Welding table with your own hands: photos, drawings. How to make a metal table with your own hands? How to cook the table from the corner

The construction of such a design as a welding table with their own hands, - correct solution. Thanks to this, you will receive a place to work and practice. It should be noted that for the manufacture of the device it is better to take a metal. The tree is not suitable, as it is easily flammable.

Where to put a welding table with your own hands? In the garage it is most often put. has many advantages. For example, it can be grounded to it, which provides the Security Wizard.

Welding table features

Welding table with your own hands has a unified design. He is:

a plane for work in which clamps for working blanks are present;
ground circuit.

What tools and fixtures will be needed?

Many are interested in how to make a welding table with their own hands. This article will describe the technole process. An important point is the preparation required tools and fixtures.

You will need:

with all components ( electrical cables, clamps, electrodes, etc.);
passatia;
roulette;
line;
a hammer;
three clamps of the C-shaped form;
hacksaw for working with metal for propyl under the desired angle (preferably the use of electric grinder);
ore ordinary
corollary for joinery;
nippers;
tap for creating thread M8;
machine for milling or turning works (it will be needed for removing the champers with the parts).

You can make a welding table with your own hands in different ways. There are two models of the product.

First option

Welding table with your own hands, the photo of which is presented below, has dimensions of 1100x660x900 mm. So that the design is not turned out too expensive and heavy, it is performed from thick plywood sheet. In the future, it is covered with a metal plate.

What materials will be required?

You will be needed:

profile pipe 40x20x2 mm - 9.9 m;
steel strip measuring 40x4 mm - 2.0 m;
four M8X40 bolts and four M8-6 nuts for fastening;
one sheet of steel 1100x650x2 mm;
one sheet of plywood 1220x1220x10 mm.

All materials must be without corrosion. If there is a rust, then the surface should be bulk. In order to make a welding table with your own hands, the drawings are required.

Billets

From 40x20x2 mm blanks are cut:

for frames of legs and jumpers - two parts of 1.1 m, two parts of 0.66 m, four blanks of 0.9 m, one part 0.58 m;
two blanks for foot jumpers of 0.58 m;
one detail for a long foot jumper 1.02 m.

The chamfer is removed by a milling or lathe.

Welding frame for table top

The components of the frame necessary for welding are arranged and fixed by C-shaped clamps.
The frame is a rectangle with the presence of jumpers. To check the assembly, we advise you to measure two rectangle diagonals. The permissible error is not more than 1 mm.
Billets are connected under the frame. First of all, the rectangle is welded, and then the jumper. First, the sticking seam is used, after that - solid.
Produced protective treatment Bulgarian.

How to make a worktop finish?

The angles of the frame are enhanced by overlays. In order to fasten the legs and other attached parts, a stride of 40x4 mm is used. Sheat are removed. Ready parts are welded at the bottom of the corners.
To fasten the legs, you need to weld the lining of the strip. In the legs need to drill hole drill D<6 мм, затем по ним сделать аналогичные отверстия D=6,7 мм в раме и нарезать резьбу М8. Их следует прикрепить, затем приварить боковые перекладины.
From the plywood sheet it is necessary to cut the table top. It is covered with a sheet of steel. When needed, the layers are attached.
All we advise you to treat rusting makeup.
Such a design, like a homemade welding table with your own hands, can be attached to a modern look. This is achieved thanks to the trained wheels. So the device will be easier to move. The wheels need to be equipped with locking devices. On the table you need to install additional details for fixing workers' blanks. To the top corner you can weld the holder for the welding torch. It can be made from the pipe of the desired diameter.

This design is quite large. It is suitable for welding large products.

Second option

Welding table with your own hands can be made differently. The second model has a size of 445x750x915 mm. This design is distinguished by compactness.

Need material

Two plates 445x750x3 mm.
Four coolers 25x25x3 mm 76 cm long (their angle should be 45 degrees).
Four corners 32x32x3 mm 91.5 cm long.
One tube d \u003d 3 cm, the length of which is 7.5 cm.
Four supports for wheels on a thread.
Four nuts for support.
Four nuts for connecting.
Four locking washers.

Stages of work

Stopper frames and second shelves are welded. Two identical rectangles of 76 and 46 cm are harvested.
Dimensions are inspected. A permissible error is 1 mm.
Claiming seam welded parts for frame.
The correctness of the geometry is checked.
After that, all the details are welded by the main seam.
The countertop and the second shelf weld. Initially, the compound is made by sticking seam, and then solid.
Legs are welded to the frame. Their fixation is made by means of clamps. They are attached at an angle of 90 degrees. The joints are welded with a point seam.
The legs to the second shelf, located at a distance of 70 cm from the tabletop are attached in a similar way. After checking the geometric correctness, solid seams are performed.
Mounted supports of wheels.
A welding burner retainer is installed in the corner. A pipe d \u003d 3 cm is used. The length of which is 7.5 cm.

What precautions exist?

Everyone knows that welding work carries a certain risk. To protect yourself from all troubles, a number of important recommendations should be observed:

It is necessary to ensure full-fledged ventilation. It is advised to install ventilation with an exhaust.
It should be protected from shocking current. To this end, work should be carried out only in rubber gloves and ensure that they are not wet.
Eyes need to be protected from arc glow. To this end, we advise you to apply helmets and glasses.
Splashes from metal should not fall on the desktop. Before conducting welding, you need to clean the place of work from the garbage. Particularly dangerous particles susceptible to light ignition. If the work is carried out in the garage, there should be no container near the paint, tanks with flammable.

There are also special means to protect, without which the work is not recommended.

Make furniture with your own hands for the cottage or garden is not only from natural materials, but also from metal. Support parts of chairs, tables or benches are easy to perform from the profile pipe of the square section. This is a quite affordable material that is easy to purchase in business stores or in building markets. A new birth in the skilled hands of the master often acquire and served their metallic tubular elements from duralumin clams, baby strollers or even old tap pipes.

Basic work techniques

Metal furniture with their own hands easy to assemble, applying bending tubular elements or connecting them straight segments. To obtain a smooth bending of the tube without damage, it is worth making the simplest bending tool from a car brake disc. The general view is shown in Fig. 1. The bending of the pipe occurs in the following order:

the end of the tube plug through the plug, fill the pipe with small river sand, plug the other end;
place the pipe into the bending device, clamping it between the pin and the protrusion on the disk;
applying physical effort, bend pipe to the desired angle.

Figure 1. Pipe bending: 1- brake disc; 2 - pipe or bar; 3 - stop from the steel rod.

It is possible to alleviate the bending of the steel tube using a soldering lamp, heating the bending place to red.

In order for the same details to be identical, it will also be necessary for such a tool as plas. This is a sheet of cardboard or plywood with a contour of furniture details. A complainent detail in the processing process should be checked on the plaza for compliance with contours. If there are several parts, then their coincidence of each other will have to check.

It is possible to fasten the metal parts with the help of welding and threaded connection. In some cases, wooden sleeves are used for fasteners, in which self-tapping screws or screws can be screwed. It should be remembered that pipes from duralumin welding are not subject to and connecting them only with the help of screws and bolts.

After welding, the welds should be treated with a file or grinding machine until a smooth surface of the joint is reached. Before the final finish of the furniture frame of metal, it will be necessary to clean from rust and polish.

Back to the category

Making the simplest carcass

Before work, you need to prepare such materials and tools:

pipe profile 20x40;
welding machine, electrodes (№3);
bulgarian;
fire, sandpaper, drill with nozzle or grinder;
measuring instrument: meter, square.

The size of the bench is selected, based on personal preferences. According to the standards, the pipe is cut: 4 parts will be required for frame, 1 - for transverse communication and 4 identical segments for the legs. Details of the frame pair, 2 of them should be a length equal to the width of the bench, and the 2 - its desired length. The length of the legs is determined by the height of the bench.

Surfaces where welding will be made, to clean the file to fresh metal. Dismix the parts of the frame on a flat surface as they will be cooked, and to compound, constantly checking the correspondence of the angles of 90 0 by the coal.
Mix the middle of the long sides of the frame and breed a pipe segment intended for transverse communication.
In the inner corners of the frame to spend the legs so that they were strictly perpendicular to the frame plane.

The bench seat can be made of boards, thick plywood or MDF. If you wish to have a product that is fully made of metal, the desired number of identical pieces of the pipe or strip steel is cut for the seating and weld or screw the bolts on the frame.

Sample frame for a bench can be made and a frame for a table, a stool or chair.

This will require only to change its dimensions and provide additional details (back, prodes, etc.) or decor.

Back to the category

Bent metal furniture

Frame from pipes, bent under right angles in 2 planes: a - wooden frame; b - metal corner for fasteners; B - curved carcass pipe.

The frame of pipes bent under direct angles in 2 planes is shown in Fig. 2. It will take to work:

pipe duralum or steel with a diameter of 22 mm;
bending device;
bulgarian or hacksaw for metal;
wooden bushings, selflessness or studs;
measuring tool.

From the pipe sufficient length, the frame is wounded entirely in the sketch and standards, which has the configuration of it on the plaza. In the event that there are only short cuts of pipes, fuse individual parts that are connected to a solid design. To do this, the shocking ends drive the sleeve, to fit it so that it enters into the pipe is tight. Then drill holes for the self-tapping screw at a distance of 1 cm from the cut and fix the parts by screwing the fastener into the sleeve through the hole. The frame for seating is collected from wooden bars and is attached to the frame using the corners on the self-tapping screw.

As in the previous case, changing the sizes of the frame, it can be used for the manufacture of a table or tool.

For its manufacture, it will take P-shaped bend item for the back and rear legs. The front legs, the base of the seating and the back make up another part of the structure, bent in 2 planes. When using short pipe segments, their compound is performed as described above: with the help of wooden sleeves. The connection of the front and rear parts of the chair is performed by welding or threaded. Soft seating and back are made of plywood, covered with foam rubber and furniture cloth. The fasteners of them are made to the frame using a corner on self-drawing.

With an increase in the length of the frame and soft parts, it is possible to make a soft sofa for a garden or an apartment on the basis of this design.

When acquiring skills to work with metal parts of furniture, a homemade master can collect more complex structures from a large number of curved elements. Metal furniture After the color will acquire similarity with wrought or wooden bent furniture, and the chair or the table collected from chaotic twisted pipes can be competed with the structures in which natural materials are used.

During the welding of small parts, problems arise with their fixation. Subsequently, they will affect the quality of the seam, the reliability of the connection. Special tables make special tables, the design of which is designed to increase the convenience of the welder. It is important to choose the correct drawing and make an assembly scheme.

Drawings of table

The problem of independent manufacture of the table for welding works is minimal information about similar structures. Factory models cannot serve as a basis for drawing up drawing, as complex, many functions are not applicable in a home workshop. Alternative to take the simplest drawing and improve it.

do not install wheels, as they affect sustainability;
on the working welding surface, make the longitudinal slots (30 mm) for fixing clamps;
under them to establish an inclined plate to protect the tool from sparks and scale;
installation of lifting sidewalls to increase the working surface of the table.

As a result, a similar device for welding work should be obtained:

Materials and components

For the manufacture, you can use any rebound metal - corners, pipes of the profile cross section, sheet material. It is important that the welder's table is stable, withstanding not only the weight of the workpiece, but also the possible increase in pressure on the surface during operation.

Tips for choosing materials:

Support racks (legs). Made from the profile pipe or corner, the first option is preferable, since the mechanical strength increases. Thickness - from 1.5 mm and more;
Work welding surface. Steel plate with slots for clamps, thickness - from 2 mm. The edges are rounded to make a flat surface.
Additional structures to increase the working area of \u200b\u200ba table of square or round section.
The protective screen is made of leaf iron, preferably - with sides.
Bottom shelf - from DVP or chipboard. For better protection, you can put a thin steel sheet.
Rube ribs - corners or pipes.

Additionally, primer and paint will be required. The desktop is better to process - this service life will increase.

Order assembly

To perform work, a welding machine, electrodes, "Bulgarian" with metal discs, measuring instrument, fastening bolts are required. Pre-drawing a drawing of the structure is calculated, the size of the blanks is calculated. In the latter case, you need to take into account the thickness of the welding seam.

Assembly Instructions:

Formation of blanks, checking their size according to the drawing.
Build the frame, welding of support racks, fastening rigid ribs.
In the dimensions of the finished carcass make the worktop. After measurements, it is not fixed.
Installation of the protective screen. The angle of inclination is up to 45 °, additionally make a chute for renovation of welding waste.
Installation of the main working surface.
Production of sidewalls, they are attached to the design on the hinges. Movable stops of small diameter pipes.
Primer and painting.
Installing a sheet of fiberboard or chipboard.

Additionally, you can install hooks, drawers or boxes for storing and fixing the tool on the welder's table. The choice depends on the requirements for functionality and ease of operation.

What else is needed for configuration

To create the most comfortable working conditions, you will need to buy additional tools for the welder. Their function is a reliable fixation of the workpiece, the possibility of operational change change. Requirements - resistance to temperature drop, mechanical strength.

Set of additional tools:

Clamps. Are necessary for fixing the workpiece on the surface for accurate welding;
Clamps. Perform the tighter function, but more specialized - the installation is needed by the angle of honey with the welded parts, a complex connection.
Magnetic base. Recommended for the processing of small parts of parts, the fixation of which is difficult to the mechanical method.

In the latter case, you need to take into account the mass of the auxiliary magnetic tool and the maximum allowable weight of the part.

The video material presents a detailed overview of the optimal model of the Welder table:

In the home welding workshop, sometimes it is easy to do not do without such a desired device like a welding table. This design made of metal significantly facilitates the process of welding various nodes, parts and structures. In addition to the carrier function, the welder can act as a grounding circuit to which the clamp and the ground cable can be attached. The welder desk can be used in specialized stores, and do it yourself, saving a certain amount of money. Self-installation will be wonderful practice and will benefit beginner welding experts.

The welding table is better made with your own hands, as it will benefit from novice welding experts.

The main functions of the welding table

The welder's table is a fairly simple design that performs the following main functions:

plane for work, equipped with various elements for fixing workers' blanks (lattices, ladders, welding burner holders, etc.);
ground contour.

Tools and appliances for creating a welder desk

The following tools and materials are needed to create a Welder table:

welding machine, as well as electrodes, cylon with inert gas, etc.;
ore ordinary
carbon joiner;
roulette construction;
nippers;
c-shaped clamps - 4 pcs.;
saw on metal (Bulgarian);
tap for cutting the M8 thread;
drill or perforator;
equipment for removing the champers on the billets (milling or lathe).

Safety Requirements for Welding Production

Welding work belongs to the work of increased danger, so when they are proceeding, the following basic requirements of labor protection and safety requirements are necessary:

Welding work should be carried out in a well-ventilated room or room with supply-exhaust ventilation.
When working, you need to use personal protective equipment: welding shield or mask, leather gloves for welding, overalls, footwear.
Before starting work, it is required to check the health of welding equipment, grounding and personal protective equipment.
The workplace of the welder must be freed from flammable materials and not having a clutter.

Welder table assembly algorithm

Option 1. Welding table drawing.

As an example, consider two options for creating a welder's desk with your own hands.

Welder table 1100x660x900 mm. As facilitating and cheapening the construction, the tabletop is made of a sheet of thick plywood, which is subsequently covered with a metal plate.

Materials for assembly:

profile pipe 40x20x2 mm - 9.9 m;
band 40x4 mm - 2.0 m;
fasteners: M8X40 bolts - 4 pcs. Nuts M8-6 - 4 pcs;
steel sheet 1100x650x2 mm - 1 pc.;
plywood 1220x1220x10 mm - 1 sheet.

Cut from the profile pipe 40x20x2 mm blanks for frame, legs and jumpers of the table (2 blanks of 1.1 m, 2 billets of 0.66 m, 4 blanks of 0.9 m, 1 billet for frame jumper - 0.58 m, 2 Billets for jumpers on the table legs of 0.58 m, 1 blank for the long jumper of the table legs - 1.02 m).

Remove the chamfer on the welded parts on the milling or lathe.

Cook the frame under the tabletop:

The workpieces of the profile pipe, designed to weld the frame for the table top, have and fix the C-shaped clamps on a large smooth table.
The frame under the table top is a rectangle with a jumper, so for the correct assembly and further operation of the design, we check the matching of two diagonals of the rectangle. Permissible deviation ± 1 mm.
We weld the blanks under the frame (first of all, the rectangle itself is visible, and then the jumper) at the beginning of the sweeping seam, check the geometric correctness of the connection, after we welcome all the joints with the main seam.
We clean the seams with a grinder.

Enhance the corners of the frame of the table top with lining from the strip 40x4 mm for fastening legs and other attached elements. For this:

remove the chamfers on the prepared lining;
we weld the prepared lining from the bottom of the frame in the corners of the set of the table of the table.

To fasten the legs, we weld the lining from the strip 40x4 mm (with previously removed chamfering) to the upper edge of the legs, we make a drill or perforator of the hole for the feet of the legs:

drill holes D.<6 мм в ножках, затем по ним размечаем и сверлим отверстия в раме;
drill holes to d \u003d 6.7 mm and cut the thread M8.

Attach the feet of the table to the frame and weld the side crossbars between the legs.

Cut from the plywood sheet, we install it on the frame and cover it with a steel sheet. If necessary, fix the table top layers to the frame.

We proceed all seams with anti-corrosion compositions.

In the future, it will be possible to upgrade this table by attaching to the legs of the wheels for movement, having locking devices, and install additional items for fixing workers: lades, lattices, etc. You can weld to one of the top corners of the table top holder for the welding torch, made from the part of the pipe of the corresponding diameter. This option is spacious enough, solid and suitable for working with massive structures.

Welder table 445x750x915 mm. This table has compact sizes, as well as wheel supports (with locking devices) on the legs.

Option 2. Drawing of the welding table.

Materials for assembly:

plate Metal 445x750x3 mm - 2 pcs.;
corner 25x25x3 mm (46 cm long) cut under 45 ° - 4 pcs.;
corner 25x25x3 mm (76 cm long) cut under 45 ° - 4 pcs.;
corner 32x32x3 mm (91.5 cm long) - 4 pcs.;
pipe d \u003d 3 cm (7.5 cm long) - 1 pc.;
wheel Rubber Supports - 4 pcs.;
wheelpit nuts - 4 pcs.;
connecting nuts - 4 pcs.;
washings of locks - 4 pcs.

All materials should not have traces of rust. In the presence of traces of corrosion, they must be carefully cleaned.

Weld up frames for table top and second shelf. We make two equal rectangles with sides of 76 cm and 46 cm. Check the matching of the size of two diagonals of rectangles. Permissible deviation ± 1 mm.

Welding frame blanks first by sweating seam, check the geometric correction of the connection, after we welcome all the joints with the main seam.

We clean the seams with a grinder. We weld the tabletop and the second shelf to the frames, we perform the welding first, and then the main seam.

We weld the feet of the table to the frame with the worktop. With the help of clamps, you fix the legs attached at an angle of 90 ° to the frame with a tabletop, weganong the joints of the junction of the seam.

Similarly, fix and weld the legs to the second shelf located at the selected distance from the table (usually 0.7 m). After checking the rectangles of the compounds, we perform all seams by the main welding seam. Mount the wheeled supports.

We weld the holder for the welding torch (pipe d \u003d 3 cm with a length of 7.5 cm) to the selected corner of the table top.

We proceed all seams with anti-corrosion compositions. The second version of the Welder table is ready.

It is distinguished by mobility and takes little space, suitable for work in a small workshop.

In order for the welding seam to be careful and durable, the work was convenient and safe, the welder is needed well equipped with a workplace. Work on random supports or on the floor does not make it possible to conveniently arrange the welds, they did, securely fix them. For this purpose, such equipment as a welding table is designed. It can be purchased ready, but you can make it yourself.

Welding table requirements

Before starting to design and make a welding table, it is necessary to determine the requirements for it:

Stiffness design. He should not "walk" under the weight of massive or bulky welded structures.
Reliability of fixing blanks.
Convenience of the welder.
Shelves for welding equipment, welding materials.
Box for rarely used tools.

In addition to basic requirements, you can provide additional options:

exhaust ventilation to remove welding gases;
lighting the working area - 36 volts or LED.

In addition, it is important that combustible materials do not apply.

Welding table drawings

You can make a welder desk for industrial drawings. However, they, as a rule, are overloaded with technological and production information, irrelevant to the home master. A sketch drawing can be done independently, the main thing is to accurately calculate and designate both the overall dimensions and the size of each workpiece.

When designing the welding table, its height dome down slightly below 80 cm - then the welder will be in the most convenient position for work.

Required tools and materials

In the domestic workshop often strive to do with infirred materials. However, in order to meet the requirements of strength and stability formulated above, it should be used for racks:

profile cross section of at least 60 × 60mm and wall thickness 4 mm;
a 2-hour or 60 × 60 corner, but already thick with 4 mm.

The shelf and boxes can be performed from the easier profile.

The countertop is gaining from profile rental. The gaps between them will be used to fix the parts of the clamps or ticks weldable.

For a protective screen apply:

frame frame - light profile;
the screen itself is a metal sheet 0.4-1.0 mm.

The protective screen also make side sides.

The welding table with the fastening system should be equipped with additional devices that helps to fix the blanks to the table and to each other:

clamps;
clamps;
magnetic plate base for fastening small parts.

This snap on the table for welding with your own hands will not be done, it will have to buy.

Design table for welding

There are several types of designs. Most common:

amateur, for episodic welding works, small designs with a homemade master;
semi-professional assembly and welding, to perform complex operations

For the table from the profile pipe made by their own hands, the following dimensions are recommended:

the height of the working surface from the floor is 70-85 cm;
dimensions of the working surface at least 80 × 100 cm;
the height of the protective box is at least 140 cm from the floor.

Simple table for welding

This design is durable, easy to manufacture, is convenient to use with small welding volumes. It consists of a rigidly welded metal frame from the profile of 60 * 60. Four racks are attached to it. 20 cm from the floor they are connected by corners 20 * 20. From above on the frame installed tabletop elements that form a reliable support for combined billets and equipped with grooves for their fastening.

Hooks for wires from the welding machine are welded to the frame, under the working surface put a small pallet for scale and dust.

One of the sides of the table for welding works is installed with a thin metal sheet for storing small tools. Here we weld the stand for a tank with water.

Semi-professional welder table

It is a welding and assembly station designed to increase the ease of welding. Allows not only to cook, but also carry out the concomitant mechanical processing.

On this table are provided:

turning work platforms;
installation of drilling or milling equipment;
quick-release plumbing vice;
swivel consoles for fastening the welding machine;
exhaust ventilation;
flexible illumination of the working area;
anchor mount to the concrete floor.

The goal of all these improvements is to enable the welder to work out of a convenient, not tired posture and save time on the removal operations of the product to the post. Pay upon large volumes of work

Making a welding table

Consider more in more detail the process of producing a simple welding table with your own hands. It is made of rectangular metal products and corners. Dimensions can be changed depending on the needs of a particular home master.

Determine the size of the table

For the free placement of billets, convenience and security when working, select the following dimensions:

floor table top height - 75 cm;
countertop dimensions - 80 × 100 cm;
the height of the protective screen is 140 cm from the floor.

Billet and cutting material

For the manufacture of the design you will need:

corner 25 × 25, Length 46 cm, Ends are cut under 45 ° - 4 pcs.;
corner 25 × 225, length 76 cm, ends cut under 45 ° - 4 pcs.;
profile 30 × 230 × 21,5, Length 76 cm - 4 pcs. (for legs);
steel sheet 3 mm 44.5 × 75 cm - 2 pcs. (for shelves);
profile 60 × 240 × 22 mm - length 100 cm - 2 pcs.;
profile 60 × 240 × 22 mm - length 72 cm - 2 pcs.;
profile 40 × 230 × 21.5 Length 72 cm - 8 pcs. ;
swivel wheel support with a stopper - 2 pcs.;
wheel support - 2 pcs.

Rental is cut by a grinder or cutting saw, carefully inspired from burrs.

Making countertops

By contour, the table top is made from the profile of 60 × 240. When assembling should be followed by the equality of the angles and diagonals of the contour.

The inner grill is recruited from the segments of the profile of 30 × 230 and is welded to the contour at equal distances from each other. All welded seams should be carefully cleaned the corner grinding.

From the side of the short sides to the bottom of the table, you can breed the handles from the rod 8-12 mm. This will rearrange the table from place to place.

The legs are welded at the corners of the tabletop frame. First, it follows the point welding to grab legs and especially carefully check the corners of the set of legs with a coal and metal line. They must be strictly perpendicular to the frame plane. If the skew is detected - it should be fixed. Otherwise, the table will be unstable. From the bottom of the legs you can weld the fastenings of the wheels. It is convenient if the table is often planned to move from place to place. If the place is permanent, it is better to abandon the additions of the wheels and to prigerate small metal squares to increase the stability and protection of the floor from damage.

After aligning the legs, they need to be prevailing constantly and copper with an additional strapping from light corners of 20 cm from the ends. They are welded with a flat side down, and in the resulting recess lay the shelf from OSB. It places welding equipment and materials, mask, etc.

You can also welcome several brackets and hooks for hanging cables, holder and other snapshot. They are made from the steel bar of large nails. You should carefully clean them to remove sharp edges.

Protective box

The protective box is used to prevent spray splashing of the molten metal during welding and solid waste during stripping. The frame is made of a light corner, and the box itself is made of thin metal. It is attached to the tabletop on the pins. When driving with parts, protruding the dimensions of the table, the box is removed.

Under the tabletop, you can breed a tray with low sideboards for the collection of scale at stripping seams. The tray is installed with some inclination so that the garbage is gradually assembled to its lower edge.

Tools are stored in a wooden or metal box. Instead, you can cook the cabinet with the shelves.

Assembly

For assembly work, you will need:

welding machine;
electrodes;
bulgarian with cutting disc and disk for stripping;
set of manual plumbing tools;
rule 1 m, corner, roulette.

The assembly is carried out in the following order:

cutting blanks, checking sizes and angles by sketching drawing;
assembling table tops: First, the contour, then the ribs;
attaching legs;
welding bottom strapping;
fastening wheels or reference sites;
assembly protective box;
mounting tray;
final stripping of seams, burrs and irregularities;
applying soil and paint;
installing OSB sheet.

Additionally, you can welcome the handles for moving and hooks for wires.

Precautions when working at the welding table

Welding has several harmful factors that may damage human health:

heat;
screen of hot splashes;
ultraviolet radiation of high intensity;
electric shock;
fall of heavy items.

To avoid harmful effects, the following rules should be followed:

Works should be carried out in well ventilated rooms equipped with both aircraft and exhaust forced ventilation.
Before starting work, carefully inspect the equipment for the absence of mechanical damage, insulation disorders, weakened contacts.
During operation, be sure to use personal protective equipment: welder mask, respirator, spilch protective gloves with crags, refractory clothing and shoes.
It is impossible to clutter the workplace. There should be easy and convenient access of the welder to the working area.
It is strictly forbidden to work with random supports.
Welded parts must be fixed by inventory fixtures.
It is strictly forbidden to apply and store flammable materials and liquids closer than 5 meters from the welding location.

Carefully execute these rules will allow to preserve health, life and material values.