DIY coffee table from old furniture. DIY wood coffee table. Do-it-yourself log table

The coffee table was an essential attribute of Soviet upholstered furniture sets. According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, and the coffee table is still in demand. Of course, you can use it not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for needlework and other necessary trifles. He will successfully play the role of a bedside table or a stand for flowerpots or a vase of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern furniture stores are ready to offer many options for such tables, but real craftsmen can create their own exclusive version. This is also a way to save money, and sometimes an opportunity to extend the life of some things if you make it from improvised materials. In the article, we will consider how to make a coffee table with your own hands and what you need for this.

The simplest and most familiar material for the manufacture of this element of the interior, of course, is wood. In addition, wood is perhaps the most affordable and easy-to-work material. With the tools that every self-respecting man has in his arsenal, any board can become a coffee table.

Wooden coffee table - timeless classic

In order to make such a table-bench with your own hands, you will need the following materials (all dimensions are given in cm) and tools:

boards 2.5 × 7.5 (3 pcs.);
boards 2.5 × 10 (1 pc.);
boards 2.5x5 (8 pcs.);
legs of the required length (4 pieces), fastenings for them;
screws - 3.5;
self-tapping screws - 3;
finishing nails - 3.75;
glue for carpentry;
putty, paint, primer;
sandpaper;
saw;
drill;
a pair of short and long clips;
roulette;
hammer;
Kreg Jig for Hidden Holes;
grinder.

Everything is prepared, then let's start manufacturing:

The ends of two boards 2.5 × 7.5 sawn along the length of the table must be cut at an angle of 45º. And cut the boards 2.5x5 with a length equal to the length of the previous boards along the internal saw cut.

Place the blanks, aligning their edges, and measure the width of the table. Next, you need to cut out two parts equal to the desired width from a 2.5 × 10 board. Fasten with screws to each board.

Make hidden holes from the ends of the crossbeams. Later, they will help to fasten the products with the sides.
Fasten the side boards with joiner clamps, aligning the ends, and screw into the drilled countersunk holes.

The next details - cut the end boards 2.5 × 7.5 carefully, you may need to adjust the blanks, so make them a little longer, and then gradually grind off the excess. Glue the finished ends with wood glue and tighten with a belt until dry.

Carefully sand the surface of the finished product. In the joints of the boards, if necessary, apply putty, let it dry and sand again.
Apply paint or stain and varnish (whichever you prefer).

Screw on the leg mounts and screw on the legs themselves.

A handmade wooden coffee table is ready to delight you with its versatility. It can be used both as a table and as a bench.

Wooden coffee tables can also be round. Let's figure out how to make such a round coffee table with your own hands. For its manufacture, you will definitely need:

boards;
screws;
wood glue;
protective agent for wooden products;
paint, stain, varnish;
drill;
jigsaw;
level;
roulette;
Miter saw;
clamps.

You can make a drawing for a coffee table yourself, there is nothing complicated about it. When the diagram with the dimensions that you need is ready, you can get to work.

Action plan:

First, make a support. Here you need to act as your imagination and skill level suggest. It should turn out approximately as in the picture. To fasten the parts of the support, it is best to drill hidden holes with a Kreg Jig, secure with screws and close the holes with plugs.

The support must be sanded, then treated with a protective agent and painted or stained.
To make the tabletop of such a coffee table with your own hands, the boards should be sawn into parts equal to its diameter. Lay out, aligning the edges and surface (here you can not do without a level). Glue with glue and fix the structure with clamps until dry.

From the resulting square blank, using a special curvilinear cutting machine, you can cut a perfectly round tabletop. Such equipment is unlikely to be found in a simple carpenter; a company specializing in the manufacture of furniture can help here. If you decide to do this operation yourself, you will have to try. First, draw a circle of the required diameter on the workpiece. Then fix the circular cut guide with a nail in the center of the marked circle and cut.
The tabletop, like the base, should be carefully sanded, especially its edge, then treated with an antiseptic and painted (varnished).

If you wish, you can use stencils to apply a drawing, for example, a dial, as in the photo, or maybe something else. Everything depends on fantasy. Such a homemade table will decorate any interior, even the most sophisticated.

Pallet coffee table

Building pallets are a very versatile building material. Of these, if desired, you can make a lot of useful, comfortable, and most importantly, exclusive pieces of furniture.

Do-it-yourself pallet coffee table - just quickly unforgettable

If you have already been thinking about how to make a coffee table from construction pallets with your own hands, we will help them come true. To do this, we need the actual pallets and the usual set of tools and materials for working with wood products, namely:

hacksaw or jigsaw;
grinder or sandpaper;
drill;
screws;
antiseptic for wood;
paint, stain, varnish (at your discretion).

Operating procedure:

To make a table out of pallets, first choose the right material. Choose your pallets carefully. There should be no large knots on the boards, as well as mold and signs of destruction. It is best to disassemble the pallet into planks before starting work. Clean each of them, then saw off the necessary part, sand and cover with an antiseptic. You can immediately paint it, it will be much more convenient, because it will be impossible to get into some places when assembled. Then twist the required structure with screws and varnish at the end.

It is best to make such a table on wheels. To do this, you can use furniture wheels, and preferably wheels for trolleys. The latter are more reliable, and their appearance is more suitable.
Another option is to make small legs for such a table from small bars, and the surface of the table can be covered with durable glass of the right size.

Your do-it-yourself pallet table is ready. As it turned out, you can create an exceptional thing by spending very little time, and most importantly, money. But building pallets are not the only material at hand from which you can make a small coffee table. Not bad with this task will cope, for example, standard wooden boxes.

Such a handmade coffee table will serve you faithfully for a long time, if you take the issue of its creation seriously, despite all its seeming simplicity.
It can be advised to make a table from a log or a picturesque stump, for example. It will decorate the interior in country style. It can be on wheels and have a countertop of an unusual shape made of durable glass.

Folding coffee table how to make

We all want to save more free space in the apartment. An abundance of furniture that clutters up all the free space has long been discouraged. However, little furniture is also not the ultimate dream. There is only one way out - interior items that easily perform several functions. This is the transformer table. When folded, it is small in size and plays the role of a cabinet or coffee table, and when disassembled it is a full-fledged dining table that will help you receive guests or arrange a family dinner. How to make such a transformer with your own hands?

Computer programs will help create drawings of such a table. With their help, you can calculate all the nuances.

The best material for creating a transformer is laminated chipboard.

Responsibly approach the purchase of the necessary accessories. The durability of the mechanism, and, consequently, the table as a whole, depends on it. Folding table mechanisms can be purchased at the store.

Thus, when unfolded, this table is very stable and can easily become a dining table.

100 examples of coffee tables

Now you know that a small coffee table can be easily made by yourself. According to your desire, it will be folding or not collapsible, on legs or on wheels, in the color of wood or painted. Imagine, try, and your interior will be unforgettable for little money.

It would seem, how can a coffee table surprise a modern person? A long-forgotten item in many apartments can no longer be found. A modern person loves space, remembering that they often stumble over a bulky table, here and there newspapers and unsolved crossword puzzles are lying around. What now? It turns out that coffee tables not only have not lost their relevance, but have also become an ultra-modern piece of decor, craftsmen make masterpieces with their own hands. And yes, there are even annual exhibitions dedicated only to this type of furniture.

Read in the article

Yes, what is it like today, a modern coffee table that has survived more than one generation of Russians. The answer is not so simple at all. The only thing that sometimes unites this name is only a collective phenomenon, relating to a certain type of furniture with quite understandable tasks. The rest is a problem.

Sometimes it seems that a person is slightly distraught and drags all sorts of rubbish home. And no…. This is also a piece of furniture art.

It would seem that there is no rational grain in this chaos. But no! It turns out that each of these samples must meet both aesthetic standards and correspond to a certain functionality.

Indeed, for factory products there is a whole list of norms and specifications. For example, they must be stable and safe. Forms - "perfect, providing usability." And the materials should be simple and environmentally friendly. In fact, a coffee table is one of the simplest designs. With this, looking at some amazingly simple and elegant masterpieces, you can’t argue.

Simple, but how elegant! Another recommendation that furniture makers talk about is that the coffee table should be assembled and disassembled. More complex models may have pull-out cabinets, for example, like this. And although some of them are slightly non-standard, such a table will definitely attract the attention of guests.

Another requirement is the accuracy and cleanliness of assembly and fitting of elements. Here again questions arise. And if the table was practically not processed. How to be in these cases?

You will be surprised, but each table that left the factory has a long history of creation. From a simple sketch to a whole pile of papers. All details must be unified. That is why in Soviet times, factory tables created such a dull impression.

And it's great that today there are enough art workshops, videos and other ways to share information and knowledge in order to try to spy on really interesting projects to create such small works of art.

The main thing to remember is that the coffee table really needs to be stable and safe. And even the same as in the photo.

How to prepare do-it-yourself drawings with dimensions for a coffee table

Drawings are the most important part of working on your own table project. Here it is important to choose the golden mean between functionality and originality. You can take ready-made drawings as a basis, and there are a huge number of them today, and already in the process of work, modernize it. Variants of schemes that may come in handy during work.

And here is how a seemingly ordinary, at first glance, table can be turned into a small front garden. The main thing is to imagine in advance what your table will be, and the decision will arise by itself.

Advice! To build your own drawing, prepare a piece of paper, a pencil and a tape measure. With a centimeter, you need to measure the area of \u200b\u200bthe space where you plan to put your creation. Based on the data obtained, prepare a drawing.

A schematic drawing is the basis for further work on the creation of furniture. The drawing will help you choose the right basis for the structure, calculate the load on the frame, prepare the required number of corners, screws or clamps, as well as supports or legs on wheels. Do not forget that in the drawings, in addition to the dimensions of other materials, the thickness of the countertop is indicated.

What materials can a coffee table be made from?

A coffee table is most often made from one or two types of materials. Usually it is both metal and glass. However, there are hundreds of solutions to imagine what your dream could be and what it could look like.

The most important thing here is to think over all the elements in advance. Sometimes you have to work with each of them separately. Plastic, glass, metal - all this can become an important part of your art object.

table top

How to make a coffee table from chipboard

To make a simple table, you need to purchase sheets of chipboard. For work we need. In general, the work process resembles the previous instruction, with the only difference being that in the case of sheets, they are attached to the corners.

Advice! If you do not have a jigsaw, then cutting work can be done right in the store. To do this, you just need to name the dimensions of the blanks.

Shelves can be fixed on confirmations. To screw them in, we pre-drill holes with a 4.5 mm drill. If you have questions about the best way to make a coffee table, you can watch this tutorial video.

We make a glass table with our own hands

A glass table will make yours light and airy. Very often, such a technique is resorted to in small rooms so that this piece of furniture does not clutter up the space. In some cases, tabletop painting is allowed.

Particular attention should be paid to the quality of glass fasteners. To do this, there are special fixing systems that prevent damage to it.

Making your own coffee table from improvised materials

Despite the abundance of ready-made solutions, in our country, the use of unnecessary things for solving quite mundane tasks has always been considered a favorite pastime. Some crafters share ways to use unexpected materials to create furniture.

Tire table

Tire products are especially popular - they are convenient to install in summer cottages and. Here are some options for such non-standard furniture.

Some masters manage to hide the presence of a junk item with the help of simple, but very effective tricks.

Table-suitcase

Very often, an ordinary travel suitcase is used as the basis for a coffee table.

The main task is to ensure reliable fastening to the base. By itself, such a table will differ considerable functionality.

Such tables practically do not require additional processing, and fastenings to the base are very versatile. They can be mounted on a wooden base, tightened with straps to a metal frame.

How to make a coffee table with additional elements with your own hands

And now consider the order of assembly of a simple table. This master class is quite simple to implement and does not require special skills.

Table on wheels

So, today we will analyze how on wheels from old wooden boxes for vegetables or pallets.

Illustration	Action Description
	According to tradition, we will prepare the tools and necessary materials for work.
	We begin the assembly of the base, for this we lay out four boards in parallel, fix them with perpendicular segments of the boards.
	We fasten all the elements with nails.
	We fasten the connecting elements that form the frame of the pallet.
	We fasten the top of our pallet. Now it's time to move on to decorating.
	For coloring, you can choose any color that is close to the desired range.
	From suede or leather we prepare an element for fasteners. The material must be strong enough not to tear.
	We braid a pigtail. And fix it with screws.
	This is how our coffee table turned out.

Table with drawers

Drawer design is considered one of the most difficult for beginners to perform. Take a closer look at how diverse the options for retractable systems can be.

Many things can be done by hand. It is difficult in most cases, only at first glance. The new review has collected examples of unique and amazing coffee tables that craftsmen have made with their own hands.

1. Old suitcase

Old suitcases are real finds for designers and out-of-the-box thinkers. Through simple manipulations, suitcases turn into unique furniture and decor items. For example, you can turn an unnecessary suitcase into an original coffee table by simply screwing the legs to it. Such a table will add charm to both a bachelor's apartment and a family living room decorated in a classic style.

2. Boards

Instead of going to the furniture store and buying a finished product, get creative and go to the hardware store for wooden blocks and metal legs. Next, you should connect the boards to each other and screw the boards to them. A handmade table is a unique and versatile thing, as wooden furniture fits perfectly into any interior.

3. Battery

Got new batteries? However, do not rush to throw away the old cast iron radiator. Buy a piece of glass and turn an old battery into an original coffee table that you definitely won't see in the store or your friends.

4. Framed window

An old framed window is a wonderful material for creating a charming living room coffee table. Screw the legs wrapped with coarse ropes to the frame and decorate the surface of the table with beads and shells.

5. Logs

A stunning low table can be made from small logs. First you need to assemble the base of the table from plywood, glue wooden bars around the perimeter, and close the middle with a plywood lid. Next, you need to glue thin wooden saw cuts on the plywood cover so that it seems as if the table is made entirely of logs, screw the legs and carefully cover all the cracks.

6. Wooden cuts

Large wooden saw cuts are an amazing material for creating a beautiful and original table that will become a real highlight of the living room and will last for many years. Making such a table is easy. It is necessary to carefully process the wood and fasten the two saw cuts together, glue a wide wooden leg bar in the center and open the surface with varnish.

7. Pallet

Wooden pallets are an excellent material for creating a wide variety of furniture: sofas, beds, chairs and of course tables. First, you should get a pallet, carefully clean it and paint it in the desired color. There is nothing left to do - screw the legs and put the glass tabletop on top.

8. Wire reel

A large wooden reel for wires is a practical ready-made coffee table. Of course, getting it is not so easy, but if you are lucky, you know what to do with it.

9. Tire

There are many ideas for creating original furniture from waste car tires. For example, you can make a charming table out of a tire, a piece of plywood, a few pieces of wood, and coarse rope.

10. Glass

A budget and very original table for a modern living room, to create which you will need square-shaped glass and low castor legs.

11. Glass and books

The original idea of recycling unwanted books. Of course, this is not about fiction and the works of the classics, but about old textbooks that are gathering dust on the shelves. In addition to books, you will also need a small piece of glass and a frame. Insert the glass into a pre-painted frame and attach the finished structure to the book columns.

12. Chest

Wooden table and bowl.

Sometimes, even a broken trough can do a good job. For example, it is useful for creating a coffee table. In addition to a metal bowl that acts as a leg, you will also need a round countertop made of chipboard or wood.

15. Old table

An old coffee table can be an excellent material for creating a new table. You just need to paint the legs and cover the table with a fabric of the desired color.

An essential attribute of every home is a coffee table. At first glance, it may not seem like the most necessary furniture, the purchase of which is postponed for a long time.

But it is precisely such interior items that make it truly cozy and comfortable. On the coffee table you can place all the things you need that should be at hand: books, remotes, keys and other small items.

DIY wood coffee table

If you still have not been able to find the option that suits you or have difficulties with the design, we will share with you ideas that will tell you how to make a coffee table with your own hands.

A wooden coffee table will fit perfectly into almost any style of interior.

Wooden coffee table

Wood is especially popular among the many different materials from which furniture is made. If you properly care for wooden furniture, it will serve you for a very long time. In addition, working independently, you can create a unique piece of furniture.

To make a wooden coffee table yourself, you will need to prepare all the necessary materials and tools. You can put the finished structure directly on the floor or additionally make four legs on which your table will be located.

An example of how you can make a coffee table with your own hands from wooden pallets

By using multiple drawers, you can also make great living room coffee tables. Four large drawers fastened together form a stylish side table. There is usually a gap in the middle of the boxes, which can be decorated with various items.

Wooden crate living room table

Photo: do-it-yourself coffee table

A coffee table made of wooden boxes is a great place to store all the necessary things.

DIY rectangular coffee table

Modern look

You can also make a side table that looks modern and stylish. But before choosing a specific design for the table, determine the overall composition of the objects in the room. It is important to observe a single style in every item that is used indoors.

Stylish wooden table with metal legs

Pay attention to the retro style, which is also very popular today.

A real work of art - an elegant low coffee table made of wood

Effective design move - furniture duet in the living room

Coffee table decoration

You can turn a coffee table into a stylish and up-to-date piece of furniture with the help of decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.

Use textiles to decorate a coffee table to give it originality

Think about your mood. After a long working day, you want to return to the atmosphere of calmness, comfort and coziness. Therefore, for table decor, it is better to select such elements that fit perfectly into the overall interior of the apartment and do not disturb the harmony.

Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room

Materials and items that can be used more than once

A wooden pallet is a versatile item from which you can make anything with your own hands. Perhaps the easiest way to build a coffee table, since the pallet is, in fact, a finished worktop. It can be painted in any color, apply a pattern, symbol or ornament. The legs can be wheels or wooden blocks.

Turn a wooden pallet into practical designer furniture

Table design options depend only on your skills, preferences and, of course, the interior of the room.

A glass top can set the tone for the entire interior.

Suitcases and old radiators

Your old suitcase can become an integral part of the interior of the apartment. To make a table out of it, it is enough to attach four legs. A coffee table made from a battery will also look unusual and original.

DIY coffee table from an old suitcase

Wooden coffee table on wheels in the interior

Do not be afraid to experiment and create a fun atmosphere in your home

Cozy reading nook with a round coffee table that can hold a large number of your favorite books

As in a bedroom without a bed, so in almost any other room, whether it be a living room, a kitchen or even a hallway, you cannot do without a table. Actually, in the bedroom, he will not be superfluous. And it is better to have several of them at once - for different purposes. So that there is somewhere to put a night lamp, where to lay out notes and books, install a laptop, or even just have a bite to eat or even do something more spicy.

Buying a "desk" is not difficult, the choice is now large, but making it yourself is a matter of special sophistication. Such a home-made item of an apartment “wardrobe” will be valued much higher by both the owner and guests, and it will be more pleasant to use it.

This is not an easy task, but it is also simple, requiring, however, a certain aesthetic taste and carpentry skills. But do not be afraid and immediately retreat. It is quite possible to cope with this task, the main thing is to imagine what you want.

Pros and cons

A homemade product has both its advantages and disadvantages. Among the advantages:

Variability. You can do with your own hands what you really need. In all aspects. This is complete freedom in the choice of form, material, texture, size, design.
Saving. Buying in furniture stores will cost significantly more. In fact, for the same or even worse quality, you will sometimes have to pay many times more money.
Uniqueness. What is done by hand, no one else will do. This will allow you to create a stylish and original, and most importantly, a unique interior almost anywhere - in the country, in an apartment, in your own house.
Improving skills. Working on a table is an opportunity to practice your locksmith and carpentry skills, to learn a whole range of new things. These skills will come in handy when repairing finished store products in the future.

Having better understood the design of the tables, it will be possible to more professionally approach the choice of such products in retail outlets, or even discover a source of additional income. And in general - it will always be possible to help relatives and friends fix something, bring a fresh idea to the design.

However, the independent production of tables is fraught with certain difficulties. Among them:

Time consumption. Be prepared to spend one or more days working, and in the case of a large item, even a week. The maximum, as the masters admit, is 10 days spent on a large table. In fact, you can spend the whole vacation tormented with the material and achieve very meager results. Therefore, it is better to have a psychological readiness for difficulties during the first experience.

Injury hazard. Working, especially with wood, is fraught with splinters. When working with old material (beams, boards from fences), you need to be extremely careful. But in some cases, even work gloves may not save you from small cuts. Too delicate hands are better not to do such things.

Manufacturing defects. The house is still not a workshop, and it can be difficult to make some calculations - hence the roughness and unevenness on a product that seems to be ready and verified to the smallest detail. Well, if the table is made for giving, but in a standardized room the result can become the subject of offensive jokes and just look out of place. For the manufacture of an impromptu "bureau" or other structures more complex than an ordinary table, skills and some experience are still needed. It would be time to earn it.

Need a tool. If it is not there, everything is simple - you have to buy and master it. Time is already money, and there are additional costs at the first stage. However, in the long run, such an approach will lead to savings - the next table will be made almost for next to nothing, especially if there are stocks of material in the country.

Not suitable for all styles. You need to be careful experimenting with homemade products in modern interiors, for example, high-tech, where metal and technological materials “rule the ball”. It is difficult to work with them, and wooden products can disrupt the harmony of the room.

A little advice. If you decide to make a table, and this is the first experience, try to find a good adviser who will psychologically and with the help of his skills support the undertaking. You can take the first steps together, and then go on a free “flight”.

Assembly features

There are many types of tables. The most common are writing, computer, toilet (with or without a mirror). Desktops differ depending on whether they are designed for a laptop or made for a desktop computer. In the latter case, you will need a special space for the system unit - it can be installed both under your feet and at eye level.

Each of the options has its own advantages that affect the design of the table. In the first case, the system unit will not get in the way at hand, but it will not be very convenient to connect USB ports to it from behind. When designing, you should leave a significant open space behind the table, do not put it near the wall. If the system unit is located on top, the bureau should be as stable as possible, and the table top should be made of durable, reliable material.

If there is a goal to design a desktop for a student, including a collapsible structure, it is reasonable to build drawers for notebooks, textbooks and CDs into it. An alternative is a separate shelf above the structure. Drawers can be either drawers or open shelves. The backlight is up-to-date.

Tables can also be angular, transformers; height-adjustable, collapsible, on wheels.

All these are not frills, but practical design elements. Among the more complex options, for example, river tables with a beautiful, often transparent material built into the middle part are popular. Their production will take more time and will require higher locksmith skills, however, it will allow not only to upgrade your working “skills”, but also to make a real interior artifact. Each of the types of tables has its own assembly features and specifics. Consider some of the most popular, simple and affordable options for creating a table that do not require the heights of technical training, but allow you to create high-quality and interesting products that do not look awkward or poor even in a modest interior.

Tools

But before you start carpentry manipulations, you need to decide what and with what you plan to work. You need to get down to business in full "instrumental" readiness. Do not be afraid, nothing rare and particularly complex will be required - only the usual working arsenal, which is always at hand for a real man. So, let's list the main ones. You can’t do without the “classics of the genre” - nails, screws, a screwdriver, a planer, a hammer, glue (instantaneous is also useful), a knife. In some cases, you can use a saw (in nature). Do not forget about work gloves and disinfectants. Be sure to have iodine and cotton swabs with you, unless, of course, the goal is to make a table, and not to get sick with tetanus.

The fact is that when sanding wood (with sandpaper or other device) it can turn out to be very “unfriendly” and just stand up with a pile. When working with metal, more metalwork tools are needed. And in any case, it is better to get eye protection - a special working mask. For the subsequent processing of the material and its cleaning, a brush and disinfectants, including those against insects, are also useful, especially when using old wood. You can also clean the table with sandpaper.

And, of course, you need varnish or paint for final processing. You may have to varnish the countertop several times (after the first one, the pile will simply stand up), which means that it is better to buy it with a margin.

Popular materials

One tool is obviously not enough. There is something, but nothing to work on yet. The main thing, of course, is the material. Theoretically, a table can be made from anything, but there are subtleties. The most popular is wood, but it must be dry! If it is not dry, dry it; it will take time, but for the sake of the quality of the product, in this case, do not rush anywhere.

A table made of dry wood, logs, timber is a wonderful and reliable element of the interior. Beautiful, functional and affordable. On this option, it will be possible to save a lot if there are inexpensive bars or logs at hand - they are stored, for example, in the country. In stores, good wooden tables definitely do not belong to the category of the cheapest.

Wood is trending right now. This is the main eco-material. You can’t do without it in interiors tailored to the natural style. In fact, it is wood in one form or another that is played up in all classical interior styles, up to colonial or modern.

You can make a bureau from chipboard. The material is composite and quite affordable. But it has a lot of downsides. Chipboard is afraid of moisture - no longer an option for the kitchen. It does not hold nails and screws well - unnecessary difficulties in the work. And in general, it is not very environmentally safe - it is better not to keep too many chipboard products in the apartment. Nevertheless, such a table can be placed, for example, in a house or on a veranda in a country house - as an inexpensive, temporary option - for the season, for receiving guests. Inexpensive, simple and moderately aesthetically pleasing, and most importantly - functional.

Let us clarify that laminated chipboard is also on sale - also wood and shavings, only laminated in a special way - with a polymer film at high temperatures, or even with a special varnish that provides increased water resistance. Chipboard is more expensive, but such boards are practically devoid of all the shortcomings of chipboard.

However, the use of plywood will be no less practical. There are many types of it - there are also moisture resistant ones. This means that the range of applications is wider. In Russia, this material is gaining popularity and is also massively exported, which indirectly indicates its quality. Plywood is quite easy to process and not too expensive. Of the minuses - its facelessness, dull texture and the accompanying feeling of unnaturalness. In addition, when working with plywood, it is necessary to carefully approach the preparatory stage. Without a sketch, a drawing is indispensable. You can use both ready-made projects, and make it yourself.

The easiest way is to make a table from a furniture board, for example, ash. This is a little more expensive, but at the same time it will ensure the reliability of the main part of the table - the table top. Less worries with polishing, but at the same time somewhat less naturalness and texture.

An extreme alternative is the use of natural wood: stumps (by the way, they can be used on their own, but this is already a designer chic) or saw cuts. With them, everything is exactly the opposite. You will have to grind and varnish it yourself several times, but in the end you will get a completely unique unique product that all lovers of “natural” design can appreciate, unless, of course, after gatherings they leave without a few splinters in various places.

Often in the design of the table, glass or special optical glue, plexiglass glue, is used to replace it. You can also buy just impact-resistant glass - although it will come out more expensive. It's stylish, effective and safe. This material is optimal for small oval coffee tables, but recently it has been increasingly used by designers in models with right angles.

We also add that the legs and base can be metal. You should not be afraid of the combination of wood and metal - with a competent design, it can be not only harmonious, but also very interesting. In modern interiors, loft and hi-tech, sometimes you can’t do without it. In addition, metal is effectively combined with glass or its analogues.

Kitchen table

This is an absolutely necessary element of the interior. It should be comfortable, comfortable and stable. The surface of the tabletop is often of no fundamental importance - usually it is covered with a tablecloth or oilcloth. When making it yourself, it is important to pay attention to the lower parts of the structure so that you can sit at the table without any problems, and you can always place your legs comfortably.

A good DIY dining table can be made in just a few days. According to home "masters", even very beautiful large models took them no more than 7-10 days. Any material can be used - the easiest way to work with chipboard, plywood and wood. The main thing is that the beams and boards are even and well sanded.

Carefully study their dimensions, bring them to the norm if necessary - it is hardly advisable to make a kitchen table more than 80 cm in height. The shape and size of the countertop will depend on the interior and the availability of free space in the kitchen.

The table, although the main element of the interior in such a room, should not occupy the entire place. Therefore, especially in small kitchens, it is practical to make it square - you can approach it from all sides, and more than four people behind it are still unlikely to fit. In large dining rooms, on the contrary, it is better to stay in the classic rectangular format.

An oval or round tabletop will also look interesting, especially if you choose beautiful curly legs for it - this, however, will require good carpentry skills.

When working on a standard wood model, fasten the beams or boards with the planks at the bottom under the tabletop. A practical option with plywood. It is better not to use chipboard - there is always high humidity in the kitchen, and something is accidentally spilled regularly, and this material, as you know, does not withstand the influence of the water element.

An interesting idea would be to create a sliding table. In this case, the fasteners must be flexible. But you can do it easier. Still, making a sliding table in the format of one design with your own hands is not a trivial task.

Therefore, make two small rectangular products of the same dimensions. During the day, they can be moved to different parts of the kitchen or even an apartment, and moved before eating together, thereby forming a large table. A very practical option for small kitchens. When manufacturing, pay attention to the lower parts - partitions and beams should not interfere with each other when connecting tables.

If the kitchen is very small, you can make a folding table. Assemble the countertop and attach a special bracket to the wall. Such a “desk”, as a rule, has only two legs, which means that they should be placed so that at least three people can fit behind it at the same time. Another option is to build a small cabinet for storing dishes and food instead of one of the legs. This is the perfect way to save space.

When designing a table with a sink, it is better to seek the help of a professional. It will not be difficult to make sketches and the main structural elements, but the main thing is that they do not interfere with the passage of pipes under it. So you can't do without a locksmith and a plumber.

At the final stage, it is better to process any table. How to cover it and how to decorate it is a matter of taste. It can be varnished and covered with a tablecloth, or even trimmed with special tiles or even stone. The field for experiments is large.

Many color palettes, including bright ones, will fit into the interior of the kitchen. Do not be afraid to make the table red, yellow or green - it is fashionable, pleasant and aesthetically pleasing, it will create a good mood when cooking, eating and communicating with household members and guests.

And one more tip for kitchen tables. If you want to design a product with a drawer, make the design of the latter as reliable and airtight as possible so that moisture does not get there. Assemble it from several boards or planks and securely fasten them with special glue or nails. When using plywood, it should ideally not be thicker than 20mm.

High-quality grinding and processing is important, including against insects. Remember that the kitchen, as a place to store food and prepare food, is a favorite environment not only for cockroaches, but also for various arboreal and moisture-loving insect species, especially in hot climates.

For computer

The table for the computer should be compact and functional. It is always better to design it with a margin. There are two main concepts:

Table for desktop computer. If the technique is powerful, for example, gaming, you will have to make the table long and wide enough. A monitor will take up a lot of space on it. A diagonal of 20 inches and wide screen rotation means the user is mobile at the table, which means that there should always be a place to put your hands. A separate measurement should be made taking into account the dimensions of the keyboard.

Other devices should also be placed on the table - a mouse, joysticks, gamepads, or even a game role. Part of the space will be occupied by the system unit. It can be installed at the bottom of the table - for this you will have to make special ceilings so as not to put the equipment on the floor. The table should not be closed - high-quality cooling is very important for a powerful computer, and open space will provide the necessary air circulation.

At the same time, the design of the table is of no fundamental importance - in any case, it will be forced by technology. The main thing is to use high-quality varnish and paint so that the surface is smooth, it is easy to wipe it and it does not accumulate a lot of dust that is dangerous for equipment.

For laptop. When measuring, keep in mind that both the computer itself and the hands of a person working or playing behind it should fit on it. Often, a full-fledged keyboard is also separately connected to portable computers, so it is better to use material with a margin. Leave room for the mouse too.

We add that almost any shape of a computer table can be made. Previously, there was an opinion that it should be rectangular, but practical experience has shown that oval tables, in particular for laptops, are a very interesting solution. If you attach wheels to them, turning them into an analogue of a coffee table, you can easily move with a computer around the room - show videos to friends from convenient angles or, conversely, if necessary, quickly and quickly immerse yourself in work or correspondence away from prying eyes.

However, a table with right angles has some specific advantages. It is easier to equip it with drawers and shelves for storing books and CDs. Do not forget about the reliability of fastening these structures, since the weight of a music or game collection can reach 7-10 kg.

night table

It is better to make a night table extremely compact. Dimensions are not his strong point, the main thing is the convenience of the form. First of all, adjust the dimensions of the materials to the height of the bed. It is better to make it flush with the level of the mattress, but it's okay if it gets lower. A tall night table is not too impractical, although it is found as an example in some design schools. If aesthetic qualities are more important to you, it is reasonable to experiment in this direction. In this case, you can choose any shape - from oval to rectangular and square.

The design concept should be included in the composition of the bedroom interior. For classic styles of materials, it is better to choose wood. Moreover, in the case of retro and historical styles, the more authentic it is, the better. If you have skills in artistic carving, then in this case it's time to use them. In modern interiors, a wooden product will also be relevant - if necessary, the texture will be hidden under varnish, paint or a tablecloth. The color scheme depends on the color of the room. The color should be in harmony with the bed, linens, and ideally with the floor and ceiling. Radical contrasts are out of place here.

Particular attention when working on a night table should be given to its stability. The leg can be made big. If there are several of them, they should turn out to be absolutely identical. Please note that not only an alarm clock or a table book is placed on the night table, but sometimes they rely on their hands - it should withstand such loads without problems. The table can also be equipped with several drawers, or, if the level of technical skill or the specifics of the material does not allow, with an open shelf.

Coffee table

In many houses and apartments, the habit of laying out newspapers and magazines on the coffee table has already become a thing of the past. They were replaced by new means of communication - various gadgets - from iPhones to laptops. But they also need to be placed somewhere, even if just put on charge. Before making such an interior item, it is better to immediately determine its functionality.

The main thing is to learn one simple truth: no one works for magazine "bureaus" - at best, they earn extra money, so they should be low, aesthetic and comfortable for a relaxed pastime. And it is aesthetics that come first. Your guests will remember, first of all, the design and material of the table. Another point is functionality. It is good if such a table has a space under the tabletop where you can put something.

So, as materials it is better to take chipboard or boards. They should be collected on dowels with the utmost, maximum accuracy - so that the junctions of the elements are not visible.

An additional crossbar will make the table more stable and reliable. If the design incorporates metal (legs), a welding machine will be required. A rectangular metal element can be placed in the base. Do not forget to strengthen the sidewalls in the same way. A very common option with glass (or transparent glue). Such tables are often found in offices, waiting rooms and other "guest" facilities. However, as the experience of many designers shows, it fits well into home interiors.

When manufacturing, it is important to pay attention to a wooden or metal base - it will be visible under glass! Cruciform shapes work well. Do not forget that glass can also be used simply as an additional component. For example, close them part of a classic wooden table. It is advisable to equip the resulting already light object of the interior with wheels. Such a “mini-transport” will be especially relevant in a large living room, as well as in an apartment where there are always a lot of children (then, however, you should not experiment with glass once again). It is a good and useful item for fun and leisure.

But the mobile table should be light. Massive - it is better not to equip with this “bonus”, but to make it from durable heavy overall boards. It will ground the interior, make it more collected.

There is also an option with a table-transformer. It is practical, but not always aesthetic. However, if you make a double (in height) base, then it can even be used as a conditional easel. We add that coffee tables, as a rule, are still small and are usually designed for one, maximum, four people. Sizing is purely personal. Only the height is fundamental - it can vary from 40 to 60-80 cm. Do not forget also that in some situations the product can also be used as a bookcase in combination - for this you will need to make shelves and compartments that meet your needs.

With regard to the color scheme, let's say the contrast of the table top and legs. The combination of metal and wood looks good. You can draw a picture on the surface or make an unusual ornament, but it’s easier to just cover it with something - you don’t have to repaint the products every time you change your mood and taste. And one more thing - about the form. Magazine furniture can be both round and rectangular-square - a matter of taste. Round products are used more often because they are safer and more democratic.

The knights of King Arthur, after all, also sat at the round table, so in the living room, the place of reception and gathering of guests, each of whom often wants to show their individuality and initiative, it is better to do without seats at the head of the table and other patriarchal delights, and for children are safer - once again they will not hit.

Summer cottage furniture

A holiday in nature is a wonderful pastime, however, in order to really have a good rest and sit in a company, you need a high-quality and comfortable table. Such furniture is very specific. On the one hand, it must withstand high humidity - if it stands outdoors in the rain, on the other hand, it is very unpretentious in terms of aesthetic qualities and always gravitates towards naturalness. In nature, a glass table or an expensive metal product will be inappropriate.

So, before you start making such furniture, you need to decide on an important point: where it will stand and how mobile it should be. Basically there are two options:

Fixed outdoor table. Typically, such structures are placed near the garden house or away from it in comfortable places to relax - under an apple tree or other fruit tree. The main thing is that such an exterior item be durable and reliable, stand on its “legs” as firmly as possible. It is reasonable in some cases to even dig the legs into the ground. The surface can be anything, but preferably wood.

The main thing is to remove pile and shavings from it, as they can lead to unpleasant and deep injuries or just a splinter. Please note that the surface must be moisture resistant - the table will regularly get wet in the rain. In cases of heavy rainfall or just a long absence in the country, it is better to cover it with something, say, oilcloth. This will not save you from high humidity, but it will protect you from direct contact with water.

Movable table in the country house. As a rule, this is a more compact option. It can be used indoors, taken out to the veranda or outdoors. The main emphasis in self-manufacturing is best done on the use of lightweight materials so that it can be carried.

Wheels are unlikely to help much (the landscape in the country is not always even), although they can also be attached, but this will make the structure less stable. A good bonus would be the ability to push or assemble the table. For the winter season, such a table can be completely folded and put away in the attic so that it does not deteriorate.

What is better to make a table for giving? Pallets, boards, old logs, for example, from an already unnecessary or dilapidated fence, partitions from boxes, an old tire, or whatever, can come in handy. It is better not to use glass and not to abuse metal. The latter tends to rust: this is not so scary, but aesthetically it can spoil all natural harmony, unless, of course, there is a desire to create an entourage of a post-apocalypse.

Boards for countertops in the country are best fastened from below with the help of planks. There is another option with gluing - this is a more time-consuming technology, after processing it will be necessary to pull off the boards and keep them in this state for about a day. If the material is old, it is better to arrange it by color, align it stylistically with color.

Light - to light, dark - to dark, with interweaving of color contrasts closer to the center. Don't strive for perfection with constant alignments - naturalness doesn't have to be symmetrical. The next step is to sand the surface. Better to do it with sandpaper.

When working with legs, the main thing is to make them the same length - otherwise there will be little pleasure in eating at such a table. It is important that their surfaces are not beveled, but even. However, if you dig your legs into the ground, and there is no saw at hand, you can always compensate for a couple of centimeters, but only as a last resort.

Then, after designing the design, the countertop must be varnished. After the first time, the pile will probably rise, so we process it twice. For reliability in the lower part at the final stage, you can make an additional support-mount. It will make the structure more stable and allow you to comfortably position your legs.

In continuation of the work, you can also attach benches to the table - make them part of a single structure. It is better to connect the bench to the table with special wooden planks using nails or long hairpins. For reliability, you will also need washers and nuts. The seats themselves are made according to a similar principle, only their height, of course, is lower than the table, and the mounts should be even more reliable - it is better to make cruciform ones.

The final step is painting. Gray, brown, natural tones look good. Bright colors look too eclectic, unless you have a modern country house design, and instead of trees, artificial vegetation.

And a few more words about the size. As a rule, country tables are long, but not too wide - so it is easier and more convenient to approach them. Do not install them too close to bushes, especially thorns, gooseberries or cherries, it will be painful to approach them.

The distance from the fruit trees must also be reasonable, otherwise you can repeat Newton's experiment, but this is unsuccessful. The height of country tables, as a rule, is made average, since both adults and children usually sit at them. So with built-in seats it is better not to overestimate the design.

How to arrange lighting

This question is relevant both for small night tables and for working products on which a computer is installed. You can put a small floor lamp on the night "buro", it is reasonable to stretch the wire with the switch to the bed so that each time they do not reach for the table and do not drop the lamp in the dark. On a desktop, it makes sense to use a table lamp as well, but as we experiment with homemade designs, other more interesting possibilities emerge.

If you make a small “add-on” above the table from several panels - plywood and chipboard, securely attach them with nails, then under them you can install an ordinary light bulb, or better, an LED. It will be more efficient to use two or three small spot LEDs. They will provide high-quality and uniform lighting.

A child who studies at the table, and an adult in the process of work, can read at any time without problems. To work at a computer (so that the light does not shade the screen), it will be possible to turn on only one point of illumination, which is reasonable to place a little to the side - it will become a source of subdued light.

Among modern design concepts, there are also options for lighting tables from below, through the design of the countertop, however, it will be problematic to cope with such a complex “technical task” without a qualified electrician, and the practical benefits of such structures leave much to be desired.

The choice of light temperature for almost any table design is purely individual and depends more on the place of use. In classic small bedrooms, warm color combinations will be relevant.

In the interior of the kitchen, on the contrary, cold shades will fit more harmoniously. Much depends on the style. Hi-tech, for example, is often imprisoned precisely for a cool range. Accents in the classic, colonial style and some variations of the loft, on the contrary, are best placed on the warm segment.

Forms

The table can be made absolutely anything, completely carved-carved, but the design has already developed several classic and practical shape ideas. Among them:

Rectangular. It was these tables that were popular in almost all historical eras. In Russia, the boyars gathered behind them, they served as a place for a meal for peasants in huts and the basis of tavern life.

In Soviet times, they were slightly pushed back by other forms - square, designed to minimize living space as such. Now rectangular tables are no longer associated with the ideas of dominance and patriarchy, but have retained their immanent massiveness and hardness. Most often used in large rooms. Suitable for summer cottage, living room, spacious kitchen.

Square. Products of this form allow you to perfectly organize the space. Their use is reasonable and economical. In addition, it is always possible to move such tables. Often there are folding models that turn from square into rectangular.

It is not easy to make such a product on your own. However, you can simply make two identical tables. Let us clarify that in terms of a home-made approach, it is square and rectangular tables that are suitable for the “pen test” of novice masters. And it’s easy to make, and the field for experiments is wide.

rounded. A round or oval piece of furniture is suitable as a coffee or night table. This is an ideal shape for apartments where families with children live, as it avoids unpleasant collisions with sharp corners. It is technically more difficult to make them, but the most unexpected items, for example, car tires, can always come to the rescue.

Designer forms. Table edges do not have to be even. Sometimes they are made curvilinear. Products can be rounded on one side, having right angles on the other. Triangular patterns are becoming more and more popular.

For example, in the kitchen it will be advantageous to look at a table that is rectangular in relation to the seats and rounded towards the sink and cabinets. Guests will be able to sit comfortably, and the hostess or host, while treating them, will not constantly bump into corners. Naturally, the manufacture of such models will require higher technical skills. The main difficulty will be how to cut a suitable shape. This also imposes some restrictions on the materials used - beams, boards and logs in many such structures are technically inapplicable.

How to make from improvised materials

Sometimes it is difficult to restrain the imagination, then very interesting variants of improvised "desks" are born, which can be used both in nature and in modern high-tech interiors and not only - even at work. It is not difficult, for example, to make a table from a car wheel, or rather, tires. Attach chipboard to it on one side - a little less than the radius, and on the other - legs. You can decorate the side surfaces and the lid to your taste.

If you drag the table with fibers or ropes, you will also get an ottoman - two in one at once. To create more effective fasteners, stock up on liquid nails. The cover of such furniture can be made removable and subsequently stored in the "wheel" whatever your heart desires. With a competent approach, such a hiding place will completely become a mini-safe, where you can protect things at least from children, and not every unlucky thief who breaks into your home will guess such a little trick.

Nobody bothers to collect old boxes into a useful design: you get a kind of interesting labyrinth table. However, here you need to be very careful - many craftsmen who posted their creations from boxes on the Internet turned out to be something more like an urn. To avoid this, do not leave too much free space in the center of the structure.

Another, perhaps even more extreme option is to design a table based on an old suitcase. Such Soviet colossus is waiting for the hour of its disposal on many balconies of the country, and perhaps now is their finest hour. Just do not rely in the literal sense of the word on exceptional Soviet quality - it is better to strengthen the product with sheets, for example, plywood. You will need more legs and wheels.

Disinfect the product before starting work. At the final stage, it can be varnished, painted or pasted over with a cloth. This option is suitable for colonial and various retro styles, and in general it will look at least original in any room. With benefit in working on the table, you can also use old frames - the main thing is to strengthen them well. With adequate design, you can achieve all the benefits of the effect of pop art style.

A loft-style pallet table will decorate almost any interior of a modern living room. You can also make an interior object from pallets, from an old window sill or countertop (with an antique effect), from ceramic tiles, professional pipes. A table made of a profile or water pipe is a fashionable idea at all. And in general, almost anything is suitable for creating creative furniture: from old chests and barrels to mirrors, wallpaper rolls and batteries - the main thing is to trust your imagination, sense of style and technical skills in working with material and tools.

Beautiful interior placement ideas

And finally, let's look at some interesting examples of homemade tables in various interiors. Let's start with the cottage. At a distance of a few meters from the landings, a large table made of lacquered boards will fit in well. Light or dark brown color will be in perfect harmony with the greenery. The tabletop is divided into five parts along the narrow part (according to the number of boards). Having fastened them from below, we will keep the effect of naturalness and naturalness.

From below, the table will also be fastened with two overlaps, on which it will be convenient to put your feet. The benches are also attached to the table (consisting of three boards each). Favorable design is emphasized by additional neat carving on the sidewalls. As a result, we have before us almost an example of the pre-revolutionary tsarist Russian style of the mid-19th century, or even modern (how to look).

It was in this environment that connoisseurs of rural idyll met guests at the beginning of the 20th century, organized creative meetings, exhibitions and even theatrical performances. Such a table does not look old-fashioned, it seems to continue the interior of a classic country house, where there is at least glass and metal.

Another example. Table-river for the living room. The easiest way to make a transformer with your own hands is to make its imitation, that is, do not use a plug-in structure in your work, but paint the product accordingly. In fact, this is a classic wooden table with a relief surface, which will successfully stand next to a sofa or armchairs.

The color is better to choose depending on the style of the room. Light wood will be in harmony with light light tones and vice versa. The dyed part (blue or its shades) should be in harmony with the chandelier or ceiling. On such a table, low vases with flowers or greenery will look beautiful. The simpler the design of such a table, the better - it can be used both as a coffee table and as a dining table.

The next idea - for a corner computer table - is also quite real for do-it-yourself implementation. We will make the corner parts rectangular, and the one that protrudes on us is of an arbitrary, but wide and comfortable shape, so that you can put your hands on it, put the keyboard. From materials we use plywood or chipboard.

Regular wood will work, as will old countertops, but working with the form in this case will be a little more difficult. If, nevertheless, a “difficult” material is chosen, pay attention to varnishing and painting, it is better to pay special attention to these stages of work.

We use uniform color schemes, without abusing light shades. In our example, the table will be brown. However, for the perfection of the design idea, the color of the table should be harmonized with the color of the monitor, keyboard and system unit.

Among the night tables, a two-level version will be practical and easy to manufacture. It's easier to make it rectangular, but if skills allow, it's better to make it round. The lower overlap is placed at the level of 10-15 cm from the floor, the upper - at the level of the height of the mattress.

For a bedroom decorated in dark colors, a soft dark texture is suitable. The table can be painted even in black paint. It will thus become a color spot in the room, giving additional contrast to the bed and floor. A nice visual effect will appear if you place a carafe of water and a glass on it.

And the last example is a compact small night office with two drawers. In this case, choose dark colors. The wood will need to be well processed and varnished. The design of drawers is as simple as possible.