We build furniture with your own hands. Interesting ideas to create furniture with their own hands, options for home and cottages. Fasteners and adjustment of internal filling

With the arrangement of the living space, the furniture plays an important role. She can decorate the interior you have created or spoil the entire appearance of the room. Therefore, it is worth considering her choice. If you are looking for original solutions, you may encounter the fact that the market has a wide variety of furniture of one type of MDF and a similar material.

If you look at the furniture from the tree, then its prices may seem values. Given this, many homemade craftsmen decided this problem by doing wood furniture with their own hands. In this article we will tell about how and where you can use this furniture. The main question is how wooden furniture is manufactured with their own hands.

What to do is best

To begin with, it should be understood from which it is best to perform the manufacture of furniture made of wood, or rather, from which breed of wood. Remember, high-quality wood does not necessarily have a high cost. So, as a basis, you can take special wooden shields that can be made from a solid piece of wood or prepare by pressing.

Regardless of which material you will use, the process of producing furniture made of wood requires a special approach. So, you need to select the basic material correctly. Wood is divided into two categories:

1. Soft.
2. Solid.

It is easier to work with soft, but it is short-lived and is subject to mechanical effects, that is, after impact, traces / dents may remain. As for solid, it is more difficult to work with it, but it has a much long operational period. To speak for wood, then among solids can be allocated:

• Acacia.
• Ash.
• Apple tree.

This material can be used in the manufacture of frame furniture. That is, the furniture that will be subject to serious loads. As for soft breeds, this list includes:

• Fir.
• Pine.
• Juniper.

From these wood breeds, decorative parts are preferably made, which are not intended for high loads.

When choosing wood, the conditions for the operation of future wood furniture should also be taken into account. So, there are rooms in which the level of humidity is significantly increased. As a result, one wood should be chosen, which is resistant to the negative impact of moisture, that is, moisture resistant. For example, the blender of the bathroom can be used the following wood species:

• Linden.
• Cedar.

So, if you split it all by category, then this picture may turn out. Furniture frame is often manufactured from pine and other soft wood. Also done all sorts of decor. Among the more reliable rocks is a beech. However, he is unstable to moisture.

As for oak, his excellent characteristics, both hardness and appearance, are very popular in the manufacture of chest of drawers, beds, cabinets and so on. If you want to make a coffee table, then the optimal option is to be birch. From it you can make chairs, tables and other items.

Tip! You can not always use an array in the manufacture of wooden furniture with your own hands. You can use a healthy material, such as pallets, bars, logs, and so on.

Features of the production of furniture in the workshop

To understand all the difficulties of the upcoming work on the manufacture of wooden furniture with their own hands, we suggest familiarizing yourself with the process of its production in the conditions of the workshop. So, all raw materials are necessarily kept in a special warehouse. There is also a workshop, which provides for a room for assembly and painting. Mandatory there is a drying chamber. After, the furniture goes to a warehouse with finished products.

In the process of its manufacture, specialized equipment applies. A large number of processes are automated by means of installed machines. For example, such equipment can be used:

• Grinding machine.
• Raysumovoy machine.
• Edgebanding machines.
• Machines for linear planing and so on.

However, at home this may not be. Therefore, we suggest you consider the features of the process of how to make furniture with your own hands.

We make furniture with your own hands

No matter what kind of wood furniture you make, the whole technological process will consist of the following steps:

1. Marking.
2. Cooked all billets.
3. Processing billets.
4. Drilling technological mounting holes.
5. Assembly of all parts in one design.
6. Painting.
7. Varnish.
8. Drying.

As for the combination method, there are two types in the manufacture of wood furniture:

1. Connect connection.
2. Low connected connection.

Now consider important nuances of how furniture made of wood:

• Children's
• For gazebo.
• For giving.

For the children's room

In this case, it is extremely important to repel from certain requirements that are presented to wood furniture for the children's room. First of all, the finished product should be environmentally friendly, safe and convenient during operation. Also, such furniture should not fall out of the overall interior.

Plus to all, some requirements are presented for the treated surface. It should be missing any roughness. That is, all that can lead to a child by the child. As a result, everything should be treated with varnish or paint. As for the choice of coverage, it is better to choose a varnish-based lacquer. If we talk for the form, it is advisable to avoid sharp corners. This will reduce the likelihood of injury.

For gazebo

For arbor, wooden furniture do it yourself drawings and schemes can be found in this article. There are many original solutions for arbors. And in this you will be helped by ready-made drawings of furniture. So, for the table you can use a wide board, which is assembled in one tabletop design using a bar. The tabletop can be given a rounded shape. The surface is thoroughly polished and varnished. The legs, crossbars and discolitions are connected using self-tapping screws.

So, in any case, when choosing wooden furniture for a gazebo, the following nuances should be taken into account:

• What it will be laptop or built-in.
• If the gazebo is open, then the wood must be moisture-resistant.
• Determine the length and width of the bench so that it was convenient to sit on it.
• Stripping from the configuration of the arbor, determine the form and future furniture.

For dacha

In this case, you can use a variety of materials, for example, IV rods. You can weigh the armchairs and other exquisite wood furniture. You can also use pallets. But for this, they should be carefully treated, and at the end paint and open with varnish.

Important! If the furniture made of wood for cottages is made for the street, then think about it, in the period of rains and severe frosts, it was possible to carry it into the covered room. This will significantly extend the life of its operation.

Conclusion

So, we considered the possible options for how and from the tree from. Of course, you can connect fantasy in this matter. If it is missing, you look at the photo in this article. We also offer viewing a prepared video.

Modern furniture stores present a huge range of various furniture. However, for someone, she is too expensive, someone cannot pick up the model under its interior, and the third simplicity will not see the point of overpaying. For all 3 cases, an excellent solution will be the opportunity to make furniture yourself. In this case, it is primarily important to deal with the peculiarities of working with different materials.

The production of furniture with their own hands allows not only to realize its designer fantasies, but also significantly save on the purchase of new details of the interior.

Different materials require the appropriate set of tools. The following fixtures are included in the main set of furniturearet:

• screwdriver;
• hex key;
• screwdriver;
• electrode and drill set;
• confirmable drill;
• awl;
• pencil;
• roulette;
• corolnic;
• sandpaper;
• electrolovik;
• knife stationery.

Due to the variety of technical characteristics and ease of treatment, the chipboard is considered universal material used in the construction and production of furniture.

At home, almost any saw with small teeth can be used for cutting the chipboard. Even the hacksaw metal is suitable. The saw should be kept under a sharp corner to the stove. It is preferred to work with a disk saw or an electric bike. They need to saw on a small feed.

If you decide to make furniture yourself, intersect in detail in particular work and study possible difficulties. So, the chipboard requires additional processing to increase the strength and giving the finished furniture product of a beautiful view.

Making furniture from chipboard can with the use of varnish. This is a traditional processing method. For the purpose of additional alignment, the material is grinning and putty. Apply the varnish or laminating composition only after such processing.

You can make billets on the furniture yourself or order crucible plates in the relevant companies. The last option will allow you to save time, but will require additional cash investments. Select the necessary accessories in accordance with the selected furniture project. Make a choice in favor of high-quality products, it is categorically not recommended to save on accessories.

Split plates in accordance with the prepared sketch. You are very easy to connect them. To do this, you only need to take a drill, drill in the required places of the opening and copold the parts by self-draws.

The mounting of parts can be performed in different ways. For example, if you decide to make furniture, which will be built into the wall, use plastic or metal corners. Metal products withstand more serious loads. If you wanted to independently assemble the furniture of the body type, it is best to use EuroNes or confirm screws to fasten. These products allow you to get a fairly reliable and durable mount. But they have a drawback, which lies in the worsening of the appearance of the furniture. Another good option is the mount with the help of screeds. Perfectly suitable if you are going to make cabinet furniture yourself. The option is the most preferred, but also the most expensive of all considered.

Back to the category

Features of the assembly of natural wood

Having understood how to make furniture from wood, you can equip your home superior on its operational properties and appearance atmosphere. In this paper, there is nothing particularly difficult, you only need to do everything in a strict sequence, in compliance with a number of rules and recommendations. For example, a sequence of manufacturing a table of natural wood will be considered.

And make furniture from this material in the following order:

1. First you come to the store or market and pick up the feet of the future table.
2. Cut from the worktop of the desired size and form acquired in advance of the furniture shield.
3. With the help of sandwich and the rashpile handle the ends.
4. Print a pair of longitudinal ribs of hardness on one side of the table.
5. Install the legs on the screws.
6. Thoroughly handle all the surfaces with sandpaper.
7. Cover the product with furniture varnish and give it to dry.

Back to the category

Step-by-step instruction

There is nothing complicated and in the manufacture of upholstered furniture. First, an ordinary wooden product is made, and then it is simply squeezed by filler and cloth. To begin with, try making a soft stool. You can then move on to more complex products: Puriface, couches, sofas and chairs.

The main rule in the manufacture of upholstered furniture is not to save on materials. And the filler, and the upholstery must be a good quality. Making furniture yourself, you are pretty saved. In most cases, polyurethane or foam rubber is used as a filler. The layer density must be selected separately for each piece of furniture:

1. Seats require the use of filler with a density of about 48 kg / m³.
2. For the backs there will be enough 42 kg / m³.
3. The mattresses are usually manufactured using a filler with a density of 30-35 kg / m³.
4. For armrests there will be enough 28 kg / m³.

With the choice of upholstery fabric, not everything is so simple. First, it should be durable. Secondly, pick up such a cloth that can be washed without any problems.

The procedure for making upholstered furniture can be considered on the example of the manufacture of a couch. To do this, you will need:

1. Sketch. Compiled individually. You can focus on the drawing.
2. Legs - 4 pcs.
3. Boards - 4 longitudinal and 2 transverse.
4. Filler.

There is a huge variety of types of couches. Therefore, first choose the one that you like best. This example discusses the procedure for making a folding couch with a lumpy box. Size may also differ. Standard are considered the length of 2 m and the width of 60-80 cm. Specific values \u200b\u200bcan independently choose to their needs. If desired, focus on the same drawing. In your drawing, specify the height and width of the couch, the depth of her seating, the height of the armrests and the back, if there are such. Reflect on the sketch of the settings of the liner.

The frame is collected from 4 longitudinal and 2 transverse boards. The couch relies on 4 legs. Select them to your taste. To begin with, take the transverse panels and secure the guide bars on them. The latter will perform support functions under the lounge box. Secure the boards that will limit the movement of the base of the mattress. At the same time, they will be an element of the decor of the future soft couch.

Materials on prepared templates. Paired elements must have the same outline.It is also important that the shy edges exactly approached each other.

Even before the selection of the couch, make a mattress. It is very simple. Cover the rigid base of the desired thickness of the desired thickness and hover it with a decorative cloth. For the same principle, make armrests and the back.

Finally, only to collect all the details using special loops and fasteners will remain.

Back to the category

Features of wicker options

Wicker furniture will become a real highlight of your interior. It is done using such materials and tools:

• yves rod;
• plate;
• furniture stick;
• tape.

First you need to challenge the jerk rod. As a result of this processing, he will acquire a beautiful shade. Take a rather large capacity, fill it with water, put on fire, bring to a boil and lower the ventipers into boiling water. You need to cook an hour on a strong fire and about the same time on moderate. Usually 2 hours sufficient to obtain a light tone. If you need a darker shade, boil the rod 3-4 hours. Wood bars should be cleaned from the bark. Use for this split or rough glove.

Wicker furniture costs a lot, but looks exquisitely and harmoniously practically in any interior, so it is not only interesting to make it, but also profitable.

Immediately before work, the rods need to soak. At first they are soaked in water for an hour, and then another 15 minutes in a wet fabric. If necessary, the procedure is repeated. Bars must become elastic and flexible.

The process of weaving furniture will be considered on the example of the toaster. Having gotten up with the features of this case, you can make and more complex products. The stool will have a height of about 47 cm and the seat with a diameter of about 39 cm. For weaving such a stool, you need to take 4 screw sticks with a diameter of 5 cm.

The upper part of the rod need to beg. The bottom cut on half the thickness at a distance of about 11 cm from the edge. Need to leave thin ends. Innek 2 wrap. 1 of them should have a diameter of 28 cm, and the 2nd - 33 cm. The 1st will be the upper, 2nd - lower.

For the manufacture of pride, you will need 2 rods with a length of 42 cm and a diameter of 2.5 cm. The end of the prideeck must be distilled and cut at a distance of 6 cm from the edge. The upper strut is recorded on the same principle. Both rods strut must first begun, and then give them a semi-mold. The legs are attached to the upper hoop at the same distance. The hoop is enveloped by thin edges of the legs, after which they are nailed.

Next you will need to finish the frame assembly. Tilt the upper hoop with thin rods in a circle. At the edges of the lower and upper hoop should be laid openwork weaving. To obtain a soft seating from above, you need to put the foam rubber, and then once again lay the seat. So you will get a very soft, elegant and stylish stool. It will look great in almost any interior.

Furniture to furnish the apartment is not cheap. And although today the furniture market is quite wide, it happens that choosing the necessary items corresponding to the already existing design, or the headset that meets all the requirements is not so simple.

And here the wide field of activity opens for home masters. At the same time, as practice is evidenced, it is not necessary to have large chambers of the cabinetry or a joiner.

It is possible to make interesting items without much material costs and difficulties: it is enough to pay attention to the simple things that surround us and see the possibilities of their transformation or use to create new furniture elements.

Furniture made with your own hands will decorate any apartment

No one will argue that at home you can make high-quality furniture headsets of a sufficient level of complexity, even without having experiences of such work. But make simple comfortable and inexpensive furniture, which will be comfortable and beautiful - it is possible.

Its creation with his own hands has a number of advantages that will be used by the home Master:

• serious budget savings;
• independent choice of the most suitable material at an affordable price;
• the possibility of using objects available in the household that can be used to make new furniture elements;
• color range in the required designer solution.

You can order details Furniture for cutting on the layout, after which you collect it yourself

Designing of cabinet furniture, taking into account the interior of the room allows you to create furniture suitable in size and design

Our apartments are furnished with objects reflecting various stylistic preferences and financial capabilities, but the most acceptable option for the arrangement of residential and office space was the use of cabinet furniture:

• it is relatively inexpensive;
• has a high functionality;
• aesthetic looks;
• differs in compactness and good capacity;
• it is easy to install and maintain clean.

The base of cabinet furniture are boxes (boxes) of different sizes and configurations with or without doors, depending on the purpose, so the homemade masters most often independently make precisely furniture elements.

Nevertheless, it's not a simple matter, and requires serious preparation of the necessary materials and components. The rates will be the source for its manufacture, which will be connected fastener.

Details for assembling individual elements of cabinet furniture

To make cabinet furniture at home will need:

• plates of various sizes for shelves and boxes;
• fasteners;
• glue;
• other materials.

Accessories for the creation of cabinet furniture are:

• lifting mechanisms;
• loops;
• designs of extension and guides;
• separation systems;
• special products and accessories.

Furniture accessories and components for creating furniture of their own manufacture

Lifting mechanisms are presented in several species.

Mechanisms of transformation of furniture

Main material: LDSP

LDSP panels have a wide color gamut

The most affordable and inexpensive is the laminate (LDSP). It is widely used in the manufacture of furniture, and at the expense of its low cost almost completely replaced the tree. It is used for decorating structures.

LDSP production is based on the use of forest waste disposal, which is converted by hot pressing to the stove. Product components are binding to carbamide-formaldehyde resins.

Set of children's furniture from LDSP

The material is used for the manufacture of various types of furniture and individual parts, in particular, countertops, taking into account the properties with which it possesses:

• it can withstand high temperatures;
• separate species have moisture resistance;
• produced in a wide color and satellite palette;
• easily processed;
• withstands heavy loads;
• sold at an affordable price.

At the same time, LDSP is not an ideal material and has drawbacks. It is not suitable for creating figure parts and negatively refers to elevated moisture: when the water enters the water, the fat-resistant look swells and deformed.

In addition, it requires a neat handling when sawing, otherwise a varnish coating is damaged. A certain skill is necessary and when drilling a laminated surface.

Other materials

In addition to LDSP, other materials are used to make furniture with their own hands. It can be:

Wood and fibrous products are made in the form of pressed sheets. Fiberboard is suitable for manufacture:

• rear walls of Tumb and cabinets;
• shelves of sofas;
• drawers;
• various partitions.

Fiberboard has elasticity, so you can make betented elements from it.

MDF is also made in the stoves. When they are produced, a dry method is used, which is more modern and efficient.

For the production of veneer, it will take solid wood; For its manufacture, it is applied a way of impact or planing. Used to clamp various surfaces or in the production of plywood.

What tools you will definitely need

Tools that need for self-making furniture

Depending on the selected view of the model, which will be performed with your own hands, as well as the material, you may need a different set of tools. However, there is a list, without which it is impossible to do, for whatever the type of furniture neither the home master took. It includes:

• shurtpers;
• electrolovik;
• roulette;
• drill, screwdriver;
• set of desired fasteners.

Learning to make furniture

Learning to make various furniture items can independently can any domestic master. However, it is not necessary to count that this work will be easy, and everything will work out the first time. There are also failures, but that this does not happen, you need to know how to make furniture with your own hands. And you need to start with the simplest: benches, small tables, you can make a wardrobe, the design of which is quite simple.

Table and benches for gazebo, made with your own hands

The process from the sketch and the construction of the drawing, which should be carried out with the place where the self-made furniture and the parameters of the room and the product itself will be located.

Then you need to decide on the material from which the furniture will be manufactured. Experts argue that it is better for these purposes to take LDSP - the cheapest and affordable one.

Open white wardrobe from chipboard with their own hands

The next step will be the preparation of the tool that will be needed to perform work.

When preparation is completed, you can start directly to the manufacture:

• prepare details on the size provided (cut);
• carry out an element assembly by connecting them with fasteners;
• check the collected design for strength;
• install in the selected place.

If there is a desire, it is possible to decorate, decorating the product performed, in accordance with your aesthetic addictions.

Despite the fact that the chipboard is an affordable and cheap material, it does not mean that it does not have its own characteristics that need to be considered when using it. If they are ignored, then errors and failures cannot be avoided.

The main complexity of working with chipboard is sawing sheets. It is usually produced on special machines, access to which homemade craftsmen, most often, no. Large luck will be if it is possible to agree on an enterprise that has such equipment so that the material is squeezed on the necessary dimensions.

Crucified sheets of chipboard and LDSP require special equipment

But at home, most likely, this work will be carried out by an electric bike, which will inevitably lead to chips and wavy irregularities. The resulting "open wound" is exposed to moisture. And if it is not eliminated in a timely manner, the material will absorb moisture and very soon will begin to swell and lose its shape.

To avoid these troubles, you need to use a special edge that covers the spot. Today in the market you can find several of her species:

The cheapest is the melamine edge. Its without any problems can be pasted with the iron. True, it does not differ in quality.

Council. The polychlorvinyl edge will be the most optimal option, but it is possible to stick it only on special equipment. Therefore, if such an opportunity is, it is done immediately when the material is cut into the details.

The ABS edge is very similar to the previous one and has the same specifications, but is made of the best materials that are not hazardous to health and poisonous components.

The use of T-shaped mortise profile, which is inserted into the groove, made of the cutter - the phenomenon is quite rare.

It is convenient in the work of the home master of the P-profile. It is easy to stick to liquid nails. The only minus - the edges will perform a few millimeters, so dirt clogs under it, which means you need to follow the purity of the edges and to clean them in a timely manner. But this profile can be hidden a low-quality cut.

Features of the assembly of natural wood

Wooden pine products with their own hands

Furniture from wood is distinguished by the strength of reliability, durability, environmental safety. If preference is given to it, it is worth remembering that when assembling it is necessary to take into account the characteristics of the material:

• assembly to hold strictly according to the drawings;
• for self-making it is better to choose such rocks such as pine, birch, spruce, linden: their wood is softer and easier to process and assemble, but it is important to consider that coniferous breeds must be well dried so that the resin is discontinued;
• before installation, you need to handle the design details of the compositions that prevent rotting.

Features of wicker options

Furniture can be made not only of wood or chipboard materials. For a long time, the durable and beautiful products made by weaving are known for them:

• prucks willow, willow, rockers and other plants;
• roots of coniferous trees;
• birch bark (berson) used for weaving decorative elements;
• rattan - Rotan palm shoots;
• bamboo;
• mochal - lime bark
• and any curly plants with a fairly dense and flexible base.

Beautiful wicker furniture for home and street

Weaving can be used for furniture:

• fully made of vegetable raw materials by weaving various types;
• wooden, for decorative braid;
• combined, where various materials and furniture elements made of them are used.

With the help of weaving, different items are made: from chairs and stools to cabinets and dresser.

Frameless furniture with their own hands

Recently, frameless products have been specially popular. They are very convenient and able to provide comfort and comfort. At the same time, they are easy to make it with their own hands, even if there are no skills in work.

It is a two bag that is easy to sew, silent the cloth of the desired size. One of them is filled with filler; It is usually a polystyrene foam in a round-shaped granules, easily restoring the form after exposure to the load. The second bag is used as a case. It is performed from various dense tissues of different colors, natural or artificial leather or combined from different materials. In order to more convenient the bag with the filler, the side of the cover is stitching the robust "lightning".

Frameless chair from old jeans with their own hands

It is very convenient for children, since it does not have sharp and hard surfaces, and also easily restores the form. She uses when conducting various holidays, parties, if the chairs are clearly lacking.

Attention! For the manufacture of frameless furniture, special reinforced threads will be required.

How to make furniture from chipboard do it yourself

Homemade masters who even have the minimum work experience in making furniture, argue that making furniture from LDSP is not so difficult.

The simplest option in this case is to order on the drawing in the company. Consulted material on the necessary elements, after which you get a finishing edge in the store, then connect the parts in a convenient way (using fastener or special glue) and glue it.

If we cannot cut the blanks from professionals, you have to do it yourself.

How to avoid mistakes in the manufacture of furniture

The main problems when they make furniture with their own hands, occur in cases:

• the dimensions of the parts are incorrectly defined;
• incorrectly selected material;
• the dimensions and set of fasteners do not correspond to the furniture parameters.

To avoid unpleasant surprises, it is important to take into account these features.

Finishing Stage - Decoration

When furniture "masterpieces", made with your own hands, are completely ready, the last barcode remains decorating. And here - a full scope of fantasy! Depending on the material from which the furniture was made, it can be decorated:

• painting acrylic paints;
• mosaic panel;
• translated pictures, covering varnish;
• to conduct artificial "actions" by the method of cracker;
• use decoupage features

and other ways to decorate products.

Video: furniture do it yourself

In recent years, for the creation of an individual design of the dwelling, the interior is increasingly people are taking literally with their own hands. And if they start with accessories and items of the decor, the gradual transition to the manufacture of more complex things does not cause himself to wait. It can be furniture items for the kitchen, living room, hallway, in a nursery.

To do this, you need to understand the general principle of the process of creating interior items. Basis base is a good sketch. If the drawing skills are not perfect, it is better to watch furniture sketches on the Internet or specialized magazines. It is not necessary to repeat exactly in exactly, you can transform one or another subject to your requests.

Consider performing measurements on the example of creating a kitchen headset with your own hands.

Strengths have their own laws, because the drawings are based on exactly the extinted parameters:

• If you do a kitchen set, or some thing for the kitchen, you need to know the length of the walls.
• Then the height of the room walls is measured.
• If the standard sizes of kitchen cabinets are taken as the basis, they will be the following: the height of the floor cabinet - 85 cm, the depth is about 50 cm, the width is from 30 to 80 cm.
• Hinged cabinets are made either according to the same parameters or in a reduced version.
• The distance from the hinged cabinet to the floor - 65 cm.

All numbers are only a standard, averaged size, which can be changed under the features of the kitchen and the growth of the hostess. The next time is the size of the home appliance, which is filled with the kitchen.

Now these sizes need to be transferred on paper. Today it can not be done manually, the drawings are often compiled in special graphics programs.

Library of furniture drawings (video)

Correct calculation of sizes

Each piece of kitchen headset is calculated separately. All items are detailed, samples are composite parts. For instance, the kitchen cabinet is written as follows.:

• Rear panel - size;
• Side walls - size;
• Doors - size;
• Shelves - size.

Retractable boxes are detailed separately. Indicate the fastening places of fittings. All dimensions are indicated with strict accuracy so that the drawings are without errors.

Upholstered furniture do it yourself drawings

To create upholstered furniture tedious not only to create a drawing with your own hands, but also to choose the case. And the list of desired materials includes:

• Boards
• Bars
• Filler,
• Upholstery fabric
• Sheets of fiberboard and chipboard,
• Bars
• Twine,
• Sharp knife
• Drill,
• Screwdriver
• Stapler
• Sewing machine
• Threads
• Self-tapping screw
• Screwdrivers
• Pliers,
• Glue,
• Stub
• Keys in the set,
• Manual saw.

Having even small skills to create simple designs and using these tools, you can figure it out in a more complex technology. The success of the enterprise will depend on how high-quality materials you use.

Upholstered furniture requires filler, syntheps fit for this purpose perfect. A good alternative to his horse hair, but the cost of the latter seriously exceeds the costs of a synthetic procession. Porolon will also fit the only remark - choose the foam sheets of medium elasticity.

Work begins with the creation of a frame. When individual elements are created, and drawings will be required. Marking of parts is applied to the material, after which the blanks are cut.

The first fitting will show whether the design and drawings are coincided - the details must be docked with each other. If there are no matches, it is necessary to adjust the details immediately.

Kitchen corner do it yourself (video)

The advantages of furniture made with their own hands

For the kitchen, or for another room, interiors, items, such structures have undoubted advantages:

• High quality - Since you yourself choose material, accessories, control all stages of the creation process;
• Significant savings - Purchase of materials, here all expenses;
• Creating a single interior ensemble - the furniture created with its own hands is easier to make the interior harmonious;
• Acquisition of experience and moral satisfaction from the work done.

In addition, non-standard size of the room, corners and protrusions require appropriate furniture.

Special design programs

These programs greatly simplify the design process. They help produce the right size calculation and not only. Using programs you can:

• Create a sketch a certain thing;
• Create design project, for example, a headset for the kitchen;
• Narrow selection of materials up to a certain category;
• Choose decor options, finishes, fittings;
• Build 3.D. model future design;
• Optimally placing parts on a sheet - precise cutting of sheet material;
• Drive the cutting process material.

In a word, you can computerize the entire process, thereby guaranteed to avoid errors, and everything that is difficult to do with your own hands, perform on the computer.

Creating a kitchen project with Kitchendraw on a computer (video)

Conclusion

The creation of any interior items is a difficult matter, but quite satisfying and unprofessional. The accuracy of measurements, drawings, weapons with modern computer design programs will simplify this process and will create a really high-quality, original thing that will last the owners for a long time.

It has long been as the basis for furniture, use chipboard (wood chipboard). For those who have minimal work skills with wood and carpentry tools, homemade furniture will give the opportunity to significantly save the family budget. DSE furniture with their own hands will be exclusive and will take a worthy place in your apartment. All you need to work can be found in specialized stores.

To repair or assemble the furniture from the chipboard itself, a small set of materials and tools are needed. All you need to find at home, or buy for a small price.

Supports such tools:

• Small drill or screwdriver. Of course, it is better to use a small and not heavy drill to build furniture;
• Disk saw, milling mill, electrolybiz. If there are no these tools, they can be hired;
• Level, square, roulette;
• Set of hex keys, cenks, drills;
• Conductor.

Materials will be needed:

• Chipboard plates;
• Wax right color;
• Flomaster for retouching or marker of necessary shades;
• Excopustable;
• Felt fabric;
• Staple.

With such a small set, you can update the furniture and make a new one.

Manufacturing process

Cutting the chipboard is carried out on their own or turn to professionals having the necessary equipment. In addition to the chipboard, in the manufacture of furniture, you will need fiberboard (fiberboard), sawn timber, fittings, fasteners.

To make an easy update, the master class of which is offered by experienced professionals, well for everyone. As a result, it turns out a beautiful, completely new product, and the family budget will not suffer. The most important details of the structures that need to pay the most attention and time are:

• The facades are the front, part of the furniture and its doors, are made from more attractive material. Furniture from LDSP with their own hands should look attractive. The facade is a separate part of the furniture, it is usually placed to order. There are many different types of facades for furniture, they differ in the material used and design;
• The bottom and side walls of the boxes are these elements of furniture, as some other parts do, the easiest way to do from the fiberboard. Some wizers are preferred to fix the Fiberboard, but it is wrong. After some time, the brackets will break, and then the whole design can squeeze. Fiberboard is best fixed with self-drawers or nails, to install a self-tapping screw with special washers;
• The countertop is a horizontal surface where you can write, read. Most tables performed at home (photos are presented below), made from the same chipboard. The weak part of the tabletops - spice the surface. They are most often protected by the melamine edge, for this reason they begin to break in the first year. To prevent this trouble, the edges are closed by aluminum profiles. Fasten countertops from below, with the help of small screws, so as not to damage the facial surface.

Correctly pick up fasteners and fittings are no less important than high-quality materials. Furniture fasteners are necessary for connecting individual parts. Basically, all elements are connected at right angles.

1. SCacks - schemes for their installation, imply the use of pre-prepared holes. They are used for pre-fastening and increasing the strength of the connection;
2. Furniture corners - common, but already outdated a variety of fastening. They look not too beautiful, over time they are loosened;
3. Evrovint - screws for connecting furniture parts.

Holes are made directly by place, using a special drill capable of drilled the grooves of the required diameter. The question is how to make furniture with your own hands, requires control of perpendicularity of drilling direction, so as not to spoil the furniture element. When connecting items, it must be considered subtleties:

• Furniture screws are screwed using a hex key. Heads intended for a crusade screwdriver will not be completely spinning;
• The main disadvantage of this mount is completely twisted heads are visible. To hide them, the holes are closed with plastic plugs of suitable color;
• Eccentric ties - comfortable, modern attachment method. It allows you to make a hole from the inside of the furniture element.

To make the openings of the desired size, use the forster drill. It is not rationally to buy it only to build hidden elements, but they are convenient for installing the door. With how to repaint furniture at home, even a novice wizard there should be no problems, and step-by-step recommendations will help to collect new products.

Table top

Bookcase

Each person loving books faces the need to store the library. The easiest way to purchase a ready-made cabinet, but you can save a lot of money and manufacture or renovate furniture from chipboard. The easiest way to make a classic version of the cabinet with open shelves, which can easily fit in any room. The perfect depth for this furniture is 400 mm, total dimensions - 2000x800x400. (height width depth). Most of the books can safely fit on such shelves.

You need to start working with drawing, separately portraying all the details. Then transfer the part to the chipboard. Next are the cutting and other steps:

1. The assembly needs to be produced on a flat surface not to squeeze the design;
2. We connect the top of the cabinet and the side walls. It is necessary to use a special square that the angles turned out to be smooth;
3. With the help of fixing elements, all elements are connected;
4. By installing the top of the cabinet, attach the bottom, controlling the correctness of the compound by the coated;
5. The rear wall is not rushing, it is more convenient to install the shelves first. It is better to secure the confirmation in several places. This will give reliability and increase the service life of the shelves;
6. At the end fasten the back wall;
7. In conclusion, mounted supports.

Preparing elements

Connect the back and side parts

Installing Polozena

Krepim shelves

We make additional supports

Ready product

TV table

Although the models of TV devices are now common, which are easily attached to the wall, there are quite a few devices for which special stands are needed. After all, you need to find a place not only for the TV, you may want to install a home theater, the remote, find the shelf for the disc collection. Having made an independently convenient standard for a TV, you will not only save money, but also you can take into account all your desires - style, how to paint furniture from DSP with your own hands.

For the product, the most convenient dimensions of 600x400x1850 mm (height - depth - width). The bedside table is placed directly to the floor, it can withstand serious loads. The manufacture of furniture of this size will make it possible to easily place even a large TV, and near it is the rest of the necessary technique.

1. First collect the framework of the couch under the TV;
2. Put the marks for fixing the middle shelf, make holes and install it in place;
3. From the elements of 0.12x0.45 mm, collect frameworks for drawers. Then fasten the bottom of the plywood on them, on glue or nails;
4. Install the fittings for moving drawers;
5. Secure the handles on drawers;
6. Milling prepare a place to install the door, and secure them;
7. At the end of the assembly, fasten the top panel.

Prepare details

Screw bars on the sides

Fix the facial part

Fix the shelves for boxes

We make a box, fix the elements by self-draws

Computer table

Computer, after refrigerator and television, the most popular object in the house. For this reason, and the table, followed by which we work, should be suitable. A computer desk is a piece of furniture with different devices and details that can be adjusted if necessary. In addition, an independently manufactured option will cost much cheaper than in the store.

In the manufacture of the table, you can simplify work and limit in its design with straight lines. Additional shelves, wiring holes, a space for the system unit can be made as you want.

The designs of such tables have a huge amount, there are special tables used for a netbook or laptop. In small apartments, comfortable transformers. A narrow item will not require a lot of space, and if necessary, turns into a normal computer desk, with all the necessary elements.

For self-execution it is better to choose a simple model, rectangular shape. By drawing a drawing and cutting all parts using a disk saw or an electric bike, you can start assembling:

1. In the central and side walls prepared holes for fastening the lower shelf. After that, secure it with the confirmates;
2. The upper shelf is also fixed;
3. After that, the rear wall is installed. It is on the same level with the upper parts of the central and side walls;
4. Now it is necessary to fasten the guide elements for the retractable console under the keyboard;
5. The countertop is fixed to the side walls of the wanks. It is impossible to make through holes in the worktop;
6. If you plan to make the shelves on top of the countertops, they are also attached to the wanks.

Cut the details

Rules of safe finish

1. The chipboard must be cut into pieces slowly, for this it is better to drink with a small tooth - you will get a flat line of cutting. You need to drill smoothly using only acute drill and turning the high drill speed. It is necessary to control the perpendicularity of the drilling of drill to the material, otherwise it is possible to make choles in a noticeable place. For removal of irregularities, a rashpil and plans are needed, the tool is moved from the outside of the workpiece to the inner. It is important to prevent the fiber breaking - so the part of the part will be neat;
2. The laminated chipboard is not necessary to process, you only need to smooth the edge. The rest of the surface is painted, covered with varnish or glue a special film. Adhesive tape is used to protect the surface from splitting during sawing. If you cut manually, it is necessary to have a saw with a slope. The edge of the detail covered with the teeth is an unpleasant sight, especially this is noticeable on the plates of the White Fiberboard. Saw the material slowly, the extra hit will cause an ugly junction between furniture elements;
3. Stupid or slowly rotating drills, in most cases, the edges of the opening are taken out. Only with the help of acute and high-quality drills, you can make a flat hole. With a good cut, you will not need additional processing. The disk saw when working, leaves the edge of the irregularities that are removed by the plane. He carefully leads around the edge, to the inside, so that the edge becomes neat. For laminated plates, you should not use the rashpy;
4. Separate the surface of furniture from the fiberboard, you can 2 ways - how to paint furniture from chipboard, and fade with decorative material or to cover varnish;
5. Often, cladding is carried out with a special film, which has an adhesive coating on one side that simplifies the furniture. It is unusually delicate, for this reason the surface before pasting you need to polish well. You can stick a layered plastic, it is stronger and more thicker. It is glued by special glue, such a coating makes furniture from chipboard beautiful and at the same time protects the surface from external influences;
6. Typically, wood products are lacquered, chipsticks are covered with varnish very rarely, only if it is necessary to "reflect" the unattractive view of the ordinary plate. Before varnishing the surface must be aligned with putty. It even after the factory processing (without lamination) needs alignment. The smallest defects will be noticeable under the lacquer film, and it greatly worsens the appearance of the furniture. After putty chipboard, a very flat surface should be turned out, and one layer of varnish should be enough for it. If defects are noticeable after the lacquer, then it will be necessary to abandon the surface of the sandpaper and turn the lacquer again;
7. The layer of protective varnish should be thick, it prevents harmful evaporation. You need to pay attention to the joints - you need to do the most densely as possible. For chipboard, wallpaper and matter are not suitable, these are porous materials that are not able to serve protection. Also to pass harmful substances can carpet;
8. The edges of the Fiberboard plate, can be separated with thin wooden planks. Wood picks up suitable in color, the material must be harmonized with the coating of the furniture item. When you beat the desired number of wood planks, you need them, like the entire surface, cover with varnish, or completely repaint furniture. Even a strip of 5 mm thick protects the edge of the plate. If you stick a wide bar, then it will prevent cooking bend.

Drawings and schemes