How to make a wooden box with your own hands. Plywood box with their own hands: drawing, tools and features of the manufacturer decorative wooden wooden hand

Hello everybody!

Tool box today is a very indispensable thing for each owner. Most of us have a lot of diverse tools that we may not very often use, but nevertheless, keep it, because without it is not one repair. In order for the tool to be in one place, it was convenient to transport it, we use special boxes. Often, we just buy them in the nearest store, the range and variety allows you to do it. But why not make it yourself? The manufacturing process is not too complicated, anyone should cope, the more thing made by their own hands, much more pleasant to use than the purchased option. This article will describe 4 different methods of making boxes, the photo report is attached.

Let's start making!

Method of manufacture number 1

We need:

Material

Plywood;
- Pine board;
- nails;
- carpentry glue.

Tool

- drill;
- a hammer;
- chisel;
- manual frezer;
- line;
- pencil;
- Roulette.

First of all, you need to find the necessary material, for this plywood or trimming boards is suitable. Next, according to the presented drawing, you need to mark up, then cut down all the parts of the case. It is necessary to make special grooves in which the partition will be put, for this we use a hand milling mill, or another existing tool.

The diagram shows such body parts:

1 - wall (2 pcs.);
2 - sidewall (2 pcs.);
3 - bottom;
4 - groove on the thickness of the partition and a depth of 1/2-1 / 3 of material thickness

When everything is ready, all the elements of the box of the box should be seized. Next, we collect the housing together, fix the details of the joinery glue, and then additionally secure small nails.

Now we make a septum for a box, drink a special handle, for this we use the jigsaw.

When the partition is ready, lubricate the grooves with joinery glue and install it in its place.

Next, out of associates are made of overhead handles, using the plane twigs the corners. Then make the tool holders from the rails, we use the jigsaw, and drill. The holes will serve for screwdrivers, and pliers will be installed in square cuts, etc. tool.

In order for the box not dirty, and there was protection against the environment, cover the surface with varnish. As a result of the work done, we get this homely box.

Method of manufacture No. 2.

Box-stool

Material

Plywood or osp;
- wooden bar;
- self-tapping screw;
- carpentry glue.

Tool

Existing cutting tool;
- screwdriver;
- line;
- pencil;
- Roulette.

We take the available sheet of plywood, we produce markup on it, and according to the sizes presented, cut out the cover (Fig. 1), then the longitudinal distances (Fig. 2) and the sidewalls (Fig. 3).

Next, we take a wooden timber with a cross section of 40x50 mm, cut out the handle, and 4 legs with bevels on the ends at an angle of 15 °.

Next, we collect the design together, we use the screws as fixing elements.

Details location scheme:

1 - cover;
2 - Tsarga;
3 - handle;
4 - leg;
5 - sidewall.

When everything is ready, with the help of sandpaper or grinding machine, we curl sharp corners and we clean the surface. Next, you can apply a protective coating.

In the end, there should be such an unusual tool box, which, if necessary, can transform into an ordinary stool, to do this, it is enough to turn it over and put it on the legs, with the help of it it will be convenient to reach the place you need, at the moment when growth does not allow us This is done.

Method of manufacture No. 3.

Box for a young wizard.

Does your child likes to make? We offer with it to make a small box, where it will store his favorite tool.

For the manufacture of a box with your own hands we need the following

Material

16 mm boards;
- round wooden timber;
- self-tapping screw;
- carpentry glue.

Tool

Existing cutting tool;
- screwdriver;
- line;
- pencil;
- roulette;
- clamps.

First you need to take existing boards with a cross section of 16 mm, then we make a markup, according to the amount provided, after which we produce wood cuts to the components we need.

The following details are presented in the drawing:

1 - sidewall;
2 - bottom;
3 - handle;
4 - handle rack;
5 - holder.

With the help of sandpaper, we grind the surface and remove sharp corners. When everything is ready to connect all the details together, you first need to connect the bottom and sidewalls, then according to the lines, we put the vertical racks and at the same time put a horizontal handle.

Fix all with glue and screws. Then set special screwdriver holders.

Now you can make painting, color and coating are chosen at your discretion.

Toolbox is ready.

Method of manufacture number 4

The following version of the toolbox is well suited for carrying various and necessary equipment for us, its appearance will be different with solidity and reliability.

For the manufacture of a box with your own hands we need the following

Material

The board is not thicker 12 mm;
- self-tapping screw;
- carpentry glue;
- a pen;
- corners 8 pcs.;
- latch 2 pcs.;
- Loop 2 pcs.

Tool

Existing cutting tool;
- screwdriver;
- line;
- pencil;
- roulette;
- clamps.

For the manufacture of the drawer, we use such wood as: pine, linden or poplar. The most optimal thick boards will be a thickness of 12 mm.

Next, we make markup, according to the specified sizes in the drawings, after which we cut into the components, as shown in the photo.

The entire list of necessary parts.

In order to make sure whether the wood is made correctly, you need to fold all the details into a single box.

First we collect the lower part and the lid of the drawer, for convenience we use clamps and corner clamps. Parts between them are fixed with joinery glue.

Then, with the help of a drill, drills a hole for the self-tapping screw, produce centers of holes.

In the process of his life, a person accumulates a lot of small property, which can only be useful for any need. In our close residential spaces, there is often a problem with the location of such things.

To solve this issue, you will need a neat capacity that can be positioned in any corner of your residential space. The most practical and environmentally friendly option, of course, is a wooden box.

With its independent production, you can apply all your fantasy and make a unique masterpiece. The benefit that the tree is the material that allows you to make truly original designs.

Why a tree

For a long time, folk craftsmen were used to make a tree of various designs. From this material they built houses that served their owners for many years, providing them with comfort and comfort.

A tree is a natural material that is well treated and has high ecological indicators. Wooden designs have aesthetic appearance and exuded favorable smells.

Of course, this material has its drawbacks, the main of which are rotting and flammability. But with the right approach to wood processing and caressing for her later, such trouble can be easily avoided.

Any man wants to make some product with their own hands. The tree is exactly the material with which you can experiment and make a thing that will not only with the necessary object of furniture, but will add unusual aesthetics to the interior of the residential premises.

To work with the tree you will need a special tool that a good owner is always at hand. It is necessary to approach thoroughly to choose a material, preferring the most durable wood rocks so that the product lights up as long as possible.

The very first thing to do is determine the place where the wooden box will be located and carefully remove the necessary dimensions.

according to the obtained measurements, cut the design elements of the box - four walls, lid and bottom;
we connect alternately lateral walls using nails or self-tapping screws;
screw the bottom of the product, starting with opposite angles to avoid its offset;
finally, we mount the lid of the drawer, which we provide the possibility of folding with the help of piano loops.

Using simple manipulations, a wooden box is ready for operation. Product reference is made on the basis of your preferences and flavors.

Basic principles
Basic model
Balcony flowers
For seedlings
Ideas for registration
Benefits

Recently, natural materials have been included in fashion. Any products should be easily recycled without harmful nature. In this regard, the beautiful alternative to the plastic will be a tree from which an excellent color box can be built. It will be organically looked at the private site of the private house and on the balcony of high-rise buildings.

Basic principles

Flower boxes can have a different purpose, depending on this design features are solved. The box can be used directly for landing and as a stand for flower pots, made from home.

The first option should be thought out much more carefully. First of all, the material must be treated with moisture protecting with a solution. From constant irrigation, the untreated tree quickly rotates. Do not forget about drainage holes at the bottom.

The second option is much easier by its design, it can be made from simple plates. Such boxes often perform the function of the rapid removal of domestic flowers on fresh air. The pot can be beautifully placed inside and bring flowers to the street. In case of rain, capricious plants are easy to put into the house and do not have to mess with each flower.

The drawer is an excellent alternative to street flower beds. Flowerbed is stationary, and the box can be easily moved and quickly change the atmosphere in the yard. They can cover the hatch, or another unsightly object. In addition, in the flowerbed it is difficult to make the necessary mixture of soil for each plant.

Basic model

Despite its simplicity, the standard box leaves the scope for creativity. Combinations of basic boxes of different sizes will help create an original composition.

To work, you will need:

50 × 100 mm board for the manufacture of bottom;
50 × 200 mm board for lateral walls;
The board is 20 × 90 mm, the facial part will be made of it;
Self-tapping screw or stainless steel nails;
Rabita grid to create a drainage system;
Polyethylene film for additional vehicle protection against moisture.

First you need to develop a design layout in accordance with your requests, and make drawings. It is better to plan the composition in advance so that the drawers with flowers organically fit into space. For example, if they are planned to be placed along the wall, then you need to measure the distance so that you do not have to redo the repellent elements.

In accordance with the drawing, we saw the boards for the manufacture of the box;
Loading the bottom and side boards;
You feed the front and rear walls;
Cut the piece of the mesh of the desired size and the stapler attaching to the bottom;
Film stood at the height of falling asleep, over a drainage chute, we produce several holes for water drain.

It remains only to pour land and plant flowers. This simple design allows you to easily put drawers with flowers on each other and create a multi-level floral garden.

Carefully measure the size of the future design. Flower boxes often do not get close to the wall, or on the contrary, they are put on a mustache, be sure to consider this when drawing up the drawing.

Balcony flowers

Increasingly, passing down the street, you can find balconies and windows decorated with flowers. For outdoor decoration, it is better to use long, but not deep floral boxes. The height should not exceed 20cm. Earth, especially wet, weighs a lot, so similar limitations are needed.

Flower box can be attached with loops, brackets or just put in a wrought base. If room plants are taken for disembarking, it is necessary to envisage the opportunity to remove the design for the winter so that the flowers do not die.

There are several tips that will help minimize the care of the balcony dresser:

Box with flowers on the south side is better to paint in light colors, bright quickly burn out. Preference is given to natural shades. It is good for brown or green. The main rule - the box should not be brighter than the colors themselves;
Pay attention to the stability of the design, poorly installed mounts will not be able to withstand the desired weight;
Drainage holes should not be too close to the wall, otherwise dirty leaps. Holes are better to arrange for a distant wall or provide a small slope;
Flowers are often planted in 2 rows: the first is the curly plants covering the box itself, the second - the flowers of the main composition. Such a location allows you to not pay much attention to the design of the box and led him from simple boards.

For seedlings

In stores now there are a large number of diverse Tar for seedlings, but experienced gardeners know that production does not take into account many important nuances, among them:

Fragility;
Toxic material that often acts as low-quality plastic;
No drainage holes or too large holes,
Uncomfortable size.

All this makes the question of how to make a drawer with their own hands. For this, you will need good boards, adhesive for wood or nails, drill. First of all, you need to calculate the size and make a drawing. Seedlings, as a rule, are grown on the windowsill, under it and need to customize the box. For ease of carrying, it is necessary to immediately provide handles.

From the tree, excellent individual boxes for seedlings are obtained, they are necessary so that the plants will not be rejected by roots. Given that only young seedlings will grow, the height of the box should not exceed 10 cm.

Collect the main box is better with the help of nails or screws. For the manufacture of individual compartments, special glue or stapler for furniture will suit. It remains to decide how to make a wooden box with a seedler not just functional, but also beautiful. A little varnish or paint, a beautiful picture, and seedlings will become an excellent decorative element.

Seedlings can be decoration of the apartment

Ideas for registration

It is not necessary to make boxes with your own hands, you can take a ready wooden box. It can be an ordinary garden box, a box for tools, even an old chest. A little decor will add color, but sometimes it is not necessary to do anything, the non-standard application of the subject says for itself, an example in the photo:

Do not be afraid to experiment and use things are not intended.

Wooden tubs used to be used at home for high plants. Today they are appropriate in the garden. Several rudices with bushes can be an excellent alive hedge or perform independent elements.

Decorative drawers with flowers are often made with a bias in naturalness.. The surface is covered with varnish to protect and emphasize the texture of the tree. If the paint is used - it is more often a noble brown or on the contrary, light and tender tones. The main goal is to draw attention to colors, and not overshadow them with bright colors.

For registration you can use beautiful vintage patterns. For the cottage garden fits the country style. Not many know how to make a drawer aged. Suitable sample need to burn a little with a burner. Special attention to devote the corners and joints of the boards. Surface clean and coat with varnish. From above, you can simulate an antique stamp. The manufacture of such things does not take much time, but strongly affects the color flavor.

Benefits

Everyone wants to arrange your garden in accordance with your ideas about beauty, but not everyone can order exactly what you want. Often scares the cost of working on individual order. It's not so difficult to lend drawers for flowers with your own hands. This choice has many advantages:

The cost is much lower than the market price and all the more, work to order;
The drawing will help to make exactly what I want, and not to choose what is;
Wooden drawer with their own hands will always be an original thing, just a few who can repeat the design option;
It is easily easy to assemble the box of the desired size and the necessary dimensions;
You can make drawers of different forms with your own hands, but make them in a single style, observing the overall concept of the garden.

Make a drawer for colors under the power not even a professional. A tree is a material with which it is easy and pleasant to work. The usual ruler will help make the correct markup. The drawer with flowers gives the site its unique style, and you can make a permutation at least every day, updating the space in accordance with the mood.

Make your own hands with various useful things that are useful in home use, such as plywood box, it's not just a pleasant, but very useful. It is not possible to carry out free time in a similar way, not only contributes to relaxation, since at such moments it does not think about problems, but also will benefit the surrounding households and interior.

One of the options is simple in execution that do not require special material costs is the ability to make drawers with their own hands. As a material, a sufficient, reliable and aesthetic material can be used by Phaneur. This material is definitely easy to handle, is able to withstand a serious load, has a wide range of thickness. Products from it are suitable for all occasions. Plywood boxes can be used for storing trifles, tools. Many other valuable ideas of their use.

Plywood Treatment Tools

With the presence of high-quality tools, even an unprepared person will be able to make a drawer from plywood with their own hands.

Drill, which includes a screwdriver function
Electric jigsaw. First you can purchase a device with semi-professional functions. In addition to the tool, a set of pylons is purchased to perform various functional operations by them.
Stapler for furniture
Roulette

Material and fittings

Plywood for the bottom. Thickness is chosen depending on the purpose of using the product. It should be thicker than side walls and lid.

Plywood sheets for side walls
Cover material if the lid is assumed
Pens for cover
Planks, Tree Bars - For decorating
Finish and finishing nails
Piano loops
Decorative lining
Glue on wood
Wheels if you make a mobile box
Finishing lacquer
Wooden putty