Front panels under a brick. Advantages, types and methods of mounting panels for brick walls for interior decoration Brick hardboard

The decoration of the walls inside the premises of the apartment, as well as the facade of the house with decorative bricks or material imitating brickwork, has never gone out of fashion. However, unfortunately, it is not always possible to use real brick for interior decoration of housing, as it will make the floor slabs of multi-storey buildings heavier. In addition, it is not so easy to make an ideal masonry “for jointing”, because this requires at least a minimum experience of a bricklayer.

It is much easier to use other interesting ways to achieve the desired result. Imitation of a brick for can be made in different ways and, characteristically, is available for installation by anyone, even a novice finisher.

The main types of brick imitation and the technology of working with them

Given the fact that brickwork has been popular for decades and has been used in reproducing various interior styles, manufacturers have not missed this moment and have developed several types of material that can replace natural brick.

Such a finish is made in different forms - it can be flexible or rigid tiles that have the size of the end side of a brick, or large wall panels that cover an entire section of the wall at once, made from polyvinyl chloride (PVC), MDF or fiberglass.

Flexible tiles "under the brick"

Flexible tile that imitates brickwork is great for interior and exterior wall decoration. This modern material is not only decorative, but also a protective coating for surfaces and has a number of positive qualities - this includes resistance to external atmospheric influences, impact resistance, vapor permeability, inertness to microorganisms, as well as to ultraviolet radiation, and, of course, aesthetic appearance and a fairly simple process of processing and installation.

"Flexible brick" is easily mounted not only on straight flat surfaces, but also perfectly bends around the outer and inner corners of the premises.

A similar material is used for wall decoration inside apartments and houses, in particular, rooms such as hallways, corridors, kitchens, living rooms, loggias. It is also suitable for external, facade walls. It is very convenient to use such tiles for facing columns, fireplaces, small architectural forms, as well as in any areas where such a design is conceived. Regardless of the complexity of the surface configuration.

The tile can be used to finish the entire wall completely or fixed to its individual sections. Since the material has many colors, it is possible to make the finish monophonic or use tiles of different shades, harmoniously combining them with each other.

Installation of "flexible brick"

Installation of flexible tiles does not require complex electrical tools. It will only be necessary to prepare:

- smooth spatula 120÷150 mm wide - for mixing and applying glue;

- notched trowel with a comb 4 mm high and 150 ÷ 200 mm wide;

- building level with a length of 1000 ÷ 1500 mm;

- a ruler with a length of 1000 ÷ 1500 mm;

- marking colored cord for beating lines;

- a simple pencil;

- powerful scissors;

- a brush with a width of 12 mm for leveling the mortar in tile joints.

From materials other than tiles, you will need a primer for walls and a special

For installation, a dry mortar can be used - ordinary tile adhesive, but it is more convenient to use a ready-to-use composition packaged in plastic buckets. In any case, when purchasing a tile, you should immediately consult with the seller about the adhesive suitable for a particular material.

In order for the masonry to be even and neat, the wall must be put in order before installation begins, by cleaning and leveling its surface. After the leveling mortar has dried, the wall must be primed with an antiseptic compound, which will give the materials higher adhesion and prevent mold from appearing under the cladding layer in the future. When the primer is dry, you can proceed to the installation of tiles.

In addition, it is necessary to take into account the fact that installation work must be carried out at a temperature not lower than +5 degrees, otherwise the adhesion between the materials will be insufficient, and the tile may subsequently begin to peel off from the surface of the walls.

Brick imitation prices

brick imitation

The first step is to draw the surface of the wall into even zones, along which glue will be applied and the tile will be fixed. If the entire wall is to be completely lined, then it is imperative to beat off the upper and lower limiting lines.
The glue is not applied to the entire surface, but to separate lined zones, which are about 1000 × 500 mm. The layer of adhesive mass should be approximately 2 ÷ 3 mm - it is applied with an even spatula, and then distributed over the entire area to be lined with a notched trowel so that furrows of the same height are obtained.

The tile is glued in order, and if the first of the rows starts with a whole tile, then the second - with a half or one third of the "brick", depending on the desired location of the masonry joints.

Dividing a “flexible brick” into parts at any angle, without the use of any power tools, is quite simple: it is marked and cut along the line with ordinary scissors.

The seams between the rows can have different thicknesses - this parameter will depend on the preference of the master, but usually the clearance is left at 10 ÷ 12 mm. The selected size of the seams is taken into account immediately when marking the wall into zones for installation.

"Flexible brick" easily bends around ledges formed at any angle, as well as internal corners or rounded walls, if any, on the finished surface.

When the intended surface area is tiled, you must immediately level the mortar in horizontal and vertical joints, otherwise the glue will seize and it will not be possible to accurately level it. The smoothing of the solution is carried out with a relatively thin brush of medium hardness, lightly moistened with water.

The fact that flexible tiles do not require additional purchase of grout for joints can also be safely called the advantage of the material, since you do not have to make extra costs.

Video: flexible facing tiles with excellent imitation of clinker bricks

Rigid facing tiles "under the brick"

Clinker tiles

Clinker tiles are not used for interior wall cladding as often as other types of material that imitate brick, as it has a fairly high price. It is often purchased for facades, given its highest performance. However, it can also be used for interior decoration, especially if you have to line a stove or fireplace.

It is made from natural highly plastic clays, without the use of artificial dyes and plasticizers. The raw material is pressed and fired at high temperatures reaching up to + 1150÷1200 degrees. Thanks to this, clinker tiles are an environmentally friendly material with unsurpassed natural qualities of durability and reliability, which are multiplied during the production process.

Such a finishing material is excellent for both interior and exterior cladding. It has a very low moisture absorption coefficient, high frost resistance and wear resistance, inertness to temperature extremes and almost any chemical attack.

The decorativeness of clinker tiles is not inferior to its physical and technical characteristics, since the variety of design options allows you to choose the material for every taste and style of the interior of the premises or the facade of the building. Finishes can have a rough, glazed or natural, unfinished surface. On sale are tiles of different sizes and shapes, and this factor also allows you to realize the most daring design ideas.

Installation of facing tiles "under the brick"

As mentioned above, all tiles that have a certain rigidity are mounted on the wall in approximately the same way. The work will require the same tools as for the "flexible brick", and in addition, to cut this material, it will be necessary to prepare a hand circular saw or a grinder with a stone disc.

The work on laying the cladding from this type of material is more complicated, since the finish already has a significant weight, and after installation it requires careful sealing of the joints between the tiles.

The lining process is carried out in the following order:

Laying should be carried out on a prepared, primed and relatively even wall.
The marking of the wall surface is carried out in the same way as for the installation of any piece of facing material: straight lines are beaten off along the upper and lower levels of the masonry, then, it is recommended that the entire distance between them be calculated and divided horizontally so that the intended number of rows can be accommodated in this area masonry, with the obligatory consideration of the thickness of the seams between them. It is especially important to carry out this process if there is not enough experience in wall cladding - marking will help to make the masonry perfectly even.

When marking, 10 ÷ 12 mm should be allocated for each of the seams between the rows.

Further, the adhesive mass is prepared, which is selected in accordance with the type of material on the basis of which the finishing tiles are made.

The laying starts from the bottom row, which is carefully verified by the building level, since the accuracy of the entire wall cladding will depend on its horizontalness. If the first row starts with a whole, then the second and all subsequent even rows with ½ or ⅓ tiles.
Further, glue is applied to the wall with a spatula with a layer of 3 ÷ 4 mm. After that, the mass is distributed with a notched trowel, which leaves grooves of equal height, ensuring the most even distribution of glue when pressing the tile. When laying some heavy types of tiles (the same clinker), it is additionally recommended to apply glue on the back side of the facing material. Therefore, before starting work, you should definitely study the instructions attached to the package, which clarify the nuances of installing a particular material.

During the installation process, it is necessary to control the evenness of each of the stacked rows.

To ensure that the width of the seams between the tiles on the entire surface to be lined is the same, some craftsmen use special calibrator tabs of the same size. They are temporarily installed between the rows, and after the adhesive mass has set, they are removed and installed again, but already on the upper rows. As such calibrators, you can use a wooden glazing bead or silicone posts.

For facing external corners, special curly elements are used that are able to mask existing chips and make the corners neat and protected.

Upon completion of the masonry and after the glue has completely dried, the seams between the tiles must be securely and accurately sealed with grouts specially designed for this purpose. You can fill the seams in different ways:

- Use ready-made formulations in tubes, using a special gun.

- Place the mixed grout in a plastic bag, and then cut obliquely one of its corners to the width of the seam and gently squeeze the grout into the gaps between the rows.

Unlike PVC panels, MDF trim is not recommended for use in rooms with high humidity, but it is perfect for leveling the walls of hallways, corridors, insulated balconies, and living rooms.

Manufacturers also thought about the design of the corners, making special curly elements for this.

Fiberglass panels

Special mention should be made of fiberglass panels. This facing material is made on the basis of ordinary cement with the addition of glass fiber fibers, which increases the strength of the plates tenfold. For external finishing, panels can additionally be reinforced with metal elements, which increase the weight of the structure, but make it resistant to mechanical stress.

Reinforced only with fiberglass, the panels have a not particularly frightening weight, and dimensions that are relatively compact in thickness. The solution for their manufacture is colored in bulk, so the plates are not afraid of small chips and abrasions. Some manufacturers add colored fiberglass to the molding sand, which is somewhat darker or lighter than the main tone, but in perfect harmony with it - this gives a very interesting effect. In addition, additional application of paint on the surface of already finished and assembled products is allowed.

Well suited for interior decoration, but still more often it is used to transform the facade of the walls of the building.

Environmentally friendly plates do not make the walls heavier, as they have a small mass. They perfectly protect surfaces from moisture and mechanical influences, as well as from the penetration of radio emissions into the house, and have a number of other attractive advantages. However, the cost of such facing materials is quite high, so not every owner can afford such a finish.

Installation of panels "under the brick" on the wall

If the wall surface is sufficiently flat, then the panels can be fixed to it without installing a frame structure. Lightweight PVC boards are glued to a cleaned and primed surface using one of the polymer adhesives. For example, "liquid nails" are well suited for this.

Finishing panels based on MDF have a much greater weight, therefore, in addition to glue, they are fixed on the wall with dowels in four to five places.

Fiberglass panels can be fixed to a flat wall with cement-based tile adhesive.

In the event that the wall surfaces have significant distortions, they are corrected by fixing the frame structure, consisting of metal guides or wooden beams, set exactly in the desired plane according to the building level. Some manufacturers make special subsystems for their products, mounted on a wall or on an installed frame. In this case, panels are hung on special elements of subsystems.

Subsystems can have different designs, therefore, when purchasing cladding boards and their fastening systems, it is necessary to check compatibility and the presence of the attached installation instructions.

It is clear that if it is planned to mount the panels on a subsystem, the frame elements must be located in accordance with the feature of this model.

The simplest type of fastening is plastic panels made according to the principle of siding construction. They have a special perforated mounting plate in the upper part, through the holes of which the plate is fixed on the wall or frame. In this case, horizontal elements of the crate are fixed to the wall surface, at a distance of the visible part of the slab.

Facing brick prices

facing brick

Installation of any cladding panels starts from the bottom of the wall, usually from the corner elements.

Homemade options for decorating walls under brickwork

If you want to save money by making an imitation of brickwork on one of the walls of an apartment or house with your own hands, you can use the original techniques developed by craftsmen.

There are several options that do not require special costs for the purchase of facing plates or panels, and also do not create any particular difficulties in installation:

Independent production of tiles from expanded polystyrene with a thickness of 10 ÷ 12 mm. For this purpose, it is recommended to use extruded material with higher performance than conventional white foam.
Creating a brickwork relief using a stencil.
Reproduction of the desired pattern on the wall using masking tape.

Tile "under the brick" of expanded polystyrene

If it is planned to use the process of melting the edges of the foam plastic in the manufacture of tiles, then work should be carried out outdoors, protecting the respiratory tract with a respirator, since this material is combustible, and when burned and melted, it releases toxic substances.

The first step on the prepared leveled and primed wall surface, with the help of a ruler, a plumb line, a building level and a simple pencil, is the marking of the “brickwork”. The wall is drawn into horizontal stripes and vertical partitions, which determine the size of the brick and the seams between them and the masonry rows.
The second step is to mark the expanded polystyrene sheet on tiles of the selected size.

Then the material is cut into individual elements with a clerical knife. The number of such blocks should correspond to the number of bricks required to decorate a certain section of the wall on which the markup was made.

Further, in order to achieve the most reliable effect of imitation of a brick, you need to work on the resulting tile - this can be done in different ways. Its surface is treated with sandpaper in different or one direction, with a knife or other sharp instrument, notches and grooves are made on it. You can also use a heated soldering iron for this purpose.

Another option is to melt the edges and outside of the tile with a regular lighter or burner. In this case, the front surface acquires soft smoothed shapes.

After painting the tile in the selected color, its relief will be more pronounced. The application of paint can be done before the installation of the tiles or after the wall cladding is fully completed.

Coloring can be done with a brush or by spraying the coloring composition from a cylinder. The main thing is that the paint does not cause the dissolution or softening of expanded polystyrene - it is better not to experiment with organic-based compositions, preferring water-soluble ones.

Styrofoam tiles are laid according to wall markings using liquid nails glue, which is applied to the back surface with three points 3 ÷ 4 mm thick.
The final step will be the design of the seams between the bricks and rows.
It should be noted that if the design does not provide for the selection of tile joints in a different color, then the lining can be painted even after the grout solution has dried.

Imitation of brickwork using a stencil

In order to make an imitation of brickwork using a stencil, you will need a cement-based mortar. It is best to purchase it in the form of a ready-made dry mortar for plastering, as it already has all the necessary additives that make it plastic and easy to work with.

The solution can be made independently from two materials - it is a plaster and adhesive cement mixture, which are taken in 1: 1 proportions. To increase the plasticity of the solution, add a tablespoon of liquid detergent to 5 kg of the finished mixture.

The wall must be well cleaned, primed and dried.
The solution can be applied to its surface with a wide spatula or simply with a rubber-gloved hand. The thickness of the applied layer should be equal to the thickness of the stencil strips. This moment will depend on what surface the brick should have - smooth or rough.
Further, so that the stencil does not have “stickiness” with a layer of applied solution and is easily separated from it, it should be moistened with water - this can be done with a sponge or a damp cloth. If the stencil is made of rubber, then you can simply dip it into a basin of water, but in this case you need to wait until its excess stacks, otherwise excess moisture can ruin the whole job.
After that, the stencil is pressed against the applied fresh plaster and gently pressed, so that the relief of the brickwork remains on it.
Further, the stencil is removed and applied further, next to the freshly pressed relief. Here you need to try and attach it so that the masonry is even, and its horizontal seams do not skew.
When the relief is applied to the entire surface, it is left to dry completely.
After drying, the wall should be completely covered with one color - usually light shades are chosen for this, since it will be easiest to apply any color on them, as well as highlight with a dark shade or leave all the masonry seams light.

Painting imitation brickwork is already a creative process, so you can afford various fantasies. In this case, of course, it must be borne in mind that the chosen color will set the mood for the entire interior of the room.

Creating a brickwork relief using plaster and masking tape

For this technology of reproduction on the wall of imitation of brickwork, the composition of the cement plaster mortar and masking tape already mentioned above will be required. Some craftsmen even use electrical tape, however, it sticks worse to the wall, and high-quality masking tape has excellent adhesion to any surface.

The width of the tape should be no more than 14 mm, and if you could not find an adhesive tape of this width, you will have to buy a wider one and carefully cut it right in the skein along the width in two. If its edges are not perfectly even, this is not at all scary, since this factor will not affect the accuracy of the relief, but rather, it will play into the hands.

The first step is the prepared surface of the wall to be lined under the brickwork.

Further, masking tape is glued along all the marked lines on the wall. It should be fixed in such a way that the edges of the horizontal segments of the adhesive tape extend beyond the edges of the surface being formed, and the solution should not be applied to them, and the vertical segments should be well glued to the horizontal ones, always on top of them.
Then, on the surface of the wall, over the pasted lattice of adhesive tape, using a wide spatula, a solution is applied, with a layer thickness of 5 ÷ 6 mm - the height of the relief will depend on this parameter. Do not apply too thick a layer, otherwise you will have to cover the seams with grout.
After applying the solution completely to the entire wall, you can walk along it with a wet rubber glove to create a surface texture. If you plan to leave the surface of the “bricks” even, then you should not touch the mortar layer.

The most interesting stage in this method of imitating brickwork is the removal of masking tape, since after this operation the relief of the wall will be immediately visible. Several strips of adhesive tape are picked up from one of the free sides and begin to gently peel off from the wall, and as a result, seams between the “brick tiles” are formed in place of the peeled off tape. After removing the tape from the entire surface, the wall must be left to dry completely.

It is recommended to dry the wall before painting - this operation will make the surface more pliable for the next stage - painting, as the paint will lie on the surface evenly and will not be absorbed into the plaster layer. What shades to choose for the wall - it already depends on the preference of the master.

Video: How to imitate brickwork with plaster and masking tape

From all of the above, we can conclude that the construction market has an overabundance of various materials that ideally imitate brickwork or other stone surfaces. Sometimes the quality of the imitation is such that, when finished, it cannot be distinguished from real brick in terms of texture and color. Well, if the finished tiles or panels do not fit into the family budget in any way, then it is quite possible to use one of the more economical methods and decorate the wall using affordable materials for this.

To give a cozy and stylish look to their homes, homeowners use various materials. Their choice is extremely wide and varied. The greatest popularity in the construction market was won by finishing products from natural components: stone, wood, brick.

This is due to their safety for human health and the environment. In addition, the apartment, finished with the use of such materials, looks very cozy and has a peculiar charm.

Unfortunately, the use of natural materials intended for finishing the walls of an apartment is not always possible. This is due not only to the rather high cost of such products, but also to some technical features.

For example, when planning a brick partition, keep in mind that it will have a solid weight. However, plastic panels with the desired pattern will help to decorate the apartment in the required style. Among them are decorative brick-like panels that are in demand by designers and their customers.

The technologies used in their creation make it possible to make a copy that is visually almost indistinguishable from a brick.

The difference between the panels in the form of manufacture

Panels imitating brick are found in building and finishing materials stores in several forms:

Sheet products. They are used for finishing walls and partitions. The positive results of using just such panels include the smallest number of joints. During such a finish, the house will be protected from the effects of the external environment (precipitation, high and low temperatures). As a rule, the thickness of such panels rarely exceeds 3-6 millimeters, and the length varies from 120 to 240 centimeters.
Brick tile available in various sizes. The plane of its application is to highlight a section of the wall or to realize the designer's idea in the form of a drawing or abstraction.
For sheathing the basement and the visible part of the foundation, manufacturers offer decorative brick-like panels in the form of long sheathing boards. Dimensions, which can reach 50 centimeters in length, and rarely exceed 3 centimeters in width.

For the manufacture of such decorative products, various materials are used:

Products created from pressed wood chips, better known as decorative MDF wall panels. The required strength of such panels is achieved during the manufacturing process, when, under the influence of high temperatures, the wood releases ligin, a substance of increased viscosity.

PVC panels. A certain amount of a special softener is added to PVC products. PVC finishing materials have excellent strength and moisture resistance. Their advantages also include resistance to sudden changes in temperature, long service life. Such wall panels are used for both internal and external finishing works.

The use of brick panels in the interior of the apartment

Imitation brick for interior decoration is widely used by designers in a variety of cases. However, there is something common to all types of panels used for interior wall decoration.

Almost always, finishing experts recommend paying attention to PVC panels. This is due to the fact that PVC products are distinguished by an extensive range of colors and paints. For example, plastic brick tiles can imitate different types of bricks. In addition, PVC products allow you not to think about additional protection in the form of paint coatings. To clean them, standard detergents are used, which are found in the arsenal of every housewife. Thus, PVC materials are ideal for finishing sanitary facilities, bathrooms, corridors, kitchens.

To finish the working area of the walls of the kitchen, panels imitating white brick are suitable.

Imitation of brick for interior decoration, can be installed in any direction, while attaching them to the wall can be done using:

Wooden crate. This method of fastening is used if the surface of the walls has noticeable errors. In order to fix the panels, you need self-tapping screws, a screwdriver and the profile crate itself.
glue mixture. When using glue, it is assumed that the walls have a perfectly flat surface. If the wall surfaces have significant defects, they will need to be corrected with puttying or plastering. Otherwise, the cladding fasteners will be of poor quality and short-lived. When buying glue, pay attention to its components, this affects the method and place of application. For fasteners, a mixture of various thicknesses is used, and you should not exceed it, this will affect the quality of fixation.

The outer part of PVC panels can visually copy brickwork, this is due to the fact that a special mold is used for its production.

In the process of creating such a product, paints of increased durability are applied to its surface or a special film is glued, creating a three-dimensional effect. Boards made using the latter method are called "laminated".

These products are made by pressing wood shavings and sawdust using the dry method at high pressure. Modified special resins containing a small percentage of formaldehyde act as a binder component. It is understood that the composition of the panels during operation will not harm human health.

MDF panels are widely used for finishing balconies, gazebos, porches and other similar objects. However, the special qualities of these finishing materials allow them to be used for interior finishing work. For example, moisture resistance makes it possible to use MDF panels to decorate a bathroom or kitchen. However, when using brick-like cladding to decorate corridors in public buildings or hallways, consider protecting them. The anti-vandal coating is applied to the facing part of the panels only in exceptional cases.

Brick tiles are great for decorating office space and living rooms. A special advantage is their possible combination with other materials. For their installation, the frame method is mainly used. In this case, the installation of panels will not take much time, and the presence of construction debris will be minimal. The advantages of this type of decorative materials include:

Reliability and sufficient strength, which facilitates the installation of panels on the crate.
Brick tile made of MDF allows you to hang shelves and light cabinets on it.
MDF panels are not harmful to the environment.
Does not affect human health.
Affordable price.

Types of panels imitating brick

Panel manufacturers offer their customers products from materials such as plywood, drywall, fiberboard, fiberglass, hardboard, HDF. Each of them has certain advantages and disadvantages. Some of these decorative boards are unstable to temperature or moisture, others are unnecessarily brittle. As a result, not all wall surfaces can be designed with their help. Therefore, in terms of distribution, they are inferior to products made of MDF or PVC.

Brick finish. Styles

The most common brick finish in the design of some rooms of the classical style, as well as rural buildings. These styles include: Romanesque, English, Gothic, country and others.

The expansion of the finishing materials market by manufacturers has led to the fact that when decorating a house or a room in a certain style, it is not necessary to leave the walls without additional processing. Not so long ago, on the shelves of the store you could only find wallpaper with a brick pattern. Naturally, there was no talk of any realism. Brick tiles, which are sold today, outwardly practically do not differ from natural brickwork.

Professional designers when decorating the walls of residential buildings or apartments adhere to several rules:

Finishing all wall surfaces with brick-like panels is worth it if there are several recreation rooms in the house. The interior of the room, made in this style, will remind you of an old knight's castle or a medieval tavern. However, a modern urban dweller, being in such a room, will constantly feel emotional discomfort.

By decorating only one wall or partition with panels, you will not overload the interior and create a certain psychological mood. Brick tiles imitating white brick or light colors are suitable for the walls of an apartment - a studio or a one-room apartment.
In bright colors, you can decorate only a section of the wall to draw attention to it. However, you should not use plastic panels to decorate a barbecue or fireplace, the heat from a live fire deforms the product.
Brick tiles will look appropriate in a bar or nightclub, but it is better not to use it for living rooms. In apartments and houses, they try to create a calm and cozy atmosphere.
Plastic panels in white and other light shades when decorating walls do not carry a negative emotional burden on people in the room. They are suitable for rooms decorated in pastel colors, but will bring some rigor.

There are many ways and options to design a room using facing plates that imitate brickwork.

When planning to change or decorate the interior of a room, start from your financial capabilities, the area of \u200b\u200bthe room, and most importantly, from your desires. The design of an apartment in a “brick” style has been in fashion for quite a long time, and creating a special interior in an apartment using wall plates under the “brick” is quite simple.

SB offers to buy brick-like facade panels in Moscow and with the possibility of sending them to the regions. We supply facing materials from proven manufacturers (FineBer, T-Siding, etc.), which guarantees their compliance with standards, durability (service life can reach 30 years) and a presentable appearance. Facade brick panels can be used in the exterior design of cottages, commercial, administrative and other buildings. SB consultants are ready to help with the choice of materials, provide information support on all issues related to the installation and operation of such a finish.

Main advantages

Brick is a traditional and familiar building material. It is a versatile classic solution that suits any building and blends well with the urban and rural surroundings. Facade panels imitating brick with high accuracy imitate this building material in appearance. However, in terms of technical and operational properties, they differ from it in a number of important advantages, including:

small mass. The use of facade panels allows to reduce the load on the base, which leads to a reduction in the cost of construction;
high insulating performance. Due to the low coefficient of thermal conductivity, cladding panels can be called a heat-saving material. Its use helps to ensure a comfortable microclimate in the house, reduce heating costs;
ease of installation. All types of panels for finishing brick facades are completed with specialized fastening systems (for example, tongue-and-groove). This provides simplicity, accessibility and high speed of installation. You do not have to mix the mortar and perform masonry work, as is the case with traditional bricks;
care practicality. The brick surface can absorb moisture and foreign matter, resulting in stains. Unlike the specified building material, plastic facade panels do not absorb any substances. Their surface is easily washed from dust and dirt with ordinary water;
resistance to external factors. Facade panels are not exposed to UV rays, high humidity. They are not covered with mold and moss, are not damaged by biological pests;
availability. The price of brick facade panels is lower than for similar natural materials. This feature will allow you to save money without compromising the strength and spectacular appearance of the finish;
strength. Like brick, such facing materials for the facade are resistant to mechanical stress. With proper operation, they are not subject to delamination, do not become covered with cracks, do not form chips.

To order brick materials for lining your house, contact SB by contact phone number or through other available communication methods.

Visitors to the OBI hypermarket order goods for home construction and renovation online. Decorative panels made of strong and durable materials are constantly presented in the electronic catalog. More than 200 items of products from trusted manufacturers are available. The cost of goods ranges from 50 to 4500 rubles per unit. All products are provided with long-term warranty, sold wholesale and retail.

When buying decorative panels, you must carefully select products according to the following parameters:

. Manufacturing material.
. Dimensions.
. Hue.
. Invoice.

Plastic products are characterized by a minimum price and maximum resistance to moisture. Elements made of wood, chipboard and MDF are not recommended for use in rooms with a high level of humidity (bathroom, kitchen, bathroom, toilet). Products made of natural and artificial stone are characterized by increased strength and complexity of machining.

PVC panels usually have a solid neutral color. They are often used for wall cladding when performing economy class repairs. Decorative elements made of MDF stand out for their attractive appearance. During installation, they are protected from the damaging effects of moisture by a protective layer of paint or varnish. Mosaic elements are more expensive than other analogues, they are often used in the design of premises.

When placing an order and choosing goods, buyers of the OBI hypermarket use free consultations of trained employees. Additionally, our resource has built-in services. Services and operational work around the clock.

Payment and delivery methods

Purchase goods online with delivery

. You can pay for the order in cash or by bank transfer.
. You will coordinate the date and time of delivery with the operator by phone when confirming the order.
. The terms of the free service depend on the city, amount and weight of the product.
. Unloading goods, lifting and transferring are additional services and may be paid separately, check with the store operator.

Detailed information about the intervals and zones by city, the conditions for unloading and lifting the order are located, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.

Order and collect yourself where it is convenient for you

. When filling out the order form, indicate a convenient date and time for you to visit the hypermarket.
. You can pay for the purchase in cash or by bank transfer at the cash desks of the store.

Purchased goods can be picked up at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

A bare brick wall in the interior looks stylish, but the laying is far from always done neatly, and therefore the surface requires additional finishing. The internal cladding of building envelopes with decorative bricks takes a lot of time, a considerable space of a room, hall or hallway, and also has a considerable weight. It is for these reasons that brick panels of various textures and colors are used for interior decoration, which is simpler and cheaper. In the same way, concrete walls and gypsum partitions of entertainment facilities, residential and office premises are finished, giving them respectability or brutality, based on the situation and design intent.

Varieties of panels

Depending on the material of manufacture, the panels, which differ in their characteristic brick texture, are divided into several types. The most popular among them are:

PVC - made from polyvinyl chloride with the addition of special softeners;
MDF - are distinguished by the best properties and the presence of natural wood chips as the main ingredient.

"Brick" panels have different specifications, appearance, manufacturing technology and color. But their external similarity with a brick and a rectangular shape remain unchanged. The area of the plates can be from 3 to 8m2. Both materials are easy to cut, which is convenient when joining corner surfaces. For cutting, use an electric jigsaw or a hacksaw for metal. Thin PVC plates are cut with scissors or a clerical knife.

Panels that imitate brickwork are perfectly combined with almost any finishing materials, which include wallpaper, ordinary or decorative plaster, wood, various types of paints, metal. They can be combined within the same wall or on mating surfaces, which allows you to create unique interiors.

Brick-like decorative panels for interior decoration successfully hide irregularities on the walls, and with a frame mounting option, they help to hide engineering communications behind the cladding and create shallow decorative niches. Designers use cladding to create all sorts of decorative elements, from podium cladding with two-level floors to visual imitation of columns and “torn” surfaces. Often the panels are placed on the ceiling, which looks quite unusual.

There are a lot of options for using "brick" cladding, so creating an exclusive interior will be interesting and not at all difficult.

Advantages of decorative brick panels

The advantages of facing material include:

simple installation, which even a novice home master can handle;
undemanding to additional coloring, as it is already a finish;
the uselessness of preparing a perfectly flat base;
versatility, allowing the use of PVC and MDF for external and internal cladding of walls and ceilings, door and window slopes;
the possibility of replacing individual panels in case of significant defects, without destroying the main area of the skin;
providing additional heat and noise insulation.

PVC panels

Wall decoration with materials based on polyvinyl chloride is performed in residential buildings, public buildings and utility buildings. The panels are not afraid of moisture, so their use is allowed in bathrooms, kitchens, terraces and balconies. When choosing a material, you should pay attention to the fact that PVC under a brick:

naturally imitates the texture of the stone;
provides the possibility of combining unusual colors;
has a relatively low cost;
lasts a long time and does not require special care;
not afraid of ultraviolet;
copes with temperature changes;
has flexibility, elasticity and low weight;
hardly ignites, although it begins to deform quite quickly at high temperatures.

PVC cladding panels are available in the form of sheets, strips or plates. The front surface may resemble artificial brick or natural stone. A realistic three-dimensional shape of the masonry is created using special molds. During the manufacturing process, permanent paints are applied to the surface in a certain way or a film with a pattern is glued to create a visual three-dimensionality. In the latter case, the material is called laminated.

PVC panels are most often mounted directly on the walls with glue. Small irregularities do not become an obstacle in carrying out work, since the flexibility of the material allows minor deviations when facing surfaces. A slight curvature, in fact, can give the enclosing structures a special effect of naturalness, which is widely used by designers.

If there are significant defects on the walls that need to be hidden, brick-like PVC panels can be installed using frame technology. But in this case, either preliminary sheathing of the frame with plywood will be required, or a reduction in the pitch of the crate in order to provide additional protection for the cladding. The fact is that plastic panels are not strong enough to withstand a strong impact, so they require a more reliable underlay.

It is fair to say that concrete surfaces cannot always save PVC sheathing from deformations in the form of characteristic dents due to the convex profile of the panels, so any mechanical impact on the decorative material should be avoided.

PVC panels are made in one or two layers (with expanded polystyrene on the back side).

MDF panels

The material is obtained by pressing wood chips in a dry way at high pressure. The binding element here are modified resins with the presence of a small amount of formaldehyde. This fact suggests that MDF does not have a negative impact on human health, which is important when choosing a material for interior decoration.

MDF panels gained great popularity when facing facades, arbors, balconies and outdoor terraces, but they are also used in interior work. The moisture resistance of the decorative material makes it possible to use it in rooms associated with high humidity - in the bathroom and kitchen. In the hallway and public corridors, care should be taken to ensure that the panels cannot be scratched by children or pets, since the surfaces of facing MDF are rarely treated with anti-vandal coatings, only in special cases.

Brick-like panels will harmoniously look in home and industrial offices, they are combined with most building materials. Installation of elements is carried out, as a rule, in a frame way. The process takes a short time period, and the work is done with a minimum amount of dust and dirt.

The advantages of MDF panels include:

strength, allowing the fixation of sheets on a rarely located crate;
the admissibility of hanging shelves and cabinets;
environmental friendliness;
hygiene;
acceptable cost.

Other brick panels

For interior decoration, manufacturers produce "brick" panels made of fiberboard, plywood, hardboard, gypsum, fiberglass and HDF. Each of the materials has certain limitations in its use. Some have insufficient moisture resistance or an unnatural imitation of the texture of a brick, others have a high price or low strength, and still others have a lot of weight or certain inconveniences during installation. In this regard, the above materials are less in demand compared to PVC or MDF.

Options for "brick" finishes

Bare brick is characteristic of rural and some classical styles, which include:

country;
Gothic;
English;
Romanesque;
loft, etc.

Today it is not at all necessary to leave the erected walls without finishing, which plays not only a decorative role, but also a functional one - in the form of additional heat and sound insulation. More recently, the market could offer brickwork stylization only on wallpaper, but their flat surface could not give the required realism. Modern manufacturers have significantly expanded the range of facing materials that imitate the texture and texture of natural materials and bricks, and designers have thought about how to use decorative panels in the interior in the best possible way.

Here are some tips from the experts.

The option of brick finishing all walls in one room is suitable for a house that has several lounges. The interior will remind you of the old masonry of a castle or a tavern, but it will be difficult to stay here all the time due to emotional pressure and the lack of a certain comfort that a modern resident of a metropolis is accustomed to.
Brick-like paneling of one wall or partition will not overload the interior and is quite suitable for a one-room apartment, but the color should be chosen in soft shades, without the presence of aggressive tones.
For part of the wall, it is allowed to use a bright brick color. He can add an interesting accent to the room or highlight a certain area, but you should not use panels for finishing the fireplace, as an open fire can deform the material.
The red color of the brick is suitable for a restaurant or a club. It is rarely used in living rooms due to considerations of creating a calm emotional atmosphere in the house.
White and light gray shades of brick will not fetter or “press” on those present. Such panels will harmoniously fit into the interiors of pastel colors, even in the bedroom, but they will create a certain “chill”, which should be taken into account when decorating rooms.

There are a lot of options for finishing the interior space using decorative "brick" panels. They depend on the area of the room, its lighting, the desires of the owner and his financial capabilities. But do not forget that for some style decisions, facing with such material will be inappropriate.