In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories also appeared ...

From Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge variety on store shelves and on the Internet. Often, an ordinary holder, case and other gadgets to give a mobile device character and style are far from cheap. Therefore, a do-it-yourself phone stand is an excellent solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques to help everyone do what they like best. So you should turn on your imagination and use all the ideas.

What can be used to make a stand for a mobile?

Creating something on your own provides ample opportunities for creativity. A do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; plaster; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories you have, the more interesting your mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY phone stand made of paper

It would seem that what can be done from ordinary sheets of paper? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white, which will then be painted; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate are also worth keeping at hand.

A well-organized space will help make sure that your phone stand will be decorated with your own hands in a matter of minutes. Consequently, the person who implemented it will have an excellent opportunity to become the owner of a beautiful and convenient mobile accessory.
Sequencing:

First you need to figure out what shape the stand will be. After you need to draw templates of the required size on a sheet of paper. Elements for the product are cut out on them. Then carefully, according to the scheme that was previously drawn or printed from some website, we glue the necessary parts. After that, follow wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, you can use various sparkles, buttons, beads and other small beautiful elements. After decorating, the phone stand can be considered a ready-made stand. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile, because it will always be in its place.

DIY wood phone stand

There are many options that you can use to translate any idea into reality. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, sketches and ideas alone are not enough. In this case, you will also need:

special equipment; skills; ability to work with wood.

Before you make a do-it-yourself phone stand, you should analyze your actions. If you have not previously worked with a tree, then it is better to rely on a paper phone holder. And if you have experience, then for work you need to prepare:

wood from which the structure will be built; tools for working with wood; product diagram; felt-tip pen, which can be used to draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the existing tool. Then you need to take control measurements and find out if the mobile phone fits into the cut out connector. After that, you need to glue the prepared parts. The next step is to smooth the product. This can be done with a file or a special device powered by the mains. When the surface is smooth, you can paint the finished shape with some color. After painting, you must wait for the product to dry. The work is completed by gluing the accessories chosen for this mission. At the end of the completely finished structure follows open with varnish, which will give shine and aesthetics.

In general, making a wooden phone stand will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand that you have created with your own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth seeing what interesting accessories there are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can come in handy in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

If you get used to it, you can not only use such a product for yourself, but also donate it. Therefore, it is worth making a few spare coasters: suddenly someone suddenly invites you to visit, and there will be nothing to give! And a stand for a mobile phone will always come in handy, even if a person already has one, then the second will never hurt.

How often, while at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. Our step-by-step master class will tell you how to do this.

How to make a do-it-yourself phone stand: options for the office and auto

Whether in the workplace or in the car, we all need to always be in touch. At the same time, I do not want to spend a lot of money on expensive coasters, because they can be made from waste and worn-out materials.

Card stand.

The simplest version of a phone holder is a card stand. To make it, you need to carefully bend an unnecessary plastic card in two places, as shown in the photo below, without allowing it to break.

Experience shows that a plastic card holder is very reliable and can even withstand air travel in times of strong turbulence.

Stand made of stationery clips.

To make a phone stand from stationery clips or binders, as they are also called, you need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and the resulting structure should be placed on the table so that the larger clamp rests on its surface.

Similar coasters can be made from clothespins in five minutes.

Paper clips make a great option for a car stand. To make it, you need to disassemble a large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone, it is recommended to wrap metal fasteners with threads in several layers. We return the holders to their place, additionally secure them with adhesive tape and clerical elastic band. We attach the clamp to the ventilation louvers. The phone is securely fastened between the metal parts of the binder.

Paper stand.

Plain office paper folded in a certain way can even support the weight of a large smartphone. To make a paper stand, you need to measure the dimensions of the phone and adjust the pattern below to fit them.

Cut the piece out of paper, fold it along the dotted lines and insert the side pieces into the slots. The good thing about this design is that it allows you to charge your phone without removing it from the cradle.

We study popular options for coasters for home comfort

A desk phone stand for a home should not only be comfortable, but also durable, stylish and fit well into the interior of your home. Consider the options for such products.

Stand made of newspaper tubes.

This phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several long dyed newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We put knitting needles or wire into the extreme racks, so that it is more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the "string" technique or with chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

We braid a rectangular blank of the required length. We take out the knitting needles or wire. We carefully fill and cut the ends of the posts. We give the workpiece the necessary curved shape, if necessary, slightly moistening it with water.

Likewise, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. We cut off and hide the excess. We coat the product with glue, if desired, paint it additionally and cover it with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

A stand made of origami modules.

Modular origami is a fairly young, but very popular type of needlework. With its help, you can make many unusual and original gizmos, including a phone stand from modules.

To make the stand, you need blue and pink double-sided paper. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. It requires 28 blue modules, which must be connected together and closed in a ring. In the same way, we make out three more rows. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row, put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. In the next row, on the pink area, we put three pink modules. We begin to design the curly edging of the stand, as shown in the photo below.

In the back part, we form a pattern in the form of a heart, above which we install a row of blue modules. Tighten the stand gradually until a triangular wedge forms at the back of the stand.

The module stand is ready!

Related videos

We suggest watching the video tutorials below on making other options for phone stands.

Proposed for construction, a phone stand for a car will be extremely useful for drivers who often use a phone. She will solve problems with finding a phone during a trip. Thanks to the simple and reliable design, the work does not take long.

Step 1. Tools.

To create a rack you will need:
1. Aluminum tube with a diameter of 47 mm "f. 4";
2. Connecting angled pipes in 45 ° and 90 ° (aluminum or copper). They are cheap and sold in any hardware store.

3. Solid wooden sticks (you can take sticks from ice cream);
4. Epoxy glue or any other glue with similar qualities;
5. Phone case or case;
6. Cable ties (they will be needed to secure the cover);
7. Hacksaw;
8. Ruler;
9. Knife.

Step 2. Assembling the frame.
Before starting work, you should decide on the location of the telephone rack. It should not interfere with the use of the audio system, recharging and other daily activities in the car. Only then can you start measuring.

The aluminum tube needs to be cut into 3 pieces. The shortest part is attached to the 45 ° elbow tube. The horizontal part (about 5 cm) connects the corner tubes at 90 ° and 45 ° "f.2.1 - 2.2". A vertical tube (approximately 10-13 cm) will support the stand itself. All pipe connections must be greased with glue so that nothing falls off during movement.

Step 3. Attaching the cover.
On the back side of the cover we make 3 pairs of cuts (the depth of the cut should correspond to the ends of the ties). The incisions are parallel to the tube, which will subsequently be attached to the sheath. We pass the ties through the holes and tighten them a little (the main thing is not to overdo it). We tighten the long tube of the frame with ties as shown in the photo. Cut off the ends if they are too long.

Next, you need to cut the wooden sticks in half, insert between the cover and the aluminum tube and grease with glue.

Modern means of communication perform many functions, so it is often necessary to install a gadget on a desk. The easiest way is to purchase a ready-made device in the nearest store, or you can make it yourself. There are many ways to make a phone stand out of scrap materials and stationery.

Similar articles:

The most common material used for phone stands is plastic. To make a smartphone holder with your own hands, you can use everything that is available in every home - paper clips and binders (clips), wire hangers for clothes, paper, wooden planks and even a children's designer. Self-made coasters will not only be comfortable, but also original in design and size.

There are a few easy ways to quickly create a functional and great gadget stand.

From stationery binders

Students and office workers are familiar with special clips for bulky reams of paper called binders. If you have holders, the easiest way is to make a do-it-yourself phone stand out of them.

To do this, it is enough to connect 2 elements to each other, and bend 1 metal end towards the phone.

You can also fasten 2 binders with a piece of cardboard, and insert the smartphone into the plane between the metal ears. Despite its small size, such a device is able to hold even a phone with a large screen diagonal both vertically and horizontally.

From the Lego constructor

If children live in the house, there will certainly be a plastic construction kit with parts of different sizes and colors. There are no special instructions for making a phone stand, you just need to select the appropriate elements and connect them in any order. The main thing is that the design is stable and attractive.

From a paper clip

Of the many ways to ship your smartphone, the fastest and easiest is the one that uses a simple, oversized paper clip.

To make a fixture, you must first unbend the clamp in a straight line. Then bend it again so that the middle part creates support for the back wall, and the hook-like edges prevent the phone from sliding forward.

From a wire hanger

If you have a wire hanger for clothes, you can make an original stand for your smartphone or tablet. It only takes pliers and a little patience to work:

1. First, you need to bend both edges of the hanger so that they are spaced from each other at a distance equal to the width of the gadget. The edges are squeezed with pliers until they are fully connected.
2. At each end, 2 folds are made about 3-4 cm in size.
3. In the next step, the hook is bent at an angle of 90 ° and rotated in the direction of the wings.
4. Then a hook is made at the end of the upper part, for which the inner element of the hanger is hooked and fixed.

The design can be improved with rubber tubes, which will provide an anti-slip effect and make the product more attractive.

Shampoo bottle option

An empty shampoo bottle can turn into a handy and beautiful phone holder. The advantage of such a device is that it can be hung on the power supply of the charger and eliminate the risk of snagging wires and dropping the gadget on the floor.

To make the holder, you will need a plastic container of the required size, a marker and a stationery knife. First, markings are applied to the bottle for future cuts, taking into account the depth of the phone, the location of the holes for the plugs and the dimensions of the power supply. After the layout is carefully traced, all the lines are cut with a knife, and the edges are cleaned. If everything is done correctly, the holder can be easily slipped onto the charger plug and plugged into a power outlet. The gadget itself will fit freely in the bowl, excluding the bending of the wires.

To make the device look more attractive, its surface can be pasted over with a cloth or bright paper, painted with a paint suitable for plastic. The advantage of such a stand is its low cost, since the material intended for disposal is used. In addition, a wide range of colors and container sizes are available.

Popsicle sticks option

You should not rush to throw away the popsicle sticks. They can also be used to make a beautiful phone stand. Depending on the project, the structure consists of several elements or includes a dozen components. Sticks can be glued with PVA or a glue gun. After the holder is ready, it is recommended to paint or varnish it.

From paper

One of the most common materials used to make a do-it-yourself smartphone stand is paper or cardboard. With the right design, you get a fairly sturdy product.

The easiest way is to create 2 triangular blocks of different sizes. One will serve as a base, the other will support the bottom of the phone. After the blanks are completely dry, they are fixed on 1 paper rectangle.

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often you need to keep them not in your pocket, but on your desktop, so a smartphone stand is a must for everyone. There are many ways to make a stand for your phone, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a do-it-yourself phone stand out of wood is to just make it out of a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile in the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to cope with the functional load. As a basis, such a homemade phone stand can be of any wood and can be shaped into any shape. And the manufacturing process itself is limited by the fact that a groove is simply made in the board with the help of a router. The groove can be made even or at a slope, depending on the angle at which the device should be.

When you make a smartphone stand with your own hands, it is important to grind it well, especially in the area of ​​the groove where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will ruin the appearance of your gadget.

Complex construction

If you want your mobile device to be always in sight, not to get lost in the documents and at the same time your table looks beautiful, solid, then the stand must be appropriate. To do this, you can make it not just from a board, but from several parts. Don't worry, you don't need a lot of tools or material for this either. The most important thing is not to rush and carefully think over the design that your homemade product will have.

A good stand for a smartphone with your own hands, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small boards.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a cut is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely so that the stand is more stable and has the correct inclination of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone just getting started, it can be challenging to find the right angle for the slot. But this is not difficult to do, it is enough just to attach two parts to one another at the planned angle and just make marks on the side at the end. Well, besides that, so that the phone does not slip, you need to make a groove on the horizontal plate, or stick a small bar that will be a stopper.

After all the slots are ready, it is enough to simply grind the stand well so that the irregularities do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a stand for a phone of this design, for example, you can make a curly vertical part of the stand, which will significantly improve its appearance. Shapes can be a wide variety of hand, leaf, animals, and in general whatever you come up with, since the tree can be given almost any shape.

How to choose a stand design

There are quite a few ways on how to make a smartphone stand, but wood options differ not only in durability, but also in their beautiful appearance. In addition, they also look much more noble than other materials, since a properly selected wooden accessory will adorn any design, regardless of its style.

Therefore, to make your hand-made mobile phone stand beautiful and original, try to choose the right design, size and color. Of course, do not forget about such parameters as functionality and stability, since if the cell is dropped, it can simply be damaged.

You can make a variety of phone accessories at home and you don't need to have a special tool for that. In most cases, with due diligence and patience, you can do with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small pieces and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you make is unique, and not like everyone else's. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But really bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made by yourself. The second option is much better, not only in terms of economy, but also in terms of individuality.

Even if you do not have experience in making any wood crafts, you should not be upset, as there is nothing difficult about it. It is enough to carefully plan everything, calculate what tools and materials will be needed and only after that start the work itself. If something doesn't work out for you, then you can try again, rarely anyone succeeds in doing everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn how to do everything right.