Mitsubishi electric air conditioner modes. Overview of mitsubishi air conditioners and operating instructions for the consoles. Swing vertical guides

Instructions on the following model:

MSC-GE20VB MUH-GA20VB
MSZ-EF25VEB MUZ-EF25VE Design Inverter
MSZ-HC25VA
MSZ-GE35VA / MUZ-GE35VA Standard Inverter

MSC-GE20VB MUH-GA20VB

Precautions 1
Disposal 7
Title of each part 8
10
Selection of operating modes 12
Adjusting the air flow direction and fan speed 15
Economy cooling mode 16
Using Timer 16
Cleaning Your Air Conditioner 17
18
21
21
Specifications 23

Precautionary measures
Since there are rotating elements and conductors,
touching which may result in electric shock, be sure to
read these "Precautions" before use.
The information in this section is important for your safety before
use be sure to study it!
After reading this manual, keep it together with the installation manual in
accessible place.

Signs and their meanings
WARNING!: Improper implementation of these recommendations with high
likely to lead to dangerous consequences such as death, serious
trauma, etc.
ATTENTION!: Failure to properly follow these recommendations can lead to
the occurrence of a dangerous situation during operation.

Meaning of Symbols Used in This Manual

Make sure you don't

Be sure to follow the instructions.

Never insert your finger or stick or the like
items.

Never stand on the indoor / outdoor unit or place
objects on them.

Risk of electric shock. Be careful.

Be sure to disconnect the power plug from the outlet.

Be sure to turn off the power

WARNING!
Do not plug the power cord of the air conditioner into an extension cord.
or connect multiple devices to the same outlet.
It may cause overheating, fire or injury.
electric shock.
Make sure the power plug is clean and securely plugged into
outlet.
contamination of the plug may result in fire or injury
electric shock.
Do not bundle, pull, damage or modify the cable
nutrition. Do not heat it or place heavy objects on it.
items.
Doing so may result in fire or electrical shock.
current.
Do not turn off the OFF / ON switch or try to disconnect /
connect the plug during operation.
This can create sparks that could result in a fire.
Only after turning off the indoor unit using the remote control
remote control is allowed to switch the switch to

OFF position or disconnect the plug.
Do not expose yourself to cold air for
long time.
This can be harmful to your health.
It is forbidden to install, move, disassemble,
change or repair the air conditioner.
Improper handling of the air conditioner may result in
fire, electrical injury, or water leakage

WARNING!
Do not insert fingers, sticks, or other objects into entry points and
air outlet.

speed during operation

WARNING!
In case of odd work (for example, a burning smell),
stop the air conditioner and unplug it or switch
switch to OFF position.
Continued operation in this case may result in malfunction,
fire or electric shock. In this case
contact your supplier.

WARNING!
If it doesn't cool or warm, chances are that
a refrigerant leak has occurred. In this case, please contact your
dealer. If refrigerant needs to be pumped in for repair, call
a specialist to clarify all the details.
The refrigerant used in the air conditioner is safe. Usually
no leakage occurs. However, if refrigerant leaks and
possible contact with hot objects, for example
fan heater, kerosene heater or stove,
the appearance of harmful gases is possible.

ATTENTION!
Do not touch the air intake and aluminum fins
indoor and outdoor units.
This could result in injury.
Do not spray insecticides or flammable aerosols on
device.
Doing so may result in fire or deformation of the device.
Do not expose pets or houseplants
direct action of the air flow.
This can lead to injury to animals or plants.
Do not place other electrical appliances or furniture underneath
indoor or outdoor unit.
Water may drip from the device and cause damage.
or a malfunction of the electrical appliance.
Do not use defective fasteners to install the air conditioner.
elements.
The device may fall and injure people.

ATTENTION!
Do not use an unstable bench for work or cleaning
air conditioner.
It could cause injury if you fall.
Do not pull on the power cord.
This can damage individual strands of the current-carrying wire and cause
to overheating or fire.
Batteries must not be charged, disassembled or disposed of in a fire.
Doing so may cause electrolyte leakage, fire or explosion.
Do not use the device for a long time when
high humidity (80% or more), for example, with open doors
or windows.
excess condensation can wet or damage furniture.
Do not use the device for special purposes such as
storing food, raising animals or
plants, for storing precision instruments or art objects.
This can degrade the quality of the items and cause harm.
animals and plants.

Do not direct the air flow from the air conditioner towards appliances with
open flame.
This can lead to incomplete products in the air.
combustion.

ATTENTION!
Switch off and unplug the appliance before cleaning.
or set the switch to OFF.
This can lead to injury as the fan rotates at a high
speed during operation.
If the device will not be used for a long time
time, disconnect the plug from the socket or set the switch to
OFF position.
Dirt can accumulate inside the device and cause
overheating or fire.
Replace all batteries in the remote control
new, of the same type.
Using an old battery together with a new one may cause
heat, electrolyte leakage, or explosion.
If electrolyte comes in contact with skin or clothing, carefully
rinse with clean water.
If electrolyte gets in your eyes, rinse them with clean water and
seek medical attention immediately.
Make sure the area is well ventilated when
use of heating devices in the room,
using the combustion reaction.
Insufficient ventilation can lead to oxygen starvation.
Turn off the switch during thunderstorms whenever possible
lightning strike.
The device can be damaged by lightning strikes.
After using the air conditioner for several seasons,
it is necessary to carry out additional inspection and maintenance in
addition to regular cleaning.
Dirt or dust in the unit may cause an unpleasant odor, contribute to
fungal growth or may clog the water drainage channel, leading to leakage
water from the indoor unit. Inspection and maintenance of the air conditioner
require special knowledge and skills - contact your

supplier in this regard.
Do not touch the switches with wet hands.
This could result in electric shock.
Do not wash the air conditioner with water or place items containing water
such as vases on it.
This could result in fire or electric shock.
Do not stand or place any objects on the outdoor unit.
Possible injury if you or this object falls.
Installation of air conditioner

WARNING!
Ask your dealer to install the air conditioner.
It does not need to be installed by the user for this to be required
availability of special knowledge and skills. Incorrectly installed
the air conditioner may cause water leakage, fire or injury
electric shock.
Providing specialized power for the air conditioner.
not supplying a separate power supply may result in overheating or
fire.
Do not install the device where leakage is possible
flammable gas.
If gas leaks and accumulates around the outdoor unit, it may cause
to an explosion.

WARNING!
Ground the device properly.
Do not connect the ground wire to gas or water pipes,
lightning rod or telephone wire. Improper grounding can
cause electric shock

ATTENTION!
Use an earth leakage breaker depending on the
region where the air conditioner is used (for example, in regions with
high humidity).
If an earth leakage breaker is not installed, it may
cause electric shock.
Make sure the condensation is dry.
If the drain duct is clogged, water may drip from the
indoor / outdoor units, wetting and damaging furniture.
In case of abnormal operation of the air conditioner
Turn off the air conditioner immediately and contact your dealer.

DISPOSAL
To dispose of this product, contact your dealer.
Note:
This symbol is only valid for EU countries.
This symbol is affixed in accordance with Directive 2002/96 / EC Article 10 Information
for users and Annex IV, and / or Article 20, Directive 2006/66 / EC Information
for end users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured using
high quality materials and components that can be recycled and / or
reused. This symbol means that electrical and electronic
equipment, batteries and accumulators at the end of their service life should be disposed of
separate from household waste. If a chemical symbol is printed under this symbol (fig.
1), this chemical symbol means that the battery or accumulator contains heavy metals
in a certain concentration. It will display as follows: Hg: mercury
(0.0005%), CD: cadmium (0.002%), Pb: lead (0.004%). In the European Union there are
separate collection systems for used electrical and electronic products, batteries and
batteries. Please transfer this equipment, batteries and accumulators to your
local waste recycling community. Please help us save
the environment we live!

Name of each part

Preparation before starting work
Before you start: Plug the power cord into a power outlet and / or the switch into
position ON.
How to set the operating mode of the remote control.
Depending on the type of air conditioner, it is necessary to correctly set the switch to
Warm-Cold or Cooling only.

Switch position value.

In case of choosing
the wrong mode may damage the device.

Installing batteries in

Make sure the polarity of the batteries is correct.
Do not use manganese batteries. This could damage the remote control.
Do not use rechargeable batteries.
Replace all batteries with new ones of the same type.
The batteries can be used for approximately 1 year.
Press the RESET button gently using a thin tool.
If the reset button is not pressed, the remote control may not work properly.

Setting the current time

1 Gently press the Clock button using a thin object.
2 Then, by pressing the time setting buttons, set the hours and minutes

Selection of operating modes

1 Turn on the air conditioner by pressing the
2 Select the operation mode by pressing the operation mode selection button
Each repeated pressing will cycle through all modes.

3 Select the desired room temperature by pressing the buttons
Pressing the power button again will turn it off.

Blinking or lighting values of the lamps in the indicator area on the indoor unit.
Both are on - The air conditioner is working to cool / heat the air until
set temperature.
One is on, the other is off - the temperature has reached the specified one.
One is on, the other is blinking - Stand-by mode (ONLY in a multi-split system).

Multi split.
Two or more indoor units can be serviced with one outdoor unit.
When several indoor units work at the same time, they should be used for
the same task (heating or cooling). If heating is selected on one and
then the second one turns on in cooling mode, the first goes into standby mode (standby).

OPERATING MODES
I FEEL mode
In this mode, the air conditioner selects the type of operation itself, depending on the temperature in
the room. If the temperature is higher than the set one, (for example, 25 ° C, and the set point is 24), then it
enters the COLD mode. When it reaches 24 ° C, it automatically switches to the mode
DRY ... If the temperature is lower than 23 ° C, the air conditioner will switch to the HEATING operation mode.
Note:
When operating in COLD mode, it is impossible to change the preset room temperature if
its value is more than 2 ° C higher. It is necessary to wait until the air cools down and only
then change this value.
COOL mode
Cooling the air in the room to the set temperature and maintaining at the set
level.
DRY mode
Dehumidification of your premises. The air may cool slightly. Desired temperature
cannot be set at all in dehumidification mode.
FAN ONLY mode
Air circulation in your room.
Heating mode
Heating and maintaining warm air at the desired level.

Emergency mode
If you cannot use the remote control ...
You can operate the air conditioner by pressing the emergency button
mode switching. Each press of it will cyclically turn on
the following operating modes.
In the COLD ONLY operating mode, these will be the following modes:

on the second press, shutdown.
In the COLD AND HEAT mode, these will be the following modes:
when pressed for the first time, activates emergency cooling;
on the second press, the emergency heating is switched on;
on the third press, shutdown.
At the same time, the temperature is set to 24 ° C, ventilation mode is medium, mode
horizontal damper operation - AUTO.
Note: the first 30 minutes work is done in test mode, there is no temperature control,
ventilation mode switched to maximum.

Automatic resume of work.
In the event of a power failure, if this function has been
is turned on on the remote control, after the power is turned on, the air conditioner
will automatically work in the last mode. If you want her
disconnect, contact your service representative.

Adjusting the air flow direction and speed
fan

Click on the button
and select the intensity of work from four options: Auto, weak,
medium and strong.
Click on the button
and select the position of the air guide. Modes available
Auto (double beep), five levels of incline and Swing mode.
The AUTO mode selects the most efficient option.
When one of the five manual modes is specified, air will be directed
under one of five tilt angles.
When you select Swing, the flap is constantly oscillating.
You can also manually set the direction of the air outlet. For what
you need to manually adjust the position of the vertical vane.

Economy cooling mode (“ECONO COOL”).
During COOL operation, press the button to start operation
ECONO COOL.
The device performs actions aimed at maintaining the specified
temperature. The temperature you set is automatically set 2 ° C higher.

Using the timer
Press the buttons

The first will indicate the time the air conditioner is turned on, the second will indicate the shutdown time.
To set the time in hours and minutes, use the buttons
each press increases the value by one.
Pressing again cancels the start of the timer.
Both timers can be used together, in which case one sets the time
on, the second off.

Cleaning the air conditioner
Instructions:
Turn off the power or turn off the switch before cleaning.
Be careful not to touch metal parts with your hands.
Do not use gasoline, thinners, abrasive powders, or insecticides.
Use only detergents previously diluted in water.
Do not expose to direct sunlight, heat or fire to dry.
Do not use water over 50 ° C.

1. Air purification filter (option)
If the air filter is clogged, it can reduce the power of the device.
or cause condensation to form at the air outlet.
The air purification filter is disposable.
If the filter turns dark brown, replace the filter immediately.
Recommended to change every 4 months for best performance.
Serial number MAC-1300FT
2. Air filter (catechin air filter)
Must be cleaned every 2 weeks
Remove dirt with a vacuum cleaner or rinse with water.
dry in the shade before putting it back.

What is a Catechin Air Filter?
Catechins are bioflavonoids found in green tea, which is known for its
antiviral and antioxidant properties. In addition, catechin has
excellent deodorant performance. Catechin air filter not only
improves air quality, but also prevents the spread of bacteria and viruses in
the room.
Note:
Clean the filter regularly for best performance and
energy consumption.
When kept in the air conditioner for a long time, the water promotes the growth of fungi such as mold.
To prevent fungal growth, set the temperature to the highest setting at
manual mode and leave the air conditioner to work for 3-4 hours. Usually, for this
time, the water inside the machine dries up.

If you think there is a problem
Even when these points are checked, if the device does not start working normally,
stop using the air conditioner and consult your dealer.

Symptoms	Possible cause and methods of its elimination
The device is not working.	Is the circuit breaker turned off? Is the power plug not plugged into the outlet? Is the timer set?
The device does not turn on within 3 minutes after shutdown.	This is how the microprocessor is programmed, it is necessary to protect the air conditioner. Wait please.
Turns off in Drying mode. fan.	To prevent the formation of excess water on elements of the outdoor unit compressor periodically turns off, which does not affect the thermal regime in room. The temperature will be maintained at according to the value you specified.
Mist is emitted from the air outlet of the indoor unit.	Indoor air contains a lot of moisture and the flow of cold air that comes out of air conditioner causes a similar phenomenon in the area contact.
Vertical oscillations of the vertical vane in the "Swing" mode periodically stop.	This is normal in this mode of operation.
Airflow direction in horizontal plane fails adjust with the remote control, observed periodically independent changes	When Cold or Dry mode is selected and it is running from 30min to 1 hour, then to prevent dripping condensate from the indoor unit air conditioner automatically selects horizontal outlet air direction.
During HEAT operation work stops at 10 minutes.	This is necessary to defrost the external block. At low outdoor temperatures possible significant freezing of condensate, with who need to fight.
After the appearance of electricity in network air conditioner yourself starts to work, although no one in this time did not manage with the help remote control.	If the mains voltage disappears while the air conditioner worked on the command received from remote control, then after the power appears on the network, it will automatically continue to work in the same mode in which he worked before the shutdown. Read more in See Auto-resume function work ”, see page 14.
Multi split system
Indoor unit, which is not now running heats up and makes sounds flowing water.	Even if this inner element is not used, it continues to receive a certain amount refrigerant, which is normal.
Operating mode "HEATING" is selected, but the device starts to work only after 10 minutes.	This is normal as it may be necessary to warm up the outdoor unit and remove ice from it.
Outdoor unit
Water flows from the outdoor unit	When using the Heat and COOL modes, the pipes and their connections may cool, which leads to the appearance of condensation on them. Condensation may appear on the outdoor unit when operating in Heating mode. When operating in the "Heating" mode, ice may appear on the outdoor unit, which will melt and drip during surgery defrosting the outdoor unit.
White smoke comes out of the outdoor unit	Heating mode produces steam that looks like smoke.
Remote control
The display on the remote control is not appears or becomes dim	Are the batteries empty? Is their polarity correct? Is there any button on the remote pressed?
Heat or cool the room not satisfactorily succeeds.	Is the temperature setting correct? Is the correct operating mode selected? fan? Increase its power. Are the filters dirty? Are there any debris on the fan and heat exchanger of the indoor unit? Are there any contamination ventilation holes of the external and indoor unit? Are the windows and doors in the room closed? Does it work at the same time indoors gas burner or extractor fan? In this case, the effect of the work the air conditioner will be lower. If the temperature outside is very high, then the air conditioner will not work like this efficiently. At low temperatures outside, heating will not work as efficiently.
When heating mode is turned on air does not immediately blow out of the device.	Please wait while the device prepares for warm air.
Air flow
There is a strange smell in air flow from internal block.	Are the air filters clean? Are the indoor fan and heat exchanger clean? The device may be sucking in bystanders. odors already present in the room (from carpet, walls) and blow them out.
Sounds
Crackling is audible
Sound may occur due to expansion / contraction plastic when the air temperature changes.
Gurgling is audible	This sound can be generated when outside air sucked from the drain hose when turned on in the room of the exhaust device or fan, which causes the movement of water in the drain hose. This sound is also heard when the wind is strong. swings the drain hose.
Mechanical sound is heard from indoor unit.	The sound can be caused by the compressor or fan.
You can hear the water flowing.	The sound can be caused by the movement of condensation or refrigerant.

In the following cases, stop the air conditioner and consult your dealer.
If water flows or drips from the indoor unit.
When the left operation lamp blinks.
If the circuit breaker trips frequently.
The remote control signal does not reach the room where electronic
fluorescent lamps.
Operation of the air conditioner interferes with radio or television signals. V
In this case, an RF amplifier may be needed.
When abnormal sounds occur.

When the air conditioner will not be used for a long time
1. Turn on the heating mode manually and set the maximum temperature
keep the air conditioner in this mode for 3-4 hours. (This is necessary to dry
internal elements and prevent the growth of fungi).
2. Press the "Power off" button on the remote control.
3. Disconnect the plug from the socket.
4. Remove the batteries from the remote control.
For restarting after a long period of inactivity.
1. It is necessary to clean the air filters.
2. Make sure that the openings on the outdoor and indoor units are not covered.
air outlet and inlet.
3. Make sure the ground is connected correctly.

Installation site and electrical work
Place of installation
Not install the air conditioner in the following locations.
Where there is a lot of machine oil.
Salty locations such as the coast.
Locations where hydrogen sulphide gas is generated, such as hot springs.
In places where oil products are discharged or when the area is filled with oily smoke.
Where there is RF or wireless equipment.
Where the air outlet from the outdoor unit will be blocked.
Where the noise of the outdoor unit will disturb other people.

Electric installation work
Provide a separate circuit for powering the air conditioner.
Be sure to observe the power rating of the circuit breaker.
If you have any questions, please contact your dealer.

The installation locations of the outdoor unit must be at least 3 m from the TV antenna,
radio, etc. In areas where the signal is weak, a greater distance between
outdoor unit and antenna device, if the operation of the air conditioner interferes with radio reception
or television signals.

SPECIFICATIONS

Mitsubishi Electric air conditioner MSZ-EF25VEB MUZ-EF25VE Design Inverter

Description of each part

Selection of operating modes
Additional settings for work
Cleaning your air conditioner

When the air conditioner will not be used for a long time
Selecting an installation site and carrying out electrical work
Precautionary measures

Description of each part
External block.

1 - Air intake openings.
2 - Refrigerant pipes.
3 - Drainage tube.
4 - Air outlet.
5 - Collection of condensate.

Indoor unit.

1 - Front panel.
2 - Nanoplatinum air filter.
3 - Electrostatic air filter (removes dust, allergens and other impurities).
4 - Air intake.
5 - Horizontal damper.
6 - Air outlet.
7 - Heat exchanger.
8 - Indicator lights.
9 - Receiving device for the remote control.
10 - Emergency switch.

Remote control.

1 - Display of the remote control.
2 - Buttons for setting the temperature.
3 - Button for selecting the operating mode.
4 - Starting the "Economy cooling" mode.
5 - Save button.
6 - Turning on / off the air conditioner.
7 - Fan power control.
8 - Controlling the position of the horizontal damper.
9 - Add-remove time for the timer.
10 - Weekly timer.
11 - Reset all settings.
12 - Clock setting.

Preparation before starting work
Attention! To install or replace the batteries, you need to remove the cover, replace BOTH batteries with new ones and after closing the cover, press the "Reset all settings" - RESET button.

To set the correct time, press the “Clock Setting” button with a thin object and then use the time setting keys to set the correct time. Then press "Day" to set the day of the week. After that, for the last time, press the "Clock" - "Clock" thin object.

Selection of operating modes
After connecting to the mains and installing the batteries, you can turn on the air conditioner. By pressing the power button (No. 6) on the remote control, you can select one of several modes. To do this, press the “Mode” button (no. 3) one after the other. Use buttons # 2 to set the temperature.
Description of the modes.
AUTO mode. To maintain the temperature, the air conditioner independently heats or cools the air supplied to the room, depending on the ambient temperature. Note: do not use this mode with a multisplit system when several indoor units are connected to one outdoor unit. If one of them is included in the heating (cooling) mode, all the others can work only in the same mode and therefore will not be able to switch between modes.
Heating - "HEAT" mode. Heating the air. Note: when starting this mode, there may be a delay in the air supply at the beginning and stop up to 10 minutes in operation - this is necessary to defrost the outdoor unit.
Cooling - "COOL" mode. In this mode, the air is cooled and its temperature is maintained at a given level. Note: Do not use this mode when the outdoor temperature is below -10 degrees Celsius. This may damage the outdoor unit.
Dehumidification - "DRY" mode. In this case, the air conditioner minimally cools, dehumidifying the air in the room. You cannot set the temperature level in this mode.
Ventilation - "FAN" mode. The air conditioner circulates the air in the room.

Additional settings for work
The indicator lights on the front panel can indicate three modes. Both are on when the mode has not yet been reached and the difference from the set temperature is more than 2 degrees. One is on, the other is off - the set temperature has been reached. The third mode can be seen only when the multisplit system is running. One is on, the second is blinking - this indoor unit has entered standby mode, since the other is turned on in the opposite mode (for example, this one was cooling, and the other was turned on for heating).
Autorun function. If the network was de-energized when the air conditioner was operating in the mode you set, then after the appearance of electricity, it will turn on independently in the same mode.
If it is not possible to use the remote control.
To operate the air conditioner without a remote control, you can use the emergency start button. By successively pressing it, you turn on the air conditioner in the cooling-heating-off mode. The first 30 minutes after starting the ventilation mode is set to the maximum and the set temperature is not taken into account - the device operates in the maximum possible cooling / heating mode.
By pressing the FAN button you can set the fan operating mode. It can be Auto, quiet, weak, medium, strong, forced. By pressing the VANE button, you can select one of the following operating modes: Auto, manual with five tilt options, "Swing" (regular swinging of the guide).

Memory mode for settings.
Having selected the operating mode you are interested in (cooling, heating), setting the intensity of the fan and horizontal damper, you can save these settings by pressing the “I SAVE” button - a maximum of two options.
Energy saving mode.
By pressing the "Econo COOL" button you switch on the cooling mode with reduced energy consumption.

Timer.
By pressing the ON or OFF button you can set the timer settings. A maximum of 28 time points can be set. For example, the air conditioner will turn on every day at 6-00, turn off at 8-00, then turn on at 17-30 and turn off at 20-00.

Cleaning your air conditioner

Memo.
Be sure to unplug the air conditioner before cleaning.
Do not touch metal parts.
Do not use gasoline, abrasive powders, insecticides.
Do not dry parts of the air conditioner in the sun or near heat sources.
Do not use water hotter than 50 degrees.

Nanoplatinum filter.
This product is made of ceramic coated with platinum microparticles. It cleans the air better than a catechin filter. Additional air purification is provided by an electrostatic air filter, which must be washed every three months. Monitor the condition of the filters to improve the quality of the air conditioner. Be careful as plastic parts are easily scratched and will degrade their appearance.

If you think there is a problem
I cannot give a single command using the remote control - check the operation of the remote control, the correct installation and serviceability of the batteries.
The horizontal vane does not move. This may be normal in some operating modes. Check for foreign matter or damage. Press the RESET button on the remote control.
It is not possible to control the position of the damper in some modes, when the electronics itself determines its position and movement.
After restarting, the air conditioner does not work for 3 minutes - this is normal and is necessary for the safety of the air conditioner.
When starting space heating, the air conditioner does not work for 10 minutes or stops working for this time. This is necessary to defrost the outdoor unit.

If you use a multisplit (two indoor units), then please note that both indoor units must work in the same mode (both for cooling or both for heating), so if the second is turned on in a different mode, the first goes into standby mode.

If you think that the device does not cool or heats the air well enough, please check the following points. Whether the door and window are closed, whether it is too hot outside - this reduces the efficiency of the air conditioner, whether the filters are clean and there are no obstacles to the air outlet from the outdoor / indoor units. If the problem persists, call a professional as there is a possibility that it is a refrigerant leak. This substance, in contact with fire, can lead to the formation of hazardous substances.
Sounds. If sounds are heard during operation, this may be the norm. When the temperature of the indoor unit changes, its plastic elements will make sounds. Also, the movement of condensate or refrigerant can also cause sounds.
If a strange odor appears in the outgoing air, check first of all its possible sources - carpet, wall and other objects adjacent to the indoor unit.

When the air conditioner will not be used for a long time
Before turning it off for a long time, turn it on in heating mode for 3-4 hours. During this time, moisture from the indoor unit, which can cause fungal growth, will be completely eliminated. Next, you need to turn off the device by pressing the shutdown button on the remote control. Then remove the batteries from the remote control and disconnect the air conditioner plug from the outlet.

To connect after a long inactivity, you need to wash the filters, check if there are any obstacles to the movement of air near the outdoor and indoor units, insert the batteries and set the time in the remote control.

Selecting an installation site and carrying out electrical work
Place of installation
Do not install the air conditioner in the following locations.
Where there is a lot of engine oil.
In salty climates such as the coast.
In places where hydrogen sulphide gas is generated.
In places where there is a release of oil products in the atmosphere.
Where high frequency or wireless equipment is used.
Where the air outlet from the outdoor unit will be disturbed.
Where the noise from the operation of the outdoor unit may disturb other people.

Precautionary measures.
Do not connect the air conditioner to an extension cord together with other appliances, it may cause fire or malfunction. Ensure that the plug and wire are clean and intact and use only the original power cord. Do not remove the plug from the outlet and turn off the switch while the air conditioner is running - you must first turn it off with the remote control. The device must be powered from a separate socket. Do not stand in the path of the cooled air flow, as this can negatively affect your health. The product must be used by people who have studied the instructions and do not have age restrictions or health conditions that limit the ability to understand it. Children must supervise the air conditioner.
The assembly work must be carried out by the specialists of the service center - do not do it yourself! Since refrigerant will be pumped during installation, all operations must be carried out by qualified personnel. Make sure the device is properly grounded before use.
Do not insert fingers, pencils, or any other foreign object into the openings on the air conditioner, otherwise injury may result. Do not stand on the indoor and outdoor units, do not place foreign objects on them. The indoor unit may only be washed by specialists with appropriate training.
Do not spray flammable substances or insecticides on or around the air conditioner. Observe the polarity when using the batteries in the remote control. Change both batteries at the same time.
Unplug this apparatus during lightning storms.
Change the air filters promptly. If strange things appear in the operation, the device stops cooling or heating the air, contact the specialists who installed the air conditioner.

Mitsubishi Electric air conditioner MSZ-HC25VA

Table of contents
Disposal
Name of each part
Preparation before starting work
Selection of operating modes
Additional modes and settings
Useful Tips
Cleaning your air conditioner
If you think there is a problem
When the air conditioner will not be used for a long time (At the end of the season of use)
Installation site and electrical work
Precautionary measures

Disposal
When creating this model, materials were used that can be sent for recycling. For this reason, it is necessary to clarify with the territorial authorities how exactly to dispose of specifically in your region.

Name of each part
Outdoor unit

1 - Air is drawn into the outdoor unit from the rear and from the side.
2 - Air outlet to the outside.

Indoor unit

1 - Air is drawn into the indoor unit at the top.
2 - Sensor for receiving signals from the remote control, display.
3 - Air outlet.

Remote control

1 - Disable / Enable.
2 - Mode selection.
3 - Timer control.
4 - Timer setting.
5 - Complete reset of all settings.
6 - Setting the temperature.
7 - Selection of the fan operating mode.
8 - Start the economy mode.
9 - Control of the position of the horizontal partition.

Preparation before starting work
The air conditioner should only be connected to an outlet of the required rating, grounding is required. Install batteries (not rechargeable batteries) into the remote. Do not use batteries of different type and charge level for joint installation.
Selection of operating modes

Selection of operating modes
The following modes are available for the Mitsubishi Electric MSZ-HC25VA model:
automatic mode selection;
heating the room;
room cooling;
dehumidification of air;
ventilation (taking into account the operation of the air filter, this mode cleans the air).
To start the mode that suits you, press the mode selection button on the remote control. The auto-maintain temperature mode is used to keep the room temperature within the range you specified. When it rises above the required one, cooling is turned on, if it gets colder in the room - heating.
Heating will come in handy when it's cool. It should be remembered that when the mode is started, the fan in the indoor unit will not turn on immediately, but only when the heat exchanger warms up - this is the work of protection against the flow of cold air. In addition, in this mode, freezing is possible on individual elements of the outdoor unit, so the work will stop from time to time to remove ice from the outdoor unit.
Cooling mode reduces temperature and dampness. If you want to dehumidify the room without cooling it, then you need a dehumidification mode.
The dehumidification mode is fundamentally different in that the electronics tries to extract moisture from the air by minimizing its temperature.
Ventilating the room, the air conditioner with the help of filters simultaneously cleans the air in it.

Additional modes and settings
Due to the presence of an inverter motor control system, this model has minimal effect on the wiring. To work in any mode and start the engine, exactly the power that is needed is taken.
The catechin filter, due to the presence of bioactive substances similar to those found in green tea, is more effective against microorganisms than other types of filters.
Another important property of this model is the presence of an antioxidant filter. Special components destroy free radicals in the air, while working as a catalyst - without being wasted. Therefore, it will protect your health for a very long time without requiring replacement.
To save energy, there is an "Econo cool" mode. Working in this case, the air conditioner consumes less.
Automatic restart. For your convenience, the system remembers the last mode of operation and after an emergency power outage, it will automatically start working in the same mode.
Timer. For more convenience in using the air conditioner, a timer is provided for on-off. You can specify the start and stop times of the device in advance, so that later it turns on and off on its own at the time you specify.

Useful Tips
Avoid overcooling the room - it will be bad for your health and cause energy wastage.
Pay attention to the vertical damper - when heating, air should be directed downwards, when cooling, horizontally.
Close windows and doors to keep cold air in the room. Close curtains to prevent direct sunlight from heating up the room. Excess people in the room and the included heating devices complicate the operation of the air conditioner.
Keep your air filter clean - clean every 2 weeks.
Ventilate the area regularly to avoid oxygen starvation.
To reach the desired level of cooling or heating faster, first use the "Turbo" fan operating mode.

Cleaning your air conditioner
Be sure to use a stable support for work.
Unplug the air conditioner from the mains before starting.
Do not use abrasives, solvents (including gasoline), hot water. - this can damage the appearance of the plastic.
The filter in this model can be manually washed and reused many times. Dry all parts of this conditioner after washing in the shade.

If you think there is a problem
If your air conditioner does not work, check that the plug is plugged into a power outlet and that there is power. Perhaps the work is disabled by a timer.
If you cannot turn on the device for 3 minutes after turning it off, this is the work of the system, which protects the air conditioner from frequent starts.
When dehumidifying, the indoor unit is constantly turned off. In this mode, the electronics dries the air, cooling it to a minimum, so the indoor unit will stop periodically.
When heating starts, the air conditioner does not work immediately. This is protection against the release of cold air - first, the heat exchanger heats up, and then the fan turns on.
During heating operation, the air conditioner stops intermittently for 10 minutes. This is necessary to defrost the ice of the outdoor unit, which is periodically covered with ice in this mode.
In heating mode, white smoke comes out of the outdoor unit. Cold air escaping from the outdoor unit causes condensation in the air.
Mist is coming out of the indoor unit. Cold air from an indoor unit in a room with high humidity will cause fog to appear in the contact area.
After the appearance of energy, the air conditioner began to work by itself. The auto-restart system will automatically start the air conditioner to work in the mode in which it worked before the power was turned off.
Water flows from the outdoor unit. This is normal - when heated and cooled, parts will be colder than the surrounding air, on which condensation or even ice will appear.
The picture on the remote control is deteriorated or disappeared. Check the presence and condition of the batteries. Check if they are installed correctly.
The air conditioner does not heat / cool. This may be due to a refrigerant leak, contact your service company.
The air conditioner does not cool the room well. If there are too many people in the room or there are heating devices, then its work will be difficult. Make sure the windows in the room are locked. If the curtains are open, sunlight will heat up the room and interfere with the operation of the air conditioner. Check the condition of the air filter - dirty, it creates a barrier to air movement. Check if the correct operating mode is selected.
There is a smell in the air from the unit. Check how clean the air filter of the indoor unit is. The smell can be drawn from the surrounding objects (walls, wallpaper).
A crackling sound is heard. Expanding when heated, the plastic will make similar sounds.
The sound of flowing water, dripping is heard. Condensation and refrigerant flow may well cause these sounds. If the device is turned off, the sounds are probably caused by the operation of the exhaust ventilation - air is sucked into the room through the condensate drainage hose.

When the air conditioner will not be used for a long time
Clean your air conditioner.
Turn on the heating for 2-3 hours. This will help dry the indoor unit and stop possible growth of mold and bacteria.
Switch off the device using the remote control.
Disconnect the plug from the outlet.

To turn on
Make sure there is enough air to escape from the outdoor unit.
Connect the plug to the mains, make sure that the grounding is working correctly.
Install batteries (rechargeable batteries will not work) into the remote control.

Installation site and electrical work
Do not install the air conditioner in salty, humid climates where there is a lot of machine oil and hydrogen sulfide. It should not be placed in places where flammable gases may appear in the atmosphere and where the noise of the outdoor unit will interfere with the occupants.
Please note that it is necessary to provide for where to drain the condensate from the outdoor unit. The connection should be made by specialists with experience.

Precautionary measures
Do not operate the air conditioner in places with salty and humid climates, where there is a large amount of engine oil and hydrogen sulfide. It should not be placed in places where there may be flammable gases in the atmosphere and where the noise from work will disturb the occupants.
Please note that it is necessary to provide for where to drain water from the outdoor unit.
Precautionary measures
It is forbidden to modify, change, repair, pull both the power cable and the air conditioner itself.
Do not place any objects on the air conditioner units.
It is forbidden to connect the plug of the device to an outlet of insufficient power, extension cord.
Do not pull out the power plug while the air conditioner is running - you must first turn off the air conditioner using the remote control.
Do not expose yourself, other people, animals or plants to prolonged exposure to cold air.
Do not insert fingers, pens, or any similar objects into the air conditioner.
If yours does not heat and does not cool at all, it may be a refrigerant leak - contact those who installed it.
Do not spray insecticides or flammable aerosols on the device.
Do not place electrical appliances or furniture under the units, as condensation may drip from the unit, which may damage the appliance.
Batteries must not be charged, disassembled or disposed of in a fire. Doing so may cause electrolyte leakage, fire or explosion.
Do not direct the air stream from the air conditioner to an open flame - incomplete combustion products may appear in the air.
Unplug your apparatus during lightning storms, when there is the possibility of a lightning strike.
After working several seasons in a row, additional inspection and maintenance should be carried out in addition to normal cleaning.

Mitsubishi Electric air conditioner MSZ-GE35VA / MUZ-GE35VA Standard Inverter

The high efficiency of the reverse cycle inverter of the heat pump in Mitsubishi Electric air conditioners is combined with stylish design and ultra quiet operation.

MSZ-GE Series very popular among air conditioners with split systems. The air conditioners are easy to operate and Mitsubishi Electric is well known for its reliability. The series is also represented by air conditioners up to 8 kW. If you are looking for an air conditioner for small spaces, then you can consider the MSZ-GE35VA with a 3.5 kW split system.

Elegant stylish design: Simple, ergonomic square shape and pure white color that fits perfectly into a wider range of interiors.

High efficiency inverter saves energy: advanced inverter technology gradually increases or decreases power depending on certain conditions, providing the set temperature faster, more efficiently, without sudden temperature fluctuations. This air conditioner combines advanced inverter, electronic and mechanical technology to achieve a synergistic effect that improves heating / cooling efficiency.

"I-save" mode: Easy function setting mode that allows you to return to the desired temperature by pressing a button on the remote control. The function provides the most suitable air conditioner settings to reduce energy consumption.

Ultra quiet operation- operates at an incredible 19 dB (A) in quiet mode, yet still maintains a comfortable indoor climate.

Fast cleaning- the louver opening through which the air is supplied can be easily removed in order to clean the fan. This increases work efficiency.

Why is an air conditioner with an inverter better?

Increasing the speed of the compressor motor, by controlling the operating frequency, provides an increase in power, as a result of which the air conditioner reaches the required room temperature faster than devices that are not equipped with an inverter.

The operating frequency of the motor compressor and the room temperature change are monitored in order to calculate the most effective signal to maintain the room temperature of the comfort zone.

OINT Lap DC Motor
This unique "Poki Poki" engine is manufactured using collaborative technology. This reliable motor operates on the basis of high density and high magnetic force, making it extremely efficient.

Rare earth magnet
The compressor is equipped with an innovative magnet rotor motor made of rare metals for greater efficiency. The rare metal magnet has a residual magnetic flux density three times higher than the former ferrite magnet.

DC ventilation motor

High efficiency DC motor that drives the fan of the outdoor units. It is 60% more efficient than an equivalent AC motor.

PAM (Pulse Amplitude Modulation)
Compared to the conventional active filter method, the simple Pulse Amplitude Modulation (PAM) control method found on the newer models helps to reduce energy waste. Combined with the Eco-Wave vector inverter, PAM control also improves power and efficiency.

Corrugated piping
Corrugated tubes are used in high performance heat exchangers to increase the heat exchange surface

Econo cool
Econo Cool is an intelligent temperature control that regulates the amount of air that is directed to the air conditioner cabinet. The ambient temperature can be increased by 2 degrees Celsius without loss of comfort, resulting in a 20% increase in energy efficiency. (Function available only during cooling).

Auto vane
The fan turns off automatically when the air conditioner is not in use.

Anti-allergenic enzymes
The anti-allergenic electric filter uses the power of static electricity generated in the filter in the same way that plasma is created to trap bacteria, pollen and other allergens in the air, which are then neutralized by an enzyme in the filter.

Nano Platinum Filter
The operating time of the air conditioning system is monitored and the user is notified when no filter cleaning is required.

Swing
The exhaust blades move up and down to distribute air evenly throughout the room.

Auto
Speed mode automatically adjusts the air flow inside the fan based on the current room conditions.

Wide & Long
This function is especially useful for wide large areas, ensuring good air circulation in all corners of the room.

Weekly timer
Easy to set your desired temperature during operation and turn on / off according to your lifestyle.

Accounting for errors
All operational failures are recorded.

Self-diagnosis function (display the verification code)
Verification codes are displayed on the remote control or the operation indicator to inform the user of detected faults.

Quick cleaning
The cover can be removed for quick cleaning, the vents can be opened without special tools, making it easy to clean the inside of the air conditioner in a few minutes. We recommend that you periodically clean your device to maintain optimum performance and conserve energy.

Low cooling temperature
Reduced fan speed of the indoor unit ensures optimal performance even at low outdoor temperatures

Automatic restart
Especially useful during power failure; the device restarts automatically.

ACO
The air conditioner automatically switches between heating and cooling to maintain the desired temperature.

Other features
Anti- allergenic enzyme filter - standard
Catechin filter
24 hour timer
Auto restart - after power failure
Optional: centralized controller; group controller; M- network connection
Working area: 18-29 m2
Sound pressure level - 47 dB (A)
Cooling capacity - 3.5 kW
Heating power - 4 kW
Air conditioner type - device with reverse cycle (reverse mode)
Connection to outdoor MXZ multi-split systems
Net weight - for indoor use 10kg; for the outside - 33 kg.
Dimensions - for internal use 295x798x232 mm; for the outside - 550x800x285 mm.

The air conditioner has entered tightly into the daily life of most people. It is used at home, in offices, in shopping centers - almost everywhere. With its help, you can easily and quickly both cool and heat the room. But with a huge demand, most consumers do not really know about all its capabilities. Not a few people know little about the designations of the buttons on the air conditioner remote control. This article will help you understand this issue.

Types and features

Air conditioner remotes are divided into:

infrared;
wired.

Remote controls that transmit a signal due to radiation are considered infrared. This system is used in wall split systems, cassette, ceiling air conditioners, as well as in some models of window air conditioners. Infrared remotes are convenient to use, but their range is limited to 8 meters, while it should be borne in mind that after 5 meters, malfunctions may occur due to bright lighting. This type of control is not suitable for systems installed above the recommended values, as well as those models in which the indoor units are hidden behind suspended ceilings or plasterboard structures.

Infrared remotes have a self-diagnosis system, therefore, during a failure, the indicator lamps on the indoor unit of the split system start flashing, so that the service department will need less time for diagnostics and repairs.

Wired control the air conditioner at any distance. In case of malfunctions, an error code is displayed on the display, which makes diagnostics even easier than with an infrared remote control. The wired type of control allows you to control the operation of 4-8 air conditioners. Some models have an optional temperature sensor to help ensure optimum performance.

HEAT

Regardless of the manufacturer of the split system, the main symbols on the air conditioner panel can be distinguished.

HEAT - heating, temperature up to 30 degrees. This mode is used to heat indoor air. It has a designation on the air conditioner control panel in the form of a sun. The program automatically raises the temperature to the set temperature as soon as it starts to drop. It is important to know that each appliance has its own limitations for use in cold weather. Restrictions in operation can be from -5 to -15 degrees, depending on the technical characteristics of the air conditioner. Do not neglect the rules for using the device in order to avoid damage. When choosing an air conditioner, it is important to know the conditions under which it can be used. There are models in which there are no restrictions.

COOL

This mode is used to cool the room in hot weather to 16-18 degrees. This function is considered the main one and is present in any air conditioner. It is marked on the air conditioner control panel in the form of a snowflake. Cooling occurs thanks to the filled refrigerant, which slowly takes heat from the room due to gassing and releases warm air outside. The power of the air conditioner should be selected on the basis of one kilowatt per 8-10 square meters, under such conditions the device will work most optimally. When using the cool mode, the most favorable temperature is considered to be 16-18 degrees, if not enough, then you can turn on the fan.

DRI

The dehumidification function is designed to change the set temperature by several degrees for active removal in the room. This mode is identical to COOL, but at very low fan speeds of the indoor unit of the split system. Combining the function with room cooling means more comfortable air. The DRI mode helps to quickly dry out the space and get rid of high humidity, it is easier to endure the heat and stop the development of mold. Some models of the air conditioner have special sensors that respond by automatically activating this function in case of a deviation from the norm. For example, there is this designation on the Gree air conditioner remote control. In this mode, it is impossible to program and maintain humidity values.

Air dehumidification occurs in this way:

The fan is active for the first 10 minutes.
The next 5 minutes are paused.
After 2 minutes, enhanced ventilation is carried out.

Do not use this mode near open sources of moisture, such as a swimming pool. In this case, other methods of dehumidification should be used.

FAN

The function is the same as a fan, it is used to change the blowing speed of the air conditioner. In this mode, the cooling and heating equipment does not function, but only air is taken from the street. Suitable for homes with central heating. In some models, you can only turn on the ventilation of the room without drawing air from the street. Manufacturers most often provide customers with a choice of 3 rotation speeds, and the mode independently selects the most suitable blowing speed.

AUTO

The function maintains the temperature in the room at 22-24 degrees, since it is considered the most comfortable for a person. The setpoint is equalized every half hour. In this mode, the temperature indicators on the display of the control panel are not highlighted.

TURBO

A mode in which air currents spread at high speed throughout the room. If it is possible to turn off the air intake from the street, you can quickly mix the air layers. Thus, the room temperature will be the same.

SLEEP

The mode is used during sleep to create a supportive environment. In this mode, the temperature changes for 6-8 hours, gradually increasing or decreasing the air temperature by 1 degree in order not to overcool or overheat the sleeping person. If the air conditioner works for heating, then the temperature rises, if for cooling, then it drops.

SWING

This mode is used to fix or change the position of the split-system blinds. Thanks to this mode, the air is distributed evenly throughout the room. On some remotes, the movement of the blinds is displayed.

AUTORESTART

This mode is not indicated on the control panel, but its presence is very important. This program works in the event of an unexpected power outage, automatically resuming the operation of the air conditioner in the specified mode when the electricity reappears.

Standard Modes

The main functions of the air conditioner are: dehumidification, cooling and heating of indoor air. The modes and their designation on the air conditioner control panel should be studied in advance in order to know the technical capabilities of the equipment. Cooling occurs due to the transition of the liquid state of the refrigerant to the gaseous state, which is carried out due to the intake of warm air from the room, and when heated, the process occurs the other way around.

Each air conditioner has basic and additional modes, which directly depend on the manufacturer and model of the device. Designation of icons on the air conditioner remote control:

Cool - cooling, looks like a snowflake.
Heat - heating, indicated by the sun on the air conditioner control panel.
Dry - dehumidification, drop image.
Fan - a fan with a corresponding pattern.
Sleep - night mode, image of an asterisk.
Lock - child protection.
Led - display backlight for working in the dark.

Special abilities

Some manufacturers, in pursuit of the consumer, are trying to improve air conditioners with additional options. Some of them become very useful as a result of operation. So, accessibility includes:

Comfort setting - is able to turn on the air conditioner in the optimal calculation mode. As a rule, in this mode, 20 degrees is considered optimal for heating, 25 degrees - for cooling the room.
Air purification - occurs thanks to built-in filters of various degrees of purification. It can be rough - it helps to remove large particles of dirt, and fine - it can even cope with pollen. In addition, the air conditioner can be equipped with filters that absorb odors. Street dust settles on filters, and the air in the room is always fresh. This designation can be found on the Samsung air conditioner control panel.
3D stream - directs vertically. The consumer uses this feature when he is afraid of catching a cold. It will be designated lfeel on the air conditioner control panel.
Ionization - saturates the room with ions with negative charges. The option is designed to improve immunity and human well-being. In the reviews of some consumers it is said that during ionization there is a feeling of a breeze. There is this designation on the remote control of the LG, Mitsubishi air conditioner in some models
Filtration and purification of air - this function is not available in all models of the air conditioner, it is carried out by means of step filters. It helps to clear the air of dust, dirt and various microorganisms, and also helps to get rid of unpleasant odors. The function is indispensable for allergy-prone people and pet owners.
Defrosting the heat exchanger - maintains the performance of the air conditioner for a long time. This mode reduces the refrigerant load during cooling during cooling.

The set of additional functions directly depends on the manufacturer and model of the split system. The designations on the Mitsubishi air conditioner panel will differ from those of other manufacturers. Before purchasing the unit, you need to consult with the seller or familiarize yourself with the options using the instructions that are included in the kit.

So, each air conditioner is equipped with the following functions: dehumidification, heating and cooling of air. In addition, each manufacturer tries to surprise the consumer and diversify the capabilities of the device. Therefore, when choosing an air conditioner, it is important to study the set of functions of the model you like.

1. Saving energy consumption

Control of "perceived temperature"

I SEE is an infrared sensor that scans the temperature at the floor surface in a segment of 150 degrees, and the control system can calculate the temperature perceived by a person.

Traditional air conditioners measure the level of air temperature at the inlet to the unit, but it is located, as a rule, high, and the temperature at the bottom of the room may not always be optimal for the user. I SEE remotely measures the temperature in the lower sector of the room, which makes this function indispensable for children's rooms.

Zone heating and cooling

I SEE - Infrared Sensor - scans the temperature at the floor surface in a selectable area and smoothes the area where the temperature is significantly different from the target values. This mode zonal air-conditioning the rooms, thus providing comfort and reducing energy consumption.

Econo Cool mode

Increasing the set temperature by 2C during cooling reduces energy consumption by 20%. And so that the user does not pay attention to the increase in temperature and loss of comfort, the air conditioner provides a special algorithm for the operation of the shutters.

The air is fed vertically, then horizontally down, in turn. The microprocessor calculates and sets the intervals and duration of the cycles, taking into account the temperature of the evaporator and the temperature in the room at the moment.

I Feel Mode

If you do not know the comfortable temperature level for a person, the user often sets a very low temperature on the remote control - 16C in summer, and 26C and higher in winter. "I Feel" by means of a microprocessor independently determines the optimum temperature for the user, self-learning, taking into account the previous parameters.

Performance limiting mode

An external signal can limit system performance and, as a result, power consumption. In this mode, the power consumption is reduced to the value set by switches SW7-1, SW7-2 located on the control board of the outdoor unit:

0% (off) - 50% -75% -100% (no limit).

2. Appearance

Decorative panels

Elements of decorative panels made of plastic and metal are painted in a bright white color, appropriate in the color schemes of any interiors.

Automatic damper

The damper is horizontal, it closes automatically when it is turned off. Completely closes the opening from which the air and air distribution system parts come.

3. Air purification

Double plasma cleaning

Dual Plasma - filtration system - works on the principle of disintegration of large molecules in an electric field, ionization of molecules, and neutralization of radicals with a catalyst. Due to this, the system captures micro- and nano-dust particles and aromatic compounds.

Filtration

The air is cleared of dust and pollutants, creating a healthy atmosphere in the home.

Antioxidant filter

The filter with a catalytic coating from the flavonoid group reduces free radicals to chemically inactive molecules. The substance itself is not consumed in this case. Due to this, the filter works for up to 10 years.

Mitsubishi Electric has introduced an antioxidant into ceramic fibers embedded in a polypropylene mesh, so the filter is easy to clean and wipe, unlike filters in which catalysts are applied to polypropylene in the form of a film that quickly erases during operation.

Oil catch filter

Retains oil suspensions and prevents oil from entering the unit.

Air inflow

Fresh air enters the room, which improves its composition and quality.

Enzyme Allergy Filter

Eliminates bacteria and dust. In this case, allergens do not accumulate in the filter, decomposing catalysts to harmless compounds.

Extended life filter

The polypropylene filter fibers are specially “activated” to filter and extend the service interval.

High efficiency filter

Additionally filters the air and retains small particles that have passed through the pre-filter.

Filter check reminder

At the selected intervals, a reminder appears that the filter needs to be cleaned.

4. Air distribution system

Swing horizontal vane

The presence of this mode allows you to evenly distribute the air throughout the room.

Swing vertical guides

This mode supplies air evenly to all areas of the room.

High ceiling rooms

For them, an increase in the flow rate and air flow rate at the outlet of the indoor unit is provided in order to achieve the desired air mobility at the bottom of the room.

Low-ceilinged rooms

For them, a decrease in the flow rate and air flow rate at the outlet of the indoor unit is provided in order to achieve a small air mobility in the working area of the room.

Automatic fan speed

When approaching certain temperature parameters, the fan speed in the indoor unit decreases automatically.

Powerful air flow

For air conditioning a large area or rooms with complex shapes, a wide air flow is required (150 degrees for heating, 100 degrees for cooling. "Wide Swing" button on the remote control with a choice of the air supply method from seven options) and a long flow length ("Long Airflow" button , when pressed, the length of the air stream increases to 12 m).

5. Comfort and convenience

24 hour weekly timer

Organizes automatic operation of the air conditioner during the week. For each day of the week, there are 4 on / off switches and a change in the set temperature.

12 hour timer

The timer is set for the next 12 hours. The discreteness of its installation is 10 minutes.

I Save mode

One push of a button puts the system into a reduced power consumption mode. It is convenient to use when the user goes to bed and switches the air conditioner to heat the air up to 18C with the “I Save” button. In the morning, the same button will move the system to the previous setting at 22C.

This function is also useful when used in an economical standby heating, for example, in a country house. Models MSZ-GE / MUZ-GE are able to maintain a standby temperature of + 10C.

Automatic mode change

The system automatically switches between cooling and heating modes to maintain the set temperatures.

Autostart

The air conditioner returns to the previous set mode automatically if, for example, the power was turned off earlier.

Cooling at low temperature

The outdoor unit control changes the fan speed in order to stabilize the condensing pressure of the refrigerant, this allows the room to be cooled when the outdoor temperature is low.

"Night" mode (external block)

Reduces the noise level of the outdoor unit. It should be noted that performance in this mode is also reduced.

Limiting electricity consumption

A DIP switch on the control board of the outdoor unit sets the power consumption limit.

Fixing the operating mode

The DIP switch on the control board of the outdoor unit can fix the operating mode. For example, in summer, users will not be able to turn on the air conditioner for heating the air, or in winter for cooling.

6. Management and control

PAR-21MAA or PAR-30MAA control panel

It is possible to connect these consoles with a variety of functions, a built-in weekly timer and a Russified interface.

Central on-off

Air conditioners are connected to the central controller MAC-821SC-E, which is responsible for turning on / off and indicating the status of groups (no more than 8).

Group management

One remote control can set operating parameters simultaneously for several (up to 16) air conditioning systems.

Connecting to MXZ Multisystems

The indoor unit can be used as an integral part of inverter multisystems based on MXZ outdoor units.

Synchronous multisystem

Two to four (depending on modification) indoor units can be connected to one outdoor unit. Indoor units in this system will work synchronously. This multisystem is ideal for large mono-volume rooms.

M-NET signal line

The described devices can be connected to the signal line of multizone controllers (M-NET controllers), for example, the AG-150A controller.

Rotation, auxiliary system activation and redundancy

Rotation and redundancy: 1. The main and standby systems alternately operate in a given interval, equalizing the operating time. 2. If the operating system fails, the reserve is switched on.

Additional system: 1. When the temperature rises and exceeds the set value by the set value (4, 6, 8C), the backup system is activated in addition to the operating main one. 2. When the set temperature drops by 4C, the backup is disabled. 3. This function only works in redundant cooling mode with active rotation function.

Auto-correct connections function

Determines the correspondence of the connections of freon wires and signal lines. If there is a discrepancy, the correctness is automatically restored - programmatically. It takes 10-30 minutes to check the correctness.

* the function is used only in cooling mode when the outside temperature is above 0С. Sometimes the mode cannot determine the correctness - with closed valves, refrigerant leakage, expansion valves malfunction, etc.

Built-in drain pump

Organizes the rise of the drainage line, effectively drains condensate.

Collecting refrigerant to the outdoor unit

For condensation of freon from the main line to the external unit (when dismantling or transferring the system), the "Collect refrigerant" button is provided.

Flange connections

Simplify installation without requiring freon wire soldering.

7. Service

Collapsible body

Elements of the air distribution system can be removed for cleaning without using special tools. Cleaning the interior contributes to cleanliness and comfort in the room and increases energy efficiency.

Self-diagnosis

The malfunction code is shown on the display of the remote control, which simplifies the diagnosis.

Fault code archive

When the system is operating, fault codes are recorded in non-volatile memory and can be checked during diagnostics.

Anti-mold drainage pan

The drain pan is covered with a composition that prevents the growth and growth of mold.

SPLIT-TYPE AIR CONDITIONERS OPERATING INSTRUCTIONS Bedienungsanleitung OPERATING INSTRUCTIONS INDOOR UNIT GEBRUIKSAANWIJZING Dansk För kunder För att använda enheten på rätt och säkert sätt sätt tasa denna bruksan in tasa denna bruksan Svenska Sat ›n al› c ›lar için Bu birimi do¤ru ve güvenli olarak çal› ﬂ t ›rmak için, kullanmadan önce bu i ﬂ letme talimatlar› n ›mutlaka okuyun. USER MANUAL Português Til kunden Læs denne brugsanvisning før brugen så korrekt og forsvarlig anvendelse af klimaanlægget sikres. ‹Fi LETME TAL‹ MATLARI ∂ÏÏËÓÈÎ¿ Para os clientes Para utilizar esta unidade correctamente, certifique-se de que lê estas instruções de operação antes da utilização. BRUKSANVISNING Italiano Ô ‰ ËÁÈÒÓ ÚÈÓ ¯Ú ‹. BRUGSANVISNING Español Per gli utenti Per utilizzare correttamente quest'unità, leggere questo libretto d'istruzioni attentamente e per intero. INSTRUÇÕES DE OPERAÇÃO Nederlands Para los clientes Para emplear correctamente este aparato y por razones de seguridad debe leer este manual de instrucciones de manejo antes de su utilización. √ ¢ ∏ ° π∂ ™ §∂π∆√Àƒ ° π∞ ™ Français Voor de klant Om dit apparaat op de juiste manier en veilig te gebruiken, dient u eerst deze gebruiksaanwijzing aandachtig door te lezen. LIBRETTO D'ISTRUZIONI Deutsch A l'attention des clients Pour avoir la certitude d'utiliser cet appareil correctement et en toute sécurité, veuillez lire attentivement cette notice d'instructions avant de mettre l'appareil en fonction. MANUAL DE INSTRUCCIONES English Für Kunden Um diese Einheit richtig und sicher zu verwenden, unbedingt diese Bedienungsanleitung vor der Inbetriebnahme durchlesen. NOTICE D'UTILIZATION MSZ-FA25VA MSZ-FA35VA For customers To use this unit correctly and safely, be sure to read this operating instructions before use. For Users To ensure correct and safe use of the appliance, please read this manual carefully before using it. Türkçe English CONTENTS PRECAUTIONS ............................................. .................................................. ......................................... 178 NAMES OF INDIVIDUAL PARTS OF THE APPLIANCE ... .................................................. .................................................. ......... 179 PREPARING THE APPLIANCE FOR OPERATION ............ .................................................. .................................................. ... 180 AUTOMATIC MODE CHANGEOVER ... OPERATION IN AUTO MODE .................................... .................. 182 MANUAL MODE CONTROL (COOLING, DRYING, HEATING) ..................... ........................................... 183 i-see MODE DESCRIPTION ( “I see”) ... ADJUSTING THE FEEL TEMPERATURE .................................... 183 ZONE SETTING AIR CONDITIONING USING i-see SENSOR ........................................... ....... 184 AIR CONDITIONING AREA PARAMETERS ....................................... .................................................. ...................... 185 ADJUSTING THE AIRFLOW SPEED AND DIRECTION ..................... .......................................... 185 PLASMA DUO MODE ) ... PLASMA COOLING AND PLASMA AIR CLEANING ... 186 ENERGY SAVING COOLING FUNCTION (ECO NO COOL) ............................................... .................... 187 TIMER OPERATION (ON / OFF TIMER) ................... .............................. 187 WHEN YOU ARE NOT GOING TO USE THE AIR CONDITIONER FOR A LONG TIME ........... ....................... 187 CARE OF THE APPLIANCE ....................... .................................................. .................................................. .............................. 187 CLEANING THE FRONT PANEL, HEAT EXCHANGE UNIT AND FAN ........... .................................................. .... 188 CLEANING THE AIR FILTER .......................................... .................................................. ..................................... 188 CLEANING THE PLASMA CLEANING / AIR CLEANING FILTERS ... .......................................... 189 REPLACING THE PLASMA REFRIGERATING FILTER (CERAMIC REFRIGERANT FILTER) .................... 189 CLEANING THE AIR OUTLET INTERCOOLING AND FAN OF THE INDOOR UNIT ................ 190 BEFORE CONTACTING THE SERVICE SERVICE, CHECK THE FOLLOWING AGAIN .................. ........................ 191 IF YOU THINK THAT THE APPLIANCE IS DEFECTIVE .................. .................................................. ................................. 191 INSTALLATION, HANDLING AND INSPECTION OF THE APPLIANCE .......... .................................................. ....................................... 193 SPECIFICATIONS. .................................................. .................................................. ............................ 193 SAFETY PRECAUTIONS Due to the use of rotating parts in the construction of this product, as well as parts that could lead to electric shock, be sure to read this Safety Precautions section before using the appliance. Since the cautionary information in this section concerns your safety, be sure to follow the instructions provided. Symbols and their meanings WARNING: Improper handling is a serious health hazard and is very likely to result in death or serious injury, etc. CAUTION: Improper handling of the device poses a serious health hazard, depending on the circumstances. The color of the label affixed to the instrument is indicated in parentheses. : Strictly prohibited. : Follow the instructions carefully. (Black): Do not insert fingers or sticks, etc. (Black): Do not step on the indoor / outdoor unit or place any objects on them. : Risk of electric shock. Be careful. : Be sure to disconnect the power plug from the electrical outlet. : Be sure to turn off the power supply. After reading, keep this manual together with the instrument installation manual in an easily accessible place and use it for reference. HOUSING FRONT PANEL AIR VOLTAGE HOUSING HOUSING 178 This air conditioner is NOT INTENDED for use by unattended children, the elderly, or the sick. WARNING Do not use an intermediate connection in the power cord or use an extension cord. Do not connect multiple electrical appliances to the same AC power source. Loose connections, insufficient insulation, higher voltage connections, etc. may result in fire or electric shock. Do not cut or modify the power cord in any way. Do not place heavy objects on the power cord, cut it or modify it in any way. Doing so may damage the power cord and result in fire or electric shock. Do not turn on / off the mains circuit breaker or disconnect / connect the power plug while the appliance is in operation. Doing so may result in a fire due to sparks, etc. Be sure to turn off the AC breaker or disconnect the power plug from the wall outlet after turning off the indoor unit with the remote controller. Protect your skin from prolonged exposure to cold air. This is harmful to your health. Installation of this device by the user is prohibited. Improper repair and handling may result in fire, electric shock, injury from falling, fluid leakage, etc. Please contact your dealer. Do not insert fingers, sticks, etc. into the air intake / air outlets. As the fan blades rotate at high speed, injury may result. Young children should be supervised to ensure that they do not play with the air conditioner. If any abnormal symptoms (burning smell, etc.) appear, stop the air conditioner immediately and unplug the power cord or turn off the AC breaker. Continued use of the instrument under abnormal conditions may result in fire, breakdown, etc. In this case, you need to contact your dealer. It is prohibited to carry out repairs and move the air conditioner by the user. Improper repair and handling may result in fire, electric shock, injury from falling, fluid leakage, etc. Please contact your dealer. If the power cord is damaged, the manufacturer or his service agent must replace it to avoid risk. CAUTION Meaning of Symbols Used in the Text of the Manual Location of Safety Symbols on the Unit When replacing the air filter, do not touch the metal parts of the indoor unit. This could result in injury. Do not use insecticides or flammable aerosols. This could result in a fire or deformation of the instrument case. Protect pets and plants from direct exposure to air currents. It is harmful to the health of animals and plants. Do not leave this appliance on a damaged installation base. The device may fall and cause injury. When servicing the air conditioner, do not stand on unstable structures, benches, etc. If you fall, it may cause injury, etc. Do not pull on the power cord. The wire core may break and cause a fire. Do not charge, disassemble or dispose of batteries in a fire. This could cause fluid leakage, fire, or battery explosion. Do not use the device for a long time in high humidity conditions, for example, in a room with an open window or door. If the unit is operated for a long time in cooling mode in a room with high humidity (80% RH or higher), moisture condensed in the air conditioner may drip. This could damage furniture, etc. Do not use the device in cooling mode at low outdoor temperatures (less than -10 ° C). If the appliance is used in cooling mode at a low outdoor temperature (less than -10 ° C), moisture condensed in the air conditioner may drip. This could damage furniture, etc. PRECAUTIONS CAUTION Do not use the device for other purposes. Do not use this air conditioner for storing precision instruments, food, animals, plants or art. This may adversely affect their quality, etc. Do not place a stove or similar equipment in a direct air flow area. This can lead to incomplete combustion of flammable substances. Before cleaning the appliance, turn it off and unplug the power cord or turn off the mains breaker. As the fan blades rotate at high speed, injury may result. If you are not going to use the air conditioner for a long time, disconnect the power plug from the wall outlet or turn off the mains breaker. Otherwise, dirt may accumulate and this may result in a fire. When replacing batteries, replace 2 old batteries with new batteries of the same type. Using an old battery together with a new one may cause heat generation, fluid leakage, or battery explosion. If battery fluid gets on your skin or clothing, rinse thoroughly in clean water. If liquid from batteries gets in your eyes, rinse them thoroughly in clean water and consult a doctor immediately. Ventilate the area where the appliance is used at the same time as a stove or similar equipment. This can lead to a lack of oxygen. Do not touch the switches with wet hands. Doing so could result in electric shock. Do not wash the air conditioner with water. Water can enter the interior of the appliance and damage the insulation. Doing so could result in electric shock. Do not step on the indoor / outdoor unit or place any object on it. If you fall or a foreign object falls, it may cause injury, etc. NAMES OF INDIVIDUAL PARTS Indoor unit Air inlet PLASMA AIR CLEANING filter Heat exchanger Anti-mold air filter Air outlets Vertical damper WARNING Contact your dealer to install the air conditioner. Fan grille Horizontal vane Remote control Fan Automatic front panel When the appliance is started up, the front panel automatically opens for air intake. When the device is finished, the front panel closes automatically. Display Control panel (When the front panel is open) POWER indicator PLASMA / WASH indicator AREA indicator Automatic front panel Emergency air conditioner control button<Открыта> <Закрыта> When installing the unit Front panel Reset switch WASH (cleaning) i-see sensor Remote control signal reception area Outdoor unit MUZ-FA25 / 35VA (H) Air inlet-QUICK CLEAN KIT (For indoor unit) (back and side) CAUTION Prohibited Installing the appliance in locations where flammable gas can escape. An explosion may result if flammable gas leaks and accumulates near the appliance. Ground the instrument. Do not connect ground wires to gas or water pipes, lightning conductors, or telephone ground cables. Improper grounding of the appliance can result in electric shock. Install an earth leakage breaker depending on the installation location of the air conditioner (places with high humidity, etc.). If an earth leakage breaker is not installed, an electric shock may result. Be sure to properly drain moisture from the air conditioner. If the drainage system is wired incorrectly, water may drip from the appliance. This could damage the furniture. Pipes Brush Drain hose Nozzle Air outlet air outlet Drain outlet Universal adapter 179 NAMES OF PARTS OF THE APPLIANCE Remote control PREPARATION OF THE APPLIANCE FOR OPERATION Autostart function ■ Signal emitter These air conditioners are equipped with an autostart function. If you do not want to use this function, please contact your service representative as you need to change the settings of this unit. What is Auto Start Function ... When the indoor unit is operated by the remote controller, the operating mode, set temperature and fan speed are memorized in the unit. If a power failure occurs or the power is turned off during operation, the autostart function automatically sets the instrument to operate in the same mode that was set using the remote control before the power was turned off. (For details, see page 182.) Display sector ON / OFF (run / stop) button Outdoor unit Temperature control buttons ■ Plug the power cord into a power outlet and / or turn on the mains breaker. WARNING: Remove dirt from the power plug and insert the plug all the way. Dirt adhering to the plug or loosening the plug may cause fire or electric shock. Remote control ■ ■ Slide the front cover. Use only the remote control supplied with the appliance. Do not use other remote controls. Set the slide switch in the remote controller to the desired position according to the location of the indoor unit. If the switch is not set correctly, the air conditioner may not work properly. Slide switch (This diagram shows an overall view of the remote control.) Fan speed control button Operating mode selection button ECONO COOL button PLASMA button AREA button WIDE VANE button (Vertical vane button) Off timer button On timer button TIME buttons (time setting) Forward button Back button CLOCK button (clock setting) i-see button RESET button 180 Setting position Slide switch position Display on remote control Left Center Right Where is the indoor unit installed in your room? Installed on the left if the distance is less than 50 cm. (Left) (Center) Installed on the right if the distance is less than 50 cm. (Right) Is the indoor unit installed on the right, left or center? Flap position control button (Horizontal vane button) * If the indoor unit is installed more than 50 cm from a side wall, cabinet or other adjacent object, set the slide switch to the center position. PREPARING THE APPLIANCE FOR OPERATION Remote control How to insert the batteries and set the current time 1 Remove the front cover and insert the batteries. Then replace the cover. Insert the negative end of the battery first. Make sure the polarity is correct. Insert the negative end of the battery first. 2 Press the RESET button. Press with a pointed stick. Handling the remote controller The signal range is approximately 6 meters when the remote controller is pointed at the front panel of the indoor unit. When a button on the remote controller is pressed, the indoor unit emits one or two short beeps. If you do not hear a beep, press the button again. Be careful when handling the remote control. If the remote control is dropped or if it gets inside water, it may be damaged. When installed in a wall holder, etc. Install the remote controller holder ON / OFF can be heard in a place where when the button is pressed, the characteristic sound of the remote controller being received by the indoor unit is heard. How to install / remove the remote control from the holder Installation: Lower the remote control into the holder. Removal: Lift it out of the holder. When the remote controller cannot be used (emergency operation of the air conditioner) When the batteries of the remote controller are low or malfunctioning, the EMERGENCY OPERATION button allows emergency operation of the unit. 1 Press the EMERGENCY OPERATION button. When the EMERGENCY OPERATION button is pressed repeatedly, the air conditioner switches to EMERGENCY COOL MODE, then to EMERGENCY HEAT MODE and then to STOP MODE. However, if the EMERGENCY OPERATION button is pressed once, the air conditioner will operate in test run mode for 30 minutes, after which the operation will go to EMERGENCY MODE. E.O. SW Remote controller holder If you do not press the RESET button, the air conditioner may not work properly. Do not press the RESET button too hard. 3 Press the CLOCK setting button. Press with a pointed stick. 4 Press TIME SET (Forward) (Hours) and (Back) (Minutes) to set the current time. Each time the button is pressed, the set time increases by 1 minute, and each time the button is pressed, it decreases by 1 minute. Longer pressing of these buttons will increase / decrease the set time by 10 minutes. 5 Press the CLOCK button again and close the front cover. Dry-type batteries ■ Battery replacement instructions In the following cases, replace the batteries with new alkaline batteries (AAA type): · When the indoor unit does not respond to signals from the remote controller. · When the display on the remote control is dim. · When, by pressing a button on the remote control, all display indications first light up and then immediately disappear on the screen. Do not use manganese batteries. Using them may cause malfunctions in the remote control. The alkaline battery has a life of approximately 1 year. However, batteries with an expiration date will fail faster. The recommended battery life (year / month) is indicated on the end of the battery. To prevent liquid from leaking from the batteries, remove them from the remote control when you are not going to use the remote control for a long time. CAUTION: If battery fluid gets on your skin or clothing, rinse thoroughly in clean water. If liquid from batteries gets in your eyes, rinse them thoroughly in clean water and consult a doctor immediately. Do not use rechargeable batteries. Replace 2 old batteries with new batteries of the same type. Dispose of old batteries in an environmentally responsible manner. Operation indicator light EMERGENCY COOLING EMERGENCY HEATING STOP NOTE: This indicates that the air conditioner is operating in EMERGENCY OPERATION. AREA mode is not available in EMERGENCY OPERATION mode. 2 WASH reset NOTE: Three seconds after pressing the EMERGENCY OPERATION switch, the front panel will automatically move forward. Close the front panel manually before moving it. To stop the emergency control of the device, press the EMERGENCY OPERATION button once (from EMERGENCY HEATING mode) or twice (from EMERGENCY COOLING mode). More information on EMERGENCY MODE is provided below. The temperature control mechanism does not work for 30 minutes during the test run, and the device runs continuously. During a test run, the fan speed is set to “High” and after 30 minutes it switches to “Medium”. Operation COOL HEAT Set temp 24 ° C 24 ° C Fan speed Medium Medium Horizontal vane Auto Auto Vertical vane Straight Straight The following illustrations show how the operation indicator light located on the indoor unit signals the operating mode. 181 AUTOMATIC MODE CHANGEOVER ... AUTO OPERATION The automatic cooling / heating changeover system ensures easy operation and year-round air conditioning. After setting the desired temperature, the device automatically switches between cooling and heating modes depending on the room temperature. In addition, the outdoor unit fan speed control provides cooling when the ambient temperature is below -10 ° C. To select AUTO mode: 1 Press the e button 2 Select the mode. (AUTO) by pressing the MODE button. To stop the device: ON / OFF Press the button. After you have set the operating mode once, when you turn ON / OFF again, the device will turn on in the previously set mode when you press the button. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ These devices are equipped with an auto-start function. After turning on the power, the air conditioner will automatically start operating in the mode that was set with the remote controller before turning off the power. If the unit was turned off with the remote control before turning off the power, it will remain off even after turning on the power. If the unit is in “AUTO” mode before the power failure, the operating mode (COOL, DRY or HEAT) is not memorized. When the power is turned off, the device detects the operating mode based on the initial room temperature when restarted, and starts operating again. ON / OFF Each time this button is pressed, the operation modes are switched in the following sequence: (AUTO) → (COOL) → (DRY) → (HEAT) The set temperature is also shown on the display of the wireless controller. ■ Description of the auto start function When it is necessary to change the set temperature: Information on multi-system air conditioners A multi-system air conditioner allows two or more indoor units to be connected to one outdoor unit. Depending on the power, two or more devices can work at the same time. Attempting to operate two or more indoor units (one in cooling mode and one in heating mode) connected to the same outdoor unit at the same time selects the operating mode that starts earlier. The rest of the internal devices that start working later will not be able to work in the specified modes. Their operating status will be signaled by a corresponding indication. (See the operation mode indicator table below.) In this case, please set all indoor units to the same operating mode. When the indoor unit starts operating during the defrosting operation of the outdoor unit, it takes some time (maximum 10 minutes) before the air conditioner blows out warm air. When operating in heating mode, the indoor unit may heat up even if it is not currently operating. The sound of refrigerant flowing in the pipes can also be heard. This is not a malfunction. These phenomena are due to the constant movement of refrigerant through the indoor unit. Indoor unit display The operation indicator located on the right side of the indoor unit indicates its operating status. TOO WARM Press the button to lower the set temperature. Pressing this button decreases the set temperature by approximately 1 ° C. Lights up Flashes TOO COOL Press the button to raise the set temperature. Pressing this button increases the set temperature by approximately 1 ° C. Description of switching modes “AUTO CHANGEOVER” (1) Initial mode 1 When starting operation in (AUTO) mode after turning off the unit; If the room temperature is higher than the set one, the operation starts in COOL mode. If the room temperature is equal to or lower than the set temperature, the operation starts in HEAT mode. (2) Mode change 1 The COOL mode switches to the HEAT mode if the room temperature is 2 degrees below the set temperature for 15 minutes. 2 Switching from HEAT mode to COOL mode occurs if the room temperature is 2 degrees higher than the set temperature for 15 minutes. NOTES: If two or more indoor units are interconnected, sometimes it may not be possible to switch the unit in AUTO mode to another operation mode (COOL ↔ HEAT), the unit goes into standby state. For details on multiple A / C systems, see the right. 182 POWER: Lights up when running and the timer is on. PLASMA / WASH: AREA: Please refer to the page for explanation of this function. Off Operation indicator light. Display. Operation status. Shows the standby status. Please refer to “Information regarding multi-system air conditioners”. (See above) MANUAL CONTROL OF FUNCTIONS (COOL, DRY, HEAT) To select COOL, DRY or HEAT modes: 1 DESCRIPTION OF THE i-SEE MODE ... TEMPERATURES The air conditioner adjusts the temperature you feel (“perceived temperature”) according to the room temperature as well as the floor / wall temperatures (“i-see mode”). To regulate the air temperature rather than the perceived temperature, turn off i-see mode. ON / OFF Press button 2. Select the operating mode by pressing the button. To activate the i-see mode: MODE ■. Each time this button is pressed, the operating modes are switched in the following sequence: (AUTO) → (COOL - cooling) → (DRY - dry) → (HEAT - heating) NOTE: The i-see operating mode is activated when the remote control is used for the first time after replacing the batteries or after resetting it. To stop the device: ■ To turn off the i-see mode: ON / OFF Press the button In MANUAL COOL or MANUAL HEAT mode, press the i-see button with a thin object. ... ■ After you have set the operating mode once, when you turn ON / OFF again, the device will turn on in the previously set mode by pressing the button. When operating the device with a thin object, press the i-see button again. NOTE: When you turn off the air conditioner while the i-see mode is on, the next time you turn on the air conditioner, the i-see mode will be turned on. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ When the set temperature needs to be changed: TOO WARM Press the button to lower the set temperature. Pressing this button decreases the set temperature by approximately 1 ° C. TOO COOL Press the button to increase the set temperature. Pressing this button increases the set temperature by approximately 1 ° C. During DRY operation Temperature control (set temperature) is not possible. When the air conditioner is operating in this mode, the room temperature decreases slightly. If the air conditioner does not cool or heat well ... In some cases, when the fan speed is set to Low or AUTO, the air conditioner may not cool or heat the air well. In this case, set Med. (medium) or high fan speed. Change the fan speed. Fan speed: Low or AUTO Fan speed: Med. (medium) or Upper (high) i-see mode Sensors constantly measure the air and floor / wall temperatures to automatically adjust the set temperature by evaluating the temperature felt by the person in the room (“perceived temperature”). Benefits The air in the room is quickly conditioned to a comfortable temperature. The room does not get either cold or hot, even with prolonged operation of the air conditioner. The air conditioner does not overcool or overheat, that is, you save energy. Room air temperature Wall temperature Humidity Approx. 20% Approx. 30% Approx. 50% Floor temperature Sensible temperature Sensible temperature components Wall / floor temperatures Room temperature / air temperature 183 i-see sensor With AREA off (zone conditioning) sensor sensitivity range i -see (“I see”) depends on the installation location of the air conditioner. Left installation Center installation Right installation Sensitivity range illustration Right Center Left Slider switch positions are described on page 180. When AREA (zone conditioning) is on, the i-see sensor moves in a range of 150 degrees and reads the floor / wall temperature in 3 zones (left, right, center). Consequently, the temperature readings may differ from those measured with conventional thermometers, depending on the temperature distribution or conditions on the floor and / or wall. After maintenance, install the front panel correctly to accurately measure the floor / wall temperatures. Indoor unit display Sensor direction Approx. 150 degrees AIR CONDITIONING ZONE SETTING USING i-see SENSOR NOTE Installation site Horizontal airflow direction change i-see MODE DESCRIPTION ... FEEL TEMPERATURE REGULATION If AREA mode is set to AUTO when heating, the indoor unit automatically blows warm air to the area of the room with the minimum floor / wall temperature. If the AREA (zone conditioning) mode is set to AUTO when cooling, the indoor unit automatically blows cold air to the area of the room with the maximum floor / wall temperature. Example) When heating Day Night Warm zone Cold zone The indoor unit blows warm air to the cold zone of the room. Indication of AREA mode (zone conditioning) The direction of the horizontal air flow is changed if the i-see sensor detects a temperature difference of 3 ° C. When the AREA (zone conditioning) mode is set to AUTO, the left and right lamps will light up when the room temperature is evenly distributed. To reset the parameters of the AREA mode: In order to ensure a uniform climate in the room, the AREA mode (zone conditioning) sets the direction of the horizontal air flow, which changes automatically depending on the readings of the i-see sensor, which determines the floor / wall temperature. By quickly conditioning the desired zone, the level of comfort is also increased and energy is saved. To set the AREA mode parameters: ■ Press the button. Each time the button is pressed, the air conditioning zone changes in the following order: (AUTO) → (Left) → → (Right) → Cancel The i-see sensor moves periodically to measure the temperature of the floor and wall. NOTE: AREA mode parameters can only be set in i-see mode. (See page 183, 184) When the AREA (zone conditioning) mode is exited, the vertical vane will return to the preset position before the AREA (zone conditioning) mode was selected. The horizontal airflow direction (), including the horizontal SWING mode, is not set when the AREA (zone conditioning) mode is on. 184 ■ Press the button to highlight “Cancel”. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ pressing the button while the AREA mode parameter is set, the parameter is reset. Indoor unit installation location and air-conditioning area Left-side setup RIGHT RIGHT Center-side setup RIGHT ROOM setup Right-hand setup RIGHT ROOM Set the slide switch in the remote controller to the desired position according to the location of the indoor unit. If the switch is not set correctly, the air conditioner may not work properly. (see page 180.) AIR-CONDITIONING AREA PARAMETERS For air-conditioning the entire room The horizontal airflow direction and display of the indoor unit are switched according to the room temperature (floor / wall). Press to select AUTO. Horizontal vane movement For air conditioning mainly on the right side of the room Press to select the RIGHT zone. COOL / DRY i-see sensor operation Indoor unit display Center mounted When the air is warming up ... Horizontal Very low airflow position Horizontal position The damper is automatically set to horizontal position. The damper does not swing. NOTE: Air is blown up and then to position (1). Select (SWING) with the VANE button to permanently change the direction of the airflow. Installed on the left Installed on the right After about 0.5-1 hour or AREA or AIRFLOW SPEED AND DIRECTION MANUAL (manual) Horizontal direction airflow control range. The vertical airflow direction is the same as the setting on the remote control. (The horizontal airflow direction is determined by this range.) You can select the AIRFLOW speed and direction as desired. ■ Press the FAN button to change the AIRFLOW speed. Each time the button is pressed, the fan speed changes in the following sequence: (Low) → (Med. - medium) → (High) → (Very high) → (AUTO - AUTO) (Very high) for faster Use the space cooling / heating setting. If the sound of the air conditioner running disturbs your sleep, use the (Low) setting. Press the button to change the vertical VANE AIRFLOW direction. Each time the button is pressed, the angle of the horizontal vane position changes in the following sequence: (1) → (2) → (3) → (4) → (SWING) → (AUTO) SWING OPERATION swing allows the air flow to penetrate into all corners of the room. Recommended horizontal vane positions (AUTO) how Use the COOL standard position. DRY Use positions (1) in HEAT COOL or DRY mode to adjust the damper position to your liking, and positions (2) to (4) in HEAT mode. 1 SWING ■ HEAT At the start of heating mode AUTO Remote control button Remote control display For air conditioning mainly on the left side of the room Press to select the LEFT zone. Position (4) Immediately after the air conditioner starts operating, the flap remains in the horizontal position. When the air from the indoor unit is warm enough, the flap moves to position (4). After the air conditioner starts operating with indoor air warming up, the fan speed gradually increases until the set speed is reached. At the start of heating operation Position (1) When the airflow direction is set to position (2), (3) or (4) When the air is warming up ... Horizontal position Very weak airflow Set position After operating for about one hour, the air conditioner automatically sets the damper to position (1). Press the VANE button again to change the airflow direction to the original setting. The damper does not move to the straight down position in COOL and DRY modes. Immediately after starting the air conditioner, the flap remains in the horizontal position. After the air from the indoor unit has warmed up, the flap is set to the position corresponding to the set air flow direction. After the air conditioner starts operating with indoor air warming up, the fan speed gradually increases until the set speed is reached. The damper periodically moves between positions (1) and (4). The damper stops briefly at positions (1) and (4). The damper periodically moves between positions (2) and (4). The damper stops briefly at positions (2) and (4). (1) (2) (4) (4) NOTE: Adjust the AIR FLOW airflow direction using the remote controller. Manual movement of the horizontal and vertical vanes may result in damage. When the operating mode is changed in the “(AUTO)” mode, the horizontal guide is automatically moved to the position required for each mode. 2 3 4 185 ADJUSTING AIRFLOW SPEED AND DIRECTION PLASMA DUO MODE ... PLASMA REFRIGERATION AND PLASMA AIR CLEANING To change the direction of the air flow so that it does not come directly onto you. PLASMA mode is used when you want to eliminate unpleasant odors (for example, the smell of tobacco smoke) or purify the air in the room (remove dust, pollen and other allergens). To change the airflow direction When to use this function? Pressing the VANE button for 2 seconds or more will reverse the horizontal vane and move it to the horizontal position. Use this function if you do not want the air from the indoor unit to blow directly onto you. Depending on the shape of the room, air may be blown directly onto you. Press the VANE button again to return the damper to the previously set position. Horizontal position COOL / DRY mode HEAT mode The air conditioner starts to cool or dry the air about 3 minutes after the flap is set to the horizontal position. When the button is pressed again VANE, the flap will return to the previously set position and the air conditioner will start operating in cooling or drying mode after about 3 minutes. The air conditioner starts heating the air about 3 minutes after the damper is set to the horizontal position. Sometimes the air above the floor may not warm up. For underfloor heating, set the horizontal flap to (AUTO) or downward. When the VANE button is pressed again, the flap will return to the previously set position and the air conditioner will start operating in heating mode after about 3 minutes. NOTE: VANE If you use the button to change the direction of the air flow so that it does not hit directly on you, the compressor will stop for about 3 minutes even when the air conditioner is running. The air conditioner operates at reduced airflow until the compressor restarts. ■ Press the button to change the horizontal AIRFLOW direction. Each time the button is pressed, the angle of the VERTICAL FLAP changes in the following order: (SWING) SWING OPERATION Using the swing mode allows the air flow to penetrate all corners of the room. 186 To turn on the PLASMA mode: ■ Select the PLASMA mode by pressing the button while the air conditioner is running. Each time the button is pressed, the PLASMA mode changes in the following order: → → → Cancel (The PLASMA mode icon will disappear.) The indoor unit display turns on the PLASMA / WASH indicator and turns on the PLASMA CLEANING and / or PLASMA CLEANING unit. Set the desired airflow rate. To turn off PLASMA mode: ■ Select “Cancel” by pressing the button while the air conditioner is running. When After setting the PLASMA mode, it will turn on every time the air conditioner is turned on until you select “Cancel” with the button. Description of the PLASMA mode:< функция>Included PLASMA CLEANING PLASMA AIR CLEANING. and< функция>PLASMA DEODORIZING mode purifies the indoor air by absorbing and decomposing odor-producing particles and gases such as formaldehyde. function>< Операция ПЛАЗМЕННОЙ ОЧИСТКИ очищает воздух в комнате за счет поглощения частиц табачного дыма и таких аллергенов как пыльца и домашняя пыль. ПРИМЕЧАНИЕ: Угарный газ, выделяемый при курении сигарет, не удаляется операциями режима PLASMA. Для поступления свежего воздуха время от времени открывайте окна. При работе кондиционера в режиме PLASMA Вы можете ощущать запах озона, который генерируется в небольших количествах блоками фильтров ПЛАЗМЕННОГО ОСВЕЖЕНИЯ/ОЧИСТКИ ВОЗДУХА. Это не неисправность. При работе кондиционера в режиме PLASMA можно услышать слабое шипение. Это звук плазменных разрядов, а не неисправность. Никогда не дотрагивайтесь до фильтра ПЛАЗМЕННОГО ОСВЕЖЕНИЯ/ОЧИСТКИ ВОЗДУХА во время работы кондиционера. Несмотря на то, что блоки фильтров разработаны с учетом требований техники безопасности, они могут стать причиной травмы, поскольку являются источниками электрических разрядов высокого напряжения. <Очистка>When the PLASMA / WASH indicator is flashing, the PLASMA CUSHION / AIR CLEANING filter units must be cleaned. For cleaning instructions, see page 189.<Замена фильтров ПЛАЗМЕННОГО ОСВЕЖЕНИЯ> * See “REPLACING THE PLASMA COOLING FILTER ...” on page 189. ECONO COOL FUNCTION Use this function if you want to feel comfortable when the air conditioner is operating in COOL mode - while saving energy ... Perform the following operations while the air conditioner is operating in MANUAL COOL mode. ■ Press the ECONO COOL button WHEN YOU ARE NOT GOING TO USE THE AIR CONDITIONER FOR A LONG TIME When you are going to turn off the air conditioner for a long time: 1. When (ECONO COOL) is selected in COOL mode, the air conditioner operates in vertical swing mode with a variable cycle depending on the temperature of the air conditioner. This sets the REFERENCE TEMPERATURE 2 ° C higher than in COOL mode. To deactivate the ECONO COOL function: Press the button again. ■ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Run the air conditioner for 3 or 4 hours in FAN (fan) mode to dry internal parts of the device. To activate FAN mode, set the maximum temperature on the remote controller in MANUAL COOL mode. (see page 183.) 2 ECONO COOL VANE FAN TOO WARM TOO COOL, or and ON / OFF timer The buttons (explained below) remain active. What is “ECONO COOL” function? Swinging airflow (changing the direction of the airflow) brings a feeling of extra freshness compared to constant airflow. Thus, although the preset temperature setting is 2 ° C higher, you will feel comfortable when the appliance is in cooling mode. As a result, you can save energy. TIMER OPERATION (ON / OFF TIMER) 1 2 3 CAUTION: If you are not going to use the air conditioner for a long time, turn off the mains breaker or disconnect the power plug from the outlet. Otherwise, dirt may accumulate and this may result in a fire. 3 Remove the batteries from the remote control. Clean the air filter and install it in the indoor unit. (For instructions on how to clean the filter, see page 188.) Turn off the mains breaker and / or disconnect the power plug from the outlet. If the button is pressed while the ECONO COOL function is active, the ECONO COOL function is canceled. When you are going to turn on the air conditioner after a long break: Make sure that the air intake and exhaust openings of the indoor / outdoor unit are not blocked by foreign objects. Check for proper ground connections. CAUTION: Ground the instrument. Do not connect ground wires to gas or water pipes, lightning conductors, or telephone ground cables. Improper grounding of the appliance can result in electric shock. CAUTION: To prevent leakage of liquid from the batteries, remove them from the remote control if you are not going to use the remote control for a long time. It is more convenient to set the timer for the time when you go to bed, when you return home, get up in the morning, etc. How to set the ON timer 1 Press the button in operation. START when the air conditioner How to set the OFF timer 1 Each time you press this button, the ON timer switches between ON and OFF. 2 Set the timer time using the TIME (Forward) and (Back) buttons. ■ Press the START button. STOP 2 Before cleaning the appliance Set the timer time with the TIME (Forward) and (Back) buttons. Each time the button is pressed, the set time increases by 10 minutes, and each time it decreases by 10 minutes. pressing the button To exit the OFF timer mode: ■ Press the APPLIANCE button while the air conditioner is pressed Each time the button is pressed, the OFF timer switches between ON and OFF. Each time the button is pressed, the set time increases by 10 minutes, and each time it decreases by 10 minutes. pressing the button To exit the ON timer mode: Press the button in operation. STOP. How to program the timer ON Timer and OFF timer can be used in combination. The timer, the set time of which comes earlier, will go off first. (The “” icon indicates the order of the timer.) If the current time is not set, the timer cannot be used. NOTES: If a power outage or power failure occurs during AUTO START / STOP timer operation, the timer settings are disabled. Since these models are equipped with an automatic restart function, the air conditioner starts operating with the timer off immediately after the power is restored. ■ Turn off the mains breaker and / or disconnect the power plug from the outlet. CAUTION: Before cleaning the appliance, turn it off and disconnect the power plug or turn off the mains breaker. As the fan blades rotate at high speed, injury may result. Cleaning the indoor unit ■ The unit should be cleaned with a dry soft cloth. For stubborn dirt, wipe the device with a cloth soaked in a solution of a mild detergent diluted in lukewarm water. It is forbidden to use gasoline, ether, polishing powders and insecticides. Using them can damage the device. The front panel may come off if lifted above its normal horizontal position. When detaching the front panel, see step 3 in CLEANING THE FRONT PANEL. 187 CLEANING THE FRONT PANEL, HEAT EXCHANGE UNIT AND FAN Front panel 1 Heat exchanger Press and release the handles on both sides of the front panel and lift the panel until it clicks. (1) While holding the hinges, lift the panel up to a horizontal position and pull the hinges forward to remove the front panel. (2) ■ Heat exchanger Hinge Hole CAUTION: Do not drop the front panel or use force when detaching it. This could damage it. When removing or installing the front panel, use only stable benches. Failure to do so may result in injury, etc. Make sure not to bend the metal bar (silver colored) that is visible when the front panel is open. This may cause malfunction or abnormal sound during operation. Wipe the front panel with a soft dry (or water-dampened) cloth. When washing the panel, wipe it dry with a soft dry cloth and leave to dry out of direct sunlight. If you see dirt, wipe the front panel with a cloth soaked in a mild detergent solution diluted in warm water. Do not use benzine, thinner, scouring powder or insecticide, and do not wipe the front panel with coarse brushes or sponges. Do not soak the front panel in cold or warm water for more than two hours, and do not leave it in the sun in a warm place or near an open flame. This may deform or discolor the panel. Hold the front panel by the ends and keep it horizontal, and insert the hinges into the holes on the top of the indoor unit until you hear a click. Then, carefully close the front panel and push in the three places on the front panel indicated by the arrows. 188 1 To remove the anti-mildew air filter, lift the filter while holding the handle and then pull it down. Anti-mildew air filter 2 3 Cleaning the anti-mildew filters (once every about 2 weeks) Before cleaning the heat exchanger, remove the anti-mildew filters and the PLASMA REFRIGERATION / CLEANING filter blocks. 1 2 CLEANING THE AIR FILTER You can clean the surface of the heat exchanger by attaching the brush from the QUICK CLEAN KIT to the vacuum cleaner. For detailed cleaning instructions, see the manual for the QUICK CLEAN KIT (packed with the outdoor unit). WARNING: Do not touch the heat exchanger with your hands. You can get damaged. (It is recommended to protect your hands with gloves.) CAUTION: When cleaning, do not stand on an unstable stand. You may fall and be injured. Use only the brush from the QUICK CLEANING KIT. Do not use other tools. Otherwise, you may damage the heat exchanger or indoor unit. NOTE: Attachments from the QUICK CLEAN KIT can be fitted to a vacuum cleaner with a hose / pipe diameter (ID) of 32 to 39 mm. See the instructions for the QUICK CLEANING KIT supplied with the outdoor unit. Fan For fan cleaning, see page 190. Remove. 3 After rinsing the filter with water / warm water, dry the filter out of direct sunlight. When drying, do not expose the anti-mold filter to direct sunlight or heat from an open flame. Open the front panel and remove / replace the filter. CAUTION: When removing the anti-mold filter, do not touch the metal parts of the indoor unit. This can cause damage. 2 Remove dirt from the anti-mildew air filter with a vacuum cleaner or by rinsing the filter with water. Do not use a hard brush or hard sponge. This can deform the filter. For stubborn dirt, wash the filter in a solution of a mild detergent diluted with lukewarm water. Using hot water (over 50 ° C) may deform the filter. 4 Install the anti-mold air filter. (Carefully install the tabs.) Replace. CLEANING THE PLASMA COOLING / AIR CLEANING FILTER UNITS When the PLASMA / WASH indicator is blinking, clean the filters as soon as possible. The indicator starts blinking after exceeding the total operating time - 330 hours. 1 Install the PLASMA COOLING / AIR CLEANING filter units following the removal instructions in reverse order. 1 BEFORE CLEANING Turn off the indoor unit with the remote controller and disconnect the power plug from the wall outlet and / or turn off the breaker. Failure to do so may result in damage as the PLASMA REFRIGERATION / AIR CLEANING filter units carry high voltages. REFITTING 2 Remove the anti-mold air filters. 2 3 4 3 Hold the handles on both sides of the front panel and lift the panel to a horizontal position. Remove the PLASMA REFRIGERATION / AIR CLEANING filter unit. 5 6 7 CLEANING 1 Clean the filter surfaces with a vacuum cleaner or rinse with water. After cleaning, leave the filters in warm water at a temperature of 30 to 40 ° C for 10-15 minutes. (To remove stubborn stains, clean the filters in a mild aqueous solution of alkaline detergent.) The ceramic refreshing filter inside the PLASMA COOLING filter unit is fragile, so handle it with care. Clean the filter without removing it from the filter unit. (A detailed description of the Ceramic Refreshing Filter is shown on the right.) 2 After soaking the filter units, shake them horizontally and vertically and rinse under running water. Shake off excess water. To remove stubborn stains such as oil and nicotine stains, repeat these procedures two to three times. 3 Dry the blocks by hanging them in a shaded, well-ventilated place. If you cannot hang the filter units, arrange them as shown in the following figure. NOTE: If the PLASMA DEODORIZATION / AIR CLEANING filter units are submerged in water for cleaning, the filter casing may turn white, but this does not affect performance or quality in any way. Keep using these filter boxes. Do not use detergents containing bleach. Do not disassemble the PLASMA COOLING / AIR CLEANING filter units. Do not dry the PLASMA REFRIGERATION / AIR CLEANING units with hot air from a hair dryer or other devices. (Hot air may deform the filter unit.) PLASMA REFRIGERATION / AIR CLEANING filter units may only be installed completely dry. If the filter unit is wet, the PLASMA / WASH indicator will flash and the PLASMA function will turn off. 1 Install the PLASMA REFRIGERATION / AIR CLEANING filter units into the hole in the plasma element holder. The PLASMA REFRIGERATION / AIR CLEANING filter units must be pushed in until they click. The front panel will not close if the PLASMA COOLING / AIR CLEANING filter units are incorrectly installed. Plasma element holder 5 Installing the anti-mold filter. E.O. SW Plug in the power cord and / or turn on the breaker. Press the reset WASH switch. A short beep will sound and the PLASMA / WASH indicator will stop flashing. When you turn on the air conditioner again, make sure the PLASMA / WASH indicator is not blinking. 7 WASH reset Holding onto both ends of the front panel, close the panel. Press in the three arrow locations on the front panel. REPLACING THE PLASMA REFRIGERATION FILTER (CERAMIC REFRESHING FILTER) Replacing the ceramic refreshing filter (once every 6 years) The ceramic refreshing filter is installed in the PLASMA REFRESHING filter unit. The filter is made of fragile material. Handle it with care. 4 1 CAUTION: If the ceramic refreshing filter is not installed, the PLASMA REFRESHING filter unit may not function properly. Make sure the ceramic refreshing filter is installed. Dispose of the Ceramic Refreshing Filter in accordance with the local disposal regulations. (Main material: ceramic.) 2 Open the two handles to open the filter unit. To remove, pull the handles outward and then forward as shown in the following illustration. 1 2 3 Pull out the ceramic refreshing filter from the side of the filter unit. Installation of the ceramic refreshing filter is carried out in the reverse order of its removal. Optional Items Part Name Ceramic Refreshing Filter Part Number MAC-305FT-E 189 CLEANING THE INDOOR UNIT AIR OUTLET AND FAN 5 Before cleaning Unplug the indoor unit using the remote control and unplug the power cord from the outlet or turn off the power switch. Otherwise, personal injury may result because the fan of the indoor unit rotates at a high speed during operation. Be careful not to injure your hands. If the air inlet or fan is covered with dirt, mildew or dust, clean it with a damp or dry soft cloth or a brush from the QUICK CLEAN KIT installed on the vacuum cleaner. If dirt accumulates near the air inlet, clean it with a cloth dampened in a mild detergent diluted in warm water. For detailed instructions on cleaning operations using the brush from the QUICK CLEAN KIT, refer to the manual for the QUICK CLEAN KIT (packed with the outdoor unit). Do not use gasoline, petrol, or grinding powder. Do not apply excessive force to the fan. Otherwise, it could be damaged. Cleaning 1 2 Hold the handles on both sides of the front panel and lift the panel to a horizontal position. While holding both ends of the horizontal vane, pull it out by hand and check that the fan stops. Clean the air outlet and fan of the indoor unit. (Make sure the fan stops.) 6 Reinstall the vertical vanes one at a time. 2 To install the vertical vane 1 Holding the strips of each vertical vane, slide the vanes into their slots. push it in until it clicks. Down. 3 Remove the horizontal vane. Hold the horizontal vane while unlocking the latches. Notch When installing the vertical vanes, hold on to the strips, otherwise the vanes may be damaged. Do not apply excessive force to the fan grill during this operation. The fan grill can be deformed and the louvers will not work properly. Set the vertical vanes to their original positions. Otherwise, condensation may drip from the indoor unit or the horizontal vane may not work properly. Follow steps 1 and 2 to remove the horizontal vane. Right Unlocking. Blocking. 2 1 Stopper 7 Install the horizontal guides. (Reverse the removal procedures.) 1 Unlock. 2 Limiter Left Locking. Insert this end first. 4 Rotate the vertical guides outward one by one. 1 Hold the appliance with one hand and grasp it 2 Hold the bar of each vertical vane with the other on the bar of each vertical vane and, pulling it down, rotate. flaps, move them in the directions shown by the arrows. The shutters cannot be removed. Pull towards you. In procedures 2, lock the stoppers until they click. 8 9 Holding onto both ends of the front panel, close the panel. Press in the three arrow locations on the front panel. (see page 189.) After cleaning Cannot be removed. Insert Turn left. Turn right. Fan guard When turning the vertical blades, hold on to the bar, otherwise the blades may be damaged. Do not apply excessive force to the fan guard during this procedure. The fan guard may be deformed and the rails may not work properly. 190 Plug in the power cord and / or turn on the switch. Make sure the LEDs are not blinking. If the indicators are flashing, the horizontal vane was not installed correctly. In this case, unplug the power cord and / or turn off the breaker and set the horizontal vane following the instructions for step 7. When turning on the air conditioner after cleaning the air outlet and fan, do not go close to the air outlet as remaining dust may be blown out. CHECK THE FOLLOWING BEFORE CALLING SERVICE QUESTION Check items or remedy The air conditioner does not work. Is the mains circuit breaker turned off? Is a fuse blown? Is the ON timer programmed? (Page 187) All LED indicators on the indoor unit flash. Is the horizontal rail connected to the indoor unit correctly? (Page 190) The horizontal guide does not move. Are the horizontal and vertical rails connected to the indoor unit correctly? (Page 190) Is the fan guard deformed? Insufficient cooling or heating of the room. Is the temperature set incorrectly? (Page 183) Is the filter clogged? (Page 188) Is the fan of the indoor unit clean? (Page 188) Is the air intake or air outlet of the indoor or outdoor unit blocked? Is there a window or door open? The air discharged from the indoor unit has a peculiar smell. Is the filter clogged? (Page 188) Is the fan of the indoor unit clean? (Page 188) Remote control display Are the batteries empty? (Page 181) remote Is the polarity (+, -) reversed Is there no control when installing the batteries? (Page 181) Display or display Some buttons may have been pressed and dimmed. Internal remote control of other appliance does not respond to electrical appliances? signals from the remote control. If a power failure occurs. Has the air conditioner resumed operation? If the air conditioner was running before the power outage, it will start again, as these models are equipped with an auto-start function. (See the description of the autostart function on page 182.) If the air conditioner does not resume normal operation after performing the above checks, stop using it and contact your dealer. In the cases described below, stop the operation of the air conditioner and contact your dealer. If water drips off the indoor unit. If the POWER indicator is flashing. If the mains circuit breaker is frequently triggered. The signal from the remote control may not be received in a room where fluorescent lamps are installed ON / OFF by an electronic device (inverter type fluorescent lamps, etc.). In areas with weak electrical waves, the air conditioner may interfere with radio or TV reception. An amplifier may be required for normal radio or TV reception. During a thunderstorm, stop the air conditioner and disconnect the power plug from the wall outlet or turn off the power breaker. Failure to do so may result in damage to electrical components. IF YOU THINK THAT THE APPLIANCE IS DEFECTIVE Question Answer (this is not a malfunction) When restarting, the device does not respond to control commands for about 3 minutes. This is a microprocessor-activated protective function of the air conditioner. Please wait. A crackling sound is heard. The crackling noise is caused by the expansion / contraction of the front panel and other parts of the appliance due to temperature changes. The air discharged from the air conditioner sucks in odors from walls, carpet, indoor appliance, furniture, fabrics and blows them out along with the air. specific smell. Is the PLASMA CUTTING filter unit cleaned? If the appliance gets dirty, clean it, and if the ceramic refreshing filter is noticeable, replace the filter with a new one. When the air conditioner is operating in PLASMA mode, you may smell ozone generated in small quantities by the PLASMA REFRIGERATION / AIR CLEANING filter units. This is not a malfunction. The outdoor fan does not rotate even when the compressor is running. Even if the fan starts spinning, it stops quickly. In low outdoor temperatures, the fan may not work to maintain sufficient cooling capacity. The sound of flowing water is heard. This is the sound of refrigerant flowing in the pipes of the air conditioner. This is the sound of condensed moisture flowing in the heat exchanger tubes. This is the sound of the heat exchanger when defrosting. A gurgling sound is heard. This sound is heard when outside air is sucked in from the drain hose when the hood or fan is turned on, which causes a jet of water to flow out of the drain hose. This sound is also heard in strong winds when outside air is forced into the drain hose. The room is not cooled sufficiently. When a fan or gas stove is used in the room, the load on the air conditioner in cooling mode increases, resulting in reduced cooling efficiency. Cooling performance may decrease at high outdoor temperatures. Light mist comes out from the air outlet of the indoor unit. The cool air from the air conditioner quickly cools the moisture in the indoor air and creates a haze. Mechanical sound is heard from the indoor unit. This sound appears when the fan or compressor is turned on / off. Question Answer (this is not a malfunction) When the air conditioner is operating in COOL mode During operation or DRY, when the air flow direction is changed, the air flow direction changes downward for 1 hour to prevent the air from dripping. The direction of flow is automatically horizontal to position (1). the flap cannot be used In heating operation, if the air flow temperature is adjusted too low with the remote control, or during defrosting, the position of the remote horizontal vane is automatically controlled. set to “horizontal”. Water flows out of the outdoor unit. When operating in COOL and DRY modes, pipes and pipe connections are cooled down causing moisture condensation. In heating operation during defrosting operation, the frozen water on the outdoor unit melts and flows down. When operating in heating mode, moisture condensed in the heat exchanger flows down. White smoke comes out of the outdoor unit. In heating mode, steam generated by defrosting will appear as white smoke. Air is not immediately blown out during heating operation. Please wait while the air conditioner is preparing to blow out warm air. During heating operation, the appliance stops for about 10 minutes. Defrosting of the outdoor unit is in progress (Defrosting operation). This operation takes 10 minutes, please wait. (Frost will form in low outdoor temperatures and high humidity.) A hissing sound is sometimes heard. This sound is heard when the refrigerant flow inside the air conditioner changes. The room is insufficient When the outdoor temperature is low, the heating efficiency may be reduced. heated. If one of the indoor units is not used in a multi-unit system, it heats up and a noise similar to the sound of running water may be heard. A small amount of refrigerant continues to flow into the indoor unit even if the unit is not being used at this time. The air conditioner will only start when the power is on, even if you do not operate the unit with the remote controller. These models are equipped with an auto-start function. When you turn off the power without stopping the operation of the air conditioner using the remote control and then turn on the power, the air conditioner will automatically start operating in the mode that was set with the remote control before the power was turned off. 191 IF YOU THINK THIS APPLIANCE IS DEFECTIVE Question Answer (not a malfunction) The PLASMA / WASH indicator blinks after cleaning. Press the reset WASH switch inside the front panel. The indoor unit emits a faint hiss. This is a plasma sound, not a malfunction. The PLASMA REFRIGERATION / AIR CLEANING filter units make clicking sounds. Are the PLASMA DEODORIZATION / AIR CLEANING filter units clogged with dust? Clean the PLASMA DEODORIZATION / AIR CLEANING filter units. Are the PLASMA DEODORIZATION / AIR CLEANING filter units damp? Dry the PLASMA DEODORIZATION / AIR CLEANING filter units completely. Question Answer (this is not a malfunction) This is necessary for normal Swivel operation to perform the VERTICAL & VERTICAL & HORIZONTAL HORIZONTAL FLAP swivel operation. pauses briefly and then restarts. The automatic front panel does not close after opening it when the air conditioner is off. If you open the automatic front panel when the air conditioner is off, it will remain open. Disconnect the power plug from the wall outlet and / or turn off the switch and then turn the plug and / or switch back on. The automatic front panel does not close. Are the PLASMA DEODORIZATION / AIR CLEANING filter units installed correctly? Are the anti-mold filters installed correctly? Install them securely. Question Answer (this is not a malfunction) If the front panel was opened by automatic manual while the air conditioner was turned off, the front panel will remain open; it will not be closed manually. condition. Unplug the power cord and / or turn off the switch, and then reconnect the plug and / or turn on the switch. The automatic front panel will open all the way once and then close. From the indoor unit If the automatic front panel is not fully open, water drips during operation. condensation may form on the air conditioner and drip down. In this case, use the remote control to turn off and on the air conditioner. The automatic front panel should close and then open completely. After If the automatic front panel is automatic front open at the moment when the indoor unit is completely shut down for maintenance opening, silent maintenance, etc. will sound, the sound will sound when a click is made. (For about 13 seconds, the indoor unit will resume operation and maximum) detect the position of the automatic front panel. This is not a malfunction. If the indoor unit is turned off due to a power failure, etc., and the automatic front panel is open, a sound will sound when the indoor unit resumes operation and detects the position of the automatic front panel. This is not a malfunction. 192 INSTALLATION, HANDLING AND INSPECTION OF THE APPLIANCE Place of installation Avoid installing the air conditioner in the following places. Locations where flammable gas may leak. CAUTION: Do not install the appliance in an area where flammable gas may leak. An explosion may result if flammable gas leaks and accumulates near the appliance. In places where there is a lot of machine oil. In places where there is a lot of salt, such as the seaside. Locations where hydrogen sulphide gas is generated, such as near a natural hot spring. In places where oil products are discharged or in places with abundant oil fumes. If you have high-frequency or radio-receiving equipment. The outdoor unit should be installed at least 3 m away from TV, radio, etc. antennas. In areas with weak electrical waves, a greater distance is required between the outdoor unit and the antenna if the air conditioner interferes with radio or TV reception. ... Install as far away as possible to protect against exposure to fluorescent lamps. Inverter type fluorescent lamps, wall, etc. Provide sufficient distance to avoid picture and sound distortion. At least 1 m Well-ventilated dry place At least 100 mm At least 200 mm TV At least 1 m Cordless telephone or Portable telephone Radio receiver At least 3 m CAUTION: Ground the unit. Do not connect ground wires to gas or water pipes, lightning conductors, or telephone ground cables. Improper grounding of the appliance can result in electric shock. Install an earth leakage breaker in the place where the air conditioner is installed (places with high humidity, etc.) depending on the specific conditions. If an earth leakage breaker is not installed, an electric shock may result. Inspection and maintenance of the appliance After using the air conditioner for several seasons, its performance may decrease due to the accumulation of dirt on the internal parts of the appliance. Depending on the specific operating conditions, the formation of unpleasant odors or incomplete drainage of moisture due to the accumulation of dirt, dust, etc. In addition to routine maintenance operations, it is recommended that the air conditioner be regularly inspected and serviced by a specialist. Please contact your dealer. Pay attention to the noise generated by the unit WARNING: If the air conditioner is operating but does not cool or heat (depending on the model) the room, contact your dealer as this may indicate a refrigerant leak. After carrying out repairs, be sure to ask your service representative about the presence or absence of refrigerant leaks. The refrigerant charged into the air conditioner system does not pose a health hazard. Usually, there is no refrigerant leakage, however, if refrigerant gas leaks indoors and then comes into contact with the fire of a fan heater, space heater, stove, etc., substances harmful to health are formed. Electrical Work Provide a separate circuit for the power supply of the air conditioner. Be sure to observe the power rating of the circuit breaker. WARNING: Do not self-install the air conditioner by the user. Improper installation may result in fire, electric shock, injury from falling product, fluid leakage, etc. Do not use an intermediate connection in the power cord or use an extension cord. Do not connect multiple electrical appliances to the same AC power source. Loose connections, insufficient insulation, higher voltage connections, etc. may result in fire or electric shock. Please contact your dealer. Do not place foreign objects near the air outlet of the outdoor unit. This can reduce the efficiency of its operation, as well as increase the noise level during the operation of the device. If unusual noise is heard during operation, consult your dealer. Moving the device to another location Moving the device or installing it in a new location due to repairs, moving, etc. requires special knowledge and special operations. WARNING: Do not repair or move the air conditioner by the user. Improper repair and handling may result in fire, electric shock, injury from falling, fluid leakage, etc. Please contact your dealer. Disposal For disposal of this product, consult your dealer. If you have any questions, please contact your dealer. SPECIFICATIONS Model Kit Indoor Outdoor Mode Power Requirements Power kW Input Power kW Indoor kg Weight Outdoor kg Refrigerant Volume kg (R410A) Indoor IP Code Outdoor Allowable Low MPa pressure (ps) excess operating High. MPa pressure pressure (ps) Indoor (Very High / Level dB (A) High / Medium / Low) Noise Outdoor dB (A) MSZ-FA25VA (H) MSZ-FA35VA (H) MSZ-FA25VA MSZ-FA35VA MUZ-FA25VA (H) MUZ -FA35VA (H) Cooling Heating Cooling Heating ~ / N, 230V, 50Hz 2.5 3.2 3.5 4.0 0.595 0.735 0.935 0.995 10 33 37 0.90 NOTES: 1. Estimated operating conditions Cooling - Room temperature : Outdoor temperature: Heating Indoor temperature: Outdoor temperature: * DB Dry bulb ** WB - Wet bulb 2. Guaranteed operating temperature range 1.05 Internal IP 20 IP 24 Upper limit Cooling 1.64 Lower limit 4, 15 Upper limit 42/36/29/21 46 42/36/29/22 47 48 27 ° C DB *, 19 ° C WB ** 35 ° C DB 20 ° C DB 7 ° C DB, 6 ° C WB Heating Lower limit 32 ° C DB 23 ° C WB 21 ° C DB 15 ° C WB 27 ° C DB - 20 ° C DB - Outdoor MUZ-FA25 / 35VA MUZ-FA25 / 35VAH 46 ° C DB 46 ° C DB - - - 10 ° C DB -10 ° C DB - - 24 ° C DB 24 ° C DB 18 ° C WB 18 ° C WB -10 ° C DB -20 ° C DB -11 ° C WB -21 ° C WB 193 This product is designed and intended for use in the residential, commercial and light-industrial environment. The product at hand is based on the following EU regulations: Low Voltage Directive 73/23 / EEC Electromagnetic Compatibility Directive 89/336 / EEC HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100 -8310, JAPAN SG79Y401H03

Instructions on the following model:

DXK09Z3-S

Mitsubishi Heavy air conditioner DXK09Z3-S

Description of each part
Selection of operating modes
Additional settings for work
Cleaning your air conditioner
At the end of the season
Selecting an installation site and carrying out electrical work

Precautionary measures

Please read this manual before use. After reading, keep it in an accessible place so that you can read it again if necessary.

Description of each part
Indoor unit.

1 - Front panel.
2 - Air filter.
3 - Thermal sensor.
4 - Heat exchanger.
5 - Fan of the indoor unit.
6 - Left-right direction switch.
7 - Vertical direction switch.
8 - Water drainage hose.
9 - Tubes for refrigerant supply.

The indoor unit has indicator lamps that light up in certain modes.
RUN - green color means the air conditioner is running. Flashes when the specified temperature has been reached and the unit has entered standby mode.
TIMER - lights up during the execution of actions with the timer.
HI POWER - lights up when operating in maximum power mode.
ECONO - informs that the energy saving mode is on.
Next to them there is an emergency on / off button and a sensor for receiving commands from the remote control.

Outdoor unit

1 - Air intake.
2 - Air outlet.
3 - Fan of the outdoor unit.
4 - Heat exchanger.

Remote control

Preparation before starting work
Install identical new batteries in the remote control, do not use rechargeable batteries. Then press the ACL button with a thin object.
Then you can set the time and date.
Do not place the remote control near heat sources, in direct sunlight, do not drop the remote control, do not place heavy objects on it, avoid contact with water.
If the remote control stops working, check if there are batteries, if they are inserted correctly, if they are of the same type. In the event of a remote control malfunction, you can operate the air conditioner using the emergency start button on the indoor unit. Consecutive pressing on it includes the following modes Cold-Off. Do not hold the button pressed for more than 5 seconds, otherwise a special mode used by the service department will be activated.

Selection of operating modes
Auto selection mode "AUTO". In this mode, the device independently chooses what to choose (heating or cooling) in order to maintain the temperature at a given level. The temperature level is set by buttons 3 on the remote control. Each press changes the digit by one.
If you want, you can turn off the auto selection mode.
COOL, HEAT, DRY, FAN modes.

When cooling air in a room, it is recommended to adhere to the following scheme: external temperature 21-46 ° C, internal temperature 18-32 ° C. When heated, -15-21 ° C external means a possible internal 15-30 ° C.
It should be remembered that when operating in heating mode, the start of operation of the indoor unit is delayed in time. This is necessary to start the system correctly. It is also important to remember that in order to defrost the outdoor unit, the device will periodically stop working.

Additional settings for work
The direction of air discharge is selected by pressing the AIRFLOW button. You can select the automatic position selection mode, five fixed and the flap swing mode.
Attention! It is recommended to choose a direction close to horizontal for cooling, and close to vertical for heating.

Sleeping mode ... By pressing the button number 5 you can program the shutdown of the air conditioner at the time you need. Attention! Sleep mode allows you to specify AFTER what time the air conditioner should turn off. When you turn on the TIMER, you specify the exact time when the device is turned off.
The on timer allows you to set the on time, at the same time, the off timer allows you to turn off the device at the right time.
Thus, you can use the on timer to turn on the job at the desired time and then either turn it off AFTER the desired time (sleep timer) or At the specified time (off timer).
During operation, you can adjust the fan power by pressing the HI POWER-ECONO button. Accordingly, HI POWER is the maximum power, and ECONO is the energy saving mode. TIP: Regularly check the condition of the air filter on the indoor unit to save energy.

Cleaning function starts working after pressing the CLEAN button. The duration of the operation is 2 hours. After completing it, the air conditioner turns off. You can manually stop its execution by pressing the ON / OFF or SLEEP buttons. During this procedure, the light blinks in the mode of 3 seconds of light - one is off. This mode of operation is not intended to remove existing fungi and mold.

Self-start function means that your air conditioner will turn on by itself after an emergency power outage and will work in the same mode in which it was running before it was turned off.

Cleaning your air conditioner
To first unplug it and then unplug it from the outlet. Stand on a secure footing so you don't fall. Do not use gasoline, water hotter than 40 grams Celsius, abrasive detergents.
Replace air filters promptly. For more complex work, call specialists.

At the end of the season
Turn on the heating mode for 3-4 hours to dry the indoor unit and prevent mold growth. Then turn off the air conditioner and unplug the power plug. Clean the outdoor and indoor units and remove the batteries from the remote control.
At the beginning of the season.
Make sure there are no mechanical obstacles to air movement near the indoor and outdoor units. Make sure there is no corrosion on the outdoor unit. Insert the batteries into the remote control. Connect the plug to the power supply.

Selecting an installation site and carrying out electrical work
There must be a good location in terms of air outflow from both A / C units.
Should not be installed in the following locations:
Where there is a risk of oil splashing.
In places with salty and humid climates.
Where flammable gases may leak.
Where there are impurities of sulphide gases.
Closer than 1 m from radio and TV.
Where safe drainage of condensate from the outdoor unit is not possible.

Does the air conditioner not work? Make sure that it is connected to the mains, that there are batteries in the remote control, that they are installed correctly.
Is your device not working as efficiently as it used to? Is the desired temperature correct? Are the air filters clean, and are the windows and doors in the room closed? The air conditioner works worse if there are many people in the room at the same time. Are there any heating devices in the refrigerated room?
The device does not turn on immediately after turning off - this is the norm, it should do so, waiting for 3 minutes. When the heating mode is turned on, the device comes into operation for several minutes and periodically stops for 10 minutes to defrost the outdoor unit.
When you select the dry mode, the device does not work all the time - this is the norm, since its task is to dry, not cool the air.
An odor is heard from the air conditioner. First of all, you need to check if it belongs to a damp wall or carpet, after which you should check if there is any mold in the device.
Clicks and similar sounds can accompany the process of changing the temperature of the indoor unit. Bubbling sounds are possible due to the movement of refrigerant, condensate or air being sucked into the room through the drain hose.

Precautionary measures
This product is intended for use in the home; malfunction may occur elsewhere.
It must be installed and connected by trained professionals. Do not install the device where flammable substances may appear in the air. Do not spray insecticides or other flammable substances on the indoor and outdoor units. It is imperative to use grounding when connecting to the mains. Be sure to check that the condensate drain is correct so that it does not damage your furniture or structure.
Do not stay in the path of cold air coming out of the indoor unit for a long time. Do not insert fingers or foreign objects into the openings, as this may result in injury.
Make sure that the air conditioner is operated by persons who have read these instructions. Do not leave the remote control in the reach of children - they may swallow the batteries. Use identical batteries for the remote control and change them in time.
Connect the plug only to the socket provided for the air conditioner, do not use extension cords, all work with the plug should be carried out with dry and clean hands. Keep the plug and wires clean. Do not stand on the wire or place objects on top of it. Do not disconnect the plug from the outlet during operation; for this, you must first turn off the air conditioner using the remote control. It is necessary to wait 5 minutes, after disconnecting with the remote control, and only then you can remove the plug from the socket.
Do not place foreign objects on the indoor / outdoor unit, especially with water. Do not touch the aluminum parts on the air conditioner, it may cause injury.
If appliances with open flames are used in the room, be sure to ventilate the room from time to time.
Do not run the air conditioner without an air filter. For the repair and maintenance of the air conditioner, be sure to invite trained specialists. Inform the installer if the appliance starts to make strange noises and stops heating / cooling - this can happen if refrigerant leaks, which should only be corrected by specialists.
Unplug the air conditioner during lightning storms.

Mitsubishi Heavy air conditioner SRK20HG-S

Table of contents
Disposal
Name of each part

Selection of operating modes
Additional modes and settings
Useful Tips
Cleaning your air conditioner
If you think there is a problem
When the air conditioner will not be used for a long time (At the end of the season of use)
Installation site and electrical work
Precautionary measures

Name of each part
Outdoor unit

1 - Air intake is carried out here - on the rear-side surfaces.
2 - After contact with the heat exchanger, the air is vented to the outside on the front surface.

Indoor unit

1 - Remember that air is drawn in at the top side.
2 - The sensor for receiving commands is located on the front panel of the indoor unit.
3 - During operation, the specified panel opens to expel air.

Remote control

1 - Button for turning the device on and off.
2 - Fan power control.
3 - Control of the direction of the outgoing air.
4 - Add-decrease temperature.
5 - Selecting the operating mode.
6 - Start ionization.
7 - Timer control (turn on, reset, time control).

Preparation before starting work
Before using this appliance, make sure you have a dedicated outlet of the correct wattage. Do not use a carrier or extension cord for connection. Be sure to ground the appliance.
Install batteries of the same state of charge. Do not use different types of batteries or rechargeable batteries.

Selection of operating modes
Turning on the device by pressing the button on the remote control, then pressing the MODE button select the mode that you need now.
Automatic mode - the device itself chooses to heat or cool the room, depending on whether it has become colder than you specified or warmer.
In cool weather, heating mode is sufficient. Please note that to protect you from uncomfortable cold air, the appliance only turns on the fan when it is warmed up. In this mode, ice may appear on the outdoor unit, removing which, the device will periodically stop.
Cooling - the device will cool the air.
Dehumidification - slightly cooling the air conditioner will remove water from the air.
Ventilation - maintaining the movement of air in a room.

Additional modes and settings
The following additional modes are available for this model.
Air ionization connection. This reduces contamination by bacteria, viruses.
Timer - thanks to this function, you can specify in advance at what time the air conditioner should turn on, and at what time it should turn off without your participation.
There is a manual switch on the indoor unit, which can be used if the remote control does not work.
Turbo mode - in the first 15 minutes of operation, the air conditioner operates at maximum power.
The remote control buttons glow in the dark, which allows you to find it when the lights are off.

Useful Tips
It is not recommended to cool the room too much. This can waste energy and lead to illness.
Make sure that cold air does not leave the room - close windows and doors.
Direct rays of the sun, heating devices turned on, and a large number of people in the room can slow down the cooling of the room.
It is also important to keep an eye on the direction of air discharge - a horizontal baffle should direct the air downward during heating and forward during cooling.
Note that a clogged air filter will impair the operation of the air conditioner.
Since the air conditioner does not renew, but only cools the air, it is important to ventilate the room on time.

Cleaning your air conditioner
Please be careful not to use gasoline, too hot water and abrasives that could damage the appearance of the plastic parts.
Be sure to disconnect the device from the mains before using.
Use a secure footing for these activities.
Dry all parts of the air conditioner in the shade.

If you think there is a problem
If the air conditioner does not turn on, is it plugged in, is there power in the network. Perhaps the problem is that the timer has turned off the work.
If you cannot turn on the device for 3 minutes after turning it off, then this is the work of protection against quick restarts. Wait for the allotted 3 minutes.
In the dehumidification mode, the device will not work continuously - in order to dehumidify without cooling, it is necessary to periodically stop its operation.
When the room is heated, the outdoor unit will conduct the cold outside, so a fog similar to white smoke will appear around the air coming out of it.
During heating, there will be stops required to defrost the outdoor unit.
When cooling a room where there is a lot of moisture, a situation is possible when fog will appear around the cold stream.
The operation of the air conditioner will automatically continue in the same mode in which it was before the power was turned off.
During the operation of the air conditioner, water - condensation may flow from both units. Therefore, furniture and electrical appliances should not be placed under the air conditioner.
If the remote control does not work, check that the batteries are working and that they are present.
If the air conditioner does not cool well, then you should check whether the windows and doors are closed, whether the operating mode is correctly set, the condition of the filters and whether air is escaping through the open windows and doors.
If the air coming out of the air conditioner smells unpleasant, check if there is any dirt on the indoor unit, filters, or on the wall near the air conditioner.
When heated, the plastic expands, which can cause a crackling sound.
When refrigerant and condensate flow, the sound of water flow may be generated.

When the air conditioner will not be used for a long time
Before this period, you need to dry it in heating mode, disconnect it from the mains and remove the batteries from the remote control.
Before connecting, check that the grounding is working, nothing obstructs the air movement.

Installation site and electrical work
It is not allowed to install the air conditioner in places where there is a lot of engine oil, there are flammable substances in the air, salty moisture.
Experienced specialists should connect to a grounded network.

Precautionary measures
Make sure that the device is connected directly to the outlet, without adapters, and is grounded.
You cannot repair, change and perform such work yourself, either with the power cable or with the device itself.
Any handling of the air conditioner should be done with dry hands.
Do not put anything on both blocks and wire.
Do not unplug from the mains - first unplug from the remote control.
The air conditioner has a high-speed fan - do not stick pencils and fingers inside.
If there is a burning smell, strange sounds - disconnect the device from the mains and call the repairmen.
Avoid prolonged exposure to cold air.
If the device does not heat or cool, check for refrigerant leaks.