it to the opening of the mattress. We turn on the device and wait until the mattress is inflated to the required rigidity.

Inflating the mattress with a hairdryer

This is done quite simply. We plug the hair dryer into an outlet, turn on the "cold air" mode and start pumping. This method is longer than inflating with a built-in or conventional pump, but it is also effective. The main thing is not to inflate the product with hot air, which can damage the product.

Inflating the mattress with a large garbage bag

This method of inflation is very convenient in nature, in the country, or in cases when you accidentally forgot the usual sediment at home.

We take a dense garbage bag with a large volume. It must not be damaged. We open the inlet valve on our mattress, fill the bag with air, adjust both necks in diameter. We lay down with our body on the bag, distilling air from the bag into the mattress. We continue such manipulations until the mattress is completely inflated.

How not to do it?

If nothing was at hand? You could use the power of your lungs by inflating the mattress with your mouth. Such manipulations are easier for a man to perform, but if there are a couple of strong guys nearby, then the two of them will go to inflate the mattress 15-20 minutes... Better to give up this method and save your lungs.

If there is a car nearby, you can use the exhaust pipe to inflate the product. With this method, it is easy to inflate not only the mattress, but also the children's pool and inflatable boat for fishing. It is enough to build an adapter and start inflating. Minuses this method the fact that exhaust gases and carcinogens destroy the product from the inside and seep to the surface, causing harm to health.