Phone stands: the best ideas. Do-it-yourself stand - how original home-made stands and stops are made (90 photos) Cardboard phone stand

Almost any thing can serve as a coaster, and its uses can be countless. We provide you with original options on how to make a stand from any available materials that you can only have at home.

For example, in everyday life you often need a stand for a tablet or smartphone, watching a movie, reading an article or rewriting something without a stand for electronic gadgets is inconvenient.

It would seem that it is better to buy a specialized case that will perform such a function, but sometimes it is required here and now, or you just don’t want to spend money. So you need to turn on your ingenuity and make such an invention with your own hands.

Stand materials

What materials can the stand be made from?

Cardboard
Wire
Fabric or foam
bottles
Wooden crafts
paper sheets
Constructor elements
Plastic cards

Do not limit yourself to this list, turn on the fantasy in your head and give any object such a function. The advantages of a stand that you can make with your own hands are manufacturing speed, low cost, and uniqueness.

Pencils

Take 4 rubber bands for money and 6 ordinary pencils. Connect them together in such a way that you get a three-dimensional triangle or pyramid.

Draw your attention to: inexpensive air conditioners with a guarantee in Sevastopol is always available in the Klondike online store!

paperclips

Using just one paperclip and half a minute of your time will allow you to no longer hold your phone in your hands during another activity. You just need to unbend the paperclip so that it securely holds the phone when you place it on the resulting structure.

A plastic card

We make a stand with our own hands at home from an unnecessary plastic card. You just need to bend the card across in two places so that you get the letter "S". To do this, make a bend 1 cm from the edge, and the second - in the middle of the remaining plane. This stand will hold your phone firmly.

Cardboard tablet stand

Cardboard has more uses than you can imagine. Surely you have an unnecessary piece of cardboard lying around somewhere in your house. Fold the cardboard strip in half and draw on it some figure that you think will hold the phone if you unfold the cardboard and put your phone on it.

Experiment with the shape and you will understand that any shape will hold the phone securely. Such a stand is suitable not only for a phone, if you use a larger cardboard sheet, then a book or a tablet can easily fit on such a stand.

Origami

There are many schemes on the Internet by which you can fold a stand out of plain thick paper. A few movements with scissors and the stand will be ready. It can be folded to a small size and carried with you, and when you need it, then a couple of seconds and now - your phone is no longer in your hands.

Wire

Just like with a paperclip, you can do with a wire. You will get a great stand, only now it can even support a tablet.

For a more stable design, you can resort to the help of stationery rubber bands, which will create elasticity and the stand will be more reliable.

Lego parts

You have a child? Does he have LEGO toys? Take a few cubes and make yourself a stand. Thus, you can create coasters for the whole family and for any gadget, you just have to show your imagination.

Think of an idea for what else you can make a stand with your own hands. And another option for a holder for your phone can be an old cassette holder. It's like a box, remember? It used to hold cassettes. Just turn the lid upside down and insert your phone into the cassette holder. Very convenient and compact.

Plastic bottle

It often happens that the socket is high enough from the floor, and there are no cabinets and other furniture interiors nearby where you could put your phone while it is charging. Should he not hang on a wire, dangling from side to side?

You can take an unnecessary plastic bottle, empty of course, and cut out a pocket with a hook from it, for which you can hang the bottle on the plug of your charger. No more holding your phone when it's charging.

Look at the photos of possible DIY coasters and you will understand that there can be a thousand solutions.

The stand can be made from a block of wood, and give it the shape that you like best. You can even come up with a docking station, when connected to which, your phone will charge. You just need to make a hole for the charger and put the cable with the contact in there.

Learn step by step instructions on how to make your own stand in the form of a case. Thus, you will kill two birds with one stone - both the cover and the stand.

If you are a creative person, then you will find the makings of a phone stand in any item. The main thing is the strength of the structure, because it will be very disappointing if your phone falls or breaks from the experimental stand. We hope that such a fate will not befall you.

DIY photo coasters

A mobile phone is a thing that should always be at hand. In the age of information technology, this is hard to argue with. Sitting behind the wheel, cooking in the kitchen, doing needlework or doing other things when your hands are not free, a homemade and original phone stand will become a necessary accessory.

It is simply impossible to imagine a modern person without a smartphone or telephone.

By material

In order to know how to make a comfortable phone stand, let's find out what material is used to make it.

Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way.

Metal. The metal accessory will be durable and will last a long time. The cost of such a thing will be higher in comparison with the rest, made from more budgetary material.
Tree. Popular and affordable material. Bamboo, ash is a common type of wood that is used to make holders.
Ceramics. These holders look elegant, but, unfortunately, are very fragile. Masters working with this material make coasters in the form of animals, shoes, hearts, geometric shapes.
Textile. A more childish option, when the phone is located on a small, specially sewn pillow or soft toy. This type of phone stand can be made by hand.
Plastic. A versatile material that allows you to choose the color and shape.
Paper. With your own hands from paper, you can very simply build a stand for the phone. This is a practical, lightweight option when no other alternative is available.

Modern smartphones have learned to do many different things, successfully replacing our clock, voice recorder, navigator, player and even a mobile cinema.

By style

Note! When choosing a stand style, take into account not only your individual preferences, but also the design features of the room in which it will stand.

Before ordering or creating a DIY phone stand, decide on a style.

Vintage. A variant made in the form of an old thing made of wood, metal, leather or ceramics, with a design for fixing the gadget.
Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in extra details.
Classic. Option for conservatives. Mostly the manufacture of holders in this style of wood, metal.
High tech. Modern style, without additional decorative elements. The material used is plastic.

A stand is a useful and convenient thing in everyday life.

By appointment

On the table.

The main thing is the strength of the structure.

Adhesive based. Products in the form of a circle, one side is glued to the phone, imitating a support, which makes it possible to put the phone at an angle of 45 degrees.
On a stand. Fixes a device of any size. It consists of a bottom plate, which is installed on the table and a clamp, in which the gadget is placed.

Universal.

If you are a creative person, then you will find the makings of a phone stand in any item.

There is an option when the bottom side of the holder has a mount that can be attached to a table or any other surface. The base of such a device is usually flexible and rotates 360 degrees.
The second popular option: in the form of a flexible tripod that can take absolutely any shape. This type can be used: on a walk, in bed, while washing dishes, in a car - absolutely in any convenient place.

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home.

In auto.

It is very convenient to purchase a magnetic holder for the car.

Installation principle: one side is attached to the device with a magnet, and the other to any accessible place in the car.

Phone stand made of unusual and improvised materials

Stationery binders

The device is strong enough and able to hold the phone.

If suddenly in the office it was necessary to fix the phone in a vertical position: here's how to quickly make a phone stand from improvised materials with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel-colored paper clip. We take two binders and fasten them together. We put forward one paper clip in the direction of the phone.

Using pencils

Try making a phone stand out of pencils.

Materials needed: 6 pencils and 4 rubber bands. We assemble a three-dimensional triangle: a tetrahedron. We fasten the ends of two pencils together and put the third one between them.

Important! To build a design, you need to take pencils with rubber bands at the ends to avoid unnecessary slipping.

bottle models

To make a model from bottles, prepare the material: any bottle from a cleaning agent, dishwashing liquid or shampoo, scissors.

Bottom line: the work should resemble a pocket.

Important! The size of the bottle should be at least twice the length of the phone.

Cut off the neck of the bottle and the front wall to the middle. This stand will be relevant for use while recharging. To do this, make a hole for the charger in the upper back of the container. Fold the phone inward, and insert the charge first into the hole, then into the socket.

Such a model can be painted, decorated with paper or cloth.

paper clips

The variant with a paper clip will require minimal costs and time.

The paper clip must be straightened into a straight line. We bend both edges of the paper clip upwards, retreating 1 cm. Then we retreat 4 cm from both sides, this part of the structure should fit snugly against the table, like a support. The next step is to bend the paperclip in the middle up so that the previous bent parts remain even, perpendicular to the table.

From a credit card

Set the resulting zigzag on the table, the work is ready.

Place an old, unnecessary credit card in front of you in an upright position. Step back from the edge 1 cm and bend the edge towards you. Divide the rest in half, bend, but in the opposite direction.

From Lego constructor

Take a wide plate - the basis of the children's designer.

It is necessary to fix several bricks from the designer on the plate, in order to support the back panel of the phone, the angle at which it will be fixed will depend on the height of the wall. To fix the device on the sides, take a few more identical bricks and fix them on the base.

From a cassette case

We insert a mobile device into the pocket where the cassette was once stored.

If you have an old cassette cassette left at home, it is very easy to create a holding structure: open it as far back as possible so that the part with the cassette pocket remains in front, and the cassette cassette top cover is placed on the table.

DIY phone stand made of paper and cardboard

Attention! Before you make an origami paper phone stand with your own hands, find and prepare the patterns you like.

You can make a small phone stand with your own hands from the simplest materials.

Folding cardboard stand. You can make a phone stand out of thick cardboard. Take a sheet of cardboard and cut out a figure: 10 by 20 cm. Fold it in half. Step back from the fold 2 cm and at an angle of 45 degrees cut the cardboard with scissors, not reaching the edge of 2.5 cm. Then change the angle at which you cut, it should be perpendicular to the bottom edge, in this position cut another 1.5 cm, lower the corner of the scissors 45 degrees and cut 1.5 cm down and then again perpendicular to the bottom edge, to the end.

Homemade cardboard smartphone stand.

Cardboard triangle. Before you make a simple cardboard phone stand, prepare the materials: a strip of cardboard, pushpins, glue or tape. Take a strip of cardboard and fold it into a triangle. Fix the edges with glue, tape or buttons.

In 5 seconds, you can make a solid and strong stand for your phone.

From a bushing. An excellent do-it-yourself phone stand made of cardboard will come out from the remaining paper towel sleeve. The wide sleeve must be cut in half. In the resulting part, cut a horizontal hole where the phone will fit. From the buttons you need to make legs so that the stand can be placed on the table.

Here's how to quickly and easily make a functional do-it-yourself phone stand out of cardboard.

Origami. A good paper phone stand will come out of a regular A4 sheet. There are several schemes by which you can fold an excellent support for the device. Knowing how to make a paper phone stand, you can always fold it in a few minutes and enjoy it.

Origami paper phone stand.

DIY phone stand made of wood

We take a wooden beam and make a blank out of it, aligning and processing the edges. Attach the gadget and cut it to size. Corners must be rounded and sanded. Having made the markup for the grooves, cut them out. Take a chisel and carefully clean the cut grooves. Sand the work again before oiling.

Homemade and original stand is ready.

DIY phone stand made of wire

Using ordinary wire, by twisting in a variety of ways according to the schemes, you can create an original holder for a mobile phone. The main thing is that the weight of the device is evenly distributed on the homemade holder.

The advantage of this DIY phone stand is that you can place your phone on it both horizontally and vertically.

Everyone knows why and when you need a phone stand, knowing the quick ways to create it from improvised means, you can always comfortably watch a movie or do household chores and chat with friends via video link.

Also, this stand can be used as a holder for tablets and e-books.

VIDEO: How to make a phone stand.

50 variants of original phone stands:

Now it is difficult to find a person without a mobile phone, which has become an integral part of our modern life. And every phone requires regular charging from the network. When all family members charge their mobile phones and gadgets, it seems that the room is entangled with numerous wires that often get tangled and get in the way. Savvy craftsmen came up with a holder for charging the phone especially for such cases and shared with the world how to make it with their own hands!

In such a case, both a smartphone and a wire will fit, and the bright appearance looks much more pleasant, more aesthetic and more modern than just a phone lying on the floor. A holder for charging the phone was made from a bottle of Johnson`s cosmetics, pasted over with a colorful paper napkin using decoupage technique.

How to make a DIY phone charger holder?

Everything is very simple. We find a suitable plastic container. Johnson`s products are perfect for the holder due to the elongated oval shape. We outline the outlines of the future cover with a pen and cut the workpiece with sharp scissors or a knife.

A cut bottle will be easier to wash and clean from cosmetic residues. Make sure the inner surface is not greasy. In the protruding part of the holder, cut a hole suitable for the plug of your charger. Then carefully sand the entire surface of the bottle and the edges with sandpaper.

You can decorate the holder with anything, not only decoupage napkins. You can try to paint it with acrylics, wrap it with threads, stick ribbons and beads, pebbles, twigs and shells - let your imagination run wild! If you decide to follow this example, then prepare a bright paper napkin, decoupage glue and a sponge (brush).

Carefully glue the bottle with a napkin, also covering the outer part with glue (or varnish).

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

In the household, we use a variety of cleaning and detergent products. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.

paper clips

The simplest and most affordable stand option is an ordinary metal paper clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.