Hanger outdoor for clothes with their own hands. Hanger do it yourself: master class of creating original homemade hangers clothes hanger Wall-mounted wooden

Coming home, we try to quickly remove shoes and outerwear. Just throw it on a chair or dresser - a faithful way to remember the findings of the wardrobe and bring even more mess into a small room. The problem is solved 2 ways - installation of a wardrobe or equipment of a small hanger in the hallway, in case there is very little free space.

About these small storage systems and will be speech in today's material. Today it is necessary to choose furniture for not much difficulty, and regardless of the size of the room. But if you have failed to decide on the right model, rely on your own strength, after preparing the sketch.

Handy manufacture of suspension

For hospitable hosts, the product is paramount importance, it is it used to accommodate things in the corridor. Traditionally, they have it in close proximity to the entrance door so that no one walk in the dirty shoes by floor. The variety of this furniture is impressive even experienced designers. Pick up a beautiful model, the corresponding interior is easy. It can be made and own.

Wall furniture must match the 3rd criteria:

reliability;
constructive light;
convenience.

Before, it is necessary to determine in advance with its appearance and functionality, clarify the material from which the walls are made.

In the case of plasterboard, wall furniture is not suitable. The optimal option is outdoor solutions. From mounting to the surface of the finishing material, it is better to refuse it initially, in order not to restore it.

For fastening products to such walls requires special dowels, special tools and equipment. Without preparatory activities, the design may not withstand the weight of furniture and things that is fraught with a drop in the design.

In this case, outdoor models with a number of hooks look more advantageous. They do not fall, because things are evenly distributed over the entire length. The main advantages of such products are mobility and minimum weight, with high reliability. For the hallway, it is easiest to make a hanger with your own trees, chipboard or fiberboard. The finished product is decorated with an ornament, the pattern is either just painted paint, opened with varnish.

Step-by-step instruction for the manufacture of wooden hanger

Palm Championship traditionally holds natural wood, since it is easy for it to give any shape, in accordance with the prepared sketch.

The most beautiful hangers are made of wood. The structure of this wood is different, so screwing the hooks, you must be extremely neat.

Previously, it is necessary to prepare the following tools and materials:

set of wooden boards of suitable shape and sizes;
screwdriver;
sandpaper (Microns);
lobzik;
hooks;
hacksaw with small teeth.

Prepare wooden billets of suitable size. Material must be stuck. To form a perfectly smooth surface, the tree passes the "sandpaper". As for the finish, here you can be guided by your own taste - open the surface of paint, varnish or stick on it with decorative paper. At the final stage, hooks (screwdriver) are attached to the board.

Fastening to the wall

The manufactured hanger in the hallway with your own hands should be not only beautiful and comfortable, but also reliably fixed to the wall, withstand the weight of the outerwear. Specialists identify 2 ways to fasten furniture.

The easiest way is to drill the hanger through self-drawing, attaching it to the wall.
A more complex method is to prepare 2 metal loops on the back of the hanger, and then with their help to mount the hanger.

The process is completed - wall-mounted furniture is ready for operation.

Before making a final decision on the manufacture or acquisition of hangers for clothes, it is important to consider a number of nuances. First of all, the availability and area of \u200b\u200bthe free zone for furniture placement. In the second - style of the hallway and other rooms in an apartment or house. Third, the height and place of furniture placement.

Criteria for selecting hangers for a corridor or hall:

the product should visually echoes or supplement the main style of the room;
for the classic interior, a wall hanger is suitable;
the decoration of minimalism will be the outdoor model.

Floor furniture is distinguished by conciseness and ease. If necessary, it can be quickly removed or moved to another place. This is one of the best options for the hallway of the mid-size. Be that as it may, and the hanger is an important practical attribute of any interior, regardless of the size and style.

This furniture takes at a minimum of space, but accommodates a large number of things. For each item of the wardrobe, a separate hook is given, so that there are no problems with the search for the desired things. Near the entrance door you can organize a compact storage system, in which there is a place and hats, and umbrellas, and bags.

Fixing hooks and hangers

There are several main ways to attach hooks and hangers to the wall. You can go through the smallest resistance and secure the product without special equipment. But connoisseurs of sophisticated and original solutions over this issue should be reflected separately. In the case of wooden hangers, it is often limited to metal hooks. Such systems are attached to the wall on the screws.

As for hooks, they differ in the method of fastening:

magnets;
suckers;
adhesive segments (with horizontal or vertical orientation).

It requires a minimum of time and practical skills to install them, so they have gained tremendous popularity in consumers. But the elements listed above are also a significant drawback - they do not withstand a big weight (the dumble or a fur coat will not be hung on them). The region of their use is limited to head removes and light accessories.

Outdoor hanger - Mandatory attribute of any hallway room, be it apartment or country house. Its price depends on the originality of the execution and quality of materials. The easiest option is to purchase such a design at the nearest furniture store. But there is a different way out of this situation, so as not to overpay - make an outdoor hanger for clothes with your own hands.

A little theory from the course of physics

To achieve this goal, a little knowledge of physics will be required, as well as brew materials and tools. Let's start with the first one. The basic requirements for the floor hanger are stability and absence of sharp elements so as not to damage the floor, wall or clothing.

Stability is achieved in several ways. If the floor hanger relies on one basis, as a rule, in the form of a crosslinor or a circle, then it is necessary to make the center of gravity to be as low as possible. You can do this using more heavy materials - massive wooden bars or metal.

If the space of the hallway is allowed, it is advisable to install the hanger for two, and even better - three points of the support. In the first case, the broad grounds will need that your attribute does not fall on the side, because it is evenly placed by clothing problematic. Therefore, if possible, you need to choose a support at three points.

So that the base of the floor hanger does not scratch the floor, it will be necessary to use materials as a "sole" that will be softerly coating.

Tools and materials

Required tools

So, here is a list of tools that will be needed for the manufacture of outdoor hangers:

cross (figured) screwdriver;
self-tapping screws of different lengths and thickness;
sandpaper;
drill;
dried (set);
hacksaw;
ax.

Set of self-sustaining

Also have to be stocking in the following materials:

a dried tree (cherry, sea buckthorn, etc.) or several such if the hanger is planned with several points of supports. You can buy ready-made processed blanks;
bruks (assentful, no less than 60 cm long, the optimal section is 7x7 cm.);
metal wire (for hooks) or ready-made decorative hooks;
carpentry glue;
a piece of rubber (or silicone) with a thickness of no more than 3 mm.

Wooden bars for work

Instructions for the manufacture of outdoor hangers with crosses and hooks

First you need to free the stem from the bark, as well as coarse bitch. Of course, it may seem that with the bark the hanger will look much more naturally, but over time it will crumble, and the garbage is to deal with all residential premises. In addition, small insects can be in the cortex. Yes, and clothes will cling to irregularities.

You can free yourself from the bark using an ax or a massive knife. As soon as this task is completed, it will be necessary to walk several times on the remaining part of the emery paper - first coarse, then shallow. After grinding, the surface will become smooth, and the likelihood of hooking clothes will be minimized.

The following task is to make the basis. As in construction, only the design will be stable and durable, which is granted integrity. Therefore, the base and tripod of the hangers must be one.

The base and tripod of the hangers must be one whole

You should not first make a cross, and then to attach the body of hangers to it from above - this design is very quickly loosened and can fall out of the base under the weight of the clothes.

Here is a rule that you should adhere to, the lower edge of the tripod should be flush (that is, on the same plane) with the base sole.

We proceed to measure the diameter of the barrel. We need it in order to choose a bar of the appropriate width. If the bars are wider, then you need to cut the knife along to the desired size.

The standard heating height is in the range of 180-200 cm. For them, it is necessary to make a crossover with departures from 25 to 35 cm. Therefore, we will need 2 vehicles with a length of 60 cm. That we will cut exactly in the middle to get 4 30 cm blanks.

Now the difficulties begin. Even if you have to heal and attach these 4 bars to the round trunk, the design will be unstable, and after the first fall due to uneven wipers, it will simply fall apart.

Therefore, we will proceed as follows: We will put the barrel to the floor and stick the preparations from the four sides to it. It will not be possible to connect them in this form, so we will make inserts in the form of triangular wooden elements on the bars exactly in the part of it, where the body of the hanger is. Such "triangles" are attached to the bars with the help of self-tales, and also to the tree trunk - in exactly the same way.

To strengthen the design, in those places where "triangles" will be attached to the timing brushes and to the trunk, it is necessary to first drill with a drill hole, with a diameter of 2-3 mm. Less than the fastener diameter.

If you simply turn the screws into the tree, that is, the likelihood of cracks that weaken the design.

After this procedure is completed, you need to fill in the resulting drilled spaces with glue, and only after that start turning the screws.

The obtained design of the floor hanger can not be ideal in terms of sustainability - it often rolls up with one brush of crossfins on another. To correct this drawback, you need to use pieces of rubber, which should be pasted on the lower part.

So that the tires perfectly glued to the surface of the tree, it is necessary to go through the wood surface with sandpaper and make several scratches in different directions.

The frame is ready, now you need to give a hanger functionality - add hooks for outerwear, which can be remote, that is, to be at some distance from the trunk. There is one rule: the center of gravity of hanged clothes should not go beyond the limits of the cross, otherwise the design will be unstable and falls.

No matter what hooks are used - homemade or decorative, it is impossible to fix them directly to the trunk, since the floor hanger will quickly come into disrepair. You can do the following: Cut from available squares Square, the length of the sides of which will be somewhat larger than the diameter of the barrel used as the body of the hanger. Before fastening the "square" to the top, you must first attach hooks to it.

Decorative will suit more, because from the wire of a beautiful form to achieve very difficult. Such hooks are attached to the tree, as a rule, with the help of one or two screws.

If there is a time and some skills in working with a tree, then with the help of the chisel, you can cut into the squares connected to the top of the floor hanger, so that the base of the hook is subsequently "drown". This is a more aesthetic solution than just sitting on the self-tapping screw.

After all hooks are attached, a square wooden element is needed to connect to the top of the barrel. This can be done by one or two self-stakes according to the technology described above.

The final stage of work is to give the aestheticity of the obtained floor hanger. First of all, it is necessary to close the lower part - the cross with all the fasteners. This is allowed to use fabric, rattan, wooden or plastic rails. The hanger itself can be painted with a protective layer of paint or varnish - both natural color and any other, depending on the color gamut of the room decoration. The layer must be deposited at least 2 times.

Making Hangers for Suit

Scheme of outdoor hanger for suit

Outdoor hanger for men's suits has a slightly different design and is made of wooden bars.

You can make it by this algorithm:

measure and cut blanks according to a predetermined project;
carefully process them and polish;
make fasteners in the right places;
collect the hanger according to the scheme presented below;
perform finishing finish;
screw to the base roller wheels or glue rubber gaskets.

The ideas of making hangers for clothes do it yourself: photos and drawings of hangers for an entrance hall. Diverse options for making homemade hangers for clothes.

The clothes hanger can be made with your own hands from practically the girlfriend who are lying at home without a case. Folk craftsmen do not cease to surprise their ingenuity, this is a clear example homemade hanger for clothes from ordinary forks.

A similar option of hangers from metal spoons.

Clothes rack from the pallet.

Here is a clothes hanger from the pallet, and again the old pallet was applied. The wooden pallet is cut into two parts from each half of the pallet can be made along the hanger, it is enough to paint the workpiece and attach screws to the hooks.

Another option of the pallet hangers, the whole wooden pallet is used here, it is grinding sandpaper, staining the boards in different colors and attach hooks.

Wood hanger.

Such a hanger is more suitable for the cottage or bath, as hooks here are used wooden swirls, fixed in a wooden structure.

Hanger of metal profile and bars.

The design consists of several bars and metal profiles of fastened.

Wooden hanger with your own hands.

Here used a wide board with imitation under a piece of old wood, clothing hooks are made of bars and fastened with screws screwed on the back side of the board.

Wood is burned with a soldering lamp than and the original product texture is achieved, the final stage of the coating of the hanger with a transparent varnish.

In this embodiment, it was not without carvings.

And in this design, door handles are used instead of hooks for clothing, which can also be covered with paint.

An interesting option of hangers from boards.

Original homemade hanger in the form of a tree.

For the manufacture, a thick plywood is used, the contour of the pattern of the tree is drawn and is muffled with electric jigsaw. The design is painted and attached to the wall of the dowels.

Hangers for children's clothing.

Details of the hangers are cut from plywich from plywood and paint bright colors, so you can make a hanger in the form of animal figures.

Outdoor clothes hanger do it yourself.

The easiest option of the floor hanger for clothes from pipes, for the manufacture you will need a thin pipe from aluminum 2 - 2.5 m. The pipe must be used, as shown in the picture and clothes hanger is ready.

Wall hanger from pipes.

And this hanger consists of a drawing on the wall, the hooks for clothes are attached to the dowels right into the wall.

Relieved hanger with her own hands - the idea is fruitful. The theater begins with hangers; House too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing that looks out the guest - where to hang up the upper clothes. And if the hanger is clearly self-made, but convenient, stable and durable, positive renome owner is provided.

The second argument for making a hanger with your own hands, is prosecated: purchased prices are clearly disproportionate with production costs. A homemade clothes hanger will save quite visible in the budget amount. It is easy to make it, the material will take a bit, go into business and waste from repair. In most cases, you can do the tool.

These factors are especially felt, if the floor hanger is placed in the hallway. In addition, it can be a dryer, if its frame design, see further, because On such hangers, clothing is comfortable to hang on her shoulders, and the hanger moves away from the wall. If the house managed to harvest the dressing room, then the outdoor hanger is the optimal option. The cost of floor hangers is significantly higher than wall mounted, but there is nothing in the design, which would not allow to make an outdoor hanger on their own.

On the floor or on the wall?

The said is already enough to make a choice, just if the floor area was enough. However, the approach is completely attractive than an attractive hanger in a floor-type hallway:

Clothes raving on her shoulders will dry faster, not stretching; The collar and lining do not rush.
On a hanger width approx. 1.5 m is placed a seasonal set of clothing of the whole family, which will save on the closet and square under it.
The blatus is naturally attached to the outdoor hanger, which simplifies the work on the equipment of the hallway and saves its area.
With properly calculated sizes of the hanger, neither the wall from the clothes or clothes about the wall is not damaged.
The mobility of the hanger does not prevent the rearrangement of furniture; After moving the hangers, you do not need to close the mounting holes in the wall.

However, outdoor hangers are different, and not all of them are most suitable for residential premises. For example, to orders (from Star. Russian. "Order" - office, office, office) Hanger-lands, pos. 1-4 in Fig., Wash clothes on the shoulders are inconvenient. Because of the small area of \u200b\u200bthe support, they are twisted, especially loaded with winter wet clothing. To emphasize the functional damage to the product, such hangers call the lishes, and they often go to this name.

Types of floor hangers

The best option is the same theatrical dressing frame hanger, pos. five. Performed for residential premises it is complemented by shelves for hats, shoes and gloves / scarves; Perhaps an additional barbell for ties, pos. 6. The lack of "legs" of the hangers are confused under their feet. In trying to get rid of it came up with hangers - frames on the stand, pos. 7, but generally speaking, they roll even more than ordinarians hung. Another option is a hanger frame without legs, leaning against the wall; We still remember this. There are still frame hangers of a folding structure, but in everyday life they have almost no advantages.

If in the hallway with a place in general tight, then more suitable is still a wall hanger. Simple wall hanger-scab, pos. 1 in fig., Maximum compact, but it is not more convenient as possible, except that the next jacket does not fall from the next jacket. Hanger-shelf, pos. 2, it will not fall, if attached as it should, and hats / caps from it, too, but the wall and clothing rub each other.

Types of wall hangers

Wall hanger-panel, pos. 3, saves the wall, but not clothes. Most of all replete leather things on such hangers. Kozhevniki in a joke advise: how, they say, distinguish a sheep of face leather from her the knuckles? The first on everyday use the hanger-panel loses the view of 2 winter, and the second is for clauses. Given the cost of products from genuine leather, it is not good anywhere. Therefore, the hanger-panel on the wall for expensive things is often equipped with a soft upholstery, pos. 4. What is up to wall hangers with openwork shield, pos. 5, then in this case its value is only decorative: neither things, nor the walls he protects.

Floor hangers with lanam and a banquette

There are still floor-panel hangers with a stand, for example. in the form of a handy, chest or varnish, pos. 1 in fig. on right. This option is not from the best: someone once will be put on the lid, and the clothes removed from the hanger it will wake on the floor. Much more practical outdoor hangers-panel with a banquette, pos. 2. The flower under the seat is the matter of taste of the owners, if only he survives there, but a shoe or a flasher for her care accommodation in a box of a banquet place.

Clothes and keys

Regarding the hawk-panel at the amateur mastery, an additional opportunity appears, namely: to supply such a sidewall to the far from the entrance door of the edge. Perhaps not reaching up to bottom, with a force or a notch. Factory do not do this: the hanger must be designed for drinking clothes on the side. One sidewall does not interfere with this, but it is not known how the hanger will stand at the buyer, but to make the right and left hangers.

What gives such an add-on? Place for a key, invisible from the threshold. In the same place, on the side, it can stand in a trumulous or a cabinet, but the main thing is to be a random visitor to the eyes of the eye, and they are in sight, according to criminologists, a serious factor of spontaneous unlawful actions, without which, i.e. The temptation, the visit is not quite a trusty subject would be safely for both the owners, and for him. You can, of course, make the key luxuriously decorated and with secret constipation, but it is a considerable work and the cost of materials. And so - there will be a simple handus with hooks. Or only hooks, screwed to the sidewall outside the clothing section.

We assume that the suitable design is already selected, and we will do how to make a hanger. Preferably wooden: the material is noble, natural, easily processed. Do not forget other versions; In some cases, more comfortable. Let's start with outdoor hangers as the most functional.

Outdoor

Lovers embrace from the soul, which have a milling tool on wood, can immediately take up the floor frame hanger with legs. Completed from the tree of fine-layer hardwood (oak, beech, rhine, walnut, birch), it looks gorgeous, and in the width takes only 360 mm floor.

As a prototype, a costume hanger is well suited, you just need to make it higher and move up the trouser crossbar so that the shoulders can be hung on it. Instead of a tongue rod and handles, you can install the shelf, and the shoe shelf is mounted at the bottom. The drawings of such a hanger are shown in Fig.:

Wooden floor hanger drawings

With the specified other sizes, the structural and overall width (dimensions 430 and 460 compound) without compromising strength and stability can be increased by 1-1.4 m, i.e. The hanger will be already a family width to more than 1.8 m. self-orienting wheels, if complete mobility needs, are installed without problems.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and the bachelor can also be a skirt with women's linen. It happens, life is life. Clothes are also more convenient to hang on the hooks. Therefore, in frame hangers, sometimes on the main rod (the former trouser in the figure; height 1360) put on the hooks-slings. Their or shoulders, depending on the need, shifted the side of the Skop. But the hooks-runners under the fingers turn into the most inopportune moment. In the hanger of this design and similar to it, the problem is solved simply: the main rod for the shoulders, and still hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or profile metal or plastic pipes, see fig. Nevertheless, despite all the tricks of the design, their organic vices are not going anywhere. The same as the ordinal hung. But high labor intensity is added: to hide the connecting nodes, it is necessary to strain both hands and heads.

Hangers from pipes

From the pipes it is better to make a square base of the flooring-lamps. With the same withdrawable area of \u200b\u200bthe floor, the distance between the points of the support increases 1.4 times. If you still take the base, then weighing up to 1.7 m, it turns into a full-fledged hanger. Most suitable sewer pipes 60 mm.

A brief master class in pictures on the manufacture of the base of the floor hanger from the pipes is shown on the trail. Fig. Cut pipes - 150-300 mm, depending on how much gender you can give the hanger. In addition to them, you will need 3 straight tees, 4 straight angle and 4 plugs. Connections - on a glue for propylene or PVC, depending on the material of the pipe. Weighing - sand or small rubble.

Production of the base of the hangers of pipes

One of the comments to the original design begins with the question of about this: "Why was it possible to just solder?". Judging by the fact that then in the same comment, the angles of 90 with an obvious claim to professionalism are called discharges (plumbing taps are oblique tees), 2-3 more and as much exclamation are asked to an intercom.

Nevertheless, the author of the product, even if not knowing the sanitary terminology, decided the task quite in engineering. Hermetic junctions of a hanger for nothing, and the glue tube will cost much cheaper the rental chapter for propylene. Which, besides, you need to learn how to use, rewriting the material to the material. For a lot of reliability, you can reinforce with phosphatized (black) screws: on black their heads are not visible, and the hanger strength will not lose.

Note: Vfed in the original design, too, from the pipes, but the design of it, to be honest, not ... It would be better to drill oblique holes in the rack and insert some durable pins in the same glue; Wooden, metal.

Simple Rama

Scheme of simple wall-wall hangers from pipes

The frame hanger from the pipes can be without legs, just leaning against the wall with a slope. However, the slope must be negative. Between the wall and clothing on the shoulder should be at least 350 mm. If the tilt of the frame is positive (the upper crossbar is adjacent to the wall), then the lower "leaves" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, behind the lower crossbar or will be cling to the legs and it will beat the floor, or it will have to be attached to the floor, and this is very bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen on sale furniture you need to screw up? Is that special purpose, for example. rack. And that, there, too, try to do fasteners to the walls and, in the extreme case, the ceiling.

The scheme of frame hanger with a negative slope from the pipes is shown in Fig. Materials are the same: segments of direct sewer pipes 60 mm, angles 90 and direct tees. The withdrawn of the useful area of \u200b\u200bthe floor is zero. Below can be a shoe or a banquette. For mounting to the wall, so as not to bury a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help holding beams - stretch marks are attached to the wall of the pair of self-tales in dowels each.

Wall mounted

Simple hangers - Panels do not require a special parsing. How made a wooden wall hanger, see eg video.

Here we remember, firstly, about the hanger-sconce. Foldable, it can be very useful if a large company or a child gathered returned from the courtyard at least lick.

An example of a design of this kind is shown on the right in Fig. However, its creators were clearly guided by the principle: "Consumption is the basis of money turnover." The outer (folded form) side of the folding plate is inactive, and the locking mechanism is needed. And another single hanger for every day.

Compact folding wall hanger

Meanwhile, folding wall hangers are known since the time of Ancient Egypt. In the local climate, the upper clothes were abandoned by occasionally, in bad weather, but after socks it was necessary to dry. To keep a separate hanger in the edges where the rain and cold times a year not every year, there was no point, so they came up with such as on the right in Fig.

In folded form, the Compact wall hanger of the Egyptians was fixed by a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is the hooks of the hooks must be in 3/4 of the circle, then they will not fall off with them and with a folder. And without need, the whole hanger looks like a wand on the wall; On hooks you can hang bags, umbrellas, keys.

More about hooks

The original wooden hanger can be made at all without metal, not counting fasteners. Do not rush to throw out the New Year's pine or tree (only workpieces you need to turn upside down):

Video: Original tree hanger do it yourself

Best of all, such a hanger will look at the country, in a brusade or a skeleton house. Depending on the interior design - both in the urban apartment. It will greatly go into the bath: the touch of sparkling skin to the metal and unpleasant, and to some extent even is even attempting.

Hangers in children

Probably, all children scatter wear. It is not necessary to especially marry them for this: not known in the reasonable limits of chaos, they do not seek order. Who is against - answer the question of Friday to Robinzon Cruzo: "Why does God not kill the devil?"

Nevertheless, teach children to handle things as needed. Only a children's hanger so as not to cause explicit psychological rejection, it should look somewhat disordered. It is also very desirable that it is associated with a child with a favorite game or hobby. Examples of wall hangers in the children's type "Game / Hobby" are given to pos. 1 and 2 Fig.

Baby hangers

Universal method of this kind - hanger-tree, pos. 3. In the wood circuit, as in any fractal structure, order and chaos interact and complement each other, generating a harmonious whole. Do not forget to make a tree again, for example. From plywood from 12 mm, and as it should, with a step of no more than 250-300 mm, attach to the wall with screws from 6 mm in propylene dowels. Tree, it's climbing on it.

Outdoor hangers in the nursery for the same reason are undesirable: well, they will still get climb, and rumble. Therefore, if you already want a floor hanger in the nursery, you need to do this on which you can't fit, which is visible to pos. 4 and 5.

About Study Plywood

In any case, there are problems in front of the parents to which there are no small things: the consumption of material and labor intensity. Draw a complex contour on the grid on a whole piece of plywood is already not easy, then it needs to be exactly cut, which is even harder. And in the end it turns out that 60% or 80% of the material went into the departure, nothing more suitable. Needl, on the contrary, make a children's hanger tree from waste. Or uncoll down the one-piece sheet.

Build parts hanger-wood from plywood

The way for this has long been known: elemental cutting and assembly. If the wood is plywood, for the full strength of the finished product, every detail is gained from 2 layers, leaving acc. False and grooves, see fig. Fragments of billets are collected on PVA glue, a wood assembly or express (liquid nails). If the assembly on the PVA, fragments should be additionally copped with small nails with a snake with a step of 100-150 mm with an indent from the edges of 30-40 mm.

Collect a hanger-tree on the same glues, but now each connection must be made by the envelope tree screws. Then the gaps and fasteners heads (they need to drown them when assembling) are rubbed with a putty from sawdust of the same plywood on PVA. Such a tree and without painting, only under varnish, it will look solid.

Note: Just in case we will recall - all wooden parts of any wooden hanger before assembly need to be elapsed by the sandpaper of small numbers and treat the water-polymer emulsion or diluted water three-in-five PVA. After impregnation, before further work, they make a technological break until the details are completely drying (1-3 days, depending on its size).

And about the hooks - finally

Above on the illustrations, you most likely noticed the curved wooden hooks and others. Details of the hangers. They are quite possible to make at home. In production, dense small-layer, without defects, wood or water-resistant birch fane (BS varieties) bent heated with sprinkling or dry, but for homework, these methods are too complicated. More or less simply sprinkled only bamboo: the workpiece is boiled half an hour in a rapidly boiling water, after which it bends hands. In the case of bending on the template, the workpiece to it is needed quickly, until it has cooled, to climb a wide taper x / b or a strip of natural tarpaulin.

Raspil on wood

At home, it is easier to cut the blanks of the required configuration from the plywood sheet (any) or MDF of the desired thickness or twice the quadruple more by quantity, from a thin sheet material to dial it from the thickness. Cut the allowance for the first processing OK. 1 mm. The chopped blanks are tightly tightened with a package in joiner's visits or in a plug-in stripping from thick plywood and are processed by a rashpil on a tree in size, and then the skin is thoughtless. The rashpil is enough single, flat and semicircular working surfaces, see fig.

Billets are collected into the details described above. Face surfaces, if you need to hide the layered plywood structure, stick the film-self-keys with strips under the tree. After that, the part twice and three times lacquate acrylic varnish on a water basis; Nitrolac can spoil self-keys. It is not worth shaping (raging) with a plastic furniture edge: you need to accurately choose a groove under the anchor of the edge, for which the milling machine is required, but on curvilinear surfaces of the large curvature and the low-length edge still holds badly. And the details are saved by self-keys, under varnish, from whole wooden, not immediately differs from the master-chamber.

The hallway is a place in which things are usually stored for a way out, so it does not cost without hangers. Some people are attached to the wall of the board with nails, but it looks not very beautiful. Therefore, it is best to use a floor or wall hanger, which can be constructed independently. The product, created by its own hands, will not only save the budget, but also adds the dwelling of uniqueness.

Preparation of instruments and materials

Going to start work, you need to prepare all the necessary tools: drill, scolding, screws, hacksaw, centimeter tape. It is important to have the skills of contacting them, so as not to make a lot of mistakes and not harm yourself. To give a product of a neat and aesthetic look, you will need varnish or paint.

As for the materials, you will need:

Wooden bars or metal elements that will create a durable and reliable base capable of withstanding heavy jackets. You can use the base from an unnecessary artificial ate or from a strong lacker.
A column suitable in size that is easy to purchase in the finished form. The cheapest option is a dry and naked trunk of a young tree (without bitch and bends), treated with a skin. Its height must be equal to 15-20 cm.
Hooks, the number of which should be sufficient to freely be based on.

Glue designed to reliably fix all elements, including self-tapping screws.
So that the hanger stood tightly on the floor and did not slip, it is necessary to glue a thin rubber to its base.
To enhance the center of gravity, it is necessary to make a shelf for storing accessories that will need to be fixed over the attachment of the crosses.

Manufacturing process

First you need to create the bottom of the hanger. To do this, pre-cooked bars need to cut in half, handle the skin and combine at right angles. So that the joints of the connection were durable and not hacked, you need to make a deepening in the width of the bar and connect all parts. Then you need to cut four bar and attach them with the help of screws to the legs and the barrel, which will become a reliable support for the hanger.

You can unscrew the screws only after the holes made by the drill are ready. This will help protect the future product from the appearance of cracks, which can lead the piece of furniture in disrepair. The diameter of the self-drawing should be greater than the drill.

For reliable fixation, you must first lubricate the holes with glue, and then screw the screws.

For the manufacture of the upper part of the design, you need to attach a pre-cooked square with hooks. You can also attach four bars to the trunk, which will be combined with each other. It is necessary to mount not at the very top, but slightly lower. The drill drill holes that are poured with selence, and then screws are screwed up. It will help the product to hold heavy things.

Having finished the creation of hangers, you need to do its design. First, the entire design needs to be processed using sandpaper. Then should be treated with a paintwork. You can paint the surface with different colors or draw patterns to get the original product.

Original solutions

You can select the following interesting options:

Make a hanger into the hallway can be much easierIf the house has an old (sufficiently heavy) lamp. It needs to be released from unnecessary elements (wires), clean and paint. Speecually watching metallic color paint. Iron hooks insert in advance drilled holes. You can use hooks bent from durable wire.

Will look very unusual hanger made of real wood. To do this, it will need to thoroughly dry, remove the bark from it, you should also sand. In this case, you will not have to make a stand, since the roots of the tree will reliably hold the design. But it is necessary to write and lead the roots in the proper form so that they do not interfere and look beautiful. You can use the tree branches as hooks, in advance shortering the most durable to the desired size. Such a hanger will decorate the house, and it will simply be impossible not to notice. However, to find a suitable tree - the task is not simple, which makes it very difficult to implement this idea into reality.

Save space, but at the same time save functionality Wall hanger will help. For her creation, the bars will need, two framework boards, one board for creating shelves, metal corners, rails and hooks. To speed up the process, it is better to use processed materials. To build a design, you need to mark the place of attachment on the wall and mount two boards to it, located vertically to the floor. The length of the fasteners depends on the length of the product. It should approach the length of the shelves.

At a short distance to the vertical boards, rails are attached. From the bars below you need to build a shelf for shoes. The height of the shelf must be sufficient to sit on it. All joints are fixed with corners to increase the reliability of the design. Make a product beautiful and neat will help the plating with rails. Installation of the upper shelf begins with places of fasteners. With the help of drill, holes are made, in which the screws will be screwed.

For beauty, you can use forged corners and hooks, and the finished product can be treated with a veil or paintwork.

You can combine hanger with a small lockerBy making deep shelves and hooks. To do this, prepare a few durable top quality boards that have previously passed processing. You can use boards from the old bed or sofa, because the wood remains durable not one ten years. It is well processed. After work it is worth making a drawing on which the size and number of shelves will be displayed. Following the drawing, you need to cut the boards, then you should attach them to the bottom shelf. The backs of the side boards are fastened to the back of the side boards, the height of which depends on the number of shelves.

It must be remembered that on the hanger there will be not only outerwear, but also various accessories, so it needs to be especially good to attach to the wall. You can use iron corners and screws, and you can screw them into a dowel.

You can decorate the finished design with a small mirrorwhich will be located on the side. If it is beamless, then you need to attach it on a solid plywood shield. It must be fixed. The mirror itself is glued to special glue, and under it is closely installed the shelf, which will serve as an additional support. If such a design does not seem safe, you can build a frame for a mirror. It is necessary to do it from a textured board, having finished it in advance by its sandpaper and covering the verse.

A little fantasy - and the simplest hanger will become an interior decoration. It can not only be painted in one color, but also to salary with cloth or wallpaper. Good for this case will suit the Decoupage technique, which will give the product an extraordinary look.

You can decorate the corridor with a non-standard product, which (in addition to storing things) will be performed by other functions. Stool-shaped hanger will be designed to store outerwear and seats. Under the seat there will be a shoe shelf, and on a high back there will be hooks for clothes and shelf for caps and gloves.

Become a highlight of the hallway, a durable branch found in the forest or in the park. It is worth covering it with varnish and screw the hooks, and it will become a worthy element of the apartment.

Very unusually look hangers made of water pipes. In this case, you can hang clothes on valves or cranes.
Very economically and originally used wooden hangers, which can be mounted in the wall at different levels. Already in the products themselves, you can make holes for hooks or use stores that have a self-adhesive surface.
Old skiing is another interesting idea of \u200b\u200bthe design of the corridor. Hook them in a fresh hone and attaching hooks on them, you can organize a storage system in a few minutes.