We make an incubator for quail independently. Incubator for releasing quail mesh for quail eggs in incubator

Content:

People have long acquainted with excellent taste and healing properties of egg products received from quail. Their dietary value is largely chicken, and they are losing only because of small weight and size. Thanks to the value of products, more and more breeders begin to explore quail. The main task here will get a full-fledged young, using home incubators. These artificial "nasal" can be purchased in a specialized store or make it yourself.

Varieties of equipment

Before grabbing for the work and instill a home-made incubator or choose the desired model in the store, you must familiarize yourself with the fact that such cars are. There is nothing difficult in this, and therefore it should not have difficulties with an independent assembly of the incubator.

Most of the machines are hermetically made drawers, where trays are installed to bookmark the egg products. The inner cladding is performed from thermal insulation materials, elements of heating and the ventilation system of the forced type. To make the incubator with your own hands, you can take advantage of various materials, even old and unnecessary, give them a second life.

The most economical option is to use foamflast. Plus such a model - the ability to do without additional insulation. But if the usual cardboard box or plywood box without insulation, it will not be possible to create a good model.

To date, both domestic and foreign companies are engaged in the release of all kinds of incubators. There are simple cars where eggs must be turned over with a manual way. A more complex design is a model equipped with a temperature controller, as well as a humidity indicator inside the incubator.

To make an independent device that can compete with the factory analogue, the farmer will have to consider the addition of additional options for its machine. It can be a fanning system forced type, heated fluid (so that humidity is maintained at the desired level if the electricity is turned off) and the automatic thermostat. All listed functions will greatly facilitate the service of the incubator in the withdrawal of young.

Selection of models

Before making a purchase, it is recommended to familiarize yourself with the simple rules that will allow you to choose the most optimal model. It is useful to know that the incubators designed for large domestic birds can be used to remove the young quail. The only difference here is the form - the grid, which for quail eggs should be with a small cell.

Some incubators are added with special trays for small egg products. If the model is suitable in all respects, but there are no trays, then you should not refuse to purchase: additional details can be purchased separately.

To date, incubators can be divided into three types by carrying out the coup of egg products:

manual;
mechanical;
auto.

The first option includes the cheapest, but more trouble-playing in the model service. Here the owner will be engaged in the coup of eggs alone.

The second designs are more convenient, because Equipped with a mechanical type handle.

The most recent models exempt a person from such monotonous work. All you need to do is to establish a program with a coup of eggs after a certain time.

If we consider these models from the financial issue, the difference between types is not very big. But the surcharge for automation, unambiguous, it is worth: do not have to follow the time and coup on their own.

Independent manufacture

For the manufacture of an incubator, a regular box or a broken refrigerator is suitable.

Both of these options must be equipped with high-quality thermal insulation materials. There are some more important parameters that are presented to the room where the incubator will be installed. The temperature standards must be at least +23 degrees, and directly in the machine this indicator rises to +40.

To ensure the design of the fresh air in the incubator lid, through holes are made. If necessary, they are closed or open, and thus adjusts the level of humidity and temperature indicator so that both of these parameters are optimal. By the way, in the design of the box, the lid can be placed on top.

Before collecting the frame, you need to get the following materials:

sheet plywood;
chipboard sheets;
packing board.

For insulation, a roll insulation or foam is used.

Step-by-step performance

To give the old refrigerator a new life, it is necessary to remove the shelves from it and install trays for eggs. They are manufactured based on the size of the refrigeration chamber when taking into account the quail eggs.

For the insulation of the walls you need to take plates of foam. You also need to not forget to equip the incubator with several ventilation holes (their diameter should not exceed 1.5 cm).

Multiple cartridges for incandescent bulbs are fixed on the ceiling part, wiring is supplied to them.

To conveniently turn the egg products, you can equip the design with a metal lever.

Polyfoam type incubator

For the manufacture of this model, you need to get the following materials:

any drawer;
incandescent lamp;
foam;
plywood sheets;
metal construction grid.

Initially, plywood is used to cover the box. Also, as in the previous case, insulation will be needed (it is for this that the foam is used).

In the bottom part, holes with a diameter of at least 1 cm for ventilation are drilled. To control the incubation process, a glass window is done in the lid for observations.

Directly under the cover, the electrical wiring is set to the cartridges located at the corners of the machine. The junk tray is fixed at a height of at least 10 cm, a foam support can be used. Metal grid is stretched over the trays. Thus, it turns out a box of foam, where you can remove chickens.

How to use a simple bucket under the incubator

Such models are used if you need to output a small amount of quail. The basic requirement for the bucket is the presence of a lid.

The work is performed in the following sequence:

In the lid make a slot that performs the role of the observation window.
At the inside to attach the heat source in the form of one incandescent lamp with a power of 40 watts.
Post the jogging tray.
On the side wall, slightly reaching until the bottom, drill holes for ventilation.
Humidity is maintained due to a small amount of water poured on the bottom of the bucket.
You can turn over the incubation material by inclination of the bucket, not exceeding 45 degrees.

to monitor the temperature inside the incubator, it is better to use a medical thermometer - at street models a high error;
thermometers are located near the egg products, but so that they do not come into contact with the shell;
if the incubator is large, you can use the fan to maintain the desired microclimate;
to obtain accurate temperature indicators, it is recommended to be measured at equal time intervals.

Bookmark incubation material

If everything is clear with the installation of incubators, then it is necessary to deal with how to produce the correct bookmark of the eggs.

Eggs must comply with the following requirements specified in Table No. 1:

Of course, all of the above aspects are very important, but also the owner is recommended to check the selected products with an Osioscope for viable embryos.

As for the direct bookmark, it can be carried out in two ways:

horizontal;
vertical.

At the first time it is supposed to lay eggs on the side and carry out a rotation, rotating products by 180 degrees. In order not to get confused in which way to turn over, you can use special tags. This technique is suitable for structures with the absence of an automatic coup.

With the second version, special trays are used. Eggs are stacked with an acute end, and the products are located with an inclination of 45 degrees.

The features of the incubation regime and the development stage of the embryo can be viewed in Table No. 2:

To get high-quality offspring, it is necessary to comply with the rules for the incubation of quail eggs.

What problems can be faced with the elimination of young

There are a number of reasons due to which offspring may simply do not hatch. Poultry farm it is recommended to get acquainted with them in order to prevent this in your farm. You can most often encounter the following problems:

Quail get an incorrect diet. The lack of nutrients in feed leads to the fact that young people appear on the light of weak, various defects may occur, as well as death in the first month of life.
Lack of fresh air access. Envelopes at the last stages of development requires oxygen, which chicks are obtained through the shell. Without fresh air in the incubator, the death of embryos occurs.
The circulation mode of the incubation material is broken. If there is no turning time in a timely manner, then the embryos simply stick to the walls of the egg and die. An uneven development of the embryo may also occur, which will cause his death immediately after the appearance of the light.
Gas exchange is incorrect. Overheating of the inner chamber leads to a violation of this process, and the embryo is formed incorrect adjacent. The rear side turns out to be a stupid end, and not vice versa.
Long transportation of incubation eggs. Excessive shaking leads to damage to the material, and from the inside.

At regular home conditions, with the help of the simplest tools, make an incubator for quails with your own hands simpler. To do this, it is unnecessary to possess special knowledge of the joiner or locksmith.

What to say, personally knows the case when the usual old woman herself from the old refrigerator made an incubator that has already worked for five years and she is completely happy with them!

Everyone knows the extraordinary benefits of eggs and quail meat, and the demand for them grows every year. Therefore, the cultivation of these birds with the right organization can become a profitable business.

But, unlike the cultivation of other types of feathers, there is some complexity, which is that the females of the quail of the breeds derived in captivity, they absolutely do not know how to cross eggs. But you should not lose heart, there is a way out and it is quite simple and convenient, namely the withdrawal of quail from eggs should be entrusted to the incubator. And here there is another question, namely buy an incubator or make it yourself, i.e. do it yourself.

Buy an incubator for quail or make it yourself?

Very often, the quailing between the small sizes of this bird contain a herd of more than a thousand heads and the question of buying a large professional incubator can already be here, which costs quite expensive at the same time. So what to do? Acquire an expensive technique, which will pay for many months or come intelligent, namely, to make an incubator for quailing with your own hands according to the drawings and projects that are offered in our article and tested by the experience of exploitation of many quail farms.

Incubators there are incubators of various types and manufacturers, but if we talk about available models, then it's just a primitive. If they incubate a small number of eggs, then they can somehow cope with responsibilities assigned to them, but if we talk about a big scale, then here they have already managed to show complete inconsistency. Agree it is very uncomfortable to keep three, four or more incubators in the apartment, constantly watching each separately.

The second option is also not the best of the acquisition of an industrial incubator, but its main drawback is a high cost. Yes, and finding the industrial installation house is also associated with certain inconveniences.

Many quailing workers adhere to the opinions that the price of incubators is more than five hundred eggs is unreasonably high. It is reasonable, since if you disassemble such an incubator and see what it is assembled from what it is assembled, it will be immediately seen that the cost of all parts is separately no more than several dozen dollars. Maybe a little higher, but no dozens of thousand rubles, for which they can be found in retail or online stores.

Another important lack of industrial incubators is that the developers of most models did not bother to take care of the backup heating, in case all of a sudden time, electricity will be turned off. Agree to establish at home Mnielectric station that works on gasoline or dieselopliva is not the best option. First, again, the high price of good models and secondly noise. If incubators are installed in the apartment, then the claims of the neighbors do not avoid. In addition, domestic models are not distinguished by reliability and can bring in the most inopportune moment.

One quailman shared his bitter experience. At the time when he had more than 3,000 eggs in several industrial models in the beginning of spring, turning off electricity for half a day. The mini-power station under the law of meanness was failed and the eggs remained without heating for almost twelve hours. During this time, they managed to cool completely. As a result, out of selected eggs, the conclusion was only forty percent. At the same time, silence was born and almost half of them in the speed died.

It is precisely because of the risk of the emergence and repetition of such situations, many experienced poultry farms are recommended to make incubators for quail with their own hands.

Video "Simplest Incubation System"

Video of the simplest system for incubation.

At the same time, several, such a design, which will be more suitable for the acquisition of one incubator, can be made and in which an alternative heating system will be provided in case of power to turn off the electricity. Many quailing boasts boast of highly outrength in homemade incubators, which sometimes exceeds 90 percent, while they are much more convenient to operate. The most amazing thing is that some designs do not provide for the existence of a thermostat, a humidifier and a fan and however, the leading is high in them, and among the born it is quailing almost no patients and with defects, almost 100% survival!

We make an incubator for quail with your own hands

We bring to your attention one of the projects of an incubator for quailing, which can be made independently.

Decoding

Cap;
Incandescent bulbs;
The door through which trays are removed and cleaned;
Location of trays;
Door of the camera of additional heating;
The container in which hot water is poured;
Capacity for humidification;
Inner wall of the incubator;
Insulated material;
Outer wall;
The direction in which trays can move.

What you need to pay separate attention

There is no secret with such a high outcome, but some points still should be noted separately.

A permanent source of heat, which does not depend on the stability of electricity supply.

For this, on the day, a separate chamber was provided, separated from other parts of the incubator with three layers of plywood with holes. In this compartment there was a separate cover and at the time when the supply of electricity was stopped, hot water was flooded with a special canister for 10 liters. The ventilation was also closed, and the incubator wrapped the blanket.

Such a battery turned out to be very effective and for 12 hours warmly kept well. When the water cooled, it did not make it difficult to warm it again.

The second point is that heat distributed evenly throughout the incubator.

As we know from school, warm air always rises up and eggs should be changed from time to time. In the factory manufacturing incubators from this position, there are constant variables in places of trays (the top is put up and, on the contrary). Also in household incubators, eggs need to be shifted. Those that are in the middle, change places with those that are around the edges. With independent manufacture of the incubator, two heat sources can be provided.

One at the top, the second below. For heating in this case, it is reasonable to use several incandescent bulbs. Power and their quantity you must determine yourself based on the design of the incubator and its size.

The third point is the optimization of the temperature inside the incubator.

To optimize the temperature mode, you can make the bottom of the trays from the iron mesh in order for warm air to pass as quickly as possible. The trays themselves are better to do not stationary, but so that they can be moved. On each row (there were 3), it is not established a single tray, but a pair, and their size is 1/3 of the row area.

In this way, it was possible to solve the question of temperature fluctuations, because the eggs were arranged all the time in the middle of the incubator and incubation passes in the best conditions. So that during the rotation of the eggs, the incubator did not have a quick cooling of the incubator, the cover is not made in the side part, but in the upper and on time it was necessary to move the upper trays to the sides.

Summarizing should be noted the main points, namely:

Collect the incubator housing for quail, can almost from any material that you or will like or just be at hand, namely:

plywood;
boards.

The design is insulated using foam or other or insulation.

Ventilation and temperature control, provide holes in the upper lid. The number of holes is installed experimentally. You should also provide special corks that can be closed. Starting heating should occur with the help of light bulbs, and in the case of disconnection of electricity as an additional heat source, a container will be required to be filled with hot water.

Understanding the main principles of incubating quail eggs and applying them in practice, you will be able to assemble a good incubator for any number of eggs.

In a nutshell, the incubator is an ordinary box made of heat insulating material, which provides a heating system and special trays on which eggs are located.

One of the main advantages of the incubator made with your own hands is that it will cost you practically at the price of the materials, of which it is assembled. Apart from this, the size of this product can be made such that it will fit better under the place in which it will stand.

The options for manufacturing incubators set, in our country there has never been a shortage of light heads and skillful hands. What kind of design to give preference to your case exceptionally.

Making an incubator in which only quail eggs will be incubated to be borne in mind that they are three times less than ordinary chicken, therefore cells in them should be much smaller.

Incubator for quail eggs is done, as well as for chicken. Collect excellent incubators, both from old refrigerators and ordinary cardboard boxes. Basically humble about good heat insulation. Another building of the incubator, which has perfectly proven itself in many farms, consider in more detail. Namely, consider it step by step.

Reserve Heated Incubator Project

To make the incubator with their own hands on the project of a famous poultry far, you will need a little smelting, ordinary tools and inexpensive materials. Immediately note the high efficiency of this design. Its main differences from other can be considered the equipment of the incubator tank with water, which is the heater and functions even when electricity disappears.

Tools and materials

To assemble the incubator with your own hands, you will need the following:

metal water tank;
plex;
100 watt bulbs;
cartridges used in conventional chandeliers with outdoor nut;
crane;
water tray;
five bars (wooden), they will be the base of the frame, size 40x40;
trays for eggs;
metal grid cell 13 to 13;
mesh from Capron;
glass;
electric drill;
foam for insulation;
sheet dvp;
glass styling.

Assembly

To do everything correctly carefully learn the instructions and follow all the instructions:

First, it is necessary to make an element for heating. Water tank. If there is no finished capacity of the appropriate size, you will have to make it yourself. To do this, we need a galvanized with a thickness of 4 millimeters. From the pipe (d \u003d 4 inches) we make the upper nozzles (H \u003d 30 millimeters). Next, we will need welding, which is brewing them in the upper roof of our container.
After welding, it should turn out the side, which is necessary as a plexion lamp limiter. Plexus thickness is about five millimeters. Now it is necessary to cut a pair of disks from the plex. Outdoor - d \u003d 95 millimeters, another size as a cartridge. Through the plexl parts will observe.
Pour water into the container.
Now you need to lower the flasks of the bulbs into the water on the length of the cartridge.
In the side of the tank you need to make a tap for draining water.
The upper part of the tank is insulated using foam plastic, the thickness of which is 40 millimeters. If the electricity is turned off, the temperature for 12 hours may decrease no more than 1 degrees.
Next, we turn to the installation of the structure, which consists of a wooden frame, assembled from five bars.
Places for laying eggs make from metal mesh with cell size 13x13 millimeters. Top with a mesh from Capron on her.
Now you need to make an observation hole in the front wall and protect it with double glasses.
At the bottom of the case you need to make nine holes with a diameter of twelve millimeters for ventilation. The same holes and the same diameter we make in the upper part.
Top warming with foamflast, and then fiberboard.
The bottom of the tray located downstairs is made from the glassstolite, the thickness of which is 2 millimeters.
Fix the bottom tray with the help of screws from below.
Now on the tray you can put a saucer with water.
After installing the thermometer, the work can be considered complete.
All incubator is ready and they can be used. Before laying eggs, check how it works and keeps the temperature.

Video "Incubator of foam"

In this video, it is shown how you can make an incubator for quails with your own hands from the foam.

Five more projects of homemade incubators

Check out five more simple, but quite practical projects, perhaps some kind of suitable for you.

Project number 1 (from wooden bar and plywood)

In the lid we make a glass window. It is necessary in order to be able to observe how incubation passes.

This project provides for the heating element a pair of light bulbs of 40 W. Light bulbs can be more, the same and other may be their power, it all depends on the dimensions of your design. If the lid is located at the top, the light bulbs need to be installed slightly below it.

At the bottom of the incubator, you need to make holes for ventilation. The egg tray needs to be located approximately at a height of 10 cm from the floors. The easiest way is to put a tray on the remaining pieces of foam. The design of the tray is sufficient. The usual wooden frame, with a grid (cell must be shallow).

Project number 2 (from a bar and plywood with double walls)

This option can be called an improved model of the first. The main difference is that the plywood sheet is stuffed on both sides of the frame. Those. Double wall is obtained.

The ventilation holes are drilled not only at the bottom, but also in the lid.

The resulting space between plywood sheets can be filled with various insulation materials. Not only foam, but also a small chips, sawdust or even a panel. To close the ventilation holes, you need to prepare corks or sheets of metal or ordinary plywood. This is necessary in order to regulate the humidity in the incubator.

Project number 3 (from the old couch)

For these purposes, the old stand will suit. Exceptionally convenient option This is an old bedside table under the TV, as a rule, in them the front door is glass, which will give an opportunity to control the incubation without opening the door once again.

At the top drill the ventilation holes. For heating, as an option is suitable for a regular fan heater.

Floors make from the iron grid. At equal distances, 3 trays for laying eggs are put apart from each other. For their fasteners, a steel plate with in advance drilled holes is suitable.

The plate is better to be attached to the walls with moving fasteners. In one of the walls you can make holes for the handle to turn the trays without opening the incubator. It will also make it easy to change the position of the eggs at the right time.

Project number 4 (from the bucket)

This project is effective if some eggs are incubated at the same time. The frame in this case is not knocked down, and you can do by an ordinary plastic bucket with a lid. To observe eggs in the lid, the window is made.

As a heater, the usual light is suitable, which is suspended at the top of the bucket. The mesh for eggs is fixed in the middle.

The ventilation openings are drilled at an altitude of eight centimeters from the bottom.

To maintain the required humidity, water is poured onto the bottom. This option has another plus, namely the position of eggs in the incubator can be changed, tilting the bucket. Just you need to substitute a twitch or a lump. The angle of inclination of the bucket should not be more than 40-45 degrees.

Project number 5 (from a non-working refrigerator)

This project is widely used and the non-working refrigerator will need to be implemented. The design of the refrigerator provides for not only tightness, but also excellent heat conservation. Egg trays can serve as a shellf for products. Conventional lamps are used for heating.

If there is a desire, the incubator from the refrigerator can be equipped with a device for the coup of trays.

Video "Incubator from a refrigerator"

In this video, it is shown how you can do a great incubator from an old unnecessary refrigerator.

Making an incubator for quail with their own hands need to take into account a few moments.
Do not use the temperature inside the incubator with ordinary thermometers, which measure the temperature on the street or indoors. They are not very accurate, so it is better to use medical.
The thermometer needs to be located near eggs, but in no one should touch the shell. Otherwise, the data will be incorrect.
If the incubator is big, it is desirable to install a fan in it. This is necessary, since the temperature of the eggs are at the top and the temperature of the eggs located at the bottom of the same way. Air circulation running from the fan will restore the balance.
Do not measure the temperature immediately after switching on. Most likely, the testimony will be incorrect. Wait about an hour.

As you can see to make an incubator for quail with your own hands in the most common home environments. The main thing you will not only save a decent amount, but also get a convenient device in operation.

Video "Excellent incubation system for little money"

How to make an incubator, while not spending hard.

Make a homemade incubator for quail growing is quite easy. With this task, any person who does not have specialized knowledge and skills in wood processing can cope with this task. If you consider much benefit from meat and eggs of quail, then the solution to the problem of removing the offspring of such a type of birds is very relevant.

The huge use of ceremony eggs for the body is now known to all mankind. That is why the main task of breeding quails can be considered obtaining precisely Yaitz. The main difficulty lies in the fact that the females of the most egg standards are considered fairly mediocre. For this reason, it is necessary to make huge efforts to remove the offspring. In this difficult, the homemade incubator for quails will be able to help.

How to choose an incubator for quail

Natural Incubation Method Quite often is ineffective for such reasons:

in the poultry farming, it is hard to find a good zoom;
the number of eggs that are capable of sit down one chamber is limited.

And also when a person intends to breed quails, he may encounter a rather important problem, because bird chicks have a very high price. In order to save money, it is worth buying quail eggs for incubation. In this case, you will need a good and reliable incubator, because the natural incubation can be held all year.

When a person wants to buy a factory incubator, then it is necessary to take into account some very important moments. The most economical models are polyflast incubators. Such products do not have great strength, but have a rather low price. When a person wants to buy a high-quality and expensive incubator, then you should calculate, after how much time he will be able to recoup. Specialists advise first to buy a cheap model, and when a person will receive good profits, then you can buy a road and high-quality apparatus.

When there is a desire to purchase a device with the function of an automated coup of eggs, it is worth considering that its price is quite large. Such models are used to breed quail in large farms. And also such a device has impressive sizes. That is why when it is possible to purchase an incubator of this kind for domestic use, it will be equipped with a mechanical reversal mechanism, which will need to be carried out with your own hands using a special lever. Quail eggs are able to break or crack such work. As well as the main type of breakage of incubators for quails is the failure of the coup system.

How to make an incubator for quail with your own hands

When a person decided to make a homemade incubator for quail, then it can be collected from broken refrigerator or ordinary box. However, do not forget about high-quality thermal insulation. There are certain important rules that apply not only to the product, but also to the room. The optimal temperature of the room is obliged to be about 23 degrees Celsius. In the homemade incubator for quails, the temperature should be about 40 degrees Celsius.

To provide high-quality ventilation in the device, then in the lid you need to make several holes. These holes can be closed or open when the need to adjust the humidity and temperature to the optimal indicator will appear.

For assembling an incubator frame These materials can be used:

plywood sheets;
sheets of fiberboard or chipboard;
punching board.

To warm the product well, any kind of rolled insulation or simple foam is perfect. Before starting assembling a self-made incubator for quails, it is worth familiar with all the methods of its manufacture. After that, you can choose the optimal method of assembling the product.

How to make a foam incubator with her own hands

To make a homemade incubator for quailMaterials will need:

an ordinary incandescent lamp with a capacity of about 40 watts;
any box;
styrofoam;
plywood sheet;
metal construction grid.

First, the box is squeezed by pieces of plywood. Do not forget about good insulation. To make it, you can apply pieces of foam. In the bottom you need to do several small through holes. Their diameter should be at least 1 centimeter. In the homemade lid it is worth making a special glass window. This will help to monitor the state of eggs and temperature in the product.

In the box under the lid, it is necessary to pave and install the electrical wires with cartridges that are required to be located in the corners of the device. On 10 centimeters above the bottom you need to secure a special tray for eggs on a foam support. Next, you need to pull the iron grille on top of this tray. Now the homemade incubator for quails from foam can be considered ready for use.

How to make a water incubator with your own hands

A similar design of the home incubator for quails was developed for a very long time, and its popularity is only increasing every year. The heating element is the usual water Capacity. The advantages of such a product can be considered uniform heating of eggs and complete independence from electrical power supply. When electrical energy is turned off, the chicks in the incubator are continued in comfortable conditions. The assembly of such an apparatus is quite laborious work, but the result is worth the time spent.

From trimming of pipes of the same diameter, nozzles are made by a length of about 4 centimeters, which are welded into the metal container so that the inner holes are 1.5 centimeters less than the diameter of the nozzles. The resulting side is necessary to set the plumbing limiter of the lamp.

From the sheet of plex a thickness of 0.6 centimeters, 2 disks are cut. The outer disk should be a diameter of about 10 centimeters, in the size of the internal disk is obliged to correspond to the dimensions of the lamp. Such plumbing details are applied as indicators of starting heating. And also they help control the water heating process. All flasks of incandescent bulbs with a capacity of about 100 watts must be lowered up to cartridges.

From the side of the device you need to install the valve, which is designed to drain the water. For high-quality insulation, which will be able to maintain a high temperature of water to 14 hours, it is necessary to climb the tank made of metal by conventional foam. Further, the iron container is filled with water over the lid, and the product can be used for its intended purpose. For the manufacture of a framework of the device, you can apply the design of wood that is collected from bars.

Incubator from girlfriend with their own hands

To make a home incubator for quail With your own hands, you need to find a box of foam, a small leaf of aluminum and tin cans. It is also worth buying a few 15 watt light bulbs and a computer cooler.

A high-quality cooler is needed in order to maintain the optimum temperature in the product, regardless of the installation site of the incandescent lamp. Plywood is necessary to fasten the lamps and coolers on it, because the fastening to the foam does not differ in reliability. Special screens are made from tin cans so that the thermal energy from incandescent bulbs is dissipated throughout the product.

The cooler is fixed at a certain angle so that it can be able to carry out all the lamps. In the lid of the box of foam, you need to cut a hole. Next, with high-quality glue, it is necessary to fix a small piece of glass on it. It is necessary for comfortable control over the state of quail eggs. To the homemade home incubator well kept the optimal temperature, it is necessary well insulate it from inside with foil polyethylene. Quail in the incubator need the influx of fresh air. Therefore, you need to make some small holes in the box.

To turn the tray with quail eggs, on the bottom of the foam box, it is necessary to place a special lattice with a small cell size. Absolutely all pointed edges of the tray are scolded with a file. Next, a small piece of metal wire is attached to the lattice, which is necessary to turn the tray with quail eggs. You must not forget to put a small container with water into the incubator, which will maintain the optimal level of humidity.

To adjust the temperature inside the mini-incubator worth applying good digitalj. controller. For comfortable feelings of chicks in the device, it is necessary to constantly maintain the optimal level of air humidity. That is why you need to put a special psychrometer in the incubator.

Before bookmarking into the manufactured apparatus of the first batch of quail eggs, it is necessary to test the conditions in it. It is worth tracing how it warms up and how ventilation is carried out. Eggs are able to spend a small amount of time in cool conditions, but high temperature is dangerous for them. Huge importance for good incubation has an indicator of egg quality.

It is necessary to spend a small amount of time to quail possessed good health and strong physique. Additionally, you can see numerous videos from the network, which show the process of manufacturing various models of home incubators with your own hands.

ATTENTION, only today!

Turn

When equipping an incubator with different components, almost every host pays more attention to thermostators, humidifiers and fans. But, the grill for the incubator is an equally important element.

For the proper functioning of the device and high levels of chicks, you need to choose a special grid, without which the bird will not get.

Purpose lattice

The cultivation of young birds requires creating specific conditions.

The incubator is a special apparatus, which recreates natural indicators of temperature and humidity to ensure the formation of the embryo in the egg and its appearance.

Eggs on the grid

The lattice for quail eggs to household incubators is one of the most important components of such equipment.

This kind of grid is a key element of the rotary mechanism.

In order for the egg evenly to heat up from all sides and received a sufficient amount of heat, it is necessary to turn it from time to time.

The incubator grille ensures the fastening of the egg in the correct position and its movement in the process of all incubation.

That is, it is she who becomes the main fastening that is responsible for the location of the future chick.

Special grids are mandatory included in the design of all types of incubators:

In automatic lattice models are fully equipped with digital regulation, which eliminates human intervention for the coup.
In mechanical devices, regulation is carried out by itself.

Views and sizes

Types of grilles depend directly on the size of the egg, which will be placed in it:

chicken;
duck;
eggs quail, etc.

The size of the lattice cell is completely dependent on its type. So, the smallest area will be at grids for eggs quail, the greatest - for goose.

Standard measurements have the following form:

to remove quail - 0.35 x 0.45 cm;
for cutting holes - 0.67 x 0.75 cm;
for ducks, geese - 0.75 x 0.86 cm.

Also, the types of grids depend on the material from which they are manufactured.

Allocate:

metal;
wire;
plastic.

It is these three species most often used in the farm due to their strength and simplicity in use. The best option is precisely metallic mesh. This is due to the fact that the material can withstand heavy loads, has high strength and long service life.

Example of metal lattice

The constant effect of high temperatures does not cause cell deformation. But, minus is that with high humidity, which is necessary for incubation, with time the grid is corrosion. The same problem is characteristic of wire lattices, which in addition to this is prone to deformation.

The plastic option is no less attractive. It is not amenable to corrosion, it is easy to wash and weighs little. But, the main drawback can be deformed during use.

How to choose a grid for incubators?

In the product market, you can meet many embodiments for incubators. What better to buy a grid? It is necessary to proceed from the incubator model itself, the frequency of use and the amount of brood.

If you plan to load more than 40-50 eggs into the device, it is better to give preference to metal structures. They are more durable and withstand any load. Plastic models can be selected for small incubators.

Plastic Incubator Grid

Most often, they are used for growing 10-20 eggs. But, if the plastic is high-quality - it can come up for large loads.

When choosing a grid for the incubator, pay attention to:

lack of defects in the case (cracks, recesses, hollows);
the material from which it is made (you need to choose the most high-quality raw materials to which there is a certificate from the manufacturer);
consider the specifics of the incubator itself for which the grid is selected;
choose a separate lattice for each type of eggs.

Incubator Non-drying is one of the most common models of devices. Manufacturers produce metal meshes for eggs of different capacity:

70 chicken;
150 quail.

Also, there are options for exotic birds (peacocks, ostrises). Their capacity is from 15 to 30 pieces. It will cost such options more expensive than everyone.

Market prices

View the cost of the grille for different types of eggs can be in the table.

Other designs are used for incubator Cinderella, rather than for the previous apparatus. For quail eggs, the cost of the tray will cost 350-400 rubles at 140 seats, for duck / goose - 380-420 rubles for 40 seats, for chicken - 400 rubles per 100 seats.

Be sure to take into account the Incubator model. Not all grids have a standard form. What is suitable for one incubator will be a simple trust for the other.

How to make a grid personally?

Simplify the task with the search for eggs for eggs, if you do it yourself. The grill for the incubator do it yourself is simple, the main thing is to know the main nuances of manufacturing and selecting materials.

First you should decide on the material. Make a design of metal or plastic will not work independently, so a metal mesh is considered the optimal option. It is easy to use and easily acquires the necessary form.

Before starting work, prepare:

The size of the grid itself directly depends on the internal perimeter of the incubator for which the tray is manufactured. It is important to pay attention to the cells themselves, since for each type of eggs they will be different (quail - 0.35 x 0.45 cm; smoke - 0.67 x 0.75 cm; geuses - 0.75 x 0.86 cm).

For quail eggs, a mosquito net is often used, but this is not the best option, since it will not be able to repair the eggs in the desired position.

Manufacturing instructions:

tubes (boards) need to be combined into the frame. If they are wooden, then you can make it nails, metal is better to cook each other;
a grid is tensioned on the finished design frame. Make it you need the most tight enough so that it does not save;
parts are attached with the help of glue or self-tapping screws (for wood) for fastening the tray in the incubator itself.

Option 1

Option 2.

Such lattices are suitable for the incubator Cinderella, Nonaching, etc. The main thing is to take into account the internal design of the apparatus. In such a case, it is better to pre-try them to old lattices.

The main advantage of the self-made design for the incubator is that it can be made from undergraduate materials, without spending additional funds. But, there are a number of key minuses:

little service life. With frequent use, the grid begins to sag or erased;
due to the high humidity in the attachment incubator weaken and begin to squeeze;
when saving the design, the percentage of hatched eggs is reduced, since those in the incubation process concerns the walls or each other, which violates the necessary conditions;
when used on the basis of a tree, the service life is significantly reduced: under the influence of moisture, the frame is deformed, rotates;
too strongly stretched grid can burst.

Video

View video about lattices for the incubator can be here:

← Previous article Next article →