Computer table is one of the main things to ensure convenient and comfortable work at computer. Someone can be bought in the store, and someone-self-made. Today it will be about those computer tables for which standing standing.

Why?

Because it will be more useful for health. Many can disagree with it, but I can try to try everyone.

Changing a computer table is possible in two ways

1. Raise only keyboard, mouse and monitor on need level.
2. Raise the height of the table top.

1. Raise the countertop

Creative ways - weight

Composite table top with built-in trash boxes.

Here, under the tabletop, a box with a trash and a small library was successfully located.

Pretty working option, you can work at the bottom of the laptop at the top for its continuation.

Brutal version of the submet

Coca-Cola in the office in the office)

And again two composite composition.

Minimalism in the spirit of Apple)

Some photos can embrace, but this is one of the easiest solutions.
Use everything at hand and not to look for another. As for temporary use it will be quite good.

I want to list the list of items that were used for these computer tables:

• Books
• Chairs
• Stools
• Boxes
• Shelves
• And even banks from chips!

Disadvantages of this method

• Unstable
• Insufficient working surface

The advantages of this method

2. Raise the table entirely

Varintines Internet can also offer not a small set, here are some of them

Looks like the desktop of the NKVD employee.

This is apparently from the same building as the brutal version above, apparently disappears slowly on bricks. Judging by the fact that the guys in shorts they have warm and the walls are not particularly needed)

Conceptually. Borea Market Mac Edied.

A table with a computer fit, because it stands on any other as on old computers.

Completely stylish leg extensions.

The fantasy of people is limitless, these items are found under these tables:

• Slagoblocks
• Putting paper
• Chairs
• Pockets
• Wooden countertops or something like this

Disadvantages of this method

• A complex transition from the mode standing in the sitting mode
• Need a strong material, and such that we can withstand the weight of the table with a monitor and other things

The advantages of this method

• No loss working surface
• The table will be the same strong as if put it on the floor
• At such a table is more familiar to work simple methods You can upgrade your own computer desk And turn it into the table to work.

Try, experiment and know that it all depends on your desire and fantasy.

Well, if the search is not trivial and not in everything convenient solutions not for you, then you can

Furniture - Improve, Capture, Rent (Part 2)

The folding wooden bench, which is convenient to use in the hallway, kitchen or home workshop, is stable and takes up little space.

Due to lack of space in the apartment on the closet, suitcases, boxes, convolutions that do not adorn the room are often stored. All this can be closed with beautiful curtains. Between the cabinet and the ceiling put racks (versiph or fasten to the cabinet), the horizontal tubes are inserted between them, curtains are moving along the tubes.

The wall shelf of the proposed design (see Figure) will allow you to store envelopes with CDs in a vertical position. The role of sections for envelopes with disks is played by the cord guys, which are simultaneously brackets.

Wooden planks and thick wire are the main parts of this stand (see Figure) designed to store CDs, books, magazines and other items.

From above, the plank is rated at an angle, as shown in the figure, after which the holes are drilled in them and flights from the bent wire are inserted. The planks are bonded between themselves with screws, bolts or glue.

Standing on the shelf identical folders, boxes with records, slides easily confuse. Cut on all the roots immediately color reproduction and then cut it out, separating each folder. The change in their order will be immediately discovered, and the expressive part will add in the interior.

How to lengthen your desktop or workbench? One of the solutions is to build the table lid. To do this, in the end of the lid, the deaf holes are drilled and wooden pins are driven into them. The same holes are drilled in the console, which is cut out of a durable board or glue from several plywood layers. Then the console is placed on pins.

From a metal or plastic tray and legs from under the old TV or tool, it is not difficult to build a table. In the tray drilled in the corners of the hole, the legs insert into them and screw the nut on top.

Take a look at the drawing - four boards plus a round table top from old furniture - That's all the details for the original coffee tablewho perfectly fits into the most modern interior.

The figure shows the design of a simple suspended shelf, which is easy to make from several shelves arbitrary sizes, kapron cord and aluminum tubes small cross section. Shelves material - chipboard or multilayer plywood with four holes in the corners. Throw through them cord forms a loop into which the tube fixes the shelf.

To lengthen the baby cot, make one back folding. In the daytime, the folded part will serve as a table for drawing.

Make such an area of \u200b\u200ba schoolboy (see drawing) may try even a novice homemade master.

Ironing board To save space, you can attach from the inside of the door of the wall cabinet. The backup and the board itself are attached on the hinges. Inoperatively, she leans up.

A rubber suction cup from the soap, or an old toy, fixed at the point of contacting the door and furniture, will protect the lacquer coating.

Folding furniture in the apartment is very convenient. It makes it easier to clean the room, saves a place.

Someone, let's say, can use a standard spring mattress for this, supplying it with folding legs, and another better suitable wooden Rama With a rubber ribbon grid and an overhead foam mattress. One will install the design in the corner of the room, and it will only be needed flap leg And pin, clogged into the wall. Other - in the center of the wall. And the legs will need two. However, in all cases folded bed It should be attached not directly to the wall, but through the bar, which is nailed to the wall.

One of the boxes of your written table It is possible to re-equip under the cassette-nitsu, in which small things, various parts and devices will be arranged. At the same time, the box itself is not subject to any refinement, and the cassette can be quickly disassembled. The cassette-nice sections form a strip with slots, the depth of which should be equal to half the height of the plank, and the width is its thickness.

Crossing furniture - work requiring great physical efforts. We offer several ways that will not only facilitate this work, but also get rid of the floor from scratches.

Under the legs, put polyethylene covers from cans.

Cut the four mug of raw potatoes with a thickness of 30-40 mm and a diameter of two times more than the footage. In the slices, cut the sockets for the legs and put potatoes under the legs.

Put under the legs a thick woolen rug. In this way, it is convenient to overcome the thresholds: one person pulls the rug, the other pushes the closet.

Packages from the milk under the legs under the legs, they are covered with paraffin and slide along the floor.

Floor grasp wet soap or covered with a bold wax layer.

To move a heavy item, such as a cabinet with all the contents, you can use an inflatable pillow or car chamber as a jack.

A plastic pad is placed to the leg will not fly when the furniture movements, if you place the screw without a head between the leg and lining.

Get rid of the noise of moving furniture quite simple: you need to strengthen the shock absorbers (tubes from bubbles for penicillin) on the legs of furniture).

The cropped edge of the carpet does not necessarily be sewn. Enough on the opposite direction to apply a layer of nitroceing for the skin with a width of about 1 cm.

The small rug in the bed on the grasp semi is unsafe. To the rug does not slip, sushride a few pieces of rubber to it.

When cleaning with a vacuum cleaner of synthetic carpets due to static charge with them, small dusts are difficult to be removed. We recommend before cleaning to handle the carpet to the antistatic agent.

The edges of the carpet lying on the floor are bend and wear out prematurely. If with back side The carpet along the entire length of the edge glue the BF-6 glue with a dense braid with a width of 20 mm, this will extend the service life of the carpet.

The carpet plots between loops or rings inevitably sag and the drawing of the carpet is distorted. It is much better and easier to walk with the inside the upper edge of the carpet of a durable kapron thread equal (30-50 mm) stitches, and then skipping the segment of steel wire into these stitches, throw the wire on the nails, driven in a straight line into the wall. The load on the nails will be distributed evenly, and the carpet will hang without a single wrinkle.

Corners of the mat with time bend upside down, asster entrance door. Insert into the corners of the mat one by one long nail (12-15 cm), as shown in the figure, and it will always fit tightly to the floor.

If the chair or the table is low for you, they can be lifted, adjusting the legs wooden planksbonded screws. Chair and table fully retain their stability. The figure shows two methods: one for both wooden and metal furniture, the other is only for wood. The metal legs of the chairs can be increasing, having bought metal tubes and inserting them into the legs (or put on them).
Measure the length of the tube, the tube is cut, put on the leg and fastened with screws. The exact dimensions are not given here, they depend on the type of furniture, the diameter of the legs, etc. It is not recommended to lengthen the legs much, otherwise the furniture will become less stable.

Material

A. Corpus - plywood 9 mm.
B. Planks - a massive tree, the size of the planks corresponds to the size of the case, 4 pcs.

Operating procedure

1. Remove the sizes of the legs.
2. Cut the phaneer as shown in the figure.
3. Make the leg lengthening.
4. Cut the strips in the size of the elongation.
5. Process emery paper And paint.

→ Right leg

Instructing the legs of the chair is not such a simple task, as it may seem at first glance. Detail of chair detail. Various styles of furniture correspond to a variety of shapes of the legs. In the style of Baroque - twisted columns or volitions, Rococo offers legs in the form of whimsally curved convertible, and in classicism strict straight legs are rectangular or round in the cross section of the column. When making a chair or chairs, it is important to correctly cut the legs. Tree - the material is not homogeneous and it is necessary to cut the leg in such a way that the one-time layers would pass strictly vertically, otherwise the marriage of "Kosala" is formed and in this place the leg will surely break. Repairing such a leg of the chair is useless, it will break again and again. Such item can only be replaced by a new, correctly made.

Antique chairs, like any other wood furniture prone to deformation. As a result of natural warning, the geometry of the subject changes. The legs change the shape, one of them bends, becomes shorter. The chair begins to stagger and, eliminating this defect, the unfortunate chaul is pushing one of the legs. Not a specialist to make exactly the first attempt turns out rarely. The second and all subsequent attempts, align the chair by the method of feeding the legs lead to a decrease in the overall height of the stool.

Next reason to reduce the height of the legs of the chairs is a breakdown of wheels. Furniture for the seating of the first and second rococo period was performed using bronze cups. The cup was put on the leg together with a bronze, ebonite or wooden wheel attached to it. It was considered particularly chic to move the furniture on the front legs with the wheels, raising her back. Sometimes on a chair or chair, the wheels were made only on the front legs. So soft furniture It was more stable. The wheels broke, they were filmed, and for alignment, the legs of the chair were driven by waving under the front legs without wheels. Chair or chair became low.

Whatever the leg of the chair is necessary: \u200b\u200bthe tree bar, suitable size of the wood of wood, from which the chair itself, adhesive, preferably joinery, a set of tools for wood thread, drill with a tree drill, wood drill, vehicles, stools and varnish.

The tree bar of the suitable shape is glued to the extensive leg. Tree fibers must go strictly vertically relative to the floor. The junction is enhanced by a solid tree. As a rule beech. After drying the glue using manual cutters, the wood form is given. The adhesive compound must be strengthened, that is, make it more durable.