Rolled curtains from wallpaper. Blinds do it yourself from wallpaper: master class. Varieties of paper curtains

Blinds - the subject in the house, with which you can beautifully decorate any room. Homemade blinds from wallpapers are no worse than bought, as they definitely protect the room from bright sunlight and perform the entire function of the curtains.

The main plus of them is that by making them with their own hands, you will get unique blinds that will distinguish your interior from a variety of others.

In addition to uniqueness, you now have the opportunity to not throw out beautiful wallpapers, but make a useful thing for the house with your own hands.

Beautifully will look for paper blinds from the wallpapers of bright shades or with a catchy and a motley pattern. Thus, both in the folded and unfolded form, your blinds will look bright, fun, and they can focus on the room.

History of appearance

In order to make blinds from wallpaper at home, you need to understand what kinds are and that the blinds themselves are at all represent.

Similar dampers on the windows from the Sun appeared for a long time for people on the islands near the Caribbean Sea. The first of Europeans such blinds found Spaniards. In the tropical climate, with the scorching rays of the Sun, such a thing was particularly relevant.

This option still remains one of the most reliable and practical in protecting the room from scoring sunlight.

In the seventeenth century began to create blinds, which are already reminded by their appearance modern, that is, a horizontal type. Such blinds are very difficult to break, of course, if this is not intentionally. They are well clean, they are cleaned, it is easier to care for them.

In the twentieth century, people thought of creating blinds vertical type of fabric. Especially relevant such kind of damper for the kitchen, where the temperature is constantly changing, the increased humidity and many odors are preserved. Blinds will absorb all this, even homemade.

However, such a thing has its drawbacks, the main of which is the mechanism. This is a weak place, so when you create them yourself, it is worth pay special attention to the proper installation of the mechanism..

Plus homemade blinds - in the fact that when creating them, it is quite possible to do without buying expensive parts, you can use both infirred materials.The main thing is to use your own ideas and include fantasy.

Important! Do not think about what kind of idea cannot be realized. The main thing is not to be afraid, and everything will work out!

The advantages of the blinds made by their own hands

In addition to the relative cheapness of homemade blinds while maintaining complete impermeability, it is worth identifying some other benefits.

First, it is a multifunctionality. Usually blinds on the windows are made of phlizelin or paper. With their help, you can protect your windows during repair from damage and dust.

Secondly, they are a decent competitor to traditional curtains that many have already been tired.

Thirdly, such an alternative is suitable for any window, since you yourself fulfill an individual order for yourself.

Fourth, this option, as mentioned above, is budget, and you can save, using wallpaper remnants from past repairs to make such a useful craft.

Important! Such blinds are ideal for rooms that are located on the sunny side.

Paper blinds: simplicity and accessibility

As a rule, make blinds from wallpaper is the easiest. It will take the least time. Wallpaper is best suited for crafts, since locular fabric made of durable paper with impregnation.

Important! Wallpapers do not miss light, so homemade blinds will fully fulfill its main protection function from the Sun.

If you did not make repairs, however, you want to update something or just refresh the interior in your apartment, you can also purchase the wallpaper of such a coloring that you will enjoy the most and suitable for the overall style of the apartment.

Master class on the creation of blinds

In order to create them, you will need only a few hours, the main thing before that - to figure out how to do everything correctly and not spoil the material.

The following is a step-by-step instruction.

Materials that you may need:

wallpaper;
scissors;
rope;
awl;
stationery knife;
centimeter;
retainer;
glue;
scotch (single and bilateral).

To begin with, it is important perform window measurementsFor which you are going to make blinds. Therefore, with the help of a centimeter you need to measure the window opening. Everything must be calculated exactly and most carefully. As a result of measurements, it will become clear what is the length of the workpiece.

You need to divide the resulting height of the window to four, the resulting digit add to the height of the window. Such an action is necessary because when folding by the harmonic, the length of the wallpaper will decrease exactly on a quarter.

The cord with which you will close and open the windows must have the same length. It is very important to perform marking with special accuracy, since then homemade blinds on windows from wallpaper can be shorter or wider / already than necessary.

The next step will be cutting blanks. Next, you fold the resulting segment in the harmonica. Each part must be necessarily rectangular And the same in size.

Important! If you cannot perform this work "on the eye", it is best to use the auxiliary objects, such as a ruler or pencil.

It is desirable that the strips have a width of three to five centimeters. This is the most ideal option in which paper blinds with their own hands will look smoothly and not rude.

The next step (after the harmonica was marked and folded) - you need determine the middle of future blinds. With the help of sewing you need to make holes, after which they strengthen them with scotch.

Important! If you do not want to create blinds for a long period of time, this procedure can not be carried out.

In the hole you need to turn the cord and consolidate it with a node on the other hand. Important after that plan a web for determining the size of the cord. An unnecessary part is to cut off. In order to fix the right position, it stands on his tip dress down the lock. The location of the top end of the cord needs to be fixed too: you can do it, just knitting the knot.

Some details, how to make blinds from wallpaper, you can look at the video:

At the top of the blinds, you can also stick two-way tape and attach them to the window.

Important! If you want to make blinds in an unusual style, it is worth showing a fantasy.

The bottom of homemade blinds on the windows of wallpaper can be issued using a peacock tail, bows or drawings. This can be done both from the inside and with the one that will be visible from the street. Now homemade blinds on the windows are fully prepared.

It is worth noting that in order for homemade blinds to keep on the windows, it is enough to use two-way scotch.

You can also see the master class on creating blinds from wallpaper on video below and clarify some incomprehensible things for yourself.

Disadvantages of homemade blinds

The main disadvantages of homemade blinds from wallpaper - Scotch remnants on painting, as well as difficulties in fixing.

In order to glue the blinds at exactly, you should first stick to the scotch window, and only then attach the blinds. In any case, it will be difficult without third-party assistance, as it is important to do this work neatly and smooth.

Consider what it will be necessary to attach the product from above the window - This is the main inconvenience, so better contact your loved ones: it will be difficult to cope alone.

In the event that a tape remains on the window, it can be used to remove it with a wool or a cotton disk, which was moistened in vodka or in a 70 percent solution of medical alcohol.

Read about how space transforms: expanding the effect of such images on the walls is amazing!

Original blinds at home

Of course, the simplest option that can be done at home yourself is ordinary blinds of the harmonica. But if you want to make a highlight, it is worth a little to give this lesson more attention.

For example, in order to diversify the design of this window tool, it is worth the weightlifier not one, but two. To the top of the blinds you can attach a bar, and then install it on the window opening. The design, though it turns out quite complicated, however, the blinds will look like bought, and will also hold on windows for several years.

Important! For such an option, it is possible to select exclusively fliseline wallpapers. They are more durable and durable than paper.

It is worth noting that it is absolutely necessary to do blinds from wallpaper with your own horizontal type hands. For the cottage it is quite suitable and vertical. The mechanism can be not created for such blinds, as the drafts in the room or the breeze will break them: thus, the room will enter the room.

When creating vertical blinds from wallpapers, they should be divided into uniform pieces, while do not need to cut them to the end. It is enough so that from above each strip remains the whole. Next, you can attach such blinds or on the homemade bar, or on bilateral tape.

Video instructions: how to do blinds from wallpaper quickly and easily:

Considering that in the modern world everyone wants to stand out, it is preferable to some things in the house designed for the decor and design of the room, do it yourself. To date make a personally can actually do any thing.Since the choice of materials and opportunities in general is wide and diverse.

You can always decorate the room of your home: for example, take advantage of the idea of \u200b\u200bcreating homemade blinds from wallpaper. Make them very simple, and most importantly - quickly. Make a highlight and uniqueness in the interior of your home, using our recommendations.

Blinds from the paper recently are greatly popular among the hosts wishing to create a unique comfort. This version of the window decoration is universal and multifunctional. But not everyone knows about the method of making blinds from ordinary wallpapers. Such a solution looks economical and original. To create such a product, you must have a minimum of knowledge and skills. In this publication, you will learn how to create blinds from wallpaper with your own hands.

The heat of summer days of even the most resistant to the high temperatures of people makes hide from merciless rays of the sun. This is especially true of residents of the apartment of high-rise buildings, the windows of which are directed in the south side. But not always financial capabilities allow you to buy high-quality blinds. Sometimes there is no time and desire to wait until they are made in accordance with the necessary parameters

That is why the question, how to make blinds with your own hands, becomes relevant than ever. For the manufacture you will need materials that are at home for everyone. In addition, at this time, the use of blinds from wallpaper with your own hands (the use of such products can be found in the interior) - frequent phenomenon. This is not only the original, but also an affordable element of the decor of the room. Also this is a reliable protection of the room from overheating, and the curtains - from burnout.

Paper blinds fit harmoniously into the design of any room. But considering the characteristic of the material, the curtains are better not to apply in the kitchen and in other economic premises. Organically look blinds from wallpaper on the windows of summer houses, verandas, loggias and on.

This product has many advantages:

it can easily create houses with their own hands;
reliably protects the room from sunlight;
unusually decorates the window;

it is possible to use any pattern or pattern;
does not interfere with colors on the windowsill;
suitable for the interior of any style;
you can change every week.

Paper blinds will prevent extra destruction, and also get rid of the owners from repeated need to go to the workshop. On the homemade speed should be spent only hour or two, no more.

short life;

fast wear;
compared to salon models have a cheap view.

Blinds on windows with your own hands: Types of structures

Invented blinds of the Indians of West Indies. Their models were distinguished by the presence of shutters with inclined wooden planks that were securely protected from the Sun. Such blinds were called colonial.

In the 18th century, Venetian blinds appeared. The design of this model was characterized by the fact that the internal parties were attached with the help of hinges, and the external - cord. This made it possible to change the slope of lamellas in accordance with the time of the year and the weather.

Modern types of products are classified depending on the material from which curtains are made and on the method of their adjustment. Consider the most popular designs:

Vertical models - blinds, in which parts are placed vertically and can be rotated under the necessary angle. You can adjust the rotation of the lamellas using the cord.
Horizontal products are curtains decorated in the Lestenka system. Lamella are placed horizontally, and their setting is performed by a special drum.
Roll curtains - blinds in the form of a cloth of fabric or paper, which turn into a roll with a special mechanism. Such products are the perfect choice for the living room.
Plissee blinds - the material of the curtains is complex in the form of a harmonica. Adjustment is carried out by special cords and ribbons, at the ends of which there are special locks.

Choosing the blinds, you need to pay attention to the window shape for which the curtain is intended, as well as on the material and ease of regulation.

Helpful advice! People who want to independently control the level of illumination indoors, it is better to choose horizontal models or blinds-plots.

What you need to createblinds with their own hands

The question of how to make blinds yourself, interests many women. Even people who have never been engaged in needlework will be able to make curtains from wallpaper. But before starting work, it is necessary to choose the material for the product, tools and decorations for the decor of the finished curtains. And the creation process itself will take no more than 2 hours. Making time depends on the selected model.

To make blinds from wallpaper with your own hands, you will need such tools:

sharp scissors;
hole punch, sewn or similar tool;
line;

tape measure;
pencil for tags.

There are such devices in any house, so they do not have to buy them specifically. As a material it is necessary to find:

Basic curtains - wallpaper. You can use residues saved after repair.
To fix the position of the clutter, the blinds are used or decorative cord.
Adhesive for connecting parts.
Normal and bilateral scotch.
The retainer (the usual bead is suitable, clothespin under the color of wallpaper or hairpin).

Helpful advice! The quality of the curtains depends on the properties of the base. The kind of material, the better the blinds will work. It is recommended to choose dense wallpaper, thanks to this, the product will not break long.

If you choose the restrained coloring of the web, then the curtain will burn slowly, and therefore the aesthetic appearance will remain for a long period of time. It is also better not to use a material with too large pattern, as this may affect visibility in the room.

How to make blinds from wallpaper do it yourself: step-by-step instruction

Blinds made from wallpaper are often used on windows at the cottage, balconies, balconies, verandas, as well as in rooms, whose windows overlook the sunny side. They look original, and the cost of manufacturing is minimal.

It is ideal for such products for non-standard sizes, because often buying curtains for these windows is problematic. In addition, these models, due to the density of the material, are able to fully protect the room from sunlight.

Before starting work, it is necessary to remove everything too much and prepare a workplace. After all, for the manufacture of high-quality and beautiful curtains you will need a lot of free space. It is important to prepare all the necessary materials and tools.

It will help to easily make blinds from wallpaper with your own hands. Step-by-step instructions:

using a roulette, measurements of windows windows are performed for which homemade blinds are made;
since the product canvas bends in the horizontal side, then it is necessary to add one fourth of its value to its length or 30-40 cm. In this case, the size will be correct. With this width, you do not need to change. For example, if the height of the window frame is 135 cm, it is necessary to add another 25%, which in this case is 35 cm. As a result, a cloth with a length of 170 cm is required;

the length of the decorative cord or tape should be more product size, it is necessary to take into account the wing of bows or nodes. Also, this value is influenced by the method of fixing the lower part of the blinds;

Article on the topic:

Types of rolled curtains. Advantages. Installation options on the window. Features of the installation of rolled curtains with their own hands.

next, wallpaper spread and cut the desired rectangle from the material. It is important to trace that the drawing on the canvas is not distorted and has not cut off. So that the roll on the table is not turned around, its edges can be squeezed with a small cargo. If the window is larger than the width of the wallpaper, it is possible to connect two canvases with glue or tape;

place the corrugation and bend the canvas. Strips must be smooth and parallel relative to each other. The width of the bend is better not to do more than 7 cm. The optimal size from 3 to 5 cm. To be used to be smooth and clear, it is recommended to use the ruler;
you need to try on an unfinished cloth to the window. If you need, it should be unnecessary;
depending on the model, the curtains on the folded material of the pencil mark the middle of the middle or 15 cm from the edges, leave a mark for piercing holes. In the first version, one cord will be mastered in the center of the blinds, in the second - two on the sides;
the holes on the marked strip are done by holes. Also for this will suit the sewer, screwdriver or any other similar tool. The resulting hole must be slightly expanded to through it freely it was possible to skip the rope or tape;
to strengthen the paper, use scotch. To do this, it is necessary to salary holes from two sides, after that they are re-made a hole panel;
next, through the holes, stretch the durable tape or cord, then lay the harmonica along the canvas. The upper end of the tape is fixed by the node;

fastening the blinds to the window is performed using bilateral tape. To do this, at the end of the curtains, on bend, glue a strip of adhesive tape so that it completely covered the bend. After that, the protective coating is removed, and the product is attached to the window;
below the blinds are drawn up in the form of a fan. For this, several latter strips are connected to the PVE glue or glue with scotch. The cord or tape is fixed from the window. Another option to design the lower curtains - leave it rectangular, toning from the bottom with ribbons;
in order for the blinds not to go along the entire length of the rope, the latch can be put on the bottom edge. In its quality, you can use a conventional bead;
the product is ready.

This is one of the options, as from wallpaper to make blinds for the window, but there are a lot of such instructions. The order of the design items will be similar, but there may be some differences that depend on the type of blinds.

There is an even simpler version of the fault blinds, at which you do not even need to be tape. In this case, the required wallpaper length is the harmonica, as in the previous version. To the frame, the finished curtain is mounted double-sided scotch, and the lower part is fixed with a clothespin or a hairpin, forming a beautiful peacock tail.

Helpful advice! Holes through which the cord is done is necessary to handle scotch, otherwise the product will quickly collapse.

Make curtains blinds with your hands from paper very easily, quickly, and most importantly --Evo. You can use unnecessary pieces of wallpapers that remained after repair, and ordinary utility tools. Decorate the finished product is recommended using rhinestones, sequins or drawings. If you wish the clutch of the blinds from the side, which goes outside, can be saved by foil. It will help to reflect ultraviolet rays, not giving them to heat the room space.

In the case of architect windows, paper blinds will help to decorated them stylishly with the help of elegant fans from wallpaper. This method will not only save from the Sun, but will bring a special charm to the interior and emphasizes the unusual shape of the window.

If there was a need to close only the upper part of the window so that the sun's rays do not fall into a certain section of the room, for example, a desktop or a children's cradle, then the curtain in the form of a fuel will fit well. It is possible to attach it to one of the corners of the frame. This option is originally and stylishly as an inside of the room and outside.

You can also watch a video, how to make blinds from wallpaper with your own hands.

Blinds from wallpaper: varieties of paper products

Homemade blinds are able to make a variety and unique flavor to the interior of the room. There are several options for such products. Consider them more detailed.

The curtains in the form of a harmonica on a ribbon or a lace and a model with a similar design are enjoyed by popular popularity, but on two tightening ropes. Usually in such products they are located vertically and parallel to each other, but on different directions from the edges. Stock Foto Blinds from wallpaper will help to harmoniously enter this model in the interior of the room.

It should be remembered that for the manufacture such a curtains you need two clamps, and the consumption of the cord and the scotch will be twice as much. This model is identical to this factory curtains. Such blinds perfectly close the windows, which means they protect the inhabitants from sunlight and curious eyes passersby.

Very popular paper rolls. They look impressive, and also perfectly cope with a protective function. Since such models are tightly adjacent to the window, they remarkably darken the room. Make rollers with your own hands very easy. Often, the fabric is used as the basis for such a product, and not paper.

Helpful advice! To create a roller, it is recommended to use paper first. After all, a piece of spoiled wallpaper will cost the hostess much cheaper than the cut of the tissue of the same size. But rolled curtains from matter look more spectacular.

An equally original type of paper blinds is the Roman Curtain. For the manufacture of such a product, more material will be required, and some skills are needed. But they look so original and beautiful, like lambrequins or ordinary curtains.

Any version of the blinds from wallpaper will be an excellent option for decorative window decoration.

Production of rolled blinds with their own hands from wallpaper: master class

There is a huge number of ways of manufacturing paper blinds with your own hands, step-by-step instructions, master classes, thanks to which you can quickly get the original and cheap decorative addition window.

You can see the features of manufacturing on video blinds from wallpaper with your own hands. The main thing is that the changer does not need to be folded in the form of Plears, but it is enough to wind into a dense small roll. Also disappears the need to make holes for the cord. The fastening system of this type of blinds is different from previous models.

Before making blinds with your own hands, you need to prepare the tools:

drill;
metal hacksaw;
pieces of wallpaper;
metal tube with a diameter of 1.8 mm;
wooden or plastic bar for a plumb;
fastening for blinds 1.4 - 2 m;
superchalters (for gluing fabric to metal);
double sided tape.

Instructions for creating blinds with your own hands from wallpaper Stepgovo with photos:

Removed window measurements are transferred to paper.
The length of the future product should be increased twice. Paper must be folded in half - this will ensure the density of the roles. In addition, a quarter from a total length should be added.
The resulting piece is folded in half. The edges of the material are connected by glue or double-sided adhesive tape.
Unlock the metal tube of the required length.
At the ends with a stapler, pockets are made in which you need to put small weights. Also, a wooden bar or plastic tube can also be used for a plumb.
The glue is applied to the wallpaper and glued them to the prepared tube.
Mount the blinds on the window. On the frame in size, the curtains are made marks. Using a drill, fasten the resulting product to the window.

Rolled blinds can be made easily, quickly and efficiently; And they will not differ from the shopping options.

Two-layer paper curtains with air layer: Step-by-step instruction

This option is a bit more complicated than previous models, which means it will take a little more time and effort than ordinary pliers. But such a product looks more stylish and respectable, and it also reliably protects the room from the heat.

For the manufacture of two-layer blinds, the wallpaper must first be placed, and then cut into a strip of about 10 cm wide. Cut strips must be twisted into the tube and glue the edges by 1 cm. Data tubes should be such a quantity to have enough to the entire height of the window.

When the glue dries, the tube must press to flat lamella, so that the ribs are clearly formed on the sides of the part. It is necessary to fold so that the place of the sickness is in the middle of the upper side.

Next, the middle line of each lamella band about 1 cm is lubricated with glue, then all elements are connected to each other. During operation, the glue should not be spread, so it is better to use dry. Stack of cocned tubes leave until complete drying. Only then you can deploy the resulting design.

At 15 cm from the edges of a shell or other similar tool, it is necessary to do holes, through which the cord is passed. It will not be seen outside, because he, which has been shifted through the edges of the rope, will pass inside.

You can hang such air blinds using two rings tied to the upper ends of the rope. They are hanging on hooks, which are screwed into the top window opening. In the case of plastic windows, you should use two-way tape, since the curtain made is very easy.

Wallpaper blinds: video-Instructions for creating paper curtains

Made independently blinds from wallpaper - an excellent choice if you need to quickly drill the window. Paper curtain made from remnants of unnecessary wallpaper - excellent homemade premises from the bright sun. Such blinds perfectly complement the design of an apartment or at home and are a worthy alternative to ordinary curtains.

Make such blinds on the windows of the wallpaper are very simple and no need to spend a lot of finance and time. There is a huge number of master classes and instructions for creating blinds from wallpapers with their own hands step by step. This is exactly what the huge popularity of products.

The interior decoration of the house or apartment requires a lot of strength. During it, it is necessary to consider everything to the smallest detail, including decoration of windows. For the design of window openings, many use the curtains. These products are offered in specialized stores in a wide range. But if you wish, you can make yourself beautiful and original curtains from wallpaper. But before you begin to carefully consider the main features of the execution process.

Before the manufacture of Roman curtains from wallpaper residues should be carefully familiar with the positive qualities of these products. And they have enough of them:

high degree of availability. The curtains made with their own hands will cost cheaper in contrast to the finished product, even if there will be expensive material for their manufacture. At the same time, their annual replacement will cost inexpensively and will save the budget;
simple manufacture. The process of creating data Curtain does not require special skills, greater experience. Everything is performed quickly and easily;
you can make a beautiful product for the decor with the original design. We usually meet monotonous curtains that do not have an attractive appearance. But with the independent execution of the blinds, you can make original additions, decor elements;
for the manufacture, you can use wallpaper with a washing structure. It will make it much easier to care for the curtain, and will also extend its service life.

What you need

The fulfillment of the Roman curtains from the wallpaper is not at all difficult, but even to perform with their own hands requires careful preparation.

If you want to make original blinds with an unusual design, it is necessary to purchase the necessary means to perform work:

we select wallpapers. They should be one color, with the same pattern. For work, you can use balances;
scissors with a sharp blade. This tool will prevent the formation of chances;
a sharp sequel for piercing holes. This element can be replaced by a simple nail;
measuring tape, ruler;
a simple pencil that will be marked. It is undesirable to use a marker or a marker, they can leave intimate traces;
cord for decor. In order to create a beautiful chart, you can use a ribbon of satin fabric;
scotch, glue, stapler;
means for fixing. This is a special element, which is used in clothing to limit the swelling shoelains;
when the workflow may require a hammer and a tree bar.

In addition to the necessary tools and materials, it is also necessary to prepare a place to work. It must be spacious and comfortable.

Making options with their own hands

How to yourself? This process can be performed using several methods. The main thing is to accurately comply with the sequence of work, then you can get the original curtain for the living room, bedroom or kitchen. And if you have your own idea, you can create a designer product for decorating the room.

Classic option

It should be done on a flat and spacious basis. This is required in order that when unwinding the roll there is no distortion, and accuracy was observed when it was done.

Creating a curtain from wallpaper is performed according to the following scheme:

the first thing is measured by window opening. It is worth paying attention to an important condition - the curtain can be inside the frame or on top of it;
the width size will be constant, but the length size can increase. For example, if the size of the window opening is 120 cm, then it is worth adding another 25% to this indicator, namely 30 cm. As a result, the length of the sliced \u200b\u200bweb should leave 150 cm. This indicator goes taking into account the folds;
next, roll off the roll on a flat surface, measure and cut off the desired fragment;
on the invalid side, the lanes is made to create blinds. This process is performed using a ruler and a simple pencil. The width of the lines should be from 2 to 3 cm;
the initial fold is performed using a ruler, it allows you to fix the required level of flatness. The first element is flexing the rest. Everything needs to be done exactly in accordance with the markup, if there is a breakdown, it will be allowed to deform the following sections. As a result, it should get a product similar to the harmonica, which should not spring;
placing a cord on the side. To this end, the edge of the canvas should be made an indent to 10-15 centimeters and pierce two holes;
you can accommodate cord in the center. In this case, the holes in the central part of the canvas are pierced. For this, the harmonica should be folded and put it on a flat wooden bar. In order to quickly make holes, you can use a hammer. Hole can be done with a seboard or nail;
after that, the obtained holes should be expanded slightly and turn the rope or ribbon through them. The cord must move through holes freely, but at the same time he should not hang out;
from the bottom side, the tape is recommended to be consolidated with a means for fixing, with an upper - tape of a two-way type. If the edges of the satin ribbon will bloom, they need to be burned;
the finished design can be attached to the two-way tape for the selected place. We release the lock and straighten the chart;
if the tape is running in the center, then after breaking the curtains, the edges can be collected in the form of a fan and secure the secret method.

Blinds are one of the few accessories in the design of the house, which combines the function of decorating space with enviable practical performance.

Transformation window opening, the canvas helps to adjust the level of illumination of the room during the light day, and in the evening it helps to create a cozy confidential atmosphere, hiding what is happening inside the house from the views of curious passers-by.

A surprise for many property owners will be the fact that on the acquisition of blinds can be saved. You can easily make them without any problems using wallpaper and a basic set of tools available in every home.

Paper blinds: Acquaintance with the specifics of using and creating

In interior design, homemade curtains from wallpapers look worthy. They can decorate any room - the kitchen, a hall, a children's room or a dining room.

The accessory has light weight and modest dimensions, so its installation does not differ in difficulty. The cost of buying materials and accessories is minimal, which is also important for far-sighted and rational home masters.

They are best to bet on wallpaper with a dense texture, which is manifesting resistance to rupture and deformation, but at the same time the light is missing well.

Their shade and print may be different. You wanted blinds with a bright monophonic web, on which there are no large geometric patterns or complex suitius drawings, visually spraining the room space and make the window overly catchy.

Preparation for work: Choose tools and materials

To make blinds from wallpaper with your own hands, you need not only a step-by-step instruction and a comfortable homemade workshop with a calm atmosphere for work, and a number of tools. These include such an inventory:

santimeter tape or long line;
scissors;
sheet of paper and pen for writing measurements and drawing up the product drawing;
acute awl;
hole puncher;
tape for finishing (you can also use braid or cord);
glue;
retainer;
double-sided tape;
ordinary adhesive tape, etc.

As for the main materials, then at hand you need to have several cuts of wallpaper wallpapers and density. So everyone who remains after repairing pieces of the canvas can be used with benefit, makes the blinds that protect from the sun and extraneous eyes. All work will take a couple of hours. It does not differ in difficulty and complexity.

To make classic, strict or cool blinds from wallpaper, you need to follow a specific action plan. The phased work scheme is given in the current section:

Removal of measurements and preliminary calculations

First of all, you need to arm a centimeter tape, a piece of paper and a handle to remove the measurements from the window and write them. Next parameters need:

window height;
width;
frame configuration.

Having received these values, you do not need to rush and take for the prepared materials and tools. Self-making implies the creation of the simplest sketch.

Without it, the result may be inaccurative. So, the width of the accessory is left unchanged and recorded on a sheet of paper, and 25% add to the length and also record the obtained value. Next draw a scheme of the accessory, pointing to it the place of attachment, etc.

When the sketch is ready, get acquainted with the work plan. So, the length is taken with a margin in order to assemble the wallpaper "accordion". The length of the cord, sold in the canvas, is also calculated with all allowances and nodes.

After that, we begin to cut the canvas. Wallpapers are laid out on a flat surface - it can be a large dining table or floor, tolerate the drawing on a natural scale, all carefully check with a roulette and, if necessary, make adjustments.

After making sure the drawing is correct, the canvas is cut into sharp scissors, following the cutting line to be smooth, neat and aesthetic.

To make blinds from wallpaper, cut off the blank are in the harmonica. The optimal width of the fold should be in the range from three to five centimeters. If you exceed these norms, the result will lose in appearance. Next, on the resulting "harmonica" from the wallpaper, they measure the middle and do the holes for the cord. They are strengthened with scotch in order to avoid breaking the canvas in the process of intensive operation of the accessory.

The cord can be traded from both sides, then homemade blinds will look solid, as well as analogs of plastic, wooden lamellas or metal slats.

The holes in this case are done on both sides of the paper "harmonica", measuring the same distance from the edge of the canvas using a ruler.

Then the two-sided adhesive tape is used. With its help, the wizard strengthens the top foot of the curtains, which will serve as fastening the accessory on the window opening. Within the framework of this step, the cord is more reliably fixed, which has been extended by the length of the entire canvase.

Next, draw up the bottom of the canvas. It can be made in the form of a semicircle or leave the shape of the rectangular, simply strengthening the lower strap with adhesive tape. At this stage, work with the cord - its residues fasten the node, the surplus is cut and thrown out.

The last barcode is the cord equipment by the latch. It is used to control the cycles of raising and lowering the canvas. The free end of the cord can be issued in the form of a node, reorganize with a large bead or bow.

On this work is completed. You can start the installation of the accessory in the window opening.

How to install an accessory

To attach the finished accessory to the window to the window, you need to use bilateral scotch. The desired amount of this consumable material is measured by the ruler, cut off the tape and fix on the upper step of the blinds.

Next, the canvas hang to the imaging, removing the protective layer with the adhesive tape. Installation takes several minutes, and upon its completion it will be possible to test ready-made blinds - open and close them with a cord, adjust in height, etc.

Curtains from wallpaper with your own hands: Review of non-standard options

In addition to classic blinds with a solid cloth, the wizard can create many other configurations. It is interesting for Plistes from wallpaper, canvas with parallel with cords, extended through the retainer and other stylish and unusual crafts from wallpaper. They can be additionally decorated with appliqués, small decorations, bright shoelaces.

Looking through the photos on which stylish ideas for home and soul depicted, the masters will note that the blinds can be transformed in other ways. Their choice is imperceptible, so it remains only to find a non-trivial and original idea to their taste and implement it in practice.

Scope of application of the finished accessory in everyday life

Blinds from wallpapers with their own hands is an economical solution to solving the problem of heat and stuffiness in rooms located on the sunny side of the house. They can also be used as decorative decoration. Residential people use this invention and during repair.

They quickly make protective blinds and hang them on the windows at the time of blissing and sticking wallpaper, thereby preventing glass pollution with glue, paint, enamel, gypsum composition for wall decoration, etc. At the end of the repair, the accessory in a few minutes is dismantled, enjoying clean windows and shining Ramami.

Application of accessory and commercial objects. With their help, you can revive the boring office decoration of business space, shop or warehouse. Such a decor can afford any business owner, because for its acquisition you will not have to repaint the budget of firms and look for ways to save money.

Subtleties working with material for creating blinds

There are several nuances following which will provide an excellent result:

When using wallpaper with a pattern or print, you need to show extreme attentive care. If the cloth turns, it will immediately lose sight, because a beautiful image on the wallpaper will be distorted.
The quality of the materials strongly affects the appearance of the finished blinds, so for a decent result, good expensive wallpapers are needed, which do not burn out in the sun, look solid and presentable.
On the Internet there are many detailed master classes. After reviewing them, you can borrow many useful ideas for creating stylish blinds from wallpaper residues.
Large patterns on the canvas can reduce the quality of light through the window through the window, making the atmosphere in the gloomy and gray room. Therefore, they should be refused and stop the choice based on a small pleasant ornament, which is designed in a bright color palette.
Dense flieslinic or vinyl wallpaper is the perfect choice for long-term use. Made of them blinds retain aesthetics even a few months after installation.

Like other smart ideas for the house, the personnel making of paper blinds has several significant advantages. This is a low cost, simplicity of the implementation of ideas, a worthy result. Owners of houses, apartments and phasendes that took the above recommendations will be able to experiment with the accessory design, selecting the color of the protective web for the window opening in accordance with the individual features of the interior.

Blinds from rolled wallpapers with their own hands - economy option for those who appreciate comfort and comfort. They can be created from wallpaper and auxiliary tools due to the step-by-step instructions, which is described in this article. They can be placed in any room at home or apartments, be it a bedroom or living room. Below is a detailed master class, which will allow you to improve the housing. In addition to the auxiliary instruction, the video is presented in which each step of making self-made blinds is shown in detail from the most ordinary wallpaper.

Main types of light-protective

Devices that are designed to protect the room from the penetration of unwanted sunlight. As a rule, they are two varieties: vertical and horizontal. They consist of plates (lamellae) of the same size. These plates can be both fixed and rotated around the axis to regulate light or air flows.

Views differ in the type of construction, as well as the material from which they are made. An incredibly complex mechanism of the product with separated slats is quite often due to the broken components. Even upscale models are not protected from breakdowns. That is why the main advantage of self-made models is their reliability.

Wallpaper Blinds: Practical, Aesthetic and Extreme Budget Window

If you understand the types of this device in more detail, such varieties can be distinguished:

Pliste. Fabric canvas, which folds in the form of harmonica. It is powered by special cords and ropes, at the ends of which clamps are fixed.
Vertical. Represent a design, the lamellas of which are located in a consistent order. They can easily be rotated under the desired angle and adjust the cord.
Rolled. Present a fragment of a material that collapsing with the help of the existing mechanism.
Horizontal. The essence of the work is based on the Lestenka system. Plates are placed horizontally. Regulation of this species occurs with the help of a spinning drum.

How to make it yourself

Create a working structure of this device using low-cost firing materials is easy even to those who are very far from handmade. The manufacturing process does not take a lot of time and strength, and the cost will be minimal.

List of materials that will be useful in the process:

Remnants (if there is no desire to buy a whole new roll for further work);
Lace and meter;
Scissors;
Pencil and eraser;
Scotch (simple traditional and bilateral);
The most ordinary clamps.
Hole puncher;

Thanks to a huge variety of wallpaper patterns, you can get a product that will suit any style of the interior.

All these components can be found in any farm, so there should be no difficulties with their search.

Council. Choosing a wallpaper to create blinds. It is important to pay attention to such an indicator as color: they must have a pastel shade so that the room is not too dark.

After all materials are prepared, you can proceed to the manufacture of the product. It is important to accurately follow the step-by-step instructions in order to obtain the acting blinds that will protect the room well from excessive light penetration.

Making master class

Today you can find an innumerable set of interesting variations in the manufacture of this useful and beautiful product. As a rule, each of them has the same instruction, depending on the variety of the product.

Detailed Blind Creation Plan:

Initially, it should be competently removed: determine the perimeter and decide what will fit into the room anymore.
Quantity is required to add a quarter, but the width should remain the same. It needs to be done in order after the manufacture of the design was working.
The length of the cord must have a margin because they will need to be tied at the ends.
The next step will be the preparation of the wallpaper canvas. If they are with an ornament, then it must be competently selected and in the process of cutting it is important not to break it.
Fragment of wallpaper must be folded into the "accordion". The thickness of each fold should not exceed 5 cm. If you make the width of the folds thicker, then the product may lose its appearance. The correctness can be checked after all manipulations - the end of one of the sides of the web should have the appearance of the letter "l". It will become the bottom of the product.

Making blinds from wallpaper does not differ in difficulty and lies in a few simple steps

Finishing moments in the creation of blinds

There are several decisive steps left to make blinds protecting from unnecessary bright light:

The next step is to find the middle of the canvas. Here you need to do hole holes. From the back side to fasten your scotch and repeat the action.
In the hole, enter the cord, and then recharge the cloth to find out which length is required. The upper end needs to be secured by the knot.
Next, you need to prepare mounting to the window frame. Bilateral tape should be attached for the entire length of the upper end of the blind.
On the last strife on the left side, glue a piece of adhesive tape.
The bottom will occupy in the form of a "peacock tail". Creares five lower folds and coping them with scotch. Cord wrap on the opposite direction.
On the cord fasten the clamp. It must be tightened to the top, if you need to lift the blinds, close the window - omit the cord mount to the bottom.

Council. To enlarge the appearance of the blinds, you can decorate them with various decorative elements and decorations suitable for the style of products and interior.

The manufactured product is not only spectacular, but also useful, practical, functional. It can decorate any room, save money and the process of creating it will not take much time. In addition, you can feel like a real designer and with your head to plunge into an exciting process of creating this product required in each life.