Store for storing drills. Stands and organizers for drills: do it yourself and store drills correctly. Methods for proper storage of metal drills

Drills are used as a two-dimensional cutting tool for the formation of holes in various solid materials, including in the metal. Previously drilled surfaces are also drilled. Increased from high-speed steel and solid alloy, have different stiffness parameters, sizes and durability. The most popular are spiral devices. There is also pen, with straight grooves, centering and speed (combined). Operational parameters Drills depend on the material from which it is manufactured, as well as on the characteristics of heat treatment. Like others cutting toolsThe drills have a property to wear out due to a long operational period, as well as due to incorrect cutting modes. The rear surface, ribbons and corners are most often wearing, rarely the front surface. The speed of wear is directly influenced by the drill resistance, so it is very important to know how to store drills.

The resistance of the device, as well as on the drill service life affects the operation time of the device in minutes before blunting. The most subjected to the wear point of the transition of the main cutting edges into auxiliary, which are also called ribbons.

For service life also affect such performance features, as:

Roughness surface cutting part of the tool;
Thermal processing quality;
Cutting speed;
Innings;
Using coolant.

If these parameters are not withstanding, you will have to deal with the effects of improper operation, as well as improper storage of the tool. Improper storage facilitates a sticking of garbage particles to a tool, wear its elements, as well as blades.

Methods for proper storage of metal drills

How to store drills? Storage drills involves using:

penalties;
wood supports;
plexigla.

photo: Storage Metal Drills in Penal

These are all special convenient storage stands that perform device protection feature. Wooden stands with impregnation from http://permachink.by/propitki-dlya-dereva are structures that combine several plywood sheets, two of which perform the positioning function, and the third one. Without removing the drill with this stand, it can be wiped from dust and garbage. Stands are a wooden bar in which special holes are drilled under the device elements. Holes have an appropriate diameter. Used in order to avoid the loss of the structure.

photo: Wooden stand for storage drills

Special plywood cases and wooden stands Prevent possible napillary of the particles of the metal, garbage and dust particles to the tool. They also protect against elevated drill blades, excessive wear in corners and ribbons and possible damage, blunt.

photo: Support from the drive for storing drills

The backups can also be manufactured from a transparent plexiglass, which is attached to the device in order to work on the underside drilled hole chips did not appear.

Wooden Stand Production Technology

In order for the tool always in place and at hand, you can independently make a wooden suborae. To do this, you will need:

Pick up the size of suitable plywood sheet under the device. Optimal size Wooden plate - 2.5 cm thickness, 6 cm width, length 20-30 cm.
Drill several holes for fastening in the corners of the sheet.
Cut wooden bars stripes, they must have the necessary length.
Drill holes that will correspond to your diameter with drill diameter - From small to the largest. The drill is to have a few rows, each row is a certain diameter. Drilling holes for a tool with a specific diameter, use a bull, which will have a slightly larger diameter by 1.5 mm in order to ensure the ease of insertion and delivering the device.
Treat the subeau for emery paper.

The device can be suspended on the wall in the workshop, having nails.

With proper storage of cutting devices, you will not need to carry out a regular sharpening.

How to store drill-storage drills on a wooden stand: video

Good day, brainchina! The workshop when the mess reigns in it, this is not a workshop at all. And the topic of "ordering" tool is devoted to this article in which I collected 9 not quite ordinary ways to store a healthy tool for your mozgosaster. We guarantee that they are suitable for any tool ever existing on the planet Earth!

In the fall of 2015, I created a storage board The Ultimate Magnetic Pegboard, but time passed and I had even more tools, and meant it that I needed another self-timer For ordered storage of this tool itself. In this mozgorovodiculture I will tell you about some devices that I equipped a new board with a tool.

So let's go!

Step 1: Kitchen dispenser Towels than not holder of clamps?

My granny gave me a dispenser for paper towels, and I decided to put it in business. The rod of this dispenser was plastic and did not hold the weight of the clamps, so I replaced it with a metal guide from the old mozgoprinerwhich cut to the length of the length * and with the help of epoxy resin Printed to her fastening sides.

When installing this obtained crossbar for the clips on the board, I used small wooden padsTo get more space and simplify the removal / engagement of these clamps. It should be noted that the clamps are quite heavy, so the more screws when attaching the crossbar you use, it will be more reliable.

Honestly, I will say that this method of storing the clamps is much easier than all other options for clamping crossbars.

* Guide I cut almost half lonoving than I needed that there was the place for others MoskjectsI plan to acquire in the near future.

At my crossbar of the kitchen dispenser, towels fit:

3 15 cm-climb clamps
10 cm-i clamp
5cm-I clamp.

And there is a place for many others that should appear soon!

Step 2: And the screed clamps than not holders?

Clamps have a wide range of applications, so why not use them as holders? In the storage board, I drilled a pair of holes, made a clamp through them (the size of which depends on the value of the instrument, which is planned to be placed in it) .The back side Boards and inserted the tool. All simple!

Thus mortgage You can store a soldering iron, borders and a lot more! In case you are planning to place a heavier tool (for example, drill), it will be more expedient to use a metal clamp.

With the help of "Homuts", I have:

large metal tweezers (because not "lipnet" to magnet)
little plastic tweezers.

Step 3: What about the radiator?

This idea visited me in November 2015, and I implemented it to accommodate my plastic tweezers, securing this holder directly on the wall above the magnetic board. I attached a radiator with a bilateral tape so that his ribs are vertically, and hanging tweezers on them, and some ribs performed as delimiters!

I got this radiator from my game console, which even has a whole mozgorovodiculture.
On my "radiator" holder are placed:

5 different plastic ESD-tweezers.

Step 4: Magnets in the case!

I guess you have already seen my board Ultimate Magnetic Pegboard, if not, I advise you to familiarize yourself!

And in in my new board For storing the tool, I also used magnets, "mined" of their speakers, which glued with hot glue to it. This kind of holders make it quite easy, you just need to understand in what place Mozmanki. Each tool will be placed.

With my "magnetic" holders are stored:

large sprinkling planer
small sprinkling planer
big iggogubsy
kusachachi
flat iggogubsy
curved iggogubsy
ordinary iggogubsy
joiner's displacement.

Step 5: Do not forget about screwing straight hooks

From the screwing hooks, it is preferable to rendered at right angles, they better hold a massive tool, for example, presented in the photo, a large rasp with a massive handle, but even its dimensions do not help with round hooks to hold the rasp.

But with the help of straight hooks your tool to store is very simple, try this braid And find out what is the speech!

This is not visible in the photo, but I screwed the hooks also from below, as "locks", preventing the falling out of the saw, it does not matter from what.

On my "hook" holders are stored:

brushes (no, I do not draw, they serve me for another)
big Raspil
large file.
hacksaw
and my microscope self-timer .

Step 6: And the foam is useful

You can not believe, but for storage drills I used foam. It is very soft, it weighs little and easily cuts, as a result, it is great for storing small tools, for example: drills, leggings, small screwdrivers, pencils, etc.!

About how I built a foam holder drills I created a separate Mozgorovodiculture.

Such a storage device can be made of wood, while the foam will serve good material For the prototype of such crafts.

Step 7: And of course small shelves!

The device called the "French Planck" of course "cool", but to my regret, I do not have the opportunity to make a similar one.

Therefore, I decided to attach a bunch of 90 degrees to the storage board by means of small corners.

On my "mini-shelf" posted:

my homemade magnetic silicone lining on the hoody sponges (because they decided to use them anymore anymore)
two different grinding bars
lamps for nails (although for these purposes it is possible to better use scissors for metal)
multitole size with a credit card
flashlight in the form of a phone.

Step 8: And even the bushing from the toilet paper there is an application!

Must admit, the idea is really strange ...

In the sleeve from the roll of paper, I cut the hole, then cut it in half and attached to the board.
I use this fixture now only for storing my xy selfieckers , it weighs little and "paper" holder is only slightly bent. Obviously, for a heavier tool, this method will not fit ...

Step 9: Another "mini-shelf", but with holes

To create it motor holder I was inspired by one recently.

The order during storage of drills allows not only to always maintain them in working condition and clean, but at any time find the tool for the required diameter. To do this, you can independently make an organizer for drills using the simplest materials that are always available in any domestic workshop.

How to organize storage drills

For storage drills you can come up with an organizer own design Or use options that have already been tested by other domestic masters. The main thing is that such a device ensures convenient storage Drills and allowed to quickly find the desired tool at any time.

Organizers for storing drills can be made from any submitted materials. It can be trimmed wooden bars, details from old furniture and much more.

The drill stand is necessarily done with the holes. The distance between the holes, like their diameter, is selected depending on cross section tool. The depth of the holes is usually performed within 25 mm. For drills in a homemade organizer, it is convenient to find, below each storage hole you can make a sticker on which the tool diameter will be written.

The shape and dimensions of the self-made organizer for storing drills can be any - it all depends on the preferences of a particular wizard.

Manufacturing an organiser for drills

You can make an organizer for drills with your own hands from the case in which the video cassette was previously stored. These cases that differ in compact dimensions allow you to nevertheless it is convenient to store quite a lot of tools in them. In addition, such a plastic case closes, protecting the contents of moisture and dust.

First of all, it is necessary to make two stands that will allow not only to compactly place the tool in the storage box, but also will not allow the drills to rub each other and blurt out. Each drill stand is manufactured from wooden barin which holes are drilled.

The surface of the bars on which the holes will be pulled under the tilt. Thus, the tools in the organizer will be located on a cascading principle, which is very convenient.

The box itself is a drill, which, as mentioned above, will be made of a plastic case for a video tape, it does not need a large alteration. In the future, the organizer is only necessary to post special holderswhere every stand under the drill will be recorded. You can make these holders from a small diameter bolts that will be inserted into the holes drilled in the side of the plastic case. Stands, suitable on holders, can freely rotate, which allows you to change their position when closing and opening the box.

For drills more reliably held in the organizer, the magnetic strips can be glued to the bottom of each bar or use the magnetic holder for the knives for these purposes. Under the film that is on the top of the cases from the video cassette, you can place a sheet with a list of tools that are stored in such a case.

Thus, make your own organizer, providing accurate storage of the tool, is completely simple. Such compact plastic cases are placed without problems in the desktop boxes or fit on the shelves, where they also do not take a lot of space. A home-made organizer once and will ever decide how to store drills in order and in good condition.