DIY box: a master class on how to quickly and easily make a wooden box. How to make a wooden box with your own hands How to assemble a wooden box

Who would have thought that wooden pallets are such valuable material! From these boxes you can make a lot of useful things that will be useful to us in Everyday life. Our editors will tell you how to make strawberry growing box. To implement this idea, you only need one pallet.

Before remodeling an old pallet, inspect its markings. It turns out that some wooden pallets cannot be used for gardening purposes. If the stamp contains the letters MB, this means that the pallet has been treated with insecticides. The letters HT mean heat treatment; such pallets can be safely used for growing plants.

How to make a box with your own hands

You can leave the box in its original form, or you can varnish it. It all depends on your preferences! I dream of placing a similar box in the country house, painting it in a bright color.

Detailed master class on creating boxes from a pallet watch in this video.

If you liked this idea as much as I do, surprise your friends and share!

The main advantage of a flower box made of wood is the variability of solutions: you can make it yourself from leftover building materials, and the dimensions and shape will be determined only by specific needs. Such compositions are extremely cheap, and with a skillful approach they are in no way inferior to others. decorative elements landscape design.

The key advantage of the solution is considered to be extremely low cost; we are also pleased with the possibility of creating a unique composition that fully matches the interior or landscape design. The special structure of the wood helps to maintain optimal microclimate for plants, with a skillful approach can be used natural beauty and fibrous material.

All the disadvantages of such boxes are due to the wood’s susceptibility to rotting and biological damage. If you want to plant plants directly in a container, you need to take care to protect the boards from contact with moisture and soil substrate. When used outdoors, wood is relatively short-lived and therefore requires protective impregnation and paint coating.

What materials and tools will be needed for manufacturing?

To make a wooden flower box with your own hands, you need to prepare the following basic tools:

• jigsaw or saw;
• grinding machine;
• forceps;
• tape measure with a square;
• plane;
• screwdriver;
• hammer.

The design of the future box is selected in accordance with the equipment present: if all manipulations have to be performed manually, it is better to give preference to the simplest form. The presence of power tools allows, in turn, to realize any design ideas.

As base materials you can use:

• slats and boards with a thickness of at least 1 cm;
• OSB scraps;
• plywood sheets, including those that can be reused.

Subsequent surface treatment will be carried out using an antiseptic, a variety of paints and varnishes, and stains. Nails, waterproof glue, and self-tapping screws are suitable for connecting parts.

Manufacturing technology for a simple street model

In its most primitive form, the work is performed in the following steps:

1. Boards, the width of which varies between 15-20 cm, are cut into blanks. Three long pieces will be needed to make the bottom and sides, the ends will be decorated with two short ones (here you need to leave allowances equal to the thickness on three sides).
2. The boards are planed with a plane, they can be sanded with coarse sandpaper, the cuts must be carefully processed.
3. Thin holes are made along the edges of the workpieces: in the side parts - 3, in the end parts - 4.
4. Using screws, first fix the sides and bottom, then attach the end blanks.
5. The assembled structure is sanded with fine sandpaper.

All surfaces must be thoroughly impregnated with an antiseptic; varnish, stain or enamel can be applied to the outside.

Used cargo pallets are often used as a base material; this is a very cheap raw material that is easy to process. Instructions for assembling an outdoor flower box:

• the pallet must be disassembled using a nail puller; pliers will be needed to remove fasteners;
• Rotten and damaged boards are rejected;
• a rough sketch of the box is drawn up indicating the planned dimensions;
• in accordance with the notes, the wood is sawn and cleaned using sandpaper;
• assembly begins by fixing the lower base and upper frame;
• The side edges are attached to the two parts of the container with nails;
• the joints are masked with narrow decorative strips.

Here, too, the final stage is the application of protective and paint compositions.

If necessary, you can nail legs made of beams to the container; with their help, complete ventilation of the bottom edge is ensured. Flowers can be placed inside in pots or planted directly in the container. In the second case, it is necessary to cover the box with film and equip it with drainage holes.

Decoration options

Are in great demand miniature boxes for flowers made of wood, in which the vegetation itself serves as decoration: hanging stems and long leaves form a single composition in which greenery predominates.

Craftsmen decorate wood boxes with saw cuts (that is, what is left after work), thin boards in the style of a picket fence, and figured thick cuttings of branches, cleared of bark and coated with varnish.

For those who have the skills of figured wood carving, it will not be difficult to create beautiful flower containers that imitate the shape of tool boxes, baskets, ships, or interior items. There are no restrictions - you can draw inspiration from the surrounding landscape design.

If you plan to use decorative boxes indoors, to create a unified stylistic composition it is worth paying attention to the possibilities of decoupage. Paints, brushes, glue and special napkins will help you easily transform any container and create a designer interior element based on it.

For those who do not like to overload their perception, we can recommend a monochrome design of the tree - for example, paint it in a bleached grey, lilac, blue or light green shade. Such pastel notes look rich, but at the same time restrained.

Products can be floor-standing or hanging. Variations installed on high legs have become widespread: they allow you to care for plants without squatting, which greatly simplifies all manipulations. For assembly wall models will be needed special holders: when choosing them, it is necessary to take into account the potential weight of the structure filled with soil and flowers.

Boxes hung outside the window are in fashion - they are fixed on outside window sill using special strong loop fasteners. Curly products that are polished or stained look especially impressive.

It is more convenient to root several dozen cuttings in a portable container - in the spring the soil in it warms up faster than in a cold greenhouse, and in the fall the seedlings are easily moved to their wintering site. Making a box with your own hands is not difficult: it will take little time, and suitable scraps of lumber can be found in every household.

IN wooden box there should be enough space for normal growth of cuttings for 4–6 months before autumn transplantation or even 1–2 years, if this is required by rooting agricultural technology. Optimal sizes drawer: 300x350x750 mm (height/width/length). In a shallower container, the lid will interfere with the shoots, and an excessively bulky structure will be more difficult to move.
Preparing for work
To build a homemade box you will need the following tools:
– hand saw,
- plane,
- hammer,
– drill,
– wood drills,
– furniture stapler,
- knife,
– roulette,
– square,
- pencil,
– brush.

For suitable for work pine wood without signs of decay:
1. Boards 16–25 mm thick.
2. Bars with a cross section of 30x50 mm.
3. Thin slats 10x30 mm.
When sorting through boards, discard warped and twisted ones - when high humidity they will get even worse.
Consumables:
1. Nails 50x2.5 – 28 pcs.
2. Nails 60x3.0 – 20 pcs.
3. Decorative furniture carnations – 10 pcs.
4. Antiseptic.

The lid of a homemade box can be a piece polyethylene film or white non-woven material measuring 80x60 cm.
Manufacturing of parts
Drawing of the elements of a box for cuttings

Wooden parts: 1 – longitudinal strips for the sides and bottom; 2 – bottom insert; 3 – strips for end walls; 4 – slats; 5 – handles; 6 – connecting bars.
Using a pencil, square and tape measure, mark the pieces according to the drawings, cutting off any cracked or chipped ends.

Cut the boards to size and smooth the surfaces with a planer. Cover the parts with 2-3 layers protective impregnation, following the instructions on the package.
DIY box assembly
Fold two short planks into a shield, draw a line parallel to it at a distance of 30 mm from the cut. Repeat the marking on the opposite side. Place connecting blocks along the lines. Knock down the parts with nails and bend them with reverse side protruding ends.

Take two longitudinal strips and “bait” carnations along the edges. Assemble the blanks in a “P” shape, trim the ends and hammer in nails.

Turn the structure over and secure the side strips on the opposite side. Try to drive the nails vertically to avoid the point coming out of the wood.

Nail the bottom parts, placing a narrow strip in the middle and leaving 2-3 mm gaps between the planks to allow for expansion wooden elements when swelling. Attach the handles with nails near the top of the box.

Drill two rows of drainage holes in the bottom of the box.

Make a makeshift lid for the box. Wrap one strip with film and secure the material with staples.

Wrap the second strip with the opposite edge of polyethylene, place the third strip on the lapel and nail it with small nails.

Attach the canvas to the wall of the box at three points, after drilling guide holes in the slats to prevent splitting of thin wood.

When using polyethylene, use a knife to make slits for water to drain, otherwise in heavy rain the film will bend and crush the shoots.

Place in a homemade box fertile soil and plant the prepared cuttings.

When placing the container on the surface of the soil, place bricks underneath. After selecting the seedlings for the “school”, free the box from the soil, clean the walls and dry the wood.

Making with your own hands various useful household things, such as a plywood box, is not only pleasant, but also very useful. Spending your free time in this way not only promotes relaxation, since at such moments you don’t think about problems, but will also benefit the surrounding household and the interior.

One of the options - simple to implement and not requiring special material costs - is the ability to make boxes with your own hands. Plywood can be used as a fairly durable, reliable and aesthetic material. This material is definitely easy to process, can withstand heavy loads, and has a wide range of thicknesses. Products made from it are suitable for all occasions. Plywood boxes can be used to store small items and tools. There are many more different valuable ideas for their use.

Plywood Processing Tools

With availability quality tools Even an untrained person can make a box out of plywood with their own hands.

• Drill including screwdriver function
• Electric jigsaw. To begin with, you can purchase a device with semi-professional functions. In addition to the tool, a set of files is purchased to perform various functional work.
• Furniture stapler
• Roulette

Material and accessories

Plywood for the bottom. The thickness is selected depending on the purpose of use of the product. It should be thicker than the side walls and lid.

• Plywood sheets for side walls
• Material for the lid, if a lid is intended
• Lid handles
• Planks and blocks of wood - for decoration
• Finishing and finishing nails
• Piano hinges
• Decorative overlays
• Wood glue
• Wheels, if you make the box mobile
• Finishing varnish
• Wood putty

Hello everybody!

Today, a tool box is a very indispensable thing for every owner. Most of us have a lot of different tools that we may not use very often, but nevertheless we keep them, since more than one repair cannot be done without them. To ensure that the tool is in one place and convenient to transport, we use special boxes. Often we simply buy them at the nearest store; the range and variety allows us to do this. But why not make it yourself? The manufacturing process is not too complicated, anyone should be able to do it, especially with something made with their own hands, which is much more pleasant to use than a purchased version. This article will describe 4 different ways manufacturing of boxes, photo report attached.

Let's start making!

Manufacturing method No. 1

We will need:

Material

Plywood;
- pine board;
- nails;
- wood glue.

Tool

- drill;
- hammer;
- chisel;
- manual frezer;
- ruler;
- pencil;
- roulette.

The first thing you need to do is find required material, plywood or cutting boards are suitable for this. Next, according to the presented drawing, you need to make markings, then cut out all the parts of the body. It is necessary to make special grooves in which the partition will be placed; for this we use a hand router or other available tool.

The diagram shows the following body parts:

1 - wall (2 pcs.);
2 - sidewall (2 pcs.);
3 - bottom;
4 - groove along the thickness of the partition and a depth of 1/2–1/3 of the thickness of the material

When everything is ready, all elements of the box body should be sanded. Next, we assemble the body together, fix the parts with wood glue, and then additionally fasten them with small nails.

Now we make a partition for the drawer, cut out a special handle, and use a jigsaw for this.

When the partition is ready, lubricate the grooves with wood glue and install it in its place.

Next, we make overhead handles from the planks and round the corners using a planer. Then we make tool holders from the slats, use a jigsaw and a drill. The holes will serve as screwdrivers, and the square cutouts will accommodate pliers, etc. tool.

So that the box does not get dirty, and there is protection from environment, coat the surface with varnish. As a result of the work done, we get this homemade box.

Manufacturing method No. 2

Box-stool

Material

Plywood or OSB;
- wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tools;
- screwdriver;
- ruler;
- pencil;
- roulette.

We take an existing sheet of plywood, make markings on it, and according to the presented dimensions, cut out the cover (Fig. 1), then the longitudinal drawers (Fig. 2) and the sides (Fig. 3).

Next, we take a wooden beam with a cross-section of 40x50 mm, cut out a handle, and 4 legs with bevels at the ends at an angle of 15°.

Next, we assemble the structure together, using self-tapping screws as fixing elements.

Parts layout:

1 - cover;
2 - drawer;
3 - handle;
4 - leg;
5 - sidewall.

When everything is ready, using sandpaper or grinder round off sharp corners and clean the surface. Next, you can apply a protective coating.

The end result should be such an unusual tool box, which, if necessary, can be transformed into a regular stool, to do this, just turn it over and put it on its legs, with the help of it it will be convenient to reach the place we need, at a time when height does not allow do this.

Manufacturing method No. 3.

Box for a young master.

Does your child love to make things? We suggest making a small box with him where he will store his favorite instrument.

To make a box with your own hands we will need the following

Material

16 mm boards;
- round wooden beam;
- self-tapping screws;
- wood glue.

Tool

Available cutting tools;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

First, we need to take existing boards with a cross-section of 16 mm, then we make markings according to the provided dimensions, after which we cut the wood into the component parts we need.

The drawing shows the following details:

1 - sidewall;
2 - bottom;
3 - handle;
4 - handle stand;
5 - holder.

Using sandpaper, sand the surface and remove sharp corners. When everything is ready, we begin to connect all the parts together, first we need to connect the bottom and sides, then we place along the marked lines vertical racks and at the same time place the horizontal handle.

We fix everything with glue and screws. Then we install special holders for screwdrivers.

Now you can paint, choose the color and coating at your discretion.

The toolbox is ready.

Manufacturing method No. 4

The next version of the tool box is well suited for carrying various equipment that we need, it appearance will be distinguished by solidity and reliability.

To make a box with your own hands we will need the following

Material

The board is no thicker than 12 mm;
- self-tapping screws;
- wood glue;
- pen;
- corners 8 pcs.;
- latch 2 pcs.;
- loop 2 pcs.

Tool

Available cutting tools;
- screwdriver;
- ruler;
- pencil;
- roulette;
- clamps.

To make the box we use wood such as pine, linden or poplar. Most optimal thickness the boards will be 12 mm thick.

Next, we make markings according to the dimensions indicated in the drawings, after which we cut them into component parts, as shown in the photo.

The entire list of required parts.

In order to make sure that the wood was cut correctly, you need to put all the parts in a single box.

First we collect bottom part and the lid of the box, for convenience we use clamps and corner clamps. We fix the parts together with wood glue.

Then, using a drill, we drill a hole for the screws and countersink the holes.