How to make a jump at home. How to make a rubber egg from the chicken shell is not and you can play the egg as a ball. The film is very thin, therefore, can break with inaccurate circulation

There are many interesting and safe experiments that can be held at home. To do this, you can use what is in the house. Such experiments do not require a special place and special knowledge.

The essence of the experiment

Funny experiment can be carried out with a conventional chicken egg, you can use quail egg, with him the process will go a little faster. The entire focus of the experiment is how to make a rubber egg from the most ordinary egg.

For this, the egg is placed in vinegar and leave for a certain time. Vinegar reacts with calcium, completely dissolves it. The shell comes off the protein in the form of gas bubbles. What remains at the end looks like a jelly elastic ball, in appearance and to the touch it seems that it is rubber. For those who reflect on the option, how to make a rubber egg without vinegar, the answer is simple - no way! Without vinegar, the necessary reaction will not happen, and the experiment will not be able or the result will not be one.

First stage of experiment

Now you will learn how to make a rubber egg at home. To do this, prepare vinegar 9%, one egg and glass dishes.

An egg is put on the transparent sudine and poured with a vinegar so that it completely disappeared. The reaction begins instantly, the carbon dioxide bubbles appear immediately on the shell. In the bird eggs in the composition of the shell of 90% calcium carbonate.

When an acid exposure occurs, the shell starts soften and decay into small elements. When decaying, a chemical product is distinguished - carbon dioxide. To figure out how to make a rubber egg, you do not need to have special knowledge in chemistry. The only thing you need to know in this case is that it is impossible to use such an egg in food. Now everything needs to be left for 15-24 hours.

Continued experiment in a day

After the specified time, the egg must be removed from vinegar. You can do it without gloves, with a short-term contact with the skin, nothing bad will happen. It will be noticeable to the unarmed look that the egg increased in the amount, the remains of the shell remained, but now they are more like a white powder. These residues need to be washed in water. That's how to make a rubber egg with your own hands. It has been powered by vinegar and has become a touch as a dense jelly or rubber. The color of the protein became darker, and the yolk remained in the same condition as before.

The egg can be slightly compressed, it fumbles well from a solid surface like a jump. But throwing it from a high height or apply the power when the power does not stand. Only the upper shell becomes dense, and part of the protein and yolk remain in the liquid state. When you try to cut this "abnormal" content flows outward. If you enlighten it, you can see where the yolk is.

White egg

In addition to this method, there are other options how to make a rubber egg. In this case, it will not be transparent, but white. The entire experiment is carried out in the same way, acetic acid is used instead of vinegar. Withstand the egg in the chemical of the laid time, it also needs to be washed under running water, in this case the hands are better protected from the effects of acid and use gloves.

The outer shell is also completely dissolved, but the egg itself has white color, like boiled egg, and to the touch it is not so elastic, it does not spring if it is thrown onto a solid surface, but as an experiment is also interesting.

Colored eggs

Such experiments are very fun, it is also interesting to rummage with the resulting jokes, they perform a peculiar role of anti-Stresses. That is why you can make such "abnormal" multi-colored.

How to make a rubber egg color? Very simple - add a dye to the eagle to vinegar. Such dyes have a resistant and rich color, they dissolve well in vinegar. In packing with dyes there are different colors. For such an experiment, it is necessary to prepare as much written as colors will be used in the experiment. How many colors, so many eggs. In each dish, there is one egg and the powder of the desired color is added. It is all pouring vinegar and wait for the laid time. When removing the residual raid from the shell, only the color "thrumper" will remain.

Of course, you should not forget that the egg did not actually turn into a rubber ball, and you do not need to put it in toys. Over time, it will still deteriorate, or from mechanical damage will begin to get stuff. There is little pleasant in that and to fall apart by a spoiled egg, the smell of his terrible and washed off gradually. If in the first couple of days it does not break, then it is better to throw it. If you wish, you can always make a new "rubber ball".

Elastic rubber ball is a wonderful toy for children. Optional to buy a jump in the store. Not everyone knows, but it can be made at home. There are several options for making a ball from different materials, Learn the material and choose the option optimal.

How to make an egg jump

To create an abrupt chicken egg, you will be needed:

• table vinegar - 2/3 cups;
• egg chicken - 1 piece.

Preparation method:

• Weld up screwed egg.
• Lower the egg into a glass with vinegar.
• Leave it there for two days.
• Get the egg and rinse under water.

Under the influence of calcium vinegar is dissolved, and the yolk will resemble jelly. Jump such a ball will not be because when this method manufacturer it will remain fragile.

How to make an adhesive jump

For the manufacture of the ball from the glue, you can use PVA (then the ball will be white matte) or silicate glue (it turns out a transparent ball). Necessary materials:

• silicate or PVA glue;
• ethanol;
• bowl;
• latex gloves;
• long wand.

Manufacturing instructions:

• Pour alcohol and glue in a bowl. If you use PVA - knead in equal proportions for forty millilitters, if silicate - take glue four times more than alcohol.
• Press the mass form.
• Put the ball on the table, let it thicken for twenty minutes.

If you want to make piping color - add a few food dye into the ground.

How to make a porch of rubber

Of the bright stationery, a completely decent joy. Necessary materials:

• foil;
• paper;
• stationery gum.

Instruction:

• Roll the bulb from the paper. The newspaper is quite suitable.
• Wrap the resulting foil ball.
• Get on the resulting ball of gum in several layers.

How to make a padline pitch

For a pile of plasticine, such materials are needed:

• foil;
• stationery gum;
• plasticine.

How to do:

• Skate from plasticine ball.
• Wrap it with a foil layer.
• Strengthen rubber bands.

The method of manufacture is similar to the previous one. But the ball of plasticine should turn out to be more spring.

How to make a glowing jump

Such a jump will glow in the dark. For the manufacture you will need:

• bura - 5 g;
• dye - 10 g;
• pVA glue - 10 ml;
• starch - 1 tbsp.;
• warm boiled water - 0.5 tbsp.

Manufacturing instructions:

• Pour water in a bowl, mix the boor.
• Add a dye to the mixture.
• Pour glue into another bowl, 5 ml of borants and add starch.
• Wait twenty minutes until the reaction occurs.

Faster and more practical will buy a jump in the store. But, made with your own hands, it will become a valuable toy. You can bring your feature with the help of dyes, combinations of colors of stationery rubber bands. And if the thrumper will glow in the dark - this is not every purchase of the ball knows how! Connect the fantasy and wake up a jumping ball with your own hands.

Pumpchant - Favorite toy, familiar with many kids, familiar to several generations of people. Almost all children dream of the presence of a simple ball, which from a small blow of the floor jumps on a large height. Make a porch with your own hands is easy, enough to stick useful recommendationsdescribed in our article.

What throws do

BEFORE, wondering how to make a joy of home should be studied from which materials this miracle ball can be made.

Tip! For independent manufacture Pumps do not let any of the stages of the work of children. Often the base of the jump is components that, with improper use, there may be significant harm to the baby's health.

So, what are the abdrons do now? There are several methods to help get a rounded or oval bouncing ball:

How to make an adhesive jump

But back to the topic of our article, which implies a story about how to make an abrupt pulley of silicate or pva. To make such a ball at home, it is necessary to have the next set of auxiliary materials at hand:

• Ethanol;
• Silicate or PVA glue;
• Wand-stirrer and dishes for glue stirring;
• Latex gloves.

The procedure for creating an adhesion from glue does not differ in difficulty, but it is accuracy to comply with production technology and be extremely neat, since the materials used are distinguished by toxicity.

From silicate glue

Universal technology for creating an adhesive across glue is represented by the following stages:

1. Silicate glue is poured into the prepared container, and then ethyl alcohol is added there. When performing mixing it is necessary to remember the need to comply with the proportions. So, the silicate adhesive needs to take 4 parts (a tablespoon is often the measuring element in this case), and ethyl alcohol - 1 part.
2. Components should be thoroughly mixed up to the formation of thick homogeneous mass.
3. Next, rubber gloves are worn on the hands, and then the ready mass is taken in hand, and a small ball is rolled out of it - the future abridgement. Note that this stage in its duration takes a lot of time, since it is necessary that the mass is completely dry and hardened. When this happens, your jog for a child can be finished!

Knowledge of information on how to make a ball jump at home, will help you understand how the chemical components of the homemade toy affect the degree of its jumper, the shade of the ball, its texture and others specifications. You can independently change on your own discretion chemical composition Adhesive masses, creating a masterpiece toy for his child.

From glue PVA

It often happens that there is no silicate adhesive at hand, but the usual PVA glue can always be found in any stationery store. And so we offer our readers to get acquainted with the recipe for creating the most ordinary jumper ball. After reading him, readers will be able to learn how to make a plow jungle of PVA.

For a conventional adhesive jump, you will need such materials:

• PVA stationery glue, which can be purchased at any store offering its purchases for office and school.
• Liquid dye of a certain color (select such a shade, which would like to paint independently made by the porcong). You can always buy a dye in the shop of industrial goods.
• In the pharmacy buy alcohol ethyl 90-95%.
• Also for the manufacture of the junction with your own hands you will need a container for mixing glue, alcohol and dye. In addition, a long wand should be prepared for uniform stirring and obtaining homogeneous consistency. It may be a stick from ice cream, old handle or broken pencil.

The procedure for the manufacture of the junction of PVA glue with their own hands is carried out almost the same as from silicate adhesive composition. Proper execution The work implies the following steps:

1. In the prepared deep container, glue the stationery, adding a dye into it in the same proportions as himself glue composition.
2. At the next stage, alcohol is mixed up to these two components, and it is taken in the same quantity as the dye with glue. Uniform stirring is carried out by means of smooth wand.
3. It should be understood that the solidification of the prepared mixture occurs very quickly, so it is necessary immediately after stirring to take a mass in the hands, having formed a ball from it of the desired size. When performing such a job, accuracy and safety is important. It is advisable to protect the hands with rubber gloves before taking a mass of glue and alcohol in them.
4. The finished ball must be given a little time (10-20 minutes) for drying, and then they can already play. The ball will rip out of the floor, and not worse than the thrush acquired in the store.

Luminous

Creating a bouncing ball with your own hands for his child, you can think about it design design. For many parents there will be no secret to the fact that the children pay their attention, above all, on bright and unusual things. About how to make a jump from the rubber band is written above, but there is more interesting technology Making a jumper ball.

As a raw material, the adhesive mixture painted in different shades is used for this toy. It is prepared by the above-described technology, but it is separated into several parts, in each of which add their shade of the dye. Then these parts are combined into one, and as a result, an original multicolored ball-joy is obtained.

If a toy is made for a girl, then simultaneously with the dye can be added to the glitter glue composition. The product will turn out not only to color, but also brilliant, it will be beautifully overflowing into the light.

Perhaps most original option The decoration of the pug is a luminescent dye added to the adhesive mixture at the stage of manufacturing a toy jumping ball. The procedure for the production of such a type of jumper is carried out according to a scheme similar to the one that is presented above. The only difference lies in the fact that at the stage of mixing of silicate glue with the dye instead of ordinary bulk dry paint, the coloring agent with a luminescent effect is used.

Taken S.

With any child, without exception, enjoy playing with a jump. This is such a funny ball, which when hitting the floor, fun bounces on a fairly large height. The defer really likes. This fun toy is familiar to several generations. Yes, our moms and dads, grandparents did not know the jumps, which are made of rubber or rubber, they did not bought them in special slot machines. The older generation made them with their own hands. I wonder, and they know how to make a jump from the egg? Or did they make this toy from another material?

It is necessary to consider the basics of manufacturing techniques. Make the jump is not at all difficult. Should be stocking only some consumables (It depends on what an abnormal will be made), unprecedented patience and diligence, as well as great accuracy.

The value of work "do it yourself"

Creation with your own hands is always Mile and closer to the heart. In his own hand, a person puts not only labor, but also an emotional message with a particle of the soul. The process of creativity and work with small details, allow you to relax, distract from daily concerns and problems, restore emotional equilibrium. After all, the benefits of creativity have been proven for a long time.

Every person has a creative start, it should only be developed. Reveal and liberate a person is easier, of course, in childhood.

Have you ever been interested in how to make an egg jump? Show the smelting and think a little.

What material can you make a pug?

The material is usually the easiest, what is usually located, as they say, "at hand":

• stationery glue;
• egg;
• stationery and paper.

Of course, the main materials are listed here. The calculation does not take, for example, a stick for glue stirring, brush, etc.

How to make an egg jump

The easiest way is to use a chicken egg.

It will take:

• 1 chicken egg;
• 1 bottle table vinegar (1 liter volume).

The jumper can be made on the basis of a raw or boiled egg. However, the jar of boiled egg is more resistant to shocks, so it is recommended to use it.

Method of manufacture:

1. Need to boil the egg and put it in glass jar, Capacity one liter.
2. Fill the bank with vinegar (right up to the neck), close the lid and put in a dark cool place for three days.
3. SOLVE Egg in cool water. The shell on the egg is completely dissolved (vinegar is actively engaging). The egg visually should be a bit transparent and very elastic, tight (remind a rubber ball). In addition, it will increase significantly in the amount (compared with raw).

That's all. It turns out that the answer to the question is: "How to make a jumper from egg and vinegar?" quite simple.

Attention! The jump from the egg (even from boiled) is quite brittle, so it should not beat him too much about the floor.

Interestingly, and with what other ingredients can you connect an egg in order to get piping? On the Internet there are a lot of recipes for making jumps. The main, of course, is vinegar. I wonder how to make a jump from eggs and oil? Unfortunately, there is no such recipe. Oil does not have the property of the seal of the protein and can not serve the shell.

Do not be afraid of experiments, create and be happy from your activities! And remember that on how to make a jump out of the egg, now you can not only tell a lot in the company, but also to show on the example.

Remember!

For the manufacture of the jumps, such ingredients are required, which are able to harm the child with careless use! In this regard, do not let the children in the process of manufacturing a jumper. You need to create yourself, or agree that the child will only observe the process of making toys. If you trust your child and consider it enough adults, then once again warn it about the danger of some components.

It's not at all difficult and required ingredients Load in any house. You can embody your expert desires and feel yourself by a chemical scientist! And just interesting in the end! \u003d)

Do you know that if you put an egg in vinegar for two days, the shell dissolves, and the egg will become elastic. Under the influence of calcium vinegar, which consists of a shell, dissolves and disappears in the form of gas bubbles. It turns out a funny egg that looks like jelly. If you put an experiment over the boiled egg, it will be done elastic like a rubber ball

Nallem table vinegar (9%) in a transparent glass and lower a chicken egg in it. From the surface of the egg, carbon dioxide is instantly started. The shell of bird eggs consists of 90 percent of calcium carbonate. Therefore, when interacting with acid, it begins to decay, highlighting CO2

After 12-15 hours, we look at what happened. Calcium from the surface of the egg was dissolved. Only the film between the shell and the egg remain uncaded. Pull out the egg from vinegar and rinse with running water. The egg increased a bit in the amount, because it was poisoned by vinegar

Shells are not and you can play the egg as a ball. The film is very thin, therefore, can break with inaccurate circulation

Now this rubber egg can be enlightening through