Frame house Bavaria. Bavaria - a project of the house of glued bar Optimal furniture alignment

Basic equipment

Foundation:without foundation
Floor floors: Floor lags 40x150mm, draft floors - OSP 3 - 6 mm, insulation - 50mm in wind hydrogen insulation, flooring floor - floor board 21mm via vaporizolation.
External walls of the 1st floor:frame - 40x150mm, insulation - 150mm, sheathing lining 12.5mm, outside by wind-hydrogen, inside vapor barrier.
Partitions of the first floor and attic:40x100mm frame, not insulated, lining lining 12.5mm, on both sides of vapor barrier.
Overlapping 1 floor:overlapping beams - 40x150mm, ceiling liner - 12.5mm lining, floor flooring - floor board 21mm vapor insulation, insulation - 50mm.
Attic:the frame - 40x100mm, not insulated, the lining clap is 12.5mm, outside the wind-hydrogen, inside vapor insulation.
Slinge system, roofing: The rafter - 40x100mm, the cover of the attitude of the attic - the lining of 12.5mm via vapor barrier, is not insulated. The roof is galvanized profiled steel, a 5-hydrohydrohydro-hydro insulation.
Window:wooden, with double-row glazed and single-circuit seal.
Films:installation of waterproof windows and around the perimeter of the foundation
Doors: Entrance, internal - wooden panels.
Stairs:
Porch:no foundation, floor lags - 40x150mm, flooring - p / m planed 21 mm, lateral fence - carbon black profile, ceiling liner - 12.5 mm lining, roofing - galvanized profiled steel, 5mm.

Price - 1,030,000 rubles

Complete set "Country house"

- AS A GIFT!
Floor floors:floor Lags 40x150mm, draft floors - OSP 3 - 6 mm, insulation 150mm, floor flooring - floorboard for 35mm
Walls of the 1st floor:
Overlapping of the first floor:
Attic:frame - 40x100mm, insulation - 100mm.
Finish:outdoor - Lining 12.5 mm by wind-hydrogen, internal - lining 12.5 mm via vaporizolation.
Slinge system, roofing:the raftered - 40x100mm, the roof is galvanized, profiled steel, including the porch.
Window:wooden, with double-glazed windows, cottage set (p 42).
Films:installation of galvanized waterproofs under the windows and around the perimeter of the foundation.
Doors:
Stairs: The planner is an attic - made of planed lumber, with balusters, with a horror fencing turnstile on the attic. Input - Power, temporary.
Porch:size 1250x2500 mm.
The house is intended for accommodation in the period - early spring - Late autumn.

Price - 1 133 000 rubles

Complete set "Warm house"

Foundation: screw, pile 108x2500mm (including porch), bump - AS A GIFT!
Treatment:
Floor floors:floor lamps 40x150mm, draft floors - OSP 3 - 6 mm, insulation 150mm, flooring floor - floor board for 35mm.
Walls of the 1st floor:frame - 40x150mm, insulation - 150mm.
Overlapping of the first floor:overlapping beams - 40x150mm, floor flooring - floor board 21mm vapor insulation, insulation - 50mm.
Attic:frame - 40x150mm, insulation - 150mm.
Finish:external - Lining 12.5 mm on wind-hydrogen, internal - lining 12, mm vapor insulation.
Slinge system, roofing:the rafter - 40x150mm, the roof is galvanized, profiled steel, including the porch.
Windows: Wooden, with a double-glazed window, Winter set (p 65)- AS A GIFT!
Films:installation of galvanized waterproofs under the windows and around the perimeter of the foundation in the color of the roof.
Doors:entrance and internal - wooden panels.
Stairs: The planner is an attic - made of planed lumber, with balusters, with a horror fencing turnstile on the attic. Input - Power, temporary.
Porch:size 1250x2500 mm.
The price includes: Installation of the house and 100 km of delivery from production (MO, Resurrection District, Beloozersky village).
Besta uses only a dry framework.

Price - 1 303 000 rubles

Complete set "House" turnkey "

Foundation: screw, pile 108x2500mm(including porch), bump - AS A GIFT!
Treatment:biosis of the lower strapping, the cranial bar, the lag of the floor in 2 layers, from four sides.
Floor floors:floor lamps 40x150mm, draft floors - OSP 3 - 6 mm, insulation 150mm, flooring floor - floor board for 35mm.
Walls of the 1st floor:frame - 40x150mm, insulation - 150mm .
Overlapping of the first floor:overlapping beams - 40x150mm, flooring - floor board 35mm vapor insulation, insulation - 50mm.
Attic:frame - 40x150mm, insulation - 150mm.
Finish: External - Sayga Siding on OSP-3 9mm - as a gift! By wind-hydrogen, internal - lining 12.5 mm vapor insulation.
Slinge system, roofing:raftered - 40x150mm, roof - metal tile. - AS A GIFT!
Window: wooden, with double-glazed windows, Winter set (p 65) - AS A GIFT!
Films:installation of waterproof windows and around the perimeter of the foundation in the color of the roof.
Doors:entrance and internal - wooden panels.
Stairs: The planner is an attic - made of planed lumber, with balusters, with a horror fencing turnstile on the attic. Input - Power, temporary.
Ventilation:bathroom ventilation device, with a passing element on the roof.
Porch:size 1250x2500 mm.
The house is designed for year-round accommodation.
The price includes: Installation of the house and 100 km of delivery from production (MO, Resurrection District, Beloozersky village).
Besta uses only a dry framework.

div\u003e .uk-Panel ", Row: True)" Data-UK-Grid-Margin \u003d ""\u003e

Equipment

Each project is completed individually, as the technical solutions depend on the construction site, and decoration and equipment - from the wishes of the client. As a starting point, you can consider the following characteristics:

Foundation

Optimal for most conditions foundation is a small-breed reinforced woodwork. The substrate from the rubbed sand is 300 mm, the minimum shutback of the concrete part 200 mm, from 6 axes of reinforcement 12 mm.

Options:

Stove for woodwork (monolithic w / b cooker plate)
UCHP (warmed Swedish plate)
Plate for pile (for sections with a close level of groundwater)

Wall kit

For your projects, we use glued bar with a wall thickness 202 or 242 mm.

Variants of sections

Standard: 202x190 (h) mm, 242x190 (h) mm
Salon (premium): 202x240 (H) mm, 242x240 (h) mm (with solid slats)
Salon (high): 202x270 (H) mm, 242x270 (h) mm (with chess plywood)

Roof

For wooden houses, any type of roof is suitable. The selection of the finishing material depends on the angle of inclination of the roof, presence next to the house of trees and aesthetic client preferences. As a starting point, we can consider the soft roof of American, or Finnish manufacturers with insulation of 200 mm, snowstaving and metal drainage system.

Options

Soft roof
Cement-sand tile
Fals.
Natural tile
Metal tile (should consider the noise of this coating during rain and temperature drops).

Change project

We specialize in individual design. This project, like everyone else, was developed on the basis of the wishes of a particular customer and serves as a demonstration of the possibilities of our architectural bureau. You can leave it unchanged, or choose as a starting point to create your own project, which is suitable for you.

Than our homes are different
From the rest?

Your home will be warm

We guarantee that the house built on our project will be warm. Our homes fully correspond to SNiP. Wrong erkers, balconies, unnecessary liar in the walls and some other elements can also lead to heat leakage. But the most important cause of heat loss is purging the walls due to the incorrect profile of the longitudinal groove on the log or bar or due to non-professional assembly. We follow, so that our homes are warm.
We make changes to the project for free

Most customers are asked to make their changes to the project: add or remove the boiler room, terrace, "second light", an additional bedroom, windows, enlarge or reduce the premises. We are pleased to implement the wishes of customers in the project. But we can also refuse the changes if they are not consistent with the existing ones or the rules of wooden house-building or may lead to the rise in the cost of construction. All changes in the project we introduce free.
You save on construction up to 200,000 rubles.

With our project you are guaranteed to save at home - up to 200,000 rubles when erecting a 200 meter house.
The placement of the engineering networks is already thoughtful

In our projects, the placement of engineering networks is thought out. If this is not done in advance, then you will have to use non-standard sizes, which is usually worth more. Or it will be necessary to install additional boxes in the visible place and their subsequent decoration.
Optimal placement of furniture

Our projects laid a competent furniture alignment. This eliminates errors when planning the size of the premises, the location of window and doorways. If this is not done when designing, then, for example, due to improper placement of the door or window, you do not have enough 10-30 centimeters for the location of plumbing, cabinets or kitchen boxes.
We are building at home

We not only create projects, but also build at home. Each project, submitted on our website, was repeatedly built by us. Our architects are visited by houses built and see "not on paper" the result of their creativity. We also receive feedback from the owners of houses built according to our projects, we take into account their wishes and make changes to typical projects. Thus, it is safe to say that our projects are tested by time and repeated construction, they are comfortable for living and economical
Optimal cutting 6 meter log

6 meter logs are used for the production of a log. The logs are cut to the elements. With a depreciation, a waste remains, which can reach up to 20% of the total wood. We design the house and the size of the premises in such a way that the cutting 6-meter log was optimal, and the departure sought to zero. This allows you to significantly reduce the cost of a log. Therefore, the exact dimensions of the premises are very important, and the resizing is even 20 cm can lead to large waste, and, therefore, the appreciation.