What can be done with a small motor. How to make a pump from the motor. How to make chopped or grinding device from the engine for washing machine

Make anything useful from unfastened children's toys or household appliances Master-fantasist is not a problem. And it is good that many electrical appliances are obsolete and broken. Such things to give to the repair does not make sense - it's easier to buy something new. And the true "self-timer" is only waiting for this. They immediately arise whole heap of ideasrequiring immediate incarnation.

Second life of children's toys

There are cases when the self-propelled toy is divided into smallers. Probably to calm the child, you need to urgently buy a new one? Not necessarily. You just need to start the process of ex-home creative thinking. And for this, from a broken machine to extract the remaining fittings along with the engine. Then collect all the toys in the house and stop your choice on the one that can be revived again. Probably, school knowledge of physics, chemistry and electrical engineering will be needed here.

Repair of old helicopter

The old forgotten helicopter with a disorder engine and broken blades, which has long been lying on the mezzanine, suddenly fell apart. He apparently waited for his star hour And now, with pleasure, showed white-blue sides with half a brine inscription "USSR-0098".

With such things you need to handle neatly. The old man does not like fuss. We will have to carefully remove the remnants of a large main screw, unscrewing several small screws. To penetrate the engine compartment, it is necessary to remove the plastic box for the batteries below. The engine keeps on three bolts and has, as it should be, the two wires "plus" and "minus", which are connected through the microcircuit block with the inclusion toggle. All this must be carefully disappeared and unscrewed.

Having pulled out the engine on the white light, you need to view it and compare with the engine from the machine. The fact is that it is enough to create a lifting force 250 -270 rpm. and power 1 - 2 watts. The difference in the characteristics of the engines was small. Then you can safely put the helicopter with a fresh motor. And then go to the store for model profiles for a new bearing screw. When everything is ready, the test of the renovated coil machine in the presence of the entire creative family is carried out.

According to the same scheme, modern children's models of helicopters are also revealed. Only now they are radio-controlled, and therefore will have to fork out to the control panel, on which the speed of the carrier screw and the speed of the helicopter depend.

New engine for toy machine

In order to make a baby small machine, you need: wheels, car body itself, wires, control panel, various email cards and a motor. In the presence of all this, the good proceed to the creation of the model. No need to search engine, as it is already there. The car body itself can make it with your own hands From wood or plastic and make up your taste. Good to the masters who have a small 3D printer in the house, which will build any form of model.

Often make a machine completely simple. Take a long-abandoned little children's car with wheels, disassembled to the screw and try to automate it with the help of a ready-made motor. This uses: glue, tape, small gears from hours, gearboxes from old models and much more. And people for whom such fun has become a real hobby often achieve great success in self-herring from the motor.

When several new models of children's cars are made and tested, it remains to do a generally-heard business. It is necessary to construct a fan that would refresh air and caught up new ideas. For this you need just a few itemsHands. Namely:

motor from children's toy (without him anywhere);
CD discs pieces 6-7;
plastic cork from a bottle;
a cardboard tube height is about 10 cm and a diameter of 3 - 4 cm;
switch;
glue.

The manufacture begins with cutting disc on 8 equal parts from the edge to the center, without reaching approximately 1.5 cm to the opening. Then the obtained sections must be turned into one edge to the outside to get the blades. The manufactured disk is covered with a plug, inside which make a hole for landing on the motor.

Now Mastery Masters and Stand. The cardboard tube will easily come down behind the leg. Inside it will hide the wires and batteries. The remaining multiple disks can serve as an excellent stand. All this is well glued and painted in different shades. The fan is ready to work.

Ship on the engine

In order for a child to do not hang day after a computer, it needs to be gradually accustomed to the manufacture of a variety of interesting things that he can make it up with his own hands. Spring soon, streams will run, and you will need a small boat, which will symbolize the upcoming long-awaited heat.

Necessary materials The child will find in his room. Here you need:

finger Batteries 3 pieces;
foam, tape, glue;
motor from a CD drive or toys;
plastic cover from a lemonium bottle;
two pieces of plastics and iron washers.

First of all, you need to make a rowing screw. In traffic, prepare slots for the blades. Flat sticks from ice cream and are ready-made ships of the future ship. Then the hole is done in the stopper for planting this screw to the motor. All this is pregnant. Power installation is ready.

Next, the foam cut out the shape of the ship. The front part of the boat makes the triangular, on the feed prepare a place for a rowing screw with a motor, and in the middle you need a recess for the batteries. All connect and sample. Tests in the bathroom and are looking forward to the first Spring puddles.

Machine-glisser

This fascinating toy created and tested by the child. On the ground, such a machine moves on wheels, and water on a special boat. It is manufactured in 2 - 3 hours.

Necessary materials:

Make a power plant. It is a propeller engine. The blades cut out using the neck of the bottle.

Must get rosette. The photo shows that then it is screwed onto a plug attached to the motor.

Then make the running part. To do this, use a skeleton. Tubes that serve as wheels are put on it. Fasten everything to a square bottle, inside which put the batteries. Connect with wires according to the electrical circuit. Glisser is ready. If you wish, you can replace a plastic propeller with a more rigid. Then the driving qualities of such a typewriter will appreciate not only the designer himself, but his friends.

Crawling robot

The manufacture of a robot takes only a few hours. This is not a completely robot that people imagine. It does not walk, does not swim, but chaotic crawls over a smooth surface. This effect is created due to the unbalance of rotation of the motor rotor. For real cars, this leads to a tragic accident, and here it causes only a smile.

So, to create a robot, you need a motor and battery. On the axis of the engine wear a small oblong a piece of foam or foamy and glued. This serves as a destabilizer. On the tip of his fasten the decorative light item.

On top of the motor installed the battery and glue with different interesting details. Make him legs from the toothbrush, eyes from the balls, decorated with colored wire or paper clips and so on. When turned on, there is a significant vibration of the engine, which causes chaotic to crawl the toy.

Other ideas

In addition to all of the above, the motors are used in such selfiems as the minides and bormets. There are no extra details in such devices. They have one task - to rotate the fixed drill.

To do this, on the axis of the motor, the collet or ordinary cartridge is selected, which will clamp a small drill. Then they solder the wires from the engine to batteries through the switch. When the collected device has successfully earned, it is placed in the housing from the antiperspirant or some other, which is most suitable for the motor with batteries. All this small device is placed in the palm of palm. The switch is always located under the thumb.

Such devices are necessary radio amateurs for drilling holes In printed circuit boards. They can also use cabinetries who are engaged in a thin volumetric wood thread. Only instead of drill, they insert finger microfresses for sampling and grinding hard to reach places.

As you can see, manifesting a little fantasy and zeal, a child with the help of parents can create original toys and other useful things.

Every day, creating something with your own hands is becoming more popular. So why not create a special thing when everything has to this? At the time when women are diligently engaged in embroidery, sewing, knitting, quilling, men can only make, repair, improve.

What to do from the motor?

Some parts in a broken and unsuitable technique can be applied at home. Quite often, men raises the question of what can be made from the motor. In fact, there are a lot of options, the main thing is patience, the ability to work with the technique and imagination.

As one of the options, you can make an excellent fan from the motor. Also from this detail people make cars, helicopters and other interesting things. All you need for full-fledged work (especially beginners) is special electronic circuits and radio parts. Of course, not to do in this case without faith in yourself and patience. Not the fact that everything will work out the first time, but if you try, the result will be happy to please the master.

Helicopter from Motorchik

Deciding with what can be made from the motor, it is worth thinking about how this thing is created. Special schemes and spare parts are sold in stores that will help cope with this difficult task and understand the trifles. Sometimes even in the head does not fit, out of the motor, but in fact everything is very simple, you only need to pay due attention to this case.

So, to make a solid helicopter, you need to stock up with the following materials: models with drawings, tools, motors, glue, power supply and control panel. If the case is ready, it remains only to put a motor in it and connect with the control panel. After that, you need to try to run the helicopter, and then it will become clear, ready for use or has some problems that need to be eliminated. In the event of difficulties with connecting wires, it is better to contact a knowledgeable person, otherwise the items may be damaged.

Men are often interested in what can be made from the motor, besides the helicopter. Consider another option.

Machine from the motor

Make a machine from the motor is very simple. This requires schemes and boards that are sold in special stores. After the acquisition of everything you need can be proceeded. There are two versions of the machine: the case can be made independently either buy ready, which will make it easier for the work of the wizard. By purchasing a set, a person gets a car details, wheels, wiring, spare parts, a control panel and a motor itself (if any). It is worth noting that it will cost more than buy an ordinary finished machine, but also from the process you can get great pleasure.

Thus, it is quite obvious how to make a machine from the motor - just to buy a ready-made body and put the main part of the car there. Do not forget about the control panel, which you need to connect high quality to the toy. As a result, a person will get a homemade machine that will be cooler with any purchased. In addition, it can be improved, repaint and arrange as the soul.

In addition to the above, the charm of the manufacture of the machine from the motor is that the child will certainly appreciate all the parents' efforts, after which it will be immensely happy. You can build a miracle car along with children. This is a very entertaining and interesting lesson. Consider what you can do from the motor yet.

Fan

Self-modeling (this is exactly what some men are called themselves) constantly try to absorb as much new information as possible to make something new. It is absolutely not surprising that they are interested in those from the motor. To successfully carry out this operation, it will take the main detail of the design, battery, sleeve, flask and two old blanks.

At first, blanks are used (cut along the radius), then neatly with the use of fire you need to bend the blades. For the further stage of the work, a traffic jam from champagne is perfect, which you want to pull on the axis of the motor. After that, it is necessary to attach the blades and build a stand for the fan. Motor and all other details will be glued to the latter. Here is an easy and interesting way to make a fan.

Conclusion

Thus, it is quite obvious that many stunning things can be made from the Motor. The main thing is desire and patience. In addition, it is not impossible to relate to fantasy and intuition. No need to be afraid to spoil the product! Newcomers advise the use of old unnecessary things (as in the case of a fan). Experiment, everything will turn out!

The need for a miniature instrument exists where the person is engaged in the manufacture of souvenirs, models of ships and aircraft, small technical components and parts.

Miniaturization goes for two options. The first option provides for the manufacture of only miniature tools - disks, cutters, etc. The second option provides for the manufacture of a grinding tool based on miniature electric motors.

First option - using drill + (video)

The first option has a simpler solution. Suppose you need to make a miniature grinding wheel, which will be installed in a drill or screwdriver. To do this, we can take a broken disk. On it, with the help of a caliper, draw the circle of the required dimensions. Then, on the drawn circle, we cut a future miniature disk. In his center drills a hole in which we insert a bolt with a diameter of 6 mm. Bottom wear a washer and tighten the nut.

The bolt will be the axis of rotation of the disk. It is inserted into the cartridge of a drill or a screwdriver and clamp. Such a tool can cut materials in hard-to-reach places or having small sizes. You can grind ready-made details.

It is easy to make a miniature milling cutter for cutting small parts from plastic or wood. To do this, take an ordinary tin tube from a glass bottle. In the center they make a hole for installing the axis. The axis can serve as the same bolt with a diameter of 6 mm. The edges of the cork align and cut the cloves. It is advisable to make minimal marking.

This cutter charged to a drill or screwdriver is able to easily cut small wooden planks, for example, for modeling. Plastics are also amenable to this simple tool.

The second option is an independent assembly + (2 videos)

If the task is set - to make a miniature tool with your own hands, then it is necessary to initially select the electric drive. As an electric drive, a motor is suitable from various devices - printer, an old cassette tape recorder or from the usual children's electrified toy.

Depending on the power of the electric motor, you can build a mini grinder in two direction. The first direction is the use of a network power supply. For example, from the old mobile phone. The second direction provides for a fully autonomous model from the motor who will be activated from batteries or batteries.

The difference between two directions in the construction of the case. In the first case, the place will be required only for the electric motor, and in the second it will be necessary to install the battery compartment.

For the case it is very convenient to apply the PVC tube segment. If its diameter is slightly larger than the diameter of the electric motor, then the engine can be used to the engine. Create the engine with a glue gun.

As a plug, you can use corks that dress on PVC pipes during transportation and storage. In the front cork, it is necessary to do the hole for the motor shaft, and in the rear under the power wire. On the housing you need to fix the power connector and switch.

An ideal option will be able to fix some collet clamp on the shaft. This will allow you to use standard bors, drills and non-standard mini cutters and discs. If the collet clamp cannot be installed, you can connect the shaft and the cutting tool using double contact from the electrical shoe.

Similarly, you can make a housing and for mini grinders with autonomous food. Only after installing the engine in it, you must install the battery pack. Wires from batteries will be connected via a switch installed on the housing.

In both cases, homemade tools and standard industrial - bors and drills can be used on mini grinders.

The idea was born to make the mini fountain itself. The fountain design itself is a separate story, and this article will talk about how to make a pump for circulating water with your own hands. This topic is not new and has been described more than once on the Internet. I just show my incarnation in the life of this design. If someone is lazy to do, then such pumps are sold to Aliexpress in the area of \u200b\u200b400r (the price of February 2016).

So, proceed. A bubble from a drop for the nose was used as a hull. Who is interested, I will write the size of some details. So, the inner diameter of the bubble is 26.6 mm, the depth is 20 mm. In it, the hole is drilled slightly more from the back than the diameter of the engine shaft, and on the side of the water outlet (4 mm diameter). To it, first on superclauses, and then a tube is mounted on a thermoclay, on which water will be raised to the top of the fountain. Its diameter is 5 mm.

We also need a front cover. In it, in the center drilled a hole of 7 mm. All housing is ready.

Based on the shaft hole. The diameter of the base, you know, should be less than the diameter of the housing. I have about 25 mm. In fact, it is not necessary at all and is used only for strength. The blades themselves can be seen in the photo. Made from the same box and trimmed by the diameter of the base. Glued all superclaim.

Rotate the impeller will be the engine. It was most likely to be taken out of some kind of toys. I do not know the parameters, so the voltage is more than 5 V did not raise. The main thing is that the engine was "job stitch".

I tried another at a speed of 2500 rpm, so he very low raised a watery post. Next, you need to collect all and well blend.

And now the tests. When powering 3 in consumption current 0.3 A in load mode (that is, immersed in water), at 5 V - 0.5 A. The height of the lifting of the water column at 3 V is 45 cm (rounded in a smaller direction). In this mode, he left in water for an hour.

The test stood fine. How long he will serve - this is a good question for which only time can answer. When nutrition, 5 volts water rises to a height of 80 cm. All this can be seen on the video.

Video

Separately about noise. On land, it is quite audible. Under water at 3 V in complete silence, there is quite a bit of the pump noise. Behind the marching water is not heard at all. So we can conclude that for the fountain, and for others, it is quite suitable. With you was Sssahekkk..

Discuss an article how to make a pump from a motor