How to make an electric match for a stove from a battery with your own hands. Life hacks and crafts from a battery Battery and foil lighter

To remain without fire on a campaign is a serious nuisance. Just imagine that your matches are damp from the cold and humidity, and the lighter is not observed nearby ... By the force of friction light a fire it is unlikely that it will work out, you must admit it.

In order to be ready for any situation in life, remember this life hack. It turns out that you can very simply make a lighter of two items that are likely to be with you. All you need is a battery and a piece of foil. A wrapper from gum, chocolate or from a pack of cigarettes will do. Watch the video on how to do it!

Battery and foil lighter

Simple enough foil cut such two figures and attach them to the battery from both ends. As you can see, the fire appears instantly! Take precautions. When doing this trick, keep the battery away from your face and flammable objects.

This life hack can be useful to everyone, so don't forget to show it to your friends.

This is a real creative laboratory! A team of true like-minded people, each of whom is an expert in their field, united by a common goal: to help people. We create content that is truly worth sharing, and our beloved readers are a source of inexhaustible inspiration!

This post has a great idea on how you can make an electric match with your own hands. To do this, you will need an 18650 battery, electrical tape, nichrome wire, nippers, tongs, ordinary wire, 2 clinic, a stationery knife, sandpaper, a plastic clamp.

If you don't want to make such a design yourself, then take a look at this store, which is interesting for lovers of all kinds of useful and inexpensive things.

Actions step by step

First you need to take the wire and align it perfectly. A small piece will suffice. Now you need to cut it in the middle. It turns out two contact wires that need to be attached to the poles of the battery and bent at an angle of 90 degrees. Now we take one wire, apply it to the battery and bend it approximately in the middle. We do the same with the second wiring.

Now we strip these two wires from the insulation on the side that will lie on the battery. We install one wire on the battery and fix it with electrical tape. At the end of the second piece, make a ring with tweezers. We also fix it on the battery with electrical tape. Next, we take a nichrome wire with a diameter of 0.4 mm and wind it on a thin screwdriver or a nail, make 3-4 turns.

Now you need to pull out the metal parts from the two terminal blocks. Next, you need to take a battery and leave 0.5 centimeters at the ends of the wire. We fasten the terminal blocks to these contacts.
We take a nichrome wire spiral and bend the contacts. We insert the spiral into the terminal blocks and fasten it. We install the clamp between them. The electric lighter is ready. Now you can check it

The battery operated electric lighter can be charged using a standard charger.

The second model of a homemade electric match

In this plot of the TOKARKA video magazine, we will consider a solid and difficult-to-manufacture model of an electronic match that will perfectly serve when you run out of gas or gasoline. It runs on a single AA battery or rechargeable battery. In this case, a 1.2 volt battery with a capacity of 2400 milliamps is used.
The head part is made of duralumin. The button is made of brass. The switch has a contact pad and an outlet for the filament. The other platform will be outside, it will be fixed with a small screw. There is a spring from the remote control inside the case. A battery will be installed on top of it.

Studs from the motherboard's contact pad are used as racks for filaments. Copper wires of sufficient rigidity can be used instead.

Nichrome thread was used from a faulty hair dryer. It is necessary to select the length of the filament so that it does not play red-hot. It is desirable that the temperature on it be 500-600 degrees, but no more. When it gets reddened, a reaction occurs with air and it will gradually burn out, so you have to change it. You can experiment and find the temperature at which the coil is very hot, enough to ignite objects, but not hot. It may be a dark, dark cherry color, but not bright.

The extraction of fire has become one of the most important events in the history of mankind. Today the problems with the production of fire have been resolved and this process is as simple as possible and accessible to everyone. However, it is possible to produce fire in a completely unconventional way for today, for example, using a conventional battery.

More details on how to make fire with a battery:

To do this, we need a finger battery, scissors, a piece of cotton wool, and foil. It is important that the foil is double-sided, that is, paper, on one side. You can find such foil in a pack of cigarettes or chewing gum, and so on.

So, the materials are ready, you can start producing fire.

The first step is to cut off a strip of foil half a centimeter in diameter.

After that, you need to bend it inward. Next, you need to cut the bent foil so that the bent part has a diameter of no more than a millimeter.

The next step is to put some cotton wool on the foil and connect it to the battery. After a few seconds, the cotton wool will start to smoke and ignite.

This is the first way to get fire with a battery, there is another way that requires two batteries.

Again, the first step is to cut off a strip of foil. This time, the strip should be a centimeter in diameter. It is also necessary to bend the foil and cut a piece like the first time. In this case, the middle part this time can have a diameter of two millimeters, since this time we will have to use two batteries.

You also need to take a piece of cotton wool, also wind it around the middle part of the foil. This is where the difference between the two begins. This time, one end of the foil should be connected to the minus of one battery, and the other end should be connected to the plus. The free parts of the batteries, that is, plus the first and minus the second, must be put on the remaining piece of foil and wait for the magic to start. After a few seconds, the cotton wool will ignite, which was required to be proved.

Thus, you can make fire in any conditions and in any place, even if you do not have a working lighter at hand. This way of getting fire will also be a great way to show off to your friends. In addition, this knowledge will certainly be useful to those who like different ways of surviving in difficult conditions.

Attention!!! Observe safety rules. When doing this experience at home, use a small amount of cotton wool, otherwise you could get serious injuries and lead to a fire in the room.