How to make an iron man mask out of paper with your own hands in stages. How to make an iron man helmet: step by step instructions Pepakura iron man mask

Hello everyone!
Do you know who Iron Man is?
If so, then you are reading the correct article!
In this article, the method of making an iron man's helmet will be described in detail; for a greater visual perception, the author attaches a full photo report.

Let's start making!

We need the following:

Instruments:
- soldering iron;
- scissors;
- ruler;
- stationery knife;
- sandpaper.

Materials:
- cardboard (not too thick);
- polyester resin, or epoxy;
- fiberglass;
- paint (red and gold);
- switch;
- 2 batteries;
- 6 LEDs;
- wires;
- transparent plastic;
- small magnets, or Velcro;
- 2 small pieces of wood.

As you probably already understood, the helmet will be made of paper, namely, medium hard cardboard. We do the following, download the template provided by the author, and print it on a printer.

When all the details are printed, we have patience and begin to cut them out of cardboard, for this we use scissors, working with smaller details it is best to use a clerical knife.

Next, you need to download a small program Pepakura Viewer 3, it will help you when gluing parts, when setting certain settings, the program will show the sequence of gluing the parts. (Google will tell you how to set these settings correctly, you will learn and read about what this program is all at once).

As you can see in the photo, the parts are numbered, and so, each number should be glued with the same number (that is, for example, 122 with number 122), it is best to immediately put the parts by numbers, so it will be easier to glue.

We take our favorite glue and start gluing the parts. Since the edge of the cut parts will be folded, it is best to use a ruler for this. The gluing process is very long and rather tedious, so we have to be patient, it is best to do the gluing intermittently.
After hours spent gluing the parts together, you should have the following.

This helmet has a removable part, it is located at the bottom, and so, it is unnecessary to glue it to the base of the helmet. And there are also two triangular parts, they will help the helmet to keep the correct shape, until the time until the helmet is covered with polyester resin.
We carry out the process of covering the helmet with resin.

For this we use fiberglass and resin, two of these components will make your helmet strong enough. From the beginning, cover the outer side with resin, evenly applying fiberglass, smear the resin over the entire area of ​​the helmet with a brush. Next, we do the same operation with the inside, leave the product to dry.

Important!
This operation with the resin should not be carried out on a carpet or sofa, or the like in unsuitable places for this, select a special workplace for this, use gloves when working with the resin.

When the product is dry, we coat it again with two-component epoxy resin, leaving the part to dry.
After the part is completely dry, we take sandpaper and clean the surface, while removing all the irregularities, and giving the helmet a molded shape.

When you have achieved the desired result, you can paint the helmet. We close with tape those places that will be painted in a different color. First we apply one color, in this case red, then gold.

You should get the following.

Now let's move on to the back of the helmet, which is removable.
We cover it with resin and fiberglass, and then we clean it with sandpaper. If there are deep irregularities, you can additionally use automotive filler.

Pay attention to the ears of the helmet, on paper they are just round, the author decided to make them out of wood, namely, cut them out of not thick plywood, then fix them in place with glue.

Since the helmet, according to the idea, will be worn on the head, and it will not work to put it on without removing the back part, we make a fixing removable element that will connect these two parts to each other, for this we use small magnets, if there are none, you can use Velcro.

We make the teeth from two pieces of wood 10 * 2.5 cm, after making notches on them, paint them black, and then glue them to the helmet from the inside.

Now we turn to the electronic part, in order to make the helmet look spectacular, we make the backlight. For this we use 6 blue LEDs. We take a soldering iron and solder the parts according to the presented diagram.

Superhero theme is always popular with kids. Boys with great pleasure try on the costumes of the most famous characters. Of course, many shops offer matching outfits at a variety of prices. Especially popular is the character of comics and three wonderful films - Iron Man. It is his armor that almost every boy wants to try on. But typical carnival costumes are presented on the shelves, but you want something realistic. Then every parent has a question: how to make an Iron Man suit?

Iron Man Suit: The Beginning

If you decide to make with your own hands a wonderful costume of your favorite character for a child, then first, please be patient. This work will require a lot of time and perseverance from you. Before making an iron man suit, you need to study the real character in detail. Browse through photos of the hero of the film and flip through the comics. This will allow you to draw up an overall picture of the future outfit. Of course, it will be unrealistic to create real Iron Man costumes, but every parent can do an imitation.

After a detailed consideration of the necessary drawings, draw up a rough diagram of all the main parts of the costume. You can use the presented drawing. But before that, do not be too lazy to measure all the main dimensions of your child: head circumference, height, arm length, waist and pelvis.

DIY Iron Man: material for a suit

Making an Iron Man suit with your own hands is a rather difficult task, but doable. After the introductory part with the character, you need to decide on the material from which the superhero outfit will be made. There may be several options:

Getting Started: Iron Man Helmet

Better to use blueprints for the Iron Man suit adapted to your son's size. Otherwise, the child will feel uncomfortable and will quickly tear his outfit. Study the presented scheme in detail and increase it in proportion to the real indicators of growth and girth of body parts. The easiest way to make Iron Man is from thick paper (160 g / m2). Better to start with a helmet. This will give you the skills you need and make it easier to redesign.

We cut out each detail separately with an indent from the edge of about one centimeter. After we glue the parts together, it is better to try on at each stage. This is the only way you can perfectly fit your product to the required dimensions of a person.

Hero's corps

The back and chest are done separately. Again, a detailed drawing needs to be drawn up. Remember to measure your chest volume. All fans know that a specific lantern glows in the middle of the superhero's chest. It can be simulated using an elementary night lamp of the appropriate diameter. Just walk through the hardware store and you are sure to find the decor you need. Or use foil that will just shimmer beautifully.

In fact, it all depends only on your creative ingenuity. There are no set rules for how to make an Iron Man suit.

Arms and legs

The arms and legs are the most mobile parts of the body of any suit. In places of fold, it is necessary to make gaps or special transitions. Keep in mind that children are very mobile and you cannot restrain their movements. You can just make shin guards and gloves.

For shoes, it is better to choose sneakers or sneakers. Apply red paint from a spray can. Next, take a brush and draw the appropriate lines. Only shields can be made for calves.

The key is rigidity

Now you know how to make an Iron Man suit. After this, the structure must be made more rigid. To do this, purchase epoxy glue. Apply adhesive to all parts with a wide brush and wait for complete drying. It is better to leave the product for a day to ventilate and dry completely, only after that we apply paint and other decorative elements.

Configure right away that the process will take several days. You want to create a quality costume for your child, and not just dress him up in a box of household appliances. Don't confuse the robot with Iron Man. If in doubt about any parts, please consult your son. He knows everything about his favorite character.

If you still have a bad idea of ​​what Iron Man looks like, the pictures of the suits will help you finally figure it out.

You are not the first person to try yourself as a famous costume designer.

Many craftsmen have been able to create very realistic outfits for themselves and their children. This means that you have the power to please your child. Just be willing and patient. The satisfied smile of your child will be an excellent reward for titanic work and diligence.

After the movie "Iron Man" was shown on the screens of cinemas, the whole world exploded with the idea of ​​recreating an exact copy of his costume. Every fan of this hero also dreamed of wearing it at least once and saving the world from the enemies of humanity. Many people had a question: how to do it without spending a lot of money?

The fans of the film are not only boys, but also adult men who are also not averse to flaunting in such an outfit at a New Year's corporate party. Facts are known when quite rich people spent not only time, but also money on recreating the image of Iron Man, and some even quite succeeded.

First winners

The first world famous costume was assembled from plastic and fiberglass. In America, it was made from polyurethane slabs and sculpted clay. It is clear that the outfit was unfinished without a lot of various rivets, LEDs, servomotors and other necessary parts. Many craftsmen are still puzzling over the author's inventions of this costume. In this article, you will learn how to make a mask from Iron Man paper and also from other materials.

In papier-mâché technique

Any New Year's costume has a mask, it is she who complements the image and hides the face. Papier-mâché work is time-consuming, but worth it. A mask for a child under 10 years old can be made in the form of a three-liter can. We take newspapers and begin to glue the jar with pieces dipped in PVA glue. A short distance should remain free, so that later it would be easy to remove the mask shape from the can without cutting it. When everything is dry, take off the product and try it on to understand if the size fits or needs to be changed, at this stage everything is still possible. The next day, after final drying, outline the area of ​​the eyes and cut them out.

Now we need to draw the main lines. To do this, we look at the sample and simply sketch them. The next step is to create a relief, this is done using the same paper and glue. Let the product dry completely and see what happens. If you are satisfied with the result, you can start painting. The paints should be thick, it is better to use gouache. After the basic colors have completely dried, draw lines with a very thin brush. The metal effect can be obtained with golden paint. Now that you know how to make an Iron Man paper mask in an easy way, you can start mastering a more complex option.

We take paper

Every year before the New Year holidays, all parents have a question about a children's costume. If earlier you could just buy a mask of any animal and attach a ponytail, now children want to be just like superheroes. Therefore, parents start looking for the most interesting costume. There are those among moms and dads who want to make it with their own hands. The following information is specifically for them.

The first thing to do is to be patient and prepare everything you need. It is not a problem to find drawings today. We provide a diagram of how to make an Iron Man mask out of cardboard. It remains only to try to follow it.

Required materials and tools

To make an Iron Man mask, you will need:

• paper with a density of 160 g / m 2 or cardboard;
• cutting mat;
• big;
• old awl;
• ruler;
• tweezers;
• PVA glue for construction, epoxy;
• fiberglass;
• acrylic paint;
• scissors;

How to make an Iron Man paper mask

Having decided on the model, you need to cut out parts of the product and start gluing them together. When the mask is ready, give it some rigidity. To do this, we will cover the product with a two-component. To make the mask more believable, you need to glue the seams on the end parts with tape. These are the parts that will come apart in the finished product. Remember that working with epoxy requires caution and adherence to instructions. When everything is completely dry, you can start working with fiberglass. It is glued in small stripes to the inside of the mask in several layers. The next step is to give the product a perfect smooth shape. This is achieved with a primer and sandpaper. When the Iron Man mask is made with your own hands, you can apply paint, and after it dries, varnish.

Another variant

Nowadays a lot of people are fond of handmade. Many people make incredibly beautiful and exclusive things with their own hands. Why not please your child and make him a costume of his favorite hero ?! Below, another option will be described on how to make an Iron Man mask out of paper. The instruction is very simple and accessible to anyone.

The first stage of manufacturing is a printout of mask pattern patterns. We cut out the details carefully. The process is quite laborious, although the first time it may seem simple. Now we connect the parts that will later be immovable. The rest of the parts must be connected using openings. Now we make the mask more dense, this will help us. It can be applied both to the outer part and to the inner part. Let the product dry completely, then cover it with a primer to hide inaccuracies and various flaws. Now we start painting - the colors depend on the chosen model. The main thing is to apply the paint carefully to avoid smudges on other parts of the mask. It is best to use masking tape for this. Using a spray can, apply one layer of paint, let it dry and repeat the procedure. If you are using acrylic paint, it is best to paint outdoors. If, after everything is dry, you find some imperfections, they can be hidden with a simple color-matched nail polish. The product is ready - enjoy your work.

Now you know how to make an Iron Man paper mask. Go for it and be sure that everything will work out. A child or you yourself will have a bright, memorable fancy dress.

All children love to transform into fairy-tale heroes. They play their first acting roles already in kindergarten. Of course, every girl's dreams are to become a wonderful princess, and a boy's dreams are to become a brave knight. But if to transform the baby it will be enough to buy a beautiful and long dress, then in order to "equip" a warrior into battle, you will need a special costume and accessories. The first and, perhaps, the main attribute of all knightly uniforms is a headdress. So, you want to make the little boy an original carnival costume in a modern way? Then check out one of the many ways to make an iron man helmet. The instructions are given in the form of a step-by-step guide with comments.

What and how to make an iron man helmet: preparation

Before starting work, you need to decide on a few points:

• for what purpose it is planned to make a headdress;
• what the future product will look like;
• what will be its technological and functional characteristics.

If you plan to make part of the costume, for example, for a New Year's party, do not over complicate the work. It makes sense to simplify as much as possible the functionality of the helmet and its manufacturing technology. In the case of designing this main component of a superhero costume (photo 1), a completely different approach is needed to participate, for example, in an exhibition of works by senior schoolchildren. Here, both the appearance and its manufacturability will be of particular importance. This instruction: "How to make an iron man's helmet" is presented in the form of a description of the initial stages. Plan further work depending on the desired result, using various raw materials and technology.

Necessary materials

Use a fairly thick landscape paper or Whatman paper to make the pattern, and draw the lines with a pencil. For cutting, you will need a clerical knife, ordinary scissors and small ones, such as manicure ones (for neat decoration of corners and recesses). For a simplified version of the helmet, use corrugated cardboard (store box for groceries, cosmetics, etc.). Connect all parts with strong and quick-drying glue ("Moment" type) manually or using a special gun. For external design (covering parts and their fastening), you will need adhesive tape of various colors. The reamer of the iron man's helmet can also be made from a less dense material. This option is used if you plan to plaster parts and their further connection to each other, for example, with magnets.

Assembling the template

Photo 2 shows the drawings of the iron man's helmet. Parts of the pattern will, when connected, be located on the following parts of the head:

1. Ear.
2. Parietal.
3. Back.
4. Chin-buccal.
5. Nasal.
6. Frontal.

Knowing this condition, the parts cut out of paper will be easy to assemble into a single product. Photo 1 of the finished helmet will help distinguish the details, since almost all areas are colored differently and have clear connecting boundaries with each other. But still, before joining the product into a single whole, arrange the parts over a wide space and outline the places for gluing.

We make an iron man helmet from paper or cardboard

In order for this headdress to turn out to be voluminous, you need to skillfully arrange the connecting joints. To do this, especially in the places of curved lines, make small cuts that will help to give them a convex shape when gluing. Photo 3 clearly demonstrates this stage of work. After assembling all the parts together, tape them with tape of different colors. You can also use colored paper for decoration, which then needs to be covered with transparent adhesive tape. Give your child the opportunity to fantasize by creating a creative creation with a contemporary theme.

Application of complex technologies

Photo 4 shows how to make an iron man's helmet from thick paper (whatman paper). If you cover the assembled product on top with a thin layer of gypsum mixture and let it dry, you can get blanks for a more technological model. In this case, in the process of work, you need to think about how all removable or sliding parts will be connected to each other. The simplest and most suitable option with this technology is the use of magnets fixed inside. It is also possible to install rotating hinges in the cheek and chin area to make the front parts moveable. Outwardly, such a modern helmet can turn out to be especially attractive due to the use of a special luminous emulsion when painting. Well, the final stage of the work will be the installation of mini-bulbs inside the craft in the frontal region to illuminate the eye recesses. That's all, the helmet is ready!

This original craft can serve as a basis for creating similar headdresses for other fairy-tale characters. Create, embodying the most unusual fantasies into reality!