Removing lime blots. What to wash the floor after repair from the blotch? Dry cleaning technique

Earlier, one of the easiest and most popular ways to make the ceiling light was white with its usual lime or chalk. However, this technology is now outdated, and a large number of other methods of finishing this part of the apartment appeared. And now before issuing a ceiling with the use of something more modern and attractive, people have to get rid of the coverage of the last century. And there is no patience for a long time with this old material. So how to remove the whims from the ceiling quickly and do it yourself? Everything is quite simple - ways to implement a lot and, after reading this material, it will only have to choose the most suitable method for you.

Why take a blink?

Why do you remove the old one, the spontaneous eyelid beat? Even if you decide to take advantage of this material again to update the appearance of the ceiling, from the previous chalk to get rid of still. The fact is that this coating turns yellow and covered with stains, and if you put a new fresh layer on it, then most likely, the old dirt will be shifted and through it. This will spoil the appearance of the ceiling and spoil all your many hours, because everything will have to redo again.

In addition, fat stains or traces of rust, which often appear on a whirlpool in the field of drainage pipes and risers, in no way turn out to be disguised with fresh whitewash, since it is one of the most capricious species of spots.

Old bliss is definitely removed if wallpapers or ceiling tiles will be glued on the ceiling, as well as if its surface is painted. The old chalome or lime cover is very rough, and neither the glue, nor the paint will hold on it for a long time due to poor clutch. It is also a great risk that the whirlwinds itself will be flawed, and with it - and new material. If you do not want to constantly glue the tumping paper or the outgoing tile angles (even seamless), then from the blots will have to get rid of.

Also, the whitewashes are easily covered with mold, especially in rooms with high humidity (bathroom, bathroom). The fungus, gradually growing over the entire surface, is with difficulty, and here you need to remove all the coating "under the root", and also to process the purified surface in addition to special means.

You will not need to take pictures only if you decide to make stretch or suspended ceilings. The presence of it under them will not affect the aesthetics of the new design.

However, many specialists advise in premises with high humidity even before fastening the suspended ceilings to remove the old blots to avoid her molding in the future.

What do you need?

Delete the old blame is not easy - to this immediately should be ready. And so there will be a considerable amount of tools for this.

Table. We needed to remove whitewash materials and tools.

Thing	Purpose
Dense polyethylene film	The observer material is needed to save from the sera and the interior endless dust, if they have nowhere to remove.
Ladder	To get to the ceiling, a stepladder is necessary. It is not necessary to build structures from chairs and tables and climb on the very top of them - the risk of falling and get injured.
Spray	A bottle with a sprayer is necessary for convenient and fast surface moisturizing. By the way, it is best to use hot water.
Putty knife	Without this tool, it is not always possible to remove the lime blotch. It is best to take a wide spatula to cover the large area. However, the little should also be at hand to use it in hard-to-reach areas.
Brush or roller	Items needed to wet the surface when removing the chalk blotch.
Sponges and rags	We need to wash off whitewings and its wetting.
Respirator or mask	During the removal of parsing from the ceiling, a lot of fine dust flies, which is not just unpleasant to inhale - it can cause the development of allergies or diseases of the respiratory organ system. To protect your lungs, you should use the respirator.
Glasses	The same small dust easily enters the eyes, settles on the mucous membranes and annoys them, can cause conjunctivitis or just unpleasant feelings in the eyes. Construction glasses with special protection, tightly sitting on the nose, will easily cope with the task of protecting the organs of vision.
Headdress	Also an important subject during the removal of bliss. Cap, handkerchief, cap will protect hair from dust and garbage, which will significantly facilitate the process of bringing themselves in order after the end of the work.
Workwear, Rob	Best of all, when removing whitewash, put on old things that do not mind throw away. Drain during the workflow bursts and settles a lot on it.
Gloves	To protect your hands from dermatitis, rubber gloves are needed. It is best to take made of dense rubber - they are strong enough and will not be rushed at the very beginning of work.

Of course, many of the listed items can be neglected, but it will only complicate your work. Only the shelter of the furniture film will save at least 5-6 hours of free time, which otherwise will have to spend on it (furniture) laundering from fine white and squeezed dust.

To remove whitewashing from the ceiling and at the same time do not harm the subjects of the interior or life, it is desirable to prepare the room before starting work.

Step 1. Free as much space as possible.

Step 2. Remove all the furniture from the room, which you can remove, carry small things.

Step 3. If the interior items are impossible, then cover them with the film. It is especially important for the upholstered furniture, as the upholstery will then be quite difficult to clean (sometimes it is generally impossible).

Step 4. Prepare all the necessary materials by placing them in the room where work will be performed. It is necessary that then do not run in dirty clothes all over the apartment, spreading garbage.

Step 5. The floors should also be covered with anything to protect the coating from small garbage and dust. Note that the floors are not so simple to rub the floors from the pieces. Close by film or newspapers.

Step 6. Place the wet rag at the outlet of the room - it is necessary in order to leave the room if necessary, it was possible to wipe the legs.

These are the main points of preparation. However, depending on the selected way of removing the blots, they can be supplemented or change slightly.

Remove the whitewash in the traditional way

After all the preparatory work, you can proceed directly to the removal of bliss.

Step 1. First, it should be carefully moistened as a larger area of \u200b\u200bthe ceiling. Wetting water is performed using a pulverizer, sponge, brushes or roller - you can use any of these items. However, it is worth remembering that moisturizing should be careful, but not excessive.

Step 2. After a few minutes, the wetting procedure is repeated.

Step 3. The next stage depends on the thickness of the plating layer and the type of coating (the latter can be chalome and lime). If the chalk applied not too much, then you can simply flush with a sponge, which is periodically rinsed in a bucket with water, and then simply wash the coating from the ceiling.

Step 4.If the chalk is applied too thick layer or limety whitewash was used, then you will have to use the spatula. With it, the spacious coating is scraped from concrete.

At this stage it is convenient to determine how well you moisturized the coating. If the water from the spatula flows, then it is too much, and you have to wait for it a little bit. If dust appears during the work, the chalk was insufficient enough.

Step 5. Ideally, the work goes in the same ceiling area, its other part should be soaked in moisture. Before carrying out the work on the scraper of the chalk, moisturize another piece of coverage.

Step 6. When all the whirlwinds are removed from the surface, the ceiling is thoroughly washed with a wet sponge.

Check that the ceiling is completely cleaned, hands will help. Spend them on the dried concrete - if there will be white traces in the hands, then it will have to wash it again.

The craftsmen advise: it is best to wash off the whitewash is not simple water, but salted. The solution is easy to prepare - 1 kg of ordinary salts are stirred in a bucket of boiling water and then cool the water to a temperature of about 40 degrees. The composition is ready for use.

It is also worth remembering that when wetting the ceiling and washing it, water should be changed as often as possible - the cleaner will be fluid, the better the work will be.

other methods

There are others, there may be less well-known, ways to remove whiten from the ceiling. But little fame does not make them less effective. To take advantage of them, you will most likely buy additional materials, but there are also its advantages.

Dry fashion. It does not have to wet anything. To implement the method, the grinding machine will need. True, this method is suitable only for those rooms where all the furniture is removed. Works should be done by a person who put on a respirator, a headdress, building glasses. A special paper with a large abrasive is fixed on the machine, and then pass along the entire surface of the ceiling. And only after all this procedure, the room is carefully laundered from white.

With the help of hammer. In order to remove whitewash this way, you will need a small hammer. With it, you need to thoroughly catch up the entire surface of the ceiling. The ideal option for the case when the whirlwinds are applied with a thick layer. After the entire white surface is awesome, the coating will be very easy to rest. In some sections, of course, the spatula is also needed, but in general the old material is quite easily falling off on its own.

"Printe" old whitewash. Very unusual and probably, therefore, not such a popular way. To implement it, you will need old newspapers (many old newspapers) and cheap glue. With it, paper sheets are glued to whitewash, leaving one edge of the newspaper freely hanging. Then it is necessary to wait to dry the glue, after which the paper simply breaks down. As a result, the ceiling is fresh and clean without using water, and the amount of dirt in the room after such a procedure is minimal. After completion of work, the ceiling is washed from glue residues and continue to repair.

By the way, for washing the ceiling is very convenient to use the mop. Then, to remove dirt remnants, you will not need to climb on the stepladers.

Special tool. Technologies have come to the point that there are now in stores for sale various means of which are aimed at rapid and convenient removal of bliss. It is enough to spray one of these means on the bleached ceiling and wait a while in accordance with the instructions, after which you can start cleaning the ceiling. Plus special washes in the fact that there are special glue in their composition, which turns the whitewash in a tight crust. It is believed to the spatula, but the coating is not dust. But the room wash it all.

Homework. This wash can be cooked with your own hands. To do this, in 5 liters of warm water, 100 ml of foam for baths and 1 tbsp is divorced. l. vinegar. The resulting solution thoroughly wet the ceiling and, having won around 5 minutes, proceed to the removal of the blots. Works are carried out using a spatula.

Paste. One of the traditional decisions when removing the blots is to use the Clauster cooked at home. It is prepared in the usual way of flour and water, then using a roller applies to the ceiling coating, dried slightly (not more than 10 minutes), and then begin to remove whip with a spatula. The undoubted plus of this method is the absence of fine dust.

Multiple Lifehakov

And finally, we share a couple of tips with you, which will reduce the amount of dirt in the room during repair work.

Use the tray while wetting the blots. When you are using a roller, a sponge or brush to apply water to the ceiling, then substitute a regular tray for them. White drops that will be dragged in subjects will no longer fly to the floor, but land in this container.
Connect a spatula and a small container. At the next stage, when it is time to take a scraper, there is also a chance to reduce the amount of dusted mud. To do this, a small plastic container is attached to the spatula with the help of a wire so that during scrapering the whirlwinds of her slices have been referred to him. A mini tray will simply be simply emptied to a bucket or a package with garbage.

If you do not have your removal experience, you can consult about this in any firm that is engaged in repairs and finishing works, or at your acquaintances. If the help, even by the Council, wait for nowhere, and independently you do not want to master the technologies to remove the white ceiling coating, then the easiest way to hire the brigade of workers who will quickly and efficiently hold all the required work in the room.

Video - how to remove whiten from the ceiling quickly and efficiently

Any less serious repair work in the apartment includes a mandatory renewal of the ceiling. But there, as a rule, there is both the old one that must be previously deleted.

If the paint is there, then it is necessary to delete it only in those places where it is selected, but if lime or chalk solution is applied, then everything will be somewhat more complicated. This is due to the fact that the removal of whitewashing from the ceiling is the process of the church and not fast.

Before cleaning the ceiling from whitewash, you need to understand what type of coating is applied. Make it is easy, and you will need only to spend your finger on it.

If the finger is the fighter, then the chalk coating is applied, which is quite simple to remove. But if the finger remains clean, then the options are two - either on the ceiling of paint, or the lime is applied that is not good news.

In both cases, cleaning the ceiling from the blotch will be a rather time consuming process. Regarding paint, everything can be and not so scary - if the main part of it is kept hard, then only those sites that crackled or peel will be removed.

First option

The simplest solution to the issue, how to wash off whitewashing from the ceiling, lies in the question itself - it needs to be washed away.

For this, it will take a brush with a rigid pile, rags and a bucket with warm water. Moist is simply washes away the old layer of chalk, if it is not too fat.

To carry out work on removing the chalk base, it is better and most convenient to use several tools - roller, sprayer and sponge.

A roller or spray, the whole plane is moistened to such a state to twist the chalk completely.

Thicatles, and especially - old reasons, to move away from concrete just do not want, and here it is already necessary to apply another way to get rid of chalk layers.

The case is unprecedented, but the result will still be achieved quite quickly. Washing plains from the ceiling is possible not simple water, but by special solutions that are sold in building supermarkets, and are intended for these purposes.

Second way

If the coating is confident enough for concrete slabs, and it will certainly be possible to remove it, you can try to remove it with the ceiling, it is plentiful to wet the whole seminal surface. Then, waiting a few minutes, remove the operated layer with a regular spatula.

The grinding chalk layer is perfectly removed by a narrow spatula. It must be applied when the wide is not removed quite clean.

If the chalk does not want to go back to immediately, it is necessary to repeat it with a roller or spray gun. At the same time, it is important not to overdo it with moisture. Oddly enough, but too wet chalk is also bad - it begins to unwind on the plane, without removing.

In this case, you need to wait a bit until the chalk dry at least partially. After dried, it will be well separated from the concrete.

Method number three

Solving the task of how to consider whitening from the ceiling, you can find a very simple and on the surface of the solution - to apply chemistry.

It is in order to remove whitewashing from the ceiling, a lot of special washes and compositions are invented for the discharge of old coatings.

Just visit the nearest store building materials, and puzzle this seller's question. He will definitely advise some chemical composition, flushing the whitewashing quickly and efficiently.

Such formulations are applied to the surfaces of the surface with a spray with a spray with a spray with a roller, and after some time, the result of their exposure will be noticeable - the coating just begins to swear with bubbles and move away from the concrete base.

You will only have to remove it with a wide spatula and clean the ceiling to pure concrete.

The same can be done with a painted surface. The type of composition will be a little different, but the general principle of use and exposure to paint will be about the same.

The most difficult version

If for some reason, all the "wet" options for the removal of old paint are not suitable, and the question of how to wash off whitening from the ceiling is not even considered, you can use the most obvious option in this case - apply the mechanical effect.

A spatula is a narrow, wide and metal brush, help remove the previous coating without using water and washes.

It will be very difficult to do it, and the rags will still need rags. At least in order to remove dust from the ceiling from the ceiling. And after complete removal of the chalk coating, it is necessary to rinse the slab overlap completely to remove all the remaining particles of the chalk.

The option is the longest, and laborious, but, sometimes, it may be the only possible solution to the issue, how to remove whitening from the ceiling.

Method using self-prepared solution

If special washes in the nearest stores did not find it, you can independently make the desired solution. Vcsus, bath foam, and water will be required.

In the water, you need to add a tablespoon of vinegar. Do not use undiluted acetic acid! Then three caps are added for the baths, and the entire mixture is thoroughly stirred.

This composition, you need to moisten the whitewash, and, having won five minutes, you can start shooting it with a spatula. The method is quite effective, and it can be used well.

In any version of the work, first of all, you need to walk along the surface by a conventional damp cloth. It will remove dust, pollution and help detect peeling paint areas.

Moisturize the ceiling, before laundering it from the blots, is the easiest enough, a small spray.

It should have a capacity from 0.5 to 1 liter. It should not take anything else - it will be difficult to hold in his hands.

Moisturizing should be carried out in two navigations - the first, rather intensively, but not so that it began to drip from the surface. Then - the second occurrence in order to further heat the chalk coating in moisture.

After such moisturizing, the chalk layer will easily be removed by the spatula.

If it is not amenable, more aggressive methods should be applicable - either use special chemical solutions from the store, or scrape the coating with a simple spatula and a metal brush, to the base.

The chalk is still exposed to the brush or other tool, even if it is applied to a very thick layer.

If, when pressing a tool from the ceiling begins to drip, you should wait a bit while the surface will dry out a slightly - with water clearly released. To remove the drier base from the chalk, it will be much easier than to deliver dirt when it is too wet.

Conclusion

As it turned out to be resolved, how to blur the old coating and clear the ceiling from the blame, you can rather simple and accessible methods.

You can even prepare the solution of the hard components necessary for this.

The main complexity arising is the complexity of the entire process. But, it is not anywhere, if there is a desire to get a decent result.

"Again ... Perhaps, in the most unenviable position, those who inherited the room with an old whitewash, so popular in the past century. Avoiding the removal of the chalk layer will not be able to: the whits have a unique ability not to get along with other construction materials.

No paint or wallpaper glue will not take it. Outputs are only two: set the suspension, possibly stretched ceiling or wash off the whitewash completely. Let's look at how to remove whiten from the ceiling yourself.

How not to do

On the ceiling whitewash - what do not do?

The ceilings do not apply to the number of easily accessible places in our house, so it is not so often washing, to clean or carry out some manipulations. The need for repair due to leaks from above is considered one of the most unpleasant situations not only by force of excessive costs, but due to the complexity of the processing of the ceiling.

Indeed, the spars include chalk or lime, which in a dry form are the smallest dust particles of white. They paint everything into white and poorly laundered.

To avoid mistakes, solving the task - how to remove whims from the ceiling, it is better to draw conclusions from the experience of those who have already come across this. The easiest way to take a rag, a broom, a spatula, climb on the table and vigorously start the process with a desire to get rid of the unnecessary layer. After a few minutes of fruitful labor in the room there is nothing to breathe from dust, all to the smallest slots around the house will be painted in the chalk color, and the plains on the ceiling will not become less.

Preparation before remove whiten from the ceiling

Understanding: Before starting the processing of the ceiling, you need to endure all items from the room, and the floor is not just noted by newspapers, and the film, the chalk spreads very well and is very poorly laundered. The outlet doors should be closed so that as many garbage can fall into other rooms.

And no less important advice: pick up a headdress, preferably goggles and work clothes, which will close open parts of the body, put on a respirator or a gauze bandage, so as not to breathe with dust.

How to remove whitewashing from the ceiling - three ways to solve the problem

Method 1. Mechanical

The most elementary way is how to remove whipping from the ceiling is a uniform, plot behind the site, wigging it with water and removal with a wide spatula. In this case, the amount of dust will be significantly less, although the dirt still can not be avoided.

What will you need:

- film or polymer protective awning;

- stepladder;

- Wide spatula;

- sprinkler, roller for wetting spins or brush - maclove;

- bucket with water;

First, it is necessary to moisten the plain layer (1-2 meters radius) and wait a few minutes before its swelling.

A little waiting, wet about the same as much as the same, and while the second plot will swell, the spatula start to take off the pavement from the first site.

So step by step - one plot wet, the other is processed - the entire ceiling passes. For wipes, a roller or sprayer is used, you can simply wet sponge or brush. Finishes advise to wear on the base of the roller's wide polyethylene lid so that water does not flow on the sleeve.

Free selection of the ceiling cleaning wizard in your city

It is possible to increase the efficiency to add vinegar and bath foam to water, which soften the blots, and then consider it with a spatula.

For five to six liters of warm water, it is recommended to add 1-2 spoons of table vinegar and several foam caps. This method is the most economical and affordable. If there is a desire to simplify the unpleasant process even more, you can purchase additional materials and clean the ceiling with their help.

Method 2. Adhesive

Additionally, you will need:

- wallpaper glue;

- Old newspapers.

The store buy inexpensive glue in the calculation to have enough for the entire ceiling area. Lubricate old newspapers with glue and glued to the ceiling, leaving a free one edge for ease of removal.

As a result, the chalk or lime layer will stick to the newspaper and will take off with it. Who is interested in how to remove whims from the ceiling without garbage this option is suitable. Mud with this method is much smaller, although the costs are somewhat larger.

Method 3. Chemical

It is necessary to use a means to remove whitewash. Some manufacturers offer a special means to remove the old bliss, which makes glue.

With the help of the sprinkler wet the ceiling and give dry. After some time, the windows turn into an easily removed crust, from which it will also need to get rid of, but already with much less effort. This method, how to remove whitewashing from the ceiling will also require additional costs and long-term cleaning of the room from the residues of the glued layer of bliss.

As an option, such glue is quite really welded yourself. Dilute flour or starch in cold water and the resulting mass is poured, stirring, in boiling water (on a liter of water, you will need several tablespoons of ordinary flour or starch). The brush is applied to this Clauster on the ceiling and, waving drying, separate the crust from the ceiling.

Ensure that you can have done after drying: spend your hand over the surface.

If there is no white mark on the hand, the goal is achieved. In the opposite case, you need to repeat the operation - remove the whitewings from the ceiling again. Complete work by applying primer on the ceiling.

Dear readers, I hope that this site information will help you easily cope with such a problem - how to remove whiten from the ceiling and successfully complete the repair.

Share information with friends on social networks

Removing whitewashing from the ceiling is an inevitable procedure that will have to go through to everyone who wants to get over its head fresh and beautiful coating, and wants to see him in good condition for more than one year. The need for this step is explained by the fact that the whits are the finish layer, which does not very much facilitates the subsequent coatings on it, especially if it is another type of finish. For example, if the ceiling was painted with chalk, and you want to cover its water-level paint - you need to get rid of the ground to the ground.

The only case when with the old ceiling coating can not do anything - if you plan to install suspended ceilings of any kind - tension, MDF or plastic panels, drywall and others. Although it happens that the ceiling is so burned or covered with a fungus that leave it in such a state, even sticking with a suspended design, not entirely correct.

Almost every repair and construction task has several solutions, and to the question: "How to quickly remove whitewash from the ceiling?" There is also no one answer. In the process of repairing repair for dismantling work, there is not so much time and finance, therefore we will consider the optimal methods.

In addition to the speed of removal of the old coating, you should not forget about the safety of the fact that it will not be possible to change or repair, otherwise you will have to spend time and finance for damage to damage. We are talking about doors, windows, walls and flooring, and also, possibly furniture. All this must be carefully closed with a construction film, the floors - cardboard.

It is also important to take care of yourself - protective glasses, the respirator and gloves must be a tool number one, without which it is better not to start. Your health is worth it, believe me.

If the conversation about the ceiling, it means about height. Accordingly, stable stepladder or building goats should also be available.

The speed of the operation largely depends on the presence of the desired tool and the correct choice of its execution method!

To do this, determine:

White type - chalk or lime
Layer thickness

The chalk leaves the trail on the finger and is easily blurred by water.

Lime is more resistant to water, and leaves no traces. The layer thickness is easily determined by a wet sponge: you need to lose its ceiling and reach the base.

The thin chalk layer is easily flushed, and tools for this need a minimum. In this case, the flushing from the ceiling can be carried out by a conventional rubber brake for washing glass.

Glass wash scraper

The surface of the ceiling is thoroughly moistened with a sprayer (it is better to take a garden, but if it is not, then an old bottle from the wiper). Wait a couple of minutes and then breathe the ceiling alternately, using a foam sponge and a rubber scraper.

When the whims were applied repeatedly, the rubber blade is no longer suitable, it is necessary to put a rigid construction spatula 10-12 cm wide.

Construction spatula

Before this, the ceiling also needs to be moistened, but only not as abundant, as in the case of a wiper scraper. Here the hockey problem is that the entire layer of blissing, at all its depth, became soft and loose.

For more quickly eating the coating, it should be captured by the entire width edge of the blade, but about 2/3 or a little more. This can be done in the case when the entire width of the spatula Belil is not very good.

Instead of a spatula, you can use a building scraper with a telescopic handle. It will also allow the master to be outside the zone of falling garbage.

Building scraper with telescopic handle

At hand it is desirable to have a plastic tray so that the removed coating falls into it - there will be less problems with subsequent cleaning.

To ensure better moisturizing and dropping the blots from the overlap panel, it is necessary that the moisturize fluid penetrates the structure of the finishing layer. For this, water is heated to a temperature of about 40 degrees, and a small amount of overwhelmed economic soap is added to it (2 tablespoons per 10 liters) and soda calcined (5 tablespoons per 10 liters).

Another recipe is a couple of spoons for washing dishes or foam for baths, plus 2-4 tablespoons of vinegar. The acid medium enters the reaction with whitewash, as a result of which the layer "undermines" and remove it becomes an easy task.

One of the tools that allow it very quickly to remove whitewashing from the ceiling is a grinding machine. This method takes the least amount of time, but will be the most dusty (except for the use of expensive professional equipment providing for the connection of an industrial vacuum cleaner to the grinders).

Grinder machine

When the task is to achieve the minimum amount of garbage, it is possible to use old newspapers and inexpensive wallpaper glue to rapidly removing the pavement from the ceiling.

The paper is pasted on the ceiling, while the glue impresses the spray layer, and after drying it is moving along with her whites. To make it more convenient to shoot the newspaper, one corner is left non-close. The remnants of the coating are removed by the spatula.

An old good way to remove whitewash is the use of a coolness cooked from flour or starch. The composition is applied to the ceiling, the time will be waited for it to dry, and then the resulting crust (bleaks impregnated with a hubber) is removed with a scraper (spatula). The garbage is quite a lot, but dust is completely absent.

If there is no desire or opportunity (there may be no electric or gas stove in the apartment during repairs) to engage in cooking tip, instead you can take inexpensive wallpaper glue. The rest of the procedure remains the same.

To remove the old whipping with a spatula on dry is not recommended - it will be longer in time, and dust will be significantly more.

After the final removal of the previous finish, the ceiling must be rinsed thoroughly and primed before applying subsequent materials.

Light ceiling to you above your head!

Any repairs related to the ceilings in the apartment are accompanied by the preparation of the ceiling surfaces. At the same time you need to worry about how to clear the ceiling from the blotch.

Naturally, if there are wallpaper on the ceiling - they should simply be removed (in the same way and with tiles of foam). As for the reference mentioned above, it must be washed in such a way as not to damage the surface of the ceiling itself.

Removal receptions

Currently, the two most well-known methods of removing the ceiling bliss are widely practiced, one of which consists in the "coverage" of the surface with a sponge, moistened in clean and warm water. The second method is used in the presence of a very thick layer of blissing and implies cleaning the ceiling with a spatula.

Note! Removal of raids without wetting leads to the formation of a large amount of dust, which will require careful shelter of walls and furniture by any protective film.

For coherent work, you may need the following tools:

The pulverizer used to wet the surface.
Spatula (may be required to remove old putty and paint).
Any water tank.
A set of sponges for flushing bliss.
Stewbridge or old desktop.

Hot water is best suited for washing operations, which will allow you to reduce the flow of working time to remove whitewash. After wetting a small area and immediately before removing the whitening from the ceiling, it should be giving it as it should be "baked".

During the wait, you can start processing the neighboring zone. After that, using a sponge, it will be possible to start consecutive rubbing of the operated composition with smooth circular motions (up to its complete removal from the ceiling). Meeting hard irregularities should be removed with a spatula.

Thus, flushing the consistently adjacent sections of the ceiling, you can remove raids on the specified deadlines from all its surface. Upon completion of work, the ceiling will need to be frozen. To do this, you will need a clean piece of the sponge, with which you can remove the remnants of the chalk or bleel.

Cleaning the ceiling using old newspapers

Another way to clean the ceiling and walls from the blotch involves the use of old newspapers and is considered the most pure. All that will be required to implement this method of cleaning is usually already available in the household:

the most common and inexpensive glue for wallpaper;
soft tassel for applying adhesive composition;
old newspapers.

The essence of this method is that newspapers are pasted on the ceiling, which, after drying the glue, are moving away from it along with whitewash. Experts advise to leave corners of extreme newspapers not fully glued, which will make it easier for their breaking after graze.

Currently, special solutions used to wash the chalk are becoming increasingly popular.

They are sold in separate specialized stores and are applied like ordinary warm water, that is, they are applied to the surface of the ceiling using a pulverizer. The composition contains the adhesive component, which makes it easy to consider the resulting mass by a conventional spatula. After treatment with a solution, the ceiling will need to be frozen again with warm water, while removing everything that remains from the previous operation.

Note! In the event that the whots consists of several layers - it is necessary to remove it with small parts or layers. In this case, each subsequent layer should be removed very carefully to avoid damage to the ceiling itself.

Most of all, hassle delivers paint, located under the layer of bliss. For its removal, the surface of the ceiling is recommended for sections to heat the construction hairdryer, after which the paint usually begins to be flawed.

In conclusion, we note that in the case when the ceiling whitewashing in your apartment is in a satisfactory condition - it is not necessary to wash it off at all, it is enough to eliminate all the existing flaws, that is, to make ordinary cosmetic repairs.

In order not to look for a way, how to wash the blots, staining the floor and walls, while repairing all surfaces should be covered with newspapers or polyethylene. If you don't do that, you have to fight for a long time with resistant white blots, which have a property manifest itself again as soon as the washed floor dries.

Eliminate fresh blots blots

Before cleaning the floor after repair, collect all the garbage and sweep the room. In order not to step dust, put on the respirator, the hands are securing rubber gloves. The better you will remove the construction dust, the easier it will wash off the pace from the floor.

To eliminate stains, a lot of water is necessary. It is necessary to constantly change the dirty liquid to clean and thoroughly rinse the rag. If it is covered with a white bloom, take clean rags and continue to work. Instead of a rag, you can use a foam or sponge, it is easier to wash them.

How to wash the floor after whitewash? Use the verified instruction.

First, wash the surface with water.
By eliminating the main dirt, dial the bucket of clean water, pour there 20 ml of vegetable oil on each liter of fluid.
Moisten a rag and wipe the floor.
Wait until it dies lightly.
Replace the water in the bucket once again and dissolve a couple of vinegar spoons in it. Wash the floors.
After some time, wash them with re-clean hot water.

After such manipulations from the spots of fresh blots, there will be no trace, although this method will make you work hard.

Clean ceramic tiles and floor

If blots blotches were on ceramic or painted surfaces, mangalls will come to the rescue. Thanks to its chemical properties, mangartageous potassium enters into a reaction with whitewash, and lime traces are laundered without effort.

Prepare a weary solution of manganese, wash them the floors and tiles several times, not forgetting to change the water and rinse the rag.

This method is suitable for painted walls, plinths, dark color linoleum and ceramics. For window frames, parquet and other lacquered surfaces, manganese is better not to use so as not to provoke the appearance of pink divorces.

How to wash wooden floors

The tree needs careful care. When eliminating the stains, the hostess are thinking not only how to wash the floor from the blots, but also how to keep it shine and beauty.

Use a secure recipe. Type in a bucket of warm water.
Pour the table vinegar in the calculation of 1 tbsp. l. per liter of fluid.
Wash the floors with mortar twice.
When the parquet dries finally, make sure that it does not have divorces left, and soda its surface with glycerol water. On 250 g of water 1 tbsp. L Glycerin.

Instead of vinegar to purify parquet from Poching, you can use ammonia alcohol in a ratio of 1 spoon per 1 liter of water.

If the whitewashed on the floor managed to dry, the task is complicated. To wash the floor, wet a big piece of the veil, unscrew it and put it on parquet. When the lime is splashing, remove the rag and carefully remove the spatula whip. You will then wash the wooden surface with vinegar or ammonia.

The unpainted wooden floor quickly absorbs lime, so the traces of it are especially difficult to eliminate. Try to wash the surface immediately after whitewash. To do this, prepare a special solution:

in a bucket of warm water, pour two large spoons of the household soap;
add a spoonful of turpidar;
mix thoroughly.

Abundantly cover the floor with liquid. Take a brush with a hard pile and, as you should, clean the tracks from the blotch. Leave the solution to exposure for 10 minutes and thoroughly wash it with clean water. At the end, cover the tree with a thin layer of oil from flax.

My linoleum

Linoleum is well cleansing, so you will easily pick up than to wash the floor after repair.

Fresh whitewashes are quickly removed by hot soap fluid. Thoroughly wash the coverage, change the rag and slide the floor with clean water.
If traces from lime still can be seen, use the turbidar. Dissolve the product spoon in 5 liters of water and clean the contamination.

To return the original gloss to the linoleum, go through it woolen wet rifle, wipe dry, moisten a rag in milk and wash the floor. Instead of milk, you can apply linseed oil. Gently apply it on clean linoleum and soda with a dry cloth.

Household chemicals

Many people for cleansing surfaces after repair preferred household chemicals. For sale many drugs, perfectly cope with the most complex pollution.

Fresh lime is easy to remove the liquid "Mr. Spepper".
The universal detergent is specifically designed for floors and walls.
It can be used for ceramic tiles, laminate, linoleum and parquet.
Divide 2 -3 Water Bucket, Fill and wash the floor. If necessary, repeat the procedure.

Perfectly launders whitewash the remedy for the "Fairy", "LOSK" from Amway and "Whiteness". Choose a suitable tool, add a few spoons in a bucket with water and wash the floors 2-3 times, changing the solution and rag.

Alpine pollution

Many ask how to wash the floor from the blink, if she finally dried? You will need kerosene.

Stir 150 g of substance in 5 liters of water. In order not to spoil the coating, test the solution on the invisible area before use. If there are no negative changes, start working on cleansing.

Wash the floors with liquid several times.
The frozen whitewash carefully wipe with a sponge implied in pure kerosene.
Clean the treated area with water.
Finally, wipe the floors with a weak solution of vinegar. It will help neutralize the smell of kerosene.

Well copes with complex pollution ordinary salt. Connect 0.5 kg of salts with 5 liters of hot water. Stir and wash the floor and walls from whitewash.

Often after the end of the capital or cosmetic repair, all surfaces of the room remain covered with spots whitening or layer of lime dust, even if protective polyethylene covers and newspapers were used. It only seems to wash off whitewashing easily.

Despite the fact that the composition is represented by the smallest dusting, which should be laundered without any problems, in practice, laundering white formations and divorces are quite problematic. Nevertheless, there are several proven practices of methods, with the help of which you can restore the cleanliness of the floor, walls and other surfaces.

Means with which you can eliminate traces of whitewashing from different surfaces

To laundel traces from whitewashing and prevent the appearance of turbid divorces on various surfaces, after the end of the repair you can carry out the following manipulations:

The use of vegetable oil. In the bucket or pelvis mix warm water and vegetable oil (on 1 liter of the product half a package). The resulting composition is wiped with the floor, the surface of the walls can be processed. Then change water and this time in the same proportions mix cool water and vinegar. We rinse the surface by this tool, after which we wipe them with clean water and leave to dry with good access to fresh air.

Using a salt salt. To wash off the whitewash, which is not simply dust or stains, and a dense layer, you must first thoroughly wash the surface of the walls and the floor with a composition prepared from warm water and detergent for dishes (no more tablespoon on water pelvis). After that, wipe them with a solution of table salt (half of the glass of fine powder on the bucket of the liquid). If the traces of repair fails, it was not completely possible, then we add half a glass of 3% vinegar to the finished salt composition and repeat the manipulation. As the completion of the procedure, the floor and the surface of the walls should be wiped with clean water and dry.

Also able to quickly eliminate persistent contaminants, however, for the processing of the lacquered surface, this tool is better not to apply, divorces may remain. We divor into potassium permanganate slightly warm water to obtain a solution of bright pink, which wipe the surface victims during the repair process. Wash nothing!

Kerosene against persistent spots. In a bucket with water, we pour several tablespoons of kerosene (with strong contaminants, the volume of the active component can be brought to half a glass), we also stir both problem areas. Use after this clean water must.

Tip: If, as a result of the use of any strongly smelling agent (for example, kerosene or gasoline), a persistent unpleasant smell is preserved in the room, then the treated surfaces of the floor and walls should be wiped with a very weak solution of vinegar. Then let them just dry, opening the windows.

Universal cleaning products. A good result is given to such prepared foods like a domain. Two tablespoons on 5 liters of water and we use it in proportion and use for wiping polluted areas. Clean surface is already cleaned with clean water several times.

Detergents for sex. In cases where the contamination remaining from the repair is insignificant, they can be attempting to wash themselves with the simplest means for treating floors (Mr. Muskul or Mr. Proper). An additional plus of this approach is the atmosphere of freshness and a pleasant smell as a result of cleaning.

In addition to the listed, there are also profile agents that are designed specifically to remove traces of whitening from walls and gender. The main thing is to apply them strictly according to the instructions without violating the recommended dosages and adhering to the sequence of actions.

How to wash the old blotch before starting work?

Usually, at the very beginning of the repair, there is a need to remove the old layer of whitewashing from the ceiling or walls. To carry out such a procedure, it is not necessary to call the masters, you can try to cope with your own forces. The whole process consists of several stages:

Before removing the blotch, it is necessary to free the room from furniture or at least cover it with protective polyethylene covers. In this case, then you do not have to think how to wash items and surfaces from dirt.
There are a lot of ways to remove an unnecessary layer. The most common is an option using a sprayer. With the help of a special or improvised pulverizer, it is necessary to distribute water on the ceiling so that it does not drip, and penetrated the texture of the material, making it loose. We are waiting for 10 minutes and repeat the manipulation. Next, we take the spatula and carefully remove the layer of lime from the ceiling. We work quickly, while the raw materials do not dry again.
There is another effective option to remove whitewashing from the ceiling. For its implementation, we need a newspaper that you need to lubricate the low layer of inexpensive glue, and stick to the ceiling, leaving the tips of the sheet. As soon as the design sucks to the ceiling, carefully remove it along with whitewash. Thus, we process the entire ceiling, preparing it to repair.

After the cleaning performed, it is necessary to wash the ceiling from the remnants of the chalk with a tight sponge. After the surface is driving, you can proceed to its further processing.

From the very beginning of the repair work, the inevitability of the dismantling of old coatings appears. Today we will talk regarding how to clean the ceiling from the old whitewash. At the moment, the range of materials for repair is so diverse that the most exquisite preferences quit.

On what kind of covering for the ceiling you did not stop, before applying it is necessary to clean the ceiling from the blame, since without this, the new ceiling will not last long. The need for cleaning may occur in connection with the replacement of the coating, as well as to update the painting with a similar method or deliverance from fungus and sublishes. In each case, you will need to get rid of the old coating.

Multiple receptions are popular how to clean the surface from the blots:

Anhydrous method;
Use of water;
With the help of a hammer;
With the use of alee;
Using soap composition;
With the help of newspapers;
With the help of a washing vacuum cleaner.

Anhydrous way

This method makes it possible to clean the ceiling without soaking, that is, "dry". You only need a spatula, since it is them you will consider chalk. This method is better to use as auxiliary, as a large amount of garbage is formed. Undoubtedly, subsequently performing the work you will find dust even in the most distant corners of the dwelling, and not only in the room where work was performed. For this reason, it is better to refrain from this type of work.

The fastest "dry" method of removing the chalk is applying a grinding machine. If this device does not have this device, and the acquisition of this car for some reason does not include your plans, it is possible to purchase it for a while for rent.

This method is practiced only in empty rooms released from furniture, and windows, gender and doors, must be covered with cellophane oilcloth. You should also free the rooms from furniture in all apartment, since dust accumulates very plentiful. Head Protect your head with a scarf or cap, put the respirator on the nose, especially in order for dust particles to do not go to the airway.

A leaf of large abrasiveness should be recorded on the machine, which is commercially available in the construction market, and handle the surface area, spinning space. Subsequently, it remains to you only thoroughly wash the room where work was carried out. After wet cleaning, you can confidently do the following works.

Use of water

In this case, we use a sponge of foam rubber or roller, well moocked in water. Water is quite quickly absorbed in the chalk, so the plane should be processed several times in a row. The chalk will risks, and then with the help of a spatula you will remove it without effort. The process is painstaking and takes a lot of time. After cleansing the ceiling, passing the grinding paper, then apply primer.

With the help of hammer

This method is used only with a thick coating. In order for the chalk layers to remove from the ceiling, take a small hammer, consistently catching up on the surface. With proper execution (do not miss large areas), the whits will easily fly away itself, only you need to simply come up with the edge.

With the use of Claysther

The most successful type of cleaning of the top of the lime is the use of alee. To the surface it is necessary to apply the prepared solution and give it to dry. After some time, the chalk easily will be able to dug with a spatula.

Clasting cooking will not require ambitious works, it is prepared in the same way as for pasting walls with wallpaper. For one liter of fluid, you need a couple of starch or flour spoons. When using flour, first it should be dissolved in the liquid and place to a homogeneous state, further pour the resulting mass into boiling water.
The provided cleansing scheme is most effective from all listed. Applying this method, you can clear the ceiling from the blotch quickly. What is important in this case the result will be much more careful and cleaner, and cleaning is subsequently less.

But still on the courtyard of the 21st century, and most people do not even know how the Claister is preparing and what it is. These skills may not be needed, due to the fact that today there are specialized glue-based solutions in construction stores to remove chalk.

With the help of them, you can clean the ceiling from the old whitewash with a spray or brush. After a while, the solution will dry and it is necessary to scrape along with chalk.

Using a soap solution

The most popular way to clean the ceiling from the old chalk is application of the composition of calcined soda and soap. For its manufacture, you need to take 10 liters. Warm water, 2 spoons of the rubbed soap for instant dissolution and 5 tablespoons of soda. In the resulting composition, it is necessary to wet the sponge of the foam rubber or a special roller and rinse the surface to complete cleansing.

If this method did not give the perfect result when cleaning the surface, it is necessary coat its liquid salt or 3% acetic acid. Due to similar manipulations, the whirlpool will swell, after which you will remove the remnants without difficulty.

With the help of newspapers

Such a manipulation is certainly a guarantee of perfectly clean ceiling, but you can save a large amount of time and strength, and cleaning will later be much smaller. It is necessary to glue with old wallpaper or newspapers the ceiling using alee. It is necessary to glue it so that the ends hung freely. Once the glue will dry, it is necessary to jerk behind the edges and tear off the paper. The remaining pieces of chalk must be removed by the receivers listed earlier. How to Clean the ceiling from whitewash quickly video.

With the help of washing vacuum cleaner

Separate wizards are committed to using the washing vacuum cleaner to eliminate chalk. The main condition is only one layer of bliss! Such manipulation undoubtedly stands out by a much smaller amount of dust and contamination.

Keep in mind that the technique may break out after such actions and use it, it is likely that you will no longer be. This method causes strong doubts if you still ventured such a crazy step, purchase for this manipulation available for the price or old tool.

Whatever the way to clean you is not chosen, you need to remove all furniture from the room. Polyethylene oilcloth is not allowed to guarantee protection against dirt and dust.

The guarantee of good luck in this process will equally be the organization of work. In order not to waste time and strength, it is necessary to create conditions for the system work process: at the time of removal of the chalk in one part of the room, the rest of the surface should be soaked with water.

It is required to keep quality labor control. After drying the ceiling, it is necessary to explore how thoroughly the former whitewashes are flushed.

If subsequently cleaning the old pavement on the ceiling is preserved attached zones, it will be necessary to test the reliability of plaster. It is necessary to obstruct all attachment places. In case of unsatisfactory density of plaster, it should be eliminated from the surface.

After completing all the work on the removal of the chalk, the surface should be washed with a hot sponge of foam rubber moistened in hot water.